Home

Miele G 5500 SC

Contents

1. 0 Programme lower basket Turbo Delay start Start Stop Miele omm ol o o D 0 Programmes 8 Turbo button with indicator light 2 Display 6 Intensive lower basket button with Start Stop button with indicator light Indiana 2 Delay start button with indicator light Programme selector button On Off button D This instruction book applies to several different dishwasher models The specific dishwasher models are referred to as follows Standard 80 5 cm high dishwashers integrated and 84 5 cm high dishwashers freestanding XXL 84 5 cm high dishwashers Warning and safety instructions This appliance conforms to current safety requirements Inappropriate use can however lead to personal injury and damage to property To avoid the risk of accidents and damage to the appliance please read these instructions carefully before using it for the first time They contain important information on its safety use and maintenance Keep these instructions in a safe place and pass them on to any future owner Correct application P This dishwasher is not designed for commercial use It is intended for use in domestic households and in similar working and residential environments Such as Shops Offices and showrooms and by residents in establishments such as Hostels and guest houses P It must only be used as a domestic appliance as specified in these operat
2. EN TS AS Heavily soiled items AT ZZ SS ZZ I Ses ZZ SS ZZ 3 ZZZ Ss E ES 2 LESS A V m Place large platters and dishes in the centre of the lower basket When tilted plates up to 35 cm in diameter can be accommodated Dishwashers with cutlery basket 27 Loading the dishwasher MultiComfort area The rear section of the lower basket is used for washing cups glasses plates pots and pans m The glass rack can be raised to make more room for tall items m Stem glassware e g wine glasses or champagne flutes can be leaned against the glass rack or suspended from it The height of the glass rack is adjustable a ANS m Slide the glass rack to the desired height until the catches click into place at the top 28 Hinged spikes depending on model The spikes at the front are used for washing plates soup bowls platters dessert bowls and saucers Both rows of spikes can be lowered to make more room for large items e g pots pans and dishes m Press the yellow lever downwards and then lower the spikes Loading the dishwasher Cutlery 3D cutlery tray depending on model m Arrange the cutlery in the tray as shown To make unloading much easier cutlery should be grouped in zones one for
3. Settings menu Replenish salt and rinse aid reminders If you switch to using detergent that does not contain salt or rinse aid it is important to remember to replenish the salt and rinse aid and to switch the reminders back on 21 Loading the dishwasher Note Remove coarse food residues from crockery There is no need to rinse items under running water Do not wash items soiled with ash sand wax lubricating grease or paint in the dishwasher These substances will damage the dishwasher Crockery can be loaded anywhere in the baskets but the following notes should be observed Do not place crockery and cutlery inside other pieces where they may be concealed Load the crockery so that water can access all surfaces This ensures that they get properly cleaned Make sure that all items are securely positioned Hollow items such as cups glasses pans etc must be inverted in the basket Tall narrow hollow items e g champagne glasses should be placed in the centre of the basket to ensure better water coverage 22 Wide based items should be placed at an angle so that water can run off them freely The spray arms must not be blocked by items which are too tall or hang through the baskets If in doubt test for free movement by manually rotating the spray arms Make sure that small items cannot fall through the holders in the baskets Small items e g lids should therefore
4. The dishes were not loaded correctly See notes in Loading the dishwasher The programme was not powerful enough Select a more intensive programme See Programme chart There is some stubborn soiling although most of the crockery is only lightly soiled e g with tea stains Use the Sensor wash function see Settings menu Sensor wash Not enough detergent was dispensed Use more detergent or change your detergent Items are blocking the path of the spray arms Rearrange the items so that the spray arms can rotate freely The filter combination in the base of the wash cabinet is not clean or is not correctly fitted This may cause the spray arm jets to get blocked Clean and or fit the filter combination correctly Clean the spray arm jets See Cleaning and care The non return valve is open and blocked Dirty water has flowed back into the wash cabinet The rinse aid dosage is set too high Clean the drain pump and the non return valve See Maintenance Cleaning the drain pump and non return valve Reduce the dosage see Settings menu Rinse aid Problem solving guide Dishes cutlery and glasses are not dry or are flecked White residue is visible on cutlery and crockery clouding occurs on glassware film can be wiped off Possible cause The amount of rinse aid may be insufficient or the rinse aid reservoir empty Remed
5. colour of the correct replacement cover is that of the coloured insert in the base of the plug or the colour that is embossed in words on the base of the plug as applicable to the design of plug fitted Replacement fuses should be ASTA approved to BS 1362 and have the correct rating Replacement fuses and fuse covers may be purchased from your local electrical supplier WARNING THIS APPLIANCE MUST BE EARTHED 61 Plumbing The Miele waterproof anti leak system Providing your dishwasher has been installed correctly the Miele waterproof anti leak system will protect you from water damage throughout its lifetime 62 Connection to the water supply N Water in the dishwasher must not be used as drinking water The dishwasher may be connected to a cold or hot water supply max 60 C We would only recommend connection to a hot water supply if it is economical e g a solar powered supply When connected to a hot water supply all programme stages which would otherwise be carried out with cold water will be carried out with hot water The Without heater programme if available requires a hot water supply of between 45 C minimum and 60 C maximum The higher the water intake temperature the better the cleaning and drying results The inlet hose is approx 1 5 m long A 1 5 metre long flexible metal extension hose pressure tested to 14 000 kPa 140 bar is available as an optional accessory if r
6. the display will revert to showing the programme duration You will have to enter the delay start time again The delay start time then counts down to the start time selected in minute stages At the end of the delay period the programme selected begins automatically The time left for a programme to run then shows in the display the Delay start indicator light will go out and the Start Stop indicator light will light up constantly NTo prevent children coming into contact with dishwasher detergent do not fill the detergent dispenser until just before starting the programme i e before pressing the Start Stop button and activate the safety lock Additional functions Starting a programme before the Delay start period has elapsed A programme can be started before the Delay start period has elapsed Proceed as follows m Press the Start Stop button for at least one second The Delay start indicator light will go out and the Start Stop indicator light will flash m Press the Start Stop button again The programme will begin The Start Stop indicator light will light up constantly DetergentAgent For optimum cleaning results the dishwasher automatically adjusts the programme sequence to the type of detergent being used Depending on the programme this can mean that the running time and energy consumption vary slightly Follow the detergent manufacturer s instructions on dosage The cleaning and
7. be placed in the cutlery tray or cutlery basket depending on model Some foodstuffs may contain natural dyes e g carrots tomatoes or ketchup Plastic items in the dishwasher may discolour if large quantities of these foodstuffs find their way into the appliance on the crockery The stability of plastic items is not affected by this discolouration Loading the dishwasher Items not suitable for dishwashers Wooden cutlery and crockery or items with wooden parts these may discolour and fade The glue used in these items is not dishwasher proof and wooden handles may come loose after being washed in a dishwasher Craft items antiques valuable vases and decorative glassware are also not suitable for dishwashers Plastic items which are not heat resistant the high temperatures in the dishwasher may cause them to melt or lose shape Copper brass tin and aluminium items may discolour or become matt Colours painted over a glaze may fade after a number of washes Clouding may occur on glasses after frequent washing Do not wash delicate glassware or glassware containing lead crystal in a dishwasher We recommend When purchasing new crockery and cutlery make sure they are dishwasher proof If delicate glassware is washed in the dishwasher ensure that only very low temperatures are used see programme chart or a special glass care programme is used depending on model This will reduce t
8. door front N Remove any soiling immediately If this is not done it might become impossible to remove and could cause the external surfaces to alter or discolour m Clean the front using a damp Miele microfibre E cloth or with a clean sponge and a solution of hot water and washing up liquid Then dry with a soft cloth To avoid damaging the external surfaces do not use cleaning agents containing soda ammonia acids or chlorides cleaning agents containing descaling agents abrasive cleaning agents e g powder cleaners and cream cleaners solvent based cleaning agents stainless steel cleaning agents dishwasher cleaner oven sprays glass cleaning agents hard abrasive sponges and brushes e g pot scourers melamine eraser blocks sharp metal scrapers See Optional accessories Cleaning and care Checking the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution preventing it accessing the circulation system and re entering the cabinet through the spray arms N This dishwasher must not be used without all the filters in place Collection of coarse soil may cause the filters to clog The level of soiling and time it takes before the filters need cleaning will vary depending on use The message Check filters will appear in the display after every 50 programme cycles factory default setting You ca
