Home

Chief SLB023 mounting kit

1. INSTALLATION INSTRUCTIONS SSB 023 SSM 023 SLB 023 and SLM 023 Interface Brackets SSB 023 SSM 023 SLB 023 and SLM 023 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 4 6 10 24 Thumb Nuts 1 1 Screw Phillips Pan Head Machine M4 x 8mm Screw Phillips Flat Head Machine M4x 20mm 1 2 x 194 x 3 8 Nylon Spacer Washer Flat M4 1 All Points Security Kit 4 Towards front of projector Towards front of projector SLB 023 SLM 023 Note SSB style interface bracket connections Note SSM style interface bracket connections are encircled are encircled Only used when installing SLB SSB interface brackets Used when mounting surface of projector is recessed NOTE Specific to SSB style and SSM style interface bracket installation all appropriate screws come pre installed as reflected in the encircled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardwar
2. Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document EN o Chief Manufacturing a products division of Milestone AV Technologies 8850 000020 Rev01 ICJ Al E 8401 Eagle Creek Parkway Savage MN 55378 2009 Milestone AV Technologies e P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group adr Our Mounts Your Vision
3. e for SSB style and SSM style interface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface bracket NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 1 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time 2 Turn projector upside down 3 Place 3 8 spacer over center threaded insert in bottom of projector 4 Place interface bracket onto projector bottom align center hole in bracket with spacer and the mounting holes in bracket with threaded inserts in projector Place M4 x 20mm Phillips flat head screw over center mounting hole leave loose Using M4 x 8mm Phillips pan head screws with M4 flat washers and the M4 x 20mm Phillips flat head screw secure interface bracket to projector Tighten all fasteners at this time NOTE Security screws can be substituted when mounting interface bracket to projector by using the parts and installation S instructions in the All Points Security Kit K SA Chief is a registered trademark of Milestone AV Technologies All rights reserved rcon Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However

Chief SLB023 mounting kit

Contents

Download Pdf Manuals

Related Search

Related Contents