Home

Samsung T27A950

1. Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e fa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or substances enters the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire English 8 Getting Started a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result ina p
2. It is important to give your eyes some rest 5 minutes every hour when viewing the product screen for long periods of time e This will alleviate any eye strain Keep the small accessories in a location out of the reach of children Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Be careful that children do not place the batteries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries Do not use new and used batteries together e This may cause a battery to break or leak and may cause fire injury or contamination damage Engish LO Getting Started Accessories amp Please make sure the following items are included with your TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models S Cables not included in the package contents can be purchased separately amp Check if there is no accessory hidden behind packing materials when you open the box e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Warranty Card Safety Guide Not available in some locations e Power Cord DC Adapter e Cable Holder e User Manual e Quick Setup Guide e 3D Active Glasses
3. E Using the Channel SMART HUB Channel ENTERL Channel Delete channels or set favourites channels and use the programme guide for digital broadcasts Select a channel in the All Channels TV Radio and Data Other screen Change the antenna or channel settings using the menus in the top right corner of the screen e Antenna Toggles among Air or Cable The option may differ depending on country e Sort Sorting By Channel Number or By Channel Name e amp Edit Mode Deletes channels assigned to Favourites Refer to Using the Favourite Channels for details on how to assign a channel to Favourite 1 Select the 2 Edit Mode icon on the upper right of your screen and then press the ENTERC button 2 Press the gt a w buttons to select a channel as a Favourite and then press ENTERL A check appears to the left of the channel amp amp You can select more than one channel amp amp Pressing ENTERC again deselects the channel 3 Select Edit Favourites at the bottom of your screen and then press ENTERC button The Edit Favourites pop up appears 4 Highlight a group on the Favourites list and then press ENTERC4 amp The Edit Favourites screen has five groups Favourites 1 Favourites 2 etc You can add a Favourite channel to any one of the groups Select a group using the up and down arrows on your remote 5 Select OK press ENTER L and then press ENTERL again e Using
4. ENTER L Sound Mode A mM Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies m m E Clear Voice Emphasizes voices over other sounds i Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired S ff Speaker Select is set to External Speaker Sound Mode is disabled E Adjusting Sound Settings M MENU 10 Sound Sound Effect ENTERC Sound Effect standard sound mode only S ff Speaker Select is set to External Speaker Sound Effect is disabled E SRS TruSurround HD Off On Gielen This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function technology E SRS TruDialog Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly mM SRS CS Headphone Off On You can hear virtual 5 1ch surround sound over the headphones E Equalizer Adjusts the sound balance bass and treble for the left and right speakers as required Balance L R Adjusts the balance between the right and left speaker 100Hz 300HZ 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equalizer to its default settings Engish gt 4
5. File Extension Container Video Codec Resolution Audio Codec fps Mbps DivX 3 11 4 x 5 1 6 0 1920x1080 6 30 8 avi AVI 1920x1080 6 30 MP3 AC3 LPCM K ee H 264 BP MP HP 1920x1080 6 30 nea irks MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 1920x1080 esw 8 DivX 3 11 4 x 5 1 6 0 1920x1080 6 s0 8 i MP3 AC3 LPCM ast ASF H 264 BP MP HP 1920x1080 fice MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 800x600 6 30 8 wmv Window Media Video v9 4920x1080 WMA H 264 BP MP HP 1920x1080 mp4 MP4 MPEG4 SP ASP 4920x1080 6 30 8 MP3 ADPCM AAC H 264 BP MP HP 1920x1080 ADPCM AAC HE 3gp 3GPP AAC MPEG4 SP ASP 1920x1080 6 30 8 MPEGI 352x288 24 25 30 30 iG VRO O2 AC3 MPEG LPCM VOB MPEG2 1920x1080 24 25 30 MPEGI 352x288 24 25 30 mpg PS MPEG2 1920x1080 24 25 30 ROS ESTEEM mpeg AAC H 264 1920x1080 6 30 Engish 5 7 Advanced Features MPEG2 1920x1080 24 25 30 Other Restrictions amp NOTE If there are problems with the contents of a codec the codec will not be supported If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above If the Index Table is in error the Seek Jump function is not supported You may experience file stutter
6. Getting Started Viewing the Remote Control amp This is a special remote control for the visually impaired persons and has Braille points on the Power Channel and Volume buttons Turns the TV on and off Displays and selects the available video sources Have direct access to channels Alternately select Teletext ON Double Mix or OFF Adjusts the volume Displays the main on screen menu Link to various application services Quickly select frequently used functions Selects the on screen menu items and changes the values seen on the menu Returns to the previous menu These buttons are for the Channel List SMART HUB menu etc Use these buttons in SMART HUB and Anynet modes p 46 63 Installing batteries Battery size AAA ON OFF Turns the remote control light on or off When on the buttons become illuminated for a moment when pressed Using the remote control with this button set to on will reduce the battery usage time Returns to the previous channel Cuts off the sound temporarily Changes channels Displays channel lists on the screen p 24 Displays the EPG Electronic Programme Guide p 23 Displays information on the TV screen Exits the on screen menu SOCIAL TV Connect to Social TV application SEARCH Support to recommendation search word and search function BA Sets the video which provided with 3D signal 29 E MA
7. Solutions and Explanations Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect PIP functionality is only available when you are using a HDMI PC or components source p 43 If you are using a CAM CARD CI Cl check that it is installed into the common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV Check and change the signal source To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture S This panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product i Storage and Maintenance D If you attached some stickers on the TV screen it remains some debris after removing the sticker Please clean it to watch TV Do not spray water or a cleaning agent directly onto the product Any liquid that goes into the product may cause a failure fire or electric shoc
8. During the device formatting do not disconnect the device while formatting is in progress If you format the device all files will be deleted Before formatting your device to the tv please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss e Recorded videos are DRM digital rights managements protected and cannot be played on a PC or other TVs Note that files saved on the TV cannot be used after the main board is changed e Ifthe 10M free memory space limit of the USB storage device is reached the current recording process will be closed We recommend using a USB HDD with at least 5 400 rom but a USB HDD of RAID type is not supported e The availability of both recording and the Timeshift function may differ depending on picture quality and the free space on the hard disk drive e Note that if you have paused the recording the TV will automatically resume playback e Ifthe 5 free memory space limit of the USB storage device is reached the current recording process will be closed e When recording is performed by both the PVR Personal Video Recorder function and a device that supports the HDMI CEC feature recording by the PVR function takes precedence e During a playback or the Timeshift the picture will be displayed according to the display settings of the TV e If you change the input source during recording the screen will go blank until t
9. There is no sound or the sound is too low at maximum volume The picture is good but there is no sound The speakers are making an inappropriate noise No Picture No Video The TV won t turn on The TV turns off automatically There is no picture Video RF Cable Antenna Connection The TV is not receiving all channels The picture is distorted macro block error small block dots pixelization Network Connection The wireless network connection failed Software Upgrade over the network fails Recording Timeshift The USB device is not recognized or a Device Format Checking Device or Device Performance Test fails Solutions and Explanations First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test p 44 If the audio is OK the sound problem may caused by the source or signal Please check the volume the of external device connected to your TV Set the Speaker Select option to TV Speaker in the sound menu p 35 If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV If you are using a DVI to HDMI cable a separate audio cable is required If your TV has a h
10. Enables or disables the media function When the media function is on Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC AllShare Settings SS e The displayed image may differ depending on the model Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function BW The Media function is available in all devices which support DLNA DMC E Allowed Denied Allows Blocks the the devices HM Delete Deletes the devices from the list This function only deletes the name of the device from the list If the deleted device is turned on or tries to connect to the TV it may appear on the list again Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played amp NOTE e f the media function executes for the first time the warning popup window appears Press the ENTERL button to select Allowed then you can use Media function on that device To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare Settings e Contents may not be played on your TV depending on their resoluti
11. Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 678 7 460 668 7 515 710 7 519 274 Open source licence notice In the case of using open source software Open Source licence are available on the product menu Open Source Licence Notice is written only English Engish 3 Specifications Operatin Temperature 50 F 104 F 10 C 40 C APAE Anena ane Humidity 10 80 non condensing Temperature 4 F 113 F 20 C 45 C considerations Storage Humidity 5 95 non condensing Tilt 1 1 20 1 Model Name Screen Size Diagoral Sound Outbu Dimensions Wat Weight NOTE e Design and specifications are subject to change without prior notice e For information about power supply and more about power consumption refer to the label attached to the product e Some models may not be available for purchase depending on the region e f there is no power cut off switch the power consumption is O only when the power cord is disconnected e DPM Display Power Management Function does not work if you used in conjunction with the HDMI IN 1 DVI port of this product Other Information A F R Accessories 11 Film Mode 33 Remote Control 13 Advanced Settings 32 Fine Tune 21 RGB Only Mode 32 Amplify 34 Flesh Tone 32 Anynet 63 S Audio Description 35 H l Asome 35 Safety Precautions 4 HDMI 63 Samsung
12. Selects the black level on the screen to adjust the screen depth S Available only in HDMI mode E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality Available in TV AV COMPONENT 480i 1080i and HDMI 480i 1080 E Motion Plus Off Clear Standard Smooth Custom Demo Removes drag from fast scenes with a lot of movement to provide a clearer picture The Info screen on your TV displays the resolution and frequency of the incoming signal 60Hz but not the frequency the TV is generating for the image it is displaying by using Motion Plus function amp If noise occurs on the screen please set up the Motion Plus to Off If Motion Plus is Custom you can set up the Blur Reduction Judder Reduction or Reset manually amp If Motion Plus is Demo you can compare the difference of on and off modes Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films Reset Reset the custom settings Reset Picture Yes No Resets your current picture mode to its default settings fi Setting up the TV with Your PC Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ i
13. Using the Auto Network Search function Manual Setup WPS PBC One Foot Connection Plug amp Access e The TV may not recognize the Samsung Wireless LAN adapter if you connect it to the TV with a USB hub or USB extension cable other than the cable supplied with the TV English 22 Basic Features Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions MENU ENTERLC Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu MENU button Displays the main on screen menu ood EXIT button Exits the on screen menu How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appear on the screen Picture Sound Channel Network System Support 1 MENU M 2 A Y Select an icon with the A or Y button a 3 ENTER Press ENTERC to access the sub menu 4 A Y Select the desired submenu with the A or V button Adjust the value of an item with the 5 aie lt or gt button The adjustment in the OSD may differ depending on the selected menu a 6 ENTER Press ENTERS to complete the configuration F EXIT g Press EXIT Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV
14. amp Battery CR2025 1EA User Manual A z e HDMI Cable e AV Component Adapter e Stereo Cable amp For best cable connection to this product be sure to use cables with a maximum thickness as below Maximum thickness 0 55 inches 14mm Engish 11 Getting Started The product colour and shape may vary depending on the model Power Indicator Remote control sensor amp OC Speakers I Menu Displays an on screen menu the OSD on screen display of your TV s features Source Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER CL button on the remote control Volume Adjusts the volume In the OSD use the and buttons as you would E use the lt q and gt buttons on the remote control Channel Changes the channels In the OSD use the AW and W buttons as you ad would use the A and W buttons on the remote control 3D Turns the 8D image on or off Power Turns the TV on or off Power Indicator Blinks and turns off when the power is on and lights up in standby mode Remote control sensor Aim the remote control towards this spot on the TV Speakers Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord Engish 12
15. programme information for each channel according to the broadcasting time e Scroll 4 gt to view information for a desired programme while watching the current channel e Scroll a w to view information for other channels If you want to move to the currently selected channel press the ENTER C button arte 5 46 Sun 2 May Karl der GroBe 2 3 45 6 20 DTV Air 1 5 Y Spiefilm Frankreich Italien 1994 Karl der GroBe war der Wegbereiter Information Europas Der abenteuerliche dreiteilige Fernsehfilm widmet sich dem Using the Channel Menu Press the SMART HUB button to select the menu you want to use Each screen will be displayed SART HUB Search Q Your Video dp RE Connetc to the Internet and enjoy a variety of contents through Smart Hub This feature may not be available in some countri ec SSS aa intries For some oi countries listed local language characters might not be display properly wey une ga F a oS OU aay Favourites Channel Guide Recorded TV Videos Photos a g ES ose o Music Schedule Man Source AllShare Login Sort by Edit Mode Settings e The displayed image may differ depending on the model Guide SMART HUB Guide gt ENTER C3 depending on the country The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the c
