Viewsonic LED LCD ND4210W
Contents
1. 2 To redirect the browser to the URL that you entered click Go The web page appears on your display ViewSonic ND4210w 27 ADMINISTRATION ADVANCED VIDEO CONFIGURATION To adjust the size and location of the video on the screen click Administration gt Advanced video The screen shown below appears Show IP Yideo Browser X of destination window 2048 Y of destination window 2048 Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Height of destination window 4096 Apply width of destination window 4096 Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe X of destination window type the center point of the screen on the X axis 2 Inthe Y of destination window type the center point of the screen on the Y axis 3 Inthe Width of destination window type the width of the destination window 4 Inthe Height of destination window type the height of the destination window 5 If any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save2. LS ND4210w Network Display ViewSonic 292 the choice of professionals This page left blank for dual sided printing Copyright O ViewSonic Corporation 2006 All rights reserved ViewSonic and the three birds logo are registered trademarks of ViewSonic Corporation Tivella and the Tivella logo are trademarks of Tivella Inc Cisco is a registered trademark and this document may include service marks of Cisco Systems Inc and or its affiliates in the U S and other countries Corporate names and trademarks are the property of their respective companies Disclaimer ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product In the interest of continuing product improvement ViewSonic Corporation reserves the right to change product specifications without notice Information in this document may change without notice No part of this document may be copied reproduced or transmitted by any means for any purpose without prior written permission from ViewSonic Corporation Product Registration To meet your future needs and to receive any additional product information as it becomes available please register your product on the Internet at www viewsonic com The ViewSonic product may come with a CD ROM that has a registration form to print and m
3. VETE init init Init init init TOTES ANDE Init Init init init ine init TOTES TLE init init TLES INTE Init INLE NTE TELE TOTES init init vei m License ro T STRING X a License T STRING o00rss000010499031611F5492C06071 DefaultFactorySetup T STRING SETUP NUMBER 2 NUMBER 9 build T_STRING Mon Feb 20 10 01 18 PST 2006 model name T STRING NMP 500 product T STRING NMP 500 Version T_STRING 2 00 RC6 macAddress T STRING DO Of manufactHardware T STRING manufactVendor T STRING manufactDate T STRING lHydraServerPort T STRING 8030 lHydraServeriddress T_STRING 192 168 12 99 BigHydraServeriddr T STRING 64 1 254 116 lightHydraMacUpdate T_STRING yes StartService xapp T STRING no StartService X11 T STRING yes startNtpclient T STRING no startInetd T STRING yes StartService mib mc T STRING no StartService tnet T STRING no startService rs232 T STRING no StartService kbd T STRING yes startService api T STRING no startService vtl T STRING no StartService pickch T STRING no StartService sigma T STRING yes startService sinfo T STRING yes StartService smb T STRING yes StartService mibevt T STRING no startService mibifc T STRING yes StartService mib T STRING yes StartService shell T STRING yes u m m m m Ta GTE Tm m m m m m mime mo moo i a mm om o o m m m m m m m m m m m m m m m ViewSonic ND4210w LICENSE To activate the licen
4. 28 ViewSonic ND4210w SECURITY To change the User name and Password of the ND4210w click Administration gt Security Current settings automatically appear in each field as shown below default User name Password is admin admin Show IP Video Browser Management a mo ar Repeat password ollo Apply Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe Password field type a new password 2 Inthe Repeat Password field re type the new password 3 If any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save ViewSonic ND4210w 29 SAVE CONFIGURATION To save your settings on the ND4210w click Administration gt Save Configuration The screen shown below appears Click Save Show IP Video Browser Save Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transpar
5. Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About Transparency between OSD and video layer 0 255 255 1 In the Transparency between OSD and video layer field type a number between O to 255 for a more or less transparent translucent browser image user interface so you can still see through the browser OSD On Screen Display shown below on the right with your video or other images 0 no OSD 255 no video 128 equal transparency between video and OSD layers OSD not transparent OSD very transparent 2 To apply the entered transparency value to the image on the ND4210w click Apply 26 ViewSonic ND4210w GO TO URL To go to a web page on the browser click Actions gt Go to URL The screen shown below appears Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 In the URL field type the desired URL Show IP Video Browser
6. Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About You must have VNC software running on your computer Video Audio Configuration ViewSonic ND4210w 15 This screen is used to adjust the display and audio parameters Click Management gt Video Audio The screen shown below appears Show IP Video Browser Brightness O Management Startup Contrast po gt 128 Browser 3 VNC Client KA gt Video Audio Saturation a 128 TAS FTP Server System Services Audio Channel Volume ao J 0 Audio Channel Yolume right o 0 Apply Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Move the Brightness slider values range between 128 and 127 2 Move the Contrast slider values range between O and 255 3 Move the Saturation slider values range between O and 255 4 Move the Audio Channel Volume left slider values range between O and 100 5 Move the Audio Channel Volume right slider values range be
7. Re dep C Ig losa 18 System Services Configuration 19 ViewSonic NDA210w lii ACTIONS Video UDP RTP Multicast 20 A es Eea RE EE eae mes bee MG 21 Video IP TW xd an ce c e dpa e e c c eom acte 22 VideO FIle 4 4 2 eic os ns d que ede Se Lea ter qr 23 moie a RA AA 24 VNC Client Actions llle 25 Transparencia E ad hoi AE rtp 26 GO 10 URG sired eses BG mee eee ee Enos E CER Bed MG 27 ADMINISTRATION Advanced Video Configuration 28 SECUN sca md eae o x e mito ce aa bern i on ata 29 Save Configuration cee ees 30 Default Settings Reset o oooooooooo 31 REDOO ses kam bine tet Eu pu ke maa NA emus 32 Firmware Upgrade ee ees 33 HELP Salsas eke Busco aan AOS kasalan 34 LICENSE ces O 35 Serial Number 0 00000 ee eee 36 ADO ne itta oe eee rata ere a arde 37 ViewSonic ND4210w APPENDIX ea er ic na 38 Management a 38 ACUON Sweat aie code nt aod Gee Ngo Se we a 39 Administration Ei a 40 aj f Seine AA AN 41 Customer Support 2 00 cee eee eee 42 Compliance and Safety Notices 43 FCC Class A Compliance Notice United States 43 Mercury Warning adu Ka cee e n a Ro mGA 43 Canadian Compliance Notice 44 GOST R Certification 44 European Compliance Notice 45 For Taiwan and Other Traditional Chinese M
8. FTP Server init maciddress T_STRING 00 0f System Services init manufactHardware T STRING Petrone init manufactVendor T STRING lt ee init manufactDate T STRING E init lHydraServerPort T STRING 8080 Video HTTP init lHydraServeriddress T_STRING 192 168 12 99 Video File init BigHydraServer ddr T STRING 64 1 254 116 Video IPTV init lightHydraMacUpdate T STRING yes Playlist init startService xapp T STRING no VNC Client init startService X11 T_STRING yes Transparency init startNtpclient T STRING no Go to URL init startIneta T_STRING yes Administration init startService mib mc T STRING no Advanced aided init startService tnet T STRING no Security init startService rs232 T STRING no Save Configuration init startService kbd T_STRING yes Default Settings init startService api T_STRING no Reboot init startService vtl T_STRING no Firmware init startService pickch T STRING no init startService sigma T STRING yes Status init startService sinfo T STRING yes License init startService smb T_STRING yes Serial number init startService mibevt T_STRING no About init startService mibifc T_STRING yes init startService mib T_STRING yes init startService shell T STRING yes wu d E LE m m m m Ta Se TR a m m m Um m t a i a dm m m m m m m m m m m m m m m m m m m m m m m m ViewSonic ND4210w CUSTOMER SUPPORT You need the product serial number when you contact Customer Support Country Region Website T Telephone for email addr
9. L Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe Macromedia Flash Transparency Source field select one of the options from the pull down menu 2 In the Screen rotation angle clockwise field select one from the pull down menu for the angle of rotation of the HTML content displayed on screen This feature is useful when the ND4210w is installed vertically 3 Inthe Browser Proxy field select Enabled or Disabled from the pull down menu 4 Inthe Browser Proxy IP field type an IP address if the Browser Proxy was Enabled 5 In the Browser Proxy PORT field type the port if the Browser Proxy was Enabled 6 Inthe Default transparency between OSD and video layer field type a number that is between O to 255 128 is average where video and graphics blend together Also see examples in the Transparency section of this guide e 0z Video only no graphics e 255 graphics only no video Continued ViewSonic ND4210w 13 7 Inthe Start screen display time field type the number of milliseconds you want the initial screen to be displayed at startup 1 millisecond 1 1000 second 8 In the Screen Height field type the height of the screen that is displaying your graphics image 9 Inthe Screen Width field type the width of the screen that is displaying your graphics image 10 If any changes were ma
10. P server is only for Network Displays with local storage The FTP server allows you to use an FTP client for uploading files 18 Management FP Server Show IP Yideo Browser Startup Browser VNC Client Video Audio TAS System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About FTP server config FTP server username admin FTP server password admin Apply ViewSonic ND4210w SYSTEM SERVICES CONFIGURATION Configure System Services in the MIB Management Information Base to manage the following groups Network Browser Video Audio TAS and System Services Click Management gt System services The screen shown below appears i Network Media Player port 6666 Yes v Management MIB Event Notification No v Startup Apply Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 In the Network Media Player port 6666 fie
