Cisco VWIC3-1MFT-T1/E1
Contents
1. group 2 total 2 total 4 total 2 per port 2 per port 1 per port Voice Only Voice CAS ds0 group 24 total T1 48 total T1 96 total T1 31 total E1 62 total E1 124 total E1 1 per timeslot 1 per timeslot 1 per timeslot Voice Video and Data PRI pri group 1 total 2 total 4 total 1 per port 1 per port 1 per port Drop amp Insert tdm group 24 total T1 48 total T1 96 total T1 31 total E1 62 total E1 124 total E1 1 per timeslot 1 per timeslot 1 per timeslot Channel Group refers to bonding of one or more timeslots into a single HDLC framed serial connection for IP data traffic connectivity This is used for HDLC Frame Relay and MLPPP serial WAN connections DsO Group refers to Bonding of one or more timeslots into a single TDM voice connection using Channel Associated Signaling CAS such as E amp M FXS or FXO This is used for TDM PBX or PSTN connections and typically deployed only on T1 PRI Group refers to bonding of two or more timeslots into a single TDM connection using ISDN signaling This is typically used for TDM PBX or PSTN voice and video connections on T1 and E1 and also for data WAN connections on E1 Each call on the PRI is individually indicated as being a voice video or data call with the ISDN bearer capability delivered with the call Signaling is done on the D channel which is always channel 24 ona T1 and channel 31 on an E1 TDM Group refers to cross connecting o2. require a minimum of the UC technology package which is optional Data Features e T1 E1 or fractional T1 E1 network interface e nx 64 kbps or n x 56 kbps non channelized data rates T1 n 1 to 24 E1 n 1 to 31 e Standards based including ANSI T1 403 and AT amp T Publication 62411 Network Interfaces Specifications Table 5 T1 Network Interface Specifications T1 Network Interface Transmit Bit Rate 1 544 Mbps 50 bps 32 ppm Receive Bit Rate 1 544 Mbps 50 bps 32 ppm Line Code Alternate mark inversion AMI binary 8 zero substitution B8ZS AMI Ones Density Enforced for n x 56 kbps channels Framing Format D4 Super Frame SF and Extended Super Frame ESF Output Level line build out LBO 0 7 5 or 15 dB Input Level 1 dBO down to 24 dBO Data Terminal Equipment DTE Interface WIC mode Fractional service DTE Interface VIC mode G 704 or structured Data Communications Equipment DCE Interface G 704 or structured 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 6 of 9 Data Sheet a Table 6 E1 Network Interface Specifications E1 Network Interface Transmit Bit Rate 2 048 Mbps 100 bps 50 ppm Receive Bit Rate 2 048 Mbps 100 bps 50 ppm Data Rate 1 984 Mbps framed mode per E1 port Clocking Internal and loop recovered from network E1 National Bits Fixed nonconfigurable Enc
3. with all ports for voice applications clocked from a single source The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo tail length for demanding network conditions MFT VWIC3 cards support up to 2 channel groups per T1 E1 port for serial data applications Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards The Cisco MFT VWICS cards can be inserted into the EHWIC slot on the supported Cisco 1921 1941 1941W 2901 2911 2921 2951 3925 3945 3925E and 3945E integrated services routers The T1 E1 MFT VWIC3 cards support both T1 and E1 providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1 fractional T1 E1 and fractional E1 for both voice and WAN applications All MFT VWIC3 modules include the drop and insert multiplexing capability which eliminates costly external third party channel service units data service units CSUs DSUs and drop and insert multiplexers 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 1 of 9 Data Sheet a The Cisco MFT VWICS cards are offered in single dual and quadruple port versions which can be used and then redeployed as network requirements change thereby addressing several applications e T1 E1 data The Cisco 1 2 and 4 port T1 E1 MFT VWIC3 versions act as a WIC supporting T1 fractional T1 E1 including structured G 703 with G 704 framing frac
