IMC Networks Giga-MiniMc
Contents
1. Warranty IMC Networks warrants to the original end user purchaser that this product EXCLUSIVE OF SOFTWARE shall be free from defects in materials and workmanship under normal and proper use in accordance with IMC Networks instructions and directions for a period of six 6 years after the original date of purchase This warranty is subject to the limitations set forth below At its option IMC Networks will repair or replace at no charge the product which proves to be defective within such warranty period This limited warranty shall not apply if the IMC Networks product has been damaged by unreasonable use accident negligence service or modification by anyone other than an authorized IMC Networks Service Technician or by any other causes unrelated to defective materials or workmanship Any replaced or repaired products or parts carry a ninety 90 day warranty or the remainder of the initial warranty period whichever is longer To receive in warranty service the defective product must be received at IMC Networks no later than the end of the warranty period The product must be accompanied by proof of purchase satisfactory to IMC Networks denoting product serial number and purchase date a written description of the defect and a Return Merchandise Authorization RMA number issued by IMC Networks No products will be accepted by IMC Networks which do not have an RMA umber For an RMA number contact IMC Networks at PHONE 800 624 1070 in t2. ERY ARM Networks Giga MiniMc TX FX Giga MiniMc TX SFP Operation Manual FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense Any changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment The use of non shielded I O cables may not guarantee compliance with FCC RFI limits This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of Communications Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de classe A prescrites dans le Reglement sur le brouillage radio lectrique publi par le ministere des Communications du Canada
3. PARTICULAR PURPOSE ARE HEREBY LIMITED TO THE DURATION OF THE EXPRESS WARRANTY STATED ABOVE Every reasonable effort has been made to ensure that IMC Networks product manuals and promotional materials accurately describe IMC Networks product specifications and capabilities at the time of publication However because of ongoing improvements and updating of IMC Networks products IMC Networks cannot guarantee the accuracy of printed materials after the date of publication and disclaims liability for changes errors or omissions Table of Contents FCC Radio Frequency Interference Statement censenenessensenneenennnnnennn VAL Lo 0 POPE ER EP E E E er I ADOBE NE GIE MIINE A aaa 1 Installime the Giga MINIMO rt iaa 1 Powering tne Giea MiniMe uses 1 BEL ODE ION Sees 1 IME Network Tecnica Suppor anesini eier 2 SPECICATION sraa E O area treme 2 Fiber Optie Cleanine Guidelines nn tidad didas 3 Electrostatic Discharge Precautions uuescivs asirio cacicisoo gio 3 A EEE 4 About the Giga MiniMc Unless noted otherwise all reference to the Giga MiniMc in this manual are also applicable to the Giga MiniMc TX SFP The Giga MiniMc is a 10 100 1000 Auto Negotiating switching miniature media converter The fiber port available in one pair of SC fiber connectors and or an SFP port which can support any fiber type dual strand available in LC connectors and single strand fiber SFPs available in SC connectors The Giga MiniMc always opera
4. dle these components directly unless you are a qualified service technician and use tools and techniques that conform to accepted industry practices Safety Certifications UL CUL Listed to Safety of Information Technology Equipment including Electrical Business Equipment CE The products described herein comply with the Council Directive on Electromagnetic Compatibility 2004 108 EC and the Council Directive on Electrical Equipment Designed for use within Certain Voltage Limits 2006 95 EC Certified to Safety of Information Technology Equipment Including Electrical Business Equipment For further details contact IMC Networks LISTED 5M80 ITE E156766 C Class 1 Laser product Luokan 1 Laserlaite Laser Klasse 1 Appareil A Laser de Classe 1 European Directive 2002 96 EC WEEE requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste This symbol indicates that the equipment should be disposed of separately from regular household waste It is the consumer s responsibility to dispose of this and all equipment so marked through designated collection facilities appointed by government or local authorities Following these steps through proper disposal and recycling will help prevent potential negative consequences to the environment and human health For more detailed information about proper disposal please contact local authorities waste disposal se
