Home

Philips Brilliance LCD monitor with Pivot base, USB, Audio 220P2EB

1. Q Q Kensington anti thief lock AC power input DVI D input available for selecting model VGA input USB upstream and downstream Audio input Zero power Switch Connect to PC Connect the power cord to the back of the montior firmly Turn off your computer and unplug its power cable Connect the monitor signal cable to the video connector on the back of your computer Connect the PC audio cable to the audioconnector on the back of your computer Plug the power cord of your computer and your monitor into a nearby outlet Connect the USB upstream port on the monitor and the USB port on your computer with a USB cable The USB downstream port is now ready for any USB device to plug in Turn on your computer and monitor If the monitor displays an image installation is complete 2 2 Operating the monitor El Front view product description E OK lo access OSD menu Retum to previous OSD level A7 Dim down to 70 of brightness level 8 by one touch OD To switch monitors power on and off P AY 10 adjust the OSD menu I Toadjust volume of the display ej Smartlmage There are 6 modes to be 8 selected Office Photo Movie Game Economy and Off MQ Earphone jack n phone j Description of the On Screen Display What is On Screen Display OSD On Screen Display OSD is a feature in all Philips LCD monitors It allows an end user to adjust screen
2. Red Blue Purple Red Green Yellow Pixels and Sub pixels Green Blue Cyan Light Blue A pixel or picture element is composed of three sub pixels in the primary colors of red green and blue Many pixels together form an image When all sub pixels of a pixel are lit the three colored sub pixels together appear as a single white pixel When all are dark the three colored sub pixels together appear as a single black pixel Other combinations of lit and dark sub pixels appear as single pixels of other colors Three adjacent lit sub pixels one white pixel 20 amp Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots u Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or off That is a dark dot is a sub pixel that stands out on the screen when the monitor displays a light Proximity of Pixel Defects pattern These are the types of black dot defects Because pixel and sub pixels defects of the same ype that are near to one another may be more noticeable Philips also specifies tolerances for the I proximity of pixel defects Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defe
3. Cokr Contrast re Focus Postion Ka Resolution Options Help D SmartControl SmartControl Premium al Postion Resolution a LA Help PHILIPS Brightness Improperly adjusted Brightness will result in z loss of detail in darker image areas Adjust the Brightness for the best possible picture quaity 1 Lower the Brightness to the minimum level 2 Raise the Brightness to the desired level 3 Adjust the Brightness as needed to achieve an equal separation of the stripes Brightness undo Reset PHILIPS Contrast Adjust the Contrast use the sider to keep detai in lighter image areas 1 Raise the Contrast until the numbers 1 and 2 are no longer visible 2 Slowy lower the Contrast to make the numbers 2 and 3 reappear The number 1 should remain barely visible Contrast ce G Undo Reset 13 W SmartControl SmartControl Premium Brightness Color g gt contrast Eco C Poston EA Resolution Optons Hep 1B SmartControl SmartControl Premium p Brightness we Contrast Focus Resolution Help D SmartControl SmartControl Premium P e Brightness a Contrast Focus Postion R 4 Dx PHILIPS Focus Your display s timing needs to be synchronized with the video signal 1 Choose Auto Setup 2 Ifthe vertical bands are stil visble you ll need to adjust the Pitch Pitch Try to make the vartcal bands disapp
4. P U nplug the monitor if you need ith a slightly damp cloth The sc acing your hand or fingers on the LCD panel nplug the monitor if you are not going to use it for an extensive period of time to clean it reen may be wiped with a dry cloth when the power is off owever never use organic solvent such as alcohol or ammonia based liquid s to clean your monitor To avoid the risk of shock or permanent damage to the set do not expose the monitor to dust rain wa environment as soon as possi monitor please and disconnect the foreign subs cold the maintenance center Do not store or use the monitor in locations exposed to heat direct sunlight or extreme er or excessive moisture f your monitor gets wet wipe it with dry cloth ble f foreign substance or water gets in your turn the power off immediately the power cord Then remove tance or water and send it to n order to maintain the best performance of your monitor and use it for a onger lifetime please use the monitor in a location that falls within the following temperature and humidity ranges o Temperature 0 40 C 32 95 F o Humidity 20 80 RH e IMPORTANT Always activate a moving screen saver program when you leave your monitor unattended Always activate a periodic screen refresh application if your monitor will display unchanging static content Uninterrupted display of still or sta
5. Off 7 Over Scan On Off H Position 0 100 H V Position 0 100 Phase 0 100 Clock 0 100 Resolution Notification On Off Reset Yes No Information EJ Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution 1680x1050 60Hz When the monitor is powered on at a different resolution an alert is displayed on screen Use 1680x1050 60Hz for best results Display of the native resolution alert can be switched off from Setup in the OSD On Screen Display menu EX Physical Function Pivot Tilt Swivel 3 While keeping the release button pressed tilt 2 3 Remove the Base the base and slide it out Condition e ForVESA standard mounting applications Before you start disassembling the monitor base please follow the instructions below to avoid damage or injury 1 Extend the monitor base to its maximum height amp Note This monitor accepts a 100mm x 100mm VESA Compliant mounting interface U f PHILIPS 100mm 2 Place the monitor face down on a smooth surface taking care to avoid scratching or damaging the screen Then lift the monitor stand D 3 Product information 3 1 Smartlmage ED What is it Smartlmage provides presets that optimize display for different types of content dynamically adjusti
6. icm files or a driver disk when you first install your monitor Follow the instructions to insert the companion CD ROM included in this package Monitor drivers inf and icm files will be installed automatically How do I adjust the resolution Your video card graphic driver and monitor together determine the available resolutions You can select the desired resolution under Windows Control Panel with the Display properties What if get lost when I am making monitor adjustments via OSD Simply press the OK button then select Reset to recall all of the original factory settings Is the LCD screen resistant to scratches In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects When handling the monitor make sure that there is no pressure or force applied to the panel surface side This may affect your warranty conditions Q7 How should I clean the LCD surface Ans For normal cleaning use a clean soft cloth For extensive cleaning please use isopropyl alcohol Do not use other solvents such as ethyl alcohol ethanol acetone hexane etc Q8 Can I change the color setting of my monitor Ans Yes you can change your color setting through OSD control as the following procedures e Press OK to show the OSD On Screen Display menu e Press Down Arrow to select the option Color then press OK to
7. odstranil Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit a three prong socket All equipment that works together computer monitor printer and so on should have the same power supply source The phasing conductor of the room s electrical installation should have a reserve short circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes A To comp power supply cab power supply soc near the equipme etely switch off the equipment the e must be removed from the et which should be located nt and easily accessible A protection mark B confirms that the equipment is in compliance with the protection usage requirements of standards PN 93 1 42107 and PN 89 E 06251 Wymagania Polskiego Centrum Bada i Certyfikacji Urz dzenie powinno by zasi ane z gniazda z przy czonym obwodem ochronnym gniazdo ko kiem Wsp pracuj ce ze sob urz dzenia kampuse monitor drukarka powinny by zasilane Instalacja elektryczna pomieszczenia powinna zawiera w przewodzie fezowym tezeenow ochrang 4 are ka o warto ci znamionowej nie wi kszej ni 16A amper w e po Zauk bezpiecze stwa B potwierdza zgodno or wymaganiami bezpiecze stwa u ytko pels znanymi w Pi 43 T42107 TPN KOE 1 Pozosta e instrukcje bezpiecze stwa Nie nale y u ywa wtyczek adapterowy
8. which can be determined FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo United States Only FC This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 28 Commission Federale de la Communication FCC Declaration Cet quipement a t test et d clar conforme auxlimites des appareils num riques de class Baux termes de l article 15 Des r gles de la FCC Ces limites sont con ues de fa on fourir une protection raisonnable contre les interf rences nuisibles dans le cadre d une installation r sidentielle CET appareil produit utilise et peut mettre des hyperfr quences qui si l appareil n est pas install et utilis selon les consignes donn es peuvent causer des interf rences nuisibles aux communications radio Cependant rien ne peut garantir l absence d interf rences dans le cadre d une installation particuli re Si cet appareil est la cause d interf rences nuisibles pour la r ception des signaux de radio ou de t l vision ce qui peut tre d cel en fermant l quipement puis en e remettant en fonction l utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes e R orienter ou d placer l antenne