4. Afafe CISCO Data Sheet Cisco Third Generation 1 2 and 4 Port T1 E1 Multiflex Trunk Voice WAN Interface Cards These flexible interface cards support multiple integrated data voice and video applications facilitating the migration from data only as well as circuit switched voice video services to a packet voice video solution Introduction The Cisco Third generation 1 2 port and 4 port T1 E1 Multiflex Trunk Voice WAN Interface MFT VWIC3s support data and voice applications on the Cisco 1921 1941 and 1941W data only and the Cisco 2901 2911 2921 2951 3925 3945 3925E and 3945E Integrated Services Routers The Cisco MFT VWIC3 combines WAN interface card WIC and voice interface card VIC functions to provide unparalleled flexibility versatility and investment protection through its many uses Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1 E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications The 2 port T1 E1 MFT VWIC3 is shown below Figure 1 Cisco 1 2 and 4 Port T1 E1 MFT VWIC3 The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second generation 1 and 2 port T1 E1 Multiflex Voice WAN Interface Cards MFT VWIC2s The Cisco 2 and 4 port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications Voice applications can now be clocked independently from data applications
5. Sheet is for data and voice sharing of a T1 or E1 service the drop and insert capability also can be used for video and data or data and data sharing of the service Moreover the integrated drop and insert capability enhances system availability by allowing the Cisco IOS Software to be reloaded while maintaining TDM switching Figure 2 Drop and Insert to Share a T1 FT1 or E1 FE1 Service between Data and TDM Cisco1900 2900 3900 Multiflex PBX Central Office To illustrate consider the example of a PBX with a T1 interface that needs to support a maximum of 10 simultaneous calls With 24 DS 0 channels in a T1 service 1 544 Mbps this leaves 14 DS 0 channels or 896 kbps of bandwidth for data from the router 14 x 64 kbps The number of DS 0 channels assigned for PBX calls and the remainder that are available for use with router data are fully configurable statically not dynamically In the case of an E1 service 30 DS 0 channels are available for division between voice and router data In this example one port of the Cisco 2 port T1 E1 MFT VWIC3 is connected to the PBX and the other port is connected to the central office The 10 DS 0 channels from the PBX are TDM switched to the central office port and this switching is done on the MFT VWIC3 itself The configuration of this TDM switching is flexible so that DS 0 channels on the PBX port do not have to be mapped to DS 0 channels with the same time slots on the centr
6. al office port The remaining 14 DS 0 channels on the MFT VWICS central office port terminate through the backplane connector of the VWIC3 on the router as a single aggregate channel group The 14 DS 0 channels are not individually addressable by the router as a channelized service but can be split into one or two channel groups The drop and insert function is included in all the Cisco MFT VWIC3 interface cards The term drop and insert is normally used when router data or data from another data device is multiplexed with voice calls A more generic term for drop and insert is digital cross connect For example a single T1 connection from a PBX to the PBX port on the MFT VWIC3 can be divided between DS 0 channels that are packetized for example VoIP and DS 0 channels that are TDM switched to the central office port of the MFT VWIC3 for standard circuit switched voice connectivity Analog Cross Connect Solution The time division multiplexing TDM DSO channels can be cross connected with analog voice ports to create an analog cross connect solution This capability is supported on the 2900 and 3900 series routers Support on Network Module MFT VWICS3 interface cards are supported on EHWIC slots only MFT VWIC2 interface cards are supported on Voice capable network modules 2 slot IP Communications Enhanced Voice Fax Network Modules NM HD 2VE and IP Communications High Density Digital Voice Fax Network Modules NM HDV2 IP C
7. condensing nonoperating Regulatory Compliance Table 7 gives regulatory compliance information for the Cisco MFT VWIC3 cards Table 8 Regulatory Compliance for Cisco MFT VWIC3 Cards Safety EMC Immunity EMC Emissions Network Equipment Building Standards NEBS e UL 60950 e EN55024 CISPR24 e CFR 47 Part 15 Class A e GR 63 e CAN CSA C22 2 No 60950 e EN61000 4 2 e ICES 003 Class A e GR 1089 Type 1 3 e IEC 60950 1 e EN61000 4 3 e EN55022 Class A e EN 60950 1 e EN41000 4 4 e CISPR22 Class A e AS NZS 60950 e EN41000 4 5 AS NZS 3548 Class A e EN41000 4 6 e VCCI Class A e EN41000 4 8 e EN 300386 e EN41000 4 11 e EN61000 3 2 e EN50082 1 e EN61000 3 3 e EN61000 6 2 e ITU T K 21 Telecom Homologation Homologation requirements vary by country and interface type For specific country information refer to the online approvals data base at http tools cisco com cse prdapp jsp externalsearch do action externalsearch amp page EXTERNAL SEARCH amp modul e EXTERNAL SEARCH T1 Compliance partial list e TIA 968 A e CS 03 e Jate e ANSI T1 403 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 8 of 9 Data Sheet a E1 Compliance partial list e TBR4 TBR12 TBR13 e ITU T G 703 G 704 G 823 1 431 e S016 Australia Ajaj Americas Headquarters Asia Pacific Headquarters Europe Headquarters Cisco Systems Inc Cisco Systems USA Pte Ltd Cisco Sys
