Baumatic PVC2SS hob
Contents
1. Instruction manual User Manual for your Baumatic PVC2SS Pythagora 30cm 2 hyperspeed zone ceramic domino hob osx Baumatic You will be mine NOTE This User Instruction Manual contains important information including safety amp installation points which will enable you to get the most out of your appliance Please keep it in a safe place so that it is easily available for future reference for you or any person not familiar with the operation of the appliance DD 20 12 06 2 Contents Environmental note Important safety information Specifications Product and aperture dimensions Product specifications Standard accessories Optional extra Electrical details Ceramic hob surface layout Using the ceramic hob Before first use Control knobs Turning on a zone and setting a power level Residual heat indicator Hob guidelines Cleaning and maintenance Cleaning the ceramic hob top After each use Cleaning table Using a ceramic hob scraper Using a specialist ceramic hob cleaner Installation Positioning Unpacking the appliance Installing the appliance Electrical connection Connecting the mains supply cable Replacing the mains supply cable My appliance isn t working correctly Baumatic Ltd Conditions of Guarantee Contact details ul l WO 0 2i 22 11 12 16 18 19 20 Environmental note T2. you should call the Baumatic Service Department o A humming sound is heard when a cooking zone is selected This is normal the sound will disappear when the zone heats up o The cooking zones have become discoloured This maybe caused by burnt on remnants of food This will not affect the working of the appliance However you should make sure that the cleaning instructions are being followed regularly o Only one of the zones on my hob are working You should recheck that the terminal screws are all fully tightened between the links IMPORTANT If your appliance appears not to be operating correctly then you should disconnect it from your mains supply and then contact the Baumatic Service Department on telephone number 0118 933 6911 DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault then you may be liable for the cost of the call out charge The appliance must be accessible for the engineer to perform any necessary repair If your appliance is installed in such a way that an engineer is concerned that damage will be caused to the appliance or your kitchen then he will not complete a repair This includes situations where appliances have been tiled in sealed in with sealant have wooden obstructions placed in front of the appliance like plinths Or any insta
3. and in compliance with Baumatic s instructions Before connecting the appliance make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage WARNING THIS APPLIANCE MUST BE EARTHED o This appliance must be wired into a 13 A double pole switched fused spur outlet having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance It should not be located above the appliance and no more than 1 25m away from it o The spur outlet must still be accessible even when your oven is located in its operating position o Cable type HO5 RRF 3 core x 2 5 mm2 Connecting the mains supply cable o The mains terminal block is located on the underside of the hob and the terminals are accessible by removing the terminal block cover by removing the cover screw Mains cable entry point o The cable connections must be in accordance with the diagram located on the bottom of the hob O O N The brass links must be positioned as marked in the appropriate diagram and once established ALL terminal screws must be tightened down firmly If when the hob is first switched on only one of the zones work you should recheck that the terminal screws are all fully tightened between the links This should be done before contacting the Baumatic Service Department The cable can be looped if necessary but make sure that is not kinked or trapped when the hob is in positio
4. appliance is designed for domestic household use and for the cooking and frying of domestic foodstuffs o IMPORTANT The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85 C above the ambient temperature of the room it is located in whilst in use o Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above o Any damage caused by the appliance being installed in contravention of this temperature limit will be the liability of the owner o Your new appliance is guaranteed against electrical or mechanical defects subject to certain exclusions that are noted in Baumatic s Conditions Of Guarantee The foregoing does not affect your statutory rights o The use of this appliance for any other purpose or in any other environment without the express agreement of Baumatic Ltd will invalidate any warranty or liability claim o You should not use this appliance to store items on or as a work surface o No modifications to the appliance are permitted by Baumatic Ltd o You should not store or place flammable or highly flammable liquids materials on top of or near the appliance Items made from aluminium plastic or plastic film should also be kept away from the appliance as they may fuse to the surface o Repairs may only be carried out by Baumatic Service Engineers or the