9. DETTE DU PASSE lasjon UTSTYRET PLASSERES M PA AT KONTAKTENE FOR ST MTILF RSEL ER LETTE A NA BSMI Notice Taiwan Only F LH MEMRCZIRE Ergonomie Hinweis nur Deutschland Der von uns gelieferte Farbmonitor entspricht den in der Verordnung Uber den Schutz vor Schdden durch R ntgenstrahlen festgelegten Vorschriften Auf der R ckwand des Ger tes befindet sich ein Aufkleber der auf die Unbedenklichkeit der Inbetriebnahme hinweist da die Vorschriften ber die Bauart von St rstrahlern nach Anlage Ill 2 5 Abs 4 der R ntgenverordnung erf llt sind Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht ist darauf zu achten da 1 Reparaturen nur durch Fachpersonal durchgef hrt werden 2 nur original Ersatzteile verwendet werden 3 bei Ersatz der Bildr hre nur eine bauartgleiche eingebaut wird Aus ergonomischen Gr nden wird empfohlen die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden schlechte Lesbarkeit und erh hte Augenbelastung bei zu geringem Zeichenkontrast w ren die Folge Der arbeitsplatzbezogene Schalldruckpegel nach 35 betr gt OdB A oder weniger TUNG BEIM AUFSTELLEN DIESES GER TES DARAUF ACHTEN DAB NETZSTECKER UND NETZKABELANSCHLUB LEICHT ZUG NGLICH SIND China RoHS The People s Republic of China released a regulation called Management Methods for Controlling Pollution by Electronic Information Products or
10. E mail cic_korea philips com Service hours Mon Fri 9 00AM 6 00PM Sat 9 00AM 1 00PM Malaysia Company After Market Solutions CE Sdn Bhd Address Lot 6 Jalan 225 51A 46100 Petaling Jaya Selangor DE Malaysia Phone 603 7953 3370 Philips Info Line 1 800 880 180 Fax 603 7953 3338 E mail pceinfo my philips com Service Hours Mon Fri 8 15am 5 1 5pm Sat 9 00am 1 00pm Pakistan Philips Consumer Service Address Mubarak manzil 39 Garden Road Saddar Karachi 74400 Tel 9221 2737411 16 Fax 9221 2721167 E mail care philips com Website www philips com p Singapore Company Philips Electronics Singapore Pte Ltd Philips Consumer Care Center Address 620A Lorong 1 Toa Payoh 1 P4 Building Level 1 Singapore 319762 Tel 65 6882 3999 Fax 65 62508037 E mail consumencare sg philips com Service hours Mon Fri 9 00am 6 00pm Sat 9 00am 1 00pm Taiwan Company FETEC CO Address 3F No 6 Lane 205 Sec 1 Chang Hsing Rd Lu Chu Hs Taoyuan Taiwan R O C 33800 Consumer Care 0800 231 099 Tel 03 2120336 Fax 03 3129184 E mail knlinO8 xuite net Service hours Mon Fri 8 30am 7 00pm Thailand Company Axis Computer System Co Ltd Address 1421 Soi Lardprao 94 Srivara Town In Town Soi 3 Road Wangthonglang Bangkok 10310 Thailand Tel 662 934 5498 Fax 662 934 5499 E mail axis5QQaxiscomputerco th Service Hours Mon Fri 08 30am 05 30pm Glee Electronics In
11. commonly referred to as China RoHS All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request PERkBiROHS REPARAR BFR RS RSH INE HAHEXREROHS DROIT AFRO SNA SAR MARTRNSRM SS AREAL A ETRE RRRCRT BBREWARICK BEER BEFEHNMATK R LJ AULA SRE SRZEM Pb Ha Cd Cr6 PBB PBDE LEJ O O O 0 O O CRTERA x e o O O O BAMRA IE _ x x O o O e CET x O O o e e RER x O O O REREH x o o o O RUNA LE ED AE ONE EEE ane FORE ERER ERES O RTRA BA E MAEAEA ASARDA A HS AFER APH EHS ORR MERE RERO T X RZA BRRR LD ZE RAM ME A EN AL RFEBFREWSA RARE WENREER EMERYT X HBE RABHROHSZIER MF REA 45 HBE IHR RENT TEA MH A ABHENMRITIEE HE AREA FETT BREWER HER i 11 e J FER RANGE i X Beak wy FLA MER BEII PERERA SIR RBABA ERAREMA ZRRAFAUTER HARAXE SSSR BRERA http www energylabel gov cn 6 Customer care and warranty Customer Care amp Warranty PLEASE SELECTYOUR COUNTRY AREA TO REVIEW DETAILS OFYOUR WARRANTY COVERAGE WESTERN EUROPE Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Ne
12. day you buy your monitor For 3 years thereafter your monitor will be serviced in case of defects provided for under the warranty coverage What is excluded The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Phi lips guarantee may not apply if the documents have been altered or made illegible the model or production number on the product has been altered deleted removed or made illegible repairs or product modifications and Iterations have been executed by unauthorized service organizations or persons damage is caused by accidents including but not limited to lightning water or fire misuse or neglect in any way 35 Reception problems caused by signal conditions or cable or antenna systems outside the unit Defects caused by abuse or misuse of monitor Product requires modification or adaptation to enable it to comply with local or national technical standards which apply in countries for which the product was not originally designed manufactured approved and or authorized Therefore always check whether a product can be used in a specific country the Please note that the product is not defective under this guarantee in the case where m
13. notes cautions or warnings They are used as follows amp Note This icon indicates important information and tips that help you make better use of your computer system Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data A Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem Some warnings may appear in alternate formats and may not be accompanied by an icon In such cases the specific presentation of the warning is mandated by the relevant regulatory authority 1 3 Disposal of product and packing material Waste Electrical and Electronic Equipment WEEE This marking on the product or on its packaging illustrates that under European Directive 2002 96 EC governing used electrical and electronic appliances this product may not be disposed of with normal household waste You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection To determine the locations for dropping off such waste electrical and electronic contact your local government office he waste disposal organization that serves your household or the store at which you purchased he product Your new monitor contains materials that can be recycled and reused Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amoun
14. of smoke or sparks Do not perform any troubleshooting steps Disconnect the monitor from mains power source immediately for safety e Contact with Philips customer service representative immediately El Imaging Problems Image is not centered e Adjust the image position using the Auto function in OSD Main Controls e Adjust the image position using the Phase Clock of Setup in OSD Main Controls It is valid only inVGA mode Image vibrates on the screen Check that the signal cable is properly securely connected to the graphics board or PC Vertical flicker appears e Adjust the image using the Auto function in OSD Main Controls e Eliminate the vertical bars using the Phase Clock of Setup in OSD Main Controls It is valid only inVGA mode 44 Horizontal flicker appears e Adjust the image using the Auto function in OSD Main Controls e Eliminate the vertical bars using the Phase Clock of Setup in OSD Main Controls It is valid only in VGA mode Image appears blurred indistinct or too dark e Adjust the contrast and brightness on On Screen Display An after image burn in or ghost image remains after the power has been turned off e Uninterrupted display of still or static images over an extended period may cause burn in also known as after imaging or ghost imaging on your screen Burn in after imaging or ghost imaging is a well known phenomenon
15. of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device lo prevent damage which may result in fire or shock hazard do not expose this appliance to rain or excessive moisture THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS television reception
16. purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Philips at 800 479 6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one ofits authorized service centers In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Philips is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of he possibility of such damages REMEMBER Please record the model and serial numbers found on the product below ODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province Before contacting Philips please prepare the following details so we can solve your problem quickly Philips ty Philips se Purchase required pe number rial number date copy of purchase may be PC environment Processor o CUP and Graphic card name and driver version o Operating system o Application being used Other cards installed Having the following information avail
17. 217 33 86 w BELARUS Service BY Petrus Brovky st 19 101 B 220072 Minsk Belarus BULGARIA LAN Service 140 Mimi Balkanska Str Office center Translog 1540 Sofia Bulgaria Tel 359 2 960 2360 www lan service bg CZECH REPUBLIC General Consumer Information Center 800 142100 Xpectrum Lu na 591 4 CZ 160 00 Praha 6 Tel 800 100 697 or 220 121 435 Email info xpectrum cz www xpectrum cZ CROATIA Renoprom d o o Ljubljanska 4 Sv Nedjelja 10431 Croatia Tel 385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE 12618 Tallinn Tel 372 6519900 www ee invia fujitsu com HUNGARY Serware Szerviz Vizimolnar u 2 4 HU 1031 Budapest Tel 36 1 2426331 Email inbox serware hu www serware hu HUNGARY Profi Service Center Ltd 123 Kulso Vaci Street 1044 Budapest Europe Center ungary Tel 36 1 814 8080 m andras psc hu LATVIA ServiceNet LV Jelgavas iela 36 LV 1055 Riga Tel 371 7460399 Email servissQservicenet lv LITHUANIA ServiceNet LT Gaiziunu G 3 LT 3009 KAUNAS Tel 370 7400088 Email servisas servicenet lt www servicenet lt ROMANIA Blue Ridge Int l Computers SRL 115 Mihai Eminescu St Sector 2 RO 020074 Bucharest Tel 40 21 2101969 SERBIA amp MONTENEGRO Kim Tec d o o Viline vode bb Slobodna zona Beograd L12 3 11000 Belgrade Serbia Tel 381 11 20 70 684 SLOVAKIA General Consume
18. 220P2 www philips com welcome EN User manual 1 Customer care and warranty 32 Troubleshooting amp FAQs 44 PHILIPS Table of Contents 1 1 1 2 1 3 2 1 2 2 2 3 3 1 32 3 3 34 3 5 3 6 74 72 73 Important Safety precautions and maintenance 1 Notational Descriptions 2 Disposal of product and packing material 3 Setting up the monitor Installation Operating the monitor REMOVE th Bases sun Product information SmartImage SmartContrast SmartSaturate SmartSharpness ee een Philips SmartControl Premium 12 Philips Flat Panel Monitors Pixel Derece POl Aa ne 20 Technical Specifications Resolution amp Preset Modes Automatic PowerSavin geese Regulatory Information 26 Customer care and warranty 32 Troubleshooting amp FAQs TROUDIESHOGU NG ao a a AAAA SmartControl Premium FAQs General FAQS nn 1 Important who uses the Phi It contains impor regarding operati The Philips guara This electronic user s guide is ips monitor lake time to read this user manual before you use your monitor ant information and notes ng your monitor ntee applies provided the product is handled properly for its intended use intended for anyone in accordance with its operati upon presentation of the origi receipt indicating the date of name and model and production number of the product purchase deal
