Shuttle SH67H7 barebone
Contents
1. 200mv 250mv 300mv SB 1 05 Voltage Set SB 1 05 Voltage Set Parameter gt The choice Auto 50mv 100mv 150mv 200mv 250mv 300mv Integrated Graphic Vol Integrated Graphic Voltage Set Parameter gt The choice Auto 50mv 100mv 150mv 200mv 250mv 300mv da gt Ya Chipset Aptio Setup Utility Copyright C 2010 American Megatrends Inc Initate Graphic Adapte PEG IGD Initate Graphic Adapte Select which graphics controller to use as the primary boot device gt The choice IGD PEG IGD IGD Memory IGD Share Memory Size gt The choice IGD 32M 64M 128M High Precision Timer Enabled Disabled the High Precision Event Timer gt The choice Enabled Disabled a Boot Select the Boot tab from the BIOS setup screen to enter the Boot BIOS Setup screen You can select any of the items in the left frame of the screen such as Boot Settings Configuration to go to the sub menu for that item You can display an Boot BIOS Setup option by highlighting it using the lt Arrow gt keys All Boot BIOS Setup options are described in this section The Boot BIOS Setup screen is shown below The sub menus are described on the following pages Aptio Setup Utility Copyright C 2010 American Megatrends Inc LAN Boot ROM Disabled LAN Boot ROM Enabled Disabled LAN Boot Option ROM gt The choice Enabled Disabled BIOS Write Protect E2. Setup The password is required only when users try to access to BIOS SETUP UTILITY The password is required every time when the Notebook is powered on or when users try to access to BIOS SETUP UTILITY Always To clear a set Supervisor Password User Password just press Enter under Change Supervisor Password Change User Password field when you are prompted to enter the password Please note that when Supervisor Password has been cleared User Password will be cleared as well A message box will pop up confirming password will be disabled Once the password is disabled the system will boot and user can enter setup without entering password 21 da gt Ya Save amp Exit Select the Exit tab from the BIOS setup screen to enter the Exit BIOS Setup screen You can display an Exit BIOS Setup option by highlighting it using the lt Arrow gt keys All Exit BIOS Setup options are described in this section The Exit BIOS Setup screen is shown below Aptio Setup Utility Copyright C 2010 American Megatrends Inc Save Changes and Exit 22 Save Changes and Exit When you have completed the system configuration changes select this option to leave BIOS Setup and reboot the computer so the new system configuration parameters can take effect Select Save Changes and Exit from the Exit menu and press lt Enter gt Save Configuration Changes and Exit Now Ok Cancel appears in the window Se
3. A The lt F8 gt key on your keyboard is the Fail Safe key It is not displayed on the BIOS key legend by default To set the Fail Safe settings of the BIOS press the lt F8 gt key on your keyboard It is located on the upper row of a standard 101 keyboard The Fail Safe settings allow the motherboard to boot up with the least amount of options set This can lessen the probability of conflicting settings Ya Main Setup Ra ne 00 c LLJ When you first enter the BIOS Setup Utility you will enter the Main setup screen You can always return to the Main setup screen by selecting the Main tab There are two Main Setup options They are described in this section The Main BIOS Setup screen is shown below Aptio Setup Utility Copyright C 2010 American Megatrends Inc system Date System Time System Date Use this option to change the system time and date Highlight System Time or Sys tem Date using the lt Arrow gt keys Enter new values through the keyboard Press the lt Tab gt key or the lt Arrow gt keys to move between fields The date must be entered in MM DD YY format The time is entered in HH MM SS format The time is in 24 hour format For example 5 30 A M appears as 05 30 00 and 5 30 P M as 17 30 00 da gt Ya Advanced Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS Setup screen You can select any of the items in the left frame of the scree
4. gt key is used to invoke the BIOS setup screen There are a few cases that other keys are used such as lt F1 gt lt F2 gt and C so on BIOS Setup Menu The main BIOS setup menu is the first screen that you can navigate Each main BIOS setup menu option is described in this user s guide The Main BIOS setup menu screen has two main frames The left frame displays all the options that can be configured Grayed out options cannot be configured Options is blue can be The right frame displays the key legend Above the key legend is an area reserved for a text message When an option is selected in the left frame it is highlighted in white Often a text message will accompany it AX AMIBIOSS has default text messages built into it The motherboard manufacture retains the option to include leave out or change any of these text messages They can also add their own text messages Because of this many screen shots in this manual are different from your BIOS setup screen The BIOS setup utility uses a key based navigation system called hot keys Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process These keys include lt F1 gt lt F10 gt lt Enter gt lt ESC gt lt Arrow gt keys and so on A There is a hot key legend located in the right frame on most BIOS setup screens Hot Key Description Left The Left and Right lt Arrow gt keys allow you to se