11. Reboot Firmware Help Status License Serial number About 32 ViewSonic ND4210w FIRMWARE UPGRADE To upgrade the firmware on the ND4210w click Administration gt Firmware The screen shown below appears Click Browse to open the firmware file gt click Start upgrade iS MA Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About ViewSonic ND4210w Start tL 33 HELP STATUS Status refers to the log where you can track activity on a specific ND4210w To show the Status log click Help gt Status The screen shown below is for information only no inputs 34 Status in Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help License Serial number About init init 1ndt init init init
12. a Administration Server TAS separately through Tivella www tivella com or a Tivella dealer reseller A TAS server should be used to configure and manage multiple Network Displays remotely TAS provides centralized scheduling of video content presentation on multiple Network Displays as well as management and seamless operation of a Cisco ACNS Content Distribution Networking infrastructure if one is installed This configuration greatly reduces maintenance overhead when TAS and the Network Display are connected to the network LAN WAN with the TAS acting as a manager for multiple Network Displays ND4210w OC eN ud ta na Network Display ODER or Router 2 ViewSonic ND4210w Two MODES OF COMMUNICATION There are two modes of communication with the ND4210w Network Display an HTTP web interface and a Telnet advanced command line interface This document focuses on the web interface only FEATURES e Integrated display for A V IP delivery Multiple Network Displays can be daisy chained with different IP addresses e Supports scheduling of different video content across multiple displays e No need for additional external PC or set top box with a switch e Remote management control and status reporting e MPEG A V decoding MPEG 1 2 4 Macromedia Flash e Auto MDIX no crossover cabling e Powerful combination of the Sigma Design EM8621L and the Freescale MPC8247 for smooth playback e Can be installed with an opti
13. adian Department of Communications French Le present appareil numerique nemet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Canada ICES 003 Class A prescrites dans le reglement sur le brouillage radioelectrique edicte par le Ministere des Communications du Canada AN WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures GOST R CERTIFICATION nr This product is GOST R certified A146 44 ViewSonic ND4210w EUROPEAN COMPLIANCE NOTICE Products with the CE Marking comply with both the EMC Directive 89 336 EEC and the Low Voltage Directive 73 23 EEC issued by the Commission of the European Community Compliance with these directives implies conformity to the following European Norms e EN55022 CISPR 22 Class A Radio Frequency Interference e EN55024 IEC61000 4 2 4 4 4 5 4 6 4 11 e EN60950 IEC950 Product Safety CE A WARNING This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures For EU member states only as follows The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002 96 EC WEEE The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste but use the return a
14. ail or fax to ViewSonic Corporation For Your Records Model Name ND4210w Model Number VS11571 Document Number ND4210w UG ENG REV 1B 11 OCT 2006 Serial Number Purchase Date Product disposal at end of product life ViewSonic is concerned about the preservation of our environment Please dispose of this product properly at the end of its useful life Your local waste disposal company may provide information about proper disposal ViewSonic ND4210w This page left blank for dual sided printing ViewSonic ND4210w Contents INTRODUCTION Packaged Contents 0 a 1 Optional Accessory cece ee eee 1 Requirements aaa 1 Two Modes of Operation o o oooooco 2 Standalone 542 x Use Rd Sen Gia Hah dl defi rs 2 TAS Managed 1 5222 nacre de dere de ete 2 Two Modes of Communication 3 Features us 5a ad Sour a AE Rabb 3 Front VIOW d quien px doe secat d oa eod de deiode 4 O E 5 Remote Control 2 0 0 0c ce eee 6 SETTING UP THE NETWORK DISPLAY Connect to a Switch or Router 7 Turn Power On to the Network Display 9 Put Batteries in Remote Control 10 Eos mmu cp IP ETT 10 MANAGEMENT Startup URL Network Configuration 11 Browser Configuration 000 eee eee 13 VNC Client Management lues 15 TAS CONnNGUIAIION 3 2 23 9 9 24 3 nde acia 17 FIP SENET pira mue UE po
15. arkets 46 China CCC Mark 0 00 00 cee ee 46 Declaration of ROHS Compliance 47 Cleaning the Device 0 00 eee eee 49 Data Loss Disclaimer 49 Specifications vi xcd a do Sie eS REX XX Ea 50 Limited Warranty 0 cece ee eee eee 51 ViewSonic ND4210w vi This page left blank for dual sided printing ViewSonic ND4210w INTRODUCTION Thank you for buying the ViewSonic Network Display This section introduces you to the ND4210w Network Display PACKAGED CONTENTS Please check that all the following items are in the package Des ioe oof B Remote Control with two AA batteries ND4210w Network Display with detachable speakers Quick Start Guide Multi Region Power Cords OPTIONAL ACCESSORY The Wall Mount Kit accessory is available at viewsonic com REQUIREMENTS The ND4210w Network Display requires e ViewSonic ND4210w Network Display connected to AC power and a network or internet connection e Streaming video server and or live encoder e If using the VNC Client feature be sure to install VNC software on your PC sold separately ViewSonic ND4210w 1 Two MODES OF OPERATION STANDALONE The setup allows the ND4210w Network Display to act as an independent network device controlled by one server Ethernet cable Ethernet cable ND4210w Network Display Switch or Router TAS MANAGED You can purchase Tivell
