Home

Samsung UE46C7000

1. Select a position for the mode Position cannot be Q Self Diagnostic might take few seconds this is part of the normal operation of the TV E Picture Test Yes No Use to check for picture problems E Sound Test Yes No Use the built in melody sound to check for sound problems amp f you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button E Signal Information digital channels only HDTV channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength E Troubleshooting If the TV seems to have a problem refer to this description amp If none of these troubleshooting tips apply contact the Samsung customer service centre English 25 s n e y seg 0 Basic Features Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV W Software is represented as Year Month Day_Version Software Upgrade Current Version 2010 01 18 000001 By USB gt By Online By
2. 82 wa O eo 0 O INTERNET weve NRY AD PSIZE SUBT aa u gt Ce gt uE V J d page up Displays the next Teletext page page down Displays the previous Teletext page index Displays the index contents page at any time while you are viewing Teletext reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again E cancel Shrinks the Teletext display to overlap with the current broadcast Typical Teletext page Part Contents A Selected page number B Broadcasting channel identity Cc Current page number or search indications D Date and time E Text F Status information FASTEXT information English 53 UOHEULIOJU 194 O 90 Other Information Assembling the Cables Stand Type f a ld o J QA o 2 E z Sa a te Wall Mount Type Do not pull the cables too hard when arranging them This may cause damage to the product s connection terminals 54 English Installing the Wall Mount Assembling the Blanking Bracket When installing the TV onto a wall attach the Blanking Bracket as shown EET uoewoju 1494 O 90 Blanking Bracket Installing the Wall Mount Ki
3. Network Connection Depending on Models If you are using a HDMI connection check the audio output setting on your PC Wireless network connection failed Samsung Wireless USB dongle is required to use a wireless network Make sure the Network Connection is set to Wireless p 30 Make sure the TV is be connected to a wireless IP sharer router Recording Timeshift The USB device is not recognized or a Device Format Checking Device or Device Performance Test fails A message prompts me to format a USB device that has been working well See the manual for the USB device to check that the USB device supports recording If the USB device has a lock ensure it is off Check that the USB device can be formatted when connected to the PC Connect the USB to the TV and format it Formatting may fail intermittently if a Device Performance Test or formatting failed it means that there is a problem with the USB hardware or the performance of the USB hardware is too low If the USB device has a lock ensure it is off Recover the USB device using the recovery function in Checking Device The recording function does not work Check that a USB device is connected Check that the channel is a recordable digital channel if the signal is weak or does not exist the recording function will automatically be closed The TV will not record if the USB device has no free memory space Check that this is not the case
4. Recording recorder Starts recording immediately using the recorder This is only available for devices that support the recording function Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name a Setting Up Anynet H Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off The active source on the TV must be set to TV to use the Anynet function Even if an external device is still recording it may turn off a Switching between Anynet Devices 1 Anynet devices connected to the TV are listed A it you cannot find a device you want press the Red button to refresh the list 2 Select a device and press the ENTER C button You can switch to the selected device amp Only when you set Anynet HDMI CEC to On in the Application menu the Device List menu appears e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation If you have selected external input mode
5. Timeshift Mode does not work Check that a USB device is connected Radio channels and analogue broadcasts are not supported Data broadcast channels are not supported If the signal is weak or does not exist the Timeshift Mode function will automatically be closed Timeshift Mode cannot be performed if the USB device has no free memory space Check that this is not the case A message indicates a performance test failure and the recording and Timeshift Mode functions do not work These problems may occur if you use a low capacity USB device that does not support recording We recommend using the USB HDD English 59 UOHEULIOJU 194 O 90 Other Information Issues Solutions and Explanations A scheduled recording has failed A scheduled recording is disabled for certain operations formatting performance test error checking deleting that access the file system of a USB device If there is no USB device connected the TV will not record even if the scheduled time is reached The TV will not record if the USB device has no free memory space Check that this is not the case If you record a channel locked with Parental lock the PIN input window will appear when you try to play back the recording Several recording devices are connected but the TV stopped recording If multiple recording devices are connected and the device set as Default Recording Device has no free memory space the recording func
6. 2 Press the lt P A V button to select the desired file in the file list 3 Press the ENTERC button or gt Play button During playing the music you can search using the lt and gt button 44 REW and gt gt FF buttons do not function during play amp Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device Music 1 No Singer 01 10 04 02 C Pause lt gt Jump 42 Tools D Return amp Ifthe sound is strange when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem amp You can create My Playlist selecting the desired music in the file and can play My Playlist Photos Viewing a Photo or Slide Show 1 Press ENTERC button in the Media Play menu 2 Press list 3 Press Whi he lt or gt button to select Photos then press the he lt A button to select the desired file in the file he ENTER C button or gt Play button e a photo list is displayed press the gt Play ENTER C button on the remote control to start slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order from currently being shown Music files can be automatically played during the Slide Show if the Backgr
7. NOTE zone If there is no music file on the USB device or the Qy When Country is set to Others you can use this folder containing a music file is not selected the function Timer function does not operate correctly amp Q This function is only available when the Clock When there is only one photo file in the USB Mode is set to Auto device the Slide Show will not play If a folder name is too long the folder cannot be fil Using the Sleep Timer selected e Each USB you use is assigned its own folder E Sleep Timer GME Automatically shuts off the TV When using more than one of the same type of after a preset period of time 80 60 90 120 150 and USB make sure the folders assigned to each 180 minutes USB have different names amp To cancel Sleep Timer select Off Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected amp Auto Power Off available only when the TV is turned on by Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating English 23 Basic Features Locking Programme Security amp The PIN input screen appears before the setup screen amp Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option HB Child Lock Off On Lock chann
8. option to test your network connection English 49 Advanced Features D Using the Internet TV service Samsung Apps Samsung Apps is a store for downloading applications to be used on Samsung TV AV equipment Users can enjoy a variety of contents like videos music photos games useful information etc using the downloaded applications Additional applications will be available hereafter Samsung Apps Video What s New 2 iii Video kra YouTube You Tube Sports TV store Test User002 Game Lifestyle Information o Other My Page Help A Login Bi Thumbnail View ID Sortby D Return amp Using the colour buttons with the Samsung Apps A Red Login To log in to the internet service E Green Thumbnail View To change the view mode D Blue Sort by To sort the applications by Featured Most downloaded Most recent or Name e Return Moves to previous menu Skype Skype created a little piece of software that makes communicating with people around the world easy and fun With Skype you can say hello or share a laugh with anyone anywhere And if both of you are on Skype it s free Communicate with people around the world amp For more information download the Skype user s manual from www samsung com Using the Samsung Apps by category The following categories are available e What s New Displays newly registered applications e Video Displays various video media s
9. 2100AB SSG 2200AR SSG 2200KR to view 8D video Samsung 3D Active Glasses are sold separately For more detailed purchasing information contact the retailer where you purchased this TV SAMSUNG 3D emitter amp If there is any obstacle between the emitter and 3D Active Glasses the proper 3D effect may not be obtained 3D Mode Select the 3D input format A it you want to feel the 3D effect fully please wear the 3D Active Glasses first and then select 3D Mode from the list below that provides the best 3D viewing experience Q When watching 3D images turn on 3D Active Glasses 3D Mode Operation Off Turns the 3D function off 2D gt 3D Changes a 2D image to 3D A Displays two images next to EE Side by Side each other Displays one image above H Top amp Bottom another 7 Displays the images for the left E Line by Line and right eye alternately in rows Displays the images for the E Vertical Stripe left and right eye alternately in columns Displays the images for the Checker A Bi Board eft and right eye alternately in pixels Displays the images for the Frequency eft and right eye alternately in rames Side by Side and Top amp Bottom are available when the resolution is 720p 1080i and 1080p in DTV HDMI and USB mode or set to PC connecting through HDMI DVI cable amp Q Vertical Strip Line
10. Component HDMI1 DVI HDMI2 HDMI3 HDMI4 USB amp Q In the Source List connected inputs will be highlighted amp Ext Ext 2 and PC always stay activated amp the device connected to the input jacks to make your input source selection easier gt amp When a PC with a resolution of 1920 x 1080 60Hz is connected to the HDMI IN 1 DVI port you should set to DVI PC mode under Edit Name When connecting an HDMI DVI cable to the HDMI IN 1 DVI port you should set to DVI PC or DVI Devices mode under Edit Name If an HDMI cable is connected to the HDMI IN 1 DVI port the audio may not work In this case connect to the PC DVI AUDIO IN port English 1 1 Basic Features Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions CONTENT MENU m e o REM lt xT o ENTER L Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu MENU button Displays the main on screen menu EXIT button Exits the on screen menu How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appear on the screen Picture Sound Channel Setup Input Application Support 1 MENU M 2 A Y Select an icon with the A or Y button 3 ENTER Press ENTER 4 to access the sub menu 4 A Y Sele
11. Option Menu Set each channel using the Channel Manager menu options Lock Unlock Timer Recording Timer Viewing Sort Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings HM Lock Unlock Lock a channel so that the channel cannot be selected and viewed NOTE e This function is available only when the Child Lock is set to On e The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Timer Recording digital channels only Allows you to record a programme currently being broadcasted or make a reservation to record a programme scheduled for broadcast AUSB device with 4GB of memory or greater must be connected to the TV Q amp Q AUSB storage device cannot record until it completes the Device Performance Test Incase of USB HDD over 5400rpm amp Incase of USB Stick USB 2 0 and SLC Type Minimum size of USB Stick is 2GB To record press the REC button on the remote Press e REC twice to set the recording duration H Timer Viewing You can set a desired channel to be displayed automatically at the reserved time Set the current time first to use this function amp Whena digital channel is selected press the gt button to view the digital Pro
12. SHOCK DO NOT REMOVE COVER OR BACk THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol alerts you that important literature concerning operation and maintenance has been included with this product e The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation To ensure reliable operation of this apparatus and to protect it from overheating these slots and openings must never be blocked or covered Do not cover the slots and openings with a cloth or other materials Do not block the slots and openings by placing this apparatus on a bed sofa rug or other similar surface Do not place this apparatus in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Give your product 10 cm 4 inch clearance from the wall e Do not place this apparatus near or over a radiator or heat resistor or where it is exposed to direct sunlight e Do not place heat generating items such as candles ashtrays incense flammable gas or explosive materials near the product e Do not place a water containing vessel on this apparatus as this can result in a risk of fire or electric shock e Do not expose this apparatus to rain or place it near water near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc If this apparatus accidentally gets wet unplug it and cont
13. TV set e For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws that are too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Product Family inches VESA Spec A B Standard Screw Quantity 19 22 75X75 M4 23 29 200 X 100 Paine 32 37 200 X 200 4 Ultra Slim M8 40 55 400 X 400 56 65 600 X 400 electric shock f Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to 56 English Anti theft Kensington Lock amp The Kensington Lock is not supplied by Samsung It is a device used to nn A Q physically fix the system when using it in a public place The appearance and SNRs Ra pa a locking method may differ from the illustration depending on the manufacturer 1 0 Refer to the manual provided with the Kensington Lock for additional AF X9 ai information on proper use Kl 3 amp Please find a fQ icon on the rear of the TV A kensington slot is beside x a
14. an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker e TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker TV Speaker On External Speaker On amp If there is no video signal both speakers will be mute 22 English Additional Setting digital channels only E DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level amp According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB amp To increase or decrease the volume adjust between the range 0 and 10 respectively E SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options