9. drying performance of different types of detergent can vary greatly If you only ever use combination products containing salt and rinse aid in your dishwasher you can switch the reminders off if you wish see Settings menu Replenish salt and rinse aid reminders The DetergentAgent function will not be affected by this Please make sure that if you start using dishwasher salt and rinse aid again you switch the reminders back on 39 Cleaning and care Check your dishwasher regularly approx every 4 6 months This way faults and problems can be avoided The external surfaces of the dishwasher are susceptible to scratching Contact with unsuitable cleaning agents can alter or discolour the external surfaces Cleaning the wash cabinet The wash cabinet is largely self cleaning provided that the correct amount of detergent is always used If however there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner or conditioner Cleaning the door and the door seal m Wipe the door seals regularly with a damp cloth to remove food deposits m When the dishwasher is being loaded food and drink residues may drip onto the sides of the dishwasher door These surfaces are outside the wash cabinet and are not accessed by water from the spray arms Any soiling should be wiped off these surfaces before the door is closed 40 Cleaning the
10. gre Sox m ce onte eos Kad ans lets dd dre et mares 67 RINSCOIG x e s masken E pe dE p IE qd 68 Sensor wash sprae er 68 Optimise standby 2 0 tee 68 Replenish salt and rinse aid reminders 00 0000 cece 69 Sok TE 69 PE Was year t Ee Rete ree Per saget Sed bee eee ea de 69 ER ur ua tM aed re ee a ade hdc RAE Blog asia it Me 69 BOMO amp acs tenance erre re LT 70 Goes 70 Check filters o be AE E ER Er dad aske 70 Showroom programme ooo rann 71 Factory defaults caido db ee Heo ersehen 71 To close the Settings menu 1 2 2 0 esse 71 Guide to the appliance Appliance overview E D LA PARA An 3 VILT II All Upper spray arm not visible 2 Cutlery tray depending on model 2 Upper basket 4 Middle spray arm 5 Air inlet for drying depending on model Lower spray arm Filter combination Data plate Safety lock in door grip not visible Rinse aid reservoir Dual compartment detergent dispenser 42 Salt reservoir Guide to the appliance Control panel O O I 1 Sensorwash O _____Energy save Quick wash 40 C___ Light soiling 50 C Sensor wash gentle Y O _Pots amp Pans 75 C AE i
11. in the wash The drain pump is situated under the cabinet non return valve see arrow m Scoop the water out of the cabinet m Remove all foreign objects from the using a suitable container or utensil drain pump watch out for glass or bone splinters which are particularly difficult to detect and could cause injury Turn the drain pump impeller by hand to check that there are no more obstructions You will feel a little resistance when you turn the impeller m Carefully replace the non return valve and secure it with the catch N Ensure that the catch engages correctly m Press the catch for the non return Be very careful not to damage valve inwards sensitive components when m Lift out the non return valve and cleaning the drain pump and the rinse well under running water non return valve m Remove all foreign objects from the non return valve 54 Optional accessories To make the most of your dishwasher Optional accessories for particular purposes are available from your Miele dealer from the Miele Spare Parts Department or via the Internet at www miele shop com some may be supplied as standard depending on model If you would like to you will need to order wash a Miele Cappuccinatore a Cappuccinatore insert for the upper basket wash additional items of cutlery a Cutlery basket for the lower basket wash long stemmed glassware a glass rack for the lowe
12. remain active for all programmes until the setting is changed 37 Additional functions Delay start The start time of a programme can be delayed e g to benefit from economy rates of electricity A delay start time of between 30 minutes and 24 hours can be selected The delay start time is set in 30 minute steps When using the Delay start function make sure that the detergent compartment is dry before adding detergent Wipe dry with a cloth if necessary If the compartment is wet powder detergent can become lumpy and stick to the dispenser with the result that it is not fully dispensed Do not use liquid detergent when selecting Delay start as it can run into the dishwasher before it is required m Switch the dishwasher on using the On Off button The Start Stop indicator light will flash m Select the programme required with the programme selector button m Press the Delay start button The last delay start time used will appear in the display The Delay Start indicator light will come on m Set the time required using the Delay start button If the button is kept pressed in the time will increase automatically up to 24 00 h To start at 30 minutes again press the Delay start button twice 38 m Press the Start Stop button The Start Stop indicator light will light up constantly If after you have set the delay start time you do not press the Start Stop button within a few seconds
13. the door is not opened it will switch off completely after a few minutes in Standby mode The Optimise standby function can be deactivated if wished The display and the indicator lights will not go out and the time lapse before the dishwasher switches off will increase to approx 6 hours resulting in higher energy consumption m Select the setting you want and confirm your selection with the middle button underneath the display Settings menu Replenish salt and rinse aid reminders If you only ever use combination products containing salt and rinse aid in your dishwasher you can switch both of these reminders off if you wish The DetergentAgent function will not be affected by this m Select the setting you want and confirm your selection with the middle button underneath the display If you switch to using detergent that does not contain salt or rinse aid it is important to remember to replenish the salt and rinse aid and to switch the reminders back on Soak You can use the Soak function in the programme selected for loosening very stubborn food residues from pots pans and casserole dishes It is not available for every programme If you are using powder dishwasher detergent add approx 5 g to compartment I m Select the setting you want and confirm your selection with the middle button underneath the display Once set the function will remain active for the programmes for which it is avai
14. the items so that they can be more easily accessed by water 30 Operation Detergent Only use detergents formulated for domestic dishwashers Do not use washing up liquid Active ingredients Modern detergents contain various active ingredients the most important of which are Phosphates to prevent calcification Alkalis to aid removal of dried on soiling Enzymes to break down starch and loosen protein Oxygen based bleaching agents to remove coloured stains e g tea coffee tomato sauce Most dishwasher detergents contain phosphates and are mildly alkaline with enzymes and oxygen based bleaching agents Phosphate free products are rare Types of detergent Powder and liquid gel detergents These detergents allow you to adjust the amount dispensed according to the amount of load and level of soiling Tab detergents These are suitable for most levels of soiling You can also buy combination products see Settings menu Replenish salt and rinse aid reminders In addition to detergent these products contain rinse aid and salt substitutes They are available as 3 in 1 or when they also contain other components such as glass and stainless steel protective additives and enhanced cleaning power as 5 in 1 7 in 1 All in 1 etc Refer to the manufacturer s packaging as to whether combination products are suitable for the water hardness level in your ar
15. the other side low This can be useful to help prevent water being left in deep dishes etc Ensure however that the basket can slide smoothly in and out of the cabinet It is better to adjust the basket before loading it m Pull out the upper basket Depending on the setting of the upper basket the following plate dimensions can be accommodated Dishwasher with cutlery tray see data plate for model number Upper Plate in cm pasket Upper basket Lower level basket Stan XXL dard Top 15 19 31 Middle 17 21 29 Bottom 19 23 27 Dishwasher with cutlery basket see data plate for model number To adjust the upper basket upwards m Lift the basket up until it clicks into place To adjust the upper basket downwards m Pull upwards on the levers at either side of the upper basket m Adjust the basket to the desired height and then push the levers securely back down into position 26 Upper Plate in cm Be Upper basket Lower level basket Stan XXL dard Top 20 24 31 Middle 22 26 29 Bottom 24 28 27 Loading the dishwasher Lower basket m For larger and heavier items such as plates serving platters saucepans bowls etc Glasses cups and small items such as saucers can also be placed in the lower basket Do not place thin delicate glassware in the lower basket eg lt lt SSS gt SSS WSS
16. to 0 2 KWh 2 Dishwashers with cutlery tray 3 Dishwashers with cutlery basket 59 After sales service Repairs In the event of any faults that you cannot remedy yourself please contact Your Miele dealer or the Miele Service Department see back cover for address Please note that telephone calls may be monitored and recorded to improve our service m When contacting your Dealer or the Service Department please quote the model type and number of your appliance both of which are shown on the data plate on the right hand side of the door N B A call out charge will be applied for service visits where the problem could have been resolved as described in these instructions 60 Future updates The programme update function is designed to enable a service technician to update your appliance s electronics in keeping with advances in technology Information regarding programme updates will be made known by the Miele Company as and when such developments become available For testing institutes All information required regarding comparison testing and measuring noise levels is given in the Comparison tests leaflet The latest version of this leaflet can be ordered on line from testinfo miele de m Please give your postal address as well as the model type and number of your dishwasher see data plate Electrical connection Electrical connection U K AAI electrical w
