Indesit PWDE 8148 S
Contents
1. two or three people and handle it with the utmost care Never try to do this alone because the appliance is very heavy Before loading laundry into the washer dryer make sure the drum is empty e During the drying phase the door tends to get quite hot e Do not use the appliance to dry clothes that have been washed with flammable solvents e g trichlorethylene 4 Pull outwards using the tab as indicated in the figure until the plastic tie rod is freed from its stop position pull downwards and open the door at the same time 5 Reposition the panel making sure the hooks are securely in place before you push it onto the appliance 11 Care and maintenance Cutting off the water and electricity supplies e Turn off the water tap after every wash cycle This will limit wear on the hydraulic system inside the washer dryer and helo to prevent leaks e Unplug the washer dryer when cleaning it and during all maintenance work Cleaning the washer dryer The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives Cleaning the detergent dispenser drawer To remove the drawer press lever 1 and pull the drawer outwards 2 see figure Wash it under running water this procedure should O be repeated frequently Cleaning the pump The washer dryer is fitted with a self cleaning pump which does not requi2. Wash cycles and options e The drain hose is bent see I nstallation e The drainage duct is clogged The washer dryer vibrates a lot e he drum was not unlocked correctly during installation see Installation during the spin cycle e The washer dryer is not level see Installation e The washer dryer is trapped between cabinets and walls see I nstallation The washer dryer leaks e The water inlet hose is not screwed on properly see Installation e The detergent dispenser drawer is blocked for cleaning instructions see Care and maintenance e The drain hose is not fixed properly see Installation The option and START PAUSE e Switch off the machine and unplug it wait for approximately 1 minute and indicator lights flash rapidly and then switch it back on again an error code appears on the If the problem persists contact the Technical Assistance Service display e g F 01 F There is too much foam e The detergent is not suitable for machine washing it should display the text for washer dryers or hand and machine wash or the like e Too much detergent was used The washer dryer does not dry The appliance is not plugged into the socket or not enough to make contact There has been a power failure The appliance door is not shut properly A DELAY TIMER has been set DRYING is in the OFF position 13 Service Before contacting the Technical
3. Special wash cycles Jeans turn the garments inside out before washing and use liquid detergent Use wash cycle 5 Shirts use special wash cycle 6 to wash shirts in various fabrics and colours It guarantees maximum care is taken of the garments and minimises the formation of creases 10 Wool wash cycle 7 can be used to wash all woollen garments in the machine even those carrying the hand wash only H label To achieve the best results use a special detergent and do not exceed the maximum load of 2 kg Delicates use special wash cycle 8 to wash all silk garments We recommend the use of special detergent which has been designed to wash delicate clothes Curtains we recommend you fold the curtains and place them in a pillow case or mesh bag Use wash cycle 8 Duvet to wash double or single duvets the weight of which should not exceed 3 kg cushions or clothes padded with goose down such as puffa jackets use the special wash cycle number 9 Duvet We recommend that duvets are placed in the drum with their edges folded inwards see figure and that no more than of the total volume of the drum is used To achieve the best results we recommend that a liquid detergent is used and placed inside the detergent dispenser drawer Sport Shoes wash cycle 10 is for washing sports shoes for best results do not wash more than 2 pairs simultaneously Load balancing system Before every spin cycle to avoid exces
4. Do not touch the drained water as it may reach extremely high temperatures Never force the porthole door This could damage the safety lock mechanism designed to prevent accidental opening If the appliance breaks down do not under any circumstances access the internal mechanisms in an attempt to repair it yourself optimise the cost of re using and recycling the materials inside the machine while preventing potential damage to the atmosphere and to public health The crossed out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection For more information relating to the correct disposal of household appliances owners should contact their local authorities or appliance dealer Opening the porthole door manually In the event that it is not possible to open the porthole door due to a powercut and if you wish to remove the laundry proceed as follows 1 Remove the plug from the electrical socket 2 Make sure the water level inside the machine is lower than the door opening if it is not remove excess water using the drain hose collecting it in a bucket as indicated in the figure 3 Remove the cover panel on the lower front part of the washer dryer see overleaf e Always keep children well away from the appliance N while it is operating e The door can become quite hot during the wash cycle m e f the appliance has to be moved work in a group of Ss
