Philips 2.1 Home theater HTS5220
Contents
1. On iPod enable the TV ON setting On iPhone select the TV Out option 1 Dock your iPod or iPhone see Dock your iPod or iPhone on page 18 2 Switch the TV to the AV VIDEO source corresponding to the yellow composite cable TheTV screen goes blank 3 Browse on the iPod or iPhone screen to select videos or photos 4 Press Play to play the video and photos The picture is displayed on the TV Use Philips EasyLink The home theater supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note Philips does not guarantee 100 interoperability with all HDMI CEC devices Switch on the HDMI CEC operations on the TV and other connected devices See the manual of the TV or other devices for details Press f amp Home Select Setup then press OK Select EasyLink gt EasyLink then press OK Select On then press OK You can now enjoy the following Philips EasyLink controls ou AWN One touch play When you play a disc the TV automatically switches to the correct channel One touch standby When you press and hold Standby on the remote control the home theater and all the connected HDMI CEC devices if they support one touch standby switch to standby mode simultaneously System Audio Control2. Risk of contamination Do not mix batteries old and new or carbon and alkaline etc e Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed of properly Product care Do not insert any objects other than discs into the disc compartment Do not insert warped or cracked discs into the disc compartment e Remove discs from the disc compartment if you are not using the product for an extended period of time Only use microfiber cloth to clean the product Disposal of your old product and batteries 8 Your product is designed and manufactured with high quality materials and components which can be recycled and reused Dx hen this crossed out wheeled bin symbol is ached to a product it means that the product is covered by the European Directive 2002 96 Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules
3. Speakers e full range satellite Speaker impedance 6 ohm Speaker drivers 1 x 76 mm 3 woofer 25 mm 1 tweeter e Frequency response 150 Hz 20 kHz Dimension WxHxD 114 x 316 x 114 mm e Weight 1 03 kg Cablelength 2m Laser Specification e Laser Type Diode InGaN AIGaN BD InGaAIP DVD A IGaAs CD Wave length 405 5nm 5nm BD 650 13nm 10nm DVD 790 15nm 15nm CD Output power Max ratings 20mW BD 7mW DVD CD 9 Troubleshooting VN Warning Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself f you have problems using this product check the following points before you request service If you still have a problem register your product and get support at www philips com welcome f you contact Philips you will be asked for the model and serial number of your product The model number and serial number are on the back or bottom of your product Write the numbers here odel No Serial No Main unit The buttons on this home theater do not work Disconnect the home theater from the power outlet for a few minutes then reconnect Picture No picture Ensure that the TV is switched to the correct source for the home theater No picture on HDMI connection Change the HDMI video setting or wait for 15 seconds for auto recover Ch
4. Amplifier Total output power 400W RMS 24 EN Frequency response 20 Hz 20 kHz 3dB Signal to noise ratio gt 65 dB CCIR A weighted Input sensitivity e 1000 mV P3 550 mV Video Signal system PAL NTSC Component video output 4801 5761 480p 576p 720p 10801 HDMI output 480i 576i 480p 576p 720p 10801 1080p 1080p24 Audio S PDIF Digital audio input Coaxial IEC 60958 3 Sampling frequency 32 kHz 44 1 kHz 48 kHz e WMA 444 kHz 48 kHz Constant bit rate e MP3 112 kbps 320 kbps e WMA 48 kbps 192 kbps Radio Tuning range Pacific Latin America FM 87 5 108 MHz 50 100 kHz e Russia China India FM 87 5 108 MHz 50 kHz Signal to noise ratio FM 55 dB Frequency response FM 60 Hz 12 5 kHz Compatibility Hi Speed USB 2 0 e Class support UMS USB Mass Storage Class File system NTFS FAT16 FAT32 Maximum memory support lt 160GB Main Unit e Power supply Pacific Latin America 110 127V 220 240V 50 60Hz switchable Russia China India 220 240V 5OHz Power consumption 100 W Standby power consumption lt 0 3 W Dimensions WxHxD 434 x 253 x 129 mm Weight 3 6 kg Subwoofer Impedance 3 ohm Speaker drivers 165 mm 6 5 woofer Frequency response 40 Hz 150 Hz Dimensions WxHxD 196 x 395 x 342 mm Weight 5 25 kg Cable length 4 m
5. Channel ARC you can use it to output digital audio to the home theater fthe HDTV has a DVI connector connect using an HDMI DVI adapter fthe TV supports EasyLink HDMI CEC control the home theater and TV with one remote control see Use Philips EasyLink on page 19 Cable not supplied HDMI OUT HDMI OUT ARC Option 2 Connect to the TV through YPbPr component video Note The component video cable or connector might be labeled Y Cb Cr or YUV Cable not supplied Component Video Out Option 3 Connect to the TV through composite video CVBS he composite video cable or connector might be labeled AV IN VIDEO IN COMPOSITE or BASEBAND VIDEO OUT joo d 9 English Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box Choose from the following connectors El Press SSOURCE repeatedly to select the audio output of your connection Option 1 Connect audio through analog audio cables Cable not supplied ae fe L AUDIO IN Option 2 Connect audio through coaxial cable The digital coaxial cable or connector might be labeled COAXIAL DIGITAL OUT or SPDIF OUT Cable not s