19. able will also help speed up the process Your proof of purchase indicating date of purchase dealer name model and product serial number The shou full address to which the swap model d be delivered Just a phone call away Philips customer help desks are located worldwide Within the U S you can contact Philips customer care Monday Friday from 8 00 AM 9 00 PM Eastern Time ET and on Saturdays from 10 00 AM 5 00 PM ET hrs by using one of the contact phone numbers For more information on this and more great Philips products visit our website at Website http www philips com 42 Your International Guarantee Dear Customer Thank you for purchasing this Philips product which has been designed and manufactured to highest quality standards the f unfortunately something should go wrong with his product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Phi in the country of purchase and does not affect your statutory rights as a customer ips The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating
20. abled until the second color screen Next goes to the succeeding target 6 targets Final next goes File gt Presets pane Cancel closes the UI and returns to the plug in page Smartlmage Allows user to change setting for better display setting based on content When Entertainment is set SmartContrast and SmartResponse are enabled IB smartcontrol SmartControl Premium Wwe PHILIPS SmartImage Smartimage provides dfferent brightness and contrast levels to accomodate today s wice range of computer applications Choose the setting that s most comfortable or efficient when viewing your sppliation Alterratively simply choose the one that best describes Is type w TE so e Pak 15 ECO E Smartcontrol SmartControl Premium Adjust Color D Options Help Bx PHILIPS Schedule Power Savings When powered on the display is using power even if the screen is black Adjust the settings on th pane to mnimie the power usage during inactivity CF Timers ladle Timer Use the Idle sider to set tha stendby mode timer After the screen goes dark any mouse lor keyboard activity restores the desktop Power Off Timer After the display enters standby Inade the Power Off Timer begins to count down Use the Power Off slider to adjust the length of time before the display 6 automaticaly tumed off Note Once the display off the power button must be presse
21. ase contact the Philips Consumer Information Centers or via Website http www philips com 7 Troubleshooting amp FAQs 7 1 Troubleshooting This page deals with problems that can be corrected by a user If the problem still persists after you have tried these solutions contact Philips customer service representative Eli Common Problems No Picture Power LED not lit Make sure the power cord is plugged into the power outlet and into the back of the monitor e First ensure that the power button on the front of the monitor is in the OFF position then press it to the ON position No Picture Power LED is white blinking e Make sure the computer is turned on e Make sure the signal cable is properly connected to your computer make sure the monitor cable has no bent pins on the connect side If yes repair or replace the cable e The Energy Saving feature may be activated Screen says ATTENTION CHECK CABLE CONNECTION e Make sure the monitor cable is properly connected to your computer Also refer to the Quick Set Up Guide Check to see if the monitor cable has bent pins e Make sure the computer is turned on AUTO button doesn t function e The auto function is applicable only in VGA Analog mode If the result is not satisfactory you can do manual adjustments via the OSD menu amp Note The Auto Function is not applicable in DVI Digital mode as it is not necessary Visible signs
22. c Contact nos 632 636 3636 7064028 to 29 Fax no 632 7064026 Receiving Centers EO CARE Megamall th Level Cyberzone Building B Megamall Mandaluyong City n A NEO CARE SM North EDSA 4th Level Cyberzone Annex Bldg SM City North EDSA Quezon City 441 1610 MDR Microware Sales Inc Cebu Branch N Escario corner Clavano St Cebu City Phils 255 4415 255 3242 253 9361 4124864 to 67 Sun 0922 8210045 to 46 Davao Office C Arellano St Davao City 8000 082 225 3021 225 3022 Sun 0922 8210015 CDO Office 1445 Corrales Ext CDO City 088 856 8540 856 8541 Sun 0922 8210080 lloilo Office C Lim Comp Gomez St lloilo City H 033 338 4159 033 508 3 41 Sun 0922 8808850 Africa SOUTH AFRICA Company name Sylvara Technologies Pty Ltd Address Ho Address Palm Springs Centre Christoffel Road Van Riebeeck Park Kempton Park South Africa Tel 27878084456 Fax 2711 391 1060 E mail customercareQphilipssupport co za Service hours Mon Fri 08 00am 05 00pm Middle East Middle East North Africa Company AL SHAHD COMPUTER L L C Address PO BOX 29024 DUBAI UNITED ARAB EMIRATES TEL 00971 4 2276525 FAX 00971 4 2276242 E mail shahd52 eim ae Service hours Sat Thur 9 00am 1 00pm 8 4 00pm 8 00pm 37 Israel Company Eastronics LTD Address 13 Rozanis St PO B 39300 Tel Aviv 61392 Israel Tel 1 800 567000 call free in Israel 972 50 8353722 after service ho
23. cating date of purchase dealer name model and product serial number e The full address to which the faulty monitor has to be collected and the swap model should be delivered Philips customer help desks are located worldwide Click here to access the First Choice Contact Information Or you can reach us via Website http www philips com support First Choice Contact Information Telephone number ariff 3___ 0810 000206 78 250851 45 3525 8761 Luxembourg 26 84 30 00 Local call tariff ca 08 The Netherlands 31 0900 0400 063 ca 10 7 2270 8250 0223491505 2 1359 1440 34 __ 902 888 785 call tariff call tariff all tarifi z z 6 __ 08 632 0016 Switzerland 2 2310 2116 United Kingdom 207 949 0069 34 Your Guarantee in Central and Eastern Europe Dear Customer Thank you for purchasing this Philips product which has been designed and manufactured to he highest quality standards If unfortunately something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase What is covered This Philips Guarantee in Central and Eastern Europe applies within Czech Republic Hungary Slovakia Slovenia Russia and Turkey and only for monitors originally designed manufactured approved and or authorized for usage within these countries Warranty coverage begins as from the
24. ch lub usuwa ko ka obwodu ochronnego z wtyczki Je eli konieczne jest u ycie pezed u acza to nale y u y przed u acza 3 2ylowego z prawid owa po czonym przewodem ochronnym System ko kami napi bezzakl ce Nale y upewni byty umieszcza lerowy nale y zabezpieczy przed nag ymi chwilowymi wzrostami lub spad ywaj c eliminatora przepi urz dzenia dopasowuj cego lub r d a zasilania tach systemu komputerowego oraz aby kable nie yloby na nie nadeptywa lub potykad si o nie rozlewa napoj w ani innych ply wpycha adnych przedmiot w do atwor w systern kompi ta spowodowa po ar lub pora enie pr dem poprzez zwarcie elements system komputerowy n komputerowy powinien znajdowa si z dala od grzejnik w i r di le y blakawa atwor w w nych Nale y unika k adzenia lu komputer oraz umieszczania komputera w ciasnym miejscu bez mo liwosci cyrkulacji powi etrza wok niego 30 North Europe Nordic Countries Information Placering Ventilation VARNING FORSAKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG AR LATATKOMLIGA NAR DU STALLER DIN UTRUSTNING PAPLATS Placering Ventilation ADVARSEL S RG VED PLACERINGEN FOR AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGAENGELIGE Paikka llmankierto VAROITUS SIJOITA LAITE SITEN ETT VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA Plassering Venti ADVARSEL N R
25. ct with stand WxHxD 505 x 495 x 250mm Product without stand 505 x 351 x 59mm WxHxD Box dimension WxHxD 565 x 468 x 263mm Product with stand Product without stand Product with packaging Temperature range Storage 20 C to 60 C operation 0 C to 40 C Relative humidity 20 to 80 Altitude Non operation 12 000 ft 3 658 m operation 40 000 ft 12 192 m MTBF 50 000 hrs 23 ROHS EPEAT Gold www epeat net Packaging 100 recyclable Regulatory Approvals CE Mark Energy Star 5 0 FCC Class B SEMKO TCO5 0 TUW GS TUV Ergo UL cUL Black Sliver Black Black e Note This data is subject to change without notice Go to www philips com support to download the latest version of leaflet 24 4 1 Resolution Preset Modes Ef Maximum Resolution For 220P2 1680 x 1050 at 60 1680 x 1050 at 60 z analog input z digital input El Recommended Resolution For 220P2 1680 x 1050 at 60 Hz digital input 37 879 800x600 60 317 100 180 180 t80 4 2 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC the monitor can automatically reduce its power consumption when not in use If an input from a keyboard mouse or other input device is detected the monitor will wake up automatically The following table shows the power consumption and signaling of this automatic power saving feature VESA Video H sync Vsync P
26. cts exceeding the tolerances listed in the following tables BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 3 adjacent it subphels one witepe go BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 220P2 2 adjacent dark subpixels 3 adjacent dark subpixels GE zB 1 dark subpixel TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 220P2 Total bright or black dot defects of all types 6 Note 1 or 2 adjacent sub pixel defects 1 dot defect This monitor is ISO9241 307 compliant 21 4 Technical Specifications Picture Display orizontal Frequency 30kHz 80kHz sRGB YES Simplified Chinese Portuguese 5120 51465 emo 22 On mode Energy Consumption EnergyStar 5 0 test method 24W typ 43W max with audio and USB x 4 SEEM AC Input Voltage at 100VAC 5VAC 50Hz 3Hz AC Input Voltage at 115VAC 5VAC 60Hz 3Hz AC Input Voltage at 230VAC 5VAC 50Hz 3Hz Normal Operation typical 22 68W 2247W 22 12W Sleep typical 0 08W 0 08W 0 08W Heat Dissipation AC Input Voltage at 100VAC 5VAC 50Hz 3Hz AC Input Voltage at 115VAC 5VAC 60Hz 3Hz AC Input Voltage at 230VAC 5VAC 50Hz 3Hz 75 49BTU 0 341BTU 0 273BTU 7741BTU 76 69BTU Sleep typical 0 341BTU 0 341BTU 0 273BTU 0 273BTU D D ower LED indicator On mode White Standby Sleep mode White blinking ower Supply Build in 100 240VAC 50 60Hz Produ