16. 3D Games for SyncMaster TriDef 3D contact DDD USA Inc www tridef com For further details about the product contact Samsung Electronics TriDef 3D and all related indicia are trademarks of DDD Group PLC 2010 All Rights Reserved Precautions when viewing 3D video amp NOTE e The 3D effect may be experienced differently depending on the viewer You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye e When viewing a 3D video under a fluorescent lamp or 3 wavelength lamp you may notice a small amount of screen flickering Interference may cause the 3D glasses to malfunction if there is any other 3D product or electromagnetic device a microwave or a device that uses 2 4 Ghz bandwidth frequency such as an Internet router turned on nearby Even if the 3D function works properly it is best to remove other electromagnetic devices or wireless communications devices nearby e Visually sensitive viewers may notice a slight screen flickering when viewing bright images in 50 Hz 3D video e As the TV turns on the left and right sides of 3D pictures may overlap more than usual It may take time until the picture quality is optimized e 3D Mode will automatically deactivate when the channel or input source is changed or when Smart Hub is accessed e The PIP function is not available when a 3D video is playing e The Picture icon under Smart Hub
17. 4 3 WSS Wide Screen Service size or the original size amp amp Not available in HDMI DVI Component or HDMI mode L Using the 3D function MENU I Picture gt 3D ENTER IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the TV s 3D function A WARNING e Some viewers may experience dizziness nausea or headache when viewing 3D video If this occurs stop viewing 3D TV immediately take off the 3D glasses and rest e Watching 3D video for an extended period of time may cause eye fatigue If eye fatigue occurs stop viewing 3D TV immediately take off the 3D glasses and rest e Children need to be checked frequently by adults when using the 3D function If your child shows any symptom such as eye fatigue headache dizziness or nausea have the child stop watching 3D TV immediately and rest e Do not use the 3D Active Glasses for other purposes such as general eyeglasses sunglasses protective goggles etc e Do not use the 3D function or 3D glasses while moving You may trip or fall and become injured 3D This feature allows you to view 3D content such as 3D broadcasts or movies You can view 3D content using SyncMaster dedicated Samsung 3D glasses amp You can purchase SyncMaster dedicated 3D glasses model name SSG M3750CR separately Contact the dealer you purchased the product from for details about purchasing the 3D gl
18. Basic Features E Sound Systems Etc MENU I Sound ENTERC 3D Audio Off Low Medium High 3D audio technology provides the immersive sound corresponding to the pop up effect of 3D video by audio depth control in perspective amp amp Available in only when watching 3D image Broadcast Audio Options digital channels only mM Audio Language Change the default value for audio languages The available language may differ depending on the broadcast E Audio Format When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function amp Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable E Audio Description not available in all locations This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster amp Audio Description Off On Turn the audio description function on or off amp Volume Adjust the audio description volume Additional Settings digital channels only mM DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desi
19. DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver VCR m HDMI IN 4 2 ARC 1 DVI DVI AUDIO IN Device Device AUDIO OUT DVI OUT HDMI OUT amp HDMI IN 1 DVI 2 ARC DVI AUDIO IN e Connecting the product to a digital device using an HDMI cable will improve the picture and sound quality e The HDMI cable does not require an additional audio cable as it supports digital video and audio signals A digital device that is not compatible with HDMI output can be connected using an HDMI DVI cable and an audio cable e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade e Be sure to use an HDMI cable with a thickness of 14 mm or less e Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur This TV supports the 3D and ARC Audio Return Channel functions Note that the ARC function is only available when a cable is connected to the HDMI IN 2 ARC port e The ARC function can be used to output digital sound via the HDMI IN 2 ARC port and is only available when the TV is conn
20. Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements If more than 2 PTP devices are connected you can only use one at atime If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction If the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV If a USB extension cable is used the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when media contents is run use the Empty the Recycle Bin function on the PC to permanently delete the file Engish 5D Advanced Features Screen Display M
21. If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using Media contents the registration is completed amp For more information on DivX VOD visit http vod divx com Network Remote Control Off On Turn on off or give permission to Samsung mobile phones devices You must have a Samsung Mobile phone device which supports Wireless Remote Control For more details refer to each device s manual E Picture In Picture PIP MENU II System gt PIP gt ENTER C PIP Eea You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode amp NOTE e For PIP sound refer to the Sound Select instructions If you turn the TV off while watching in PIP mode the PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While SMART HUB is in operation the PIP function cannot be used e PIP is not available in 3D mode e PIP settings Main picture Sub picture Component HDMI1 DVI TV HDMI2 E PIP Off On Activate or deactivate the PIP function E Channel Select the channel for the sub screen E Size _ EE mm Select a size for the sub picture E Position a 7 F_ _ Select a position for the sub picture amp amp
22. MagicAngle 28 Headphones 17 Self Diagnosis 44 B Home Theatre 63 Sharpness 28 Background Music 60 Signal Information 44 Balance L R 34 i Sleep Timer 40 Batteries 13 Slide Show 60 Black Tone ga iI aed gt SMART HUB 46 Brightness 28 Installation Space 2 Software Upgrade 44 Source 20 C L Speaker Select 35 Specifications 74 Cable Holder 68 ao is Standby mode 40 Change PIN aie Subtitle 42 Channel 25 Symbol 3 Channel List 24 M Channel Menu Ar Music 59 T Cleaning Related 7 Clock 40 N TOOLS 3 Colour Tone 33 Troubleshooting 69 Component 16 Navigate 23 TV Speaker 35 Connecting to an Antenna 14 Now amp Next guide 23 Connecting to an Audio Device 17 U Connecting to an AV Device 15 O Usage Related Connecting to a PC 18 Off Timer At cee a On Timer 41 Using the Channel Menu 23 D Optimal resolution 19 DIGITAL AUDIO OUT 63 y DivX VOD 43 P Dynamic 28 oe i Dynamic Contrast 32 NOOS i Videos ot Picture Options 33 Volume 12 13 35 PIP Picture in Picture 43 E Plug amp Play 14 Edit Name 20 Power Related 4 Energy Saving 41 EPG Electronic Programme Guide 23 Equalizer 34 External Speaker 35 Engish 9 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre T Web Site AUSTRALIA 1300 362 603 www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com SINGAPORE 1800 SAM
23. Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device 01 01 03 12 amp amp Ifthe sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Creating My Playlist 1 On the Music screen in the Smart Hub menu press the 4 P a w button to select Edit Mode and then press the ENTER C4 button 2 Press the a w button to select the tracks you want to add and press the ENTER C button The v mark appears to the left of the selected files amp To select all the files in the current page select Select All at the top 3 Press the q a V button to select Add to My Playlist amp amp Note that selecting My Playlist Initialize will return My Playlist to the default playlist 4 Press the ENTERC button The message Selected items added to My Playlist is displayed 5 The newly created or updated playlist will be in the main Music page Playing My Playlist Select the My Playlist folder and it will play automatically Press the or w button to select a different music file within the play list SS To delete a file from My Playlist select the recycle bin icon next to the file you want to delete by using the direction buttons Playing the selected music files 1 On the Music screen in the Smart Hub menu press the 4 P A Ww button to selec
24. Standing Mode Gamma is not available Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control amp NOTE In analogue TV AV modes of the PAL system the Tint G R function is not available e In HDMI1 DVI mode when a PC is connected only Backlight Contrast Brightness and Sharpness are available for adjustment e Settings can be adjusted and stored for each external device connected to the TV Screen Adjustment M Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide New Zealand Singapore only Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 D Adjusts the Position by using 4 w buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size QD Adjusts the Zoom or Position by using 4 w button 4 3 Sets the picture to basic 4 3 mode amp Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention Screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080 1080p or Component 1080i 1080p signals are input
25. Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed amp amp You can change Teletext pages by pressing the numeric buttons on the remote control QO aA Teletext on mix off ee O page up Displays the next Activates the Teletext mode for the Teletext page current channel Press the button cy Pen F 9 page down Displays the twice to overlap the Teletext mode a O previous Teletext page with the current broadcasting cr D index Displays the index ei it one more time to a contents page at any time while PAL ISIGIONL n r you are viewing Teletext store Stores the Teletext J reveal Displays the hidden pa text answers to quiz games for size Displays the teletext example To display the normal on the upper half of the screen in 2u screen press it again double size To move the text to cancel Shrinks the Teletext the lower half of the screen press f isplay t ith th t it again For normal display press aera WI e curren 9 it
26. This feature is not available in some locations e f you experience a problem using a application please contact the content provider e According to circumstances of the contents provider an application s updates or the application itself may be discontinued e Depending on your country s regulations some applications may have limited service or not be supported Account Login For an application with multiple accounts select Ly to access the Login different accounts l i Smart TV ID f Press Enter 1 v amp For a more enjoyable application experience register and log in to your account Password Press Enter amp For instructions on creating an account refer to How to create an L 44 Remember my Smart TV ID and password Smart TV ID 1 Press the Red button in the Smart Hub home page 2 Select 7 by pressing the w 4 P button The account list patente appears Q f you want to create an account select Create Account then the create account OSD window will appear 3 Select the desired Smart TV ID and the press the ENTER L button 4 After selecting Smart TV ID enter the Password using the remote control amp When login succeeds Smart TV ID will be displayed on the screen How to create a Smart TV ID Before creating a Smart TV ID you should download the application first on the Samsung Apps 1 Press the Red EN button The Login screen appears 2 Select Create Account
27. When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theatre QD Headphones You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled e Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately Engish 17 Connections Connection using an HDMI or HDMI DVI cable D Connecting through the HDMI cable may not be supported depending on the PC DVI AUDIO IN 1 DVI amp A PC should be connected via the HDMI IN 1 DVI port amp If a non standard video format is selected the TV may not operate normally amp The interlaced scan mode is not supported This product offers a game driver SyncMaster 3D Game Launcher TriDef 3D that allows you to play PC games with dynamic 3D images Install the SyncMaster 3D Game Launc
28. current position e p button Jump to 20 sec from current position e u PAUSE button Pause the scene while keeping Timeshift operation In pause Ln mode press the SEARCH lt lt gt gt button If you press the SEARCH lt lt gt gt button the playback speed is reduced to 41 1 8 4 1 4 4 1 2 1 8 gt 1 4 1 gt 1 2 e m STOP button If you are watching the past scene playback point will jump to the same scene with Live TV If you are watching the same scene with Live TV the Timeshift function will be stopped e In pause mode press the PAUSE Lit button Each time the PAUSE Lit button is pressed a new frame will be appear e To return to nomal speed playback press the PLAY gt button amp NOTE e The product does not play sound in Stop mode e Stop motion operates only in the forward direction To stop Timeshift 1 If Timeshift bar is not in Lit PAUSE or PAST mode press m STOP button 2 Select YES button and press ENTER L button to stop Timeshift 3 Ifthe Timshift bar is in Lit PAUSE or PAST mode Timeshift mode will be changed into Live TV when you press La STOP button first time To use the recording or Timeshift function the connected USB device must be available for recording Device format is recommended to use USB HDD D During the Device formatting do not disconnect the device while formatting is in progress If you format the device all files will be
29. deleted S Before formatting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Engish 54 Advanced Features E Timer Recording in Schedule Manager SMART HUB Schedule Manager ENTERL Allows you to make a reservation to record a programme scheduled for broadcast Set the current time first to use this function Using the Timer Recording function digital channels only 1 Press the ENTERC button to select Schedule Manager The Schedule Manager screen will be displayed 2 Press the ENTERC button to add manual booking A pop up screen will appear 3 Press the 4 or gt button to select the Timer Recording We recommend using a USB HDD with at least 5 400 rom but a USB HDD of RAID type is not supported amp AUSB storage device cannot record until it completes the Device Performance Test 4 Press the 4 a buttons to set the Antenna Channel Repeat Start Time or End Time To record a current broadcasting programme Allows you to record a programme currently being broadcasted Set the current time first to use this function 1 When you watch a broadcast programme press the Le REC button on the remote to record A pop up window will appear amp We recommend using a USB HDD with at least 5 400 rom but a USB HDD of RAID type is not supported amp amp AUSB storage device cannot record until it c
30. function the picture can be calibrated without a generator or filter If the OSD menu disappears or a menu other than the Picture menu is opened the calibration is saved and the Expert Pattern window disappears While the Expert Pattern is running sound is not outputted D Only enabled on DTV Component HDMI models E RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation Colour Space Auto Native Custom Adjust the range of colours available to create the image To adjust Colour Red Green Blue and Reset set Colour Space to Custom White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings 10p White Balance Off On Controls the white balance in 10 point interval by adjusting the red green and blue brightness amp Available when the Picture Mode is set to Movie and when the external input is set to all input amp Some external devices may not support this function Interval Select interval to adjust Red Adjust the red level Green Adjust the green level Blue Adjust the blue level Reset Resets the 10p White Balance to its default settings Flesh Tone Emphasize