5. water tab using a 3 4 gas threaded connection see figure Before performing the connection allow the water to run freely until it is perfectly clear 2 Connect the inlet hose to the washer dryer by screwing it onto the corresponding water inlet of the appliance which is situated on the top right hand side of the rear part of the appliance see figure 3 Make sure that the hose is not folded over or bent The water pressure at the tap must fall within the range of values indicated in the Technical data table see next page if the inlet hose is not long enough contact a specialised shop or an authorised technician T Never use second hand hoses Use the ones supplied with the machine 1 inbesit Connecting the drain hose e the supply voltage is included within the values ndicated on the Technical details table Connect the drain hose see page 5 without bending it to a draining duct or a wall e the socket is compatible with the washing drain situated between machine s plug If this is not the case replace 65 and 100 cm from the socket or the plug the floor Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use Before using the appliance please read the instructions below The drain hose may be WARNING THIS APPLIANCE MUST BE EARTHED connected to an THE FOLLOWING OPERATIONS SHOULD BE under sink trap Before CAR
6. 4 kg If your laundry load to be washed and dried is much greater than the maximum stated load see adjacent table of programmes perform the wash cycle and when the cycle is complete divide the garments into groups and put some of them back in the drum At this point follow the instructions provided for a Drying only cycle Repeat this procedure for the remainder of the load A cooling down period is always added to the end of each drying cycle Drying only Use the cycle selector knob to select a drying cycle 11 12 13 in accordance with the type of fabric The desired drying level or time may also be set using the DRYING button z0x SMART 2a lt amp Modify the cycle settings e Press the button to enable the option the indicator light corresponding to the button will switch on e Press the button again to disable the option the indicator light will switch off if the selected option is not compatible with the set wash cycle the indicator light will flash and the option will not be activated T If the selected option is not compatible with a previously selected one the indicator light corresponding to the first function selected will flash and only the second option will be activated the indicator light for the option which has been activated will be illuminated Note if the SMART option has been selected none of the incompatible options may be activated T The options may affect the recommended load valu
7. Assistance Service e Check whether you can solve the problem alone see Troubleshooting e Restart the wash cycle to check whether the problem has been solved e f this is not the case contact an authorised Technical Assistance Centre Always request the assistance of authorised technicians Have the following information to hand e the type of problem e the appliance model Mod e the serial number S N This information can be found on the data plate applied to the rear of the washer dryer and can also be found on the front of the appliance by opening the door 14 Guarantee 1 invesit 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer s guarantee which covers the cost of breakdown repairs for twelve months from the date of purchase This gives you the reassurance that if within that time your appliance is proven to be defective because of either workmanship or materials we will at our discretion either repair or replace the appliance at no cost to you This guarantee is subject to the following conditions The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions The appliance is used only on the electricity or gas supply printed on the rating plate The appliance has been used for normal domestic purposes only The appliance has not been altered serviced maintained dismantled or o
8. if applicable appear in section B amp Main wash Rinse spin Drain Drying The icons corresponding to temperature spin and drying working from the left are displayed in section The temperature bars Iff indicate the maximum temperature level which may be selected for the set cycle The spin bars tif indicate the maximum spin level which may be selected for the set cycle The 20 symbol lights up while the drying settings are being adjusted How to run a wash cycle ora drying cycle 1 SWITCH THE MACHINE ON Press the button the START PAUSE indicator light will flash slowly in a blue colour 2 LOAD THE LAUNDRY Open the porthole door Load the laundry making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page 3 MEASURE OUT THE DETERGENT Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in Detergents and laundry 4 CLOSE THE DOOR 5 SELECT THE WASH CYCLE Use the WASH CYCLE SELECTOR knob to select the desired wash cycle A temperature and spin speed is set for each wash cycle these values may be adjusted The duration of the cycle will appear on the display 6 CUSTOMISE THE WASH CYCLE Use the relevant buttons 3 Modify the temperature and or spin speed he machine automatically displays the maximum temperature and spin