27. d to turn the display back on F Schedule Daly Power Off Select tha time and day for the depay to Power OF lautomaticziy 17 00 T Monday I Tuesday I Wednesday T Thursday I Friday T saturday I Sunday nie never Jo w Powar Off 0 minuta GO w Standby Now Turn Power Off Now Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop down Plug Ins menu BB smartcontrol SmartControl Premium TETE eid gw PHILIPS Theft Deterrence Theft Deterrence protects your disphy against urauthorzed removal from your computer To Enable Theft Deterrence cick on Enable Theft Firsttime users wil require a Personal Identification Number PIN If the display is removed from this computer this PIN s neeced to authorize use on another computer Theft Deterrence Disabled PIN Optons Enable Theft lo enable Theft Deterrence clicking Enable Theft Deterrence Mode button brings up the following screen User can enter PIN between 4 and 9 digits numbers only After entering PIN Accept button takes user to the pop up dialog box on the following page Minimum minutes set to 5 Slider set to 5 by default Does not require the display be attached to a different host to go into Theft Deterrence D smartcontrol SmartControl Premium 2 Audio Adjust Auto Pot Input i Presets Theft Deterrence PHILIPS Preferences You can use the following opt
28. de r ception e Augmenter la distance entre l quipement et e r cepteur Brancher l quipement sur un autre circuit que celui utilis par le r cepteur Demander l aide du marchand ou d un technicien chevronn en radio t l vision Toutes modifications n ayant pas re u approbation des services comp tents en mati re de conformit est susceptible d interdire l utilisateur l usage du pr sent quipement N utiliser que des c bles RF arm s pour les connections avec des ordinateurs o p riph riques CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA 29 EN 55022 Compliance Czech Republic Only This device belongs to category B devices as described in EN 55022 unless it is specifi cally stated that it is a Class A devios on the specification label The following applies to devicss in Class A of EN 55022 radius of protection up to 30 meters The user of the device is obliged to take all steps necessary to remove sources of interference to tele communication or other devices Pokud neni na typov m titku po ta e uvedeno e spad do do tfidy A podle EN 56022 spada automaticky do tfidy B podle EN 55022 Pro zafizeni za azen do t dy A chrann p smo 30m podle EN 55022 plat n sledujici Dojde li k ru en telekomunika nich nebo in ch zafizeni je u ivatel povinnen prov st takov opatfgni aby ru en
29. ear Phase Adjust to the brightest setting to minimze movement on the screen Pth so O Z Phase 90 O9 Undo Auto Setup Bx PHILIPS Position Use the Position buttors to center the image on your display Using this tool you can positon the image up down left or right 1 Use the Up Down buttons to center the image vertically 2 Use the Left Right buttons to center the image horzontaly Undo Rasat PHILIPS Resolution You are curently at a Preferred resolution For your display to show crisp clear text colors and images Your display should be set to ts Preferred rosoluton Tf your dispky is at a Non Preferred resolution cick on tho Prefarred button to change vour resolution te Preferred T Enable Resolution Note Picture Format I 4 3 aspect ratio Preferred Color menu Color Menu allow you to adjust RGB Black Level White Point Color Calibration and SmartImage Please refer to SmartImage section You can follow the instruction and do the adjustment Refer to below table for
30. enter color setting there are three settings as below 1 Color Temperature The six settings are 5000K 6500K 7500K 8200K 9300K and 11500K with settings in the 5000K range the panel appears warm with a red white color tone while a 11500K emperature yields cool blue white oning 2 SRGB this is a standard setting for ensuring correct exchange of colors between different device e g digital cameras monitors printers scanners etc 3 User Define the user can choose his her preference color setting by adjusting red green blue color amp Note A measurement of the color of light radiated by an object while it is being heated his measurement is expressed in terms of absolute scale degrees Kelvin Lower Kevin temperatures such as 2004K are red higher temperatures such as 9300K are blue Neutral temperature is white at 6504K Q9 Can the Philips LCD Monitor be mounted on the wall Ans Q10 Ans Q11 Ans Q12 Ans Yes Philips LCD monitors have this optional feature Four standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories We recommend you to contact your Philips sales representative for more information Can connect my LCD monitor to any PC workstation or Mac Yes All Philips LCD monitors are fully compatible with standard PCs Macs and workstations You may need a cable adapt
31. er to connect the monitor to your Mac system Please contact your Philips sales representative for more information Are Philips LCD monitors Plug and Play Yes the monitors are Plug and Play compatible with Windows 7 Vista XP NT Mac OSX Linux What kind of wide angle technology is available Currently the IPS type panels offer the best Contrast Ratio compared to MVA or PVA technologies TN panels have improved over the years but IPS panel still gives superior results over TN panel Q13 What is Image Sticking or Image Burn in or After Image or Ghost Image in LCD panels Ans Uninterrupted display of still or static images over an extended period may cause burn in also known as after imaging or ghost imaging on your screen Burn in after imaging or ghost imaging is a well known phenomenon in LCD panel technology In most cases the burned in or atter imaging or ghost imaging will disappear gradually over a period of time after the power has been switched off Always activate a moving screen saver nitor unattended Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content A Warning Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Q14 Why is my Display not showing sharp text and is displaying jagged characters Ans You
32. er s 1 1 Safety precautions and maintenance ng instructions and nal invoice or cash Warnings Use of controls adjustments or procedures other than those specified in this documentation may result in exposure to shock electrical hazards and or mechanical hazards Read and follow these instructions when connecting and using your computer monitor Operation e Keep the monitor out of direct sunlight and away from stoves or any other heat source e Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor s electronics Do not block the ventilation holes on the cabinet When positioning the monitor make sure the power plug and outlet are easily accessible f turning off the monitor by detaching the power cable or DC power cord wait for 6 seconds before attaching the power cable or DC power cord for normal operation e Please use approved power cord provided by Philips all the time If your power cord is missing please contact with your local service center Please refer to Customer Care Consumer Information Center Do not subject the monitor to severe vibration or high impact conditions during operation Do not knock or drop the monitor during operation or transportation Maintenance To protect your monitor from possible damage do not put excessive pressure on the LCD panel When moving your monitor grasp the frame to lift do not lift the monitor by
33. everal types of sub pixel defects within each category Philips strives to deliver the highest quality products We use some of the industry s most advanced manufacturing processes and practice stringent quality control However pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable No manufacturer can guarantee that all panels will be free from pixel defects but Philips guarantees hat any monitor with an unacceptable number of defects will be repaired or replaced under warranty This notice explains the different types of pixel defects and defines acceptable defect evels for each type In order to qualify for repair or replacement under warranty the number of pixel defects on a TFT LCD panel must exceed hese acceptable levels For example no more han 0 0004 of the sub pixels on a 19 XGA monitor may be defective Furthermore Philips sets even higher quality standards for certain ypes or combinations of pixel defects that are more noticeable than others This policy is valid worldwide Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or on That is a bright dot is a sub pixel that stands out on the screen when the monitor displays a dark pattern There are the types of bright dot defects One lit red green or blue sub pixel rn m Fi pixel Two adjacent lit sub pixels
34. f your monitor 47 7 3 General FAQs Q1 Ans Q2 Ans When I install my monitor what should I do if the screen shows Cannot display this video mode Recommended resolution for Philips 22 680x1050 60Hz Unplug all cables then connect your PC to the monitor that you used previously n the Windows Start Menu select Settings Control Panel In the Control Panel Window select the Display icon nside the DisplayControl Panel select the Settings tab Under the setting tab in box abeled desktop area move the sidebar to 1680x1050 pixels 22 Open Advanced Properties and set the Refresh Rate to 60Hz then click OK Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1680x1050 60Hz 22 Shut down your computer disconnect your old monitor and reconnect your Philips LCD monitor Turn on your monitor and then turn on your PC What does the recommended refresh rate for LCD monitor Recommended refresh rate in LCD monitors is 60Hz In case of any disturbance on screen you can set it up to 75Hz to see if that removes the disturbance Q3 Ans Q4 Ans Q5 Ans Q6 Ans What are the inf and icm files on the CD ROM How do I install the drivers inf and icm These are the driver files for your monitor Follow the instructions in your user manual to install the drivers Your computer may ask you for monitor drivers inf and
