Home

Samsung 2494HM

1. VESA 1024 x 768 48 363 60 004 65 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 66 587 59 934 138 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Display ka Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1920 x 1080 e Vertical frequency refresh rate 60 Hz e TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is
2. http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com at BELGIUM CZECH REPUBLIC 800 DENMARK EIRE FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN Appendix Europe 02 201 2418 http www samsung com be SAMSUNG http www samsung com cz 800 726786 Distributor pro Ceskou republiku Samsung Zrt Ceska organiza n slo ka Oasis Florenc Sokolov sk 384717 180 00 Praha 8 8 SAMSUNG 7267864 0818 717 100 30 6227 515 http www samsung com fi 3260 dites SAMSUNG http www samsung com fr 0 15 Min http www samsung com dk http www samsung com ie 0825 08 65 65 0 15 Min 01805 SAMSUNG http www samsung de 7267864 0 14 Min 06 80 SAMSUNG 726 7864 http www samsung com hu 800 SAMSUNG 726 7864 02 261 03 710 http www samsung com lu 0900 SAMSUNG 7267864 http www samsung com nl 0 10 Min 3 SAMSUNG 7267864 http www samsung com no 0 801 1SAMSUNG http www samsung com pl 172678 http www samsung com it 022 607 93 33 808 20 SAMSUNG http www samsung com pt 7267864 0800 SAMSUNG 726 7864 http www samsung c
3. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property dam age Make sure to read the instructions carefully and use the product in the correct manner T Warning Caution Otherwise it may result in death or personal injury Otherwise it may result in personal injury or property damage O Notational Conventions Important to read and under Prohibited stand at all times Disconnect the plug from the outlet NU Do not disassemble Ground to prevent an electric shock eae Do not touch 4 When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L3 Do not use a damaged power cord or plug or a damaged or 2 si loose power outlet Bl o mi Otherwise this may result in electric shock or fire pa L3 Do not touch the power plug with wet hands when removing or Mr plugging the plug into the outlet R Otherwise this may result in electric shock L3 Make sure to connect the power cord to a grounded power out let Otherwise it may result in electric shock or personal injury Safety Instructions L3 Ensure that the power plug is plugged into the power outlet firmly and correctly Otherwise this ma
4. C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interac tion of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 220 800 Note Design and specifications are subject to change without prior notice ma Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to
5. a mouse keyboard Memory Stick or external hard disk drive by connecting them to the DOWN port of the monitor without connecting them to the PC The amp UsB port of the monitor supports High Speed Certified USB 2 0 High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1 5 Mbps Power Consump 2 5 W 2 5 W 2 5 W tion Max each port Max each port Max each port 1 Connect the amp UP port of the monitor and the USB port of the computer with the USB cable rea Note To use amp DOWN port you have to connect the UP Upstream Cable to the PC Make sure to use the USB cable supplied with this monitor to connect the monitor s e UP port and your computer s USB port Connections 2 Connect the DOWN port of the USB monitor and a USB device with the USB cable 3 The use procedures are as the same as those for using an external device connecting to the PC You can connect and use a keyboard and mouse e You can play a file from a media device Examples of media devices MP3 digital camera etc You can run move copy or delete the files on the storage device Examples of storage devices external memory memory card memory reader HDD type MP3 player etc You can use other USB devices that can be connected to a computer Note When connecting a device to the DOWN port of the monitor connect the device using a cable appropriate to the device For the purchase of
6. any heavy items or toys or confectionery such as cookies etc that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L3 Do not turn the product upside down or move it while holding only the stand Otherwise it may fall and result in personal injury and or dam age to the product L3 Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater This may reduce the lifetime of the product and may result in fire Safety Instructions L3 Do not drop any objects onto the product or cause any impact to the product Otherwise this may result in electric shock or fire L3 Do not use a humidifier or kitchen table near the product Otherwise this may result in electric shock or fire L3 When there is a gas leak do not touch the product or the power plug but ventilate immediately e Ifa spark occurs it may cause an explosion or fire L3 If the product has been turned on for a long time the display panel becomes hot Do not touch it e Keep the small accessories in a location out of the reach of children L3 Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause person
7. function List of Parts Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Introduction List of Parts D Sub Cable Power Cord Option USB Cable Cable holding ring Cleaning Cloth Sold separately DVI Cable Stereo Cable HDMI Cable Headphones Note USB cable is only provided when the stand type is HAS USB or SIMPLE USB e Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE USB e Cleaning Cloth is only provided for highly polished black products as a product feature Your Monitor Initial Settings The optimal resolution for this monitor is as follows titt X ttt Hz Follow the above settings to set the resolution a Language Select the language using the up or down key The displayed content will disappear after 40 seconds Turn the power button off and on It will be displayed again It can be displayed up to three 3 times Make sure to adjust the resolution of your PC before reaching the maximum count Note The resolution displayed on the screen is the optimal resolution for this product Adjust your PC resolution so that it is the same as the optimal resolution for this product Front Introduction MENU OT G1 A D GD source O o O e Note Touch them lightly with your fingers to use them e MENU button MENUMD Opens the on screen menu and exits from the menu Also use to exit the OSD menu or
8. ima Chose thia option ko select the devane draa homa bet Windows does not guarentee hat l a creer posa hoo yell ba ha bagi makoh For your hides Cie e C Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Hardward Update Wizard Selec the device divei you want bo inalali For thia harders Iser Ihe nud chus matallabon dk and then make sure thal the conect dive t selected below bida Samsung es Copy manulachuner s fes Hom a hi derer s rend dipal signat T pet the rater ard modal of wg kanais device d ri Kon dh Had P ex hase dk that eant the deve you mari bo thal chek Hasse Desk Hawa Disk Lel me whe dean grins ii rocrtant n Cas Ce Cue If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou are installing Ica this hardware Samsung uiii has nol passed Windows Logo be wath finda SP T 1 Continuing your installation of this software map impar or destabilize the corect operation of your system ether immediately of m the future Microsoft zbronagly recommends thal pou stop this installation now and contact th hardware vendo for softwanr that has passed Windows Logo testing t wenly d E0iniEuabibsblyy I tani Ea Co Note This monitor driver is under certifying MS logo and t
9. output terminal Selet HDMI using the SOURCE button Note If you just connect using the DVI to HDMI cable without connecting to the sound source you cannot hear sound Connections Connecting USB Option 27 Note You can use a USB device such as a mouse keyboard Memory Stick or external hard disk drive by connecting them to the S DOWN port of the monitor without connecting them to the PC The amp UsB port of the monitor supports High Speed Certified USB 2 0 High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1 5 Mbps Power Consump 2 5 W 2 5 W 2 5 W tion Max each port Max each port Max each port 1 Connect the amp UP port of the monitor and the USB port of the computer with the USB cable iro Note To use amp DOWN port you have to connect the UP Upstream Cable to the PC Make sure to use the USB cable supplied with this monitor to connect the monitor s e UP port and your computer s USB port 2 Connect the DOWN port of the USB monitor and a USB device with the USB cable 3 The use procedures are as the same as those for using an external device connecting to the PC e You can connect and use a keyboard and mouse Connections e You can play a file from a media device Examples of media devices MP3 digital camera etc You can run move copy or delete the files on the storage device Examples of storage devices external memory memory card memor
