KRAM 84560X060M car kit
Contents
1. Drive amp Talk range e Carkits with 4 speaker mute or when Kram mute box is used The carkit is defective please replace the carkit Radio will not turn on or not working properly after installation 1 Please check for a blown fuse at the radio or in the car fuse box 2 Remove the Audio2Car harness and connect the radio to the original car connector If the radio is now working replace the Audio2car harness See our complete Radio Mute program on our website www kram dk2. Audio ZCar Audio ZCar The professional mute The professional mute Audio2Car harness Product Description The Audio2Car range allows OEM car speakers to be used for aftermarket Audio equipment Audio2Car allow the car speakers to be used for audio playback from aftermarket Audio equipment For a com plete installation two or more item numbers are required See description at the last page For a complete installation normally a minimum of two item numbers are re quired Audio equipment with build in mute function If the Audio equipment is equipped with a build in mute function two item numbers are required The 1st item number is the Audio2Car harness The 2nd item is a Audio2Car carkit adaptor Audio equipment without build in mute function If the Audio equipment is not equipped with speaker relays a Mute box from Kram Drive amp Talk range can be added together with a Drive amp Talk carkit adaptor Speaker function This is achieved by connecting Audio equipment with build in speaker relay function or by using a Mute box from the Kram range This way the radio sound is muted and the sound from the aftermarket Audio equipment is sent through the car speakers You will achieve a perfect sound without interference from the car radio Mute wire function The mute wire is connected from the 24 pin connector to the most used mute position for the car model This enables the use of the radios built in mute function If the radio does n
3. low Ing 1 If there is supply on the red constant 12v wire but not on the blue ignition wire the car may require an alternative ignition source See installation step 4 2 Check that the bullets on the supply wires are properly connected The supply wires are the red blue and black wires 3 Check for a blown fuse on the Audio2Car harness or in the cars fuse box The carkit does not turn off when the key is removed from the ignition barrel Your carkits needs a real ignition source Please check the following 1 Is there an ignition supply on the blue wire There should be no voltage on the blue wire when there is no key in the ignition See installation step 4 Not all speakers are muted Try to disconnect the Carkit adaptor or mute box from the Audio2Car harness then turn on the radio and check the following 1 All speakers keep playing This is the wrong Audio2Car harness for this car sound system 2 Only a few speakers keep playing Please check that the bullet connector on the yellow mute wire are properly connected 3 All speakers are now muted e Carkits with 1 speaker mute Some carkits can only mute 1 speaker channel with their build in mute box This is normally stated on the label on the carkit adaptor for these carkits else please check the carkit manual If a full mute is desired with these carkits then this can be achieved by either connecting the mute wire see installation step 5 Or adding a mute box from our
4. nstallation description for 84560X060 Audio2Car harness used for Man 5 E Fly wires Trucks Including AUX connection for Music Bullet Connectors Pa A Audio2Car Harness Item number 84xxx Needed items A Audio2Car harness B Audio2Car carkit adaptor or Mute box from our Drive amp Talk range see last page C Carkit 24 pin Connectors gt Note The Carkit C and Audio2Car carkit adaptor B bought sepa rately B Audio2Car Extension _ cable Item number AEX gt Installation 1st Remove the key from the ignition barrel This is done to 24 pin Connectors gt avoid error messages on the cars electrical system C Audio2Car Adaptor Item number AAxxx 2nd Locate the red electronics module The module is located behind the kick panel in front of the door in the passenger side of the truck This is where the 12v supply will be taken from gt 3rd Connect the cable set to the back of the radio Remove the radio Screws are located behind the two round knobs on the radio front Insert the cable set between the radio and the con nector in the wiring loom Draw the 3 lose wires to the location of the red electronics module 4th Connect the lose wires to the red electronics module The fly wires are inserted into the gray 18 pin connector on the module The RED constant 12v wire should be inserted into pin nr 2 The BLUE ignition wire should be inserted into pin nr 3 The BLACK ground wire