35. ied program where every product model is tested by an accredited independent est laboratory TCO Certified represents one of he toughest certifications for displays worldwide Some of the Usability features of the TCO Displays 5 0 requirements Visual Ergonomics Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems Important parameters are Light levels without color tint Uniform color and luminance Wide color gamut 26 e Calibrated color temperature and gamma curve e Wide luminance level Dark black levels Low motion blur Electrical Safety Product fulfills rigorous safety standards Emissions Low alternating electric and magnet emissions Low acoustic noise emissions Some Environmental features of the TCO requirements The brand owner demonst social responsibility and has environmental managemen ISO 14001 Very low energy consu standby mode Restrictions on chlorinated and brominated flame retardants plasticizer and polymers Restrictions on heavy metals such as cadmium mercury and lead RoHS compliance ic fields of the Displays 5 0 rates corporate a certified system EMAS or ion both in on and mpt EPEAT www epeat net The EPEAT Electronic Product Environmental Assessment Tool e program evaluates computer desktops laptops and monitors based on 51 environmental criteria developed through a
36. in LCD panel technology In most cases the burned in or after imaging or ghost imaging will disappear gradually over a period of time after the power has been switched off e Always activate a moving screen saver program when you leave your monitor unattended e Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Image appears distorted Text is fuzzy or blurred Set the PC s display resolution to the same mode as monitor s recommended screen native resolution 45 Green red blue dark and white dots appears on the screen e The remaining dots are normal characteristic of the liquid crystal used in today s technology Please refer the pixel policy for more detail The power on light is too strong and is disturbing e You can adjust power on light using the power LED Setup in OSD main Controls EJ Audio problem No sound e Check if audio cable is connected to PC and monitor correctly Ensure audio is not muted Press OSD Menu select Audio then Mute Check it on Off position Press Volume in OSD main control to adjust the volume EI USB problem USB peripherals are not working Check if USB upstream cable is connected to your mon
37. ions to configure S 0 50 C 100 Select language Engish 2 SmartContrast On SrrartContrast off Economy PowerSensor Setting Power LED Button Brightness 3 mode 1B SmartControl SmartControl Premium Theft Deterrence Theft Deterrence protects your displey against reed 1 Te Preferences this PIN is needed computer audo Theft Deterrence Disabled Help PIN Options Bx PHILIPS Enable Theft After creating PIN the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button e Theft Deterrence Enabled is displayed e Disable I screen on next page heft Deterrence Mode opens pane gt e PIN Options button only available after user creates PIN button opens secure PIN web site Options gt Preferences Will only be active when selecting Preferences from the drop down Options menu On a non supported display capable of DDC CI only the Help and Options tabs are available 16 Mult Monitors LUE Help Displays current preference settings A checked box enables the feature The check box is a toggle Enable Context Menu on desktop is checked On by default Enable Context menu displays SmartControl Premium selections for Select Preset and Tune Display in the desktop right click context menu Disabled removes SmartControl Premium from the right click context menu Enable Task Tray icon is checked On by defaul
38. is completed If you want to launch later you can either click the shortcut on desktop or toolbar PHILIPS wwn philips comiwelcome Require steps Monitor driver and software installation gt Sater Langage Sprem requirements 12 First launch Wizard e The first time after installation of SmartControl Premium it will automatically go to Wizard for first time launch The wizard will guide you through adjustment your monitor performance step by step ou can go to Plug in menu to launch wizard later on as well ou can adjust more options without wizard by Standard pane W PHILIPS FB smartcontrot SmartControl Premium wizard Youll need to calbrate your display to get the most accurate color We encourage you to use the smpk tuning process by selecting the Start Wizard button This process involves a series of steps that vill let you tune your display and save the settings 1 Choose the Start Wizard button 2 Follow the steps outined in this process 3 Save your settings for future use Preferences aude Auto Pivot put go presets Theft Deterrence Multi Monitors Help Start Weard EJ Start with Standard pane Adjust menu e Adjust Menu allow you to adjust Brightness Contrast Focus Position and Resolution You can follow the instruction and do the adjustment Cancel prompts user if you want to cancel installation 1B SmartControl SmartControl Premium a
39. itor correctly e Turn your monitor OFF and ON once again You may need to install reinstall USB drivers in your PC and ensure hub is active e Reconnect your USB peripherals For further assistance refer to the Consumer Information Centers list and contact Philips customer service representative 7 2 SmartControl Premium FAQs Q1 Q2 I change the monitor on a PC to a different one and the SmartControl Premium becomes un usable what do I do Restart your PC and see if SmartControl Premium can work Otherwise you will need to remove and re install SmartControl Premium to ensure proper driver is installed The SmartControl Premium functions worked well before but it does not work anymore what can do If the following actions were executed the monitor driver may need to be re installed Changed video graphic adapter to another one Updated video driver Activities on OS such as service pack or patch Run Windows Update and updated monitor and or video driver Windows was booted with the monitor power off or disconnected To find out please right click My Computer and click on Properties gt Hardware gt Device Manager If you see Plug and Play Monitor shows under Monitor then you need to re install Simply remove SmartControl Premium and re install it Q3 Q4 Ans After installing SmartControl Premium when clicking on SmartControl Premium tab nothing shows up after a while or a fai
40. ls and a higher Gamma value produces darker pixels The default value for Gamma 5 2 2 To adjust Gamma Smartimage must be set to Of Click the SmartImage Off button before adjusting Gamme 1 Use the sider to select the desired Gamma Display Gamma Gz SmartImage Off undo Reset we PHILIPS Calibration Your display needs to be properly calibrated in order for it to produce the wdest range of colors accurately Calibration should aways take pace as the lest tuning step in the process Remember to recalbrete any time you make individual adjustments to image quaity or Whenever you move your display to a naw location 1 Make all other necessary adjustments to image quality fre 2 Press Show Me to learn how to use the calibration took 3 Finaly press Start to begin the calibration process 7 Enable color calibration Color software designed in colaboration with Joseph Holmes Protected by U S Patent Ilo 6 686 953 Show Me Start Quick view Show Me starts color calibration tutorial Start starts the 6 step color calibration sequence Quick View loads the before after images To return to Color home pane click the Cancel button Enable color calibration by default is on If unchecked does not allow for color calibration to happen dimes out start and quick view buttons Must have patent info in calibration screen First color Calibration Screen e Previous button is dis
41. lure message shows what happened It might be your graphic adaptor is not compatible with the SmartControl Premium If your graphic adaptor is one of the above mentioned brands try to download the most updated graphic adaptor ponding companies web site Install the driver Remove SmartControl Premium and re install tt once more lf it is still not working we are sorry that the graphic adaptor is not supported Please visit Philips website and check if an updated SmartControl Premium driver is available When I click on Product Information only partial information is shown what happened It might be your graphic card adaptor driver is not the most updated version which fully supporting DDC CI interface Please try to download the most updated graphic adaptor driver from corresponding companies web site Install the driver Remove SmartControl Premium and re install it once more ATTENTION Q5 forgot my PIN for Theft Deterrence Ans Function How can I do Philips Service center has a right to ask for legitimate identification and authorization in order to establish ownership of the monitor 46 Q6 Ans In a monitor with the Smartlmage feature the sRGB scheme of color temperature function in SmartControl Premium is not responding why When Smartlmage is enabled the sRGB scheme is disabled automatically lo use sRGB you need to disable Smartlmage with the BJ button at the front bezel o
42. ment stepping up backlighting for clearer crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds El Why do I need it You want the very best visual clarity and viewing comfort for every type of content SmartContrast dynamically controls contrast and adjusts backlighting for clear crisp bright gaming and video images or displays clear readable text for office work By reducing your monitor s power consumption you save on energy costs and extend the lifetime of your monitor EJ How does it work When you activate SmartContrast it will analyse the content you are displaying in real time to adjust colors and control backlight intensity This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games 3 3 SmartSaturate EJ What is it Smart technology that controls color saturation the degree to which one on screen color is blended in neighboring colors to deliver rich and vibrant images for more entertainment fun when you are viewing videos El Why do I need it You want rich vibrant images for more entertainment fun when viewing photos or videos EJ How does it work SmartSaturate dynamically controls color saturation the degree to which on screen color is blended in neighboring colors to deliver rich vibrant display for more entertainment fun when you are viewing images or videos in your display s Movie o