5. by the manufacturer of the specialist ceramic hob cleaner You should ensure that it is suitable for use on your appliance Installation The installation must be carried out by a suitably qualified person in accordance with the current version of the following o UK Regulations and Safety Standards or their European Norm Replacements o Building Regulations issued by the Department of the Environment o Building Standards issued by the Scottish Development Department o IEE Wiring Regulations o Electricity At Work Regulations Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85 C above the ambient temperature of the room it is located in during periods of use This appliance is classified as Class 3 and therefore is to be built into a kitchen unit depending on size or 600 mm worktop providing the following minimum distances are allowed o 700 mm between the hob surface and the underside of any horizontal surface above it o 50mm clearance around the appliance and between the hob surface and any combustible materials Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging 1 Baumatic hob 4 Fixing clamps 1 Ceramic hob scraper 4 Fixing screws 1 Installation and instruction manual 1 Sealing strip 1 Baumatic guarantee card 14 Installing the appliance o Cut a hole in th
6. mm of enameled steel and 4 6 mm for stainless steel with sandwich type bottoms If these rules are not followed then there will be a great loss of heat and energy Heat not absorbed by the saucepan will spread to the hob frame and surrounding cabinets Preferably cover pans with a lid to permit cooking at a lower heat Always cook vegetables and potatoes etc in as little water to reduce cooking times Food or liquid that has high sugar content may damage the hob top if it comes into contact with the ceramic hob surface Any spillages should be wiped up immediately however this may not prevent the hob surface from becoming damaged IMPORTANT The ceramic hob surface is tough however it is not unbreakable and can be damaged Especially if pointed or hard objects are allowed to fall on it with some force DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED YOU SHOULD CONTACT THE BAUMATIC SERVICE DEPARTMENT IMMEDIATELY Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool The appliance should be disconnected from your mains supply before commencing any cleaning process Cleaning the ceramic hob top A A A Any residues that are left on the hob top surface from cleaning agents will damage it You should remove any residues with water and a little washing up Abrasive cleaners or sharp objects will damage the hob surface you should clean it using water and
7. a little washing up liquid Although it is easier to clean some deposits whilst the hob surface is still warm You should take care not to burn yourself if cleaning the hob surface when it is still warm After each use o Wipe the appliance over with a damp cloth and a little washing up liguid o Dry the appliance by rubbing the surface with a clean cloth Cleaning table Type of deposit Remove Remove What should I immediately when the use to remove appliance the deposit has cooled down Sugar or Yes No Ceramic hob food liguid scraper containing sugar Tin foil or plastic Yes No Ceramic hob scraper Fat splashes No Yes Ceramic hob cleaner Metallic No Yes Ceramic hob discolourations cleaner Water splashes or No Yes Ceramic hob water rings cleaner Using a ceramic hob scraper Your appliance will be provided with your appliance The following guidelines should also be followed when using the ceramic hob scraper o The scraper should be placed on the ceramic surface at an angle o Residues should be removed by sliding the blade carefully over the ceramic surface o The ceramic surface should be wiped with a damp cloth and a small amount of washing up liquid o Dry the appliance by rubbing the surface with a clean cloth 13 Using a specialist ceramic hob cleaner It is possible to purchase specialist ceramic hob cleaner conditioner You should follow the instructions given
8. ber ouun ccccccccceeesseeeeees Serial Number as Date of Purchase aaaeeeaa Ceramic hob surface layout 1 80 kW hyperspeed zone 1 20 kW hyperspeed zone Control knobs Using the ceramic hob Before first use IMPORTANT You should clean the ceramic hob surface see Cleaning and maintenance section o You should switch on one cooking zone at a time for 5 minutes at the maximum setting This will help to eliminate any new smell that exists and evaporate any humidity that has formed on the heating elements during transit Do not burn off more than one zone at once Do not place a pan on the ceramic hob until this burn off process has been completed Control knobs O O All operations are performed by means of the 2 control knobs that can be found at the front of the hob top The control knob should be turned anti clockwise to select a heating level The numbers around the outside of each control knob indicates the power level that you have set the zone to A marking to the bottom right of each control knob indicates which zone that it controls Turning on a zone and setting a power level O O Turn the control knob anti clockwise of the zone that you wish to cook on The red ON OFF neon will come on Each cooking zone can be adjusted between 1 and 11 one being the coolest zone setting and eleven being the hottest zone setting O When you have finished cooking make sure that y
9. e care will be taken Baumatic Ltd cannot accept responsibility for damage sustained to any property whatsoever in this process This guarantee is in addition to and does not diminish your statutory or legal rights Contacting Baumatic Ltd Sales Service Spares Technical Advice TEL 0118 933 6900 TEL 0118 933 6911 TEL 0118 933 6922 0118 933 6933 FAX 0118 9310035 FAX 0118 986 9124 FAX 0118 933 6942 0118 933 6942 For ROI Republic of Ireland please contact one of the numbers below TEL 01 6266798 FAX 01 6266634 Thanks you for buying Baumatic Applies to UK Scotland Wales amp Northern Ireland only Republic of Ireland has 1 year labour amp 1 year parts warranty only 21 Baumatic You will be mine Headquarters Baumatic Ltd Baumatic Buildings 6 Bennet Road Reading Berkshire RG2 0QX United Kingdom Sales Telephone 44 118 933 6900 Sales Fax 44 118 931 0035 Service Telephone 44 118 933 6911 Service Fax 44 118 986 9124 Spares Telephone 44 118 933 6922 Technical Advice Telephone 44 118 933 6933 E mail sales baumatic co uk technical baumatic co uk Http Internet site www baumatic com 22 23 Baumatic www baumatic caom
