Lorex VQ2121 infrared lamp
Contents
1. MODEL VQ2121 NIGHT VISION ACCESSORY Fi T E REJ g IMPORTANT IR IIluminators emit light that is not visible to the human eye as it falls on the Infrared band of the light spectrum To test that the Illuminator is emitting light point it directly at the lens of the camera the light will be visible on the System Monitor There may be a partial red glow visible on the surface of the LED which is normal THIS PACKAGE CONTAINS 1 Night Vision Accessory 1 12 V DC Power Supply 1 Metal Stand for Night g Vision NIGHT VISION WITH 24 HIGH POWERED 3 Mounting Screws INFRARED LED LAMP 3 1 Owners Manual 1 Warranty Card METAL STAND 12V DC POWER SUPPLY OWNERS MOUNTING SCREWS MANUAL WARNING REGULATED 12V DC 500mA power supply is REQUIRED for use with this camera Use of a non regulated non conforming power supply can damage this product and will void the warranty FEATURES e Weatherproof housing ideal for indoor or outdoor use e Infra red LED emitters allows user to See in the dark up to 100 ft distance e Can be used with existing LOREX B amp W observation system cameras most B amp W specialty cameras as well as shorter distance Night Vision color cameras e Clarity of the picture depends on the resolution of the camera that is used The Night Vision LEDS cover an angle of approx 50 APPLICATIONS The IR Illuminator offers and effective way of illuminating an area where l2. a non abrasive non corrosive cleaning solution Allow the unit to dry thoroughly before powering back on SPECIFICATIONS IR Turn on Level 8 lux 3 lux It s all On the web Power Requirement 12V DC Adapter 500 mA included Current Consumption IR LED OFF 12VDC 14mA IR LED ON 12VDC 500mA Operating Temperature 14 F to 113 F 10 C to 45 C Wave Length 850 NM Weatherproof IP67 Ideal for Indoor and outdoor use Weight 0 60 Ibs Dimensions W 98mm x H 92mm xD 54mm LA User Manuals Housings Black Aluminum with Bracket Cy Quick Start Guides aa Firmware Upgrades VISIT www lorexcctv com gt Product Information SPecification Sheets go Software Upgrades 4 a a APA aE AS mo TONE LLVCrS LOREX Technology Inc Copyright 2007 LOREX Technology Inc As our products are subject to continuous improvement LOREX and its subsidianes reserve the right to mod ify product design specifications and prices without notice and without incurring any obligation E amp OE
3. ow light black and white CCD Cameras or Day Night Cameras are operating in the dark general color cameras are not suitable for use with the IR Illuminator It has an automatic light sensor control When the light source is not sufficient enough the Infrared illuminator will turn on automatically INSTALLATION PLACEMENT e Plug one side of the 12V DC power supply cable into the Night Vision s DC IN jack and the other end into an electrical outlet e Place the Night Vision as close as possible next to the camera and facing the same direction as the lens Adjust the angle of the Illuminator to be horizontal with the angle of the camera e Arrange the power cord and other cables in a safe and orderly manner NOTE FOR OPTIMAL PERFORMANCE PLACE THE NIGHT VISION ACCESSORY AS CLOSE AS POSSIBLE TO THE CAMERA FUNCTION TESTING e Check that the unit has power If the light source is sufficient cover the light sensor to see if any red glow is coming from the LEDs If the surrounding area is too dark you may need to closely inspect the unit to confirm that the unit is on e If you are unable to detect that the IR Illuminator is working by using the above mentioned methods please check your monitor for illumination level If the surrounding light is too bright you may have to manually simulate night setting to see the effectiveness of the IR Illuminator CLEANING INSTRUCTIONS Unplug the unit before cleaning Use a damp cloth with
Download Pdf Manuals
Related Search