15. can play the video file with Subtitle This function only works if the Vv Vv w subtitles are the same file name as the video file Audio You can enjoy video in one of supported languages as required The function is only enabled when stream type files which support multiple audio formats Vv Vv are played Audio Description You can adjust the audio description p 22 Vv Stop Slide Show You can start or stop a slide show Vv Start Slide Show Slide Show Speed You can select the slide show speed during the slide show Vv Slide Show Effect You can set variously the slide show effect Vv Background Music You can set and select background music when watching a slide show Vv Zoom You can zoom into images in full screen mode Vv Rotate You can rotate images in full screen mode Vv Home Background You can move the file to the Media Play desktop Vv Information You can see detailed information about the played file Vv Vv Vv Vv Settings H Cont movie play help Resume Play On Off Select to display the help pop up message for continuous movie playback H Get the DivX VOD registration code Shows the registration code authorized for the TV If you connect to the DivX web site and register the registration code with a personal account you can download VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on DivX VOD visit www DivX com H Get the DivX VOD d
16. device you want to connect How to connect an existing Ad hoc device 1 Follow Steps 1 through 6 in the How to set up using PBC WPS p 31 2 Choose Select a network The Device Network list appears 3 Select the device you want in the Device list 4 If security key is required input the security key amp Q If network doesn t operate normally check the Network Name SSID and Security Key again An incorrect Security Key may cause a malfunction Network Setup Manual If the other methods do not work you need to enter the Network setting values manually Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen In the pop up menu click Status On the dialog that appears click the Support tab On the Support tab click the Details button The Network settings are displayed How to set up manually To enter the Network connection values manually follow these steps 1 Follow Steps 1 through 6 in the How to set up using PBC WPS p 31 2 Press the W button to select Internet Protocol Setup and then press the ENTER C button Press the A or Y button to select Manual and then press the ENTER C button 3 Press the V button to go to the first entry field IP Address Use the number buttons to enter numbers 5 When done with each field use the button to mov
17. for retail a environments e To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume OSD press and hold MENU for 5 sec Press the A or Y button then press the ENTER C button Select the appropriate country Press the A or Y button then press the ENTER C button Select Air or Cable Press the A or Y button then press the ENTER C button Select the channel source to memorise When setting the antenna source to Cable a step appears allowing you to assign numerical values channel frequencies to the channels For more information refer to Channel Auto Store p 14 amp Press the ENTERC button at any time to interrupt the memorizasion process Set the Clock Mode automatically or manually Press the A or Y button to select Auto then press the ENTER C button Press the A or W button to select the your time zone then press the ENTER C button depending on the country The connection method for the best HD screen quality is displayed Press the ENTER C button If You Want to Reset This Feature Select Setup Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 If you want to change the PIN number use the Change PIN function English 7 Connections Connecting to an AV Device Using an HDMI or HDMI DVI cable up to 1080p Available devices DVD Blu ray player HD cable box
18. in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available when the input source is set to TV or PC e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie Equalizer is not available E BD Wise Off On Provides the optimal picture quality for Samsung DVD Blu ray and Home Theatre products which support BD Wise When BD Wise is turned On the picture mode is automatically changed to the optimal resolution Q Available when connecting Samsung products that support BD Wise through a HDMI cable E Menu Transparency Bright Dark Set the Transparency of the menu E Melody Off Low Medium High Set so that a melody plays when the TV is turned on or off Melody is disabled when FastStart is On E FastStart Off On When the TV is powered on the screen will come on quickly with this feature Common Interface HCl Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off 1 Purchase a Cl CAM module at your nearest dealer or by phone 2 Firml
19. input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode English 19 Basic Features How to watch the 3D image 3D To watch in 3D wear 3D glasses and press the power button on the glasses SAMSUNG GMET J Viewing 3D TV motion pictures for long periods may cause eye fatigue and or dizziness Cancel 4 gt Move C Enter D Exit Using the LEFT RIGHT keys on the remote control select the icon suitable for the picture on screen Move CP Erer Eit 1 Press the CONTENT button then the Content View menu will appear 2 Press the lt or gt button then select 3D To watch in 3D wear 3D Active Glasses and press the power button on the glasses 3 Select OK then press the ENTER C button 4 Using the lt or gt buttons on your remote control selects the 3D Mode of the image you want to view Q Some 3D modes may not be available depending on the format of the image source Supported formats and operating specifications for Standard HDMI 3D amp The 3D formats indicated below are recommended by the HDMI association and must be supported Source signal format Standard HDMI 1 4 3D 1920x1080p 24Hz x 2 1920x2205p 24Hz 1280x720p 60Hz x 2 1280x1470p 60Hz 1280x720p 50Hz x 2 1280x1470p 50Hz The mode is automatically switched to 3D mode for the 3D video input in one of the formats above For the Standard HDMI 3D format with 24Hz
20. sites and Samsungparts com To use a wireless network your TV must be connected to a wireless IP sharer If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure f you apply a security system other than the systems listed blow it will not work with the TV f Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed for your AP Samsung TVs will not support a connection in compliance with new Wi Fi certification specifications f your AP supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode f your router modem or device isn t certified it may not connect to the TV via the Samsung Wireless LAN Adapter Connection Methods You can setup the wireless network connection six ways Samsung Auto Configuration PBC WPS Auto Setup Using the Auto Network Search function Manual Setup SWL Samsung Wireless Link Ad Hoc The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting
21. the TV is optimized as follows Resolution First Display Mode If Motion Plus is set to Off Clear or Standard you can watch the video at a high resolution optimized to the resolution of the source video Judder Reduction Display Mode When Motion Plus is set to Smooth or Custom you can watch a smooth picture without judder 20 English Before using 3D function amp NOTE You may notice a small amount of screen flickering when watching 3D images in poor light conditions from a strobe light etc or under a fluorescent lamp 50Hz 60Hz or 3 wavelength lamp If so dim the light or turn the lamp off 3D mode is automatically disabled in following cases when changing a channel or the input source or accessing Media Play or Internet TV Some Picture functions are disabled in 3D mode e PIP and Data broadcasts MHEG MHP are not supported in 3D mode e 3D Active Glasses from other manufacturers may not be supported e When the TV is initially powered on may take some time until the 3D display is optimized The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses e When watching pictures from a 50Hz 3D source with its Game mode On visually sensitive viewers may see some flicker on bright images e Photos of Med
22. to select Internet Protocol Setup and then press the ENTER C button Press the A or Y button to select Auto and then press the ENTER C button 3 Press the A button to go to Select a Network and then press the ENTER C button The Network function searches for available wireless networks When done it displays a list of the available networks 4 Inthe list of networks press the A or Y button to select a network and then press the ENTER C button amp Ifthe AP is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security Key to establish the connection 3 2 English 5 10 11 If the Security PIN pop up appears go to Step 6 If the Network Connecting Screen appears go to Step 10 Press the A or W button to select Security or PIN For most home networks you would select Security for Security Key The Security Screen appears Network Setup Security Key C 0 entered ee a es a a a Neder lds aa els i ees ls lS Lower case GOs Uae WOU WRS US WS als Delete Oe Oe ee ee es ee es Space lt gt Move C Enter 5 Return On the Security screen enter your network s Pass Phrase _ You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem To enter the Pass Phrase follow these general directions Press the number buttons on your remote to enter numbers Use the direction
23. via a USB hub or via a USB extension cable other than the one available from Samsung 30 English Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter In such a case establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference Method 1 Connect using the USB right angle adapter oa Network Setup Samsung Auto Configuration This function is available in APs Access Points that support Samsung Auto Configuration If your AP does not you can connect through PBC WPS auto or manually This function is available when SWL Samsung Wireless Link is set to Off amp You can check for equipment that supports Samsung Auto Configuration on www samsung com How to set up using Samsung Auto Configuration 1 Place the AP and TV next to each other and turn them on Because the booting times of applications differ you may have to wait for approximately 2 minutes amp ifthe LAN cable connected the WAN port of AP during Samsung Auto Configuration you are able to complete until internet connection test If you do not connect Samsung Auto Configuration will check only device connecting of AP Not check internet After 2 minutes connect the Samsung Wireless LAN Adapter to the TV When the Samsung Wi
24. 2 the Ba on Tae f 5 To lock the product follow these steps lt Optional gt 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock amp These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model Securing the TV to the wall children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided in the included Safety Flyer For added stability and Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your safety install the anti fall device as follows To Avoid the TV from Falling 1 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally 2 Remove the screws from the back centre o
25. 24 3 mm 1283 4 X 302 2 X 833 4 mm Weight Without Stand 13 2 kg 16 8 kg 22 2 kg With Stand 15 4 kg 19 1 kg 24 5 kg amp Design and specifications are subject to change without prior notice amp For information about power supply and more about power consumption refer to the label attached to the product Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other house harm to the environment or human health from uncontrolled wasi and recycle them responsibly to promote the sustainable reuse oi hold waste at the end of their working life To prevent possible e disposal please separate these items from other types of waste f material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contaci their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the Europ
26. 60 75 231 74 857 130 000 640 x 480 31 469 59 940 25 175 640 x 480 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 1024 x 768 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 1152 x 864 67 500 75 000 108 000 VESA DMT 1280 x 1024 63 981 60 020 108 000 1280 x 1024 79 976 75 025 135 000 1280 x 720 45 000 60 000 74 250 1280 x 800 49 702 59 810 83 500 1280 x 800 62 795 74 934 106 500 1280 x 960 60 000 60 000 108 000 1360 x 768 47 712 60 015 85 500 1440 x 900 55 935 59 887 106 500 1440 x 900 70 635 74 984 136 750 1600 x 1200 75 000 60 000 162 000 1680 x 1050 65 290 59 954 146 250 1280 x 720 52 500 70 000 89 040 VESA GTF 1280 x 1024 74 620 70 000 128 943 VESA DMT DTV CEA 1920 x 1080p 67 500 60 000 148 500 NOTE For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack e The interlace mode is not supported e The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported English 27 soinjee4 paoueapy vo Advanced Features You can set up your TV so that it can access the Internet through your local area network LAN using a wired or wireless connection Connecting to a Wired Network You c
27. Antenna Channel Qy Only available when the Input source is set to TV soinjee oiseg 0 Time Sun Mon Tue Wed Thu Fri Sat 4 gt Move Adjust C4 Enter 5 Return H Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button On Time Off Time Set the hour minute and activate inactivate To activate timer with the setting you ve chosen set to Activate Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or A it you disconnect the power cord you have to set the clock again Clock Mode Auto Manual amp Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually amp The antenna must be connected in order to set DTV the time automatically Channel when the Source is set to TV Select the Clock Set Set the Day Month Year Hour and Minute desired channel manually Contents when the Source is set to USB Select a amp amp Available only when Clock Mode is set to folder in the USB device containing music or photo files Manual to be played when the TV is turned on automatically Time Zone depending on the country Select your time amp
28. Channel Standby Mode Upgrade Off 2010 01 15_00000 Move CY Enter 5 Return Installing the Latest Version m By USB Gok TV Insert a USB drive T containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to to write down your settings so that you can easily reset them after the upgrade Alternative Software Rear Panel Tg e USB Drive E By Online Upgrade the software using the Internet Qy First configure your network For detailed procedures on using the Network Setup refer to the Network Connection instructions amp Ifthe internet connection doesn t operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade 26 English E By Channel Upgrade the software using the broadcasting signal amp Q Ifthe function is selected during the software transmission period software will be automatically searched and downloaded The time required to download the software is determined by the signal status HM Standby Mode Upgrade A manual upgrade will
29. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre T Web Site EIRE 0818 717100 www samsung com ie U K 0845 SAMSUNG 7267864 www samsung com uk imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No 2010 Samsung Electronics Co Ltd All rights reserved BN68 02590D 03 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Digital TV notice P po gt Pn Functionalities related to Digital dealer the possibility to receive Although this TV set meets the be required to agree to terms a performance in the local not TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local DVB T or DVB C signal DVB T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast ransmission of digital TV over cable However some differentiated featu
30. DMI or Component IN jacks Available when the picture mode is set to Movie and when the external input is set to HDMI or Component _ Some external devices may not support this function E LED Motion Plus Off Normal Cinema Ticker Removes drag from fast scenes with a lot of movement to provide a clear picture Picture Options In Pc mode you can only make changes to the Colour Tone Size and Auto Protection Time Picture Options Colour Tone Normal gt Size Auto Wide Screen Mode 16 9 Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Normal Film Mode Off v Move 4 Enter 5 Return Colour Tone Cool Normal Warm1 Warm2 amp Warm or Warm will be deactivated when the picture mode is Dynamic SN Settings can be adjusted and stored for each external device connected to an input on the TV Size Your cable box satellite receiver may have its own set of screen PSIZE sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Adjusts the picture size to 16 9 for DVDs or wide broadcasting Wide Zoom Magnifies the picture size more than 4 3 amp Adjusts the Position by using A Y buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size amp Adjusts the Position or Size by using A V button 4 3 The def
31. Diagnosis Picture Test p 25 If the test image is properly displayed the poor picture may caused by the source or signal e If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto programme Many HD channels are up scaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macro block error small block dots pixelization e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level or bad quality can cause picture distortion This is not a TV issue e Mobile phones used close to the TV cca up to 1m may cause noise in picture on analog and digital TV Colour is wrong or missing e If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or brightness e Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness p 16 e Adj
32. Empty the Recycle Bin function on the PC to permanently delete the file 36 English D Screen Display Move to the file you desired using the up down right left buttons and then press the ENTER C or gt Play button The file is played SN Supports the View Devices and Home in Media Play homepage Information i Videos movie o1 avi You can ascertain the selected file name and the number of files z zan and page Movie 02 avi Movie 04 avi i n z b Jan 10 2010 Jan 10 2010 File List Section f laste You can confirm the files H Jan 10 2010 SS A and groups that is sorted by Sort List Section 5 i each category Displays sorting standard amp Sorting standard is different depending on the contents Select I Sorting 42 Tools Operation Buttons E Red Change Device Selects a connected device E Green Preference Sets the file preference not supported in Basic view Yellow Select Selects multiple files from file list Selected files are marked with a symbol E Blue Sorting Selects the sort list AJ Tools Displays the option menu amp Using the a4 REW or gt gt FF button file list can move to next or previous page Recorded TV To use the recording or Timeshift Mode function the connected USB device must be available for recording Device format is recommended to use USB HDD amp During the Device formatting do not disconnect the device whi
33. For more information refer to Network Connection p 28 Unsupported fonts within the provider s content will not display normally Slow responses and or interruptions may occur depending on your network conditions English may be only supported in application service depending on region This feature is not available in some locations If you experience a problem using a application please contact the content provider According to circumstances of the contents provider an application s updates or the application itself may be discontinued Depending on your country s regulations some applications may have limited service or not be supported Screen Display TV Screen ptemet I Recommended Applications Displays the current channel Displays the recommended service by Samsung You are not able to add or delete a service in this list Information Displays notices new applications and advertisements brought to you by Samsung product introductions ZJE Downloaded Applications Displays the downloaded applications through the Samsung Apps Application service You can experience various service by provided samsung J Internet TV Settings Controls e A Red Login To log in to Internet TV E Green Mark as favourite To mark the applications as a favourite P Blue Sort by To sort the applications e 5 Return To return to the previous menu Edit and configure a
34. HD STB Set Top Box satellite receiver cable box STB satellite receiver DVD Blu ray player Red White amp HDMI IN 1 DVI 2 ARC 3 4 PC DVI AUDIO IN For better picture and audio quality connect to a digital device using an HDMI cable An HDMI cable supports digital video and audio signals and does not require an audio cable To connect the TV to a digital device that does not support HDMI output use an HDMI DVI and audio cables The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade Be sure to use an HDMI cable with a thickness of 14 mm or less Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur A basic high speed HDMI cable or one with ethernet is recommended This product does not support the ethernet function via HDMI This product supports the 3D and ARC Audio Return Channel functions via an HDMI cable Note that the ARC function is supported by the HDMI IN 2 ARC port only If 3D Auto View is set to On some functions such as Internet TV may be disabled In this case set 3D Auto View or 3D Mode to Off The ARC function allo
35. MPEG4 SP ASP 1920x1080 6 30 Motion JPEG 800x600 6 30 8 wmv ASF Window Media Video v9 1920x1080 6 30 25 WMA H 264 BP MP HP 1920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 1920x1080 6 30 8 MP3 ADPCM AAC XVID 920x1080 6 30 8 ig sans H 264 BP MP HP 920x1080 6 30 25 ROPOT AGILENT MPEG4 SP ASP 920x1080 6 30 8 VRO MPEG1 1920x1080 24 25 30 30 Li VOB MPEG2 1920x1080 24 25 30 30 A MPEG1 920x1080 24 25 30 30 a PS MPEG2 920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 920x1080 6 30 25 i MPEG2 920x1080 24 25 30 30 A a TS H 264 920x1080 6 30 25 HE AAC VC1 920x1080 6 30 25 English 39 Advanced Features Other Restrictions amp NOTE e If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above e Ifthe Index Table is in error the Seek Jump function is not supported Video Decoder Audio Decoder e Supports up to H 264 Level 4 1 e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not e supported e XVID MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max e GMC 2 over is not supported e H 263 is not supported e Only Samsung T
36. N Cable LAN Cable 1 For more information on how to configure your network refer to Network Connection p 28 You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 2 Using a LAN cable connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed You can connect the TV to the PC directly without connecting it through a Sharer Router English 35 soinjee4 paoueapy vo Advanced Features QX No supported functions when connecting to the PC through network The Background Music and Background Music Setting functions e Sorting files by preference in the Photos Music and Videos folders The lt lt REW or gt gt FF button while a movie is playing amp The Divx DRM Multi audio embedded caption does not supported amp Samsung PC Share manager should be permitted by the firewall programme on your PC O When you use Media Play mode through a network connection According to functions of the provided server The sorting method may vary The scene search function may not be supported e The Play Continuously function which resumes playing of a video may not be supported The Play Continuously function does not support multiple use
37. PCM or Dolby Digital Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms H Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Sound Reset OK Cancel Reset all sound settings to the factory defaults fl Selecting the Sound Mode When you set to Dual I I the current sound mode is displayed on the screen Auel Dual 1 2 Default Type re ono Mono Automatic Stereo Stereo gt Mono change Stereo Dual Dual I Dual I Dual I ono Mono Automatic NICAM Stereo Mono Stereo change Stereo o r Dual Mono Dual I Dual I S Dual I lt if the stereo signal is weak and an automatic switching Setting the On Off Timer occurs then switch to the mono amp Only activated in stereo sound signal E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first Timer 1 cne a ee S Source
38. R INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION EQUIPMENT OR SERVICES RELATING TO THE GUIDE PLUS SYSTEM Open Source Licence Notice In the case of using open source software Open Source Licences are available on the product menu Open Source Licence Notice is written only English English 6 1 Other Information Panel native Environmental Considerations 1920 x 1080 Operating Temperature 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing TV System Analogue B G D K L Depending on your country selection Digital DVB T DVB C DVB T2 UK Only Colour Video System Analogue PAL SECAM NTSC 4 43 NTSC 3 58 PAL6O Digital MPEG 2 MP ML MPEG 4 H 264 AVC MP L3 MP L4 0 HP L4 0 Sound System BG OK NICAM MPEGI HDMI IN 1 4 Video 1080 24p 1080p 1080i 720p 576p 576i 480p 480i Audio 2Ch Linear PCM 32 44 1 48kHz 16 20 24bits Analogue audio input HDMI IN1 only PC input HDMI IN1 only Stand Swivel Left Right 20 20 Model Name UE40C7000 UE46C7000 UE55C7000 Screen Size 40 inches 46 inches 55 inches Sound Output 10WX2 15WX2 Dimensions WxDxH Body 957 4 X 26 5 X 578 7 mm 1092 3 X 26 5 X 653 2 mm 1283 4 X 26 5 X 762 3 mm With stand 957 4 X 267 7 X 648 4 mm 1092 3 X 302 9 X 7
39. VE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW Warranty Card NSN EZ 1 N UNITED KINGDOM This Samsung product is warranted for a period of twelve 12 months from the original date of purchase against defective materials and workmanship In the event that warranty service is required you should return the product to the retailer from whom it was purchased However Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned In case of difficulty details of our Authorised Service Centres are available from Samsung Electronics U K Ltd Customer Care Centre PO Box 17243 Edinburgh EH11 4YB United Kingdom Tel 0845 SAMSUNG 7267864 UK amp Northern Ireland Tel 0818 717 100 EIRE Only Fax 44 0845 650 8080 Web www samsung com WARRANTY CONDITIONS 1 The warranty is only valid if when warranty service is required the warranty card is fully and properly completed and is pre
40. a channel automatically and stores in the TV amp Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Child Lock function the PIN input window appears 14 English E Antenna Source Air Cable JJF Select the antenna source to memorise H Channel Source Digital amp Analogue Digital Analogue Select the channel source to memorise When selecting Cable Digital amp Analogue or Digital Provide a value to scan for cable channels Search Mode Full Network Quick Scans for all channels with active broadcast stations and stores them in the TV f you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by pressing the button on the remote control Network Auto Manual Selects the Network ID setting mode among Auto or Manual Network ID When Network is Manual you can set up Network ID using the numeric buttons Frequency Displays the frequency for the channel differs in each country Modulation Displays available modulation values Symbol Rate Displays available symbol rates Manual Store Scans for a channel manually and stores in the TV If a channel is locked using the Child Lock function the PIN input window appears E Digital Channel When scanning has finished channels are updated in the channel list Q When selecting Antenna Air Channel Frequ
41. act an authorized dealer immediately Make sure to pull out the power cord from the outlet before cleaning e This apparatus use batteries In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations Please contact your local authorities for disposal or recycling information e Do not overload wall outlets extension cords or adaptors beyond their capacity since this can result in fire or electric shock e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against hem paying particular attention to cords at plug end adaptors and the point where they exit from the appliance e To protect this apparatus from a lightning storm or when it is left unattended and unused for long periods of time unplug it from he wall outlet and disconnect the antenna or cable system This will prevent damage to the set due to lightning and power line surges e Before connecting the AC power cord to the DC adaptor outlet make sure the voltage designation of the DC adaptor corresponds to the local electrical supply e Never insert anything metallic into the open parts of this apparatus Doing so many create a danger of electric shock e To avoid electric shock never touch the inside of this apparatus Only a qualified technician should open this apparatus e Make sure to plug the power cord in until it is firmly inserted When
42. an attach your TV to your LAN using cable in three ways e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable See the diagram below The Modem Port on the Wall External Modem 5 TV Rear Panel ADSL VDSL Cable TV Ti mm A Modem Cable LAN Cable LAN Adapter e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use Cat 5 cable for the connection See the diagram below The Modem Port on the Wall TV Rear Panel External Modem IP Sharer ADSL VDSL Cable TV N having DHCP server m E MEE 6 Modem Cable LAN Cable LAN Cable e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The LAN Port on the Wall TV Rear Panel LAN Cable LAN Adapter If you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address s
43. assword when connecting to the Internet The internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics at 1 800 SAMSUNG Media Play Enjoy recorded tv photos music and or movie MEDIA P files saved on a USB Mass Storage Class MSC F device and or your PC Recorded TV E SUM A Change Device D Device Mode C Enter D Return Connecting a USB Device 1 Turn on your TV TV Rear Panel 2 Connect a USB device containing recorded tv photo music and or movie files to the USB 1 HDD or USB 2 jack on the side of the TV 3 When USB is connected to the TV popup window appears Then you can select Media Play US Ie or USB Drive Connecting to the PC through network You can play pictures music and videos saved on your PC through a network connection in the Media Play mode amp f you use Media Play through saved file on your PC you should download PC Share Manager and users manual from www samsung com TV Rear Panel a or UUI Samsung a i Wireless LAN Adapter External Modem ADSL VDSL Cable TV Modem Cable LAN Cable LAN Cable LA
