Chief PSM2536 flat panel wall mount
Contents
1. INSTALLATION INSTRUCTIONS DISPLAY STATIC MOUNT PSM 2534 amp 2536 Figure 1 1 Static Mount 1 10 24 x 5 Phillips Undercut Screw 1 Latching Flag 1 Nylon Washer 4 M8 X 35mm Button Head Cap Screw 1 10 24 Nylock Nut 4 Mounting Buttons Black Nylon 1 M5 Allen Key BEFORE PROCEEDING Unpack the carton verify contents shown in Figure and read installation instructions completely If you are missing any of the listed components please contact Customer Service at 1 800 582 6480 C AUTI ON Displays are Extremely Fragile 1 Attach latching flag to mount using the 10 24 screw Nylon washer and Nylock nut see Figure 2 Tighten until friction will hold the flag in place 2 Attach mounting buttons to the display using the M8 screws provided see Figure 3 amp Figure 4 ATTACH MOUNTING BUTTONS TO BACK OF DISPLAY USING THESE HOLES pia p j IE at i 1 lez NYLOCK f i aed fr HUT acre i pre ae a 1 a NYLON T WASHER _ At A BA vs ae e ae a MOUNTING LATCHING pe BUTTON FLAG __ _ of ae 10 24 UNDERCUT iit f SCREW M amp SCREW rf 1 Figure 2 Figure 3 Figure 4 CHIEF MANUFACTURING INC 8805 000131 REV B TA C H j E F 1 800 582 6480 952 894 6280 FAX 952 894 6918 2005 Chief Manufacturing KA 8401 EAGLE CREEK PARKWAY STE 700 eee ere deas Supporting Ideas SAVAGE MINNESOTA 55378 USA 05 05 A2. LL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING FOUR W A RNIN G TIMES THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED IF IT CANNOT SUPPORT THIS WEIGHT THE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 175 POUNDS 79 38 KG 3 Securely anchor the static mount to wall studs or supporting framework see WARNING 4 Make sure the flag is lowered to the side before attempting to place the display on the mount 5 With the aid of another person lift the display up to the mount align the mounting buttons on the display with the teardrop slots in the mount and set the display into place see Figure 5 6 Position raise the flag to secure the display Install flag using opposing hole if using PAC 130 or PAC 135 Security Accessories see Figure 5 RAISE FLAG TO SECURE DISPLAY ATTACH FLAG USING THIS HOLE IF INSTALLING PAC 130 OR PAC 135 Figure 5
Download Pdf Manuals
Related Search