Panamax MIW-Dual Signal Bay
Contents
1. PANAMAX MAX IN WALL DUAL SIGNAL BAY INSTALLATION INSTRUCTIONS STEP 1 Select a location close to the equipment In the case of a flat panel display the recommended location is one that is behind the device and hidden from view once the Plasma TV is mounted Cut a 4 wide by 3 3 4 high hole in the wall for the mounting bracket STEP 2 gt Run the signal line s through the mounting bracket LL Install the mounting bracket in the hole a gi EA a STEP 3 Remove the rubber plug from one of the Signal Bay Pass Throughs Cut a hole in the rubber plug so that it fits snugly around the signal line Pass the signal line through the Signal Bay Pass Throughs place the rubber plug over the signal line and put the rubber plug back in place STEP 4 es Install the Max In Wall Dual Signal Bay into the mounting bracket and secure with the included screws Ground Wire STEP 5 Repeat steps 1 4 for the Dual Signal Bay located at the source components NOTE In order for the signal protection modules to protect against surg es the ground wire on the Max In Wall Signal Bay may be con nected to the ground wire on the Max In Wall Power PRO that is installed nearby less than 1 foot away Simply connect it with the same wire nut that is used to connect the Max In Wall Power PRO to the building wire Signal Protection Module Usage Panamax In Wall signal protection modules sold separately wh2. ile not necessary for surge protection in the Max In Wall Dual Signal Bay may be used to provide a clean looking interface for the signal lines When used in the proper manner the modules also provide total protection to the connected equipment F PAMARAAN INS00811 REV A 03 07 1 MAX IN WALL DUAL SIGNAL BAY SPECIFICATIONS Summary of Features Accommodates two blank module inserts with pass through plugs included or two InWall signal protection modules sold separately Full metal housing Enlarged faceplates 4 5 x 4 5 to accomodate oversize wall cutouts Fits into many two gang outlet brackets old work low voltage Caddy brand outlet bracket model MPAL2 included 14 AWG solid wire connection for bonding grounding to In Wall AC units Provides an elegant convenient solution for connecting signal lines from the source device to the display device when running cables within the building walls Specifications are subject to changes due to product upgrades and improvements CONTENTS CONTACTING PANAMAX Panamax 1690 Corporate Circle Petaluma CA 94954 Phone 707 283 5900 or 800 472 5555 Fax 707 283 5901 One MAX In Wall Web www panamax com signal bay enclosure Customer Relations 7 30 AM 4 30 PM M F Pacific Time Email custrelations panamax com Included Installation Accessories 4 Mounting Screws 1 Mounting Bracket
Download Pdf Manuals
Related Search