44. ault setting for a movie or normal broadcasting amp Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted s ne y seg 0 NOTE e Depending on the input source the picture size options may vary The available items may differ depending on the selected mode In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the TV After selecting Screen Fit in HDMI 1080i 1080p or Component 1080 1080p mode Adjusts the Position or Size by using A V lt gt button If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function Screen Mode 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size Q Not available in PC Component or HDMI mode English 1 7 Basic Features E Digital Noise Filter Off Low Medium High Auto Auto Visualisation When the broadcast signal is wea
45. ay You cannot use the play function when Plug amp Play initial setup is in progress The connected device is not e Check whether or not the device supports Anynet functions displayed e Check whether or not the HDMI cable is properly connected e Check whether Anynet HDMI CEC is set to On in the Anynet setup menu e Search Anynet devices again e You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected please repeat the device scan The TV Programme cannot be recorded Check whether the antenna jack on the recording device is properly connected The TV sound is not output through the receiver Connect the optical cable between TV and the receiver The ARC function enables digital output of sound using the HDMI IN 2 ARC port and can only be operated when the TV is connected to an audio receiver that supports the ARC function English 47 soinyee4 peoueapy vo Advanced Features Getting Started with Internet TV ia Recommended Internet TV INTERNET Internet TV brings useful and entertaining z j contents and services directly from the web to ye z v your TV by Date 1 1 A Samsung Apps A Login IB Mark as Favourite ID Sortby D Return NOTE Configure the network settings before using Internet TV
46. be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the LED product This phenomenon may continue for more than 1 hour until the software upgrade is complete H Alternative Software backup Displays the software version downloaded through By Online During the software upgrading When the Upgrade will discontinue from last step this function be activated HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software Advanced Features Connecting to a PC Using an HDMI DVI Cable a D sub Cable Display Modes D Sub and HDMI DVI Input Optimal resolution is 1920 X 1080 60 Hz Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity Mode Resolution KHz Hz MHz H V IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 1152 x 870 68 681 75 062 100 000 720 x 576 35 910 59 950 32 750 1152 x 864 53 783 59 959 81 750 VESA GNT 1280 x 720 56 456 74 777 95 750 1280 x 9
47. be connected e Check if the Anynet device power cord is properly connected e Check the Anynet device s Video Audio HDMI cable connections e Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode e Check whether the remote control is Anynet compatible e Anynet doesn t work in certain situations Searching channels operating Media Play or Plug amp Play initial setup etc e When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again e Check if the Anynet Function of Anynet device is set on want to start Anynet e Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu e Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet e Select View TV in the Anynet menu e Press the SOURCE button on the TV remote control and select a non Anynet device e Press P W A and PRE CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to e You cannot use the remote control when you are configuring Anynet or switching to a view mode Anynet device appears on the Use the remote control when the Anynet setting or switching to view mode is complete screen The Anynet device does not pl
48. bled for channels that support MHEG if Digital Text is Enable E RGB Only Mode Off Red Green Blue You can adjust Colour or Tint G R of Red Green or Blue for the picture from an external device DVD player home theatre etc H Colour Space Auto Native Custom Adjust the range of colours available to create the image To adjust Colour Red Green Blue and Reset set Colour Space to Custom MH White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings MH 10p White Balance Off On Controls the white balance in 10 point interval by adjusting the red green and blue brightness Available when the picture mode is set to Movie and when the external input is set to all input Q Some external devices may not support this function Interval Select interval to adjust Red Adjust the red level Green Adjust the green level Blue Adjust the blue level Reset Resets the 10p White Balance to its default settings E Flesh Tone Emphasize pink Flesh Tone HM Edge Enhancement Off On Emphasize object boundaries E xvYCC Off On Setting the xvYCC mode on increases detail and colour space when watching movies from an external device e g DVD player connected to the H
49. buttons become illuminated for a moment when pressed Using the remote control with this button set to on will reduce the battery usage time Have direct access to channels Alternately select Teletext ON Double o PRE CH _ Returns to the previous channel Mix or OFF S WEA al Cuts off the sound temporarily Pe A a Adjusts the volume A gt P Changes channels oug V Opens the OSD ere channel lists on the screen Displays the Content View which CONTENT MENU GUIDE m includes Guide 3D Internet TV Displays the EPG Electronic Programme Media Play and AllShare i Guide p 12 TOOLS S Quickly select frequently used functions Displays information on the TV screen Selects the on screen menu items and changes the values seen on the menu Returns to the previous menu Exits the menu These buttons are for the Channel Manager Internet TV Media Play menu etc mepiA p INTERNET Br MEDIA P Displays Media Play p 35 Tv INTERNET TV Link to various internet services p 48 AD PSIZE SUBT 3D Sets the video which provided with 3D signal p 19 AD Turns the audio description on and off p 22 This is not available in some locations P SIZE Selects the picture size p 17 SUBT Displays digital subtitles p 24 Use these buttons in Media Play and Anynet modes p 35 44 The Le button also controls record
50. buttons on your remote to move from button to button on the Security Key screen Press the Red button to change case or display symbols characters To a enter letter or symbol move to the letter or symbol and then press the ENTER C button To delete the last letter or number you entered press the Green button on your remote When done press the Blue button on your remote The Network Connecting screen appears Wait until the connection confirmation message is displayed and then press the ENTER C button The Network Setup screen re appears To test the connection press the RETURN button to select Network Test and then press the ENTER C button Network Setup Ad Hoc You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network This function is available when SWL Samsung Wireless Link is set to Off How to connect to new Ad hoc device 1 Follow Steps 1 through 6 in the How to set up using PBC WPS p 31 2 Choose Select a network A list of devices networks appears 3 While in the device list press the Blue button on the remote The message Ad hoc is a direct Wi Fi connection with cell phone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed is displayed 4 Input the generated Network Name SSID and Security Key into the
51. by Line and Checker Board are available when the resolution is set to PC connecting through HDMI DVI cable amp Frequency displays the frequency 60Hz only when the resolution is set to PC H 3D 2D Off On Displays the image for the left eye only This function is deactivated when 3D Mode set to 2D 3D or Off E 3D View point The overall adjustment of 3D perspective amp This function is deactivated when 3D Mode is set to 2D 3D or Off E Depth Adjusts focus depth in 2D 3D mode This function is only activated when the 3D Mode is 2D 3D H_ Picture Correction Adjusts the images for the left and right eye H 3D Auto View Off On If 3D Auto View is set to On a Side by Side format HDMI signal with one of the resolutions below is automatically switched to 3D Here correct 3D information must be sent from the Standard HDMI 3D Format amp ifa 3D failure occurs due to a 3D information error set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu amp Support resolution 16 9 only s n e y seg 0 Resolution Frequency Hz 1280 x 720p 50 60 Hz 1920 x 1080i 50 60 Hz 1920 x 1080p 24 30 50 60 Hz E 3D Optimisation The overall adjustment of 3D effect Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input An
52. by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List English 45 soinjee4 peoueapy vo Advanced Features D Recording You can make a recording of a TV Programme using a Samsung recorder 1 Select Recording amp When there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List Q When the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name amp Pressing the Le REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual i Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit f your receiver Supports audio only it may not appear in the device list The receiver will work when you have properly connected the optical in jack of the receiver to
53. ch folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation of content the distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e If more than 2 PTP devices are connected you can only use one at a time e If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported e If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction Ifthe TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV e Ifa USB extension cable is used the USB device may not be recognized or the files on the device may not be read e If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e Ifa file deleted from the PC is still found when Media Play is run use the
54. creen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen 18 English i Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the TV s 3D function Z WARNING Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove 3D Active Glasses and rest e Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing 3D TV remove your 3D Active Glasses and rest e A responsible adult should frequently check on children who are using the 3D function If there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D TV and rest Do not use the 3D Active Glasses for other purposes such as general eyeglasses sunglasses protective goggles etc e Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects tripping and or falling 3D This exciting new feature enables you to view 3D content In order to fully enjoy this feature you must purchase a pair of Samsung 3D Active Glasses SSG
55. ct the desired submenu with the A or Y button 5 lt gt Adjust the value of an item with the lt or gt button The adjustment in the OSD may differ depending on the selected menu 6 ENTER C Press ENTER C to complete the configuration 7 EXIT Press EXIT 1 2 English Using the INFO button Now amp Next guide The display identifies the current channel INFO and the status of certain audio video 1 settings 1 The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll lt gt to view information for a desired programme while watching the current channel e Scroll A V to view information for other channels If you want to move to the currently selected channel press the ENTER C button abc1 18 11 Thu 6 Jan DTV Air Life On Venus Avenue 18 00 6 00 mmummumm 15 Unclassified Watch No Detaild Information X Planning Your Viewing D Information Guide The EPG Electronic Programme Guide information is provided by broadcasters GUIDE Using programme schedules provided 2 by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Using Channel View DTV Air 800 five Home and Away 18 00 18 30 Drama Dani is devastated when scott ma
56. e successively to the next field You can also use the other arrow buttons to move up down and back 6 Enter the IP Address Subnet Mask and Gateway values 7 Press the A or button to go to DNS 8 Press the Y button to go to the first DNS entry field Enter the numbers as above 9 When done press the A button to go to Select a Network Select your network and then press the ENTER C button 10 Go to Step 4 in the How to set up automatically p 32 and follow the directions from that point on English 33 soinyee4 peoueapy vo Advanced Features SWL Samsung Wireless Link This function lets you connect a Samsung device that supports the PBC WPS to your TV You can connect devices to the TV even if a sharer is not connected to the TV To use the Internet TV the AP access point must be connected to the wireless network fa Samsung Wireless LAN Adapter is connected to the USB 2 port the network may not operate normally We recommend to connecting it to the USB 1 HDD port amp Only sharers using the 2 4 Ghz band are supported Sharers using the 5 Ghz band are not supported SWL connect You can directly connect a device that supports the PBC WPS to the TV This function is available when SWL Samsung Wireless Link is set to On How to connect Samsung Wireless Link For the procedures to establish a connection refer to the following 1 Follow Steps 1 through 5 in the How t
57. e watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected amp English is the default in cases where the selected language is unavailable in the broadcast English Digital Text Disable Enable If the programme broadcasts with digital text this feature is enabled E MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games Network Network Type Network Setup Network Test SWL Samsung Wireless Link SWL connect For details on setting up options refer to the Network Connection instructions p 28 General E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off
58. e TV set picture format menu for best possible match Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process G Frequently use all TV features d lesigned to reduce image retention and screen burnout refer to proper user manual section for details WARNINGS Image retention commonly known as screen burn in can occur on most types of television if the same image is displayed continuously The most common causes of image retention are logos that remain stationary on the TV screen These logos are common on many programmes received via a Set top Box To reduce this risk avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retenti ion Always endeavour to avoid black borders top or bottom by using the zoom function This will help eliminate the black borders and fit the picture to the entire area of the screen Using a video game console may cause image retention and is not recommended When using a PC input avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture amp IMPORTANT Image retention issues are not covered by your Samsung warranty Securing t