8. d data on the same trunks Cisco 1900 2900 and 3900 ISR routers support drop and insert between ports over a single MFT VWIC3 card and two ports over two different MFT VWIC3s Key Benefits Reduces Networking Lifecycle Costs e Enables graceful migration from data only to multiplexed data and voice to packetized voice applications e Reduces training deployment management and sparing inventory over single purpose interfaces e Maximizes investment protection e Simplifies network configuration and sparing through the support of both T1 and E1 on the same card e Offers multifunction support for LAN to LAN routing multiplexed data and voice and packetized voice e Offers ability to share modules among Cisco 1900 2900 and 3900 Series routers e Increases configuration flexibility and reduces cost for data applications by allowing individual ports to be clocked from independent clock sources not supported for voice applications since all voice enabled ports must be clocked from a single clock source e Supports E1 configurations for both balanced and unbalanced modes e Supports G 703 models unstructured E1 G 703 for using the full 2 048 Mbps e Eliminates costly external third party CSUs DSUs and drop and insert multiplexers e Simplifies remote network management by allowing a single management tool such as CiscoView or CiscoWorks to support router CSU DSU or drop and insert multiplexer Maximizes System Resources e Increases T1 E1 port d
9. e with a fully managed DSU CSU When used for data only WAN connectivity the Cisco MFT VWIC3 cards support numerous functions including Cisco IOS Software Command Line Interface CLI initiated loopback control similar to the popular 1 Port T1 Fractional T1 DSU CSU WAN Interface Card part number HWIC 1DSU T1 Additionally the MFT VWIC3 is also offered in quadruple port versions enabling increased WAN port density in Cisco 2911 2921 2951 and Cisco 3900 Series routers The T1 E1 MFT VWIC3 versions include integrated DSU functions for E1 deployments and integrated CSU and DSU functions for T1 deployments simplifying remote network management The Cisco 4 port MFT VWICS interface cards increase configuration flexibility on Cisco Systems integrated services routers eliminating the need for two dual port T1 E1 HWICs Increasing the T1 E1 port density in a single EHWIC slot helps enable applications such as local serial aggregation with the 2 port high speed serial WAN Interface Card part number HWIC 2T or ISDN backup with the 4 Port ISDN BRI S T WAN Interface Card part number HWIC 4B S T or the 1 port ISDN with NT 1 WAN Interface Card part number HWIC 1B U The Cisco MFT VWIC3 cards also support a channelized capability where the T1 or E1 service can be flexibly split into one or two fractional channel groups Thus a single physical port can provide connection to multiple sites The Third generation 1 and 2 port G 703 Multiflex Tru
10. ensity on the supported Cisco 2911 2921 2951 3925 3945 3925E and 3945E integrated services routers up to four T1 E1 connections with an integrated CSU DSU in a single EHWIC slot 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 2 of 9 Data Sheet a e Offers easy migration to bandwidth efficient packet voice enabling new services Customers can choose to integrate data and voice in stages to preserve their investment in WAN interfaces For example the Cisco MFT VWIC3 can support data only applications as a WAN interface and then be reused to integrate data and voice with the drop and insert multiplexer function or configured to support packetized voice voice over IP VoIP or voice over Frame Relay VoFR Applications Packet Voice Solutions PBX and Central Office Connectivity The Cisco MFT VWIC3 interface cards through its digital T1 E1 ports supply PBX and public switched telephone network PSTN connectivity for integrated services routers with the on board EHWIC slots The integrated services routers support H 323 Session Initiation Protocol SIP Media Gateway Control Protocol MGCP and Skinny Client Control Protocol SCCP based VoIP Data Solutions 1 2 and 4 Port T1 E1 WIC with Integrated DSU CSU The Cisco MFT VWIC3 interface cards simplify branch office connectivity by integrating the functions of a router T1 E1 and fractional T1 E1 serial interfac