10. e worktop that corresponds with the drawings shown above o IMPORTANT You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it o Carefully turn the hob upside down and place it on a cushioned mat o Apply the sealing strip provided around the edge of the appliance o The protective covering must be removed from both sides o Do not leave a gap in the sealing agent or overlap the thickness o IMPORTANT Do not use a silicon sealant to seal the appliance against the aperture This will make it difficult to remove the hob from the aperture in future particularly if it needs to be serviced 15 A SEALING STRIP C SCREW B CLAMP A Sealing strip B Clamp C Screw o Place the clamp B over the holes that match the size of the screws There are one set of screw holes in each corner of the hob Slightly tighten a screw C through the clamp B so that the clamp is attached to the hob but so that you can still adjust the position of it o Carefully turn the hob back over and then gently lower it into the aperture hole that you have cut out o On the underneath of the hob adjust the clamps into a position that is suitable for your worktop Then fully tighten the screws C to secure the hob into position Electrical connection This appliance must be installed by a gualified person in accordance with the latest edition of the I E E Regulations
11. f Baumatic Ltd interfere with the appliance the policy is negated and Baumatic Ltd will be under no further liability The guarantee covers the appliance for normal domestic use only unless otherwise stated Any claims made under the terms of the guarantee must be supported by the original invoice bill of sale issued at the time of purchase This guarantee is transferable only with the written consent of Baumatic Ltd If the appliance fails and is considered either not repairable or uneconomical to repair between 12 months 2 years if registered and five years a free of charge replacement will not be offered The guarantee for any replacement will only be for the remainder of the guarantee on the original product purchased The guarantee does not cover Sinks and taps Failure to comply with the manufacturers instructions for use The replacement of cosmetic components of accessories Accidental damage or wilful abuse Subsequent loss or damage owing to the failure of the appliance or electrical supply Incorrect installation Losses caused by Acts of God civil war failure to obtain spare parts strikes or lockouts Filters fuses light bulbs external hoses damage to bodywork paintwork plastic items covers baskets trays shelves burner bases burner caps decals corrosion rubber seals In the course of the work carried out it may be necessary to remove the appliance from it operating position Whilst all reasonabl
12. his appliance is marked according to the European directive 2002 96 EC on Waste electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol aka on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product o The packaging materials that Baumatic uses are environmentally friendly and can be recycled o Please discard all packaging material with due regard for the environment Important safety information Your safety is of the utmost importance to Baumatic Please make sure that you read this instruction booklet before attempting to install or use the appliance If you are unsure of any of the information contained in this booklet please contact the Baumatic Technical Department General Information o This
13. ir authorised service agent Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time During and after use all surfaces will become hot o Ifitis necessary for younger family members to be in the kitchen please ensure that they are kept under close supervision at all times o Older children should only be allowed to utilise the appliance when supervised General Safety The appliance should only be installed and connected by a suitable qualified person Care should be taken to ensure that the units and work surfaces that you build the appliance into meet with the relevant standards If you notice any scratches splits or cracks in the ceramic glass you should immediately switch off the appliance and disconnect it from your mains supply Otherwise there is the risk of electric shock occurring During use Any film or stickers that are present on the hob surface when it is delivered should be removed before use Care should be used when utilizing the appliance otherwise there is a risk of burns being caused o You should not allow the electrical connection cables to come into contact with the hob surface when it is hot or any hot cookware o If fat and oil overheats then it can ignite extremely quickly For this reason when cooking with fat and oil the appliance should not be left unatte
14. llation other than the one specified by Baumatic Ltd has been completed Please refer to the conditions of guarantee document on page 21 of this instruction manual for clarification of this 20 Baumatic Ltd Conditions of guarantee Dear Customer Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost giving an initial guarantee period of 24 months The extended guarantee period applies to England Scotland Wales and Northern Ireland only To qualify for your full 24 months guarantee you must register your appliance within 28 days of purchase to be covered under this guarantee This can be done online via www baumatic co uk or through returning the guarantee card which can be found in each new Baumatic appliance In addition your appliance is covered by a 5 year parts warranty Baumatic Ltd will provide free of charge the parts required to repair the appliance only if they are fitted by a Baumatic engineer for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date An additional to 3 year insurance scheme for labour is available should you wish to extend the warranty period Should any person other than an authorised representative o