43. n extensive stakeholder consensus process supported by US EPA EPEAT system helps purchasers in the public and private sectors evaluate compare and select desktop computers notebooks and monitors based on their environmental attributes EPEAT also provides a clear and consistent set of performance criteria for the design of products and provides an opportunity for manufacturers to secure market recognition for efforts to reduce he environmental impact of its products Benefits of EPEAT Reduce use of primary materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT S requirement that all registered products meet ENERGY STAR energy efficiency specifications means that these products will consume less energy throughout their life CE Declaration of Conformity This product is in conformity with the following standards EN60950 1 2006 Safety requirement of nformation Technology Equipment EN55022 2006 Radio Disturbance requirement of Information Technology Equipment EN55024 1998 A1 2001 A2 2003 Immunity requirement of Information Technology Equipment EN61000 3 2 2006 Limits for Harmonic Current Emission EN61000 3 3 1995 A1 2001 A2 2005 Limitation ofVoltage Fluctuation and Flicker following provisions of directives applicable 2006 95 EC Low Voltage Directive 2004 108 EC EMC Directive 2005 32 EC EuP Directive EC No 1275 2008 mplementing Directive for Standby and Off mode power co
44. ng brightness contrast color and sharpness in real time Whether you re working with text applications displaying images or watching a video Philips Smartlmage delivers great optimized monitor performance El Why do I need it You want a monitor that delivers optimized display all your favorite types of content Smartlmage software dynamically adjust brightness contrast color and sharpness in real time to enhance your monitor viewing experience How does it work Smartlmage is an exclusive leading edge Philips technology that analyzes the content displayed on your screen Based on a scenario you select Smartlmage dynamically enhances the contrast color saturation and sharpness of images to enhance the contents being displayed all in real time with the press of a single button EJ How to enable SmartImage 1 Press to BD launch the SmartImage on screen display 2 Keep pressing BY to toggle between Office Photo Movie Game Economy and Off 3 The Smartlmage on screen display will remain on screen for 5 seconds or you can also press OK to make confirmation 4 When Smartlmage is enabled the sRGB scheme is disabled automatically lo use sRGB you need to disable Smartlmage with the EQ button at the front bezel of your monitor Except using ED key to scroll down you can also press w a buttons to choose and press OK to confirm selection and close the Smartlmage OSD There are six modes to be selec
45. nsumption and is produced by a manufacturing organization on ISO9000 level The product also comply with the following standards I509241 307 2008 Ergonomic requirement Analysis and compliance test methods for electronic visual displays GS EK1 2000 2009 GS mark requirement prEN50279 1998 Low Frequency Electric and Magnetic fields for Visual Display MPR II MPR 1990 8 1990 10 Low Frequency Electric and Magnetic fields TCO Displays 5 0 Requirement forEnvironment Labeling of Ergonomics Energy Ecology and Emission TCO Swedish Confederation of Professional Employees for TCO versions 27 Energy Star Declaration www energystargov This monitor is equipped with a function for saving energy which supports the VESA Display Power Management DPM standard This means that the monitor must be connected to a computer which supports VESA DPM Time settings are adjusted from the system unit by software operation Power Saving Alternative 2 One step Sleep typ Switch Off White Blinking 0 1W Of 0 08W As an ENERGY STAR Partner we have determined that this product meets the ENERGY STAR guidelines for energy efficiency amp Note We recommend you switch off the monitor when it is not in use for a long time Federal Communications Commission FCC Notice U S Only This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
46. odifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and or manufactured Therefore always check whether a product can be used in a specific country Just a click away In case of any problems we advise you to read the operating instructions carefully or go to the www philips com support website for additional support Just a phone call away n order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting our dealers or nformation Centers n case your Philips product is not working correctly or is defective please contact your Philips dealer or directly the Philips Service and Consumer Information Centers Website http www philips com support Consumer Information Centers Argentina Australia Brasil Canada ew Zealand Belarus Bulgaria Croatia Czech Republic Estonia United Arab Emirates Hong Kong Hungary India Indonesia srael Latvia Lithuania Malaysia iddle East North Africa New Zealand Pakistan Romania Russia Serbia amp Montenegro Singapore Slovakia Slovenia South Africa South Korea Taiwan Philippines Thailand Turkey Ukraine Vietnam m astern Europe ELARUS Technic al Center of JV IBA Bogdanovich str 155 BY 220040 Minsk Tel 375 17
47. on Fri 8 30am 5 30pm Asia HONG KONG Macau Company Name PHK Service Limited Address Flat A 10 F Pak Sun Building 103 107 Wo Yi Hop Road Kwai Chung New Territories Hong Kong Tel 852 2610 6908 852 2610 6929 for Hong Kong and 853 2856 2277 for Macau Fax 852 2485 3574 for Hong Kong and 853 2856 1498 for Macau E mail enquiry phkservice com hk Service Hours Mon Sat 09 00am 06 00pm India Company REDINGTON INDIA LTD Address SPL Guindy House 95 Mount Road Chennai 600032 India Tel 9144 42243352 353 E mail aftersales in aocmonitorcom Service hours Mon Fri 9 00AM 5 30PM Sat 9 00AM 1 00PM Indonesia Company Name PT Gadingsari elektronika Prima Address Kompleks Pinang 8 JI Ciputat raya No 8F Pondok Pinang Jakarta Tel 021 750909053 021 750909056 Fax 021 7510982 E mail gepta cbn net id Service hours Mon Fri 8 30am 4 30pm Sat 8 30am 2 00pm Additional service points 1 Philips Building Jl Buncit Raya Kav 99 Jakarta Selatan Phone 021 7940040 ext 1722 1724 98249295 70980942 2 JI Tanah Abang 1 no 12S Jakarta Pusat Phone 021 3455150 34835453 3 Rukan City Home no H31 Gading Square JI Bulevar Barat Kelapa Gading Jakarta Utara Phone 021 45870601 98131424 South Korea Company PCS One Korea Ltd Address 112 2 Banpo dong Seocho ku Seoul 137 040 Korea Call Center Tel 080 600 6600 Tel 82 2 591 1528 Fax 82 2 595 9688
48. ountries Warranty coverage begins as from the day you buy your monitor For three years thereafter your monitor will be swapped by at least an equivalent monitor in case of defects provided for under the warranty coverage The swap monitor remains yours and Philips keeps the defective original monitor For the swap monitor the warranty period remains equal to that of your original monitor being 36 months as from the purchase date of your original monitor 32 What is excluded The Philips First Choice Warranty applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and mode production number of the product and The Philips First Choice Warranty may not apply if e The documents have been altered in any way or made illegible e The model or production number on the product has been altered deleted removed or made illegible e Repairs or product modifications and alterations have been executed by unauthorized service organizations or persons Damage is caused by accidents including but not limited to lightning water or fire misuse or neglect e Reception problems caused by signal conditions or cable or antenna systems outside the unit e Defects caused by abuse or misuse of the monitor e Product requires modification or adapta
49. ower Used LED color Mode Active ON Yes Yes 24W typ White 43W max with audio and USB x 4 typ Blinking a AG O This monitor is ENERGY STAR compliant As an ENERGY STAR Partner we have determined that this product meets the ENERGY STARS guidelines for energy efficiency The following setup is used to measure power consumption on this monitor Native resolution 1680x1050 Contrast 50 Brightness 250 nits Color temperature 6500k with full white pattern Audio and USB Inactive Off e Note This data is subject to change without notice 5 Regulatory Information Lead free Product 7 Lead free disp environmental di e ay promotes y sound recovery and sposal of waste from electrical and ectronic equipment Toxic substances like Lead has been eliminated and compliance with European community s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle TCO Displays 5 0 Information Congratulations Your display is designed for both you and the planet Ti CERTIFIED This display carries the TCO Certified label This ensures that he display is designed for minimal impact on the climate and natural environment while offering all the performance expected from top of the ine electronic products TCO Certified is a third party verif
50. perating SmartControl cick the Tech support button You have the opton to fill out an Assstance Form Adjust You can also choose to have information about your software automatically attached to the assistance Fam Vail need tobe enki to und ETEEN Coor Updzte em Display 1D Eco a System D EG Verson User Manual Tech Support Help gt Version Will only be active when selecting Version from the drop down Help menu On a non supported display capable of DDC CI only the Help and Options tabs are available 1B smartcontrol 6783 SmartControl Premium PHILIPS Version SmartControl Version 0 00 EVALUATION dtune plp R2009 1217 1913 04 wire DDC CI Communication Yes PDI APE Copyright 1993 2009 Portrait Displays Inc A Update Dspley D System D 18 Context Sensitive menu The Context Sensitive menu is Enabled by default If Enable Context Menu has been checked in the Options gt Preferences pane then the menu will be visible a SmartControl Select Preset gt w Off Office Photo Movie Game Economy The Context Menu has four entries SmartControl Premium When selected the About Screen is displayed e Select Preset Provides a hierarchical menu of saved presets for immediate use A check mark shows the currently selected preset Facoty Preset can also be called from the drop down menu Tune Display Opens the SmartControl Premium control panel Smartlmage Check current set
