Chief SLB223
Contents
1. or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document AN Chief Manufacturing a products division of Milestone AV Technologies 8802 000285 Rev03 iC ae l f 8401 Eagle Creek Parkway Savage MN 55378 2011 Milestone AV Technologies P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group Company Our Mounts Your Vision 03 112. HTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface brackets NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 1 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time 2 Turn projector upside down on a flat surface 3 Place nylon spacers over the threaded inserts in the bottom of the projector 4 Place the interface bracket onto the nylon spacers and align the holes in the bracket with the nylon spacers and threaded inserts in the bottom of the projector 5 Position M4 x 20mm mounting screws into shorter spacers and M4 x 25mm mounting screws into taller spacers and into the mounting holes Tighten all fasteners at this time securing the bracket to the projector NOTE Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the All Points Security Kit A b Ree sy cs CONSUMES Chief is a registered trademark of Milestone AV Technologies All rights reserved Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions
3. INSTALLATION INSTRUCTIONS SSB 223 SSM 223 SLB 223 and SLM 223 Interface Brackets SSB 223 SSM 223 SLB 223 and SLM 223 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 2 Spacer Nylon 50 x 277 x 3125 4 10 24 Thumb Nuts 2 Spacer Nylon 50 x 316 x 50 1 All Points Security Kit 2 Screw Phillips flat head M4 x 20mm 1 Key 5 32 2 Screw Phillips flat head M4 x 25mm Towards front Towards front of projector of projector wo SLB 223 SLM 223 Note SSB style interface bracket connections are circled Note SSM style interface bracket connections are circled Only used when installing SLB SSB interface brackets NOTE Specific to SSB style and SSM style interface bracket installation All appropriate screws come pre installed in the circled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style interface bracket installation Installation Instructions WARNING OVER TIG
Download Pdf Manuals
Related Search