9. speed values set for the selected cycle or the most recently used settings if they are compatible with the selected cycle The temperature can be decreased by pressing the Fc button until the cold wash OFF setting is reached The spin speed may be progressively reduced by pressing the button until it is completely excluded the OFF setting If these buttons are pressed again the maximum values are restored gt d lt Setting the drying cycle The first time the button ren is pressed the machine will automatically select the maximum drying cycle which is compatible with the selected wash cycle Subsequent presses will decrease the drying level and then the drying time until the cycle is excluded completely OFF If these buttons are pressed again the maximum values are restored Drying may be set as follows A Based on the desired laundry dryness level Iron suitable for clothes which will need ironing afterwards the remaining dampness softens creases making them easier to remove A1 appears on the display Hanger ideal for clothes which do not need to be dried fully A2 appears on the display Cupboard suitable for laundry which can be put back in a cupboard without being ironed A3 appears on the display Extra suitable for garments which need to be dried completely such as sponges and bathrobes A4 appears on the display B Based on a set time period between 30 and 180 minutes Max load
10. washer dryer from its packaging 2 Make sure that the washer dryer has not been damaged during the transportation process If it has been damaged contact the retailer and do not proceed any further with the installation process 3 Remove the 4 protective screws used during transportation and the rubber washer with the corresponding spacer located on the rear part of the appliance see figure 4 Close off the holes using the plastic plugs provided 5 Keep all the parts in a safe place you will need them again if the washer dryer needs to be moved to another location Packaging materials should not be used as toys for children Levelling 1 Install the washer dryer on a flat sturdy floor without resting it up against walls furniture cabinets or anything else 2 If the floor is not perfectly level compensate for any unevenness by tightening or loosening the adjustable front feet see figure the angle of inclination measured in relation to the worktop must not exceed 2 Levelling the machine correctly will provide it with stability helo to avoid vibrations and excessive noise and prevent it from shifting while it is operating If it is placed on carpet or a rug adjust the feet in such a way as to allow a sufficient ventilation space underneath the washer dryer Connecting the electricity and water supplies Connecting the water inlet hose 1 Connect the inlet hose by screwing it to a cold
11. 733 which is accessible without moving the than 15cms 6 inches If the hose is pushed down appliance too far this may cause the machine to self syphon ie continuously empty as it is filling Disposing of the plug Ensure that before disposing of the plug itself you make the pins unusable so that it cannot be Before plugging the appliance into the mains accidentally inserted into a socket socket make sure that Electric connection Instructions for connecting cable to an alternative plug e the socket is earthed and in compliance with the Important the wires in the mains lead are coloured in applicable law accordance with the following code Green amp Yellow Earth e the socket is able to sustain the appliance s Blue Neutral maximum power load indicated in the Technical Brown Live details table see page 5 As the colours of the wires in the lead may not correspond with the coloured markings identifyng the terminals in your plug proceed as follows Connect Green amp Yellow wire to terminal marked E or or coloured Green or Green amp Yellow Connect Brown wire to terminal marked L or coloured Red Connect Blue wire to terminal marked N or coloured Black Ifa 13 amp plug BS 1368 is used it must be fitted with a 13 amp fuse either in the plug or adaptor or at the distribution board If you are in any doubt the electrical supply to your machine consult a qualified electrician before use How to connect an al
12. Instructions for use WASHER DRYER Lu This symbol reminds you to read this instruction manual cB Contents English 1 Installation 2 3 4 5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washer dryer 6 7 Control panel Display How to run a wash cycle or a drying cycle 8 Wash cycles and options 9 PWDE 8148 W Table of programmes and wash cycles Wash options Detergents and laundry 10 Detergent dispenser drawer Preparing the laundry Special wash cycles Precautions and advice 11 General safety Disposal Opening the porthole door manually Care and maintenance 12 Cutting off the water and electricity supplies Cleaning the washer dryer Cleaning the detergent dispenser drawer Cleaning the pump Checking the water inlet hose Troubleshooting 13 Service and Guarantee 14 15 16 Before calling for Assistance Guarantee 1 inbesit Installation l This instruction manual should be kept in a safe place for future reference If the washer dryer is sold transferred or moved make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself herself with its operation and features Read these instructions carefully they contain vital information relating to the safe installation and operation of the appliance Unpacking and levelling Unpacking 1 Remove the