10. remove Multiscreen Select Setting Control Panel on the Start menu and then double click Add Delete a pro gram Select Multiscreen from the list and then click the Add Delete button Adjusting the Monitor Direct Functions AUTO MENU T When the AUTO button is pressed the auto adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming Analog signal The values of Fine Coarse and Position are adjusted automatically Available in Analog mode only If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy l you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock When pressing the AUTO button after locking the OSD Adjusting the Monitor a SOURCE Yit PE SOURCE This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the MENU button for more than five 5 seconds to activate the OSD ad justment lock function Unlock Hold down the MENU button for more than five 5 seconds to deactivate the OSD adjustment lock function Adjusting the Monitor Note Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust Customized Key using the Direct butto
11. return to the previous menu Customized Key You can customize key assignment for the Custom button according to your preferences Note You can configure the Customized key for a required function via Setup gt Customized Key Volume button When OSD is not on the screen push the button to adjust volume 2 Click here to see an animation clip Adjust buttons k Adjust items in the menu Enter button i SOURCE button Activates a highlighted menu item Push the SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal Rear Introduction Note If you select the digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable gt gt Click here to see an animation clip AUTO button Use this button for auto adjustment gt gt Click here to see an animation clip Power button 5 J Use this button for turning the product on and off Power Indicator This light is lit when operating normally and blinks once when your ad justments are saved Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Speaker You can hear
12. to change the contrast according to personal preference MENU 1 amp MENU MagicBright PEN SQURCE Push the button to circle through available preconfigured modes MagicBright is a new feature providing optimum viewing environment depending on the con tents of the image you are watching Currently seven different modes are available Cus tom Text Internet Game Sport Movie and Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing MagicBright control button Adjusting the Monitor e Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu e Text For documents or works involving heavy text e Internet For working with a mixture of images such as texts and graphics e Game For watching motion pictures such as a game e Sport For watching motion pictures such as a sport e Movie For watching motion pictures such as a DVD or Video CD Dynamic Contrast Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast MENU gt a MENU Picture Mode Push the t button to circle through available preconfigured modes The Monitor has four a
13. white this means the monitor is in working condition In this case check the computer for trouble Check List Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer No images on the screen cannot turn on the monitor Q Is the power cord connected properly A Check the power cord connection and supply Q Can you see Check Signal Cable on the screen A Connected using the D sub cable Check the signal cable connection Connected using the DVI cable If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog Press l SOURCE button to have the monitor double check the input signal source Q lfthe power is on reboot the computer to see the initial screen the login screen which can be seen A Ifthe initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes If the initial screen the login screen does not appear contact the Service Center or your dealer Q Can you
14. 0 30 UA102 21 10 UA102 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black 4 White Grey Ex SYSTEM 245 Information e Recommended settings Bright colors with little difference in luminance e Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Every 30 minutes change the characters with movement Ex PAFAWUVAC Eo PLI UJ KA1710 12 00 KA1710 12 00 m FA 777 14 15 UA0110 13 30 LIAN11N 12 20 AA0002 14 00 FA7777 14 15 8 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal con ditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Inform
15. PC Make sure to use the USB cable supplied with this product to connect the product s e UP port and your computer s USB port Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustra tion depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be different depending on its model Using the Anti Theft Kensington Lock 1 Insert the locking device into the Ken sington slot on the Monitor 3 and turn itin the locking direction AJ 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object Remove the fixing pin on the stand to lift the product up and down Introduction Note See Connecting Cables for further information regarding cable connections SyncMaster 2494HS Connections Connecting Cables Rear of Monitor Rear of Computer Connect the power cord for your monitor to the POWER port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use a connection appropriate for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of yo
16. RGY STAR Partner SAMSUNG has deter mined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz VESA 640 x 480 31 469 59 940 25 175 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 1024 x 768 48 363 60 004 65 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 66 587 59 934 138 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertica
17. Themes icon E Foie Eraz tiswsassrsi me x drea rr Brom ram Caph imr j Emal la Piy Berman Dna namana k md Chat lcs pure a EE Feb irbes um HET pas E Pye Felnsmfr x Moko pond ig Pepy focus WA ee ee care 3 Prinses sri Fawaz C Mindoro Podio Misayo met MESH EEnpileear Ke rete and cant MU ose p Sanh LOW amiens loses Pius ber KV iun E Petes aes od tienes FE rage cnm E a Loa on em Turri CET i 3 Click Display icon and choose the Settings tab then click Advanced Tiere Cas Jaren Terem d pense Gale b ikr t n cond bee ey E our aa F Go Nara oies Dipig or pick a Control Panel icon la Kln e ic MAA re Greka pisiy Higher 32 Exit TODA be 76O perla concer 4 Monitor tab and select Driver tab DE GeForce J Device Selection 209 Cote Conection General Adapter Moraes Taresublesz ect Color Hanagamani Pellicer Eye mi Pag and Pisy Monitor Cmo Citer x Phag ano Play Moto Dewa yee Horic Horace Ghancard mentor pes Location n 3D Fiap I Foro ceils Donen ielsezh nata EC Hauts Ka D vijs iii Thus clmseim ie taraka purge If pou ane hasang problems wah the diaca click Ticublsshoot bo eh tinum Acaba hotan 7 Hide micas that this morte cane cages Cheaiiru tls check boo aikan quia Lo qelect dhiplay riches Ihal thia W Cannet che plage oneik Thig may kad bo an Leu g se ch p 3 cu damaged haniwana De
18. ake sure that Au I the front end of the bottom of the product does not project out Q WHT Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Safety Instructions L3 DO NOT PLACE CANDLES MOSQUITO REPELLANT CIG ARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT Otherwise this may result in fire L3 Keep heating appliances as far away from the power cord or the product as possible e Otherwise this may result in electric shock or fire L3 Do not install it in a badly ventilated location such as a bookcase or closet Otherwise this may result in fire due to an increase in the in ternal temperature L3 Put down the monitor carefully e Failing to do so may damage the monitor L3 Do not place the front of the product on the floor Otherwise this may result in damage to the screen display L3 Ensure that an authorized installation company installs the wall mount Otherwise it may fall and cause personal injury Make sure to install the specified wall mount L3 Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall Otherwise it may result in fire due to an increase in the internal temperature L3 Ensure that the packaging vinyl is kept away from children e Otherwise it may result in serious harm suffocation if children play with it L3 If the height of your moni
19. al injury L3 Do not install the product in a location low enough for children to reach Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface L3 Do not put any heavy objects on the product his may result in personal injury and or damage to the prod uct When using the product use it in the correct posi tion Keep your back straight while looking at the prod uct he distance between your eyes and the screen should be between 45 to 50 cm Look at the screen from a slightly higher location than the height of the screen When using the product use it in the correct posi tion Safety Instructions Adjust the angle so that light is not reflected on the screen Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand Keep your elbow at 90 degrees Keep your knees at greater than 90 degrees and keep your heels firmly on the floor Keep your arms lower than your heart SyncMaster 2494HS Introduction Package Contents Note Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Type 1 Monitor and HAS stand Type 2 Monitor and HAS USB stand Type 3 Monitor and Simple stand Type 4 Introduction Monit