11. ne or more timeslots from one TDM interface to another This is used to groom channels from different access points onto a combined T1 or E1 uplink Since the router merely cross connects and does not interpret or route the traffic from the ingress interface to the egress interface the traffic type voice video and data is transparent to the router 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 5 of 9 Data Sheet a Specifications Table 4 Part Number and Descriptions of Cisco MFT VWIC3 Cards Product Number Description VWIC3 1MFT T1 E1 1 Port T1 E1 Multiflex Trunk Voice WAN Interface Card VWIC3 2MFT T1 E1 2 Port T1 E1 Multiflex Trunk Voice WAN Interface Card VWIC3 4MFT T1 E1 4 Port T1 E1 Multiflex Trunk Voice WAN Interface Card VWIC3 1MFT G703 1 Port G 703 Multiflex Trunk Voice WAN Interface Card VWIC3 2MFT G703 2 Port G 703 Multiflex Trunk Voice WAN Interface Card Cisco IOS Software Release and Cisco IOS Software Feature Set License Requirements Refer to Table 1 for platform support The Cisco 1 and 2 port MFT VWIC3 cards are first supported in Cisco IOS Software Release 15 0 1 M3 and will be first available in the 15 0 1 M extended maintenance release The Cisco 4 port MFT VWIC3 card are first supported in Cisco IOS Softwae Release 15 1 3 T Data applications require the IP Base technology package which is included by default Voice applications
12. nk voice WAN Interface Cards product numbers VWIC3 1MFT G703 and VWIC3 2MFT G703 support not only unstructured E1 G 703 but also all the features of the other Cisco MFT VWIC3 cards including drop and insert Additional flexibility is provided on the 2 port G 703 Multiflex Trunk voice WAN Interface Cards with the capability to configure one port for unstructured E1 G 703 while configuring the other for standard framed E1 Multiplexed Data and Voice Solutions 2 and 4 Port T1 E1 Drop and Insert Multiplexer with Integrated DSU CSU The Cisco 1 2 and 4 port MFT VWICS interface cards simplify branch office connectivity by helping enable Cisco 2900 and 3900 routers to consolidate the functions of a router a fully managed drop and insert multiplexer and a fully managed DSU CSU into a single box It is possible to use two Cisco 1 port MFT VWIC3 interface cards for supporting the drop and insert feature Generally a Cisco 2 or 4 port MFT VWIC3 is more appropriate because at least 2 ports are required Typically a drop and insert multiplexer is used for channelized that is TDM integration of data and voice onto a single T1 fractional T1 E1 or fractional E1 connection to the central office Sharing a line can significantly reduce costs over those of two separate physical lines to the central office Although the normal use 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 3 of 9 Data
13. oding High density bipolar three HDB3 DTE Interface WIC mode Fractional service DTE Interface VIC mode G 704 or structured DCE Interface G 704 or structured Dimensions H x W x D MFT VWIC3 0 75 x 3 08 x 4 74 in 1 91 x 7 82 x 12 04 cm Weight e 1 port VWWIC3 1MFT T1 E1 0 18 Ib 82 g 1 port VWIC3 1MFT G703 0 18 Ib 82 g 2 port VWIC3 2MFT T1 E1 0 19 Ib 86 g 2 port VWIC3 2MFT T1 E1 0 19 Ib 86 g 4 port VWIC3 4MFT T1 E1 0 21 Ib 95 g Diagnostics e ANSI 71 403 Annex B V 54 loopup down code recognition network loopback and user initiated loopbacks network payload loopback local DTE loopback and remote line codes V 54 loop up and loop down e Bit error rate testing BERT patterns All 0 s all 1 s 1 2 1 8 3 24 QRW QRSS 63 511 2047 and V 54 T1 403 annex B bit patterns and two user programmable 24 bit patterns e Alarm detection Alarm indication signal AIS time slot 16 AIS remote alarm far end block error FEBE out of frame OOF cyclic redundancy check CRC multiframe OOF signaling multiframe OOF frame errors CRC errors loss of network signal red alarm loss of network frame receive blue alarm AIS from network receive yellow from network performance reports or error counters CRC errored seconds burst errored seconds severely errored seconds Ft and Fs framing errors for SF framing FPS framing errors for ESF framing and 24 hour history stored in 15 min