15. n Care must be taken to avoid the cable being in contact with hot parts of the appliance Replacing the mains supply cable If the mains supply cable is damaged then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department The mains supply cable should be replaced in accordance with the following instructions O Switch the appliance off at the control switch Open the terminal block on the underside of the hob Unscrew the terminal screws fixing the cable Replace the cable with one of the same length and in accordance with the specification given above The green yellow earth wire must be connected to the terminal marked It must be about 10 mm longer than the live and neutral wires o The blue neutral wire must be connected to the terminal marked with letter N the live wire must be connected to the terminal marked with letter L My appliance isn t working correctly o The cooking zones are not functioning or will not switch on Check that the mains electrical supply to the appliance is correct and working Check the mains fuse o The residual heat indicator has not come on after I have switched a cooking zone off The cooking zone has only been turned on for a short period of time therefore it did not go above 50 C IMPORTANT If the cooking zone does appear to be hotter than 50 C and the residual heat indicator has not come on
16. nded Make sure that all of the cooking zones are switched off after use Cleaning o Cleaning of the hob should be carried out on a regular basis o IMPORTANT Before attempting to clean the appliance it should be disconnected from the mains and cool o Great care should be taken whilst using this appliance and when following the cleaning procedure o You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance Installation This appliance must be correctly installed by a suitably qualified person strictly in accordance with the manufacturer s instructions Please see the specific section of this booklet that refers to installation o Baumatic Ltd declines any responsibility for injury or damage to person or property as a result of improper use or installation of this appliance Declaration of conformity This appliance complies with the following European Directives 73 23 EEC dated 19 02 1973 Low Voltage Directive 89 336 EEC dated 03 05 1989 EMC Directive inclusive of Amending Directive 92 31 EEC 93 68 EEC dated 22 07 1993 CE Marking Directive 89 109 EEC dated 25 01 1992 Materials that can touch food o The manufacturer declares that the hob is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force This appliance must be used by a trained person for domestic purposes only To avoid damaging
17. ou turn the control knob clockwise to the 0 position the red ON OFF neon will switch off Residual heat indicator In the middle of the control knobs there is an orange residual heat indicator After turning a hob zone on when the temperature of any of the zones goes above 50 C the corresponding residual heat indicator neon will come on After turning the hob zones off the residual heat indicator neon will stay on until the temperature of the zone falls below 50 C IMPORTANT The residual heat indicator will disappear if your mains supply is cut Hob guidelines O The first few times the hob top is used it may give off an acrid burning smell This smell will disappear completely with repeated use The hob surface is fitted with cooking areas of different diametre and power The positions where the heat will radiate from are clearly marked on the hob top The saucepans must be positioned exactly on these zones for efficient heating to occur Pans should have the same diametre as the cooking zone that they are being used on You should not use saucepans with rough bottoms as this can scratch the ceramic surface Before use make sure that the bottoms of the saucepans are clean and dry When cold the bottom of the pans should be slightly concave as they expand when hot and lie flat on the surface of the hob This will allow the heat to transfer more easily The best thickness for the bottom of the pans is 2 3
18. your appliance o The ceramic glass can be damaged by objects falling onto it o The ceramic glass edge can be damaged by knocks from cookware o Cast iron and cast aluminium cookware with damaged bases may scratch the ceramic surface if they are dragged across it 7 o Pans should be lifted on and off the hob surface and not dragged o Cooking zones should not be switched on without cookware placed on it Also the cookware should not be empty Specifications Product dimensions Aperture dimensions Height 288 mm Height 268 mm Width 510 mm Width 490 mm Depth 50 mm Product specifications 1 x 1 80 kW hyperspeed zones diametre 180 mm 1 x 1 20 kW hyperspeed zones diametre 140 mm Front control operation 1 Individual residual heat indicator O O O 0 Standard accessories o Ceramic hob scraper Optional extra o PJS Joining strip for Pythagora domino hobs Electrical details Rated Voltage 230 Vac 50 Hz Supply Connection 13 A double pole switched fused outlet with 3mm contact gap Max Rated Inputs 3 00 kW Mains Supply Lead 3 core x 2 5 mm not supplied For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice The rating plate of your hob is located on the underneath of the appliance Therefore it is a good idea to record this information before you install your appliance Model Num
Download Pdf Manuals
Related Search