20. are 10 You have finished setting up your monitor Execute X Window after setting other re quested hardware Natural Color Natural Color Software Program Lm ELECTRONICS Natural Color Pro color management system Monitor Cal amp Profiling Preference Copyrightie 2003 Samsung Electrenics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Elec tronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the
21. ation Common Electrode ITO Black Matrix Color F ilter Data Gate TFT Pixel Electrode Storage Capacitor Bus Line ITO Cs o Our LCD Monitor satisfies ISO13406 2 Pixel fault Class ll Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA TRINIDAD amp TO BAGO VENEZUELA AUSTRIA North America 1 800 SAMSUNG 726 7864 http www samsung com us 1 800 SAMSUNG 726 7864 http www samsung com ca 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 0810 SAMSUNG 7267864 0 07 min http www samsung com mx http www samsung com ar http www samsung com br http www samsung com cl http www samsung com co http www samsung com lat in http www samsung com lat in http www samsung com lat In http www samsung com lat In http www samsung com lat in http www samsung com lat in http www samsung com lat in
22. ble connecting to the monitor the power cord of cable can be destroyed Connections Tilt angle HAS Stand HAS USB Stand Using You can adjust the tilt angle within a range of 5 forward to 25 backward for the most comfortable viewing angle Simple stand Simple USB stand Using You can adjust the tilt angle within a range of 0 forward to 23 backward for the most comfortable viewing angle Attaching a Base This monitor accepts a 200 mm x 100 mm VESA compliant mounting interface pad Connections Simple Stand HAS Stand Monitor Mounting interface pad Sold separately 1 Turn off your monitor and unplug its power cord 2 Laythe LCD monitor face down on a flat surface with a cushion beneath it to protect the Screen 3 Remove four screws and then remove the stand from the LCD monitor 4 Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm type base wall mount hanger or other base e Donot use screws longer than the standard dimension as they may dam age the inside of the Monitor For wall mounts that do not comply with VESA standard screw specifica tions the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the produc
23. d normally Unavailable in Analog mode Note Defaults DVI mode Off HDMI mode On MENU Y H a l sag v v MENU Adjusting the Monitor HDMI Black Level EM SOURCE AUTO o When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level Operates only for HDMI mode MENU Y H a l sa 95 MENU i Information a SOURCE Shows a video source display mode on the OSD screen Adjusting the Monitor MENU a Y MENU Troubleshooting Self Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous proc
24. displayed on your monitor Adjusting the Monitor e Auto The screen is displayed in accordance with the screen aspect ratio of the input signals e Wide A full screen is displayed regardless of the screen aspect ratio of the input signals Note This does not operate when the resolution of your PC is set to Wide MENU a T gt Y l sa MENU HDMI DVI Mode E SOURCE You can change the size of the screen displayed on your monitor 4 3 Sets the picture to 4 3 normal mode Wide Enlarges the aspect ratio of the picture to fit the entire screen e Just Scan Use the function to see the full image without any cutoff when HDMI DVI 720p 10801 1080p signals are input Note e tcanonly be selected if an external input is connected to the HDMI DVI terminal and the AV Mode is set to On e Signals not available in the standard mode table are not supported e Ifthe wide screen which is the optimal resolution for the monitor is set on your PC this function is not performed MENU a gt H a T gt H Sa 9s MENU Adjusting the Monitor AV Mode EM SOURCE This function allows the screen to be displayed at the optimal quality in accordance with the size of the screen when a 480P 576P 720P 1080i or 1080P video signal is input in HDMI DVI mode Set to Off when connected to a PC Set to On when connected to an AV device If not set to On the screen may not be displaye
25. drive where the CD is inserted is not D enter the applicable drive How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a pro gram Select Natural Color from the list and then click the Add Delete button AutoRotation Installation 1 Insert the installation CD into the CD ROM drive 2 Click the AutoRotation installation file Using the Software Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the AutoRotation executable file on the CD Select installation Language Click Next When the Installation Shield Wizard window appears click Next Select agree to the terms of the license agreement to accept the terms of use Choose a folder to install the AutoRotation program Click Install The Installation Status window appears Click Finish When the installation is complete the MagicRotation MagicTune executable icon ap pears on your desktop Double click the icon to start the program MagicTune execution icon may not appear depending on specification of com puter system or monitor If that happens press F5 Key Installation Problems MagicTune M The installation of MagicTune can be affected by such factors as the video card mother board and the network environment oystem Requirements OS Windows 2000 Windows XP Ho
26. duction Rear Note The configuration at the back of the monitor may vary from product to product POWER SW POWER POWER 5 nu POWER HDMI IN DVI IN HDCP RGB IN HOMI IN DVI IN HDCP RB IN amp AUDIO IN AUDIO OUT CO POWER SW Switch the product on and off JPOWER Connect the power cord for your monitor to the POWER port on the back of the product CUDMI IN Connect the HDMI Nterminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable DVI IN HDCP Connect the DVI cable to the DVI IN HDCP port on the back of your product RGB IN Connect the RGB N terminal at the back of your product to your computer Introduction CX AUDIO IN Connect the audio cable for your product to the audio port on the back of your computer AUDIO OUT Headphone output terminal O gt USB connection ter minal Option Que USB upstream port Connect the amp UP port of the product and the USB port of the computer with the USB cable DOWN USB downstream port Connect the amp DOWN port of the USB product and a USB device with the USB ca ble Note To use amp DOWN Downstream Port you have to connect the UP Upstream Ca ble to the PC Make sure to use the USB cable supplied with this product to connect the product s e UP port and your computer s USB port o Kensington Lock Kensington Lock Th
27. e Windows needs is displayed as shown in the figure below click Continue Meniier Type A Gran Pre Monitor Morvtor fe tinge Sen n r gh rate 8 He z d pje oi Pal PA PC LOL aiy h ng Ei check b n i you 5c ad dispury sedem az Ha mart Cannot dapi crei y This mary leid R an urate Japar ancor Gares orge p Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab a eee SET ee Mg See rrr ire Manufacture EwrsSard essor Kapa Locator en PACA Gere 6600 LE iaaa Comes Deno aan Fi aiana a iare prog Ta vem Gat nin oui Sa Sia H ng To updsis Ea diam ppan Hor a naga fra drvca tah er dara ng aver rd heck b ak piy rale He Dianna Gus mecs dioa Tour Fa deser Ara Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer E X 1 a SS ia B I Hic dor viu van 20 sedqich dog dereer pee Bros for Creer uofrwang pn yr COSTI ay Paw deen carin anm s Plan moa Far panii dukatai des updabrd deer s i mi e Ko orale aud pee Boye Aa medi un eed Pos Ger LA fon eee igni dim der deletam Lgs np ed al Jedi ee aa o Lan erap peck bom it of dee Grier on ny ccengpurter Tika fied ard chen moi ard fern url aa
28. e Kensington Lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustra tion depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be different depending on its model Introduction Using the Anti Theft Kensington Lock 1 Insert the locking device into the Ken sington slot on the Monitor 3 and turn itin the locking direction AJ 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object Stand Stopper Only ap plied to HAS or HAS USB type stand Je Remove the fixing pin on the stand to lift the product up and down Fm Note See Connecting Cables for further information regarding cable connections package ents SyncMaster 2494HM Note Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Type 1 a Monitor and HAS stand Type 2 Introduction Monitor and HAS USB stand Type 3 Monitor and Simple stand Type 4 Monitor and Simple USB stand Note MagicRotation program can not be provided as Simple Stand does not support Pivot