5. used by internal Graphics Device gt The choice 128MB 256MB Maximum lt WN 00 Cc LL gt USB Configuration USB Configuration Parameters PIONEER DVD RW DVR XDC Auto da gt gt Super lO Configuration You can use this screen to select options for the Power Management Configuration Use the up and down lt Arrow gt keys to select an item Use the lt Plus gt and lt Minus gt keys to change the value of the selected option The settings are described on the following pages The screen is shown below PHR On After PHR Fail Disabled PWR On After PWR Fail The system will be restore automatically to the previous power state before the power failure occurs gt The choice Enabled Disabled EUP Control Function Enable or disable EUP function gt The choice Enabled Disabled gt Serial Port Configuration You can use this screen to select options for the Hardware Health Configuration Use the up and down lt Arrow gt keys to select an item Use the lt Plus gt and lt Minus gt keys to change the value of the selected option The settings are described on the following pages The screen is shown below Ka ne 0 c LLJ Serial Port Enabled Serial Port Enable or Disable Serial Port COM gt The choice Enabled Disabled Cgange Settings Select an optimal setting for Super IO device gt The choice Auto I0 3F5h IRQ 4 I0 3F8h IRQ 3 4 5 6 7 9
6. 10 11 12 I0 2F8h IRQ 3 4 5 6 7 9 10 11 12 IO 3E8h IRQ 3 4 5 6 7 9 10 11 12 I0 2E8h IRQ 3 4 5 6 7 9 10 11 12 da gt gt CIR Controller Configuration Set Parameters of CIR Controller CIR CIR Controller Disabled CIR Controller Enable or Disable CIR Controller gt The choice Enabled Disabled gt H W Monitor Monitor hardware status Fan Speed Control Smart Fan Mode Fan Speed Control Fan Speed Control function gt The choice Smart Fan Mode Ultra Low Speed Low Speed Mid Speed Full Speed Power LED Brightness Power LED Brightness Control function gt The choice Auto Low Brightness Mid Brightness High Brightness Ka ne 0 c LLJ da gt gt Voltage Configuration You can use this screen to select options for the Hardware Health Configuration Use the up and down lt Arrow gt keys to select an item Use the lt Plus gt and lt Minus gt keys to change the value of the selected option The settings are described on the following pages The screen is shown below CPU Voltage Set CPU Voltage Set CPU Voltage Set Parameter gt The choice Auto 50mv 100mv 150mv 200mv 250mv 300mv CPU VTT 1 05 Voltage S CPU VTT 1 05 Voltage Set Parameter gt The choice Auto 50mv 100mv 150mv 200mv 250mv 300mv VDIMM Voltage Set VDIMM Voltage Set Parameter gt The choice Auto 50mv 100mv 150mv
7. E Motherboard Software Setup La al Auto Install Driver Utility User Manuals Link to Shuttle Website Browse this DVD www shuttle com m User Manuals Motherboard Manual Quick Guide Ev User Manuals La ES Shuttle MotherBoard Manual Ouick Guide Return to previous page www shuttle com Appendix Starting BIOS AMIBIOS has been integrated into many motherboards for over a decade In the past people often referred to the AMIBIOS setup menu as BIOS BIOS setup or CMOS setup American Megatrends refers to this setup as BIOS Specifically it is the name of the AMIBIOS8 BIOS setup utility This chapter describes the basic navigation of the BIOS setup screens Enter the BIOS To enter the BIOS setup screens follow the steps below Step1 Power on the motherboard Step2 Press the lt Delete gt key on your keyboard when you see the following text prompt Press DEL to run Setup Step3 After you press the lt Delete gt key the main BIOS setup menu displays You can access the other setup screens from the main BIOS setup menu such as the Chipset and Power menus A This manual describes the standard look of the BIOS setup screen p The motherboard manufacturer has the ability to change any and all of the settings described in this manual This means that some of the options C described in this manual do not exist in your motherboard s AMIBIOS 4 A In most cases the lt Delete