13. RIED OUT BY A QUALIFIED ELECTRICIAN connecting the drain hose from the machine Replacing the fuse ensure that any blanks When replacing a faulty fuse a 13 amp ASTA ee or removable ends approved fuse to BS 1362 should always be used cee weenie have been taken off and the fuse cover re fitted If the fuse cover is lost out end or epee the spigot the plug must not be used until a replacement is remove the blanking cap obtained Replacement fuse covers If it is place over the If a replacement fuse cover is fitted it must be of the edge of a basin or sink correct colour as indicated by the coloured marking be sure the free end of or the colour that is embossed in words on the base the hose should not be of the plug Replacements can be obtained directly underwater from your nearest Service Depot Removing the plug If your appliance has a non rewireable moulded plug and you should wish to re route the mains cable through partitions units etc please ensure that either We advise against the use of hose extensions in the plug is replaced by a fused 13 ampere re case of absolute need the extension must have the wearable plug bearing the BSI mark of approval same diameter as the original hose and must not or exceed 150 cm in length the mains cable is wired directly into a 13 amp cable Ensure that if the drain hose is pushed into a outlet controlled by a switch in compliance with BS standpipe that the end does not go down more 5
14. a wash cycle this wash cycle will be cancelled WASH CYCLE SELECTOR KNOB used to set the desired wash cycle see Table of programmes and wash cycles OPTION buttons and indicator lights press to select the available options The indicator light corresponding to the selected option will remain lit SPIN button press to reduce or completely exclude the spin cycle the value appears on the display TEMPERATURE button press to reduce or completely exclude the temperature the value appears on the display Q indicator light O p DISPLAY af O 0 9 Lo SPIN DRYING button button START PAUSE button and indicator light DRYING button zO press to decrease or exclude drying the selected drying level or time will appear on the display see How to run a wash cycle or a drying cycle START PAUSE D button and indicator light when the blue indicator light flashes slowly press the button to start a wash cycle Once the cycle has begun the indicator light will remain lit in a fixed manner To pause the wash cycle press the button again the indicator light will flash in an amber colour If the amp symbol is not illuminated the door may be opened To start the wash cycle from the point at which it was interrupted press the button again DOOR LOCKED indicator light The lit symbol indicates that the door is locked To prevent any damage wait until the symbol turns off before opening the d
15. action and water average time of a standard cycle usage of a liquid detergent The Cool Wash function saves energy by not heating the water used to wash your laundry an advantage both to the environment and to your energy Dill optimisation ensure great wash results in the same For the best washing results we recommend the Easy iron By selecting this function the wash and spin cycles will be modified in order to reduce the formation of creases At the end of the cycle the washer dryer will perform slow rotations of the drum while the EASY IRON and START PAUSE indicator lights will flash blue and orange respectively To end lt cannot be used in conjunction with wash cycles 6 7 8 9 10 11 12 13 amp Delayed start To set a delayed start for the selected cycle press the corresponding button repeatedly until the required delay period has been reached When this option is enabled the corresponding indicator light will remain lit To the cycle press the START PAUSE button or the EASY IRON button For wash cycles number 8 the machine will end the cycle while the laundry is soaking the EASY IRON and START PAUSE indicator lights will flash To drain the water so that the laundry may be removed press the START PAUSE button or the EASY IRON button It cannot be used in conjunction with wash cycles 7 10 11 12 13 amp the text OFF appears on the display remove the delayed start setting
