LSI MegaRAID Remote Battery Kit Remote Battery Kit for LSIiBBU06
Contents
1. LSI Corporation All other brand and product names may be trademarks of their respective companies LSI Corporation reserves the right to make changes to any products and services herein at any time without notice LSI does not assume any responsibility or liability arising out of the application or use of any product or service described herein except as expressly agreed to in writing by LSI nor does the purchase lease or use of a product or service from LSI convey a license under any patent rights copyrights trademark rights or any other of the intellectual property rights of LSI or of third parties Copyright 2010 by LSI Corporation All rights reserved October 2010 Appendix Ordering Part Numbers LSI Part Numbers Model Name Description Battery A LSI00160 or LSI0061 Backup Unit BBU06 BBU007 Remote Battery Mounting Kit Remote Battery Mounting Kit LSI00260 Bracket kit for BBU BBU BRACKET 04 Remote Mount Bracket au 0 2 rset2. LS100160 LS100161 Battery Backup Remote Battery Mounting Application Note Standard BBU Mounting Provisions The BBU06 and BBUO07 Battery Backup Options consist of a BBU Control Module which is a small daughter PC board assembly and a Battery Pack assembly The BBU control module included in these accessory kits can be mounted directly on LSI 3Gb s and 6Gb s RAID Controllers respectively in four and eight port configurations You can mount these accessories off the controller remote as well to reduce airflow constraints in dense systems For 16i and 24i controllers it is required to use the remote mount option LSI00260 described below All LSI 6Gb SATA SAS products use the same BBU Control Module and Battery Pack model BBU07 The BBU Control Module can be mounted on the 6Gb s RAID Controller 4 and 8 port models only but it is possible to remotely mount the Battery Pack as well The BBU Control Module is electrically connected via a 20 pin connector and held in place with standoffs and screws The Battery Pack is snapped in place and retained by two latches that engage slots on the BBU control module and is electrically connected to the daughter board by a pigtail with a 5 pin connector Alternate Locations for Battery Pack The battery pack can be attached onto a Battery Mounting PCB BBU BRACKET 04 that is secured to the back of the enclosure by a standard PC mounting bracket The card is mounted on a Full Height mounting bracket and
3. an optional Low Profile bracket is also included as part of the kit Both brackets are vented to allow maximum cooling air flow in the vicinity of the battery The remote mounted BBU connects to the RAID controller using an extension cable kit LSI00260 that supports locations up to 12 from the controller The BBU BRACKET 04 also includes a cable but it is not used with these BBU versions and should be discarded Installation for Remote Mount kit Step 1 Step 2 Attach 20 pin extension cable included in the LS100260 kit to Attach 5 pin cable from Battery to BBU control module BBU control module Step3 Using the 3 screws provided with BBUO7 or BBU06 kit mount the BBU control module to the BBU BRACKET 04 using the holes shown below Insert the screws loosely into the standoffs for all 3 locations once the screws are in place you can then tighten all screws snugly to firmly mount the BBU module to the Bracket Step4 Mount the Battery to the BBU control module using the clips ES Y Oz Step5 Mount the complete BBU assembly into an available PCI slot on the server and attach the other end of the 20 pin cable to the RAID controller Parts shown needed for Remote Mount kit BBU07 or BBU06 with LSI00260 and BBU BRACKET 04 For more information and sales office locations please visit the LSI web sites at Isi com Isi com channel LSI LSI and Design logo are trademarks or registered trademarks of
Download Pdf Manuals
Related Search