8. XPC User Guide For the SH67H3 SH67H7 Shuttle XPC Installation Guide Copyright 2010 by Shuttle Inc All Rights Reserved No part of this publication may be reproduced transcribed stored in a retrieval system translated into any language or transmitted in any form or by any means such as electronic mechanical magnetic optical chemical photocopy manual or otherwise without prior written permission from Shuttle Inc Other brands and product names used herein are for identification purposes only and may be trademarks of their respective owners Disclaimer Shuttle Inc shall not be liable for any incidental or consequential damages resulting from the performance or use of this product Shuttle Inc makes no representation or warranty regarding the contents of this ma nual Information in this manual had been carefully checked for accuracy however no guarantee is given as to the correctness of the contents For continuing product improve ment Shuttle Inc reserves the right to revise the manual or make changes to the speci fications of this product at any time without notice and obligation to any person or entity regarding such change The information contained in this manual is provided for general use by customers This device complies to Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must withstand any b
9. ackground interference including those that may cause undesired operation Trademarks Shuttle is a registered trademark of Shuttle Inc Intel and Pentium are registered trademarks of Intel Corporation PS 2 is a registered trademark of IBM Corporation AWARD is a registered trademark of Award Software Inc Microsoft and Windows are registered trademarks of Microsoft Corporation General Notice Other brand and product names used herein are for identification purposes only and may be trademarks of their respective owners Safety Information Read the following precautions before setting up a Shuttle XPC CAUTION Incorrectly replacing the battery may damage this computer Replace only with the same or equivalent as recommended by Shuttle Disposal of used batteries according to the manufacturer s instructions Laser compliance statement The optical disc drive in this server is a laser product The drive s classification label is lacated on the drive CLASS 1 LASER PRODUCT CAUTION NVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM Installation Notices Do not place this device Do not expose this device to high underneath heavy loads levels of direct sunlight high or in an unstable position humidity or wet conditions Do not use or expose this device Do not block the air vents around magnetic fields as magnetic to this device or impede the interference may affect the airflow in any way perform
10. ance of the device Driver and Software Installation Starting BIOS Save amp Exit TABLE OF CONTENTS EE EE A 1 Mainboard Diver YD 1 Us rManualS secie a e ds 2 EEE ENE EEE E 3 REE RT asd eee eee 3 BIOS Set p Men aiii nabo gasset 3 LE EL EE TE ii 5 PROVING A EE 6 ACPI Settings ee eee ee re eer 7 CPU Configuration edda 8 SATA GENT 9 Intel IGD Configuration eccerre inis aeaaeai 11 Super IO Configuration Ls 12 HAN Monet ten te Secreta Eee ae ea a Eugene 15 Voltage Configuration ss 16 CHIPS RE EE okie AN assed senna tases 18 SR E E E 19 SECUN ari e e E E E id 20 Driver and Software Installation m Motherboard Driver DVD The DVD contents attached in SH67H3 SH67H7 Series motherboard are subject to change without notice The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this Shuttle Xvision in a Windows OS Install these drivers after installing Microsoft Windows Insert the attached DVD into your DVD ROM drive The DVD AutoRun screen should appear If the AutoRun screen does not appear double click on Autorun icon in My Computer to bring up Shuttle Mainboard Software Setup screen Navigation Bar Description Auto Install Driver Utility User Manuals Motherboard Manual Quick Guide Link to Shuttle Website Link to shuttle website homepage Browse this DVD Allows you to see contents of this DVD
11. lect Ok to save changes and exit Discard Changes and Exit Exit system setup without saving any changes Discard Changes Discards changes done so far to any of the setup questions Destore Defaults Load Optimal Default values for all the setup questions 23