6. chapter or file In radio mode selects a preset radio station E Stop 4 Eject Open Close Stops play Press and hold to eject the disc or open the disc compartment In radio mode erases the current preset radio station amp Mute Mutes or restores volume D BACK Returns to a previous menu screen POP UP MENU DISC MENU Accesses or exits the disc menu Source buttons e Color buttons for Blu ray discs Selects tasks or options e DISC Switches to disc source e RADIO Switches to FM radio e DOCK for iPod Switches to Philips Dock for iPod iPhone e JSOURCE Selects an audio input source EN English 4 Connect your home theater This section helps you connect your home theater to a TV and other devices The basic connections of the home theater with its accessories are provided in the Quick Start For a comprehensive interactive guide see www connectivityguide philips com Note e Refer to the type plate at the back or bottom of the product for identification and supply ratings Before you make or change any connections ensure that all devices are disconnected from he power outlet Connectors Connect other devices to your home theater Side connectors MP3 LINK lt D Wi Fi 9 3 MP3LINK Audio input from an MP3 player b lt gt USB Audio video or picture input from a USB sto
7. When you play a device that has its audio output routed to the home theater the home heater switches to the corresponding audio source automatically To use one touch audio enable this feature and follow the instructions on the TV to map the connected devices correctly to the audio input jacks of the home theater Audio Input Mapping Updates audio input mapping if there are new devices connected EN 19 English 6 Change settings This section helps you to change the settings of your home theater Caution Most of the settings are already configured with the best value for the home theater Unless you have a specific reason to change a setting it is best to leave it at the default value Access the setup menu 1 Pese Home 2 Select Setup then press OK The setup menu appears J selecta setup menu then press OK See the following sections for information about how to change the settings of your home theater 4 Press BACK to return to the previous menu or press f to exit Note You cannot change a setting that is grayed out Change video settings Press Home Select Setup then press OK Select Video then press OK Select and adjust the following settings TV Display Selects a picture display format to fit the TV screen e HDMI Video Selects the video resolution HDMI Deep Color Displays colors with more shades and hues w
8. a Wi Fi USB adapter on page 11 Turn on your TV and switch to the correct source for the home theater Press f Home Select Setup then press OK Select Network gt Network Installation then press OK For wired network select Wired Ethernet and press OK For wireless network select Wireless Wi Fi and press OK 6 Follow the instructions on the TV to complete the setup The home theater connects to the internet If connection fails select Retry then press OK 7 Select Finish then press OK to exit UAW N Connect a Wi Fi USB adapter Purchase a Wi Fi USB adapter model PHILIPS 1110 and set up the wireless network see Set up network on page 11 Wi Fi EN 11 English 5 Use your home theater This section helps you use the home theater to play media from a wide range of sources Before you start Check that you Make the necessary connections as described in the Quick Start and User Manual Switch the TV to the correct source for the home theater Access the home menu The home menu gives you easy access to connected devices audio and video settings and other features 1 Pese Home The home menu appears 2 Press the Navigation buttons and OK to select the following play Disc Starts disc play browse USB Accesses the content browser of the connected USB storage device e browse iPod Acces
9. a folder named UPG in the root directory of your USB storage device Download the software into the NUPG folder of the USB storage device Unzip the software in the NUPG folder Connect the USB storage device to the home theater Press Home and select Setup Select Advanced gt Software Update gt USB Follow the instructions on the TV to confirm the update When complete the home theater automatically switches off and restarts ND W N If not disconnect the power cord for a few seconds and then reconnect it Caution Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage the home theater EN 23 English 8 Product specifications Note Specification and design are subject to change without notice Region code The type plate on the back or bottom of the home theater shows which regions it supports g V ow Country Europe United Kingdom Asia Pacific Taiwan Korea Latin America Australia New Zealand Russia India oe China Playback media AVCHD BD RE BD Video DVD Video DVD R RW DVD R RW DVD R R DL CD R CD RW Audio CD Video CD SVCD Picture CD MP3 CD WMA CD DivX Ultra CD USB storage device File Format Audio mp3 Video divx mkv wmv Picture jpg gif png
10. on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 5 3D health warning If you or your family has a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing To avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time If you experience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until your symptoms have disappeared If symptoms persist do not resume watching 3D without consulting a medical professional first Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above Watching 3D is not recommended for children under six years of age as their visual system is not fully developed yet EN 5 English 3 Your home theater Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your home theater at www philips com welcome Main unit ex 22 Increases or decreases volume Display panel gt Play Pause Starts pauses or resumes play Stop Stops play In radio mo
11. troubleshooting picture in picture 2nd audio language 2nd subtitle language enable play 2D video 3D video disc from PC MP3 player multimedia content options radio troubleshooting USB storage device product care product specifications progressive scan 16 21 AA N amp d amp UU OS OS UO N R radio play program tune recycle region code remote control repeat rotate pictures 15 N M M S safety settings EasyLink parental control preferences slideshow animation duration play from iPod iPhone play musical slideshow software update version 21 21 21 16 16 19 23 23 sound auto volume 12 mode 13 surround 13 treble and bass 13 troubleshooting 26 subtitle language 15 21 subtitle shift 15 21 system audio control 9 T time search video 5 title 5 troubleshooting 25 TV audio from TV 10 18 connect 9 U USB play 15 software update 23 V video options 15 synchronize with audio 13 EN 29 English