17. will work even if the appliance is switched off However the appliance must remain connected to the electricity supply P A damaged appliance could be dangerous If the dishwasher gets damaged switch it off at the mains and call your Miele Dealer or the Miele Service Department P Unauthorised repairs could result in unforeseen dangers for the user for which Miele cannot accept liability Repairs should only be undertaken by a Miele approved service technician P Faulty components must only be replaced by genuine Miele original spare parts Only when these parts are fitted can the safety standards of the appliance be guaranteed P Always disconnect the dishwasher from the electrical supply for maintenance work switch off at the wall socket and remove the plug gt If the connection cable is damaged it must be replaced with a special cable available from Miele For safety reasons this must only be fitted by the Miele Service Department or a Miele authorised service technician P In countries where there are areas which may be subject to infestation by cockroaches or other vermin pay particular attention to keeping the appliance and its surroundings in a clean condition at all times Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee Warning and safety instructions Installation gt The dishwasher must be installed and connected in compliance with th
18. 1900 Fax 27 0 11 548 1935 E mail info miele co za nternet www miele co za United Arab Emirates Miele Appliances Ltd P O Box 11 47 82 Gold amp Diamond Park Sheikh Zayed Road Building 6 Offices Nos 6 214 to 6 220 Dubai Tel 971 4 341 84 44 Fax 971 4 341 88 52 E Mail info miele ae Internet www miele ae Alteration rights reserved G5500 G5505 G5510 G5515 1410 ce M Nr 07 799 950 02
19. 4 35 6 3 63 35 36 6 5 65 36 37 50 6 7 9 0 67 89 37 50 51 60 9 2 10 8 91 108 51 60 61 70 11 0 12 6 110 126 61 70 67 Settings menu Rinse aid You can adjust the rinse aid dosage for best results The rinse aid dosage can be set from approx 0 6 ml The factory default setting is 3 ml If the function to adjust the Sensor wash programme has been activated the amount of rinse aid dispensed in the Sensor wash programme can be higher than that set If spots appear on crockery and glassware Increase the rinse aid dosage If clouding or smearing appears on crockery and glassware Decrease the rinse aid dosage m Select the rinse aid dosage you want and confirm your selection with the middle button underneath the display Sensor wash You can adjust the Sensor wash programme so that it will remove stubborn soiling from a lightly soiled load m Select the setting you want and confirm your selection with the middle button underneath the display 68 Optimise standby To save energy the dishwasher will switch to Standby mode a few minutes after the last time a button has been pressed or at the end of the programme The display and the indicator lights will go out and only the Start Stop indicator will flash slowly The dishwasher will not switch to Standby mode whilst a programme is running If the dishwasher is not switched off at the end of the programme and
20. Miele Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is en GB essential to read these instructions as well as the installation plan before it is installed and used for the first time M Nr 07 799 950 Contents Guide to the appliance 0 0 0 0 5 Appliance overview 0 iss N E E 5 Control panel omic ai ra rede ee e er ter eade etd omen 6 Warning and safety instructions 0 0 0 0 eee eee 7 Caring for the environment ooo 12 Disposal of the packing material liie 12 Disposal of your old appliance 2 0 saaa 12 Energy saving washing 0 0 0 ae 13 Before using for the first time 0 course 14 To open AM SRA COM EE eras nee a Saar Arde Nerf 14 MNOClOSS ME 10 010 TG 14 oalely loGK ace sind a eco HES a AE Wt ean ded Ge RARE PROSE yos i 14 DISplay is ede sak se ana E EE ae Aba eda bad e UR eee eee ita 15 Basic settings sas saa es ias ea E edd Es 16 LarigUage sp cape Eee OL aao ae ede DRE UTE de BUR a ose 16 V ter hardnessa 2 2 0 22 220 RE ae ba la dea 16 Before using the appliance for the first time you require o oo o o 17 Filling the salt reservoir o RR I 17 Replenish salt message ie skatt manche ihn dene ad hs 19 Rinseald exar er ira 20 Addig tinse ald audietur A PER anne 20 Replenish rinse ald message 4 sisxa xke ea neg Ae ee Ree EA AR pns 21 Loading the dishw
21. Replenish the reservoir increase the dosage or change the brand of rinse aid see Before using for the first time Rinse aid Crockery was taken out of the cabinet too soon Leave it in for longer See Operation Combination products have been used which have impaired drying performance Not enough rinse aid was used Change your detergent or replenish the rinse aid see Before using for the first time Rinse aid Increase the dosage see Settings menu Rinse aid There is no salt in the salt reservoir Fill the salt reservoir see Before using for the first time Filling the salt reservoir The salt reservoir cap has not been screwed on correctly Replace it making sure that it screws back on correctly An unsuitable combination detergent has been used Change your detergent Use a standard liquid tablet or powder detergent and fill the salt and rinse aid reservoirs in the dishwasher The water softener is programmed to a setting which is too low Select a higher water softener setting see Water softener 51 Problem solving guide Glassware has a brown or blue tinge and film cannot be wiped off Glassware is dull and discoloured film cannot be wiped off Tea or lipstick stains have not been completely removed Plastic items are discoloured There are rust stains on cutlery 52 Possible cause This may be ca
22. ad Drainage length Mains cable Capacity depending on model Standard 84 5 cm adjustable 3 5 cm 80 5 cm adjustable 6 5 cm Min 80 5 cm 6 5 cm 59 8cm 60 cm 60 cm 57cm Max 67 kg 230 V 240 V 2200 W 10A KEMA VDE radio and television suppressed 30 1000 kPa 0 3 10 bar Up to max 60 C Max 1m Max 4m approx 1 7 m 13 14 place settings XXL 84 5 cm adjustable 6 5 cm Min 84 5 cm 6 5 cm 59 8 cm 60 cm 87cm Max 59 kg 230 V 240 V 2200 W 10A KEMA VDE radio and television suppressed 30 1000 kPa 0 3 10 bar Up to max 60 C Max 1m Max 4m approx 1 7m 13 14 place settings 65 Settings menu Settings menu for changing standard settings To open the Settings menu m Switch the dishwasher off with the On Off button if it is switched on m Press and hold the Start Stop pressed in m Switch on the dishwasher with the On Off button and keep the Start Stop button pressed in for at least 4 seconds The first option of the Settings menu will appear in the display and all the indicator lights will come on See Display for more information about the display m Select the option you want to change Sub menu options which have already been set will have a tick beside them 66 Language F The display can be set to appear in one of several different languages You can select one of the lan
23. ake is lower than 30 kPa 0 3 bar Seek professional advice Problem solving guide Problem Possible cause Remedy The following fault message appears in the display mw Drain Before rectifying the problem Switch the dishwasher off using the On Off button D Water outlet is restricted water remains in the wash cabinet at the end of a programme Clean the filter combination See Cleaning and care Clean the drain pump See Maintenance Clean the non return valve See Maintenance Remove any kink in the drain hose 47 Problem solving guide General problems Problem The display is dark Detergent residue is left in the dispenser at the The detergent dispenser lid cannot be At the end ofa programme there is a film of moisture on the inside of the door and the interior walls Water remains in the wash cabinet at the end of a programme 48 Possible cause The display has switched off automatically to save energy Standby mode The dispenser was still damp when detergent was added Clogged detergent residue is blocking the catch This is caused by the drying system and does not indicate a fault Press the On Off button D This switches Standby off Make sure the dispenser is dry before adding detergent Clean the detergent from the catch The moisture will dissipate after a while Before rectifying the problem Sw
24. asher 0 0 00 22 Items not suitable for dishwashers 0 0 0 0 isle 23 Upper DaSketis PTT 24 Hinged SPIKES x det LO qoe ws ole e pa DD ce ee et 24 PUIG SONU AG Kets RR PER a er en i See ee 24 Jumbo cup rack depending on model 0 0 00 ee 25 alas Walling ue eedem EE ate eatin os Sa Re ee da 25 Adjusting the upper basket isses bead es 26 Lower baskets taitedeactedwehtranrbeadedengt eier 27 MultiComf rkared kasse ede pe pe aes dee ee qd uus 28 Hinged spikes depending on model 0 0000 c eee 28 Cement 29 3D cutlery tray depending on model 0 0 00 00 ees 29 Cutlery basket depending on model elles 30 Contents A ee bon boere end 31 Detergente narra ef net na weten Bere SOROR RU np eng dede 31 Adding delege nl ed zus sur ann ee Lae te REA SR steep dd 32 Switching ON coc 33 Selecting a programme 1 2 0 0 00 tte 33 Starting the programme 1 2 0 0 tt eee 33 Displays sea ira Be ei Re Ee ee Yad ba qs Pee cee ach 34 Stand OY aa are are he a a ae u NA 34 At the end of the programme 0 0060 rennen nen 35 SWICHINGLOH re da NG 35 Unloading the dishwasher 0 0 eee 35 interrupting a Programmes eder secedere Ea eoe re 36 Changing a programme isisusu sus use e p y ye yes 36 Additional functions 0 0 0 0 0 leis 37 Intensive lower basket ies sse pergere ce e e x ace nn 37 orc EDD 37 Delay St lle nora See dha erp a ets Ed p ids 38 DetergentAgel r
