Tetrax EGO Silver
Contents
1. TETRAX Invisible Attraction Istruzioni di montaggio Assembly instructions Instructions de montage Montageanleitung Instrucciones de montaje MADE IN ITALY TETRAX Invisible Attraction Clear the rear device surface with a damp cloth or paper and dry Take the clip and place it on Tetrax leaving the adhesive part free photo 1 photo 2 Remove the clip adhesive film Use the blister as a Template to find the centre of the device in a smooth area being careful to place it in the upper half of the device photo 3 Adequately press the Tetrax against the device for about 10 seconds so that the clip 3M adhesive perfectly adheres to the surface photo 3 Remove Tetrax and make sure the clip is well adhered to the device photo 4 EGO GEO version place Tetrax on the car vent turning the ring until the clamps are adequately tightened without forcing photo 5 FIX version apply Tetrax after removing the adhesive film on a flat and smooth surface and slightly press down for about 10 seconds so that the 3M adhesive perfectly adheres to the surface photo 5 Near the Tetrax device clip the four magnets force of attraction will do the rest photo 6 To remove the device slide it sideways or down Do not assemble or adjust Tetrax while driving Due to its size it is not suitable for children under 5 Do not use for purposes other than those intended Roughness or surfa2. ce wrinkles may alter clip adhesion Magnetic device do not leave credit cards or other magnetic storage supports near Tetrax since saved information may be MADE IN ITALY
Download Pdf Manuals
Related Search