16. artup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to LIRL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware yer E e Help Status License Serial number About Start Stop LI Start Stop aS ViewSonic ND4210w 39 ADMINISTRATION 40 Administration Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About Start Upgrade ViewSonic ND4210w HELP A _show 1p video Browser init License ro T STRING Y Management init License T STRING 000F5500001049903146141F5492C0607A4 init DefaultFactorySetup T STRING SETUP NUMBER 2 NUMBER 9 Startup init build T STRING Mon Feb 20 10 01 18 PST 2006 EXE init model name T STRING NMP 500 Video Audio init product T_STRING NMP 500 TAS init version T_STRING 2 00 RC6
17. boot Firmware Help Status License Serial number About ViewSonic ND4210w 23 PLAYLIST To stream existing video Playlists on an HTTP server click Actions gt Playlist The screen shown below appears Show IP Video Browser rt Start Stop Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 In the URL field type the URL that corresponds to the Playlist to appear on the display for example http 192 168 12 x playlist txt or type the address to start playback such as http lt server ip gt playlists pls 2 To tell the system to listen to the Playlist from the entered URL click Start To create a playlist A Playlist is a text file that can be created in any text editor with an extension of txt A Playlist is necessary when you want the ND4210w to play specific content in a specific order usually looped You can create a looped Playlist for the http streams as shown below For a Playlist that is not looped list the desired content without the keyword loop loop http http 192 168 12 x movie1 mpg http http 192 168 12 x
18. de to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save IMPORTANT NOTE Due to memory limitations certain large flash files may not work correctly 14 ViewSonic ND4210w VNC CLIENT MANAGEMENT The VNC client configuration screen shown below on the Management menu lets you set the device to start as a VNC client and connect automatically to the VNC server specified This auto start feature works only if the VNC client under System services is set to YES or Enabled VNC server password must be at least 6 characters can be alpha numeric X and Y coordinates let you set the size of the window of the remote desktop displayed if full screen is not desired VNC full screen mode lets you set the client to start up as full screen all the time VNC auto restart mode reconnects the client in the event of network interruption Delay before restart VNC sets the time between reconnects YNC client confiouration VNC server address oo VNC server password EA X coordinate of VNC windows left top corner 0 Y coordinate of YNC induere fet ron corner o Show IP Video Browser Management Startup Browser P UNG Client Video Audio TAS FTP Server System Services NC full screen mode No gt NC auto restart mode No Delay in milliseconds before restart VNC 5000
19. ency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 30 ViewSonic ND4210w DEFAULT SETTINGS RESET To restore the ND4210w back to factory settings click Administration gt Default settings The screen shown below appears Click Restore User defined settings will be lost Or press and hold the RESET button on the back of the display for five 5 seconds to restore the default settings Show IP Video Browser Restore Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About ViewSonic ND4210w 31 REBOOT To reboot the ND4210w click Administration gt Reboot The screen shown below appears Click Reboot The ND4210w reboots ei HEN Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings
20. er Na Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Browser http www viewsonic com MAC address 00 0f 44 00 00 01 DHCP IP address Default gateway DNS server IP address Disabled vw 192 168 12 103 255 255 255 0 192 168 12 1 192 168 12 1 Apply Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 To play a particular video at startup in the Video field enter a valid HTML page Here are some examples e http lt ip address gt lt mpeg 1 2 file located on WEB Server e udp lt ip multicast address gt port e rtp lt multicast address gt port e iptv sip multicast address videoport audioport e playlist http lt ip address gt lt playlist file located on WEB server For more information about creating and playing a playlist with specific content in a specific order looped or not looped see the PLAYLIST section in this guide Continued ViewSonic ND4210w 11 2 Inthe Browser field enter a startup web screen for example http www viewsonic com Note The MAC address is a read only field that displays