25. ating the child safety lock if your dishwasher is fitted with one Adding detergent m Press the opening catch on the detergent dispenser The flap will spring open 32 The flap is always open at the end of a programme m Add the required amount of detergent and close the flap m Make sure that the detergent packaging is properly closed after use to avoid it getting damp and becoming lumpy For information Compartment holds max 10 ml Compartment II holds max 50 ml There are markings in compartment I to assist with dispensing 20 30 The marks indicate a level of approx 20 or 30 ml when the door is open in horizontal position Operation Switching on m Make sure the spray arms are not obstructed m Close the door m Open the stopcock if it is closed m Switch the dishwasher on with the On Off button D The last programme selected will appear in the display and the appropriate indicator light will come on After a short while the estimated programme duration for the programme selected will appear in the display Selecting a programme Choose your programme according to the type of load and how dirty it is The different programmes and their uses are described in the Programme chart later on in this booklet m Select the programme required with the programme selector button The indicator light next to the selected programme will come on You can now select addi
26. e Replenish salt message may still appear in the display if the salt concentration has not yet reached the correct level If this is the case press the middle button again The replenish salt message will not appear if the dishwasher has been programmed for a water hardness level of less than 0 7 mmol l 4 d German scale After filling the salt reservoir run the Quick wash programme immedi ately without any crockery in the dishwasher and without selecting the Turbo function to remove any traces of salt from the cabinet If you only ever use combination products containing salt and rinse aid in your dishwasher you can switch the reminders off if you wish see Settings menu Replenish salt and rinse aid reminders If you switch to using detergent that does not contain salt or rinse aid it is important to remember to replenish the salt and rinse aid and to switch the reminders back on Before using for the first time Rinse aid Adding rinse aid Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase and helps crockery dry faster after it has been washed Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically inadvertently filling the rinse aid reservoir with powder or liquid detergent will always cause serious damage to the reservoir Alternatively it is possible to use m Press th
27. e diagram supplied gt The dishwasher must be correctly aligned to ensure problem free operation P In order to ensure stability built under and integrated dishwashers must only be installed under a continuous worktop which is secured to adjacent cabinetry P If you want to convert your freestanding dishwasher to a built under U model you will need to order the appropriate conversion kit If you remove the existing plinth you must replace it with a U model plinth This is necessary to avoid the risk of injury caused by protruding metal parts P The door springs must be adjusted equally on both sides They are correctly adjusted when the door remains stationary when left open at 45 It is important that the door is held in place by the springs and cannot fall open 10 Correct use P Do not use solvents in the dishwasher Danger of explosion P Do not inhale or ingest dishwasher detergent Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose mouth and throat if swallowed or inhibit breathing Consult a doctor immediate ly if detergent has been swallowed or inhaled P Avoid leaving the door open unnecessarily as you could trip over it P Do not sit or lean on the opened door This could cause the dishwasher to tip and be damaged and you could get injured P Only use detergent and rinse aid formulated for domestic dishwashers Do not us
28. e between it and an effective earthing system It is most important that this basic safety requirement is present and regularly tested and where there is any doubt the electrical system in the house should be checked by a qualified electrician The manufacturer cannot be held liable for the consequences of an inadequate earthing system e g electric shock gt Do not connect the appliance to the mains electricity supply by a multi socket unit or an extension lead These do not guarantee the required safety of the appliance e g danger of overheating Warning and safety instructions P This appliance may only be installed in mobile installations such as ships if a risk assessment of the installation has been carried out by a suitably qualified engineer gt The plastic housing of the water connection contains an electrical component The housing must not be submerged in water P There are electrical wires in the water inlet hose Never cut the water inlet hose even if it is too long P The integrated Waterproof System offers protection from water damage provided the following conditions are met The dishwasher is correctly installed and plumbed in The dishwasher is properly maintained and parts are replaced where it can be seen that this is necessary The stopcock has been turned off when the appliance is not used for a longer period of time e g during holidays The Waterproof system
29. e button on the lid of the o rinse aid reservoir in the direction of Household vinegar with a max 5 the arrow until the flap springs open acid content or Liquid citric acid with up to 10 acid content The resulting rinsing and drying quality will not however be as good as when rinse aid is used Do not use vinegar with a higher acid content e g vinegar essence containing 25 acid This would damage the dishwasher If you only ever use combination products containing rinse aid in your dishwasher you do not need to add rinse aid 20 Before using for the first time m Add rinse aid only until it is visible in the opening The rinse aid reservoir holds approx 110 ml m Close the flap firmly so that it clicks into place Otherwise water can enter the rinse aid reservoir during a programme m Wipe up any spilled rinse aid This prevents over foaming occurring during the next programme You can adjust the rinse aid dosage for best results see Settings menu Rinse aid Replenish rinse aid message message appears the reservoir contains sufficient rinse aid for 2 3 programmes only m Add rinse aid in plenty of time m Confirm by pressing the middle button underneath the display The Replenish rinse aid message will go out If you only ever use combination products containing salt and rinse aid in your dishwasher you can switch the reminders off if you wish see
30. e washing up liquid P Do not use commercial or industrial detergents as these may cause damage and there is a risk of severe chemical reaction P Do not fill the rinse aid reservoir with powder or liquid detergent This will cause serious damage to the reservoir Warning and safety instructions P Inadvertently filling the salt reservoir with powder or liquid dishwasher detergent will damage the water softener Make sure you have picked up the correct packet of dishwasher salt before filling the salt reservoir P Please only use special coarse grained dishwasher salt for reactivation as other salts may contain insoluble additives which can impair the functioning of the softener P In an appliance with a cutlery basket depending on model cutlery is cleaned and dried more efficiently if placed in the basket with the handles downwards However to avoid the risk of injury place knives and forks etc with the handles upwards P Plastic items which cannot withstand being washed in hot water such as disposable plastic containers or plastic cutlery and crockery should not be cleaned in the dishwasher The high temperatures in the dishwasher may cause them to melt or lose shape P On models with Delay start make sure that the dispenser is dry before adding detergent Wipe dry if necessary Detergent will clog if poured into a damp dispenser and may not be thoroughly dispersed Accessories P Only u
31. ea Please note that the cleaning and drying results of combination detergents can vary greatly For optimum cleaning and drying results use Miele dishwasher detergent and add Miele salt and Miele rinse aid separately See Optional accessories Dispensing m Follow the dosage recommended by the manufacturer on the packaging m Unless directed otherwise use one detergent tab or add 20 to 30 ml detergent to compartment ll depending on the level of soiling With very heavy soiling you can also add a small amount of detergent to compartment see Programme chart m Tabs may not dissolve completely when the Quick wash 40 C programme is used Failure to dispense the recommended amount of detergent may impair cleaning results 31 Operation N Avoid inhalation of powder detergents and do not ingest dishwasher detergent Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose mouth and throat if swallowed or inhibit breathing Consult a doctor immediately if detergent has been swallowed or inhaled Keep detergent and other household agents out of the reach of children at all times Keep children away from the dishwasher when the door is open There could still be detergent residues in the cabinet To avoid the danger of children coming into contact with the dishwasher detergent only add detergent just before starting the programme and close the door activ
32. ectronic appliances often contain materials which if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment They are however essential for the correct functioning of your appliance Please do not therefore dispose of it with your household waste Please dispose of it at your local community waste collection recycling centre or contact your Dealer for advice Ensure that it presents no danger to children while being stored for disposal To enable sorting by type of plastic for recycling all plastic parts of the appliance are labelled with international standard symbols Caring for the environment Energy saving washing This dishwasher is exceptionally economical in its use of water and electricity You can make the most of your appliance by following these tips m f your water supply is suitable this dishwasher can be connected to hot water for further economies If the water is heated by solar panels for example this would be energy efficient However if your water is heated by electricity we would recommend connection to cold water m For most economical dishwashing make full use of the baskets without overloading the dishwasher m Choose the programme to suit the type of crockery being washed and the degree of soiling m Select the Energy save programme for energy saving dishwashing m Follow the detergent manufacturer s recommendations on detergen