12. your home theater is connected o the TV through HDMI Switch to the correct HDMI source on your TV Network Wireless netwo rk not found or distorted Ensure that the wireless network is not disturbed by the microwave ovens dect phones or other Wi Fi devices in your neighbourhood e rythe wired network installation if the wireless network does not work properly see Set up network on page 21 10 Index 3 3D video 14 A amplifier 24 audio connection 10 language 21 synchronize with video 13 audio input mapping 19 21 B BD Live access 14 set up 11 Bonus View 14 Browse PC 17 4 change settings 20 chapter 15 connect audio from TV 10 18 guide 8 network 10 other devices 10 TV 9 connectors 8 contact us 25 D disc play 13 supported discs 24 disposal of your product 5 DivX character set 15 DLNA 16 EN 27 English EasyLink settings 19 21 F file formats 24 H HDMI CEC see Easylink 19 Internet BD Live 14 connect 10 software update 23 iPod connect 10 play 18 slideshow 19 L language audio 15 21 disc menu 21 on screen display 21 subtitle 15 21 M media server software set up 17 MP3 play 18 N network connect 10 set up 11 software update 23 one touch play 19 21 one touch standby 19 21 overview connectors 8 main unit 6 remote control 6 28 P password PIN code picture options rotate slide show
13. Register your product and get support at www philips com welcome HTS5220 EN User manual RU UK PHILIPS Contents 1 Notice 2 Copyright 2 About Progressive Scan z Compliance 2 Open source software 2 Trademarks 2 2 Important 4 Safety 4 Product care 4 Disposal of your old product and batteries 5 3D health warning 5 3 Your home theater 6 Main unit 6 Remote control 6 4 Connect your home theater 8 Connectors 8 Connect to the TV 9 Connect audio from TV or other devices 10 Connect a Philips Dock for iPod iPhone 10 Connect to a computer network and the Internet 10 Connect a Wi Fi USB adapter 11 5 Use your home theater 12 Before you start 12 Access the home menu 12 Choose your sound 12 Play a disc 13 Use Bonus View on Blu ray 14 Access BD Live on Blu ray 14 Play 3D video 14 Play from a USB storage device 15 ore play features for disc or USB 15 Play from PC DLNA 16 Play from radio 17 Play audio from TV or other devices 18 Play from an MP3 player 18 Play from an iPod or iPhone 18 Use Philips EasyLink 19 6 Change settings 20 Access the setup menu 20 Change video settings 20 Change audio settings 20 Set up network 21 Set up EasyLink 21 Change preference settings 21 Change advanced settings 22 7 Update software 23 Check software version 23 Update software from the
14. and the double D symbol are trademarks of Dolby Laboratories S dts Master Audio Essential Manufactured under license under U S Patent T s 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 7 392 195 7 272 567 7 333 929 7 212 872 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS HD and DTS HD Master Audio Essential and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved DivXG DivX Certified and associated logos are registered trademarks of DivX Inc and are used under license DivX Ultra amp Certified to play DivX video with advanced features and premium content ABOUT DIVX VIDEO DivXQ is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified amp device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in your device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Ay Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countr
15. ay audio from TV or other devices Press SOURCE repeatedly to select the audio output of the connected device Play from an MP3 player Connect and play audio files from an MP3 player or other external audio devices 1 Connect the MP3 player to the home theater as described in the Quick start guide 2 Press SOURCE repeatedly until MP3 LINK appears on the display panel Press the buttons on the MP3 player to select and play audio files Play from an iPod or iPhone By connecting and installing a Philips Dock for iPod iPhone you can use the home theater to play music movies and photos from your iPod or iPhone Note Philips Dock for iPod iPhone is sold separately You can charge your iPod iPhone on the dock while the home theater is in iPod mode Dock your iPod or iPhone 1 Connect the dock to the home theater and connect the yellow composite cable from the dock to the TV For more information see the Quick Start provided with the dock 2 Switch on the iPod or iPhone and place it in the dock On the home theater remote control press f Home then select browse iPod and press OK Listen to music 1 Dock your iPod or iPhone see Dock your iPod or iPhone on page 18 2 Press DOCK for iPod on the home theater remote control The playlists are displayed on the TV 3 Press the Navigation buttons and OK to select and play tracks Watch video or view slideshows Note
16. ayback Set up network 5 Press Home Select Setup then press OK Select Network then press OK Select and adjust the following settings Network Installation Starts wired Ethernet or wireless setup Follow the instructions to set up the network connection e View Network Settings Displays the current network settings e View Wireless Settings Displays the current Wi Fi settings Press OK to confirm your choice Set up EasyLink AWN Press ft Home Select Setup then press OK Select EasyLink then press OK Select and adjust the following settings e EasyLink Enables or disables EasyLink One Touch Play Enables or disables One Touch Play If enabled you can use the remote control to start disc play in the home theater and the TV switches automatically to the correct channel One Touch Standby Enables or disables One Touch Standby If enabled the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices System Audio Control Enables or disables System audio control If enabled follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater The home theater switches automatically to the audio source of the connected device Audio Input Mapping Updates audio input mapping if there are new devices conn