16. e and or the duration of the cycle 7 START THE WASH CYCLE Press the START PAUSE button The corresponding indicator light will turn blue remaining lit in a fixed manner and the door will be locked the DOOR LOCKED 4 symbol will be lit To change a wash cycle while it is in progress pause the washer dryer using the START PAUSE button the START PAUSE indicator light will flash slowly in an amber colour then select the desired cycle and press the START PAUSE button again To open the door while a cycle is in progress press the START PAUSE button if the DOOR LOCKED amp symbol is switched off the door may be opened Press the START PAUSE button again to restart the wash cycle from the point at which it was interrupted 8 THE END OF THE WASH CYCLE This will be indicated by the text END on the display when the DOOR LOCKED amp symbol switches off the door may be opened Open the door unload the laundry and switch off the machine If you wish to cancel a cycle which has already begun press and hold the button The cycle will be stopped and the machine will switch off Wash cycles and options 1 inbesit Table of programmes and wash cycles For all Test Institutes 1 Test wash cycle in compliance with regulation EN 50229 select wash cycle 1 with a temperature of 60 C 2 Long wash cycle for cottons select wash cycle 1 with a temperature of 40 3 Short wash cycle for cottons select wa
17. lectrical and Electronic Equipment WEEE states that household appliances should not be disposed of using the normal solid urban waste cycle Exhausted appliances should be collected separately in order to Do not dry unwashed items in the tumble dryer ltems that have been soiled with substances such as cooking oil acetone alcohol petrol kerosene spot removers turpentine waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer Items such as foam rubber latex foam shower caps waterproof textiles rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer Fabric softeners or similar products should be used as specified by the fabric softener instructions The final part of a tumble dryer cycle occurs without heat cool down cycle to ensure that the items are left at a temperature that ensures that the items will not be damaged WARNING Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated e This appliance was designed for domestic use only Do not touch the machine when barefoot or with wet or damp hands or feet Do not pull on the power supply cable when unplugging the appliance from the electricity socket Hold the plug and pull Do not open the detergent dispenser drawer while the machine is in operation
18. ne Water connections maximum pressure 1 MPa 10 bar minimum pressure 0 05 MPa 0 5 bar drum capacity 62 litres Spin speed up to 1400 rotations per minute Energy rated programmes according to regulation EN 50229 Wash programme 1 temperature 60 C using a load of 8 kg Drying first drying cycle performed with a 2 kg load by selecting the drying level A1 IRON Second drying cycle performed with a 6 kg load selecting the maximum drying level A4 EXTRA This appliance conforms to the following EC Directives 89 336 EEC dated 03 05 89 Electromagnetic Compatibility and subsequent modifications 2006 95 EC Low Voltage 2002 96 EC 1 inpes T Description of the washer dryer aB Control panel OPTION DOOR ON OFF TEMPERATURE buttons and indicator lights LOCKED button button QO WASH CYCLE SELECTOR KNOB Detergent dispenser drawer Detergent dispenser drawer used to dispense detergents and washing additives see Detergents and laundry ON OFF button press this briefly to switch the machine on or off The START PAUSE indicator light which flashes slowly in a blue colour shows that the machine is switched on To switch off the washer dryer during the wash cycle press and hold the button for approximately 3 seconds if the button is pressed briefly or accidentally the machine will not switch off If the machine is switched off during
19. of Ireland 01 230 0233 Free Helpdesk Service We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership Simply call our Indesit Service Hotline on 08448 224 224 Republic of ireland 0818 313 413 for telephone assistance or where necessary to arrange for an engineer to call 15 195080034 00 07 2009 Xerox Fabriano After Sales Service No one is better placed to care for your Indesit appliance during the course of its working life than us the manufacturer Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast reliable local service UK 08448 224 224 Republic of Ireland 0818 313 413 www indesitservice co uk Please note Our advisors will require the following information Parts and Accessories We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life UK 08448 225 225 Republic of Ireland 0818 313 413 www indesitservice co uk Appliance Registration We want to give you additional benefits of Indesit ownership To activate your free 5 year parts guarantee you must register your appliance with
20. oor To open the door while a cycle is in progress press the START PAUSE button if the DOOR LOCKED symbol is switched off the door may be opened Standby mode This washer dryer in compliance with new energy saving regulations is fitted with an automatic standby system which is enabled after a few minutes if no activity is detected Press the ON OFF button briefly and wait for the machine to start up again 1 inpesit Display _ are LILI rpm The display is useful when programming the machine and provides a great deal of information The duration of the available wash cycles and the remaining time of a running cycle appear in section A if the DELAYED START option has been set the countdown to the start of the selected wash cycle will appear Furthermore pressing the corresponding button allows you to view the maximum temperature spin speed and drying level or time values attained by the machine during the selected cycle The hour glass flashes while the machine is processing data depending on the wash cycle and Smart level selected After a maximum of 10 minutes the hour glass icon remains lit in a fixed manner and the final amount of time remaining is displayed The hour glass icon will then switch off approximately 1 minute after the final amount of time remaining has appeared The phases scheduled for the selected cycle and once the cycle has begun the current phase of the wash cycle and drying cycle