33. equired A stopcock with a 3 4 male thread must be provided on site This appliance is constructed to comply with IEC EN DIN 61770 VDE 0700 Section 600 and may be connected to a suitable supply without an extra non return valve if national regulations permit Plumbing The water pressure flow pressure at the take off point must be between NTo avoid any damage to the 30 and 1000 kPa 0 3 and 10 bar appliance the dishwasher must only If the water pressure is lower than be connected to a fully vented this the fault message Water inlet plumbing system fault will appear in the display see Problem solving guide If the water pressure is too high a pressure reducer valve must be fitted After connecting the dishwasher to the water supply check that all plumbing connections are watertight IN The inlet hose must not be shortened or damaged in any way as it contains electrical components see illustration 63 Plumbing Drainage The appliance drainage system is fitted with a non return valve which prevents dirty water from flowing back into the dishwasher via the drain hose The dishwasher is supplied with approx 1 5 m of flexible drain hose with an internal diameter of 22 mm The drain hose can be extended using a connection piece to attach a further length of hose The drainage length must not be longer than 4 m and the delivery head must not exceed 1 m f t
34. f your child has swallowed or inhaled detergent Warning and safety instructions Technical safety P Before setting up the appliance check it for any externally visible damage Under no circumstances should you use a damaged appliance A damaged appliance could be dangerous gt The dishwasher must only be plugged into the electricity supply via a suitable switched socket The electrical Socket must be easily accessible after the dishwasher is installed so that it can be disconnected from the electricity supply at any time See Electrical connection P There must be no electrical sockets behind the dishwasher Danger of overheating and fire risk if the dishwasher were to be pushed up against a plug gt The dishwasher must not be installed under a hob The high radiant temperatures which are sometimes generated by a hob could damage the dishwasher For the same reason it should not be installed next to open fires or other appliances which give off heat such as heaters etc P Do not connect the dishwasher to the mains supply until it has been fully installed and any adjustment has been made to the door springs P Before connecting the appliance check that the connection data on the data plate voltage and connected load match the mains electricity supply If in any doubt consult a qualified electrician P The electrical safety of this appliance can only be guaranteed when continuity is complet
35. ged in Remedy Insert the plug and switch on at the socket The mains fuse has tripped The mains fuse has tripped Reset or replace the fuse Minimum fuse rating see data plate Reset or replace the fuse Minimum fuse rating see data plate If the same mains fuse trips again call the Miele Service Department Problem solving guide The following fault message appears in the display E Fault FEX Possible cause There may be a technical fault Remed Before rectifying the problem Switch the dishwasher off using the On Off button After a few seconds Switch the dishwasher back on Select the programme you want Press the Start Stop button If the fault message appears again there is a technical fault Call the Service Department E Waterproof The Waterproof system has reacted Close the stopcock Call the Service Department 45 Problem solving guide Water inlet drain fault The following fault message appears in the display SZ Open stopcock zt Inlet 46 Possible cause The stopcock is closed Open the stopcock fully Before rectifying the problem Switch the dishwasher off using the On Off button Water intake is restricted Open the stopcock fully and start the programme again Clean the water inlet filter see Maintenance The water pressure at the int
36. guages displayed via the Languages P sub menu m Select the language you want and confirm your selection with the middle button underneath the display The flag after the word Language acts as a guide if a language which you do not understand has already been set If this is the case keep selecting the option which has a flag after it until you reach the Language M sub menu Settings menu Water hardness gi Value Your dishwasher is fitted with a water od mel of displayed softener which you need to programme n a to the water hardness level in your area 2 04 4 2 Your local water authority will be able 3 0 5 5 3 4 0 7 7 4 to advise you of the water hardness 5 09 9 5 level in your area 6 14 11 6 7 1 3 13 7 Where the water hardness fluctuates 8 14 14 8 e g between 6 7 9 0 mmol l 9 1 6 16 9 37 50 d German scale always 10 18 18 10 programme the dishwasher to the Ti 20 20 1 2 2 2 22 2 higher value 9 0 mmol l in this 13 23 23 13 example 14 25 25 14 15 2 7 27 15 A tick v will appear beside the water 16 ds a 16 B 17 17 hardness which has been set 18 32 32 18 19 3 4 34 19 m Select the water hardness you want 20 3 6 36 20 and confirm your selection with the 21 3 8 38 21 middle button underneath the 7 p T display 24 4 3 43 24 25 4 5 45 25 26 4 7 47 26 27 4 9 49 27 28 5 0 50 28 29 5 2 52 29 30 5 4 54 30 31 5 6 56 31 32 5 8 58 32 33 5 9 59 33 34 6 1 61 3
37. he hose is to be directly fitted to the drainage outlet on site use the hose clip supplied see installation diagram The hose can be directed to the left or the right of the appliance The on site connector for the drain hose can be adapted to different widths of hose If the connector protrudes too far into the drain hose it will need to be shortened Otherwise the drain hose may become blocked The drain hose must not be shortened Make sure that there are no kinks in the hose and that it is not squashed or stretched 64 After connecting the dishwasher to the drainage system check that all plumbing connections are watertight Venting the drainage system If the on site drain connection is situated lower than the guide path for the bottom basket rollers in the open door the drainage system must be vented Otherwise a siphoning effect during a programme can cause the appliance to empty itself of water To vent it m Open the dishwasher door fully m Pull the lower spray arm firmly upwards to remove it m Cut off the top of the vent valve in the wash cabinet Technical data Dishwasher model Height freestanding Height built in Height of building in recess Width Width of building in recess Depth Freestanding Built in Weight Voltage Connected load Fuse rating Test certificates awarded Water pressure flow rate Hot water connection Delivery he
38. he risk of clouding If in doubt wash delicate glassware by hand Please note Silverware previously cleaned with a silver polish may still be damp or spotted at the end of a programme where water has not run off smoothly It may need to be rubbed dry with a soft cloth Silver which has been in contact with foods containing sulphur can discolour These include egg yolk onions mayonnaise mustard pulses fish fish brine and marinades A Aluminium components e g grease filters must not be cleaned with caustic alkaline commercial or industrial cleaning agents These may damage the material or in extreme cases Cause a severe chemical reaction See section Adding detergent for information on suitable detergents 23 Loading the dishwasher Upper basket For safety reasons do not operate the dishwasher without the upper and lower baskets in place except when running the Tall items Bb C programme if available m Use the upper basket for small lightweight and delicate items such as cups saucers glasses dessert bowls etc Shallow pans or casserole dishes can also be placed in the upper basket m Long items such as soup ladles mixing spoons and long knives should be placed lying down across the front of the upper basket 24 Hinged spikes The rows of spikes can be lowered to make more room for larger items such as casserole dishes m P
39. hing more delicate items in the upper basket Cleaning perfomance in the lower basket is intensified in programmes where this function is available Depending on the programme this can mean that the running time varies slightly m Switch the dishwasher on with the On Off button The Start Stop indicator light will flash m Select a programme m Press the Intensive lower basket button The Intensive lower basket indicator light will come on if the function is available for the programme which has been selected m Press the Start Stop button to start the programme Once set the function will remain active for the programme selected until the setting is changed Turbo The Turbo function is used to reduce the duration of programmes in which this function is available In order to achieve optimum cleaning results consumption rates are increased when Turbo has been selected If a full programme is not yet required the Turbo function can be used in conjunction with the Quick wash programme to rinse dirty crockery using cold water only and without a drying cycle m Switch the dishwasher on with the On Off button D The Start Stop indicator light will flash m Select a programme m Press the Turbo button The Turbo indicator light will come on if the function is available for the programme which has been selected m Press the Start Stop button to start the programme Once selected the function will
40. ing instructions for cleaning domestic crockery and cutlery Any other usage is not supported by the manufacturer and could be dangerous Miele cannot be held liable for damage resulting from incorrect or improper use or operation gt This dishwasher is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they are supervised whilst using it or have been shown how to use it correctly by a person responsible for their safety Safety with children P This appliance is not a toy To avoid the risk of injury keep children well away and do not allow them to play in or around the dishwasher or to use the controls They will not understand the potential dangers posed by it They should be supervised whenever you are working in the kitchen There is also a danger that children playing might shut themselves in the dishwasher P Older children may only use the dishwasher when its operation has been clearly explained to them and they are able to use it safely recognising the dangers of misuse P Keep children away from detergents Dishwasher detergents contain irritant and corrosive ingredients which can cause burning in the mouth nose and throat if swallowed or inhibit breathing Keep children away from the dishwasher when the door is open There could still be detergent residues in the cabinet Consult a doctor immediately i