17. cable Use Bonus View on Blu ray Blu ray discs that support the Bonus View feature also known as Picture In Picture allow you to view special content such as a director s commentary while watching the main feature 1 necessary enable BonusView or Picture In Picture in the Blu ray disc menu 2 During playback of the main feature press options menu is displayed 3 Selec PIP Selection gt PIP then press OK gt P options 1 2 depend on the video ontents 9 he picture in picture video appears in a small window 4 Selec 2nd Audio Language or 2nd Subtitle Language then press OK 5 Select the language to play then press OK Note To turn off the Bonus View Picture in Picture press OPTIONS select PIP Selection gt Off then press OK 14 EN Access BD Live on Blu ray BD Live enabled Blu ray discs include exclusive services such as movies and other online bonuses 1 Prepare the internet connection and set up the network see Connect to a computer network and the Internet on page 10 2 Connect the USB storage device to the home theater Select the BD Live icon in the disc menu then press OK BD Live starts to load The loading time depends on the disc and your internet connection 4 Press the Navigation buttons to navigate BD Live 5 Press OK to select an item The range of BD Live
18. ch movies stored on a USB storage device 1 Connect the USB storage device to the home theater Press Home The home menu appears Select browse USB then press OK content browser appears Select a file then press OK mR UC N Press the playback buttons to control play see Play a disc on page 13 Note fthe USB storage device does not fit into the connector use a USB extension cable he home theater does not support digital cameras that need a computer program to display photos The USB storage device must be NTFS or FAT formatted and Mass Storage Class compliant More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device Use video options Access several useful features while viewing video Note Available video options depend on the video source Press zzOPTIONS The video options menu appears 2 Press the Navigation buttons and OK to select and adjust e Audio Language Selects audio language for video e Subtitle Language Selects subtitle language for video e Subtitle Shift Adjusts the subtitle position on the screen Info Displays information about what is playing Character Set Selects a character set that supports the DivX subtitle Time Search Skips to a specific part of the video by entering the t
19. de erases the current preset radio station Eject Ejects the disc from the disc compartment Disc compartment Standby On Switches the home theater on or to standby SOURCE Selects an audio video source for the home theater EN Remote control 66 3 wxvz8 8tuv TOPMENU O e SUBTITLE PHILIPS PER On Switches the home theater on or to standby When EasyLink is enabled press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby f Home Accesses the home menu IHSOUND SETTINGS Accesses or exits various sound options Navigation buttons Navigates menus nradio mode press left or right to start auto search OK Confirms an entry or selection OPTIONS e Accesses more play options during playback nradio mode programs radio stations Volume Increases or decreases volume gt Play Starts or resumes play Pause Pauses play 4 gt P Fast Backward Fast Forward Fast backwards or fast forwards Press repeatedly to change the search speed Alphanumeric buttons Enters values or letters using SMS style entry SUBTITLE Selects subtitle language for video TOP MENU Accesses the main menu of a video disc I4 gt I Previous Next Skips to the previous or next track
20. e code please contact open source philips com If you prefer not o use email or if you do not receive confirmation receipt within a week after mailing to this email address please write in English to Open Source Team Philips Intellectual Property amp Standards PO Box 220 5600 AE Eindhoven The Netherlands f you do not receive timely confirmation of your etter please email to the email address above The texts of the licenses and acknowledgements for open source software used in this product are included on a separate leaflet Trademarks Blu ray 329 Blu ray 3D and Blu ray 3D logo trademarks of Blu ray Disc Association a BDI IVE BONUSVIEW BD LIVE and BONUSVIEW are trademarks of Blu ray Disc Association POWERED Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems Inc in the United States and or other countries AVCHD AVCHD and AVCHD logo are trademarks of Matsushita Electric Industrial Co Ltd and Sony Corporation x v Colour is a trademark of Sony Corporation dina CERTIFIED DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance I borpv IlboLBv VIRTUAL SPEAKER DIGITAL PLUS PRO LOGIC II Manufactured under license from Dolby Laboratories Dolby
21. eater 2 Press DISC or select play Disc in the home menu and press OK The disc plays or the disc main menu appears 3 Press the following buttons to control play Change treble mid and bass Change the high frequency treble mid frequency mid and low frequency bass settings of the home theater to suit your video or music 1 Press SOUND SETTINGS Select TREBLE MID or BASS then press OK 3 Press the Navigation buttons up down to adjust the frequency level Press OK to confirm Button Action Navigation Navigate menus buttons OK Confirms an entry or selection gt Play Starts or resumes play Pauses play Stops play I4 gt l Skips to the previous or next rack chapter or file 4 Fast backwards or fast forwards Press repeatedly to change the search speed Navigation Rotates the picture counter buttons up clockwise or clockwise down SUBTITLE Selects subtitle language for video POP UP Accesses or exits the disc MENU DISC menu MENU OPTIONS Accesses more play options during playback EN 13 English For video formats such as DivX and WMYV e Tostop play press To resume the video from where you stopped press Play e To play the video from the start press OK Note To play DivX DRM protected files from a disc or a USB storage device connect your home theater to a TV through an HDMI