21. press the button until This option can be used in conjunction with all cycles Detergents and laundry Detergent dispenser drawer Successful washing results also depend on the correct dose of detergent adding too much detergent will not necessarily result in a more efficient wash and may in fact cause build up on the inside of your appliance and contribute to environmental pollution Do not use hand washing detergents they create too much foam Open the detergent dispenser drawer and pour in the detergent or washing additive as follows Compartment A Washing detergent powder or liquid Liquid detergent should only be poured in immediately prior to the start of the wash cycle Compartment B Additives fabric softeners etc The fabric softener should not overflow the grid extra compartment C we recommend this compartment is used for liquid detergent Preparing the laundry e Divide the laundry according to the type of fabric the symbol on the label the colours separate coloured garments from whites e Empty all garment pockets and check the buttons e Do not exceed the listed values which refer to the weight of the laundry when dry Durable fabrics max 8 kg synthetic fabrics max 3 5 kg Delicate fabrics max 2 kg Wool max 2 kg Silk max 2 kg How much does your laundry weigh 1 sheet 400 500 g 1 pillow case 150 200 g 1 tablecloth 400 500 g 1 bathrobe 900 1 200 g 1 towel 150 250 g
22. re any maintenance Sometimes small items Such as coins or buttons may fall into the protective pre chamber at the base of the pump Make sure the wash cycle has finished and unplug the appliance To access the pre chamber 1 Take off the cover panel on the front of the machine by first pressing it in the centre and then pushing downwards on both sides until you can remove it see figures 12 2 Unscrew the lid by rotating it anti clockwise see figure a little water may trickle out This is perfectly normal 3 Clean the inside thoroughly 4 Screw the lid back on 5 Reposition the panel making sure the hooks are securely in place before you push it onto the appliance Checking the water inlet hose Check the inlet hose at least once a year If there are any cracks it should be replaced immediately during the wash cycles water pressure is very strong and a cracked hose could easily split open T Never use second hand hoses Troubleshooting 1 inpbesit bh Your washer dryer could occasionally fail to work Before contacting the Technical Assistance Service see Service make sure that the problem cannot be not solved easily using the following list Problem Possible causes Solutions The washer dryer does not e The appliance is not plugged into the socket fully or not enough to make switch on contact e There is no power in the house The wash cycle does not start he
23. sh cycle 3 with a temperature of 40 Wash options SMART c92 Description of the wash cycle Max ax p Max Cycle m temp speed Fabric load duration o C rpm Drying softener kg Smart cycles whites whites and resistant colours o whites and delicate colours i TADY A resistant colours o whites and delicate colours is lt O DE ee O A E E ee S N S Special cycles D Wool for wool cashmere etc Ca ee ee ee ae ee gt soo e o viscose lingerie x Duvet for down stuffed garments 1000 J o palrs Dry cycles a 1 La ee el e e EER 12 Synthetics e e foe e J fe 8 13 Pra gatgg7 _1_ _ __ _ _ __l____t a Partial cycles u spin 1400 ptf l o Note If you also want to run the drying cycle this option The SMART option optimises washing to suit the quantity is enabled only if combined with level A1 Iron dry of laundry loaded into the machine thereby reducing the a AS Cool Wash overall wash cycle duration while minimising water and energy consumption Press the SMART button to select the type of wash cycle desired Intense vigorous wash cycle for garments with a heavy soil level Perform standard wash cycle for garments with a normal soil level Fast quick wash cycle for garments with a light soil level This may only be used in conjunction with wash cycles 1 2 3 4 all three levels and 5 6 Perform and Fast levels Instead intensified wash