31. input screen appears before the setup screen E Channel Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme Available only when the input Source is set to TV E Program Rating Lock depending on the country Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code If selected channel is locked the fa symbol will be displayed Allow All Unlock All TV ratings E Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them Change your personal ID number required to set up the TV Re enter the same 4 digits When the Confirm screen disappears your PIN has been memorised How to watch a restricted channel If the TV is tuned to a restricted channel the Program Rating Lock will block it The screen will go blank and the following message will appear This channel is blocked by Program Rating Lock Please enter the PIN to unblock Q f you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off MUTE 8 2 4 POWER on E Other Features MENU II System gt ENTER Language E Teletext Language Set a desired language for teletext QD English is the default in cases where the selected language is unavailable in the broadcast E Preference Primar
32. once again T MENU Typical Teletext page amp hold Holds the display at ay the current page in the case that m e there are several secondary pages that follow automaticially To undo ToN o e NFo 3 des 11 press it again Colour buttons red green yellow f blue If the FASTEXT system Yo is used by the broadcasting company the different topics on a Teletext page are colour coded e and can be selected by pressing P r a Part Contents the coloured buttons Press the UY LU A Selected page colour corresponding to the topic a7 number of your choice A new colour ae Gum lt B Broadcasting channel coded page is displayed Items J identity can be selected in the same way T To display the previous or next J ri C Current page number page press the corresponding or search indications coloured button D Date and time O mode Selects the Teletext aN e E Text mode LIST FLOF N F Status information If pressed during LIST mode FASTEXT information switches the mode to List save mode In List Save mode you can save a Teletext page into a list using th
33. or start a V movie from the scene of your choice NV NV i NV NV NV NV O yY EA Yucmmoedreyoanee TC O yY EE A oo O yY O yY as Le 11 Pause button on the remote can be used You can search the movie using 4 and buttons at intervals of 1 minute a You can play movie and music files repeatedly You can play the music sequentially or randomly You can adjust the picture size to your preference You can view a subtitle You can select a specific language if the subtitle file contains multiple languages You can change the Sound Mode V V You can change the Picture Mode Pow o V wv Go to previous next photo file S V Displays the Subtitle Setting You can set up a subtitle option V Pow fo You can start or stop a slide show Alternatively the gt or Lit button on V the remote can be used You can select the slide show speed during the slide show Alternatively the V lt lt or gt gt button on the remote can be used You can set various slide show effects S ae V You can start or stop a background music a V You can set and select background music when watching a photo file or V slide show You can zoom into images in full screen mode ee ee V You can rotate images C a ee S S Pressing the INFO button while a device name is selected will display information about the selected device name D Pressing the INFO button while a file is selected will display information about the selec
34. pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries Motion Lighting Off On Reduce power consumption by brightness control 3D is not supported English 3 2 Basic Features Picture Options MENU M Picture Picture Options ENTER L amp In HDMI1 DVI mode when a PC is connected only Colour Tone is available Picture Options Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Standard E Colour Tone Cool Standard Warm1 Warm2 amp Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic D Settings can be adjusted and stored for each external device connected to an input on the TV E Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength D Only available for analogue channels amp When bar is green you are receiving the best possible signal E MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality amp Not available in HDMI DVI mode when a PC is connected E HDMI Black Level Normal Low
35. ra Samsung Apps You can Di v4 So TV Screen Displays Bas download various for pay or the current channel lela the Internet and enjoy a variety of contents through Smart Hub free of charge application is feature may not be available in some countries For some of the countries listed local language characters might not be display properly services ae oot i Sr Installed Applications Favourites Recorded TV Videos Photos list Displays the installed Q S 50 S applications in the TV Music Schedule Man Source AllShare Login Sort by Edit Mode Settings i l Controls ner natn Displays oe wad Red Login Logout To log in to Smart Hub app leatione aiiaraqvenl sovienie e E Green Sort by To sort the applications by category de SPU emer pioeue E Yellow Edit Mode You can edit the applications such MO GHETONS as move making folder e PP Blue Settings Edit and configure applications and Smart Hub settings amp The colour buttons may work differently depending on the application Engish 46 Advanced Features amp NOTE e Configure the network setting before using Smart Hub For more information refer to Network Settings e Unsupported fonts within the provider s content will not display normally e Slow responses and or interruptions may occur depending on your network conditions e Depending on the region English may be the only language supported for application services e
36. recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 2 Using a LAN cable connect between the external modem and the PC onto which the AllShare PC Software programme will be installed e You can connect the TV to the PC directly without connecting it through a Sharer Router amp Functions that are not Supported when connecting to a PC through a network e The Background Music and Background Music Setting functions e Sorting files by preference in the Photos Music and Videos folders e The lt lt REW or gt gt FF button while a movie is playing DivX DRM Multi audio embedded captions are not supported AllShare PC Software should be permitted by the firewall programme on your PC GOD When you use media contents mode through a network connection depending on the functions of the provided server e The sorting method may vary e The Scene Search function may not be supported e The Resume which resumes playing of a video may not be supported The Resume function does not support multiple users It will have only memorised the point where the most recent user stopped playing e The 4 or gt button may not work depending on the content information You may experience file stuttering while playing a video in media contents
37. refer to the Network Connection instructions amp If the internet connection doesn t operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade Engish 44 Basic Features By Channel Upgrade the software using the broadcasting signal If the function is selected during the software transmission period software will be automatically searched and downloaded S The time required to download the software is determined by the signal status Alternative Software backup Displays the software version downloaded through By Online During the software upgrading When the Upgrade will discontinue from last step this function be activated Standby Mode Upgrade Off 1 hour later 2 hours later 00 00 02 00 12 00 14 00 A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the product This phenomenon may continue for more than 1 hour until the software upgrade is complete Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software Engish 445 Advanced Features Getting Started with Smart Hub Features Social TV Share your TV viewing experience with your friends via
38. supports the HDMI CEC and ARC features must be connected to the HDMI IN 2 ARC port To disable the ARC function set the Receiver to Off Even if the TV transmits the ARC signal continuously the receiver will be blocked from receiving the signal Engish 65 Advanced reatures i Troubleshooting for Anynet Problem Anynet does not work want to start Anynet want to exit Anynet The message Connecting to Anynet device appears on the screen The Anynet device does not play The connected device is not displayed The TV sound is not output through the receiver Possible Solution Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theatre can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet doesn t work in certain situations Searching channels operating Smart Hub or Plug amp Play initial setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on Check if the Anynet device is properly connected to the TV and check
39. the 4 and gt button e You can use lt lt REW and gt FF buttons during playback Device Management Manage external devices You can manage options such as device format checking device Device performance test and default device e Device format Format the device e Checking device Checks for errors on the device e Device Performance Test Test the recording performance of the device e Default Recording Device Select default recording device e Device Information Show the device information Device Type Device Name Used Space Available Space Recordable Time Total Space Progress bar Engish 56 Advanced Features I Videos Playing Video 1 Press the 4 P a w button to select the desired file in the 4 d omens file list 1 02 15 2 04 10 Ss 2 Press the ENTERC button or gt Play button e The selected file is displayed on the top with its playing time e If video time information is unknown play time and at progress bar are not displayed ee ai m e During playing the video you can search using the 4 and P button d e You can use lt lt REW and gt gt FF buttons during playback S In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats MPEG 4 time based text XML SubRip string based SubViewer sub string based Micro DVD string based e Supported Video Formats A Frame rate Bit rate
40. the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 Inthe pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 On the Support Tab click the Details button The Network connection values are displayed English 36 Basic Features How to set up manually To set up your TV s cable network connection manually follow these steps IP Settings IP Mode Manual IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 DNS Mode Manual DNS Server 0 0 0 0 1 Follow Steps 1 through 2 in the How to set up automatically procedure 2 Select the IP Settings on network test screen 3 Set IP Mode to Manual 4 Press the w button on your remote to go to the IP Address 5 Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another 6 When done select the OK 7 The network test screen appears and network setting is done E Wireless O Network Settings Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of lette
41. use a wireless network e Samsung Wireless LAN adapter and The USB extension Cable are sold separately and are offered by select retailers Ecommerce sites and Samsungparts com e To use a wireless network your TV must be connected to a wireless IP sharer either a router or a modem If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network e Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure e If you apply a security system other than the systems listed below it will not work with the TV amp If Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed for your wireless router Samsung TVs will not support a connection in compliance with new Wi Fi certification specifications e f your wireless router supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode e If your router modem or device is not certified it may not connect to the TV via the Samsung Wireless LAN adapter e Connection Methods You can setup the wireless network connection on five ways Auto Setup
42. will appear D Depending on the device this menu may not be available device_name Title Menu Shows the title menu of the connected device E g If a DVD recorder is connected the title menu of the DVD recorder will appear S Depending on the device this menu may not be available Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name E Setting Up Anynet MENU I System Anynet HDMI CEC gt ENTER C E Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On SS When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated E Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off amp If Auto Turn Off is set to Yes running external devices will turn off at the same time as the TV powers off However a device may not turn off if recording is in progress QD May not be enabled depending on the device E Switching between Anynet Devices 1 Press the TOOLS button to select Anynet HDMI CEC And then press the ENTER L button to select Device List S If you cannot find a device you want select Refresh to refresh the list 2 Select a device and press the ENTERL button You can switch to the selected device amp The Dev
43. 28 Adjust Energy Saving option in the TV menu go to MENU System Eco Solution Energy Saving p 41 Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture p 33 If the picture size is set to Screen Fit change it to 16 9 p 28 Change cable set top box resolution If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p Make sure the glasses are turned on The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses You may notice a small amount of screen flickering when watching 3D images under a fluorescent lamp 50Hz 6OHz a 3 wavelength lamp or a strobe light If this occures dim the light or turn it off entirely The ideal viewing distance is three times or more the height of the screen We also recommend sitting with viewer s eyes on a level with the screen Turn off 3D glasses while not using them If you leave 3D glasses on battery lifespan is shortened English 69 Other Information Issues Sound Quality
44. Change a show you have reserved to watch e Return Return to the previous screen Channel List You can view all the channel searched When you press the CH LIST button on the remote control Channel List screen will be displayed at once Channel List a TV 6 4 Antenna Programme View lt gt Ch Mode CC Watch Page e The displayed image may differ depending on the model D Using the operation buttons with the Channel List i Red Antenna Switches to Air or Cable E Yellow Programme View Channel View Displays the programme when digital channel is selected Returns to the channel view e lt p Ch Mode Channel Move to the type of channels you want to display on the Channel List screen All TV Radio Data Other Analogue Favourites 1 5 e C Watch Watches the channel you select e gt Page Move to next or previous page Engish 24 Basic Features How to use Timer Viewing in Channel List digital channels only When you set the Timer Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desired digital channel 2 Press the Programme View button 3 Press the a w buttons to select the desired programme then press the L Information button 4 Select Timer Viewing then press the ENTER L button when done Q tf you want to cancel Timer Viewing follow steps 1 through 3 Select Cancel Schedules
45. Edit Mode to Delete a Channel from the Channel List 1 Select the Edit Mode icon on the upper right of your screen and then press the ENTERC button 2 Press the q gt a vw buttons to select a channel and then press ENTER L A check appears to the left of the channel You can select more than one channel amp amp Pressing ENTERC again deselects the channel 3 Select Delete at the bottom of your screen and then press ENTER L A pop up appears asking if you want to delete the item 4 Select OK press ENTER L and then press ENTERC again The channel is deleted from the Channel List Select All Select all the channels or deselect all the selected channels in the Channel menu Edit Mode Edit Favourites Edit Channel Number Unlock Engish 2 Basic Features Using the TOOLS button with the Channel Upcoming Programme digital channels only View details on the programme being aired on a selected digital channel Edit Favourites Set channels you watch frequently as favourites 1 Select the Edit Favourites then press the ENTER C button 2 Press the ENTERC button to select Favourites 1 5 then press the OK button amp One favourite channel can be added in several of favourite channels among Favourites 1 5 Lock Unlock Lock a channel so that the channel cannot be selected and viewed amp This function is available only when the Channel Lock is set to On amp The P