59. e Ticker application the may have different service or not be supported Channel Bound Service Off On Some channels support applications as an Internet data service allowing you to access the Internet service while watching TV amp Only available if supported by the broadcaster Change the Service Lock password amp Q amp The default password set is 0 0 0 0 amp f you forget the password press the following sequence of remote control buttons to reset the password to 0 0 0 0 POWER off MUTE 8 2 gt 4 POWER on Reset Resets Internet TV settings to factory default settings Internet TV ID You can use this menu when creating deleting the account You can control your account including contents site s account information Account is only for internet TV Create Create an account and link it with desired service applications amp NOTE e Account will be made less than 10 soinyee4 peoueapy vo e Maximum number of characters is 8 Manager Service Site Register login information for service sites Change Password Change account password Delete Delete the account Service Manager Delete and lock applications installed to Internet TV Lock Lock the application amp Accessing a locked application requires the password Delete Delete the application Properties Display information about Internet TV Use the Check the speed of your internet connection
60. e type H Dynamic Suitable for a bright room H Standard Suitable for a normal environment HB Natural Suitable for reducing eye strain amp Natural is not available in PC mode H Movie Suitable for watching movies in a dark room fl Adjusting Picture Settings Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control amp NOTE In analogue TV Ext AV modes of the PAL system the Tint G R function is not available In PC mode you can only make changes to Backlight Contrast and Brightness e Settings can be adjusted and stored for each external device connected to the TV a Economical Solutions Eco Solution E Energy Saving Off Low Medium High Picture Off Auto G ESEFA This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E Eco Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room Q it you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco sensor is On the minimum screen brightness can be adjusted manually If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light
61. eactivation code When Divx VOD is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to view information about the connected device English 43 Advanced Features What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it To connect to a Samsung Home Theatre Anynet Anynet Device Home Theatre Device 1 234 TV Rear Panel _O DIGTALAUDIOIN HDMI OUT HDMI IN BS Optical Adapter Optical Cable H HDMI Cable HDMI Cable HDMI Cable 2 ARC j D Sm H D 1 Connect the HDMI IN 1 DVI 2 ARC 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable amp NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre The ARC funct
62. ean Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that he batteries in this product should not be disposed of with other household waste at the end of their working life Where marked he chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 6 2 English A AllShare Amplify Antenna Anynet AUDIO OUT Auto Adjustment Auto Volume B Background Music Balance L R Basic View Batteries Black Tone Blanking Bracket Brightness C Cable Tie Change PIN Channel Manager Channel Menu Clock Colour Tone Component Connecting to a PC Connecting to an Audio Device D DIGITAL AUDIO OUT Divx VOD D sub Dynamic Dynamic Contrast E Eco Sensor Edit Name Editing Channels Energy Saving 10 51 21 14 44 10 21 22 43 21 42 16 55 16 54 24 13 14 23 17 27 10 44 43 27 16 16 16 11 15 16 EPG Electronic Programme Guide 12 Equalizer External Speaker 21 22 F Fine Tune Flesh Tone Frequency H HDMI Headpho
63. echwin MJPEG is supported Supports up to WMA 7 8 9 STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio WMA sampling rate 22050Hz mono is not supported Playing recorded TV or movie file continuously Resume Play If you exit the playing Recorded TV or Videos function it can be played later from the point where it was stopped W if you press the ENTERC button Chaptering during playing the file you can explore scene divided into 5 chapters you want amp If the index information is damaged or unsupported you will not be able to use the Chaptering function 1 Select the movie file you want to play continuously by pressing the lt or gt button to select it from the file list section 2 Press the gt Play ENTER C button 3 Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped The Blue button is available when resuming play amp Ifthe Cont movie play help function is set to On in the Settings menu a pop up message will appear when you resume play a movie file 40 English D Play continuously l Resumes playing from the last viewed Sk sum ID Play continuously 4 Chaptering lt gt Jump 4 Tools D Return Music Playing Music 1 Press the lt or gt button to select Music then press the ENTER C button in the Media Play menu
64. eletext mode with the current broadcasting screen Press it one more time to exit teletext E store Stores the Teletext pages amp size Displays the teletext on the upper half of the screen in double size To move the text to he lower half of the screen press it again For normal display press it once again hold Holds the display at he current page in the case that here are several secondary pages hat follow automaticially To undo press it again Colour buttons red green yellow blue If the FASTEXT system is used by the broadcasting company the different topics on a Teletext page are colour coded and can be selected by pressing the coloured buttons Press the colour corresponding to the topic of your choice A new colour coded page is displayed Items can be selected in the same way To display the previous or next page press the corresponding coloured button Q mode Selects the Teletext mode LIST FLOF If pressed during LIST mode switches the mode to List save mode In List save mode you can save a Teletext page into a list using the E9 store button Q sub page Displays the available sub page POWER SOURCE ON OFF O Ho o 1 2 3 4 5 6 7 8 9 TTXIMIX PRE CH O ee 0 MUTE 8 0 a P aust v B O o 8 CONTENT MENU euE L ey 2 m amp i TOOLS amp INFO D fa t gt RETURN EXIT Oo
65. els in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme Available only when the Input source is set to TV Parental Lock depending on the country Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code If the selected channel is locked the f symbol will be displayed Allow All Unlock all TV ratings E Change PIN Change your personal ID number required to set up the TV A amp A it you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER off gt MUTE 8 gt 2 gt 4 POWER on a Other Features Language HM Menu Language Set the menu language E Teletext Language Set a desired language for teletext amp English is the default in cases where the selected language is unavailable in the broadcast E Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected Subtitle Use this menu to set the Subtitle mode H Subtitle Off On Switches subtitles on or off SUBT E Mode Normal Hearing Impaired Sets the subtitle mode 2 H Subtitle Language Sets the subtitle language ifthe programme you ar
66. ency Bandwidth amp When selecting Antenna Cable Frequency Modulation Symbol Rate H Analogue Channel Programme Colour System Sound System Channel Search If there is abnormal sound or no sound reselect the sound standard required amp Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel ii Editing Channels Channel Manager Option Menu in Channel Manager 1 Select a channel and press the TOOLS button 2 Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu E Edit Channel Name analogue channels only Assign your own channel name E Edit Channel Number digital channels only Edit the number by pressing the number buttons desired fi Other Features Cable Search Option depending on the country Sets additional search options such as the frequency and symbol rate for a cable network search E Freq Start Freq Stop Set the start or stop frequency differs in each country E Symbol Rate Displays available symbol rates H Modulation Displays available modulation values Channel Manager Channel Manager
67. etwork screen select Network Type Set Network Type to Wireless 6 Select Network Setup The Network Setup screen appears e English 3 1 Advanced Features Select a Network Not Selected gt Internet Protocol Setup Auto IP Address BEE Subnet Mask HEE Gateway HEE DNS Auto DNS Server HEE A PBC WPS Move CC Enter 5 Return 7 Press the Red button on your remote Press the PBC WPS button on your router within 2 minutes Your TV player automatically acquires all the network setting values it needs and connects to your network 9 After the network connection is set up press the RETURN button to exit the Network Setup screen Network Setup Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process How to set up automatically To set up the wireless connection automatically follow these steps 1 Follow Steps 1 through 6 in the How to set up using PBC WPS p 31 2 Press the W button
68. f the TV put the screws into the clamps and then fasten the screws onto the TV again Q Screws may not be supplied with the product In this case please purchase the screws of the following specifications Screw Specifications e Fora 19 22 inches M4 re he For a 23 65 inches M8 e 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall w with a strong cable and then tie the string tightly V amp NOTE E Wall Cr Install the TV near to the wall so that it does not fall backwards e It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV e Untie the string before moving the TV 4 Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer English 57 Other Information If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Solutions and Explanations Picture Quality The TV image does not look as good as it did in the store First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self
69. g 5 1 CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theatre amp Headphones K You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Sound function may be restricted when connecting headphones to the TV Headphone volume and TV volume are adjusted separately amp AUDIO OUT Connects to the audio input jacks on your amplifier DVD home theatre e When connecting use the appropriate connector e When an audio amplifier is connected to the AUDIO OUT jacks Decrease the volume of the TV and adjust the volume level with the amplifier s volume control 10 English CONNECTIONS COMMON INTERFACE Slot To watch paid channels the Cl or Cl CARD must be inserted If you don t insert the Cl or Cl CARD some channels will display the message Scrambled Sig
70. g on the model Contact with objects other than your finger may switch on the LED touchpad Power Indicator Remote control sensor J SAMSUNG SOURCE s MENU eS Speakers Power Indicator Blinks and turns off when the power is on and lights up in standby mode Remote control sensor Aim the remote control towards this spot on the TV SOURCE Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features Adjusts the volume In the OSD use the a buttons as you would use the lt and gt buttons on the remote control V CHA Changes the channels In the OSD use the W CH A buttons as you would use the Y and A buttons on the remote control Power Turns the TV on or off Standby mode LO peyeys uag Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord English 5 Getting Started Viewing the Remote Control Displays and selects the available video sources p 11 Turns the TV on and off POWER SOURCE ON OFF 2 E 0 _ Turns the remote control light on or off When on the
71. gramme E Sort analogue channels only This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store HM Delete You can delete a channel to display the channels you want E Select All Deselect All Select all the channels or deselect all the selected channels in the channel manager Channel List Transfer The PIN input screen appears Enter your 4 digit PIN number Imports or exports the channel map You should connect a USB storage to use this function E Import from USB Import channel list from USB H Export to USB Export channel list to USB this function is available when USB is connected Scheduled in Channel Manager You can view modify or delete a show you have reserved to watch E Change Info Change a show you have reserved to watch E Cancel Schedules Cancel a show you have reserved to watch E Information Display a show you have reserved to watch You can also change the reservation information Select All Deselect All Select or deselect all reserved programmes Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually amp Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset English 1 5 s n e y seg 0 Basic Features Changing the Preset Picture Mode Mode Select your preferred pictur
72. he Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product amp When using a stand or wall mount use parts provided by Samsung Electronics only e Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp The appearance may differ depending on the product 2 Installation with a stand Installation with a wall mount 10cm 10 cm 10cm English Contents Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug amp Play Initial Setup Getting Started NN ODO R A Connections 8 Connecting to an AV Device 10 Connecting to an Audio Device 11 Changing the Input Source Basic Features 12 How to Navigate Menus 12 Using the INFO button Now amp Next guide 12 Planning Your Viewing 14 Channel Menu 16 Picture Menu 21 Sound Menu 23 Setup Menu 25 Support Menu Advanced Features 27 Connecting to a PC 28 Network Connection 35 Media Play 44 Anynet 48 Internet TV 51 AllShare Other Information 53 Analogue Channel Teletext Feature 54 Assembling the Cables 55 Installing the Wall Mount 57 Anti theft Kensington Lock 57 Securing the TV to the wa
73. he OSK On Screen Keyboard ee On Media On ScreenShare On BB ScreenShare TV name C Select D Return i Exit A Message Media ScreenShare Shows a list of mobile phones or connected devices which have been set up with this TV for using the Message Media or ScreenShare function amp The Media function is available in all mobile devices which support AllShare E Allowed Denied Allows Blocks the mobile phone H Delete Deletes the mobile phone from the list This function only deletes the name of the mobile from the list If the deleted mobile device is turned on or trys to connect to the TV it may appear on the list again Using the Message Function Using this function you view call arrivals SMS messages and schedules set on the mobile phone through the alarm window while watching TV NOTE To disable the alarm window set Message to Off in Setup of AllShare If OK is selected or if OK is not selected after the message has appeared three times the message will be deleted The message is not deleted from the mobile phone The alarm window can be displayed while using some applications such as Media Play etc To view the contents of a message switch to TV viewing mode e When a message from an unknown mobile phone is displayed select the mobile phone on the message menu in AllShare and select Denied to block the phone Message View If a new SMS message arrives while y