21. ess also F FAX United States viewsonic com T 800 688 6688 F 909 468 1202 866 463 4775 909 468 5814 0800 833 648 01794 500801 Canada viewsonic com United Kingdom viewsoniceurope com Ud MA Europe Middle East Baltic viewsoniceurope com Contact your reseller countries and North Africa 866 2 2246 3456 866 2 8242 3733 Taiwan viewsonic com tw Australia and New Zealand viewsonic com au T 61 2 9929 3955 F 61 2 9929 8393 Singapore India and viewsonic com sg T 65 273 4018 Southeast Asia F 65 273 1566 T F Other Asia Pacific countries South Africa viewsonic com asia T 886 2 2246 3456 F 886 2 8242 3668 Contact your reseller 42 ViewSonic ND4210w COMPLIANCE AND SAFETY NOTICES FCC CLASS A COMPLIANCE NOTICE UNITED STATES This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at user s own expense You can determi
22. get to save settings and reboot the system ViewSonic ND4210w ABOUT To show the current version of the product click Help gt About The screen shown below appears information only rT MA Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About ViewSonic ND4210w Build date and time 37 APPENDIX SCREENS MANAGEMENT 38 a Management Show IP Video Browser Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About coordinate i Audio Chi 255 255 255 0 192 168 12 1 192 168 12 1 Apply 2 VNC server ai annel Volume righ ViewSonic ND4210w ACTIONS i Show IP Video Browser Management St
23. lay to either a switch or a router with DHCP services See your IT Administrator for a code to the switch or a router Connect the AC power cord from the Network Display to an AC power source like a wall outlet ND4210w Network Display back view B RJ 45 Ethernet cable HJ 45 Ethernet cable Me AC Power cord PA Ca a a a Switch or Router ViewSonic ND4210w Connect Multiple Network Displays optional You can daisy chain several Network Displays together The two built in Ethernet ports make the ViewSonic Network Displays unique because you do not need separate network switches or PCs for each Network Display Media content on each Network Display can be scheduled independently when connected to an external server Plug another RJ 45 Ethernet cable into an Ethernet port of another Network Display You can connect either of the two Ethernet ports of one unit to either of the two Ethernet ports of another unit Back view go E ES Ethernet cable to Ethernet cable to Ethernet ports Ethernet ports oo KX ee 8 ViewSonic ND4210w Connect External Speakers optional speaker speaker 2 TURN POWER ON TO THE NETWORK DISPLAY Wait for the splash screen to appear with the IP address Make a note of the IP address on a piece of paper because you will need this in another step Power Button ViewSonic ND4210w 3 PUT BATTERIES IN REMOTE CONTROL 10 Remove the back cover fr
24. ld select Yes to access the ND4210w using a Telnet client on port 6666 If you do not want this select No 2 Inthe MIB Event Notification field select Yes to be notified of changes that you made to the ND4210w settings 3 If any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save ViewSonic ND4210w 19 ACTIONS This section mainly concerns video related activities Video can be streamed by UDP RTP IP TV or HTTP stream and organized in Playlists When you initiate a stream you can see the video on your display You can also change the Transparency of the OSD or go to a specific URL on the fly VIDEO UDP RTP MULTICAST This screen allows you to play streams using assorted protocols Select Actions gt Video Multicast The screen shown below appears Startup Start Stop Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 In the IP address field type the IP Address transmitting UDP RTP based multicast stream for example 239 1 1 7 2 In the Port field type the Po
25. movie2 mpg http http 192 168 12 x movie3 mpg 24 ViewSonic ND4210w VNC CLIENT ACTIONS To use VNC Client you must have VNC software running on your PC sold separately The VNC Virtual Network Computing client screen shown below allows you to connect and display a remote desktop running a VNC server Show IP Video Browser YNC server Password Management Startup Browser VNC Client Video Audio TAS Start Stop FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe VNC server field type the IP Address of the VNC server 2 Inthe Password field type the password of the VNC server whose IP is entered above IMPORTANT The password must be at least six 6 characters can be alpha numeric 3 To display the remote desktop click Start ViewSonic ND4210w 25 TRANSPARENCY To change the transparency of the browser on screen in relation to the video image in the background click Actions gt Transparency The screen shown below appears Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast
26. nd collection systems according to local law ViewSonic ND4210w 45 FOR TAIWAN AND OTHER TRADITIONAL CHINESE MARKETS A WARNING This is a Class A Information Product when used in residential environment it may cause radio frequency interference under such circumstances the user may be requested to take appropriate countermeasures Note Product BSMI approval license number is on the product label outside the system enclosure BAG AA APART TARANTA A ERAS AAA AAA la OR te gt EORR RM BSM PEA GARIN RE Gh ERE 7 CHINA CCC MARK O AN WARNING This is a Class A Device It may cause radio frequency interferences if used in residential environment in this case it may be required to have countermeasures CCC Class A Declaration AAS th CENA A ERA RA E RARA F A Bem A R HFAA Sc n 1115 fe o 46 ViewSonic ND4210w DECLARATION OF ROHS COMPLIANCE This product has been designed and manufactured in compliance with Directive 2002 95 EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS Directive and is deemed to comply with RoH the maximum concentration values issued by the European Technical Adaptation Committee TAC as shown below COMPLIANT Concentration Concentration Cadmium Cd lt 0 01 Hexavalent Chromium Cr lt 0 1 Polybrominated biphenyls PBB lt 0 1 Polybrominated diphenyl ethers PBDE lt 0 1 Certain c
27. ne whether your equipment is causing interference by turning it off If the interference stops it was probably caused by this equipment or one of its peripheral devices If the equipment causes interference to radio or television reception try to correct the interference by using one or more of the following measures Turn the television or radio antenna until the interference stops e Move the equipment to one side or the other of the television or radio e Move the equipment farther away from the television or radio e Plug the equipment into an outlet that is on a different circuit from the television or radio That is make certain the equipment and the television or radios are on circuits controlled by different circuit breakers or fuses Modifying the equipment without proper authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices In that event your right to use the equipment may be limited by FCC regulations and you may be required to correct any interference to radio or television communications at your own expense A MERCURY WARNING This product contains mercury Dispose of in accordance to local state and federal laws ViewSonic ND4210w 43 CANADIAN COMPLIANCE NOTICE English This digital apparatus does not exceed the Canada ICES 003 Class A limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Can
28. om the remote control as shown below Put two AA batteries in the remote control Be sure to match the positive end of the battery with the positive end of the compartment Put the cover back on the remote control LOGIN Open an Internet Browser i e Internet Explorer on a PC in the same network In the URL address field type the IP address of the ND4210w noted in a previous step gt press Enter The Login screen appears Type the defaults Login admin and Password admin For security purposes we recommend that you change the default IP address Login and Password For more information see the Security section in this user guide After logging in successfully the Network Configuration screen appears as shown on the next page Note The ND4210w automatically logs you out after fives minutes of inactivity For information on how to change network settings on an OS other than Windows please consult the OS user guide or your Network Administrator ViewSonic ND4210w MANAGEMENT STARTUP URL NETWORK CONFIGURATION The Network Configuration screen allows you to select the video that appears on screen when you boot up the ND4210w To go to the Network Configuration screen after logging into the ND4210w select Management gt Startup The Startup URLs screen and the Network Configuration screen appears as shown below Displays the IP address Displays the Video source Displays the Browser Show IP Video Brows
29. omponents of products as stated above are exempted under the Annex of the ROHS Directives as noted below Examples of exempted components are 1 Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of ROHS Directive 2 Lead in glass of cathode ray tubes electronic components fluorescent tubes and electronic ceramic parts e g piezoelectronic devices 3 Lead in high temperature type solders i e lead based alloys containing 85 by weight or more lead 4 Lead as an allotting element in steel containing up to 0 35 lead by weight aluminium containing up to 0 4 lead by weight and as a cooper alloy containing up to 4 lead by weight ViewSonic ND4210w 47 Important Safety Instructions Dog s e INO a 10 11 12 13 14 15 16 17 48 Read these instructions completely before using the equipment Keep these instructions in a safe place Heed all warnings Follow all instructions Do not use this equipment near water Clean with a soft dry cloth If further cleaning is required see Cleaning the device in this guide for further instructions Do not block any ventilation openings Install the equipment in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat Do not attempt to circumvent the safet