5. he U S and Canada or 949 465 3000 or FAX 949 465 3020 The end user shall return the defective product to IMC Networks freight customs and handling charges prepaid End user agrees to accept all liability for loss of or damages to the returned product during shipment IMC Networks shall repair or replace the returned product at its option and return the repaired or new product to the end user freight prepaid via method to be determined by IMC Networks IMC Networks shall not be liable for any costs of procurement of substitute goods loss of profits or any incidental consequential and or special damages of any kind resulting from a breach of any applicable express or implied warranty breach of any obligation arising from breach of warranty or otherwise with respect to the manufacture and sale of any IMC Networks product whether or not IMC Networks has been advised of the possibility of such loss or damage EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE IMC NETWORKS MAKES NO OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED WITH RESPECT TO THIS IMC NETWORKS PRODUCT INCLUDING WITHOUT LIMITATION ANY SOFTWARE ASSOCIATED OR INCLUDED IMC NETWORKS SHALL DISREGARD AND NOT BE BOUND BY ANY REPRESENTATIONS OR WARRANTIES MADE BY ANY OTHER PERSON INCLUDING EMPLOYEES DISTRIBUTORS RESELLERS OR DEALERS OF IMC NETWORKS WHICH ARE INCONSISTENT WITH THE WARRANTY SET FORTH ABOVE ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A
6. n the copper port IMC Networks Technical Support Tel 949 465 3000 or 800 624 1070 in the U S and Canada 32 16 550860 Europe Fax 949 465 3020 E Mail techsupport imcnetworks com Web www imcnetworks com Specifications Ethernet Connections Fixed Fiber Port 10 100 1000 BaseT Auto Negotiation Auto Cross Flow Control 1 536 MTU Full Line Rate Forwarding Ethernet Connections SFP Fiber Port 10 100 1000 BaseT Auto Negotiation Auto Cross Flow Control 10 240 MTU Full Line Rate Forwarding AC Wall Adapter 100 to 240 10 VAC input 5 VDC output 2A max Operating Temperature 32 F to 122 F 0 C to 50 C Storage Temperature 31 F to 167 F 35 C to 75 C Humidity 5 to 95 non condensing 0 to 10 000 ft altitude Dimensions 0 83 H x 1 80 W x 3 35 D 2 11 x 4 57 x 8 51 cm SFP has a 1 year warranty Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust which can obstruct the optic path and cause performance degradation Good system performance requires clean optics and connector ferrules 1 Use fiber patch cords or connectors if you terminate your own fiber only from a reputable supplier low quality components can cause many hard to diagnose problems in an installation 2 Dust caps are installed at IMC Networks to ensure factory clean optical devices These protective caps sh
7. ould not be removed until the moment of connecting the fiber cable to the device Should it be necessary to disconnect the fiber device reinstall the protective dust caps 3 Store spare caps in a dust free environment such as a sealed plastic bag or box so that when reinstalled they do not introduce any contamination to the optics 4 If you suspect that the optics have been contaminated alternate between blasting with clean dry compressed air and flushing with methanol to remove particles of dirt Electrostatic Discharge Precautions Electrostatic discharge ESD can cause damage to any product add in modules or stand alone units containing electronic components Always observe the following precautions when installing or handling these kinds of products 1 Do not remove unit from its protective packaging until ready to install 2 Wear an ESD wrist grounding strap before handling any module or component If the wrist strap is not available maintain grounded contact with the system unit throughout any procedure requiring ESD protection 3 Hold the units by the edges do not touch the electronic components or gold connectors 4 After removal always place the boards on a grounded static free surface ESD pad or in a proper ESD bag Do not slide the modules or stand alone units over any surface WARNING Integrated circuits and fiber optic components are extremely susceptible to electrostatic discharge damage Do not han
8. rvices or the point of purchase for this equipment HA AS LEN Networks 19772 Pauling Foothill Ranch CA 92610 2611 USA TEL 949 465 3000 FAX 949 465 3020 www imcnetworks com ISO 9001 2008 f Made in REGISTERED RoHS 2011 IMC Networks All rights reserved The information in this document is subject to change without notice IMC Networks assumes no responsibility for any errors that may appear in this document Giga MiniMc SFP is a trademark of IMC Networks Other brands or product names may be trademarks and are the property of their respective companies Document Number 56 80630 00 B1 February 2011
9. tes at 1000 Mbps FDX the copper port Auto Negotiates the connected device s speed and duplex mode 10 Mbps 100 Mbps or 1000 Mbps and HDX or FDX including Flow Control The Giga MiniMc TX SFP requires a Gigabit SFP with or without DDMI sold separately through IMC Networks SFPs must be MSA compliant and meet the Class 1 Laser Safety Standard The Giga MiniMc offers plug and play operation including the AutoCross feature which automatically selects between a crossover work station or pass through connection depending on the connected device SFP s have a 1 year warranty Installing the Giga MiniMc The Giga MiniMc installs in an IMC Networks PowerTray 18 or can be used as a standalone media converter As a standalone the Giga MiniMc SFP uses a universal external switching power cube with 100 240 10 VAC input and 5 VDC output Powering the Giga MiniMc The Giga MiniMc includes multiple powering options e A country specific high reliability AC power adapter included e lE PowerTray 18 for Rack Mounting LED Operation Each Giga MiniMc includes two LEDs located on the RJ 45 connector FX TX LED functions are as follows above illustration is representative 1 FX LNK ACT Glows green when a link is established on the fiber port blinks green when activity is detected on the fiber port TX LNK ACT Glows amber when a link is established on the copper port blinks amber when activity is detected o
Download Pdf Manuals
Related Search