74. he TV e If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e If you are using a DVI to HDMI cable a separate audio cable is required e If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise e Check the cable connections Make sure a video cable is not connected to an audio input e For antenna or cable connections check the signal strength Low signal level may cause sound distortion No Picture No Video The TV won t turn on The TV turns off automatically e Make sure the AC power cord is securely plugged in to the wall outlet and the TV e Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the Setup menu p 23 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal 58 English Issues Solutions and Explanations There is no picture Video Check cable connections remove and reconnect all cables c
75. he common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture amp This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product 60 English Licence s Q Sg S fS TheaterSound SRS and the symbol are trademarks of SRS Labs Inc D TheaterSound TheaterSound technology is incorporated under licence from SRS Lab Inc 3 3 2 S XJ DOLBY anufactured under licence from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE anufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are 2 0 Digital Out registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trade
76. his function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function technology SRS TruDialog Off On standard sound mode only This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly English 21 Basic Features Audio Language digital channels only Change the default value for audio languages amp The available language may differ depending on the broadcast Audio Format digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function amp Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable Audio Description not available in all locations digital channels only AD This function handles the Audio Stream for the AD Audio Description which is 7 sent along with the Main audio from the broadcaster H Audio Description Off On Turn the audio description function on or off H Volume Adjust the audio description volume Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal E Night This mode provides
77. ia Play are shown in 2D 3D mode only e Ifyou lie on your side while watching TV with 3D active glasses the picture may look dark or may not be visible e Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures Otherwise you may not be able to enjoy proper 3D effects e The ideal viewing distance should be three times or more the height of the screen We recommend sitting with viewer s eyes on a level with the screen Picture Reset OK Cancel Resets your current picture mode to its default settings i Setting up the TV with Your PC Set the input source to PC Auto Adjustment Adjust frequency values positions and fine tune the settings automatically Q Not available when connecting with an HDMI DVI cable Screen E Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen H Position Adjust the PC screen position with direction button A V lt 4 P E Image Reset Resets the image to default settings Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ in which case the same basic set up infor
78. ial order Vv Vv Vv Vv C s sorts and displays the file by preference You can change the file preference Lg Preference in the file list section using the Green button x v ry M a Latest Date sorts and shows files by latest date Vv Vv Vv S Earliest Date sorts and shows files by earliest date Vv Vv Vv Artist sorts the music file by artist in alphabetical Vv E Album sorts the music file by album in alphabetical order Vv E Genre sorts music files by the genre Vv 8 y the g Mood sorts music files by the mood You can change the music mood information Vv sorts and shows photo files by month It sorts only by month from January Z Monthly o December regardless of year y hd Channel sorts the recorded files by channel name Vv y 42 English Using the Setup Menu E Background Setting Select to display the background you want Recorded TV Videos Music Photos Play Option menu Q During playing a file press the TOOLS button Category Operations Recorded TV Videos Music Photos Title You can move the other file directly Vv Vv S Repeat Mode You can play recorded tv movie and music files repeatedly Vv Vv Vv A Picture Size You can adjust the picture size for preference Vv Vv nm Picture Setting You can adjust the picture setting p 16 21 Vv Vv Vv S Sound Setting You can adjust the sound setting p 21 22 Vv Vv Vv Vv 5 Subtitle Setting You
79. ildren e Do not install the product in an unstable location such as a shaky self a slanted floor or a location exposed to vibration e Do not drop or impart any shock to the product If the product is damaged disconnect the power cord and contact a service centre WARNING TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES Wiring the Mains Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitably approved extension lead or consult your dealer for assistance However if there is no alternative but to cut off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LI
80. ing for Samsung recorders that support the Anynet TimeShift and PVR features OOc SAMSUNG Installing batteries Battery size AAA amp NOTE e Use the remote control within 23 feet from the TV Bright light may affect the performance of the remote control Avoid using nearby special fluorescent light or neon signs The colour and shape may vary depending on the model ta enanenntt 6 English When the TV is initially powered on basic settings proceed automatically Q Preset Connecting the mains and antenna When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV amp To return to the previous step press the Red button 1 2 0O amp Oo ON OD Selecting a language Selecting Store Demo or Home Use Selecting a country Selecting an antenna Selecting a channel Setting the Clock Mode Time Zone Viewing the HD Connection Guide Enjoy your TV LO Connecting to an Antenna VHF UHF Antenna peueys uag ANTIN o Plug amp Play Initial Setup Press the A or Y button then press the ENTER C button POWER Select the desired OSD On Screen Display language Press the lt or gt button then press the ENTER C button e Select the Home Use mode Store Demo mode is
81. intensity 1 6 English E No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal amp Disabled when the PC is in power saving mode D Changing the Picture Options Advanced Settings available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast in PC mode you can only make changes to Dynamic Contrast Gamma White Balance and LED Motion Plus Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail 1 2 Gamma 0 Expert Pattern Off RGB Only Mode Off Colour Space Native v Move C Enter 5 Return E Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Dynamic Contrast Off Low Medium High Adjust the screen contrast E Shadow Detail 2 2 Increase the brightness of dark images E Gamma Adjust the primary colour intensity E Expert Pattern Off Pattern1 Pattern2 By running the Expert Pattern function the picture can be calibrated without a generator or filter If the OSD menu disappears or a menu other than the Picture menu is opened the calibration is saved and the Expert Pattern window disappears amp while the Expert Pattern is running sound is not outputted amp Only enabled on DTV Component HDMI models amp Disa
82. ion enables digital output of sound using the HDMI IN 2 ARC port and can only be operated when the TV is connected to an audio receiver that supports the ARC function When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV e You can connect only one Home Theatre e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions e Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type 44 English Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list device_name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear
83. ity The services and availability of content through Internet TV are subject to change from time to time without prior notice 50 English About AllShare AllShare connects your TV mobile phones and other devices which are compatible through a network On your TV you can view call arrivals SMS messages and schedules set on your mobile phones In addition you can play media contents including videos photos and music saved on your mobile phones or the other devices such as your PC by controlling them on the TV via the network Additionally you can use your TV as a monitor for your mobile when browsing a web page amp For more information visit www samsung com or contact the Samsung call centre Mobile devices may need additional software installation For details refer to each device s user s guide Setting Up AllShare Setup E Message On Off Enables or disables the message function for call arrivals SMS messages and schedules set on your mobile phones E Media On Off Enables or disables the media function When the media function is on it plays videos photos and music from a mobile phone or other device that supports AllShare E ScreenShare On Off Enables or disables the ScreenShare function for using mobile phone as a remote control E TV name Sets the TV name so you can find it easily on a mobile device A amp A f you select User Input you can type on the TV using t
84. k some static and ghosting may appear Select one of the options until the best picture is displayed Auto Visualisation When changing analogue channels displays the intensity of the current signal and defines the screen noise filter Qy Only available for analogue channels E MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality H HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in AV COMPONENT 480i 1080 and HDMI 480i 1080 H Motion Plus Off Clear Standard Smooth Custom Demo Removes drag from fast scenes with a lot of movement to provide a clearer picture amp Q If noise occurs on the screen please set up the Motion Plus to Off If Motion Plus is Custom you can set up the Blur Reduction Judder Reduction or Reset manually amp If Motion Plus is Demo you can compare the difference of on and off modes Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films Reset Reset the custom settings H Auto Protection Time 10 min 20 min 40 min 1 hour Off If the s
85. kes clear his views on marriage Channel View LY Today 18 00 19 00 a 27 Discovery American Chopper 28 DiscoveryH amp L Programmes resume at 06 00 800 five Home and Family Affairs Fiv Dark Angel 24 price drop tv No Information 16 avc QVC Selection v6 R4DTT No Information 19 00 20 00 Tine Team View Mode E 24 Hours Bi Ch Mode Information Page C4 Watch Using Scheduled View DTV Air 800 five Family Affairs 18 00 18 30 Drama Tanya confesses all to a stunned Babs Conrad is anxious to hear 18 30 Today 19 15 Today 0 Red View Mode View the list of programmes that are playing now or coming up Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours Blue Ch Mode Select the type of channels you want to display on the Channel View window All TV Radio Data Other My Channel 1 4 Information Displays details of the selected programme gt Page Move to next or previous page ENTER C4 button When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTER C button again and select Cancel Schedules O Channel Manager Delete or set favourites channels and use the programme guide for digital broadcasts Select a channel in the Channel
86. le formatting is in progress If you format the device all files will be deleted amp Before formatting your device to the tv please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Playing Recorded TV Programme 1 Press the lt or gt button to select Recorded TV then press D the ENTER C button in the Media Play menu TASIRI 2 Press the lt 4 gt A Y button to select the desired file in the file Se list 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing me 3 D Play continuously 3 During playing the recorded TV programme you can search ACTS Resumes playing om he last vied A using the lt and gt button O 00 04 03 00 07 38 ip sum IB Section Repeat I Play continuously C4 Chaptering lt gt Jump 42 Tools Operation Buttons E Green Section Repeat You can set up the fuction to repeat some section You can also watch some section you want to English 37 soinjea4 paoueapy vo Advanced Features Using the Timeshift Mode function If you missed a live broadcast you can see from the recorded broadcast using this feature When the Timeshift Mode is set to Auto the TV stores the channel you watch currently to record automatically When the Timeshift Mode is set to Manual if you press the gt Play button the TV stores the channel from the
87. ll 58 Troubleshooting 62 Specifications 63 Index Warning Important Safety Instructions Wiring the Mains Power Supply Plug UK Only Warranty Card Check the Symbol Q This function can be used by One Touch Button pressing the TOOLS button on the remote control English 3 Getting Started Accessories amp Please make sure the following items are included with your LED TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models amp Cables not included in the package contents can be purchased separately A CAUTION INSERT SECURELY LEST SHOULD BE DETACHED IN SET e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Owner s Instructions e Quick Setup Guide A e Blanking Bracket t e Cable Tie me e LAN Adapter b a e PC Adapter See separate guide for installing the stand e Stand 1EA Q e Holder Ring 4EA e Holder Wire EA he al e Antenna Adapter e Component Adapter e Guide Stand 1EA z e Holder Wire stand e SCART Adapter 2EA a e Optical Adapter ou TD aes e AV Adapter W wax l12 e Screws 9EA amp For best cable connection to this product be sure to use cables with a maximum thickness as below Maximum thickness 0 55 inches 14mm 4 English Viewing the Control Panel The product colour and shape may vary dependin
88. marks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivxX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 GUIDE Plus Trademark Licence Patent Notice IDEF GUIDE Plus is 1 a registered trademark or trademark of 2 manufactured under licence from and 3 subject of various international patents and patent applications owned by or licensed to GEMSTAR Gemstar TV Guide International Inc and or its related affiliates GUIDE Plus Legal Notice GEMSTAR TV GUIDE INTERNATIONAL INC AND OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS SYSTEM IN NO EVENT SHALL GEMSTAR TV GUIDE INTERNATIONAL INC AND OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS LOSS OF BUSINESS O
89. mation will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear 3 Click on Display and a display dialog box will appear 4 Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e fa vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box D Changing the Preset Sound Mode SRS TheaterSound E Standard Selects the normal sound mode soinyeo4 olseg 0 Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired D Adjusting Sound Settings Equalizer Adjusts the sound mode standard sound mode only E Balance L R Adjusts the balance between the right and left speaker HM 100Hz 300HZ 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies H Reset Resets the equalizer to its default settings Sound Systems Etc SRS TruSurround HD Off On standard sound mode only T
