Lenco SCD-38 USB
Contents
1. leg groove buckle groove 3 Playing media 3 1 Playing a CD or MP3 e Open the CD door and place a disc in the CD compartment with the label side up e Close the CD door e Slide the FUNCTION switch to CD USB AUX IN position e For operating the CD MP3 see chapter 1 NOTE no will show in the display if there is no disc in the CD compartment or if there is a disc error Li B I PROG PLAY point REP point LED Display 3 2 Repeat play e Press REPEAT button once it will flash REP point and play the current track over and over e Press REPEAT button twice it will flash folder SN And display track SN Alternatively and play the tracks in the current folder over and over e Press REPEAT button thrice it will display REP point and repeat playing all tracks in order 3 3 Programmed play You can make a program of up to 20 tracks in the order you want them to be played e During disc or USB playback press STOP button to stop playback e Press PROGRAM button to display and flash P 01 e Press PREV NEXT button to select your desired track and press PROGRAM button to confirm Note For MP3 WMA you can quickly select your desired tracks to program such as press FOLDER button to display and flash the current folder SN and press FOLDER button to select your desired track in the folder e REPEAT step 3 to program other tracks till you finish programming up to 20 tracks e Press the PLAY2. If the player is left in a car parked in the sun be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun Since a strong magnet is used for the speakers keep personal credit cards using magnetic coding or spring wound watches away from the player to prevent possible damage from the magnets Power Sources For battery operation use 6 size C batteries Lenco recommends using A brand batteries for longer life amp results When the batteries will not be used for a few weeks or more remove them to avoid damage that can be caused by battery leakage or corrosion Battery shall not be exposed to excessive heat such as sunshine fire or the like If at any time in the future you should need to dispose of this product please note that All batteries and accumulators need to be removed from this product Removal of Waste Batteries and Accumulators WARNING Do not install this equipment in a confined or building in space such as a book case or similar unit and remain a well ventilation conditions at open site The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc WARNING Only use attachments accessories specified or provided by the manufacturer such as the exclusive supply adapter battery etc WARNING Please refer the information on exterior bottom enclosure for electrical and safety information
3. Lenco SCD 38 USB PORTABLE FM RADIO WITH CD MP3 PLAYER AND USB CONNECTION User manual English Lenco recommends attentive reading of the manual before operating the unit For information and support www lenco eu V1 0 Table of content BOX CONTENT das cca AN 2 Important NOLES eena ce el eee alt ates dee or eal desseaeee e 3 Mantenan Ones oh cise eee Oe e cae ete hye ee elec iene cee 4 1 Exploring the unit amp basic controls 5 1 1 Parts on the front view side of the player ssesseseseeresierresisrrerrerierinsirerrsrrerrereees 5 1 2 Parts on the left view side of the player sssssessrsssierierierrerisrrsrrerierinsrrerrsrrerrerreees 6 1 3 Parts on the rear view side of the player ssseeseeserierierierisrrsrrsrieriesrrerrsrrerrerreees 7 1 4 Parts on the right view side of the Player cece eee ceseeeeeeeseeeeeetsaeenaeeeneeeneeeneees 7 2 Connecting to a power SOUICE 8 2 1 Connecting the AC power cord 0 0 eeeeceeseeeeeeeeeeeeeeeeteeseneenaeseaeeeaeesaeeseetneeseeeeaes 8 2 2 Using the playerion batteries 2s acess se 8 g Playing VOGAL Cente eae AS oe a Seco ease cee i eae 8 3 1 Playing a CD or MPS iinne te eile ce a eset 8 3 2 Repeat plays i ascin ested Auctiasceh 9 3 3 Programmed playin aa i nd a aaae e aaa Se teases 9 3 4 Connecting a USB device 9 3 5 Playing other audio source through your Set 10 4 Listening to the radio 10 5 Trouble shooting 11 6 Spe
4. before installing or operating the apparatus WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids such as vases shall not be placed on apparatus WARNING The battery battery or batteries or battery pack shall not be exposed to excessive heat such as sunshine fire or the like WARNING The mains plug is used as disconnect device the disconnect device shall remain readily operable The USB memory stick should be plug in the unit directly USB extension cable should not be used to avoid failing of data transferring and interference caused Lenco recommends keeping the packaging to avoid damages during future transportation CD Before playing clean the CD with a cleaning cloth Wipe the CD from the center out Do not expose the CD to direct sunlight or heat sources such as hot air ducts not leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car Do not stick paper or stickers on the CD nor scratch the CD After playing store the CD in its case If there is a scratch dirt or fingerprints on the CD it may cause a tracking error or skipping If the player is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the CD player section Should this occur the player will