29. e upgrades MultiScreen Installation im MultiScreen Insert the installation CD into the CD ROM drive Click the MultiScreen installation file Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the MultiScreen executable file on the CD When the Installation Shield Wizard window appears click Next Select agree to the terms of the license agreement to accept the terms of use Choose a folder to install the MultiScreen program Click Install The Installation Status window appears Click Finish Using the Software 9 When the installation is complete the Multiscreen executable icon appears on your desktop Double click the icon to start the program Multiscreen execution icon may not appear depending on specification of computer system or monitor If that happens press F5 Key Installation Problems The installation of MultiScreen can be affected by such factors as the video card motherboard and the network environment System Requirements OS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista It is recommended using MultiScreen in Windows 2000 or later Hardware e 32 MB Memory above e 60 MB Hard disk space above Uninstall The Multiscreen program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps
30. edure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Mot Optimum Mode Recommended Mode y ee Hz Environment The location and the position of the monitor may influence the quality and other features of the monitor If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Troubleshooting Useful Tips A monitor recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the monitor to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1920 x 1080 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on If there is a message coming up on the screen or if the screen goes
31. gle Simple stand Simple USB stand Using 95 You can adjust the tilt angle within a range of 0 forward to 23 backward for the most comfortable viewing angle Attaching a Base This monitor accepts a 200 mm x 100 mm VESA compliant mounting interface pad Connections Simple Stand HAS Stand Monitor Mounting interface pad Sold separately 1 Turn off your monitor and unplug its power cord 2 Laythe LCD monitor face down on a flat surface with a cushion beneath it to protect the Screen 3 Remove four screws and then remove the stand from the LCD monitor 4 Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm type base wall mount hanger or other base e Donot use screws longer than the standard dimension as they may dam age the inside of the Monitor For wall mounts that do not comply with VESA standard screw specifica tions the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Connections Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the prod
32. hardware Samsung sasa has noi passed Windows Logo testing l wenly is compabbdiy with Windows XP Tell mg why thes testing is Important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately of in the future Microzolt strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing L STOP Installation Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click CD Start and Control Panel Then double click on Appearance and Personal ization 3 PAA ee ee eee ry yer aa am ee GP ee rut ae ce oe ee pee oe gm a LI Bd RES SE a Sy ay 2 p wm rr umm rm l n m ee oe Raw i Pe GV dul MARE LR a E M remm ner Tr sewer Pe 4 Dang or bre bo makeh piu Present _L huup t Menor bn AA Geforce D003 LE oi n Corpesamen F core 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is Using the Software If the messag
33. hed if there is any foreign material on the cloth make sure to shake it thoroughly before using it L3 When cleaning the product do not spray water directly onto the main body of the product Ensure that water does not enter the product and that it is not wet Otherwise this may result in electric shock fire or a malfunc tion L3 The product is a high voltage product Ensure that users do not disassemble repair or modify the product themselves Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L3 If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and con tact a Service Center Otherwise this may result in electric shock or fire L3 Do not place this product in a location exposed to moisture dust smoke water or in a car Otherwise this may result in electric shock or fire Safety Instructions f L3 When you drop the product or the case is broken turn the power ESS off and disconnect the power cord Contact a Service Center BA Otherwise this may result in electric shock or fire dd L If thunder or lightening is occurring do not touch the power cord ur or antenna cable ch y e r 8 Otherwise this may result in electric shock or fire L3 Do not try to move the monitor by pulling only the wire or the 3 signal cable o a e Otherwise it
34. his installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tha vazard b hraherd ribalirsg the sofern ka E Samsung eee Samsung wee Dingess Provnes Drives Dake Died Wea cn Ciga Sigma Di Dalsi Bol Back Driver LUrervetal CE Fah lo diria the ec dl Sang 1142001 1 0 0 0 Hot ipia signed To vies datali abau Hha chives hoa To update tus creer fon iha device ii tho dose bada after the cree roll back bo iha pee bee crees To uninzi ll Kh m creer DA cbs Using the Software 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Choose Monitor Casel If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button i
35. ies dialogue box Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Selecta mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file 1 Press Enter at the first and the second screen after executing the X86Config file 2 The third screen is for setting your mouse 3 Set a mouse for your computer 4 The next screen is for selecting a keyboard 5 Set a Keyboard for your computer 6 The next screen is for setting your monitor 7 First of all set a horizontal frequency for your monitor You can enter the frequency directly 8 Seta vertical frequency for your monitor You can enter the frequency directly 9 Enterthe model name of your monitor This information will not affect the actual execution of X Window Using the Softw
36. l Frequency or Refresh Rate Unit Hz General Specifications General Model Name SyncMaster 2494HM LCD Panel Size 24 diagonal 61 cm Display area 531 36 mm H x 298 89 mm V Pixel Pitch 0 2768 mm H x 0 2768 mm V Synchronization Horizontal 30 81 kHz Vertical 56 60 Hz Display Color 16 7 M Resolution Optimum resolution 1920x1080 60 Hz RB Maximum resolution 1920x1080 60 Hz RB Input Signal Terminated RGB Analog DVI Digital Visual Inter face HDMI 0 7 Vp p 5 separate H V sync Composite TTL level V high 2 2 0 V V low s 0 8 V Maximum Pixel Clock 164 MHz Power Supply AC 100 240 V 10 96 50 60 Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight Simple stand Simple 572 8 x 363 7 x 67 5 mm 22 6 x 14 3 x 2 7 inch Without USB stand Stand 5 2 kg 11 5 Ibs 572 8 x 420 4 x 227 4 mm 22 6 x 16 6 x 9 0 inch With Stand 6 1 kg 13 4 Ibs HAS stand HAS USB 572 8 x 363 7 x 67 5 mm 22 6 x 14 3 x 2 7 inch Without stand Stand 5 2 kg 11 5 Ibs Specifications Dimensions W x H x D Weight 572 8 x 420 4 x 249 9 mm 22 6 x 16 6 x 9 8 inch With Stand 8 4 kg 18 5 Ibs VESA Mounting Interface 200 x 100 mm Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 Yo 80 Yo non condensing Storage Temperature 4 F 113 F 20
37. lier and check the terms and conditions of the purchase con tract This product should not be mixed with other commercial wastes for disposal Information in this document is subject to change without notice 2008 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Elec tronics Co Ltd is strictly forbidden Appendix Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this ma terial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners
38. mage retention doesn t occur How ever if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product de fect Please follow the suggestions below to protect your LCD from image retention o Power Off Screen Saver or Power Save Mode Ex Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use Use a Screen saver if possible e Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme g Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below D Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute 5 Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 FLGHT FLGHT TIME 02348 a My 2
39. may fall and result in electric shock damage to the product or fire due to damage to the cable L3 Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L3 Make sure that the ventilating opening is not blocked by a table or curtain Otherwise it may result in fire due to an increase in the internal temperature L3 Do not place any containers containing water vases flower pots medicines as well as any metal on the product e If water or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L3 Do not use or keep combustible spray or flammable material near the product C2 MW PI X Otherwise this may result in an explosion or fire pl f L3 Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the 87 c Wy product through the ventilating openings input and output termi OL nals etc f water or foreign material enters the product disconnect the power cord and contact a Service Center Otherwise this may result in electric shock or fire L3 When using a fixed screen for a long time an afterimage or stain may occur Q e If you are not