30. onal wall mount Uses Tivella content management software Devices can be remotely controlled from virtually anywhere with a network or internet connection Wireless Ethernet support eliminates the need to run cables to an existing network e Remote management allows you to adjust the screen and see valuable information without being physically in front of the unit e Network ready easy installation e Local content buffering or storing in hard drive e AJAX support in browser ViewSonic ND4210w FRONT VIEW Detachable Detachable speaker speaker POWER turns screen audio power off CH A changes stream channel in development CHY changes stream channel in development VOL raises the volume VOL lowers the volume MENU shows the IP address on the screen INPUT cycles the screen from Video Browser or 50 50 transparency 4 ViewSonic ND4210w BACK VIEW ViewSonic ND4210w RESET button Press and hold the RESET button for five 5 seconds to restore the default settings REMOTE CONTROL POWER button amp On Standby Y ik m 7 d E EL aja Mi E A PG Maggi uF E Atv PLAYIPAUSE FF REPLAY stor LAW O O c HOME OUTPUT die Show IP INFO O 9 REPEAT A VIDEOS MUSIC PICTURES MACIO ViewSonic ViewSonic ND4210w SETTING UP THE NETWORK DISPLAY 1 CONNECT TO A SWITCH OR ROUTER Connect an RJ 45 Ethernet cable from the Network Disp
31. red on any media or any part of any Product serviced hereunder IF DURING THE REPAIR OF THE PRODUCT THE CONTENTS OF THE DEVICE ARE ALTERED DELETED OR IN ANY WAY MODIFIED VIEWSONIC IS NOT RESPONSIBLE WHATSOEVER YOUR PRODUCT WILL BE RETURNED TO YOU CONFIGURED AS ORIGINALLY PURCHASED SUBJECT TO AVAILABILITY OF SOFTWARE ViewSonic ND4210w 49 SPECIFICATIONS Default resolution 1366 x 768 O 60 Hz WXGA Dimensions 48 W x 29 H x 12 D with stand 1243 mm W x 739 mm H x 304 mm D with stand Display area 42 diagonal LCD screen 930 25 mm H x 523 01 mm V Weight 72 6 Ibs net 90 2 lbs gross 33 kg net 41 kg gross Connectivity Network RJ 45 x 2 for Daisy Chain feature 10 100 Ethernet Audio Audio output 2 x RCA stereo analog Internal analog stereo to power amp Communication USB x 2 Streaming protocol types HTTP UDP RTP IP TV Local file playback Video decoding formats MPEG 1 MPEG 2 MPEG 4 Macromedia Flash Audio decoding formats MPEG 1 Layers 1 amp 2 MP3 WAV Image file formats JPEG PNG Memory RAM 128 MB Memory FLASH 64 MB Number of colors 16 7 million 8 bit Power consumption 240 watts Max Power input AC 100 240 V max 50 60 Hz Contrast ratio 1600 1 Typical 1200 1 Min Viewing angle Over 178 Operating temperature 0 40 C 32 104 F Regulatory appro
32. rt number used to receive the multicast 3 To tell the system to listen to the UDP RTP multicast stream from the IP on the Port that you entered click Start 20 ViewSonic ND4210w VIDEO HTTP To get to the browser setup screen click Actions gt Video HTTP The screen shown below appears Show IP Video Browser urs Start Stop Management Startup Browser VNC Client Video Audio TAS FTP Server System Services P actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Transparency Go to LIRL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe URL field type the URL that corresponds to the HTTP stream that you want to appear on the display for example http 192 168 12 x movie mpg or http lt server ip gt file mpg 2 To tell the system to listen to the HTTP stream from the entered URL click Start ViewSonic ND4210w 21 VIDEO IPTV The Video IPTV screen allows you to play Split Stream files where the video and audio information being streamed is in two different addresses This is similar to RTP and UDP multicast except the values for video and audio are entered separately To get to the Video IPTV screen click Actions gt Video IPTV The screen shown below appears 1 P Actions Show TP B video B Dom AE Au rr rr Management Startup Brow
33. s shall be placed on the apparatus Do not open it or there may be risk of electric shock CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The socket outlet shall be installed near the equipment and shall be easily accessible ViewSonic ND4210w CLEANING THE DEVICE 1 Make sure the device is turned off 2 Wipe the device with a clean soft lint free cloth This removes dust and other particles If still not clean apply a small amount of glass cleaner with no alcohol ammonia benzene paint thinner gasoline or acetone onto a clean soft lint free cloth and wipe the device NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE DEVICE Disclaimer ViewSonic is not liable for damage resulting from using any ammonia or alcohol based cleaners DATA LOSS DISCLAIMER Before sending the device out for service be sure to backup all data and remove all third party software features parts options alterations and attachments not warranted by ViewSonic prior to sending the product to ViewSonic for service ViewSonic is not liable for any loss or damage to these items With respect to all service provided it is your responsibility to backup the contents of your device including any data you have stored or software you have installed on the device It is likely that the contents of your device will be lost in the course of service and ViewSonic will not be responsible for any damage to or loss of any programs data or other information sto
34. se on the ND4210w click Help gt License The License Key may appear automatically in the screen shown below read only e Show IP Video Browser Management ee PROD Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About ViewSonic ND4210w 35 SERIAL NUMBER The Serial Number screen allows you to enter the Serial Number of the product Click Help gt Serial number The screen shown below appears Once entered the information cannot be changed jp 2 36 Help In the Serial Number field type the Serial Number gt click Apply Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VMC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Status License Serial number About Look at the back of the device and record the Serial Number of the product Serial Number 0000 0000 0000 0000 After the change please do not for