22. eats a selected folder 16 Use audio options Access several useful features while audio is played Press zzOPTIONS repeatedly to cycle through the following functions REPEAT TRACK Repeats the current track e REPEAT DISC Repeats all the tracks on the disc or folder e REPEAT RANDOM Plays audio tracks in random order REPEAT OFF Turns off repeat mode Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow Select a music track then press OK Press lt gt BACK and go to the picture folder Select a picture then press OK to start slideshow NA Press to stop slideshow VUA Press again to stop music Play from PC DLNA When you connect your home theater to your home network you can play music photo and video from a computer or other media server on that network What you need e wired or wireless home network connected with a Universal Plug and Play uPnP router A Philips wireless USB adapter or a LAN able to connect your home theater to your home network e Amedia server such as PC running Windows Media Player 11 or higher or e Macrunning Twonky Media Server For help to use other media servers such as T Versity see the web site of the media server Set up media server software Before you start Connect your home theater to your home network see Connect to a computer netw
23. eck if the HDMI cable is faulty Replace with a new HDMI cable No picture on the Component Y Pb Pr connection e f the HDMI video connection is set to Auto or 1080p 24Hz there is no video output through the component connection Change the HDMI video setting or remove he HDMI connection No high definition video signal on the TV e Ensure that the disc contains high definition video e Ensure that the TV supports high definition video EN 25 English Sound No sound e Ensure that the audio cables are connected and select the correct input source for example SOURCE for the device you want to play No sound on HDMI connection You might not hear any sound if the connected device is not HDCP High bandwidth Digital Content Protection compliant or only DVI compatible Use an analog or digital audio connection Ensure that the HDMI Audio is enabled No sound from TV program Connect an audio cable from the audio input on the home theater to the audio output on the TV then press JSOURCE repeatedly to select the correct audio source Distorted sound or echo e Ensure that the T V volume is muted or set to minimum if you are playing audio through the home theater Audio and video are not synchronized 1 Press HISOUND SETTINGS 2 Press the Navigation buttons left right repeatedly until AUDIO SYNC is displayed then press OK 3 Press the Navigation buttons up d
24. ected D Press OK to confirm your choice Note The connected devices must be connected through HDMI and switched on Change preference settings Press Home Select Setup then press OK Select Preference then press OK AWN Select and adjust the following settings e Menu language Selects the on screen display menu language e Audio Selects audio language for video e Subtitle Selects subtitle language for video e Disc Menu Selects menu language for video disc e Parental Control Restricts access to discs that are recorded with ratings To play all discs irrespective of the rating select level 8 Screen Saver Enables or disables screen saver mode If enabled the screen enters idle mode after 10 minutes of inactivity for example in pause or stop mode e Auto Subtitle Shift Enables or disables shift subtitle If enabled it adjusts the subtitle position automatically to fit the TV screen Change Password Sets or changes a PIN code to play a restricted disc Enter 0000 if you do not have a PIN or if you have forgotten your PIN e Display Panel Changes the brightness of the display panel EN 21 English e Auto Standby Enables or disables auto standby If enabled the home theater switches to standby after 30 minutes of inactivity for example in pause or stop mode VCD Displays or skips the content menu fo
25. hen the video content is recorded in Deep Color and the TV supports this feature 20 Component Video Selects the component video resolution Copy protected DVDs can display only 480p 576p or 4801 5761 e Blu ray 3D video Selects the 3 dimensional video output when you play a 3D video on your home theater The home theater must be connected to a 3D TV through HDMI e Picture Settings Selects a predefined color setting D Press OK to confirm your choice The best setting is automatically selected for the TV If you change the setting ensure that the TV supports the new setting For settings related to HDMI the TV must be connected through HDMI For settings related to progressive or component video the T V must be connected through Component Video Change audio settings Press Home Select Setup then press OK Select Audio then press OK Select and adjust the following settings e Night Mode Selects quiet or full dynamic sound Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech HDMI Audio Selects HDMI audio format or disables audio output forthe TV D Press OK to confirm your choice Note For settings related to HDMI the TV must be connected through HDMI Night mode is available for Dolby encoded DVD and Blu ray discs for models support Blu ray pl