41. ins an electrical component It must not be dipped in water Recommendation If the mains water contains a large amount of insoluble substances we recommend fitting a large area filter in the connection between the stopcock and the water inlet hose threaded union This filter is available from the Miele Spares Parts dept Cleaning the filter m Disconnect the dishwasher from the mains supply Switch off at the mains socket and withdraw the plug m Close the stopcock m Unscrew the inlet hose m Carefully remove the seal m Withdraw the filter using pointed pliers and rinse clean under running water m Replace the filter and seal making sure they are sitting correctly m Reconnect the inlet hose to the stopcock making sure it goes on correctly and is not cross threaded m Turn on the stopcock gradually to test for leaks If there is a leak the inlet hose might not be on securely or it may have been screwed on at an angle Unscrew and reconnect the water inlet valve correctly 53 Maintenance Cleaning the drain pump and non return valve If the water has not been pumped away at the end of a programme the drain pump or the non return valve might be blocked They are however easy to clean m Disconnect the dishwasher from the mains supply Switch off at the mains socket and withdraw the plug m Take the filter combination out of the wash cabinet see Cleaning and Care Cleaning the filters
42. itch the dishwasher off using the On Off button The filter combination in the wash cabinet is clogged Clean the filter combination See Cleaning and care The drain pump or non return valve may be blocked Clean the drain pump or the non return valve See Maintenance The drain hose is kinked Remove any kink from the drain hose Problem solving guide Knocking noise in the wash cabinet Rattling noise in the wash cabinet Knocking noise in the water pipes Possible cause A spray arm is knocking against an item in a basket Items of crockery are insecure in the wash cabinet Interrupt the programme and rearrange the items which are obstructing the spray arm Interrupt the programme and rearrange the items of crockery A foreign object e g a cherry stone has becomed lodged in the drain pump This may be caused by the on site installation or the cross section of the piping Remove the foreign object from the drain pump see Maintenance Cleaning the drain pump and non return valve This has no influence on dishwasher function If in doubt contact a suitably qualified plumber 49 Problem solving guide Unsatisfactory washing result Problem The dishes are not clean Smearing appears on glassware and cutlery there is a bluish sheen on the surface of glassware film can be wiped off 50 Possible cause
43. knives one for forks one for spoons etc Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely The upper spray arm must not be blocked by items which are too big e g cake slices The side sections of the tray can be moved into the middle to accommodate tall items of crockery in the upper basket If spoon handles do not fit between the holders then lay them the other way round You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery such as serving spoons and ladles 29 Loading the dishwasher m Fit it onto the cutlery basket if required The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket m To avoid the risk of injury knives and forks should be placed with the handles upwards in the basket However cutlery placed handle down in the basket will come out cleaner and drier m Place small items of cultlery in the individual slots on three sides of the cutlery basket Cutlery insert for the cutlery basket m insert cutlery with the handles facing downwards and distribute them evenly along the insert Use the insert supplied for heavily soiled items of cutlery The insert separates
44. lable until the setting is changed Pre wash You can use the Pre wash function in the programme selected to remove easily loosened food residues It is not available for every programme m Select the setting you want and confirm your selection with the middle button underneath the display Once set the function will remain active for the programmes for which it is available until the setting is changed Longer drying The fan runs for longer at the end of a programme to improve the drying result The Longer drying function is not available for every programme m Select the setting you want and confirm your selection with the middle button underneath the display Once set the function will remain active for the programmes for which it is available until the setting is changed 69 Settings menu Brightness There are seven different display brightness settings m Select the brightness setting you want and confirm your selection with the middle button underneath the display Contrast There are seven different display contrast settings m Select the contrast setting you want and confirm your selection with the middle button underneath the display 70 Check filters You can adjust the interval at which the reminder to check the filters appears You can set an interval of between 30 and 60 programme cycles The Check filters message is set at the factory to appear after every 50 progra
45. last time a button has been pressed or at the end of the programme The display and the indicators lights will go out and only the Start Stop indicator will flash slowly The dishwasher will not switch to Standby mode whilst a programme is running m Press any button to switch the display and indicator lights back on again If the dishwasher is not switched off at the end of the programme and the door is not opened it will switch off completely after a few minutes in Standby mode see Settings menu Optimise standby Operation At the end of the programme Finish will appear in the display when the programme has finished You can now empty the dishwasher N To prevent the risk of steam damage to the worktop edging above the dishwasher it is advisable to leave the door closed until you are ready to unload the crockery Alternatively you can open the door fully until the crockery is cool enough to unload Do not leave the door only partially open Switching off At the end of a programme m Switch the dishwasher off using the On Off button The dishwasher will continue to use electricity until it is switched off with the On Off button D If the dishwasher is not going to be used for a longer period of time e g whilst on holiday the stopcock should be closed Unloading the dishwasher Dishes tend to break and chip more easily when they are hot Allow the dishes to cool until they are comfor
46. mme cycles m Select the interval you want and confirm with the middle button underneath the display Settings menu Showroom programme The programme is for demonstration use only Demo with sound This programme activates the pumps to demonstrate the sound of the dishwasher Switching Demo mode on m Select the option you want m Select On and confirm with the middle button underneath the display m Come out of the Settings menu m Then press the Start Stop button Demo mode will begin Switching Demo mode off Demo mode will switch off automatically when it reaches the end of the cycle Factory default If you have altered any settings from the factory default you can re set them back to the factory default settings m Select Reset to default and confirm your selection with the middle button underneath the display To close the Settings menu Use Clase to come out of the Settings menu m Select Clase and confirm your selection with the middle button underneath the display The display will then show the last programme selected and the indicator light for the programme selected will come on 71 United Kingdom Miele Co Ltd Fairacres Marcham Road Abingdon Oxon OX14 1TW Tel 0845 365 0555 Fax 0845 365 0777 Customer Contact Centre Tel 0845 365 6600 E mail info miele co uk Internet www miele co uk Australia Miele Australia Pty Ltd ABN 96 005 635 398 1 Gilbe
47. n set the interval for this message to appear to between 30 and 60 programme cycles see Settings menu Check filters m Check the filter combination m Clean it if necessary m Confirm the message with the middle button underneath the display The display will change to show the main menu Cleaning the filters m Switch the dishwasher off m Turn the handle anti clockwise to release the filter combination Lift the filter combination out of the dishwasher Remove any coarse particles and rinse the filter well under running water Use a nylon brush if necessary Make sure that when cleaning the filters no coarse soil falls into the circulation system causing a blockage 41 Cleaning and care To clean the inside of the filter the flap m Replace the filter combination so that must be opened it lies flat in the base of the wash cabinet m Press catches together in the direction of the arrows as shown and m Then turn the handle clockwise to open the filter lock the filter combination in place m Rinse all the filters under running N Take care when you are fitting Wall the filter combination that it is m Then close the flap so that the catch secured in position correctly engages Otherwise coarse soil could get into the circulation system and cause a blockage 42 Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bea
48. ork must be carried out by a suitably qualified and competent person in accordance with current local and national safety regulations BS 7671 in the UK Ensure power is not supplied to the appliance until after installation work has been carried out The appliance is supplied with a mains cable with moulded plug ready for connection to a 230 240V mains supply Please ensure the connection data quoted on the data plate match the household mains supply Connection should be made via a suitable switched socket which is easily accessible after installation For extra safety it is advisable to install a suitable residual current device RCD Contact a qualified electrician for advice Do not connect via an extension lead Extension leads do not guarantee the required safety of the appliance e g danger of overheating This appliance must not be connected to the inverter of an autonomous power supply e g a solar power system When switching the appliance on a surge in power could trigger the safety cut out mechanism This appliance must not be used with so called energy saving devices These reduce the energy supply to the appliance which could then become too warm Using such devices could alter the specification of the product Non rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained The