40. me Edition Windows XP Professional Windows Vista It is recommended using MagicTune in Windows 2000 or later Hardware 32 MB Memory above 60 MB Hard disk space above For more information visit the MagicTune website Installation Problems MagicRotation The installation of MagicRotation can be affected by such factors as the video card mother board and the network environment Limitation Using the Software 1 The Display Driver should be properly loaded for the MagicRotation to work properly The installed Display Driver should be the latest driver supplied by the vendor 2 If some applications like Windows Media Player Real Player etc are not displaying movie files properly in 90 180 and 270 orientations then do the following Close the application e Select the Orientation 90 180 270 you want to view the application e Relaunch the application In most cases this should fix the problem 3 User Applications using OpenGL and DirectDraw 3D drawing will not function as per the orientation mode selected 90 180 270 e g 3D games 4 DOS based applications in Full Screen Mode will not function as per the orientation mode selected 90 180 270 5 Dual is not supported in Windows 98 ME NT 4 0 6 MagicRotation does not provide support for 24 bits per pixel Bit depth Color Quality 7 f you are changing your Graphic Card it is recommended that you uninstall the Magi cR
41. n Customized key 3 1 SOURCE AUTO You can customize key assignment for the Custom button according to your preferences To view the operating screen displayed when pressing the E3 button after configuring the customized key for a function click the name of each function MagicBright MagicColor Color Effect Image Size Note You can configure the Customized key for a required function via Setup gt Customized Key Adjusting the Monitor Volume MENU TI ETF tm 27 SOURCE When OSD is not on the screen push the button to adjust volume SOURCE MENU 7 C fifo PEN SOURCE Selects the video signal while the OSD is off OSD Function F7 Picture Brightness Contrast MagicBright Picture Mode Adjusting the Monitor Color MagicColor Color Tone Color Con Color Effect Gamma trol t Image Coarse Fine Sharpness H Position V Position RC OSD Language H Position V Position Transparen Display cy Time ME Setup Reset Customized Off Timer Auto Source Image Size Key AV Mode HDMI Black Level fo Information E Picture Brightness Not available in MagicBright mode of Dynamic Contrast SOURCE AUTO You can use the on screen menus to change the brightness according to personal prefer ence MENU 1 4 5 15 MENU Contrast Not available in MagicBright mode of Dynamic Contrast Adjusting the Monitor SOURCE You can use the on screen menus
42. n Screen Display Q A Have you locked the On Screen Display OSD Menu to prevent changes Unlock the OSD by pressing the MENU LL button for at least 5 seconds The screen shows strange colors or just black and white Q Is the screen displaying only one color as if looking at the screen through a cellophane paper Check the signal cable connection Make sure the video card is fully inserted in its slot Have the screen colors become strange after running a program or due to a crash between applications Reboot the computer Has the video card been set properly Set the video card by referring to the video card manual The screen suddenly has become unbalanced Q A Have you changed the video card or the driver Adjust screen image position and size using the OSD Troubleshooting Have you adjusted the resolution or frequency to the monitor Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes Q The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD The screen is out of focus or OSD cannot be adjusted Q Have you adjusted the resolution or frequency on the monitor A Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes LED is blinking but no images on the screen Q Is the frequency properly adjusted when checking the Display Timing on the menu A Adjust
43. nal of your computer s sound card using a stereo cable sold sepa rately Connections Note If the monitor and the computer are connected you can turn them on and use them Connecting HDMI Note You can connect digital output devices to your monitor You can enjoy better screen and sound quality Connecting Using a HDMI Cable HOMI IM 1 Input devices such as digital DVD are connected to the HDM Nterminal of the monitor using the HDMI cable When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital output terminal Select HDMI using the SOURCE button Connecting Using a DVI to HDMI Cable HOMI IH PL D 4 HANG IP 1 Connect the DVI output terminal of a digital output device to the HDM Nterminal of the monitor using a DVI to HDMI cable 2 Connect the red and white jacks of an stereo cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the AUD O N terminal of the monitor 3 When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital output terminal Connections 4 Selet HDM using the SOURCE button 7 Note If you just connect using the DVI to HDMI cable without connecting to the sound source you cannot hear sound Connecting USB Option ry Note You can use a USB device such as
44. nd you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 220 800 Note Design and specifications are subject to change without prior notice 7 l Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature Specifications State Normal Operation Powersaving Power off Power Switch mode off Power Indicator On blinking Off Power Con 44 watts less than 1 5 watts less than 1 watt off mode sumption This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality As an ENE
45. nge the vertical position where the OSD menu appears on your monitor MENU 4 54 l 54 MENU Adjusting the Monitor Transparency SOURCE AUTO Change the transparency of the background of the OSD e Off e On MENU a 5 MENU Display Time PEN SOURCE AUTO The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off Adjusting the Monitor e 5 sec e 10sec e 20sec e 200 sec MENU Y l a Y l t MENU EH oetup Reset a SOURCE AUTO Reverts the product settings to factory defaults No Yes MENU a 25S MENU Adjusting the Monitor Customized Key 3 SOURCE You can specify a function which will be activated when the Customized Key L1 is pressed MENU a gt H l gt MENU Off Timer EM SOURCE The monitors will turn off automatically at the specified time e Off e On MENU a T H gt a mi Y l 54 v MENU Adjusting the Monitor Auto Source een Pa piga VE Fer ae F aa j ER s JSOURCE AUTO Select Auto Source for the monitor to automatically select the signal source e Auto e Manual MENU gt 4 2s oa SMENU Image Size PC Mode af SOURCE AUTO You can change the size of the screen
46. normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Operation Powersaving Power off Power button mode EPA ENERGY 2000 Power Indicator On blinking Off Specifications State Normal Operation Powersaving Power off Power button mode EPA ENERGY 2000 Power Con 44 watts less than 1 5 watts less than 1 watt sumption Off mode This monitor is EPA ENERGY STAR compliant and di bs ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality As an ENERGY STAR Partner SAMSUNG has deter mined that this product meets the ENERGY STARS guidelines for energy efficiency ENERGY STAR Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz VESA 640 x 480 31 469 59 940 25 175 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000
47. not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 6 220 800 When cleaning the monitor and the panel outside please apply the recom mended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it ba If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is ap peared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function e When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention ta Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty o What is Image retention Information During normal operation of a LCD panel pixel i
48. nt oper ani Che abren r aral al cm uaga er ar ey gn wem re Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software i mga Thai kha cone dies is gelecied baliw Specs the deve drier you ward 1m maba Rer th y handwanr wm CT Cancel Tani Pa aes IL B pour Paanan dette o Pan th Pee Pa bara il Pal a Pa eae LLLI LEN I Ll Aa Gaman Fe Marin 9 Selectthe model that matches your monitor from the list of monitor models on the screen and click Next Seki the dice driver you viai Vo iba es thia handbag A Ta pa Sirahe ird eke pl pour Pain desc ans Pur ch u Puma reu Bar a iak faa PI a Mr Samsung ems Wr Sama eres ont haa subo Ad pme your deer sofware A MP t ng can T xem d b n pln Pai eve H a DT TH ee Pos Tr i dee liae dapa adi ha vi n ap ee audi DES Du fh pA muss Ir I Mone Type Menor Jaib Screen refresh raba 50 Hertz V pide modes that the monitor cannot display Clearing thi check box alpa yeu in select dapiry modes that this mont cannot display correctly This may leid te an unable T Thus i5 my mH maoritor Gat Extemd the desktop onto that montor Microsoft Windows XP Operating System Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and