26. ies HIGH DEFINITION MULTIMEDIA INTERFACE HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries EE LL The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT EN 3 English 2 Important Read and understand all instructions before you use your home theater If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire ever expose the product and accessories to rain or water Never place liquid containers such as vases near the product If liquids are spilt on or into the product disconnect it from he power outlet immediately Contact Philips Consumer Care to have the product checked before use ever place the product and accessories near naked flames or other heat sources including direct sunlight ever insert objects into the ventilation slots or other openings on he product Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Disconnect the product from the power outlet before lightning storms When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire Before
27. ime of the scene 2nd Audio Language Selects the second audio language to play e 2nd Subtitle Language Selects the second subtitle language to play Titles Selects a specific title e Chapters Selects a specific chapter Angle List Selects a different camera angle e Menus Displays the disc menu EN 15 English e PIP Selection Displays Picture in Picture window Zoom Zooms into a video scene picture Press the Navigation buttons left right to select a zoom factor Repeat Repeats a chapter or title Repeat Marks two points within a chapter or track for repeat play or turns off repeat mode e Picture Settings Selects a predefined color setting Use picture options Access several useful features while viewing pictures 1 Press The pictures options menu appears 2 Press the Navigation buttons and OK to select and adjust Rotate 90 Rotates the picture 90 degree clockwise e Rotate 90 Rotates the picture 90 degree counter clockwise Zoom Zooms into a video scene or picture Press the Navigation buttons left right to select a zoom factor Info Displays picture information Duration per slide Sets the display speed for each picture in a slide show Slide Animation Selects animation for the slide show Picture Settings Selects a predefined color setting e Repeat Rep
28. nd modes to suit your video or music 1 Press SOUND SETTINGS 2 Select SOUND then press OK Press the Navigation buttons up down to select the following settings e ACTION ROCK Enhanced low and high range Ideal for action movies and rock or pop music e DRAMA JAZZ Clear mid and high range Ideal for drama movies and jazz music CONCERT CLASSIC Neutral sound Ideal for live concerts and classical music SPORTS Moderate mid range and surround effects for clear vocals and the atmosphere of a live sport venue 4 Press OK to confirm your choice Change surround sound mode Experience an immersive audio experience with surround sound modes 1 Press SOUND SETTINGS 2 Select SURROUND then press OK 3 Press the Navigation buttons up down to select the following settings DOLBY VS Dolby Virtual Speaker e STEREO Two channel stereo sound Ideal for listening to music 4 Press OK to confirm your choice Synchronize audio with video If the audio and video are not synchronized you can delay the audio to match the video 1 Press SETTINGS 2 select AUDIO SYNC then press OK 3 Press the Navigation buttons up down to sync the audio with the video 4 Press OK to confirm Play a disc The home theater can play a wide variety of discs including video audio and mixed media for example a CD R that contains JPEG pictures and MP3 music 1 Insert a disc into the home th
29. network 23 Update software from a USB 2 3 8 Product specifications 24 9 Troubleshooting 25 10 Index 27 EN 1 English 1 Notice Copyright Be responsible Respect copyrights This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited About Progressive Scan Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture In case of 525 or 625 progressive scan picture problems it is recommended that the user switch the connection to the standard definition output If there are questions regarding our TV set compatibility with this model 525p and 625p DVD player please contact our customer service center Compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC Open source software Philips Electronics Singapore Pte Ltd hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain sourc
30. ork and the Internet on page 10 e Connect your PC to the same home network Make sure that your PC firewall allows you to run Windows Media Player programs In Microsoft Windows Media Player 11 1 Connect the home theater to a network router see Connect to a computer network and the Internet on page 10 Switch on the computer and router Open Windows Media Player on the computer Select Library gt Media Sharing then select settings to share your media Select Library gt Add to Library then select settings to share the folder containing your media 6 Select Advanced options then add the folders to share A WN 7 Selec Library gt Apply Media Information Changes to activate the changes In Macintosh OS X Twonky Media v4 4 2 1 Connect the home theater to a network router see Connect to a computer network and the Internet on page 10 2 Switch on the Macintosh and router 3 Visit www twonkymedia com to purchase the software or download a free 30 day trial to your Macintosh 4 Open Twonky Media on the Macintosh The media sharing setting is turned by default thus enabling you to directly add folders for media sharing D Select Basic Setup gt Sharing then select settings to add a folder location or add more folders 6 select Save Changes to activate the changes Play multimedia content Note Before playing multimedia content from the computer ensure tha
31. ork independently switch off EasyLink cannot access BD Live features Check the network connection see Connect to a computer network and the Internet on page 10 or ensure that the network has been set up see Set up network on page 11 Clear memory storage see Change advanced settings on page 22 Ensure that the Blu ray disc supports BD Live feature The video movies photos video clips etc contents of the iPod iPhone do not display on TV e Video and photo browsing is not supported you can only browse the video and photo contents on the iPod iPhone itself Cannot see pictures from my iPod iPhone on the Connect a yellow composite cable from the dock to the TV e Switch the TV to the AV VIDEO source corresponding to the yellow composite cable Press PLAY on the iPod or iPhone to start the slideshow The audio is interrupted when play music from my iPod or iPhone in the docking station Ensure that you have installed the latest firmware on your iPod or iPhone For more information refer to the support website of your iPod or iPhone My 3D video plays in 2D mode Ensure that your home theater is connected o your 3D TV through HDMI Ensure that your disc is Blu ray 3D disc Ensure that the Blu ray 3D video setting is turned see Change video settings on page 20 see black video on my TV screen Ensure that