46. IN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option Edit Channel Name analogue channels only Assign your own channel name Edit Channel Number Edit the number by pressing the number buttons desired Some area may not be able to support Edit Channel Name and Edit Channel Number function Delete Delete a channel to display the channels you want Channel Status Display Icons Icons Operations Al An analogue channel v A channel selected A channel set as a Favourites 1 5 tal A locked channel A reserved programme E Using the favourite Channels SMART HUB Favourites gt ENTER C3 Shows all favourite channels View all of your favourite channels If you want to change the favourite group among Favourites 1 5 move the cursor to group name And then press the ENTER LC button to change the group you want amp The se symbol wil be displayed and the channel will be set as a favourite How to assign a channel to favourite in Channel 1 Onthe Channel screen select a channel and press the TOOLS button amp If you want to add mulitple channels use the Edit Mode menu in the top right corner of the Channel screen 2 Add or delete a channel in the favourite groups you want among 1 2 3 4 and 5 amp One or more groups can be selected S The v mark appears to the left of the selected files 3 A
47. In Double HE ma mode Position cannot be selected E Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Engish 43 Basic Features Support Menu MENU OD gt Support gt ENTER Self Diagnosis W Self Diagnosis might take few seconds this is part of the normal operation of the TV Picture Test Yes No Use to check for picture problems Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual Sound Test Yes No Use the built in melody sound to check for sound problems Q if you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Yes If you can hear sound only from one speaker or not at all during the sound test select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If you can hear sound from the speakers select No There may be a problem with your external equip
48. NUAL Not Available P SIZE Selects the Picture Size p 28 AD SUBT Turns the audio description on and off not available in some locations p 35 Displays digital subtitles p 42 Engish 13 Connections Connecting to an Antenna When the TV is initially powered on basic settings proceed automatically S Preset Connecting the mains and antenna Cable DC 14V Power Input i a When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input Source is set to TV ANT OUT Plug amp Play Initial Setup S Before turning on the TV make sure the antenna cable is connected 1 Wired Wireless network Set up your network connection Press the ENTERC button to start connection 2 Setting up the Network Set up your network connection Press the ENTERC button to start If you do not Know your network set up information or want to set to it later select Skip You can set up the network connection later using the Network menu 3 Selecting the usage mode Press the lt or gt button then press the ENTER L button Select the Home Use mode Store Demo mode is for retail environments To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume OSD press and hold MENU for 5 sec e Store Demo is only for shop disp
49. Otherwise it may result in fire or ore electric shock e lf the product needs to be fixed contact a service centre To move the product turn the power off and unplug the power cord the antenna cable and any other wires connected to the product e Otherwise it may result in electric shock or fire due to the damaged power cord Engish J Getting Started If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service centre shock or fire If you drop the product or the case is damaged turn the power off and unplug the power cord Contact a service centre e Otherwise it may result in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is dangerous e Otherwise it may result in electric L e Otherwise it may result in electric shock or fire Avoid moving the product by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating
50. P address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer amp You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses amp tt is not supported when the network speed is under 10 Mbps Engish DL Connections Connecting to a Wireless Network To connect your TV to your network wireless you need a wireless router or modem and a Samsung Wireless LAN adapter WISOSABGN WISOSABGN2 WIS1OABGN sold separately which you connect to your TV s back or side panel USB port See the illustration below TV Rear Wireless IP Sharer The LAN Port on the Wall sa a i Samsung Wireless LAN Adapter Samsung s Wireless LAN adapter is sold separately and is offered by selected retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 11n When you play video over a IEEE 802 11b g connection the video may not play smoothly amp NOTE e You must use the Samsung Wireless LAN adapter WISOSABGN WISOSABGN2 WIS1OABGN to
51. SUNG 726 7864 www samsung com 2011 Samsung Electronics Co Ltd All rights reserved BN46 00078B 00
52. THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR FREE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF THE DEVICE OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be changed suspended removed terminated or interrupted or access may be disabled at any time without notice and Samsung makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control Without limiting the generality of this disclaimer Samsung expressly disclaims any responsibility or liability for any change interruption disabling removal of or Suspension of any content or service made available through this device Samsung may impose limits on the use of or access to certain services or content in any case and without notic
53. TV to anetwork that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically Network Settings Select a network connection type Wired amp Wireless general Connect to the network using Previous a LAN cable Please make sure that the LAN cable is connected Next WPS PBC One Foot Connection Cancel e The displayed image may differ depending on the model 1 Go to Network Settings screen To enter it follow the directions of Network Settings 2 Select the Wireless general 3 The network test screen appears and network setting is done Network Settings Wireless network and Internet connection settings completed MAC Address pa a amp IP Address 00 1 2 f 2b 56 4d 192 168 11 4 259125925910 192 168 11 1 192 168 11 1 Subnet Mask Previous Gareway DNS Server IP Setting Retry Internet is connected successfully If you have a problem with using Internet Service contact your Internet OK service provider S If it fails to set automatically check the connection of LAN port S if you cannot find network connection values or if you want to set connection manually set it to Manual Refer to following How to set up manually O Network Settings Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get
54. The Create Account screen will appear 3 Press the ENTERC button to enter anew Smart TV ID The Keypad screen will appear 4 Using the keypad screen enter a Smart TV ID amp A Smart TV ID must be created in sample sample com form Using the Keypad Pressing the TTX MIX button on the remote while you are using the Screen Keypad enables you to change the text fields to lower case capitalized case upper case numbers and icons Using the Green E button on the remote control to change the input mode T9 ABC You can change the language by using the TOOLS button You can use this Screen Keypad in a several Smart Hub applications Method 1 Here is how to input characters using keypad of ABC type 4 1 For example suppose that you want to input 105Chang 4 2 Press the TTX MIX button on the remote 3 times to change the input mode from lower case to numbers 4 3 Press the 1 0 and 5 button in numerical order 4 4 Press the TTX MIX button on the remote 4 times to change the input mode from numbers to upper case 4 5 Press the 2 button on the remote 3 times to input C 4 6 Press the TTX MIX button on the remote 3 times to change the input mode from upper case to lower case 4 7 Press buttons on the remote to input the rest of Chang When done press the ENTER C button Engish 4 J Advanced Features Method 2 Using the Keypad of T9 type 4 1 For example suppose that you want to input 105Chang 4 2 Pr
55. all functions can only use the setting menu except the setting menu are needed to connect to the internet All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE AND ACCURACY IS WITH YOU THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OF SATISFACTORY QUALITY FITNESS FOR A PARTICULAR PURPOSE OF ACCURACY OF QUIET ENJOYMENT AND NON INFRINGEMENT OF THIRD PARTY RIGHTS SAMSUNG DOES NOT GUARANTEE
56. asses SS The product may not be compatible with 3D glasses other than the model specified above S Power off the 3D glasses when not in use Otherwise the battery lifespan will decrease English 29 Basic Features e 3D Mode Select the 3D input format amp amp Put on the 3D glasses and select a 3D mode that offers the best 3D effect from the following 3D modes under 3D Mode Functions Turns the 3D function off Changes a 2D image to 3D Left Right Displays the left and right images overlapping each other to allo u to experience the Top amp Bottom aa a p Some file formats may not support A amp amp The po and A modes are only available when a PC is connected via the HDMI IN 1 DVI port or when the resolution of the content from a DTV broadcast a source device connected via the HDMI port or a USB storage device connected is 720p 1080i or 1080p e 3D Perspective 5 5 Adjust overall 3D perspective of on screen image e Depth 1 10 Adjust overall depth e L R Change L R Image R L Image Swap the left and right pictures e 3D 2D Off On Displays the image for the left eye only Q This function is deactivated when 3D Mode set to Ho Ba How to watch the 3D images Some 3D Mode may not be available depending on the format of the image source amp To watch in 3D wear 3D Active Glasses and press the power button on the glasses To select a 3D mode follow these st
57. autions marked with this sign may result in a personal injury or A CAUTION property damage D Do not perform T Must be followed This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol alerts you that important literature concerning operation and maintenance has been included with this product Power Related The following images are for your reference and may differ depending on models and countries A Warning Avoid using a damaged power cord or plug or a loose power outlet e Otherwise it may result in electric shock or fire Avoid plugging in or unplugging the lee power supply with wet hands e Otherwise it may result in electric 2 shock Make sure to connect the power cord to a grounded wall outlet for insulation class 1 equipment only e Otherwise it may result in electric shock or injury Avoid connecting multiple electric appliances to a single wall outlet e Otherwise it may result in fire due to overheating of the wall outlet Plug the power plug in firmly e Otherwise it may result in fire Avoid bending or twisting the power cord excessively and avoid placing h
58. channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored p 14 Verify the Antenna is positioned correctly Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue The Samsung Wireless USB dongle is required to use a wireless network Make sure the Network Connection is set to Wireless Make sure the TV is connected to a wireless IP sharer router Run Network Test in the Network menu to confirm the connection If you have the latest Software SW version the SW upgrade will not proceed See the manual for the USB device to check that the USB device supports recording If the USB device has a lock ensure it is off Check that the USB device can be formatted when connected to the PC Connect the USB to the TV and format it Formatting may fail intermittently lf a Device Performance Test or formatting failed it means that there is a problem with the USB hardware or the performance of the USB hardware is too low Engish JO Other Information Issues A message prompts me to format a USB device that has been working well The recording function does not work Timeshift Mode does not work A message indicates a performance test failure and the recording and Timeshift Mode functions do not work A scheduled recording has fa
59. device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model English 68 Other Information If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Solutions and Explanations PC Connection A Mode Not Supported message appears PC is always shown on the source list even if a PC is not connected The video is OK but there is no audio Picture Quality The TV image does not look as good as it did in the store The picture is distorted macro block error small block dots pixelization Colour is wrong or missing There is poor colour or brightness There is a dotted line on the edge of the screen The picture is black and white When changing channels the picture freezes or is distorted or delayed 3D The 3D Active Glasses are not working correctly The screen seems to flicker slightly when you watch 3D images The 3D images don t look quite right The batteries in the 3D glasses don t last Set your PC s output resolution and frequency so they match the resolutions supported by the TV p 19 This is normal PC is always shown on the source list regardless of whether a PC is connected If you are using a HDMI connection check the a
60. e 6 store button sub page Displays the available sub page Engish 67 Other Information Assembling the Cables Use the Cable Holder to hide the cables behind the stand TA750 TA950 Q Eo OS amp The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically atte fix the system when using it in a public place The appearance and locking method A a may differ from the illustration depending on the manufacturer Refer to the manual lt TV Rear gt Py 9 provided with the Kensington Lock for additional information on proper use of SW Please find a R icon on the rear of the TV A kensington slot is beside the R icon To lock the product follow these steps eee geet i 1 Wrap the Kensington lock cable around a large stationary object such as desk lt Optional gt or chair e The displayed image may differ 2 Slide the end of the cable with the lock attached through the looped end of the depending on the model Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock These are general instructions For exact instructions see the User manual supplied with the locking device The locking
61. e downwards at the location where it comes in the house so that rainwater does not flow in e f rainwater enters the product it may result in electric shock or fire Install the antenna far away from any high voltage cables e f the antenna touches or falls onto a high voltage cable it may result in electric shock or fire Ad Caution Do not let the product drop while moving it e This may result in a problem with the product or injury Do not place the product face down on the floor e This may damage the panel of the product When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used English 6 Getting Started l C