49. ntal control menu Available in Analog mode only MENU a amp MENU a SCURGE Adjusting the Monitor Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed Available in Analog mode only MENU a gt 5 MENU Sharpness a SOURCE Changes the clearance of image MENU a gt l MENU Adjusting the Monitor H Position E SOURCE Changes the horizontal position of the monitor s entire display Available in Analog mode only MENU a gt l MENU V Position ml SOURCE Changes the vertical position of the monitor s entire display Available in Analog mode only MENU a H a F l MENU Adjusting the Monitor EI osp Language PEN SOURCE AUTO You can choose one of nine languages English Deutsch Espa ol Fran ais Italiano Svenska PyccKkHA Portugu s T rk e Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer MENU gt 4 gt amp MENU Adjusting the Monitor H Position FE SOURCE You can change the horizontal position where the OSD menu appears on your monitor MENU a 5 MENU V Position a3 SOURCE AUTO You can cha
50. o 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight Simple stand Simple 572 8 x 363 4 x 67 5 mm 22 6 x 14 3 x 2 7 inch Without USB stand Stand 5 35 kg 11 8 lbs 572 8 x 420 4 x 227 4 mm 22 6 x 16 6 x 9 0 inch With Stand 6 2 kg 13 7 Ibs Specifications Dimensions W x H x D Weight HAS stand HAS USB 572 8 x 363 4 x 67 5 mm 22 6 x 14 3 x 2 7 inch Without stand Stand 5 35 kg 11 8 Ibs 572 8 x 420 4 x 249 9 mm 22 6 x 16 6 x 9 8 inch With Stand 8 55 kg 18 8 Ibs VESA Mounting Interface 200 x 100 mm Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interac tion of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality a
51. om sk 902 1 SAMSUNG 902 172 http www samsung com es 678 075 SAMSUNG 726 78 64 http www samsung com se 0848 SAMSUNG 7267864 CHF 0 08 min 0845 SAMSUNG 7267864 http www samsung com ch http www samsung com uk CIS 800 7267 http www samsung ee 8000 7267 http www samsung com lv 8 800 77777 http www samsung lt 8 10 800 500 55 500 http www samsung com kz ru 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 http www samsung ru http www samsung ua http www samsung com kz ru Terms AUSTRALIA CHINA INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA TURKEY U A E Dot Pitch Vertical Frequency 1300 362 603 800 810 5858 Appendix Asia Pacific http www samsung com au http www samsung com cn 400 810 5858 010 6475 1880 HONG KONG 3698 4698 3030 8282 http www samsung com hk http www samsung com in 1800 110011 1 800 3000 8282 0800 112 8888 0120 327 527 1800 88 9999 http www samsung com id http www samsung com jp http www samsung com my 0800 SAMSUNG 0800 726 http www samsung com nz 786 1800 10 SAMSUNG 726 7864 http www samsung com ph 1800 SAMSUNG 726 7864 http www samsung com sg 1800 29 3232 http www samsung com th 02 689 3232 0800 329 999 1 800 588 889 http www samsung com tw http
52. onnected to the computer Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer If you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver Check if the scanning ratio of the video screen is set to between 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution Q amp A Troubleshooting If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter in the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Note If problems repeatedly occur contact an authorized service center Q How can change the frequency The frequency can be changed by reconfiguring the video card A Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details Q How can adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Set tings A Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details Q How can I set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Dis
53. or the user by allowing the computer and the monitor to ex change information automatically This monitor follows the international standard VESA DDC for the Plug amp Play func tion The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1920 x 1080 this means the screen is composed of 1920 horizontal dots horizontal res olution and 1080 vertical lines vertical resolution Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other Euro pean countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please sep arate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of ma terial resources Household users should contact either the retailer where they purchased this product or their local gov ernment office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supp
54. or and Simple USB stand Note MagicRotation program can not be provided as Simple Stand does not support Pivot function List of Parts Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Power Cord USB Cable Cable holding ring Sold separately IPE DVI Cable Stereo Cable HDMI Cable Headphones Introduction Note USB cable is only provided when the stand type is HAS USB or SIMPLE USB e Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE USB Your Monitor Initial Settings The optimal resolution for this monitor is as follows titt X L cede Hz Follow the above settings to set the resolution Language Select the language using the up or down key The displayed content will disappear after 40 seconds Turn the power button off and on It will be displayed again It can be displayed up to three 3 times Make sure to adjust the resolution of your PC before reaching the maximum count _ Note The resolution displayed on the screen is the optimal resolution for this product Adjust your PC resolution so that it is the same as the optimal resolution for this product Front SAMSUNG Yi Gy source Note Touch them lightly with your fingers to use them e Introduction MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Customized Key Y
55. otation Software before doing so System Requirements OS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista Hardware e 128 MB Memory above recommended e 25 MB Hard disk space above oervice Packs tis recommended that your System has the latest Service Pack installed For Windows NT 4 0 it is recommended to install Internet Explorer 5 0 and above with Active Desktop component For more information visit the MagicRotation website Windows is registered trademark of Microsoft Corporation Inc Uninstall Using the Software The AutoRotation program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove AutoRotation 1 6 f Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu Click the Add or Remove Programs icon in Control Panel In the Add or Remove Programs screen scroll down to find AutoRotation Click on it to highlight it Click the Change Remove button to remove the program Click Yes to begin the uninstall process Wait until the Uninstall Complete dialog box appears After uninstall restart the system to complete the uninstallation Note Visit the AutoRotation website for technical support for AutoRotation FAQs questions and answers and softwar
56. ou can customize key assignment for the Custom button according to your preferences Note You can configure the Customized key for a required function via Setup gt Customized Key Volume button When OSD is not on the screen push the button to adjust volume 2 Click here to see an animation clip Adjust buttons i J Adjust items in the menu Enter button i SOURCE button Activates a highlighted menu item Push the SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal Note If you select the digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable gt gt Click here to see an animation clip AUTO button Use this button for auto adjustment gt gt Click here to see an animation clip Power button Use this button for turning the product on and off Power Indicator This light is lit when operating normally and blinks once when your ad justments are saved E Note oee PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Speaker You can hear sound by connecting the soundcard of your PC to the mon itor Intro
57. play Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual A Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual Q How can I clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer Specifications General General Model Name SyncMaster 2494HS LCD Panel Size 23 6 diagonal 59 cm Display area 521 28 mm H x 293 22 mm V Pixel Pitch 0 2715 mm H x 0 2715 mm V oynchronization Horizontal 30 81 kHz Vertical 56 60 Hz Display Color 16 7 M Resolution Optimum resolution 1920x1080 60 Hz RB Maximum resolution 1920x1080 60 Hz RB Input Signal Terminated RGB Analog DVI Digital Visual Inter face HDMI 0 7 Vp p 5 Separate H V sync Composite TTL level V high 2 2 0 V V low s 0 8 V Maximum Pixel Clock 164 MHz Power Supply AC 100 240 V 10 96 50 60 Hz x 3 Hz Signal Cable 15pin t