5. ot have such function or the mute exists in a different connector than the ones used on the Audio2Car harness the mute wire can be found in a yellow fly wire fitted with a bullet connector Audio2Car Carkit Adaptors Power supply All Audio2Car cables have an integrated power supply for the Audio equipment in the 24 pin vs connector The constant 12v and the ground supply are normally sourced from the radio supply This way power supply of most Audio Equipment can be achieved without cutting the cars wiring loom The constant 12V wires Several different carkit adaptors j are red and the ground wires are black are available for Carkits that have a build in mute function for 1 or 4 Speakers Please see the complete range of Audio2Car carkit adaptors at our website www kram dk Ignition supply If an ignition source is available in the radio connector then it will normally also be available in the 24 pin connector If an ignition source is not available a constant 12V source is connected to the Ignition pin via bullet connectors If a real ignition is required for the chosen Audio Equipment an IGNIBOX item no I can be connected to create an artificial ignition Or an ignition source found elsewhere can be connected to the bullet with the blue wire The 12V ignition wires in the Audio2Car cable are blue Aux integration The 4 pin connector on the Audio2Car harness allow a Kram Aux solution to be connected This will allow the Exam
6. ples of ee use of the car sound system amplifier for Music playback and thereby achieving higher sound quality carkit adaptors Technical Specifications Description L shaped with bullet connections for Ground Constant 12v and Ignition Drive amp talk Mute box Normal Wire dimensions AWG 18 for power wires AWG 20 for all other wires range Standard Fuse sizes 2 Amp for constant supply 1 Amp for Ignition supply Maximum Fuse size 7 5 Amp for constant supply 7 5 Amp for Ignition supply Maximum output pr speaker 100 Watt RMS 200 Watt music power 4 Ohm Size 400 x 400 mm i vee Configuration chart for 24 pin connector Several different types of mute boxes are on ae ee ea res ea oe a a lt i ue Const IGN OutL OutR RR RF LF LR LR LF RF RR is a os aad ae a la a Pi turn your Audio2Car cable into a Kram saa z i j i 2 u t t t d a 7 hin a 7 A ee i oe ey 2 lt Drive amp Talk solution Therefore you will Mute Line Line Radio Radio Radio Radio Spk Spk Spk Spk ee also need a Drive amp Talk carkit adaptor Out L Out R RR RF LF PLR LR LF RF RR Adding this adaptor turns your Audio2Car cable does P Please see the Complete Drive amp Talk your Audio2Car cable into a not include an ignition source range at our website Connector seen from cable entry side Kram ISO2CAR solution This adaptor is plug and play vwa kimik with your Audio2Car cable EN140 V01 Audio ZCar The professional mute I
7. should be inserted into pin nr 11 on the picture on next page 5th Check fuse size The fuse on the Audio2Car cable should not g be bigger than the ones used on the wiring loom supplied with the carkit The fuses on the Audio2Car cable should be replaced with a size similar to the ones supplied with the carkit Note Never exceed the Maximum Fuse size for the Audio2Car cable See first page 6th Connect the carkit adaptor or Drive amp Talk Mute box Connect the carkit adaptor to the 24 pin connector on the Audio2Car harness Connect the carkit adaptor to the carkit 7th Use of included AUX connection Optional For improved Music quality please choose the carkit AUX Line out as output for Music This sometimes has to be selected in the carkit menu Then select the AUX input on the radio Carkit Music will then be played via the radio and radio amplifier It is also possible to use the AUX input for other accessories by connecting a Aux adaptor to the 4 pin connector F on the Audio2Car cable See our AUX adaptor program at www kram dk Note AUX input may not be available on all Radios Audio ZCar The professional mute Picture of 18 pin connector with power wires connected Troubleshooting Guide Carkit does not start up Check if there is 12V between the black and the red wire and also between the black and blue wire in the 24 pin connector when the car is started If there is not 12v on both wires please check the fol
Download Pdf Manuals
Related Search