32. own to sync the audio with the video Play Disc cannot be played Clean the disc Ensure that the home theater supports the disc see Product specifications on page 24 Ensure that the home theater supports the region code of the disc For DVD RW or DVDR ensure that the disc is finalized DivX video files cannot be played Ensure that the DivX file is encoded according to the Home Theater Profile with the DivX encoder Ensure that the DivX video file is complete 26 EN DivX subtitles do not display correctly Ensure that the subtitle file name is the same as the movie file name Select the correct character set 1 Press zOPTIONS 2 Select Character Set 3 Select the supported character set 4 Press OK The contents of a USB storage device cannot be read Ensure that the format of the USB storage device is compatible with the home theater see Product specifications on page 24 Ensure that the USB storage device is formatted with a file system that is supported by the home theater No entry or x sign appears on the TV e The operation is not possible EasyLink feature does not work Ensure that the home theater is connected o a Philips brand EasyLink TV and that EasyLink is on do not want my home theater to be switched on when switch on my TV Thisis the correct behavior for Philips EasyLink HDMI CEC To make the home heater w
33. r VCD and SVCD discs Sleep Timer Sets a sleep timer to switch the home theater to standby after a specific time D Press OK to confirm your choice Note f your preferred disc language is not available you can select Other from the list and enter the 4 digit language code which can be found at the back of this manual f you select a language that is not available disc the home theater uses the default language of the disc Change advanced settings Press Home Select Setup then press OK Select Advanced then press OK Select and adjust the following settings BD Live Security Restricts or allows access to BD Live Enhanced Audio Enables or disables the audio post processing at the speaker output AWN Software Update Selects to update software from the network or from USB storage device Clear memory Clears local memory delete the BD Live files that you previously downloaded If using an USB storage device the local storage folder is BUDA DivX amp VOD Code Displays the DivX VOD registration code for the home theater Version Info Displays the software version for the home theater 22 Restore default settings Resets the home theater to the default settings programmed at the factory D Press OK to confirm your choice You cannot restrict internet access on commercial Blu ray discs Before yo
34. rage device C Wi Fi Connects to a Wi Fi USB adapter Model Philips WUB1110 sold separately Back connectors on VIDEO OUT out Li pina Yo DockforiPod was E 0000 xy JOO AC MAINS cl 9 LAN Connects modem or o the LAN input on a broadband router HDMI OUT ARC Connects to the HDMI input on the TV VIDEO OUT VIDEO Connects the TV o the composite video input on VIDEO OUT Y Pb Pr Connects the TV to the component video input on DOCK for iPod Connects Model DIGITAL I Connects o a Philips Dock for iPod iPhone Philips DCK3060 N COAXIAL to the coaxial audio output on the TV or a digital device SPEAKERS SUBWOOFER Connects to the supplied speakers and subwoofer AUDIO IN AUX 1 AUX 2 Connects TVorana AC MAINS to the power supply Connects o the analog audio output on the nalog device ANTENNA FM 750 Connects reception he FM antenna for radio Connect to the TV Connect your home theater directly to a TV through one of the following connectors from highest to basic quality video a HDMI b Component video C Composite video Option 1 Connect to the TV through HDMI he HDMI connector on the TV might be abeled HDMI IN or HDMI ARC fthe TV supports HDMI Audio Return
35. services depends on the disc When you use BD Live data on the disc and home theater are accessed by the content provider Usea USB storage device with at least 1 GB of free space to store the downloaded files e fthere is insufficient memory to download BD Live content clear memory space see Change advanced settings on page 22 Play 3D video Your home theater can play 3D videos on 3D TVs Before you start make sure that your TV is a 3D TV and is connected to your home theater through HDMI e your disc is a Blu ray 3D disc and e you have 3D glasses that are compatible with your 3D TV 1 Insert a Blu ray 3D disc into your home theater Your TV switches to the correct source and the disc plays automatically 2 Ifthe disc does not play automatically press DISC or select play Disc in the home menu and then press OK 3 Press the play buttons to control play When you search forward or backward and in some other play modes the video displays in 2D It returns to 3D when you play normally again 4 puton the 3D glasses to enjoy the 3D effects Play 3D discs in 2D 1 Pese Home Select Setup gt Video gt Blu ray 3D video gt Off 2 3 Press OK 4 Play your Blu ray 3D disc The 3D video is displayed in 2D Play from a USB storage device The home theater is fitted with a USB connector that allows you to view pictures listen to music or wat