62. e or liability Samsung is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers Engish 50 Aavanced Features Enjoy photos music and or movie files saved on a USB S ART HUB a Mass Storage Class MSC device sain os 1 Press the SMART HUB button eA 5 2 Press the w or amp button to select desired menu ie E ec A a For some of the countries listed local language characters might not be display properl Videos Photos Music then press the ENTER L ii i pleat button pe OD H g TA D i gt Favourites Channel Recorded TV Videos Photos Q as oy re Music Schedule Man Source AllShare Login Sort by Edit Mode Settings e The displayed image may differ depending on the model Connecting a USB Device 1 Turn on your TV Ties 2 Connect a USB device containing recorded TV photo music and or movie files to the USB 1 USB 2 HDD port on the back or side panel of the TV aaa 3 When USB is connected to the TV popup window appears Then you can l select New device connected USB Drive Connecting to the PC through network You can play pictures music and videos saved on your PC through a network connection in the AllShare mode 1 For more information on how to configure your network refer to Network Connection e You are
63. eadphone jack make sure there is nothing plugged into it Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the System menu p 40 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connect to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the
64. eavy objects on the cord e Otherwise it may result in electric shock or fire due to a damaged power cord Engish 4 S E Getting Started Keep the power cord and the product away from a heater Otherwise it may result in electric shock or fire y N Caution Avoid unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Avoid placing burning candles mosquitorepellentor cigarettes on the product e Otherwise it may result in fire Avoid installing the product in a badly ventilated location such as inside a bookshelf or closet e Otherwise it may result in fire due to internal over heating Avoid installing the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e f you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire If the pins of the power plug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Make sure to use only the power cord supplied by
65. ected to an audio receiver that is compatible with the ARC function e Default Edit Name of HDMI IN 1 DVI terminal of this model is DVI PC for PC connection When connecting to a AV device such as DVD or Blu ray it is required to change the Edit Name to the name of the connected device p 20 Engish 15 Connections Using a Component up to 1080p or an Audio Video 480i only Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver VCR Pre IN VIDEO ised Y Ps Pr COMPONENT IN Device Device VCR DVD AUDIO OUT COMPONENT OUT AUDIO OUT VIDEO OUT S When connecting to AV IN the colour of the AV IN VIDEO jack green will not match the video cable yellow amp To obtain the best picture quality the Component connection is recommended over the A V connection Engish L6 Connections Connecting to an Audio Device Using an Optical Digital or a Headphone Connection Available devices digital audio system amplifier DVD home theatre PC DIGITAL AUDIO OUT OPTICAL Digital audio system OPTICAL DIGITAL AUDIO OUT OPTICAL e When a Digital Audio System is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system e 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e
66. eless Router is optimized HD AV streaming for Samsung DTV This is our product s distinctive function Samsung wireless Router can be connected with many devices such as laptop mobile phone BD player etc In case of connecting Samsung TV to Samsung wireless Router while other devices are connected Samsung wireless Router will give Samsung TV a priority connection than other devices This function ensures the best streaming contents and throughput speed e Make your TV faster by giving priority bandwidth to your TV on off optional e By giving priority to Samsung TVs enjoy HD content without buffering e Connection speed may vary based on the network environment E Ad Hoc Network Setup You can connect to a mobile device supporting Ad hoc without an wireless router through the Samsung Wireless LAN adapter When connected to a mobile device you can use files on the device or connect to the Internet using the AllShare or Multimedia function How to set up using WPS PBC 1 Go to Network Settings screen MENU J Network Network Settings ENTERC 4 2 Select Wireless General and press ENTERL4 then press ENTERL again 3 Select Ad hoc The message Ad hoc service supports a direct connection with Wi Fi compatible devices like a cell phone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed 4 Select OK and press ENTERL T
67. eps 1 MENU button a w button Picture ENTERC 2 4 WV button 3D ENTER CC 3 4 WW button 3D Mode ENTERL 4 lt gt button Select a mode from 3D Mode 3D Perspective Depth L R Change 3D 2D ii L R Image Standard HDMl compatible formats amp The 3D formats listed below are recommended by the HDMI association and must be supported by 3D TVs Source signal format Standard HDMI 1 4 3D 1920x1080p 24Hz 1920x2205p 24Hz 1280x7200 60Hz 1820x1470 60Hz 1280x7200 50Hz 1280x1470p 50Hz WwW For the Standard HDMI 3D format with 24Hz the TV is optimized as follows e To optimize the resolution of a video Select Off Clear or Standard in Motion Plus mode e To view a natural video without shaking Select Smooth or configure Custom in Motion Plus mode Resolution compatible with PC input connected via the HDMI IN 1 DVI port PC input is optimized for video in 1920 x 1080 resolution Videos with a resolution other than 1920 x 1080 will not be viewable in 3D or full screen mode English 30 Basic Features Playing a 3D Game on a PC First install the SyncMaster 3D Game Launcher TriDef 3D software amp SyncMaster 3D Game Launcher TriDef 3D is a game driver that allows you to play PC games in 3D 1 Set your monitor as the default monitor for the PC 2 Install the SyncMaster 3D Game Launcher TriDef 3D software provided on a CD Follow the instructio
68. er password e Properties More Display information about Smart Hub Terms of Service Agreement Display the Terms of Service Agreement B Using the Smart Hub service E Samsung Apps Samsung Apps is a store for downloading applications to be used on Samsung TV AV equipment Users can enjoy a variety of contents such as videos music photos games useful information etc using the downloaded applications Additional applications will be available in the future D Using the colour buttons with the Samsung Apps Red Login To log in to the internet service e E Green List View Thumbnail View To change the view mode e D Blue Sort by To sort the applications by Recommended Most downloaded Most recent or Name e 5S Return Moves to previous menu Using the Samsung Apps by category The following categories are available e What s New Displays newly registered applications e Video Displays various video media such as movies TV shows and short length videos e Game Displays various games such as sudoku and chess e Sports Displays various sports media such as match information images and short length video e Lifestyle Includes various lifestyle media services such as music personal photo management tools and social networking such as Facebook and Twitter e Information Includes various information services such as news stocks and weather e Other Includes other miscellaneous services e My Account D
69. ess the TTX MIX button on the remote 3 times to change the input mode from lower case to numbers 4 3 Press the 1 0 and 5 button in numerical order 4 4 Press the TTX MIX button on the remote 3 times to change the input mode from numbers to capitalized case 4 5 Press numbers in sequence 2 4 2 6 4 A window will appear displaying a list of words that can be entered using the selected numbers Select chang from the list BQ If Chang cannot be found in the list select to creat your own dictionary Add your own word to your dictionary 5 Using the remote control enter the Password e Password must be 6 12 words e You can delete the entered character using the PRE CH button e Using the lt lt REW or gt gt FF button you can select icon you want to enter in icon keypad screen 6 Account created You can use the services provided by all users of your Samsung TV with a single login by linking the users account to the TV ID If you want to register a service site ID select Register Service Site list will appear on the screen WB it you want to register service later select Register SamsungApps What s New Late r What s New Welecome to Samsung Apps More apps are in store for you enjoy 7 Select Register of the Service Site you want then press the Video os YouTube ENTERC button Game TV store Test User002 Sports 8 Using number buttons enter your application site ID and password When done se
70. f the corresponding Anynet device using an HDMI cable amp NOTE e Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre e When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV e You can connect only one Home Theatre e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions e Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English 63 Advanced Features Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list device_name MENU Shows the connected device menus E g Ifa DVD recorder is connected the disc menu of the DVD recorder will appear device_name TOOLS Shows the tools menu of the connected device E g Ifa DVD recorder is connected the play menu of the DVD recorder
71. fter you have changed the settings the channel list for each group can be viewed in favourite channels English 26 Basic Features E Retuning Channels MENU I Channel gt ENTER C Antenna Air Cable depending on the country Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV Country You can change the country The PIN input screen appears Enter your 4 digit PIN number Auto Tuning D Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Channel Lock function the PIN input window appears E Digital amp Analogue Digital Analogue Select the channel source to memorise Manual Tuning Scans for a channel manually and stores in the TV amp If a channel is locked using the Channel Lock function the PIN input window appears E Digital Channel Tuning Scans for a digital channel 1 Press the amp w q gt button to select New 2 Set the Channel Frequency and Bandwidth amp amp Bandwidth is not supported in Austraila 3 Press the w button to select Search When scanning has finnished a channel is updated in the channel list E Analogue Channel Tuning Scans for a analogue channel 1 Press the w q gt button to select New 2 Set the Programme Colour System Sound System Channel and Search 3 Press t
72. hannel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status S In New Zealand if Digital Text is set to Enable the EPG Electronic Programme Guide will work English 23 Basic Features Using Channel View Fri 1 Jan 2 10 am DTV Air 05 1 Globo HD TELA QUENTE HD 10 05 pm 12 10 pm k 10 DESVENTURAS EM SERIE HD Channel View All Channels Today 10 00pm American Chopper 10 30pm 11 00pm 11 30pm 04 14 Discovery Tine Team 05 1 DiscoveryH amp L 05 2 five 05 3 price drop tv 054 QVC 05 5 R4DTT Programmes resume at 06 00 Home and No Information Fiv Dark Angel No Information QVC Selection No Information Sche Mgr 24 Hours 24 Hours Ch Mode i Information Page C Watch e The displayed image may differ depending on the model e FX Red Sche Mgr Displays the Schedule Manager e E Green 24 Hours Viewing the list of programmes to be broadcasted before 24 hours e Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours e Pp Blue Ch Mode Select the type of channels you want to display on the Channel View window e Information Displays details of the selected programme e gt Page Move to next or previous page e 4 Watch Schedule When selecting the current programme you can watch the selected programme When se
73. he Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code Check the supported resolution of the TV and adjust the external device s output resolution accordingly p 19 This smell is normal and will dissipate over time This function is only available with digital channels from an Antenna RF Coax connection p 44 Remove the base stand from the TV and reassemble it Make sure the TV is placed on a flat surface If you can not remove the screws from the TV use a magnetized screw driver The Channel menu is only available when the TV source is selected If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU gt System Plug amp Play Initial setup ENTERC p 14 Engish J L Other Information Issues You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV The PIP menu is not available The message Scramble signal or Weak Signal No Signal appears You turned the TV off 45 minutes ago and it turned on again There are recurrent picture sound issues A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture
74. he TV searches for the mobile device 5 When the TV finishes searching for mobile devices input the generated Network Name SSID and Security Key into the device you want to connect amp If network does not operate normally check the Network Name SSID and Security key again An incorrect Security key may cause a malfunction S If a device is connected once it is displayed in the Network Setting list When you connect to it again you can find it in the List English 39 Basic Features If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect t
75. he change is completed e Ifthe USB device has failed the Device Performance Test the USB device must go through the Device Format and Device Performance Test again before you record with the Guide or Channel e The Timeshift functions can only be used with a USB storage device that completed the Device Performance Test e f you attempt the recording or Timeshift function with a device that did not have the Device Performance Test the function will not start e If you press Le REC on the remote control while the Channel screen is being displayed or record with Timer Recording the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command e f a USB device dedicated to recording is connected existing Timeshift or recording files that were saved abnormally will automatically be deleted e If you switch to external input mode during recording the recording will continue but the Le REC button will be disabled e If any function that turns off the TV Sleep Timer Off timer etc is set for a time that conflicts with recording the TV will be turned off once the recording is complete Playing Recorded TV Programme 1 Press the gt a button to select the desired file in the file list 2 Press the ENTERC button or gt Play button e The selected file is displayed on the top with its playing time e During playing the recorded TV programme you can search using
76. he w button to select Store When scanning has finished a channel is updated in the channel list amp Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel Transfer Channel List depending on the country The PIN input screen appears Enter your 4 digit PIN number Imports or exports the channel map You should connect a USB storage to use this function E Import from USB Import channel list from USB E Export to USB Export channel list to USB this function is available when USB is connected Edit Channel Number Disable Enable New Zealand only Edit the number by pressing the number buttons desired Fine Tune analogue channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is Clear D Settings are applied to the channel you re currently watching amp Fine tuned channels that have been saved are marked with an asterisk on the right hand s