58. s active click the Properties button then follow next steps continually 5 Click Driver and then click on Update Driver then click on the Next button 6 Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk 7 Click the Browse button then choose A D Driver 8 Click the Open button then click OK button 9 Choose your monitor model and click the Next button then click Next button 10 Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button Using the Software 4 Select the Monitor tab 5 Click the Change button in the Monitor Type area 6 Choose Specify the location of the driver 7 Choose Display a list of all the driver in a specific location then click Next button 8 Click the Have Disk button 9 Specify A D driver then click OK button 10 Select Show all devices and choose the monitor that corresponds to the one you con nected to your computer and click OK 11 Continue choosing Close button and OK button until you close the Display Propert
59. see Not Optimum Mode Recommended Mode 1920 x 1080 60 Hz on the screen Troubleshooting You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds SXGA or 75 Hz a Not Optimum Mode Recommended Mode 1920 x 1080 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1920 x 1080 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals The monitor is in PowerSaver mode Press a key on the keyboard to activate the monitor and restore the image on the screen If there is still no image press the SOURCE button Then press any key on the keyboard again to activate the monitor and restore the image on the screen Connected using the DVI cable You may get a blank screen if you boot the system before you connect the DVI cable or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system cannot see the O
60. sound by connecting the soundcard of your PC to the mon itor Note The configuration at the back of the monitor may vary from product to product POWER S W POWER Introduction POMER SIN POWER CQ O M E R S W Switch the product on and off POWER Connect the power cord for your monitor to the POWER port on the back of the product HDMI IN DVI IN HDCP RGB IN HDMIIM DVIIN HDCP RGB IN HDMI IN Bae 7 NER um ae Connect the HDM Nterminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable DVI INHDCP Connect the DVI cable to the DV N HDCP port on the back of your product 9GB IN Connect the RGB N terminal at the back of your product to your computer amp AUDIO IN AUDIO OUT AUDIO IN Connect the audio cable for your product to the audio port on the back of your computer AUDIO OUT Headphone output terminal QO gt USB connection ter minal Option Que USB upstream port Connect the amp UP port of the product and the USB port of the computer with the USB cable pown USB downstream port Connect the amp DOWN port of the USB product and a USB device with the USB ca ble o m Kensington Lock 9 Stand Stopper Only ap plied to HAS or HAS USB type stand Introduction Note To use amp DOWN Downstream Port you have to connect the amp UP Upstream Ca ble to the
61. t 5 5 MENU Color Tone 2 SOURCE AUTO The tone of the color can be changed and one of four modes can be selected e Cool Makes whites bluish Normal Keeps whites white e Warm Makes whites reddish Custom Select this mode when you want to adjust the image according to your prefer ences MENU gt A4 54 l 54 v MENU Adjusting the Monitor Color Control FEM SOURCE Adjusts individual Red Green Blue color balance MENU a a Y OH sa eH sa t MENU Color Effect CEN SOURCE You can change the overall mood by changing the screen colors e Off This applies an achromatic color to the screen to adjust the screen effects Adjusting the Monitor e Grayscale The default colors of black and white are displayed e Green This applies the green color effect to a black and white screen e Aqua This applies the aqua color effect to a black and white screen e Sepia This applies the Sepia color effect to a black and white screen MENU a 5 MENU Gamma mr SOURCE Gamma correction changes the luminance of the colors with intermediate luminance e Mode 1 e Mode 2 e Mode 3 MENU a gt H l MENU Fine Adjusting the Monitor 2 SOURCE AUTO Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizo
62. t to fall leading to personal injury Samsung is not liable for these kinds of accidents Connections e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions A o mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface e Contact the nearest Samsung Service Center for more information Sam sung Electronics will not be responsible for damages caused by using a base other than those specified Please use Wall Mount according to the International standards Connecting Cables oyncMaster 2494HM Rear of Monitor Rear of Computer Connect the power cord for your monitor to the POWER N port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use a connection appropriate for your computer Using the D sub Analog connector on the video card e Connect the signal cable to the 15 pin D sub port on the back of your monitor Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI N HDCP Port on the back of your Monitor 55 Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub con nection cable Connect the AUDIO IN terminal of the monitor and the speaker output termi
63. the cable and external devices ask the service center of the cor responding product The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection Some products do not follow the USB standard and it may cause a malfunction of the device If the device malfunctions even if it is connected to the computer contact the service center of the device computer Connecting Headphone Note You may connect your headphones to the monitor 1 Connect your headphones to the Headphone connection terminal Connections Using the Stand Monitor Assembly Simple stand Simple USB stand HAS Stand HAS USB Stand O stand Stopper Note When rotating the monitor screen you should lift it to the maximum height of the stand and then lean the top backwards Otherwise the corners of the monitor screen may come into contact with the floor and become damaged Swivel stand Connections Using You can swivel the monitor left and right at an angle of 350 to set the monitor lengthwise The rubber under the stand is to avoid the monitor slide When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor the power cord of cable can be destroyed Tilt angle HAS Stand HAS USB Stand Using You can adjust the tilt angle within a range of 5 forward to 25 backward for the most comfortable viewing an
64. the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product There are only 16 colors shown on the screen The screen colors have changed after changing the vid Q Have the Windows colors been set properly Windows XP Set the resolution at the Control Panel Appearance and Themes Display Set tings A Windows ME 2000 Set the resolution at the Control Panel Display Settings Q Has the video card been set properly Set the video card by referring to the video card manual There is a message that reads Unrecognized monitor Plug amp Play VESA DDC monitor found Have you installed the monitor driver Install the monitor driver according to the Driver Installation Instructions Q See the video card manual to see if the Plug amp Play VESA DDC function can be Supported A Install the monitor driver according to the Driver Installation Instructions Problems related to Audio Q No sound A Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to Connecting Cables Troubleshooting Check the volume level Sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program Check
65. tor is adjustable do not place any ob ject or part of your body on the stand when lowering it This may cause damage to the product or the person carrying it Clean When cleaning the monitor case or the surface of the TFT LCD screen A N wipe with a slightly moistened and soft fabric L3 Do not spray cleaner directly onto the surface of the product DE uz e Otherwise this may result in the discoloration and distortion of 05 the structure and the screen surface may peel off Others Safety Instructions L3 Clean the product using a soft cloth with a monitor cleaner only If you must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 L3 When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L3 When cleaning the product make sure to disconnect the power cord Otherwise it may result in electric shock or fire L3 When cleaning the product disconnect the power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mosquito repellant lubricant or cleaner These may change the appearance of the product surface and peel off the indica tion labels on the product L3 Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratc
66. uct installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface Contact the nearest Samsung Service Center for more information Sam sung Electronics will not be responsible for damages caused by using a base other than those specified Please use Wall Mount according to the International standards Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the oper ating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button un SAMSUNG monitor installer Select the display edapter on which you vert l intel he monitor IL ROME ON 9220 Plug and Pine Morice Salad the motor which vou wemi bo install 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation EN The software you are installing for this
67. ur monitor e Connect the DVI Cable to the DVI MHDCP Port on the back of your Monitor 8 DVI IN HDCP Connected to a Macintosh e Connect the monitor to the Macintosh computer using the D sub con nection cable Connect the AUDIO IN terminal of the monitor and the speaker output terminal of your computer s sound card using a stereo cable sold sepa rately Note If the monitor and the computer are connected you can turn them on and use them Connecting HDMI TA Note You can connect digital output devices to your monitor You can enjoy better screen and sound quality Connections Connecting Using a HDMI Cable HOMI IM Input devices such as digital DVD are connected to the HDM Nterminal of the monitor using the HDMI cable When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital output terminal Select HDMI using the SOURCE button Connecting Using a DVI to HDMI Cable 4 HOMI TH Connect the DVI output terminal of a digital output device to the HDM Nterminal of the monitor using a DVI to HDMI cable Connect the red and white jacks of an stereo cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the AUD O N terminal of the monitor When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital
68. using your product for a long period of time put it into sleep mode or use a moving screen saver L3 Set a resolution and frequency appropriate to the product Otherwise your eyesight may be damaged Safety Instructions L When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing L3 If you continually move closer to the product screen your eye sight may be failing L3 To ease eye strain take at least a five minute break after every hour of using the monitor O Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations Otherwise it may fall and cause personal injury and or damage the product e Ifyou use the product in a location exposed to vibrations it may damage the product and result in fire L3 When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product Otherwise it may result in electric shock or fire L3 Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L3 If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage L3 Do not place
69. utomatic picture settings Dynamic Standard Movie and Cus tom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture set tings Adjusting the Monitor e Dynamic Select this mode to view a sharper image than in Standard mode e Standard Select this mode when the surroundings are bright This also provides a sharp image e Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue ex Custom Select this mode when you want to adjust the image according to your preferences Note e Itcan only be selected if an external input is connected to the HDMI terminal and the AV Mode is set to On MENU gt a Sa MENU Ce Color Not available in MagicBright mode of Dynamic Contrast MagicColor MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality e Off Returns to the original mode e Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left Adjusting the Monitor e Full Displays not only vivid natural color but also more realistic natural skin color with clearness e Intelligent Displays vivid natural color with clearness MENU gt 4 F g
70. vice urspr ilaa iha herum iere 5 Click Update Driver and select Install from a list or then click Next button Welcome to the Hardware Update Wizard Thin vase hipa pou natal soleas bor CAO Plug ard Play Mordo Chris ini mor 1 201 Digtal Tignan Microsoft finies IS Fnab a rar d ME pou hardwesan came milh an mirLaf inn CO i Napap disk iniit ib now To wise dinde adimi Uus alise nai Update Chiron To ondas dom hi m dos Ahas iya a hai des por vui t visa lo do C nakal E automatically Recommended eer ort nh ch Di ki inital b n a l i ox pecie location Advanced LlrvzvaEail To ensal theo ahon araro il Click Meat In continue Cancel ues emm 6 Select Don t search will then click Next and then click Have disk Using the Software Hardware Update Wizard Fieste chocce ous poach and inolallaton nplsons CI Sesek lai Has bett disa in haaa kababa Lies the check Esrse t bloss b kmi er epad the default seach v ch rude leal Mar denre Update Wizard Tissot the device drives pou mont l install los this hademe m Soke the manu acfurer are model of pour h i d ng devsos and then chek Hasi Il you have a dak that contana tha deser pou vant Ho natal click Haee Dhik pattes ered kamara texiai Thee beat dence lound Kal be rilaled 9 aree compatible Federaal Mode f Phug ang Pap Moria G Banh readh vall chesse the drva bo
71. when MagicTune does not function properly Q MagicTune Q A MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel Performance and Maintenance System Hardware Device Manager Monitors After deleting Plug and Play monitor find Plug and Play mon itor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune doesn t work properly Have you changed your PC or video graphic card Download the latest program The program can be downloaded http www sam sung com monitor magictune Did you install the program Reboot the computer after installing the program for the first time If a copy of the pro gram is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Note Visit the MagicTune website and download the installation software for MagicTune MAC Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly c
72. www samsung com vn Middle East amp Africa 0860 SAMSUNG 726 7864 http www samsung com za 444 77 11 800 SAMSUNG 726 7864 8000 4726 Horizontal Frequency http www samsung com tr http www samsung com ae The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The dis tance between two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The fre quency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per sec ond this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Plug amp Play Resolution Correct Disposal Authority Appendix Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Inter lace method is the same as that used in TVs This is a function that provides the best quality screen f
73. y reader HDD type MP3 player etc You can use other USB devices that can be connected to a computer Note When connecting a device to the DOWN port of the monitor connect the device using a cable appropriate to the device For the purchase of the cable and external devices ask the service center of the cor responding product The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection Some products do not follow the USB standard and it may cause a malfunction of the device If the device malfunctions even if it is connected to the computer contact the service center of the device computer Connecting Headphone Note You may connect your headphones to the monitor 1 Connect your headphones to the Headphone connection terminal Using the Stand Monitor Assembly Simple stand Simple USB stand Connections HAS Stand HAS USB Stand O Stand Stopper Note When rotating the monitor screen you should lift it to the maximum height of the stand and then lean the top backwards Otherwise the corners of the monitor screen may come into contact with the floor and become damaged Swivel stand Using You can swivel the monitor left and right at an angle of 350 to set the monitor lengthwise The rubber under the stand is to avoid the monitor slide When you try to rotate the monitor in the state of the power cord or ca
74. y result in fire L3 Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L3 Do not connect multiple appliances to the same power outlet Otherwise this may cause fire due to overheating L3 Do not disconnect the power cord while using the product Otherwise this may result in damage to the product due to electric shock L3 To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable This may cause electric shock or fire L3 Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Installation Be sure to contact an authorized Service Center when installing your N monitor in a location with heavy dust high or low temperatures high hu midity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor L3 Do not drop the monitor when moving it This may cause damage to the product or the person carrying it MC O Ensure that at least two persons lift and move the product EE c yy Otherwise it may be dropped and cause personal injury and NW or damage the product _ L3 When installing the product in a cabinet or rack m

Samsung 2494HM

Contents

Download Pdf Manuals

Related Search

Related Contents