12. lect a BIOS setup screen lt Right For example Main screen Advanced screen Chipset screen and so on t Up The Up and Down lt Arrow gt keys allow you to select an BIOS setup item or sub Down screen i The Plus and Minus lt Arrow gt keys allow you to change the field value of a Plus Minus particular setup item For example Date and Time The lt Tab gt key allows you to select BIOS setup fields F1 The lt F1 gt key allows you to display the General Help screen Press the lt F1 gt key to open the General Help screen The lt F10 gt key allows you to save any changes you have made and exit BIOS Setup Press the lt F10 gt key to save your changes Press the lt Enter gt key to save the configuration and exit You can also use the lt Arrow gt key to select Cancel and then press the lt Enter gt key to abort this function and return to the previous screen The lt Esc gt key allows you to discard any changes you have made and exit the BIOS Setup Press the lt Esc gt key to exit the BIOS setup without saving your changes Press the lt Enter gt key to discard changes and exit You can also use the lt Arrow gt key to select Cancel and then press the lt Enter gt key to abort this function and return to the previous screen The lt Enter gt key allows you to display or change the setup option listed for a particular setup item The lt Enter gt key can also allow you to display the setup sub screens
13. n such as CPU Configuration to go to the sub menu for that item You can display an Advanced BIOS Setup option by highlighting it using the lt Arrow gt keys All Advanced BIOS Setup options are described in this section The Advanced BIOS Setup screen is shown below The sub menus are described on the following pages Aptio Setup Utility Copyright C 2010 American Megatrends Inc gt ACPI Settings gt ACPI Settings System ACPI Parameters Ka ne 00 c LLJ ACPI Sleep State Select the highest ACPI Sleep state the system will enter when the SUSPEND button is pressed gt The choice S1 CPU Stop Clock S3 Suspend to RAM Aptio Setup Utility Copyright C 2010 American Megatrends Inc ACPI Sleep State 53 Suspend to RAM Resume by RTC Alarm Enable or disable System wake on alarm event When enabled System will wake on the hr min sec specified gt The choice Enabled Disabled Wake On LAN Function Enable or disable system wake on LAN chip event gt The choice Enabled Disabled Wake Up By Rin Enable or disable system wake up by ring event gt The choice Enabled Disabled da gt gt CPU Configuration You can use this screen to select options for the CPU Configuration Settings Use the up and down lt Arrow gt keys to select an item Use the lt Plus gt and lt Minus gt keys to change the value of the selected option A description of the selected item a
14. nables Disables BIOS Write Protect control function gt The choice Enabled Disabled Ra ne 00 c LLJ da gt a Security Select the Security tab from the BIOS setup screen to enter the Security BIOS Setup screen You can display an Security BIOS Setup option by highlighting it using the lt Arrow gt keys All Security BIOS Setup options are described in this section The Security Setup screen is shown below The sub menus are documented on the following pages Change Administrator Password Change Supervisor Password When this item is selected a message box shall appear on the screen as below Enter New Password Type a maximum of 6 digit password and press Enter The password typed now will replace any previously set password from CMOS memory You may also press ESC to abandon new password setting When the Supervisor Password is set new items Change User Password and Password Check will be added in the menu 20 Select Change User Password to give or to abandon password setting same as Change Supervisor Password item above Note that Supervisor Password field allows users to enter and change the settings of the BIOS SETUP UTILITY while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change The Password Check item is used to specify the type of BIOS password protection that is implemented Settings are described below
15. ppears on the right side of the screen The settings are described on the following pages An example of the CPU Configuration screen is shown below A The CPU Configuration setup screen varies depending on the installed processor Aptio Setup Utility Copyright C 2010 American Megatrends Inc Hyper threading Enabled Hyper threding Enabled for Windows XP and Linux OS optimized for Hyper Threading Technology and Disabled for other OS OS not optimized for Hyper Threading Technology When Disabled only one thread per enabled core is enabled gt The choice Enabled Disabled Active Processor Cores Number of cores to enable in each processor package gt The choice ALI 1 Limit CPUID Maximum Ka ne 00 c LLJ Disabled for Windows XP gt The choice Enabled Disabled Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS Windows Server 2003 SP1 Windows XP SP2 SuSE Linux 9 2 RedHat Enterprise 3 Update 3 gt The choice Enabled Disabled gt SATA Configuration SATA Devices Configuration SATA Mode 1 IDE Mode 2 AHCI Mode 3 RAID Mode da gt gt Intel IGD Configuration Intel IGD Function DVMT Mode Select DVMT Mode Select Select DVMT Mode used by Internal Graphics Device gt The choice Fixed Mode DVMT Mode DVMT FIXED Memory Select DVMP FIXED Mode Memory size
Download Pdf Manuals
Related Search