5. not operate properly In this case remove the CD and wait about an hour for the moisture to evaporate To be completely disconnect the power input the mains plug of apparatus shall be disconnected from the mains As the disconnect devices is the mains plug of apparatus The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use This CD player is designed to be played on a stable no vibration position If you bump the set during CD play the music will stop or skip for a few seconds This is normal for this type of player Scratched discs If your disc is badly scratched it will not play You may be able to repair the disc if you buy a disc polisher Maintenance Cleaning the Lens If the lens becomes dirty it may cause a skipping of sound during CD operation Clean with a commercially available lens cleaner and blower or carefully wipe it with a soft dry cloth Cleaning the Cabinet Clean the cabinet panel and controls with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzene 1 Exploring the unit amp basic controls 1 1 Parts on the front view side of the player 1 2 o 10 11 12 13 14 Folder During MP3 WMA playback press FOLDER button to flash the current folder SN When flashing folder SN press FOLDER button to select next fol
6. PAUSE button to start programmed play Play all the programmed tracks repeatedly In program play mode press the REPEAT button once to repeat the current programmed track press the REPEAT button twice to repeat all programmed tracks Change the current program Just create a new program following the programming procedure Cancel programmed play Press the STOP button twice or slide the FUNCTION switch to OFF position 3 4 Connecting a USB device Connect the USB device to the USB terminal of the main unit Slide the function switch into CD USB AUX IN position The unit will read the content that is available on the USB device automatically 4 Operation is the same as when playing a CD on gt Notes e When disc play then insert the USB the unit will automatically switch to play USB e When USB play then place the disc the unit will automatically switch to play the disc e When the existence of USB and the disc the unit will play USB at first e The USB memory stick should be plug in the unit directly USB extension cable should not be used to avoid failing of data transferring and interference caused 3 5 Playing other audio source through your set You can enjoy the music of any external audio source through the set Via 3 5mm st jack Note 3 5mm stereo jack cable is not included 1 Insert the audio cable with one end into the HEADPHONES jack or LINE OUT jack of your external audio source and the other end into t
7. cificatio Men ene e e dondeceausdda bates uel Ee aeea ASEEN 12 7 PBC YOUNG ates casters a a E R 12 Dear Customer Thank you for purchasing this Portable FM radio with CD MP3 player and USB connection When opening the box for the first time please check whether all the accessories are present Before connecting parts and power please carefully read the user manual and always keep these instructions close by your Portable FM radio with CD MP3 player and USB connection Box content 1x Main unit 1x User manual Note if some parts are missing please contact your dealer as soon as possible Important notes Safety As the laser beam used in the CD player section may be harmful to the eyes do not attempt to disassemble the cabinet Refer servicing to qualified personnel only The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus Should any solid object or liquid fall into the player unplug the player and have it checked by qualified personnel before operating it further Placement Do not leave the player in a location near a heat source or in a place subject to direct sunlight excessive dust or mechanical shock Do not place the player on an incl unstable place Do not place anything within 1 inch of the back of the cabinet The ventilation holes must not be covered for the player to operate properly and prolong the life of its components