49. r basket Miele CareCollection Miele branded cleaning and care products including dishwasher salt detergent and rinse aid are available to order from the Miele Spare Parts Department or via the Internet at www miele shop com 55 Programme chart Crockery Food deposits Action required This needs an Mixed All normal adaptable programme everyday crockery gt food deposits gt Ar Shorter duration Heat sensitive glasses This needs a short and plastic gt gt programme Fresh easily removed oe Gives This needs a gentle gt gt programme with glass care Mixed crockery This needs a standard gt gt programme Normal food deposits which have begun Shorter duration to dry on gt gt To save water and energy Pots pans everyday porcelain and cutlery Burnt on stubborn This needs a powerful gt dried on food gt programme deposits containing starch or protein Shorter duration All types Food deposits with a gt This needs rinsing before of crockery strong smell running a programme 1 Food such as potatoes pasta rice or casseroles can leave starchy deposits Deposits containing protein can be left by food such as fried meat fish or eggs and bakes 56 Programme chart Programme Detergent Compartment 19 Compartment II gt see Detergent gt In some cases tabs may not dissolve completely 57 Programme cha
50. ress the yellow lever downwards and then lower the spikes Hinged cup rack m To make room for tall items raise the rack upwards Glasses can be arranged along the cup rack to give them some support during the programme m Lower the cup rack and lean the glasses against it Loading the dishwasher Jumbo cup rack depending on model The cup rack can be set at two different widths so that it can also accommodate large cups m Pull the cup rack upwards and click it back into position at the required width Glass rail This rail is designed to hold tall glasses and glasses with stems securely Y le EA All SUE y m Lower the rail and lean tall glasses against it m You can also move one of the side inserts of the cutlery tray to make more room for tall glasses Adjusting the height You can set the glass rail at two different heights m Pull the rail upwards and click it back into position at the required height Use the low setting for small glasses and tumblers Use the high setting for tall glasses and glasses with stems 25 Loading the dishwasher Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower or upper basket the upper basket can be adjusted on three levels with 2 cm between each level The upper basket can also be set at an angle with one side high and
51. rings The spray arms should therefore be inspected and cleaned regularly approx every 4 6 months m Switch the dishwasher off Remove the spray arms as follows m Take out the cutlery tray if your dishwasher is fitted with one m Push the top spray arm upwards to engage the inner ratchet Then unscrew the spray arm m Push the middle spray arm upwards to engage the ratchet Then unscrew the spray arm m Remove the lower basket m Pull the lower spray arm firmly upwards to remove it m Use a pointed object to push food particles into the spray arm jets m Rinse thoroughly under running water m Replace the spray arms and check that they rotate freely 43 Problem solving guide With the help of the following guide minor faults in the performance of the appliance some of which may result from incorrect operation can be put right without contacting the Service Department Repairs should only be carried out by a suitably qualified and trained person in strict accordance with current local and national safety regulations Unauthorised or incorrect repairs could cause personal injury or damage to the appliance Technical problems Problem The display remains dark and the Start Stop indicator light is not flashing after the dishwasher has been switched on with the On Off button The dishwasher stops during a programme 44 Possible cause The appliance is not plug
52. rt Programme Programme sequence Pre wash Main wash SG Interim rinse 1 Final rinse mG Drying Sensor wash Variable programme sequence sensor controlled adjustment according to the amount of crockery and level of food deposits If required 45 65 If required 68 Quick wash 40 C 40 X 45 Sensor wash Variable programme sequence with glass care gentle Y sensor controlled adjustment according to the amount of crockery and level of food deposits If required 40 48 If required 55 x Energy save 45 60 x Light soiling 50 C 50 68 x Pots amp pans 75 C x 75 68 x 58 Programme chart Consumption 1 Duration Electricity Water Cold Hot Litres Cold Hot water water water water connection connection connection connection 15 C 55 C 15 6 55 C kWh kWh h min h min 0 95 1 35 0 70 1 00 10 17 1 36 2 38 1 23 2 21 0 60 0 25 10 0 38 0 27 0 70 0 95 0 40 0 50 10 17 1 26 2 02 1 17 1 43 0 952 0 949 0 602 0 59 9 10 2 52 2 43 1 20 0 90 10 1 42 1 33 1 55 1 15 13 2 40 2 29 1 Values quoted are in accordance with EN 50242 The durations given will vary depending on individual conditions and on data recorded by the sensors Selecting the Turbo function depending on model can reduce the programme duration by up to 50 minutes with an increase in electricity consumption of up
53. rt Park Drive Knoxfield VIC 3180 Tel 03 9764 7130 Fax 03 9764 7149 Internet www miele com au China Miele Shanghai Suite 4105 06 Plaza 66 1266 Nanjing Road West Jing An District Shanghai 200040 PRC Tel 86 21 6288 4200 Fax 86 21 6288 4100 E mail mieleshanghai cn miele com Internet www miele cn Miele Hong Kong Limited 41 F 4101 Manhattan Place 23 Wang Tai Road Kowloon Bay Hong Kong Tel 852 2610 1331 Fax 852 2610 1013 Email mielehk miele com hk India Miele India Pvt Ltd Ground Floor Copia Corporate Suites Plot No 9 Jasola New Delhi 110025 Tel 011 46 900 000 Fax 011 46 900 001 E mail customercare miele in Internet www miele in Germany Miele amp Cie KG Carl Miele StraBe 29 33332 Gutersloh Ireland Miele Ireland Ltd 2024 Bianconi Avenue Citywest Business Campus Dublin 24 Tel 01 461 07 10 Fax 01 461 07 97 E Mail info miele ie Internet www miele ie New Zealand Miele New Zealand Limited Unit L 10 20 Sylvia Park Road Mt Wellington 1060 Auckland NZ Tel 0800 264 353 Fax 0800 463 453 Internet www miele co nz Singapore Miele Southeast Asia Miele Pte Ltd 163 Penang Road 04 02 03 Winsland House Il Singapore 238463 Tel 65 6735 1191 Fax 65 6735 1161 E Mail infosea miele com sg nternet www miele sg South Africa Miele Pty Ltd 63 Peter Place Bryanston 2194 P O Box 69434 Bryanston 2021 Tel 27 0 11 548
54. s ac dug ede ated kes eee eae RO re 39 Cleaning and care 0 00 40 Cleaning the wash cabinet 0 0000 eect tee 40 Cleaning the door and the door seal ess 40 Cleaning the door front zs res sz eger ka newness deena dae heed bes 40 Checking the filters in the wash cabinet 0000 cee nenn 41 Cleaning the filters 6 eee 41 Cleaning the sprayarms n nennen narr nen 43 Problem solving guide 0 0 seen 44 Techniealproblems usati gura Eee abate Bee a t hehe 44 Water inlet drain fault 2 0 0 0 000 00 0c e 46 Genetalproblems see curia oktett F9 ae ae 48 NOISES EEE SEE EEE RE EE EE be 49 Unsatisfactory washing result 50 Maintenance 53 Cleaning the water inlet filler 2 0 0 0 eee 53 Cleaning the drain pump and non return valve n osaansa ee 54 Optional accessories 55 Programme Chart ooo occ 56 Contents After sales service olii il es 60 ai pe c 60 Faure UBAATES xu catus er O aie EISE Eee 60 Or testing S ILU OS san aa or sara ane me u OR RD 60 Electrical connection 0 00000 61 Plumbing 4p ded arriero hd et x eta 62 The Miele waterproof anti leak system 0 0 0 0 0000 eee 62 Connection to the water supply s s sssaaa 62 BIE ne SY PRETI 64 Technical data 65 Settings Menu o occ 66 To open the Settings Menu 1 2 eee 66 Elle Ve JRR DEE 66 Water Bardmessa s acce
55. se genuine Miele original spare parts and accessories with this appliance If spare parts or accessories from other manufacturers are used this will invalidate the guarantee and Miele cannot accept liability Disposal of your old dishwasher P Make the door lock inoperative so that children cannot accidentally shut themselves in Make appropriate arrangements for the disposal of the appliance The manufacturer cannot be held liable for damage caused by non compliance with these Warning and Safety instructions Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled Ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of babies and young children Danger of suffocation The packaging consists of the following materials Outer packaging Corrugated cardboard made from up to 100 recyclable material or Polyethylene PE shrink wrap Polyproplylene PP strapping Inner packaging Chlorine and fluorine free expanded polystyrene EPS Base lid frame and support battens made from untreated natural wood from renewable forests Polyethylene PE protective wrap Rather than just throwing these materials away please ensure they are recycled 12 Disposal of your old appliance Electrical and el
56. sed to select and switch to Standby mode a few confirm Setting options minutes after the last time a button has been pressed The display and indicator lights will go out and only the Start Stop indicator will flash slowly Press any button to switch the display and indicator lights back on again The middle button underneath the display is used to confirm a message or setting and also to move to the next menu or to another menu level y A tick will appear beside the option which is currently selected The arrows on the left and right of the display indicate further options You can use the button underneath the display on the left or right as appropriate to select these further options Before using for the first time Basic settings m Switch the dishwasher on with the On Off button If the dishwasher is being switched on for the first time the welcome screen will appear Language The display will then change automatically to the screen for setting the language See Display for more information about the display m Select the language you want and confirm your selection with the middle button underneath the display A tick will appear next to the language that has been set Water hardness The display will then change to the screen for setting the water hardness The dishwasher must be programmed for the water hardness in your area Your local water authority