77. her TriDef 3D software provided on a CD e After installing the software you can enjoy the 3D effect by using the 3D function on this product e For details about how to use SyncMaster 3D Game Launcher TriDef 3D refer to the Online Help for the software SERVICE SERVICE Connector for service only Engish 18 Connections Compatible PC resolutions when the PC is connected to the HDMI IN 1 DVI port If a signal that belongs to one of the following standard signal modes is transmitted from the PC the TV screen will automatically be adjusted If a signal outside of the standard signal modes is transmitted from the PC the TV screen may go blank and only the power indicator may turn on To resolve this issue adjust the resolution according to the following table referring to the user guide for the graphics card Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity S The above display settings table observes the IBM VESA requirements and has been prepared based on an analogue input source S The optimum display resolution is 1920x1080 60Hz The optimum Timing mode is a vertical resolution of 60 Hz Engish 19 Connections Source SOURCE gt ENTER Use to select TV or an external input sources such as a DVD Blu ray player cable box STB satellite receiver E TV HDMI1 DVI HDMI2 AV K Component USB AllShare SOURCE E In the Source connected inputs will be high
78. ice List menu will only appear when you set Anynet HDMI CEC to On in the System menu e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List Engish 64 Advanced reatures l Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit S If your receiver supports audio only it may not appear in the device list amp The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver Using the ARC function You can listen to sound through a receiver connected using an HDMI cable without the need for a separate optical cable 1 Select Receiver and set to On 2 Press the EXIT button to exit S To use the ARC function a receiver which
79. ide of the channel number in the channel banner S To reset the fine tuning select Reset English 27 Basic Features PictureMenu E Changing the Preset Picture Mode MENU 0 Picture Picture Mode ENTERC Picture Mode A Select your preferred picture type amp In HDMI1 DVI mode when a PC is connected Picture Mode can be set to Standard or Entertain only Dynamic Suitable for a bright room Standard Suitable for a normal environment Natural Suitable for reducing eye strain Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games S Available in HDMI1 DVI mode when a PC is connected only i Adjusting Picture Settings MENU M Picture ENTER Ce Samsung MagicAngle This feature allows you to see optimal screen quality according to your viewing position When viewing the screen at an angle from below above or the side of the product by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front E Off Select when viewing from the front position Lean back mode Select when viewing from a slightly lower position Standing Mode Select when viewing from the upper position M Mode 1 10 Determines the amount of adjustment Numbers closer to 10 are best for lower viewing positions amp amp When Samsung MagicAngle is set to Lean back mode or
80. if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press NPW and PRE CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynet setting or switching to view mode is complete You cannot use the play function when Plug amp Play Initial setup is in progress Check whether or not the device supports Anynet functions Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Search Anynet devices again You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected please repeat the device scan Connect the optical cable between TV and the receiver The ARC function enables digital output of sound using the HDMI IN 2 ARC port and can only be operated when the TV is connected to an audio receiver that supports the ARC function English 66 Other Information Analogue Channel
81. iled Several recording devices are connected but the TV stopped recording Others The picture won t display in full screen The remote control does not work The cable set top box remote control doesn t turn the TV on or off or adjust the volume A Mode Not Supported message appears There is a plastic smell from the TV The TV Signal Information is unavailable in the Self Diagnostic Test menu The TV is tilted to the side There are difficulties assembling the stand base The channel menu is greyed out unavailable Your settings are lost after 30 minutes or every time the TV is turned off Solutions and Explanations If the USB device has a lock ensure it is off Recover the USB device using the recovery function in Checking Device Check that a USB device is connected Check that the channel is a recordable digital channel If the signal is weak or does not exist the recording function will automatically be closed The TV will not record if the USB device has no free memory space Check that this is not the case Check that a USB device is connected Radio channels and analogue broadcasts are not supported Data broadcast channels are not supported If the signal is weak or does not exist the Timeshift Mode function will automatically be closed Timeshift Mode cannot be performed if the USB device has no free memory space Check that this is not the case These problems may occur if you use a
82. imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register SyncMaster Pam UN Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal tempera
83. ing while playing a video through a network connection Video Decoder Audio Decoder e Supports up to H 264 Level 4 1 e Supports up to WMA 7 8 9 STD e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not e WMAQ9PRO does not support 2 channel excess multi channel supported or lossless audio e XVID MPEG4 SP ASP e WMA sampling rate 22050Hz mono is not supported Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max e GMC 2 over is not supported E Playing movie file continuously Resume Play If you exit the playing Videos function it can be played later from the point where it was stopped amp The Resume function does not support multiple users It will have only memorised the point where the most recent user stopped playing Select the movie file you want to play continuously by pressing the lt or P button to select it from the file list section Press the gt Play ENTERC button Q A triangle icon will appear on the progress bar when the playback starts Press the TOOLS button and then select Resume The Movie will begin to play from where it was stopped 1 2 Engish 58 Advanced Features i Music Playing Music 1 Press the 4 gt a V button to select the desired music file in the file list avis 2 Press the ENTERC button or gt Play button m Mer i During playing the music you can search using the a4 E A FF and gt gt REW button i an 1 2MB S
84. install anew wireless router you must perform the One Foot Connection procedure again beginning from Step 1 E Plug amp Access Plug amp Access function make you easy to connect samsung TV and samsung wireless router by using USB memory stick If your wireless router does not support Plug amp Access you must connect using one of the other methods amp You can check for equipment that supports Plug amp Access on www samsung com How to set up using Plug amp Access function Turn on the power of wireless router and TV 1 Insert USB memory stick into our Samsung wireless router and checking wireless router s LED status Blinking gt On 2 Then take USB memory out and insert it into Samsung TV 3 Wait until the connection is automatically established Q if Plug amp Access does not connect your TV to your wireless router a pop up window appears on the screen notifying you of the failure If you want to try using Plug amp Access again reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1 You can also choose one of the other connection setup methods 4 The network connection screen appears and network setting is done 5 Place the wireless router in a desired location S If the wireless router settings change or you install anew wireless router you must perform the Plug amp Access procedure again beginning from Step i Priority QOS Samsung wir
85. isplays the application list and your cyber cash balance S Starting in the middle of 2010 US and Korea only you can purchase cyber cash for buying applications through tv samsung com e Help If you have questions about Smart Hub check this section first Legal Statement Due to the various capabilities of products featuring the Samsung Smart Hub Content Service as well as limitations in the available content certain features applications and services may not be available on all devices or in all territories Some features on Smart Hub may also require additional peripheral devices or membership fees that are sold separately Please visit htto Awww samsung com for more information on specific device information and content availability The services and availability of content through Smart Hub are subject to change from time to time without prior notice Engish 49 Advanced reatures l Troubleshooting for SMART HUB Problem Possible Solution Some application contents The Application content language may be different from the application user only appear in English How interface language can change the language The ability to change the language depends on the service provider Some application services do Check with the service provider not work Refer to the help website for application service provider information When a network error occurs If network connection doesn t work your service might be limited as
86. k Clean the product with a soft cloth dapped in a small amount of water Engish 72 Other Information l Licence S S TheaterSound HD SRS and symbol are trademarks of SRS Labs Inc TheaterSound HD TheaterSound HD technology is incorporated under license form SRS Lab Inc x DOLBY Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE Manufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 S dts 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are 2 0 Digital Out registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content DivX DivX Certified and associated logos are trademarks of DivX Inc and are used under license ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu
87. k Settings Enter security key Previous Next Cancel Delete amp When you enter the Security key Security or PIN use A V lt gt buttons on your remote to select number characters amp You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem The network connection screen appears and network setting is done S If it fails to set Security key Security or PIN select Reset or IP Settings S If you want to set connection manually select the IP Settings Refer to following How to set up manually Engish 37 Basic Features O Network Settings Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 Inthe pop up menu that appears click Status On the dialog that appears click the Support tab 4 Onthe Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your TV s cable network connection manually follow these steps IP Settings L VETTEN IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 DNS Mode Manual DNS Server 0 0 0 0 1 Follow Steps 1 through 2 in
88. lay If you select it several functions are not able to use Please select Home Use when you watch at home 4 Select Country Press the A or W button then press the ENTERC button Select the appropriate country 5 Setting the Clock Mode Set the Clock Mode automatically or manually e Auto Allows you to select a time zone amp Press the A or Y button to highlight the time zone for your local area Press the ENTERC button Australia only e Manual Allows you to manually set the current date and time 6 Selecting search options for auto Select the channel source to memorise among Digital amp Analogue Digital tuning Analogue amp Press the ENTER C button at any time to interrupt the memorisation process 1 Enjoy your TV If you want to watch a broadcast programme select Close If you want to enjoy the Smart Hub select the Smart Hub If You Want to Reset This Feature Select System Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is O 0 0 0 If you want to change the PIN number use the Change PIN function You should do Plug amp Play MENU System again at home although you did in shop S If you forget the PIN code press the remote control buttons in the following sequence in Standby mode which resets the PIN to 0 0 0 0 POWER off MUTE 8 gt 2 gt 4 POWER on Engish 14 Connections Connection using an HDMI or HDMI DVI cable Available devices
89. leaning Related A Warning Before cleaning the product unplug the power cord e Otherwise it may result in electric shock or fire A Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the product or the panel coming off If you can t get the product clean with just the supplied cloth use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the pee wy When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product When cleaning the product disconnect the power cord and clean the product with the supplied cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito repellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use the supplied cleansing cloth product Usage Related A Warning 9 S Since a high voltage runs through the product never disassemble repair or E modify the product yourself e
90. lect OK Lifestyle Information 9 Registered successfully If you add another service site select Other Yes then press the ENTERL button go to step 7 WJ My Account 10 When completed select OK Then press the ENTER Le D Help button Login List View D Return Setting up Smart Hub E Settings Configure Smart Hub settings from this screen Highlight Settings using the and w buttons and press the ENTERL a asegun Management ay e Account Management Service Manager Register Service Account Register login information for service sites Reset Change Password Change account password Properties Remove from TV Account List Delete an account from the list of accounts Cl Deactivate Account Withdraw membership from Smart Hub e Service Manager Ticker Autorun You can set Ticker Autorun to come on when powering on the TV amp Q The Ticker application provides useful News Weather and Stock Market information The Ticker application on Smart Hub must be downloaded to use this feature QB Depending on your country Ticker application may have a different service or not be supported Engish 48 Advanced Features Channel Bound Service Off On Some channels support applications as an Internet data service allowing you to access the Internet service while watching TV D Only available if supported by the broadcaster e Reset Resets Smart Hub settings to factory default settings If you want reset Smart Hub Ent
91. lecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTERC button again and select Cancel Schedules Schedule Manager SMART HUB Schedule Manager ENTERL You can view modify or delete a channel you have reserved to watch Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 On the Smart Hub screen press the ENTER L button to select Schedule Manager The Schedule Manager screen will be displayed 2 Press the ENTERC button to add programme to schedule manually A pop up screen will appear Press the 4 or gt button to select Timer Viewing 3 Press the q gt a w buttons to set the Antenna Channel Repeat Date or Start Time e Antenna Select the desired antenna source e Channel Select the desired channel e Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want amp The v mark indicates the date you ve selected e Date you can set desired date amp amp Itis available when you select Once in Repeat e Start Time You can set start time you want D Only memorised channels can be reserved amp amp On the Information screen you can change or cancel a reserved information e Cancel Schedules Cancel a show you have reserved to watch e Edit
92. lighted Edit Name fa SOURCE TOOLS Edit Name In the Source press the TOOLS button and then you can set an external input sources name you want mM VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier When connecting a PC to the HDMI IN 1 DVI port with HDMI cable you should set the TV to PC mode under Edit Name amp When connecting a PC to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI PC mode under Edit Name amp S When connecting an AV devices to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI Devices mode under Edit Name Edit Favourites M SOURCE TOOLS Edit Favourites In the Source press the TOOLS button to select Edit Favourites You can set an external input source to Favourites Information fs SOURCE TOOLS Information You can see detailed information about the selected external device Refresh f SOURCE TOOLS Refresh In the Source If the external devices are not displayed press the TOOLS button to select Refresh Search for connected devices English 20 Connections Network Connection Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways e You can attach your TV to yo