8. der and play the first track in the folder NEXT skip next track Press and hold the button to fast forward play during play mode PREV skip to beginning of the current or previous track Press and hold the button to fast backward play during play mode Repeat repeat a track folder or whole media Power LED indicator LED on main unit is on LED off main unit is off Display FM ST LED indicator LED on main unit is in FM stereo mode LED off main unit is in FM mono mode Stop Press this to stop playback Play pause Press this to play CD or USB When the unit is in CD USB Mode see function switch 16 When pressed in play mode pause mode is set Press again to resume playback PROG Programming your desired tracks and its sequence to play OPEN CLOSE open or close CD door CD door FM antenna Speakers 15 USB socket To connect a USB devise 1 2 Parts on the left view side of the player l a gr SS S OFF RADIO a a CD USB VOLUME AUXIN 16 Function switch 17 VOLUME control increase decrease the volume 1 3 Parts on the rear view side of the player 18 AUX IN socket Input audio signal 19 AC IN socket 1 4 Parts on the right view side of the player 20 Tuning control 21 FM MONO STEREO Switch 22 FM frequency dial 2 Connecting to a power source You can use the AC power or batteries as a power source Note Batteries are not included 2 1 Co
9. he AUX IN jack of the set 2 Slide the FUNCTION switch to CD USB AUX IN position 3 Slide the FUNCTION switch to OFF position after use NOTE When connecting an audio player to the set while the set is playing CD the set will exit CD mode and switch to AUX IN mode automatically 4 Listening to the radio Slide the FUNCTION switch to RADIO position the POWER lamp will turn on Slide the FM MONO STEREO switch to the proper position that you prefer Tune into the station you prefer using the TUNING control Slide the FUNCTION switch to OFF position to turn off the radio BONS 10 5 Trouble shooting Please refer the following instruction when there are some problems with the unit If the problem still exits please consult your dealer Problem General CD Player Radio The unit does not turn on Remedy Check the AC power cord Check the batteries inserted correctly and new Check the FUNCTION switch There is no sound wow or nl Appears in the display Adjust the volume Is the disk format supported CD does not play Is the CD compartment closed Take out the CD and leave the CD DOOR open for about an hour to dry moisture condensation Make sure the CD is not scratched Clean the CD Make sure the FUNCTION switch is at CD USB AUX IN position If connected disconnect the audio cable from the AUX IN jack The sound drips out Clean the CD or replace i
10. nnecting the AC power cord Insert one end of the supplied AC power cord into the AC IN socket located at the rear view of the player and the other end to the wall outlet Note If the plug of the AC power cord does not match your outlet do not force it Reverse it and try again The plug is polarized and only fits one way into the wall outlet and rear of the set 2 2 Using the player on batteries Loading the batteries TTT 1 Roll over the apparatus so that the battery door becomes visible 2 Use one finger to press the sagging block towards the arrow on the battery cover and then push the cover to the arrow until hearing a click now hold the front edge of the cover and turn up to remove it 3 Place 6 size C batteries into the battery compartment according to the direction of 2 l and electrode marked inside the battery i pE compartment leg groove i 4 Make the buckle of the cover towards to buckle groove and make the 4 legs of the cover face to the leg grooves to wedge the cover onto the player and then push it into previous position close Important Remove the AC power cord while operating the unit on batteries Notes e Lenco recommends the use of A Brand batteries e Replace the batteries when the POWER lamp dims or when the player stops operating e If the CD does not play this means the batteries are almost empty leg groove
11. t if the CD is badly damaged Place the player in a location free from vibration Check if your batteries are okay CD does not play while the radio continues to play on battery power The sound is weak or has poor quality 11 It is normal since the radio uses less power than the CD player Replace all the batteries with new ones or bring the set near a window or rotate the set antenna 6 Specification Power source AC 230V DC 9V 6 size C batteries Power consumption lt 1 W in standby mode function switch is in OFF position lt 9 W during operation function switch is in non OFF position Speakers 4 ohms Output power 1 0W channel Dimensions 259 X 223 X 118 Weight 1295g without batteries Playable disc type and format Type CD DA CD R CD RW Format CD MP3 WMA Max tracks folders 1 USB Max files 999 Max folder 128 Max files in folder 128 2 MP3 CD WMA CD Max folder file 511 e g 1folder 510 songs 2 folders 509 songs etc Max folder 256 Radio Frequency range FM 87 5 108 MHz 7 Recycling that Waste electrical products should not be disposed of with household waste X If at any time in the future you should need to dispose of this product please note Please recycle where facilities exist Check with your local authority or retailer for recycling advice Waste Electrical and Electronic Eq
12. uipment Directive Removal of Waste Batteries and Accumulators Directive If at any time in the future you should need to dispose of this product please note that All batteries and accumulators need to be removed from this product Removal of Waste Batteries and Accumulators
Download Pdf Manuals
Related Search