57. shwasher salt before filling the salt reservoir Only use special coarse grained dishwasher salt for reactivation as other salts may contain insoluble additives which can impair the functioning of the water softener 18 m Remove the lower basket and unscrew the salt reservoir cap Water or saline solution will run out of the reservoir when the cap is removed It should therefore only be removed in order to refill the salt reservoir m Fill the reservoir with approx 2 litres of water first use only m Place the funnel provided over the salt reservoir and carefully fill with salt until the reservoir is full The salt reservoir holds approx 2 kg of salt depending on the brand used As the salt reservoir is filled displaced water will overflow Clean any excess salt from around the reservoir opening and then screw the cap on again firmly Run the Quick wash programme im mediately without any crockery in the dishwasher and without selecting the Turbo function to remove any traces of salt from the cabinet Before using for the first time Replenish salt message m Fill the salt reservoir with dishwasher salt for reactivation when the S Replenish salt message appears If it appears during a programme wait until the end of the programme m Confirm by pressing the middle button underneath the display The Replenish salt message will go out After the salt reservoir has been filled th
58. t It is not an indication that it has been used previously Filling the salt reservoir In order to achieve good cleaning results the dishwasher needs to operate with soft water Hard water results in the build up of calcium deposits on crockery and in the dishwasher Mains water with a hardness level higher than 0 7 mmol l 4 d German scale needs to be softened This takes place automatically in the integrated water softener The water softener in this dishwasher is suitable for a water hardness level of up to 12 6 mmol l 70 d German scale The water softener requires dishwasher salt Depending on the water hardness level x 3 8 mmol l or 21 d German scale dishwasher salt is not required if combination tablets are being used see Detergent If the water in your area is very soft and constantly lower than 0 7 mmol l 4 d German scale you do not need to add dishwasher salt The Replenish salt message will be deactivated automatically Before using for the first time Important Before filling the salt reservoir with dishwasher salt for the first time you must fill it with approx 2 litres of water to enable the salt to dissolve Once the dishwasher has been used there is always sufficient water in the reservoir ZN inadvertently filling the salt reservoir with powder or liquid dishwasher detergent will damage the water softener Make sure you have picked up the correct packet of di
59. t dosage m When using powder or liquid detergent you can use less detergent if baskets are only half full Before using for the first time To open the door Safety lock m Reach under the handle and pull the Use the safety lock to prevent children door open opening the dishwasher door If the door is opened during operation m To lock the door push the slide all functions are automatically underneath the door grip to the right interrupted m Tounlock the door push the slide to the left To close the door m Push the baskets right in m Then raise the door up and push until it clicks into position 14 Before using for the first time Display General The display is used to select or set the aan intensivo Turno gara following E cs ints e A d the programme EN dicens OK e MT extras the delay start time Settings menu senge The Settings menu is used to alter the During a programme the display dishwasher s electronics to suit shows the following different requirements You access the settings menu by pressing a specific button combination See Settings menu for more details the stage the programme is at the estimated time left for the programme to run any relevant fault messages and In the Settings menu the normal notes functions of the buttons underneath the display are switched off so that these To save energy the dishwasher will buttons can be u
60. table enough to handle before unloading them If you open the door fully after switching off the dishes will cool much faster First unload the lower basket then the upper basket and finally the cutlery tray depending on model This will prevent water drops from the upper basket and cutlery tray from falling onto the dishes in the lower basket 35 Operation Interrupting a programme A programme is interrupted as soon as the door is opened If the door is closed again the programme will continue from the point it was at before the door was opened N Water in the dishwasher may be hot Danger of scalding Only open the door if absolutely necessary and exercise extreme caution when doing so Before closing the door again leave it ajar for approx 20 seconds This will enable the temperature in the wash cabinet to settle Then close the door firmly making sure that it clicks into place 36 Changing a programme If the detergent dispenser flap has already opened do not change the programme If a programme has already started and you wish to change it proceed as follows m Press and hold the Start Stop button pressed in for at least one second The programme will be cancelled m Select the programme you want and then start it Additional functions Intensive lower basket The Intensive lower basket additional function allows you to wash heavily soiled items in the lower basket while was
61. tional functions see Additional functions Starting the programme m Press the Start Stop button The programme will begin If any additional functions are selected the appropriate indicators will also light up A programme can only be cancelled in the first few minutes Otherwise the programme must continue to the end so that important programme stages e g reactivating the water softener are not omitted 33 Operation Display The duration of the programme selected appears in hours and minutes in the display before the programme begins During the programme the time left until the end of the programme is displayed Symbols appear to indicate which stage the programme is at HS Pre wash Soak ii Main wash ii Interim rinse Final rinse Drying Finish The time displayed may vary with the same programme This can be due among other factors to the water temperature at each intake the reactivation process the type of detergent the amount of crockery and how dirty it is When a programme is selected for the first time the display shows an average time for a cold water intake The times shown in the Programme chart refer to standard test loads and temperatures Each time a programme is run the electronic unit takes the new conditions into account and calculates the time required 34 Standby To save energy the dishwasher will switch to Standby mode a few minutes after the
62. used by the detergent The glasses are not dishwasher proof The surfaces are affected The wash temperature of the selected programme was too low Remed Change your detergent There is no remedy Purchase glassware which is dishwasher proof Select a programme with a higher wash temperature The bleaching effect of the detergent used is too low Natural dyes e g from carrots tomatoes or ketchup may be the cause The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes The affected items are not corrosion resistant Change your detergent Use more detergent see Operation Detergent Discolouration is irreversi ble There is no remedy Purchase cutlery which is dishwasher proof A programme was not run after dishwasher salt was added Traces of salt have got into the wash cycle Always run the Quick wash programme without any crockery in the dishwasher and without selecting the Turbo function after adding dishwasher salt The salt reservoir cap has not been screwed on correctly Replace it making sure that it screws back on correctly Maintenance Cleaning the water inlet filter A filter is incorporated in the screw connection of the valve on the water inlet hose The filter must be cleaned when dirty otherwise insufficient water flows into the wash cabinet The plastic housing of the water connection conta
63. will be able to advise you of the water hardness level in your area Where the water hardness fluctuates e g between 6 7 9 0 mmol l 37 50 d German scale always programme the dishwasher to the higher value 9 0 mmol l in this example 16 In the event of a fault it will help the service technician if you know the hardness of your local water supply Enter the water hardness below mmol l or d The dishwasher is programmed at the factory for a water hardness level of 2 7 mmol l 15 d German scale m Select the water hardness you want and confirm your selection with the middle button underneath the display See Settings Water hardness for further information Finally two messages will appear in the display After confirming these the prompts 1 Replenish rinse aid and X Replenish salt may also appear Press any button to confirm these The display will change to show the main menu These basic settings will be saved in memory after the dishwasher has been through one complete programme Before using for the first time Before using the appliance for the first time you require approx 2 litres of water approx 2 kg dishwasher salt domestic dishwasher detergent rinse aid formulated for domestic dishwashers See Optional accessories Every dishwasher is tested at the factory There will be residual water in the appliance from this tes

Download Pdf Manuals

Related Search

Related Contents

  XMAP3 実行ガイド - ドキュメント（ITプラットフォーム）  Publicação nº OM99F14b PN 01998-98200 Impresso no  ALTERNATES  Conair BE47X makeup mirror  Tandberg Data N3 User's Manual  Operating and service manual  SIMATIC Programmazione con STEP 7 Lite V3.0  SIMATIC Rack PC 547B - Services  Embedded Linux 2.6 User Manual 1Copyright  

Copyright © All rights reserved.

• https://telegra.ph/Calculate-Wire-Resistor-from-Voltage-Drop-e5191df4-11-16
• https://telegra.ph/Calculat-Wire-Area-From-Voltage-Drop-9ccfeea3-11-16
• https://telegra.ph/Calculate-Wire-Resistor-from-Voltage-Drop-123b4243-11-16
• https://telegra.ph/Wall-Concrete-Volume-Calculator-b89818b4-11-13
• https://telegra.ph/Concrete-Volume-Calculator-for-Curbs-Gutters-96af8964-11-13
• https://telegra.ph/Wall-Concrete-Volume-Calculator-e966a484-11-13
• https://telegra.ph/rebar-weight-calculator-cee468c4-11-07
• https://telegra.ph/AC-Three-phase-Voltage-Drop-Calculator-8c0fc0a7-11-18
• https://telegra.ph/Calculate-Current-from-Voltage-Drop-849f7b31-11-18
• https://telegra.ph/Calculate-Current-from-Voltage-Drop-e32fef01-11-18