93. ll resulting in damage to the product or injury Keep power adaptor away from any other heat source e Otherwise it may result in fire Always keep power adaptor in well ventilated area Watching the product from too close a distance continuously may damage your eyesight English Getting Started Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product Take care when adjusting the angle of the product or the height of the stand e f your hand or finger is caught you may be injured e lf the product is tilted excessively the product may fall and this may result in injury When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery
94. low performance USB device that does not support recording We recommend using a USB HDD with at least 5 400 rom but a USB HDD of RAID type is not supported A scheduled recording is disabled for certain operations formatting performance test error checking deleting that access the file system of a USB device If there is no USB device connected the TV will not record even if the scheduled time is reached The TV will not record if the USB device has no free memory space Check that this is not the case If you record a channel locked with Program Rating Lock the PIN input window will appear when you try to play back the recording If multiple recording devices are connected and the device set as Default Recording Device has no free memory space the recording function will be closed Attempt recording again The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away Programme t
95. ment Please check your connections If the problem persists refer to the external device s user manual Signal Information digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength Troubleshooting If the TV seems to have a problem refer to this description amp amp If none of these troubleshooting tips apply contact the Samsung customer service centre Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from www samsung com to a USB memory device Software Upgrade By Online By Channel Alternative Software Standby Mode Upgrade 2hours later Installing the Latest Version E By USB Insert a USB TV Rear drive containing the firmware upgrade file downloaded from i www samsung com USB Drive Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade E By Online Upgrade the software using the Internet Q First configure your network For detailed procedures on using the Network Setup
96. n which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e f avertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box English 33 Basic Features Maintaining the Correct Posture when Using this Product a cH AN Maintain the correct posture when using this product e Straighten your back e Keep a distance of 45 50 cm 15 19 inches from your eyes to the screen Look down at the screen and face the screen forwards e Adjust the angle of the product so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Keep your elbow at a right angle e Place your heels flat on the ground while keeping your Knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart E Changing the Preset Sound Mode MENU M Sound Sound Mode
97. ns displayed on the screen You can also download the programme from www tridef com syncmaster and install it 3 Select Start gt All Programs gt TriDef 3D and run SyncMaster 3D Game Launcher TriDef 3D 4 Press the Search button Compatible games will be added to SyncMaster 3D Game Launcher TriDef 3D You can also add gamesusing the following methods Drag the shortcut icon or execution file of a game on the desktop into the SyncMaster 3D Game Launcher TriDef 3D window Goto File and select Add Games 5 Activate the 3D function on the product and enjoy the game wearing the 3D Active Glasses 6 Play the game wearing 3D glasses amp amp Refer to the user guide for the 3D glasses for details about how to use 3D glasses amp NOTE e For details about how to use TriDef 3D Games for SyncMaster see Online Help provided in the TriDef 3D Games for SyncMaster programme e Refer to Online Help for PC system requirements and details about how to use SyncMaster 3D Game Launcher TriDef 3D e A game whose system requirements exceed the PC cannot be started e The minimum PC system requirements may vary depending on the 3D game e For details refer to the home page or user guide for the 3D game you want to play e SyncMaster 3D Game Launcher TriDef 3D does not support PCs that are based on Macintosh or Linux operating systems e Further Information For further details about TriDef
98. o the Internet even after you have followed the procedures suggested by your Internet service provider please contact a Samsung Electronics dealer or customer service centre E Setting the Time MENU I System Time gt ENTER C Time M Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button Q f you disconnect the power cord you have to set the clock again Clock Mode Auto Manual e Auto Set the current time automatically using the time from a digital channel amp amp The antenna must be connected in order to set the time automatically e Manual Set the current time manually Bw Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Date and Time S Available only when Clock Mode is set to Manual amp amp You can set the Date and Time directly by pressing the number buttons on the remote control Time Zone Australia only Set the time zone to GMT This function is only available when the Clock Mode is set to Auto Using the Sleep Timer E Sleep Timer JA Automatically shuts off the TV after a preset period of time 80 60 90 120 150 and 180 minutes amp To cancel Sleep Timer select Off Engish 40 Basic Features Setting the On Off Timer e It is recommended that you use a USB memory E On Time
99. ompletes the Device Performance Test 2 Select Length to set up the recording time and then select OK Using the Timeshift function If you missed a live broadcast you can see from the recorded broadcast using this feature 1 When you watch a broadcast programme press the gt Play button on the remote to start the Timeshift function 2 Ifyou want to stop the Timeshift function press the La Stop button on the remote NOTE e The Timeshift mode operates for a maximum of 90 minutes e After the Timeshift mode function has run for the maximum time the time information will be fixed to 00 00 00 e The Timeshift function is not supported for analogue channels e The Timeshift functions are disabled for channels locked with Channel Lock Connect a USB device before using the Timeshift and Recorded TV functions A Recorded videos are DRM digital rights management protected and cannot be played on a PC or other TVs Note that files saved on the TV cannot be used after the main board is changed Connecting a USB device i Do not use a USB memory stick We do not support a USB We recommend using a USB HDD with at least 5 400 rom memory stick but a USB HDD of RAID type is not supported Engish 55 Advanced Features NOTE e To use the Timeshift mode or the Recorded TV function a connected USB device must be execute the Device Format function to proper form for recording
100. on and format The ENTERC and 4 gt buttons may not work depending on the type of media content e Using the mobile device you can control the media playing For details refer to each mobile s user s guide English 62 Advanced Features Anynet What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it e You can only control Anynet devices using the TV remote control not the buttons on the TV e The TV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products e For the method of connecting external devices refer to the supported user manual To connect to Home Theatre m HDMI IN 5 2 ARC 1 DVI DVI AUDIO IN Anynet Device 1 cen N a eS H Anynet Home Theatre Device 2 1 Connect the HDMI IN 1 DVI 2 ARC jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack o
101. onnected to a PC E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting game mode amp NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly e Game Mode is not available in TV mode or HDMI1 DVI mode when a PC is connected e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality e f Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie E BD Wise Off On Provides the optimal picture quality for Samsung DVD Blu ray and Home Theatre products which support BD Wise When BD Wise is turned On the picture mode is automatically changed to the optimal resolution Available when connecting Samsung products that support BD Wise through a HDMI cable E Boot Logo Off On Display Samsung logo when the TV is turned on E TV Name Sets the TV name so you can find it easily on a mobile device S If you select User Input you can type on the TV using the OSK On Screen Keyboard Anynet Gaia For details on set up options refer to the Anynet HDMI CEC instructions p 63 DivX Video On Demand Shows the registration code authorized for the TV
102. our company In addition do not use the power cord of another electric appliance e Otherwise it may result in electric shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product iz Installation Related Ad Warning Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep the plastic bags used to pack the product away from children e f children place the plastic bags over their heads they may suffocate Avoid installing the product in a location exposed to dust moisture Sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Engish Getting Started Avoid installing the product in a location exposed to direct sunlight and installing Avoid installing the product where children may reach it the product near a heat source such as a fireplace or heater e This may shorten the product life cycle or cause fire e fa child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Bend the outdoor antenna cabl
103. ove to the file you desired using the w 4 gt buttons and then press the ENTERL or gt Play button The file is played Device name Displays a connected device name File List Section You can confirm the files and groups that is sorted by each category jy Music_1 No Singer Jp Music_2 No Singer Music_3 No Singer Music_4 No Singer Home Return to content home Change Contents Device tid Changes the content type or a connected device s Sorting Displays sorting No Singer standard Sorting standard Music_7 is different depending on the voie contents veeg Edit Mode Select and play No Singer multiple files or assign them to My Playlist This function is available only for Music Music_9 No Singer Page bar Moves to another page containing a list of files i Recorded TV E Timeshift Function You can pause a live TV or start watching the TV programme from the beginning point you started Timeshift function Start Timeshift function with PAUSE button 1 When you are watching a TV channel press the Lu PAUSE button 2 The image of TV programme will be paused and then Timeshift bar will appear Live TV is displayed on the left side of Timeshift bar Start Timeshift fuction with PLAY button 1 When you are watching a TV channel press the gt PLAY button 2 The Timeshift function starts and the Timeshift bar will appear Live TV is displayed on the lef
104. peaker SS When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker e TV Speaker On External Speaker On amp If there is no video signal both speakers will be mute E Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Reset Sound Yes No Reset all sound settings to the factory defaults Engish 3 Basic Features NetworkMenu O Network Settings MENU M Network Network Settings ENTER L Network Status AllShare Settings e The displayed image may differ depending on the model Set the network connection to use various Internet services such as Smart Hub AllShare and perform software upgrades Network Status M MENU 1 Network Network Status ENTERC You can check the current network and Internet status AllShare Settings MENU M Network AllShare Settings ENTERC Selects whether to use the call arrivals text message contents and schedules set on the network i Wired O Network Settings Auto Use the automatic Network Settings when connecting your
105. r 1 On Timer 2 On Timer 3 Three different E ET ee oon on timer settings can be made You must set the clock first On Timer 1 Time Volume Source Antenna Channel Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the date you ve selected Time Set the hour and minute Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select the desired antenna source Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp NOTE e If there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly e When there is only one photo file in the USB the Slide Show will not play If a folder name is too long the folder cannot be selected e Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Timer The On Timer func
106. red level QD According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and 0dB amp amp To increase or decrease the volume adjust between the range O and 10 respectively E SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio output SPDIF format S The available Digital Audio output SPDIF format may differ depending on the input source Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250mg E Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound S Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31cB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20aB Speaker Settings E Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External S
107. roblem with the product electric shock or fire Displaying a still image for a long time may create a persistent image or stain on the screen e f you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Do not place the adapter on top of 2D URET another agapler _ e Otherwise it may result in fire Remove the vinyl cover of the adapter before using the adaptor e Otherwise it may result in fire Be careful that adaptor should not be in contact with water and therefore not be wet e This may cause a malfunction electric shock or fire Do not use adaptor by the waterside or outside particularly when it rains or snows Be careful that adaptor should not be wet while cleaning floor with water Avoid placing a liquid container such as Do not press down hard on the product The product may become deformed or damaged When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fa
108. rs and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process How to set up automatically r Network Settings Select a network connection type Wired Wireless general Previous WPS PBC Set up a wireless network by selecting your wireless router You may need to enter a security key depending on the Cancel settings of the wireless router Next One Foot Connection J The displayed image may differ depending on the model Go to Network Settings screen To enter it follow the directions of Network Settings Select the Wireless general The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the or w button to select a network and then press the ENTERC button S If the wireless router is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security key to establish the connection If the Security screen pop up appears go to step 6 If you select the wireless router which does not have security go to step 7 If the wireless router has security enter the Security key Security or PIN then select Next Networ