51. performance or select functions of the monitors directly through an on screen instruction window A user friendly on screen display interface is shown as below PHILIPS Monitor Setup Basic and simple instruction on the control keys In the OSD shown above users can press y a buttons at the front bezel of the monitor to move the cursor OK to confirm the choice or change The OSD Menu Below is an overall view of the structure of the On Screen Display You can use this as a reference when you want to work your way around the different adjustments later on Main menu Sub menu Auto r VGA Input DVI available for selective models r Office SmartImage Photo Movie Game H Economy O Picture Format Wide screen 4 3 Picture Brightness 0 100 Contrast 0 100 SmartContrast On Off Gamma 1 8 2 0 2 2 2 4 2 6 r Volume 0 100 H Audio H Stand Alone On Off Mute On Off Color Temp 5000K 6500K 7500K 8200K 9300K 11500K H Color H sRGB User Define p Red 0 100 t Green 0 100 L Blue 0 100 Language English Espa ol Fran ais Deutsch Italiano Portugu s Pycckni FRE SZ Horizontal 0 100 OSD Setting H Vertical 0 100 Transparency Off 1 2 3 4 OSD Time out 5 10 20 30 60 r Power LED 0 1 2 3 4 L Setup H Pixel Orbiting On
52. r Game mode It is turned off for top quality display of office application and in the Economy mode to reduce power consumption 11 3 4 SmartSharpness EM What is it Smart technology that enhances sharpness when you need it for ultimate display performance and more entertainment fun when you are viewing videos or photos El Why do I need it You want the ultimate in sharpness for more entertainment fun when viewing photos or videos EJ How does it work Smart technology enhances sharpness when you need it for ultimate display performance and more entertainment fun when you are viewing videos or photos in the Movie or Game mode It is turned off for top quality display of office applications and in the Economy mode to reduce power consumptions 3 5 Philips SmartControl Premium The new SmartControl Premium software by Phillips allows you to control your monitor via an easy to use on screen graphic interface Complicated adjustments are a thing of the past as this user friendly software guides you through fine tuning resolution Color calibration Clock Phase adjustments RGB White point adjustment etc Equipped with latest technology in core algorithm for fast processing and response this Windows 7 compliant eye catching animated Icon based software is ready to enhance your experience with Philips monitors EX Installation Follow the instruction and complete the installation You can launch after installation
53. r Information Center 0800004551 Datalan Servisne Stredisko Puchovska 8 SK 831 06 Bratislava Tel 421 2 49207155 Email servis datalan sk SLOVENIA PC HAND Brezovce 10 SI 1236 Trzin Tel 386 1 530 08 24 Email servis pchand si RUSSIA CPS 18 Shelepihinskaya nab 123290 Moscow Russia Tel 7 495 797 3434 Profservice 14A 3 2Karacharovskaya str 109202 Moscow Russia Tel 7 095 170 5401 TURKEY Turk Philips Ticaret A S Yukari Dudullu Org San Bolgesi 2 Cadde No 22 34776 Umraniye Istanbul Tel 0800 261 33 02 UKRAINE Comel Shevchenko street 32 UA 49030 Dnepropetrovsk Tel 380 562320045 www csp comel com LLC Topaz Company Topaz Service Company Mishina str 3 Kiev Ukraine 03151 Tel 38 044 245 73 31 Latin America ARGENTINA Azopardo 1480 C1107ADZ Cdad de Buenos Aires Tel 0800 3330 856 Email CIC monitores Philips com BRASIL Alameda Raja Gabaglia 188 10 Andar V Olimpia S Paulo SP CEP 04551 090 Brasil Tel 0800 7254101 Email CIC monitores Philips com Pacific AUSTRALIA Company AGOS NETWORK PTY LTD Address 4 5 Dursley Road Yenorra NSW 2161 Australia Tel 1300 360 386 Fax 61 2 80808147 Email philips agos com au Service hours Mon Fri 8 00am 7 30pm NEW ZEALAND Company Visual Group Ltd Address 28 Walls Rd Penrose Auckland Phone 0800 657447 Fax 09 5809607 E mail vai ravindranQvisualgroup co nz Service Hours M
54. r LCD monitor works best at its native resolution of 1680x1050 60Hz For best display please use this resolution 50 2010 Koninklijke Philips Electronics N V All rights reserved Philips and the Philips Shield Emblem are registered trade marks of Keninkiljke Philips Electronics N V and are used under license from Knoinkljke Philips Elecrtonics N V Specifications are subject to change without notice Version 220P2 v 1 0 PHILIPS
55. s considered proof of purchase Attach it o this owner s manual and keep both nearby WHAT IS COVERED Warranty coverage begins the day you buy your product For three years thereafter all parts will be repaired or replaced and labor is free After three years from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the original product expires the warranty on all replaced and repaired products and parts also expires WHAT IS EXCLUDED Your warranty does not cover abor charges for installation or setup of the product adjustment of customer controls on he product and installation or repair of antenna systems outside of the product product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control o Electronics reception problems caused by f Philips Consumer signal conditions or cable or antenna systems outs ide the unit a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications incidental or consequential damages resulting from the product Some states do not allow the exclu
56. sion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted the model or production number on the product has been altered deleted removed or made illegible Where IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics In countries where Philips Consumer Electronics does not distribute he product the local Philips service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available Where CAN GET MORE INFORMATION For more information contact the Philips Customer Care Center by calling 877 835 1838 U S A customers only or 919 573 7855 Before Requesting Service Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing Philips Customer Care Center 877 835 1838 or 919 573 7855 In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular
57. sub menu item base on your input Example for Color Calibration BB smartcontrol SmartControl Premium Calbration Adjust Eco Options ap Smartimage 8 snartcontol SmartControl Premium sd Black Level va a Eco Display Gamma 1 M Options Smartimage Help EE PHILIPS RGB Al displayed colors are produced by mixing Red Bue and Green at dfferent brightness levels Choosing a neutral White Point will give you optimal RGB If you prefer to adjust the RGB now follow these steps 1 Adjust the intensity of the Red Green and Blue using the sider bars NOTE Changing the RGB values can adversely effect the displayed colors Red 100 Ow Green 100 Ow Be 100 Ow undo Reset PHILIPS white Point White Point is the point at which equal combinations of red green and blie light at ful ntensty create white This effects the overal cobr qualty For tha most accurate colors click the Reset button then select the White Point 1 Please select the White Point value for tha hast possible calor quaity Whte paint 6500K 9 w Undo Reset N w W smaricoatrol SmartControl Premium g ra ckm Options Smartimage gh smartcontrot SmartControl Premium Adjust RGR pa vin Pon Display Gamma w ip Options SmartImage ww PHILIPS Display Gamma Gamma is a component of the pixel brightness m a spay A lower Gamra value produces brighter pixe
58. t Enable context menu shows the task tray menu for SmartControl Premium A right click on the task tray icon displays the menu options for Help Technical Support Check for Upgrade About and Exit When Enable task tray menu is disabled the task tray icon will only display EXIT Run at Startup is checked On by default When disabled SmartControl Premium will not launch at start or be in the task tray The only way to launch SmartControl Premium is either from the desktop short cut or from the program file Any preset set to run at startup will not load when this box is unchecked Disabled Enable transparency mode Windows 7 Vista XP Default is 0 Opaque Options gt lnput Will only be active when selecting Input from the drop down Options menu On a non supported display capable of DDC CI only the Help and Options tabs are available All other SmartControl Premium tabs are not available Options gt Audio Will only be active when selecting Volume from the drop down Options menu On a non supported display capable of DDC CI only the Help and Options tabs are available 1B SmartControl x D Smartcontrol Bx SmartControl Premium PHILIPS SmartControl Premium PHILIPS Input Audio Your display has two inputs connections on back of Adjust the Volume of the integrated loudspeakers by this display so you can hook up two different sources using the slider at the same time Use the Analog In and Digital In but
59. t to be disposed of All redundant packing material has been omitted We have done our utmost to make the packaging easily separable into mono materials Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative Recycling Information for Customers There is currently a system of recycling up and running in the European countries such as The Netherlands Belgium Norway Sweden and Denmark In Asia Pacific Taiwan the products can be taken back by Environment Protection Administration EPA to follow the IT product recycling management process detail can be found in web site www epa gov tw The monitor contains parts that could cause damage to the nature environment Therefore it is vital that the monitor is recycled at the end of its life cycle For help and service please contact Consumers Information Center or First Choice Contact nformation Center in each country El Install base stand 2 Setting up the monitor 1 Place the monitor face down a smooth surface taking care to avoid scratching or damaging 2 1 Installation the screen EI Package contents 2 Snap in the base in the VESA mount area PHILIPS Monitor Quick start guide Z EDFU CD Base stand E z LJ Eg E Power cord VGA signal cable optional LB SSD ae DVI cable optional EJ Connecting to your PC o