90. nal The pairing information containing a telephone number the Cl or Cl CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated NOTE Changing the Input Source Source List Use to select TV or an external input sources such as a DVD Blu ray player cable box STB satellite receiver e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it If you have any problems please contact a service provider seen Insert the CI or Cl CARD in the direction marked on the card The location of the COMMON INTERFACE slot may be different depending on the model Cl or Cl CARD is not supported in some countries and regions check with your authorized dealer suoloeuu0D Z0 Insert the Cl or Cl CARD that supports the current antenna settings The screen will be distorted or will not be Edit Name E VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name SOURCE 2 TV Ext 1 Ext 2 PC AV 2
91. nes Home Theatre Installation Space Internet TV L Language Licence Lock M Media Play Melody Menu Transparency Music N Navigate Network Connection Network Setup Now amp Next guide O ON OFF button Optimal resolution P Password Photos Picture Size PIP Picture in Picture Plug amp Play Power Indicator 15 17 14 10 10 44 48 24 61 15 35 25 25 41 12 28 29 12 27 49 41 17 43 25 R Receiver Recording Remote Control Repeat Mode RGB Only Mode Rotate S Select All Self Diagnosis Sharpness Signal Information Sleep Timer Slide Show Software Upgrade Source List Speaker Select Specifications Standby mode Subtitle Symbol T Timer Title Tools Troubleshooting TV Speaker U USB Drive Using Channel View Using Scheduled View 46 46 43 16 43 15 25 16 25 23 41 26 11 22 62 24 23 42 58 22 26 35 12 13 Using the Favourite Channels 13 V VCR Video Formats Videos Volume W Wall Mount Warm White Balance 39 39 55 17 17 English 63 UOHEULOJU 194 O 90 Warning Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product CAUTION This symbol indicates that high voltage is present inside It is dangerous to make any kind Eee ate eas CAUTION TO REDUCE THE RISK OF ELECTRIC
92. nnection p 25 The TV is tilted to the side oO Remove the base stand from the TV and reassemble it The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected Your settings are lost after 30 minutes or every time the TV is turned off You have intermittent loss of audio or video If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU Setup Plug amp Play Initial setup gt ENTER C p 7 Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look Closely at the edge of the frame of the TV This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source p 25 The message Scramble signal or Weak Signal No Signal appears You turned the TV off 45 minutes ago and it turned on again If you are using a CAM CARD CI Cl check that it is installed into t
93. o set up using PBC WPS p 31 2 Select SWL Samsung Wireless Link by using the Y button and press the ENTER C button to turn it On 3 Select SWL connect by using the Y button and press the ENTER C button 4 lf the Press the PBC button on the PBC WPS supported device to connect within 120 seconds message appears press the PBC button on the device to connect For more information refer to the wireless network setup manual of the device to be connected 5 If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically amp Ifthe connection fails please retry after 2 minutes 34 English If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or p
94. onnected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connect to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection The TV is not receiving all channels Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU Setup Plug amp Play Initial setup and wait for all available channels to be stored p 7 Verify the Antenna is positioned correctly The picture is distorted macro block error small block dots pixelization Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue PC Connection A Mode Not Supported message appears Set your PC s output resolution and frequency so they match the resolutions supported by the TV p 27 PC is always shown on the source list even if a PC is not connected This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio
95. ou are watching TV the alarm window appears If you click the OK button the contents of the message are displayed amp You can configure the viewing settings for SMS messages on your mobile phones For the procedures refer to the mobile phone manual Some types of characters may be displayed as blank or broken characters English 5 1 sainyee4 peoueapy vo Advanced Features Call Arrival Alarm If a call arrives while you are watching TV the alarm window appears Schedule Alarm While you are watching TV the alarm window appears to display the registered event amp You can configure viewing settings for schedule contents on your mobile phones For the procedures refer to the mobile phone manual Q Some special characters may be displayed as blank or broken characters Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played NOTE e If the media function executes for the first time the warning popup window appears Press the ENTERC button to select Allow then you can use Media function on that device Unknown Device 0 is requesting that the media file be allowed to play If you wish to allow
96. ound Music is set to On amp The BGM Mode cannot be changed until the BGM has finished loading gt Normal 4 Pause lt p gt Previous Next 42 Tools 5 Return English 41 soinjea4 paoueapy vo Advanced Features D Playing the Multiple Files Playing the selected recorded TV video music photo files 1 Press the Yellow button in the file list to select the desired file s 2 Repeat the above operation to select multiple files m Movie 02 avi amp NOTE The v mark appears to the left of the selected files e To cancel a selection press the Yellow button again To deselect all selected files press the TOOLS button and select Deselect All 3 Press the TOOLS button and select Play Selected Contents E SUM JA Change Device Select ID Sorting 421 Tools D e Videos IMovie 01 avi 2 files selected 1 1 Page Jan 10 2010 Jan 10 2010 Jan 10 2010 Playing the recorded TV video music photo file group 1 While a file list is displayed move to the any file in desired group 2 Press the TOOLS button and select Play Current Group fi Media Play Additional Function Sorting the file list Press the Blue button in the file list to sort the files Category Operations Recorded TV Videos Music Photos SD Basic View shows whole folder You can view the photo by selecting the folder Vv Vv Vv Title sorts and displays the file title in Symbol Number Alphabet Spec
97. point of view you want to record NOTE Recorded videos are DRM digital rights management protected and cannot be played on a PC or other TVs nor can they be played when the main board of the TV is changed Data broadcasts cannot be recorded The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the free space on the hard disk drive If you press the A or W button you can see the current channel being on air or can see the start point the recorded broadcast The Timeshift Mode operates for a maximum of 90 minutes After the Timeshift Mode function has run for the maximum time the time information will be fixed to 00 00 00 Note that if you have paused the recording the TV will automatically resume playback If the 5 free memory space limit of the USB storage device is reached the current recording process will be closed When recording is performed by both the PVR Personal Video Recorder function and a device that supports the HDMI CEC feature recording by the PVR function takes precedence During a playback or the Timeshift Mode the picture will be displayed according to the display settings of the TV If you change the input source during recording the screen will go blank until the change is completed An application which supports neither the recording nor the Timeshift Mode function will close automatically if you try to use it during eithe
98. pplications and Internet TV settings amp The colour buttons may work differently depending on the application 48 English Account Login For a application with multiple account use lt and gt to access the different account Login Password a Al Create 0 9 Enter PIN gt Cancel amp For a more enjoyable application experience register and log in to your account amp For instructions on creating an account refer to Settings Internet TV ID Create 1 Press the Red button in Internet TV home page 2 Select desired User account then press the ENTER Ce button A f you want create account press Red button then create account OSD window appear 3 Enter the Password Q When login succeeds User account will be displayed on the screen D Setting up Internet TV Settings Create IDs and configure Internet TV settings from this screen Highlight Settings using A and Y buttons and press the ENTERC button Settings Ticker Autorun Off Internet TV ID Channel Bound Service _ Off Service Manager Change the Service Lock password Properties Reset System Setup Ticker Autorun Off On Enable disable ticker autorun upon powering on the TV amp Q The Ticker application provides useful News Weather and Stock Market information The Ticker application on Internet TV must be downloaded to use this feature amp Depending on your country th
99. r function A message may appear in front of the application window indicating that the recording or the Timeshift Mode function is closed Timeshift Mode function is not supported for analogue channels The recording and the Timeshift Mode functions are disabled for channels locked with Child Lock If the USB device has failed the Device Performance Test the USB device must go through the Device Format and Device Performance Test again before you record with the Guide or Channel Manager The recording and Timeshif Modet functions can only be used with a USB storage device that completed the Device Performance Test f you attempt the recording or Timeshift Mode function with a device that did not have the Device Performance Test the function will not start f you press REC on the remote control while the Channel Manager screen is being displayed or record with Timer Recording the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command f a USB device dedicated to recording is connected existing Timeshift Mode or recording files that were saved abnormally will automatically be deleted f you switch to external input mode during recording the recording will continue but the Le REC button will be disabled f any function that turns off the TV Sleep Timer Off timer etc is set for a time that conflicts with recording the TV will be turned off once the recording is comple
100. r on the TV Also in phone book you can make a call to other person or can send to SMS NOTE In Samsung mobile ScreenShare must be installed and the supporting application must be executed then you can use the ScreenShare function e Available buttons on your remote control may vary for each page Doc Viewer can read files in doc format but cannot modify them e The screen display may differ depending on the connected device o See AE Contacts Calendar Doc Viewer CG Select Ml Return Using your Samsung phone to control your TV Simply Before you can use this feature you must connect to a Samsung mobile phone that supports ScreenShare functions When operating the TV with your mobile phone only the POWER wa PAA Y and MUTE buttons are supported Even if you keep pressing down on a control button channel or volume on the mobile phone the value will only go up or down by one unit Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control o0 a Teletext on mix off Activates the Teletext mode for the current channel Press the button twice to overlap the T
101. r values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another 5 When done press the RETURN button on your remote 6 Select Network Test to check the Internet connectivity English 29 soinyee4 peoueapy vo Advanced Features D Connecting to a Wireless Network To connect your TV to your network wirelessly you need a wireless router or modem and a Samsung Wireless LAN Adapter WISO9ABGN WISO9ABGN2 WIS10ABGN which you connect to your TV s back or side panel USB jack See the illustration below amp To use the SWL Samsung Wireless Link function connect to the USB 1 HDD port TV Rear Pane Wireless IP sharer Di The LAN Port on AP having DHCP seven the Wall c r SS OS NI NI Samsung Wireless LAN Adapter LAN Cable Samsung s Wireless LAN adapter is sold separately and is offered by select retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11A B G and N communication protocols Samsung recommends using IEEE 802 11N When you play the video over a IEEE 802 11B G connection the video may not play smoothly amp NOTE You must use the Samsung Wireless LAN Adapter WISOSABGN WISOSABGN2 WISIOABGN to use a wireless network Samsung s Wireless LAN adapter is sold separately The Samsung Wireless LAN adapter is offered by select retailers Ecommerce
102. reless LAN Adapter is established the pop up window appears As soon as a connection is established place the AP in parallel with the Samsung Wireless LAN Adapter giving a gap no larger than 25cm Method 2 Connect via an extension cable The Samsung Wireless LAN Adapter should be installed in an interference free area in order to avoid interference between the adapter and tuner soinjee4 peoueapy vo 4 Wait until the connection is automatically established W it Samsung Auto Configuration does not connect your TV to your AP a pop up window appears on the screen notifying you of the failure Reset the AP and then try again If the connection fails again choose one of the other connection setup methods PBC WPS auto or manual 5 After the connection is established locate the sharer at the desired location ifthe AP settings have been changed or it is the first time you use the new AP after purchase you need to set up again beginning from Step 1 Network Setup PBC WPS How to set up using PBC WPS If your router has a PBC WPS button follow these steps 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the A or VW button to select Setup and then press the ENTER C button 3 Use the A or button to select Network in the Setup menu and then press the ENTER C button On the N
103. removing the power cord make sure to hold the power plug when pulling the plug from the outlet Do not touch the power cord with wet hands e If this apparatus does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service centre e Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time especially when children elderly or disabled people will be left alone in the house Accumulated dust can cause an electric shock an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate e Be sure to contact an authorized service centre when installing your set in a location with heavy dust high or low temperatures high humidity chemical substances and where it operates for 24 hours such as the airport the train station etc Failure to do so may cause serious damage to your set e Use only a properly grounded plug and receptacle An improper ground may cause electric shock or equipment damage Class Equipment only e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e Do not allow children to hang onto the product e Store the accessories battery etc in a location safely out of the reach of ch