35. ser VNC Client Video Audio TAS FTP Server System Services Start Stop Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTV Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About Under Video enter the IP Address and Port of the Video stream 2 Under Audio enter the IP Address and Port of the Audio stream 3 Click Start 22 ViewSonic ND4210w VIDEO FILE The Video File screen allows you to play video files stored in the internal Hard Drive Click Actions gt Video File and the screen shown below appears The location of the hard drive is tmp ftproot hd1 1 In the Video File field type tmp ftproot hd1 sample video mpg then click Start 2 If the video file is inside a folder example movie in the hard drive type tmp ftproot hd1 movie sample video mpg ND4210wv Video File Show IP Video CRINE Path in local file system m m Management Start Stop Startup Browser VNC Client Video Audio TAS FTP Server System Services Press Stop to end gt Actions the video not Pause Video UDP Multicast Video RTP Multicast Video HTTP Video File Press Start to start the Client i Bi Transparency video from the beginning Go to URL Administration Advanced Video Security Save Configuration Default Settings Re
36. the built in MAC address of the unit 3 Inthe DHCP field of the Network Configuration screen tap the down arrow for the pull down menu and select Enabled to dynamically get network parameters Make sure there are values in the IP address Mask Gateway and DNS fields although DHCP assigns values to these fields automatically If you select Disabled type valid network parameters in these fields 4 f any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save 12 ViewSonic ND4210w BROWSER CONFIGURATION The Browser Configuration screen allows you to make specific screen settings for a specific URL that you chose Click Management gt Browser The screen shown below appears Note 1 millisecond 1 1000th second Macromedia Flash Transparency Source Browser Y Screen rotation angle clockwise O iM Browser Proxy IP Show IP Video Browser Management Startup Browser VNC Client Video Audio TAS FTP Server System Services Browser Proxy PORT 0 Default transparency between OSD and video layer 155 0 255 Start screen display time millisecs 5000 Screen Height 768 Apply Actions Video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to UR
37. tween O and 100 6 If any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save 16 ViewSonic ND4210w TAS CONFIGURATION This screen works in conjunction with TAS TAS software can be purchased through Tivella at www tivella com or through an authorized Tivella dealer reseller Click Management gt TAS The screen shown below appears Timeout sec 20 Show IP Video Browser p Management Startup Browser VNC Client Video Audio TAS FTP Server System Services IP Address tas intranet Apply Actions video UDP Multicast Video RTP Multicast Video HTTP Video File Video IPTY Playlist VNC Client Transparency Go to URL Administration Advanced Video Security Save Configuration Default Settings Reboot Firmware Help Status License Serial number About 1 Inthe Timeout sec field type the number of seconds for the ND4210w to access TAS 2 Inthe IP Address field is a valid DNS name automatically generated by TAS when connected to a network but empty when used as a standalone 3 If any changes were made to this screen do the following e To enable the changes click Apply e To save the changes click the Administration menu gt click Save Configuration gt click Save ViewSonic ND4210w 17 FTP SERVER FT
38. vals FCC 15A IC cETLus CE C Tick NOM TUV S Mark CB SASO SABS CCC BSMI PSB GOST R RoHS Optional accessories Wall mount kit Specifications are subject to change without notice Corporate names and trademarks stated herein are the property of their respective companies 50 ViewSonic ND4210w LIMITED WARRANTY Please go to the Customer Support table in this guide for the ViewSonic website in your region to get warranty information ViewSonic ND4210w 51 ViewSonic 484 the choice of professionals
39. y provisions of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade and the third prong are provided for your safety If the plug does not fit into your outlet consult an electrician for replacement of the outlet Protect the power cord from being tread upon or pinched particularly at the plug and the point where if emerges from the equipment Be sure that the power outlet is located near the equipment so that it is easily accessible Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the equipment When a cart is used use caution when moving the cart equipment combination to avoid injury from tipping over Unplug this equipment when it will be unused for long periods of time Refer all servicing to qualified service personnel Service is required when the unit has been damaged in any way such as if the power supply cord or plug is damaged if liquid is spilled onto or objects fall into the unit if the unit is exposed to rain or moisture or if the unit does not operate normally or has been dropped To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vase
Download Pdf Manuals
Related Search