60. ted Office Photo Movie Game Economy and Off ED Smart Image Office Office Enhances text and dampens brightness to increase readability and reduce eye strain This mode significantly enhances readability and productivity when you re working with spreadsheets PDF files scanned articles or other general office applications Photo This profile combines color saturation dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors all without artifacts and faded colors Movie Ramped up luminance deepened color saturation dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display Game Turn on over drive circuit for best response time reduce jaggy edges for fast moving objects on screen enhance contrast ratio for bright and dark scheme this profile delivers the best gaming experience for gamers Economy Under this profile brightness contrast are adjusted and backlighting fine tuned for just right display of everyday office applications and lower power consumption Off No optimization by Smartlmage 10 3 2 SmartContrast EM What is it Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor s contrast ratio for maximum visual clarity and viewing enjoy
61. the date of purchase dealer s name and model and production number of the product The Philips guarantee may not apply if the documents have been altered in any way or made illegible the model or production number on the product has been altered deleted removed or made illegible repairs or product modifications and alterations have been executed by unauthorized service organizations or persons damage is caused by accidents including but not limited to lightning water or fire misuse or neglect 43 Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and or manufactured Therefore always check whether a product can be used in a specific country In case your Philips product is not working correctly or is defective please contact your Philips dealer In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country the telephone and fax number of which can be found in the relevant part of this booklet In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting your dealer If you have questions which your dealer cannot answer or any related question ple
62. therlands Norway Portugal Sweden Switzerland Spain United Kingdom Poland EASTERN EUROPE Czech Republic Hungary Russia Slovakia Slovenia Turkey LATIN AMERICA Argentina Brasil NORTH AMERICA Canada USA PACIFIC Australia New Zealand ASIA China Hong Kong India Indonesia Korea Malaysia Pakistan Philippines Singapore Taiwan Thailand Vietnam AFRICA South Africa MIDDLE EAST United Arab Emirates Your Philips First Choice Warranty Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease of installation Should you encounter any difficulties while installing or using this product please contact the Philips helpdesk directly to benefit from your Philips First Choice Warranty This three year service warranty entitles you to a swap model on site if your monitor turns out to be faulty or defective Philips aims at a swap within 48 hours of your call being received What is covered The Philips First Choice Warranty applies within Andorra Austria Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Liechtenstein Luxembourg Monaco the Netherlands Norway Poland Portugal Sweden Switzerland Spain and the United Kingdom and only for monitors originally designed manufactured approved and or authorized for usage within these c
63. tic images over an extended period may cause burn in also nown as after imaging or ghost imaging on your screen Burn in after imaging or ghost imaging is a well known phenomenon in LCD panel technology In most cases the burned in or after imaging or ghost imaging will disappear gradually over a period of time after the power has been switched off A Warning Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Service e The casing cover should be opened only by qualified service personnel If there is any need for any document for repair or integration please contact with your local service center please refer to the chapter of Consumer Information Center e For transportation information please refer to Technical Specifications Do not leave your monitor in a car trunk under direct sun light amp Note Consult a service technician if the monitor does not operate normally or you are not sure what procedure to take when the operating instructions given in this manual have been followed 1 2 Notational Descriptions The following subsections describe notational conventions used in this document Notes Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type These blocks contain
64. tings Office Photo Movie Game Economy Off Task Tray Menu Enabled The task tray menu can be displayed by right clicking on the SmartControl Premium icon from the task tray Left Click will launch the application Help Technical Support Check for Update About The task tray has five entries e Help Access to User Manual file Open User Manual file using the default browser window e echnical Support displays the tech support page Check for Update takes the user to PDI Landing and checks the user s version against the most current available e About Displays detailed reference information product version release information and product name Exit Close SmartControl Premium To run SmartControl Premium again either select SmartControl Premium from Program menu double click the desktop PC icon or restart the system PHILIPS SmartControl SmartControl version 3 20 dtune standard R2007 01 04 1151 23 Copyright 1993 2007 Portrait Displays Inc Patents Pending Task Tray Menu Disabled When the Task Tray is disabled in the preference folder only the EXIT selection is available To completely remove SmartControl Premium from the task tray disable Run at Startup in Options gt Preferences 19 3 6 Philips Flat Panel Monitors Pixel Types of Pixel Defects Defect Policy Pixel and sub pixel defects appear on the screen in different ways There are two categories of pixel defects and s
65. tion to enable it to comply with local or national technical standards which apply in countries for which the product was not originally designed manufactured approved and or authorized Therefore always check whether a product can be used in a specific country e Note that products that are not originally designed manufactured approved and or authorized for usage within the Philips F1rst Choice countries do not apply to the Philips First Choice Warranty In these cases the Philips global warranty terms are valid 33 Just a click away In case of any problems we advise you to read the operating instructions carefully or go to the www philips com support website for additional support Just a phone call away In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully or go to the www philips com support website for additional support before contacting the Philips helpdesk lo solve your problem quickly please prepare the following details before contacting the Philips helpdesk e Philips type number e Philips serial number e Purchase date copy of purchase may be required PC environment Processor o CUP and Graphic card name and driver version o Operating system o Application being used Other cards installed Having the following information available will also help speed up the process e Your proof of purchase indi
66. tons to select which source you d Ike to view You Turn off the intagratad loudspeakers by chacking tha are currently viewing the analog in image Preferences 2 Mute checkbox Preferences IMPORTANT IF you switch inputs SmartControl may F Mute lose the abiiy to control your monitor In this case you Ao may hava to use the Input Select button on the front x of your monitor to switch back to the original input i before SmartControl functionality can be restored s Coor Auto Pivot Color Auto Pivot Eco ie Adjust Theft Deterrence sa vas 100 d Muti Monitors Multi Montors z Ow Help Analog In Digital m adjust Wizard EX Thert Deterence Help Undo e Display the Source instruction pane and Option gt Auto Pivot current input source setting i F Wi Smartcontrol 2 On single input displays this pane will not be visible SmartControl Premium PHILIPS Auto Pivot To manually rotate the screen image click rotation pas ga GA Auto Phot box to dabi automatic Ban 2 RES T Enable Auto Pivot Q 3 Color A em int Eco Wizard Ke br Options Theft Deterrence Muti Mentor 0 90 Help 180 270 17 Help gt User Manual Will only be active when selecting User Manual from the drop down Help menu On a non supported display capable of DDCICI only the Help and Options tabs are available W SmartControl Bx SmartControl Premium PHILIPS User Manual If you need help setting up or o
67. urs until 20 00 Fax 972 3 6458759 E mail eastronics eastronics co il Service hours Sun Thurs 08 00 18 00 Your Philips First Choice Warranty USA Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease of installation Should you encounter any difficulties while installing or using this product please contact Philips directly to benefit from your Philips First Choice Warranty This three year service warranty entitles you to a swap model on site within 48 hours of your call being received within the first year of purchase If you have any problems with your monitor within the second or third year of purchase we will repair it after it has been sent to the service provider at your expense and returned to you within five working days free of charge LIMITED WARRANTY Computer Monitor Click here to access the Warranty Registration Card Three Years Free Labor Three Years Free Service on Parts One Year Exchange Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year This product must be shipped in at your expense for service during years two and three WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product i

Philips Brilliance LCD monitor with Pivot base, USB, Audio 220P2EB

Contents

Download Pdf Manuals

Related Search

Related Contents