36. ses the content browser of the connected iPod or iPhone e browse Accesses the content browser of the connected PC network Setup Accesses menus to change picture sound and other settings Choose your sound This section helps you choose the ideal sound for your video or music 2 DISC SOUND MENU IsErriNGS ND 1 Press SOUND SETTINGS 2 Press the Navigation buttons left right to access the sound options Sound Description experience AUTO Sets a constant output signal at VOLUME the speaker output This option is best for TV audio input where the commercial signal level is usually higher than the content SOUND Selects a sound mode SURROUND Selects a surround sound or stereo sound TREBLE Adjusts the high frequency output MID Adjusts the middle frequency output BASS Adjusts the low frequency output AUDIO SYNC Delays the audio to match the video 3 Select an option then press OK 4 Press BACK to exit If you do not press button within five seconds it automatically exits the menu Change auto volume Select the level of volume which output from your TV or other devices to the home theater Press SETTINGS Select AUTO VOLUME then press OK Press the Navigation buttons up down to select ON or OFF Press OK to confirm your choice Change sound mode Select predefined sou
37. t the home theater is connected to the computer network and the media server software is properly set up Press Home home menu appears N Select browse PC then press OK content browser appears Select a file then press OK Aw Press the playback buttons to control play see Play a disc on page 13 Play from radio The home theater can store up to 40 radio stations 1 Check that the FM antenna is connected 2 Press RADIO AUTO INSTALL PRESS PLAY appears on the display panel if you have not installed any radio stations Press P Play 3 Press the following buttons to control play EN 17 English Button Action I4 gt i Selects a preset radio station Navigation Searches for a radio station buttons left right Navigation Fine tunes a radio frequency buttons up down Press and hold to erase the preset radio station Press to stop the installation of radio stations anual Press once to access OPTIONS program mode and press again to store the radio station Automatic Press and hold for five seconds to reinstall radio stations Toggles between stereo and mono sound Note AM and digital radio are not supported f no stereo signal is detected you are prompted to install the radio stations again Forthe best reception place the antenna away from the TV or other sources of radiation Pl
38. u purchase DivX videos and play them on the home theater register the home theater on www divx com using the DivX VOD code You cannot reset parental control setting to its default value 7 Update software To check for new updates compare the current software version of your home theater with the latest software version if available on the Philips web site Check software version 1 Pese Home 2 Select Setup then press OK J select Advanced gt Version Info then press OK The software version is displayed Update software from the network 1 Prepare the internet connection see Connect to a computer network and the Internet on page 10 Press Home and select Setup Select Advanced gt Software Update gt Network Ifan upgrade media is detected you are prompted to start or cancel the update WN 4 Follow the instruction on the TV to confirm the update When complete the home theater automatically switches off and restarts If not disconnect the power cord for a few seconds and then reconnect it Note fthe home theater is unable to connect to the Philips server press f Home select Setup gt Network gt Network Installation to set up the network Update software from a USB 1 Check for the latest software version on www philips com support Search for your model and click on software and drivers Create
39. upplied DIGITAL IN COAXIAL IN Connect a Philips Dock for iPod iPhone Philips Dock for iPod iPhone not supplied DOCK for iPod Connect to a computer network and the Internet Connect the home theater to a computer network and enjoy e Multimedia content streamed from your computer view photos play music and watch video files streamed from your computer see Play from PC DLNA on page 16 e Software update update the software of the home theater through the network see Update software from the network on page 23 What you need Anetwork router with DHCP enabled e A network cable RJ45 straight cable e computer with media server software installed see Set up media server software on page 17 For software update make sure that the network router has access to the Internet and is not restricted by firewalls or other security systems EH Caution Familiarize yourself with the network router media server software and networking principles before attempting to connect the home theater to a computer network If necessary read documentation accompanying network components Philips is not responsible for lost damaged or corrupt data Cable not supplied Set up network 1 Connect the home theater to a network router through wired or wireless network connection see Connect
40. you connect the product to the power outlet ensure that the power voltage matches the value printed on he back or bottom of the product ever connect the product to the power outlet if the voltage is different Risk of injury or damage to the home theater 4 For wall mountable products use only the supplied wall mount bracket Secure the wall mount to a wall that can support the combined weight of the product and the wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage For speakers with stands use only the supplied stands Secure the stands o the speakers tightly Place the assembled stands on flat level surfaces that can support the combined weight of the speaker and stand ever place the on power cords equipment fthe product is product or any objects or on other electrical ransported in emperatures below 5 C unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet Visible and invisible laser radiation when open Avoid exposure to beam Do not touch the disc optical lens inside the disc compartment Risk of overheating e Never install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product
Download Pdf Manuals
Related Search