Omnitron FlexPoint 100Fx/Tx
Contents
1. c or improper site preparation or maintenance No other warranty is expressed or implied Omnitron specifically disclaims the implied warranties of merchantability and fitness for any particular purpose UTP cable Full Duplex Half Duplex Switch When the Auto Negotiation Manual switch is in Manual position the Full Duplex Half Duplex switch determines the type of duplex operation mode When the Auto Negotiation Manual switch is in Auto Negotiation position the Full Duplex Half Duplex switch advertises its setting to the device connected to the UTP port When set to Half Duplex the FlexPoint will operate in Half Duplex When set to Full Duplex factory setting the FlexPoint will operate in Full Duplex or Half Duplex depending on the features supported by the other device Half Duplex must be used when connecting to a hub Full Duplex can be used when connecting switches or between a switch and a Full Duplex workstation LED Indicators LED Color Description Power On Yellow Power applied Auto Neg Green The UTP side switch is set to Auto Negotiation position Full Duplex Green Full Duplex selected Half Duplex Green Half Duplex selected Fiber Lk Rx Green Solid Link Flashing Data received Fiber Error Red Data errors detected on fiber UTP Lk Rx Green Solid Link Flashing Data received UTP Error Red Data errors detected on UTP Exclusive Remedies The re2. d to do so by Omnitron Systems Technology Inc Caution All user required operations can be performed without opening the unit Never attempt to open or remove the cover or tamper with the unit Warranty This product is warranted to the original purchaser against defects in material and workmanship for a period of TWO YEARS from the date of shipment A LIFETIME warranty may be obtained by the original purchaser by REGISTERING this product with Omnitron within 90 days Plug In Power Unit marked Class 2 and rated at 9Vdc 1 Amp 2 This product should always be used only with Omnitron Supplied Power Unit model number 9113 PS WARNING Before inserting the Power Adapter verify that the power on the unit is appropriate for your AC line voltage source Mounting and Cable Attachment The FlexPoint 100Fx Tx can be solo mounted using a wall mounting kit or rack mounted using a 5 position shelf FlexRack 5 or a high density FlexPoint Powered Chassis Attach the FlexPoint 100Fx Tx UTP via a category 5 cable to a 100Base Tx Fast Ethernet device Attach the FlexPoint 100Fx Tx fiber via cable to a 100Base Fx Fast Ethernet device The FlexPoint transmit Tx must attach to the receive side on other device the receive Rx must attach to the transmit Switch Settings RJ45 Cross Over Switch When connecting the UTP toa hub or switch set switch to Straight Through factory setting When connecting to a workstation s
3. et it to Cross Over Auto Negotiation Manual Switch When in Manual the FlexPoint operation is selected by the Full Duplex Half Duplex switch When in Auto Negotiation factory setting the FlexPoint automatically selects Full or Half Duplex operation depending on the Full Duplex Half Duplex switch position and the features of the device connected to its from the date of shipment TO REGISTER COMPLETE AND MAIL OR FAX THE REGISTRATION PORTION OF THIS INSTRUCTION MANUAL TO THE INDICATED ADDRESS During the warranty period Omnitron will at its option repair or replace a product which is proven to be defective For warranty service the product must be sent to an Omnitron designated facility at Buyer s expense Omnitron will pay the shipping charge to return the product to Buyer s designated US address using Omnitron s standard shipping method Limitation of Warranty The foregoing warranty shall not apply to defects resulting from improper or inadequate use and or maintenance of the equipment by Buyer Buyer supplied equipment Buyer supplied interfacing unauthorized modifications or tampering with equipment including removal of equipment cover by personnel not specifically authorized and certified by Omnitron or misuse or operating outside the environmental specification of the product including but not limited to voltage ambient temperature radiation unusual dust et
4. medies provided herein are the Buyer s sole and exclusive remedies Omnitron shall not be liable for any direct indirect special incidental or consequential damages whether based on contract tort or any legal theory Form 040 04330 001E 11 07 User Warranty Registration Please register on line http www omnitron systems com or complete both sides and mail or fax this registration form to User Warranty Registration Please register on line http www omnitron systems com or complete both sides and mail or fax this registration form to Connector 100Fx Tx Omnitron Systems Technology Inc 140 Technology Drive 500 Irvine CA 92618 USA Fax 949 250 6514 Fiber Type FlexPoint Type Model Purchase Date Serial Number Purchased From Address City Name Company Address Zip Code State Country Comments and Suggestions Zip Code State City Country Fax Phone E mail Please complete both sides of this form Please complete both sides of this form
5. osr Omnitron Systems Technology Inc FlexPoint 100Fx Tx User Instructions Description The FlexPoint 100Fx Tx converts between Fast Ethernet 100Base Fx fiber and 100Base Tx twisted pair RJ45 UTP cabling It operates in Half Duplex HD or Full Duplex FD The following multimode MM and single mode SM models are described here Model Fiber Type Max Distance Connector 4330 13810nm MM 5km SC 4331 1310nm SM 30 km SC 4332 1310nm MM 5km ST 4333 1310nm SM 30 km ST 4334 1310nm SM 60 km SC 4335 1310nm SM 60 km ST 4336 1310nm MM 5km MT RJ 4337 1310nm SM 30 km MT RJ 4338 1310nm MM 5km VF 45 4350 1550nm SM 85 km SC 4351 1550nm SM 120 km SC 4353 1310nm MM 5km LC For optical budget specifications see this produc s data sheet Power Adapter Notice 1 When Using in a stand alone configuration this product is intended to be and must be used only with a Listed Direct Technical Support For help with this product contact our Tech Support Phone 949 250 6510 Fax 949 250 6514 Address Omnitron Systems Technology Inc 140 Technology Drive 500 Irvine CA 92618 USA E mail support omnitron systems com URL http Awww omnitron systems com Warning The operating description in this Instruction Manual is for use by qualified personnel only To avoid electrical shock do not perform any servicing of this unit other than that contained in the operating instructions unless you are qualified and certifie
Download Pdf Manuals
Related Search