14. ommunications High Density Digital Voice NM with 1 T1 E1 part number NM HDV2 1T1 E1 and IP Communications High Density Digital Voice NM with 2 T1 E1 part number NM HDV2 2T1 E1 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 4 of 9 Data Sheet a Table 1 Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements Cisco 1900 Chassis 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 4 T1 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 N A EHWIC Slots 15 1 2 T 15 1 2 T 15 1 2 T 15 1 2 T Cisco 2900 Chassis 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 1 3 T EHWIC Slots 15 1 2 T 15 1 2 T 15 1 2 T 15 1 2 T Cisco 3900 Chassis 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 0 1 M3 15 1 1 T1 15 1 3 T EHWIC Slots 15 1 2 T 15 1 2 T 15 1 2 T 15 1 2 T VWIC3 4MFT T1 E1is supported on Cisco 2911 2921 2951 and Cisco 3900 Series routers Table 2 Cisco MFT VWIC3 Card Feature Comparison VWIC3 1MFT 1 Yes Yes No Yes Yes Yes T1 E1 VWIC3 2MFT 2 Yes Yes No Yes Yes Yes T1 E1 VWIC3 4MFT 4 Yes Yes No Yes Yes Yes T1 E1 VWIC3 1MFT 1 Yes Yes Yes Yes Yes Yes G703 VWIC3 2MFT 2 Yes Yes Yes Yes Yes Yes G703 Table 3 Cisco MFT VWIC3 Card Configuration Comparison Data Only Serial Data channel
15. tems International BV Amsterdam San Jose CA Singapore The Netherlands Cisco has more than 200 offices worldwide Addresses phone numbers and fax numbers are listed on the Cisco Website at www cisco com go offices Cisco and the Cisco Logo are trademarks of Cisco Systems Inc and or its affiliates in the U S and other countries A listing of Cisco s trademarks can be found at www cisco com go trademarks Third party trademarks mentioned are the property of their respective owners The use of the word partner does not imply a partnership relationship between Cisco and any other company 1005R Printed in USA C36 609138 01 09 10 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 9 of 9
16. tional E1 and E1structured G 703 applications To simplify remote management these MFT VWICS cards integrate a fully managed DSU CSU for T1 deployments and a fully managed DSU for E1 deployments e E1 G 703 data The Cisco 1 and 2 port G 703 MFT VWIC3 versions act as a WIC supporting T1 fractional T1 E1 including structured G 703 with G 704 framing fractional E1 and unstructured E1 G 703 applications To simplify remote management the G 703 version includes a fully managed DSU The G 703 versions also support all the capabilities on the T1 E1 versions e T1 E1 packet voice The Cisco 1 2 and 4 port T1 E1 MFT VWIC3 voice and WAN versions act as a VIC supporting packet voice applications by providing T1 fractional T1 E1 and fractional E1 connections to private branch exchanges PBXs and central offices thereby enabling new services and reducing voice and fax toll charges e Mixed data and packet voice The Cisco MFT VWIC3 interface cards can simultaneously support both data and voice reducing the complexity and number of network components and facilitating a graceful migration to bandwidth efficient packet voice e Mixed data and packet voice with drop and insert The Cisco MFT VWICS3 cards can be deployed as a T1 E1 drop and insert multiplexer with integrated DSUs CSUs reducing the complexity of the network and the cost of the central office ports by efficiently combining time division multiplexing TDM voice PBX IP voice an
17. ute increments e Onboard processor for real time facility data link FDL messaging in band code detection and insertion alarm integration and performance monitoring e Full FDL support and FDL performance monitoring according to configurable standard ANSI T1 403 or AT amp T TR 54016 DSU CSU e Selectable DSX 1 cable length in increments from 0 to 655 feet in DSU mode e Selectable DS 1 CSU line build out 0 7 5 and 15 dB 2010 Cisco and or its affiliates All rights reserved This document is Cisco Public Information Page 7 of 9 Data Sheet a LEDs e CD data carrier detect Indicates a received error on the telco link e LP loopback Indicates that the interface is in loopback mode e AL alarm Indicates an alarm condition Table 7 Network Management Features Management Feature Telnet or Console Remote and local configuration monitoring and troubleshooting from Cisco IOS Software CLI Simple Network Management Router and DSU CSU managed by single SNMP agent router DSU and CSU appear as a single network Protocol SNMP entity to user Standard MIB MIB I e Cisco Integrated DSU CSU MIB RFC 1406 T1 MIB Including Alarm Detection and Reporting SNMP Traps Generated in response to alarms Environmental e Operating temperature 0 to 40 C 32 to 104F e Storage temperature 25 to 70 C 13 to 158F e Relative humidity 5 to 85 noncondensing operating 5 to 95 non
Download Pdf Manuals
Related Search