104. res like EPG Electric Programme Guide VOD Video On Demand and so on are not included in this specification So they cannot be workable at this moment latest DVB T and DVB C standards as of August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you may nd conditions of their business Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with some cable service providers For more information please contact your local Samsung customer care centre amp The reception quality of TV may be affected due to differences in broadcasting method between the countries Please check the TV SAMSUNG Authorized Dealer or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or Still image warning Avoid displaying still images like joeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of LED screen which will affect image quality To reduce risk of this effect please follow below recommendations Avoid displaying the same TV channel for long periods Always try do display any image on full screen us
105. rs It will have only memorised the point where the most recent user stopped playing e The lt or gt button may not work depending on the content information You may experience file stuttering while playing a video in Media Play through a network connection Ait might not work properly with unlicenced multimedia files Need to Know List before using Media Play MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated port USB 1 HDD port Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels e For unsupported or corrupted files the Not Supported File Format message is displayed e If the files are sorted by Basic View up to 1000 files can be displayed in ea
106. s My Channels or Scheduled screen v1 tfutech 240re tv sjeuuey9 Radio 3 BBC World Data Other 23 bid up tv Analogue 33 Boonerang 32 Cartoon Nwk 5 Class News 4 Coming Soon 27 Discovery W Antenna E Zoom W Select Sort Page 2 Tools E Channels Shows the channel list according to channel type m Y My Channels Shows the group of the channel E Scheduled Shows all the currently reserved programmes QB Using the colour buttons with the Channel Manager D Red Antenna Toggle among Air or Cable E Green Zoom Enlarges or shrinks a channel number E Yellow Select Select desired channels and press the Yellow button to set all the selected channels at the same time The WY mark appears to the left of the selected channels O Blue Sort Change the list ordered by channel name or channel number s ne y olseg 0 e gt Page Move to next or previous page AJ Tools Displays the Channel Manager option menu The options menus may differ depending on the situation Channel Status Display Icons Icons Operations A An analogue channel WA A channel selected Y A channel set as a Favourite am A programme currently being broadcast e A locked channel A reserved programme Guide Type Samsung Guide Plus depending on the country You can select a different type of Guide E Samsung Uses the guide programme by provided
107. samsung HM Guide Plus Uses the guide programme provided by Rovi International Solutions For more information refer to www europe guideplus com a Using Favourite Channels My Channels in Channel Manager Shows all favourite channels E Edit My Channels J You can set the selected channels to desired my channels group The Y symbol will be displayed and the channel will be set as a my channel 1 Select a channel and press the TOOLS button 2 Add or delete a channel in the my channel groups you want among 1 2 3 and 4 One or more groups can be selected English 13 Basic Features 3 After you have changed the settings the channel list for each group can be viewed in my channels v1 futech All 2 24o0re tv Edit My Channels A Lock gjeuueyg Radio Data Other Analogue 23 Timer Viewing Timer Recording Edit Channel Number Delete f Coming Soon Discovery Channel List You can see all the channels searched Channel Menu il Retuning Channels Antenna Air Cable Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system Country The PIN input screen appears Enter your 4 digit PIN number E Digital Channel Change the country for digital channels H Analogue Channel Change the country for analogue channels Auto Store Scans for
108. sented with the original invoice or sales slip or confirmation and the serial number on the product has not been defaced 2 Samsung s obligations are limited to the repair or at its discretion replacement of the product or the defective part 3 Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres No re imbursement will be made for repairs carried out by non Samsung Dealers and any such repair work and damage to the products caused by such repair work will not be covered by this warranty 4 This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any country other than the one for which the product was originally designed and manufactured This page is intentionally left blank
109. t The wall mount kit Sold separately allows you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Preparing before installing Wall Mount Case A Installing the SAMSUNG Wall Mount Case B Installing another company s Wall Mount Ss 9 s To install a wall mount use the Holder Ring English 55 Other Information Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE e Standard dimensions for wall mount kits are shown in the table below e When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the
110. te 38 English Videos Playing Video 1 2 3 Press the lt or gt button to select Videos then press the ENTER C button in the Media Play menu Press the lt A button to select the desired file in the file list Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing time If video time information is unknown play time and progress bar are not displayed During playing the video you can search using the lt and gt button amp in this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself Supported Subtitle Formats sainjee4 peoueapy vo Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip srt string based SubViewer sub string based Micro DVD sub or txt string based C Chaptering lt gt Jump 42 Tools gt Return e Supported Video Formats File Extension Container Video Codec Resolution Kemeras P raig Audio Codec fps Mbps Divx 3 11 4 x 5 1 6 0 1920x1080 30 8 XviD 1920x1080 30 8 se P H 264 BP MP HP 1920x1080 30 25 a e a MPEG4 SP ASP 1920x1080 6 30 8 Motion JPEG 800x600 6 30 8 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 XviD 1920x1080 6 30 8 asf ASF H 264 BP MP HP 1920x1080 6 30 25 aah re ni 4
111. the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver amp NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV The TV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products Using the ARC function You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable 1 Select Receiver and set to On 2 Press the EXIT button to exit amp To use the ARC function a receiver which supports the HDMI CEC and ARC features must be connected to the HDMI IN 2 ARC port amp To disable the ARC function set the Receiver to Off Even if the TV transmits the ARC signal continuously the receiver will be blocked from receiving the signal 46 English i Troubleshooting for Anynet Problem Possible Solution Anynet does not work e Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theatre can
112. the Network screen select Network Type 5 Set Network Type to Wired Select Network Setup The Network Setup screen appears Network Setup Internet Protocol Setup Auto gt IP Address toe Subnet Mask EE Gateway se oe DNS Auto DNS Server sg oe Moe 4 Enter 5 Return 7 Set Internet Protocol Setup to Auto Auto acquires and enters the needed Internet values automatically 9 When done press the RETURN button on your remote 10 If the Network Function has not acquired the network connection values go to the directions for Manual Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen In the pop up menu that appears click Status On the dialog that appears click the Support tab On the Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 6 in the How to set up automatically procedure 2 Set Internet Protocol Setup to Manual 3 Press the Y button on your remote to go to the first entry field 4 Enter the IP Address Subnet Mask Gateway and DNS Serve
113. the media file to be played at your device please press Allow otherwise press Deny You can also change the setting or resetting of this feature at AllShare Setup Warning Please note that if your device is connected to unsecured or unfamiliar network unwanted or inappropriate contents might be played If you are not sure about the network s identity or content s appropriateness we strongly recommend that you do not Allow the request to play Allow Deny To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare setup Contents may not be played on your TV depending on their resolution and format The ENTERC and lt gt buttons may not work depending on the type of media content e Using the mobile device you can control the media playing For details refer to each mobile s user s guide e When you want to play media contents from your PC select the PC icon on the main display of AllShare Then the TV s Media Play menu automatically changes For more detail information refer to Media Play p 35 5 2 English Using ScreenShare Function Screenshare displays the same web page as provide in mobile Using ScreenShare you can open the various contents saved in a mobile phone For example the image below displays an access page for contents from a mobile You can read the mobile s various files and view the phone book and calenda
114. tion will be closed Attempt recording again The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording Others The picture won t display in full screen HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control doesn t turn the TV on or off or adjust the volume Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to the resolution settings on page 26 of this manual There is a plastic smell from the TV The TV Signal Information is unavailable in the Self Diagnostic Test menu This smell is normal and will dissipate over time This function is only available with digital channels from an Antenna RF Coax co
115. ubnet mask gateway and DNS values your TV needs to access the Internet so you don t have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses 28 English Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the A or Y button to select Setup and then press the ENTER C4 button 3 Use the A or button to select Network in the Setup menu and then press the ENTER C button The Network screen appears Network Network Type Network Setup Network Test SWL Samsung Wireless Link Off SWL connect Moe 4 Enter 5 Return On
116. uch as movies TV shows and short length videos e Sports Displays various sports media such as match information images and short length video e Game Displays various games such as sudoku and chess e Lifestyle Includes various lifestyle media services such as music personal photo management tools and social networking such as Facebook and Twitter e Information Includes various information services such as news stocks and weather e Other Includes other miscellaneous services e My Page My Page offers information about already installed applications on the TV like detailed information download contents etc It can allows delete or lock the applications e Help If you have questions about Internet TV check this section first e Jonh001 Contact amp Mother S Welcome to Skype My Video Video Call Father e brother a A Sign Out IB Online Status WB Add a contact IDI Camera Off gt Return Legal Statement Due to the various capabilities of products featuring the Samsung Internet TV Content Service as well as limitations in the available content certain features applications and services may not be available on all devices or in all territories Some features on Internet TV may also require additional peripheral devices or membership fees that are sold separately Please visit http www samsung com for more information on specific device information and content availabil
117. ust Energy Saving option in the TV menu go to MENU Picture Eco Solution Energy Saving p 16 e Try resetting the picture to view the default picture settings go to MENU Picture Picture Reset p 21 There is a dotted line on the edge of the screen the picture size is set to Screen Fit change it to 16 9 p 17 e Change cable set top box resolution The picture is black and white you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until he cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test p 25 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume The picture is good but there is no sound e Please check the volume the of external device connected to your TV e Set the Speaker Select option to TV Speaker in the sound menu p 22 e If you are using an external device make sure the audio cables are connected to the correct audio input jacks on t
118. ws digital audio to output via the HDMI IN 2 ARC port It can be enabled only when the TV is connected with an audio receiver that supports the ARC function 8 English Using a Component up to 1080p or Audio Video 480i only and Scart Cable Available devices DVD Blu ray player cable box STB satellite receiver VCR ENA AUDIO voeo ATE o R aoe ADO O COMPONENT IN L U Red Blue Green Red White Yellow J DVD Blu ray amp In Ext Ext 2 mode DTV Out supports MPEG SD Video and Audio only amp To obtain the best picture quality the Component connection is recommended over the A V connection English 9 suoloeuu0D Z0 Connections Connecting to an Audio Device Using an Optical Digital or Audio Analogue Cable or Headphone Connection Available devices digital audio system amplifier DVD home theatre ra T amplifier DVD home theatre digital audio system OPTICAL i amp DIGITAL AUDIO OUT OPTICAL When a digital audio system is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system 5 1 CH channel audio is available when the TV is connected to an external device supportin
119. y insert the Cl or Cl CARD into the CAM in the direction of the arrow 3 Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot 4 Check if you can see a picture on a scrambled signal channel Wireless Remote Control Turn wireless remote controls on or off or give permission to wireless remote controls Picture In Picture PIP PIP You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode NOTE e For PIP sound refer to the Sound Select instructions If you turn the TV off while watching in PIP mode the PIP window will disappear You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke While Internet TV is in operation the PIP function cannot be used PIP settings Main picture Sub picture Component HDMI1 DVI HDMI2 HDMI3 HDMI4 TV PC E PIP Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen E Size L MM mm Select a size for the sub picture E Position LJ L7 F 1 6 sub picture In Double WME mm selected H Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Support Menu Self Diagnosis

Samsung UE46C7000

Contents

Download Pdf Manuals

Related Search

Related Contents