109. social networking service SNS Search All Easily search and access content from diverse sources e g applications Your Video AllShare Your Video Enjoy your movie watching with a customized Your Video video on demand VOD EEEE EEEES recommendation service e This feature is limited to certain regions Smart Hub Smart Hub brings useful and entertaining contents and services OGI ol H Your Video Samsung Apps directly from the web to yon ee zi S yi PINA The Gateway to all content integrated in one place e va NY ah e It s all integrated to guide you to easier and diverse Gero ha anette of etiniu on th e nte rtai n me nt ch O ices f For some of the countries listed local language characters might not be display properly e Control your entertainment life with easy and simple user on Gq g friendly Ul Sx pA ae i Favourites Channel Recorded TV Videos Photos e Access to diverse Apps that are adding up every day re dj e Customize your TV by App grouping amp sorting to your taste Music Schedule Man Source AllShare Login Sort by Edit Mode Settings e The displayed image may differ depending on the Screen Display mee You can search for various types of content that can be used on your TV Enter a keyword to search for media various applications or online information that you can use on the TV f SART HUB Search Q Your Video dy Samsung Apps AET a la w F
110. t Edit Mode and then press the ENTERC button 2 Press the q a button to select the desired music file in the file list and then ENTER C button NOTE e The check box mark appears to the left of the selected files e To select all the files in the current page select Select All at the top e To cancel a selection press the ENTERL button again 3 Press the q a w button to select Play The selected music files will be play Engish 59 Advanced Features Photos Viewing a Photo or Slide Show 1 Press the gt a w button to select the desired photo in the file list 2 Press the ENTER C button e When you press the gt Play button in the file list slide show will be started immediately e All files in the file list section will be displayed in the slide show e During the slide show all files in the file list will be displayed in order gt Normal amp Music files can be automatically played during the Slide Show if the Background Music is set to On Friends jpg S The Background Music Setting cannot be changed until the BGM has finished loading Smart Hub Additional Function 1024 X 768 2011 01 08 ad Sorting the file list To sort files in the file list select the 2 Sorting by using the 4 gt A Y button And then press the ENTER C button Ei Category Default Folder View Title Latest Date Earliest Date Artist Album Genre Monthl
111. t side of Timeshift bar Mon Oct 09 09 50 pm BBC London News DTV Cable Dolby Digital PITT OR DEAD EF 7 888 888 TV PG V S L D Undefined Sports REC Pause TON y Ni e Whi aes A e The displayed image may differ depending on the model Mon Oct 09 09 50 pm BBC London News DTV Cable Dolby Digital PIT OR DEAE Pai 888 888 What s On TV PG V S L D Undefined Sports REC Pause gt 01 02 15 02 04 10 888 888 BBC1 BBC London News e The displayed image may differ depending on the model Engish 53 Advanced Features Timeshift information You can see current information about Timeshift function 1 Press the ENTERC button on your remote while Timeshift function is enabled 2 Timeshift bar appears as below e Timeshift Screen Shows current playback point fon Oct 09 09 50 pm BBC London News HD 16 9 1080p Ki Aas mmeg cf AP TV PG V S L D Undefillid Sports DTV Cable Dolby Digital Shows recorded time by Timeshift function Mode Display Shows current states of Timeshift function The past icon appears when current scene is the previous Shows progress bar Playback control button during Timeshift function is enabled e Each time press the SEARCH lt lt gt gt button the playback speed change as follows lt 1 lt 2 lt 6 lt 7 gt gt i p gt 2 gt gt gt 6 gt gt 7 e 4 button Jump to 20 sec from
112. ted amp Adjusts the Position by using a V 4 P gt button Smart View 1 Reduces the 16 9 picture by 50 Smart View 2 Reduces the 16 9 picture by 75 amp Smart View 1 Smart View 2 is enabled only in HDMI mode amp The picture size can vary depending on the input resolution when content is played using Videos under Media contents or Smart Hub English 28 Basic Features amp NOTE e Depending on the input source the picture size options may vary e The available items may differ depending on the selected mode e In HDMI1 DVI mode when a PC is connected 16 9 and 4 3 modes are available e Settings can be adjusted and stored for each external device connected to an input on the TV e If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function e When Double WE mm mode has been set in PIP the picture size cannot be set Input Source Picture Size ATV AV Component 48014805 UNO Wide 16 9 Zoom 4 3 HDMI 720p 1080i 1080p Smart View 1 DTV 1080 HDMI 720p 1080i 1080p Sman VIEW DTV 1080 mp Component 1080i 1080p HDMI 720p 1080i 1080p HDMI1 DVI when a PC is connected Wide Zoom Screen Fit 16 9 4 3 M 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 New Zealand Singapore only Available only when picture size is set to Auto Wide You can determine the desired picture size at the
113. ted file Engish 61 Aavanced Features AllShare connects your TV and compatible Samsung mobile phones devices through a network On your TV you can view call arrivals SMS messages and schedules set on your mobile phones In addition you can play media contents including videos photos and music saved on your mobile phones or the other devices Such as your PC by controlling them on the TV via the network D If your Samsung TV connects to a non Samsung DLNA server a compatibility issue may occur during video playback amp By connecting your Samsung TV to a network via AllShare you can use Samsung s original functions as follows e Playback of various video formats DivX XVID MP4 3GPP AVI ASF MKV etc Video thumbnail feature Bookmark function to resume video playback Auto chaptering Scene navigation Digital content management Compatibility with various subtitle formats SRT SMI SUB TXT TTXT e Search with file names e And many others SS To use the original DLNA functions of Samsung fully it is recommended that you use the AllShare software provided with your TV amp For more information visit www samsung com or contact the Samsung call center Mobile devices may need additional software installation For details refer to each device s user s guide E Setting Up AllShare MENU Network AllShare Settings gt ENTER C AllShare Settings E Media On Off
114. the How to set up automatically procedure 2 Select the IP Settings on network test screen 3 Set IP Mode to Manual 4 Press the w button on your remote to go to the first entry field 5 Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another 6 When done select the OK 7 The network connection screen appears and network setting is done WPs PBC How to set up using WPS PBC If your router has a WPS PBC button follow these steps f Network Settings Select a network connection type Wired Wireless general Connect to wireless router Previous easily by pressing the WPS PBC button Choose this Next if your Wireless router supports push button configuration PBC Cancel s WPS PBC One Foot Connection 1 Go to Network Settings screen To enter it follow the directions of Network Settings Select the WPS PBC Press the WPS PBC button on your router within 2 minutes Your TV automatically acquires all the network setting values it needs and connects to your network oO N 4 The network test screen appears and network setting is done f One Foot Connection The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot 25cm from samsung TV If
115. through a network connection Engish B Advanced Features Before using media contents functions S tt might not work properly with unlicenced multimedia files Need to Know List before using media contents MTP Media Transfer Protocol is not supported The file system supports FAT16 FAT32 and NTFS Note that the supported maximum file size is 2GB for FAT16 and 4GB for FAT32 Certain types of USB Digital camera and audio devices may not be compatible with this TV Media contents only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated USB 2 HDD port Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the files are sorted by Folder View up to 1000 files can be displayed in each folder MP3 files with DRM that have been downloaded from a non free site cannot be played
116. tion may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized E Off Timer 1 Off Timer 2 Off Timer 3 Three different off timer settings can be made You must set the clock first Off Timer 1 Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The Y mark indicates the date you ve selected Time Set the hour and minute A Economical Solutions MENU Ol System Eco Solution ENTERC Eco Solution E Energy Saving Off Low Medium High Picture Off Ea This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal _ Disabled when a PC connected to the HDMI1 DVI port is in power saving mode Mm Auto Power Off Off On Saves power by turning TV off automatically when no user operation is received for 4 hours Engish 4L Basic Features Locking Programmes MENU MI System Security ENTERC Security The PIN
117. ture Install the product so the required distances shown in the figure are kept amp The appearance may differ depending on the product potter ee ee ee ee ep ee ee ee ee ee He 10 cm 10 cm English 2 Contents Getting Started 4 11 12 13 Connections 14 14 15 17 18 20 rA Basic Features 29 23 23 27 28 34 36 40 44 Advanced Features 46 51 62 63 Other Information 6 This function can be used by pressing the TOOLS button on the remote control 68 68 69 74 75 Safety Precautions Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug amp Play Initial Setup Connecting to an AV Device Connecting to an Audio Device Connecting to a PC Changing the Input Source Network Connection How to Navigate Menus Using the INFO button Now amp Next guide Using the Channel Menu Channel Menu Picture Menu Sound Menu Network Menu System Menu Support Menu Getting Started with Smart Hub Using the Smart Hub About AllShare Anynet HSITONA Analogue Channel Teletext Feature Assembling the Cables Anti theft Kensington Lock Troubleshooting Specifications Index Check the Symbol D Step by Step Guide English 3 Getting Started Icons used for safety precautions Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality Failing to follow the prec
118. udio output setting on your PC First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test p 44 If the test image is properly displayed the poor picture may caused by the source or signal If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto programme amp Many HD channels are up scaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may cause noise in picture on analogue and digital TV If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Adjust the Picture options in the TV menu go to Picture Mode Colour Brightness Sharpness p
119. ur LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable See the diagram below The Modem Port on the Wall External Modem ADSL VDSL Cable TV Modem Cable LAN Cable e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use LAN cable for the connection See the diagram below The LAN Port on the Wall ADSL VDSL Cable TV having DHCP server Sera o Modem Cable LAN Cable LAN Cable e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The LAN Port on the Wall LAN Cable e f you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values your TV needs to access the Internet so you do not have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the I
120. will only be enabled in mode e Some Picture functions are disabled in 3D mode Before using 3D function amp Recommended 3D operating distance Recommended pairing distance a pr os Recommended viewing distance 2 6m Recommended viewing distance 2 6m 6 to 19 5 ft Recommended pairing distance 2 6m 6 to 19 5 ft amp NOTE e 3D mode is automatically disabled in following cases when changing a channel or the input source or accessing My Contents or Smart Hub e Some Picture functions are disabled in 3D mode e PIP is not supported in 3D mode Engish B L Basic Features E Changing the Picture Options Advanced Settings MENU OI Picture Advanced Settings ENTERL Advanced Settings are available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast amp In HDMI DVI mode when a PC is connected only Gamma and White Balance are available Advanced Settings Dynamic Contrast Medium Shadow Detail Gamma Expert Pattern RGB Only Mode Colour Space Native Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Dynamic Contrast Off Low Medium High Adjust the screen contrast E Shadow Detail 2 2 Increase the brightness of dark images E Gamma Adjust the primary colour intensity E Expert Pattern Off Pattern1 Pattern2 By running the Expert Pattern
121. y Weekly Channel Default is sorted by Title without Group Pow o Displays the whole folder You can view the file name and thumbnail by selecting the folder Sorts and displays the file title in Symbol Number Alphabet Special order Pov ft vw Sorts and shows files by the latest date Pov ft ow I lt lt lt lt lt Sorts and shows files by the earliest date fF ov tw Sorts the music file by artist in alohabetical order NV Music Photos La NV NV Vv Iy y Iy So ma English 60 Advanced Features Videos Music Photos Play Option menu The following functions are enabled during playback Category List Resume Play continuosly Play Pause Set Section Repeat Edit Favourites Scene Search Title Search Time Search Repeat Mode Shuffle Mode Picture Size Sound Mode Picture Mode Subtitle Previous Next Subtitle Setting Start Slide Show Stop Slide Show Slide Show Speed Slide Show Effect Background Music On Off Background Music Setting Zoom Rotate Return to the file list Vv A movie file will begin to play from where it was stopped o You can start or pause a video or music file Alternatively the gt Play or ae a C Ov You can set up the function to repeat some section You can also watch some section you want to TV NV NV NV Set files you watch frequently as favourites NV You can use the Scene Search function during playback to view
122. y Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected amp The Teletext Language menu may not be displayed in countries that do not support TTX Subtitle Use this menu to set the Subtitle mode E Subtitle Off On Switches subtitles on or off E Subtitle Mode Normal Hearing Impaired Sets the subtitle mode AD SUBT O E Subtitle Language Sets the subtitle language S Ifthe programme you are watching does not support the Hearing Impaired function Preferred automatically activates even if the Hearing Impaired mode is selected S English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable New Zealand only If the programme broadcasts with digital text this feature is enabled Auto Protection Time E Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen Engish 4D Basic Features General E Max Power Saving Off On Turns off the TV to reduce power consumption after the PC has been left idle for a specified period of time Available only when the HDMI1 DVI port is c
123. your wireless router does not support One Foot Connection you must connect using one of the other methods amp amp You can check for equipment that supports One Foot Connection on www samsung com How to set up using One Foot Connection Turn on the power of wireless router and TV f Network Settings Select a network connection type Wired VUGGER 0 EGE Previous WPS PBC Connect to the wireless Next network automatically if your access point supports One Foot Connection Select this One Foot Connection Cancel connection type after placing the access point within 10 inches 25 cm of your product 1 Go to Network Setting screen To enter it follow the directions of Network Setting 2 Select the One Foot Connection English 38 Basic Features 3 Place the wireless router in parallel with the Samsung Wireless LAN adapter giving a gap no larger than 25cm amp If One Foot Connection does not connect your TV to your Router a pop up window appears on the screen notifying you of the failure If you want to try using One Foot Connection again reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1 You can also choose one of the other connection setup methods 4 The network connection screen appears and network setting is done 5 Place the wireless router in a desired location If the wireless router settings change or you

Samsung T27A950

Contents

Download Pdf Manuals

Related Search

Related Contents