24. sive vibrations before every spin and to distribute the load in a uniform manner the drum rotates continuously at a speed which is slightly greater than the washing rotation speed If after several attempts the load is not balanced correctly the machine spins at a reduced spin speed If the load is excessively unbalanced the washer dryer performs the distribution process instead of spinning To encourage improved load distribution and balance we recommend small and large garments are mixed in the load Precautions and tips This washer dryer was designed and constructed in accordance with international safety regulations The following information is provided for safety reasons and must therefore be read carefully General safety This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 1 inbesit e Do not use the appliance to dry foam rubber or similar elastomers e Make sure that the water tap is turned on during the drying cycles Disposal e Disposing of the packaging materials observe local regulations so that the packaging may be re used e The European Directive 2002 96 EC relating to Waste E
25. ternative plug The wires in this mains lead are coloured in accordance with the following code BLUE NEUTRAL N BROWN LIVE L GREEN amp YELLOW EARTH E Disposing of the appliance When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above GREEN amp YELLOW gt CROSS BAR CORD GRIP BLUE The washing machine should not be installed in an outdoor environment not even when the area is sheltered because it may be very dangerous to leave it exposed to rain and thunderstorms When the washing machine is installed the mains socket must be within easy reach Do not use extensions or multiple sockets The power supply cable must never be bent or dangerously compressed t The power supply cable must only be replaced by an authorised serviceman Warning The company denies all liability if and when these norms are not respected The first wash cycle Once the appliance has been installed and before you use it for the first time run a wash cycle with detergent and no laundry setting the 90 C programme without a pre wash cycle Technical data Model PWDE 8148 W width 59 5 cm Dimensions height 85 cm depth 62 cm from 1to 8 kg for wash programme Gapacity from 1 to 6 kg for the drying programme Electrical please refer to the technical data connections plate fixed to the machi
26. therwise interfered with by any person not authorised by us Any repair work must be undertaken by us or our appointed agent Any parts removed during repair work or any appliance that is replaced become our property The appliance is used in the United Kingdom or Republic of Ireland The guarantee does not cover Damage resulting from transportation improper use neglect or interference or as a result of improper installation Replacement of any consumable item or accessory These include but are not limited to plugs cables batteries light bulbs fluorescent tubes and starters covers and filters Replacement of any removable parts made of glass or plastic THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON DOMESTIC PREMISES 5 Year Parts Guarantee Indesit also offers you a free 5 year parts guarantee This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers There will be a charge for our engineer s time To activate the extra parts warranty on your appliance simply call our registration line on 08448 24 24 24 Republic of Ireland 01 230 0800 Extended Guarantees We offer a selection of repair protection plans that enable you to fully cover yourself against the expense of repair bills for the life of your policy To find the ideal plan for you please call our advice line on 08448 226 226 Republic
27. us UK 08448 24 24 24 Republic of Ireland 01 230 0800 www indesitservice co uk Indesit Company UK Ltd Morley Way Peterborough PE2 9JB Indesit Company Unit 49 Airways Industrial Estate Dublin 17 LP D Recycling amp Disposal Information As part of Indesit s continued commitment to helping the environment Indesit reserves the right to use quality recycled components to keep down customer costs and minimise material wastage Please dispose of packaging and old appliances carefully To minimise the risk of injury to children remove the door plug and cut the mains cable off flush with the appliance Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket and the door cannot be locked shut 16
28. washer dryer door is not closed properly e The ON OFF button has not been pressed e The START PAUSE button has not been pressed e The water tao has not been opened e A delayed start has been set The washer dryer does not fill e he water inlet hose is not connected to the tap with water the text H20 e The hose is bent flashes on the display e The water tao has not been opened e There is no water supply in the house e The pressure is too low e The START PAUSE button has not been pressed The washer dryer continuously he drain hose is not fitted at a height between 65 and 100 cm from the floor takes in and drains water see Installation e The free end of the hose is under water see Installation e The wall drainage system is not fitted with a breather pipe If the problem persists even after these checks turn off the water tap switch the appliance off and contact the Technical Assistance Service If the dwelling is on one of the upper floors of a building there may be problems relating to water drainage causing the washer dryer to fill with water and drain continuously Special anti draining valves are available in shops and help to prevent this inconvenience The washer dryer does not e The wash cycle does not include draining some cycles require the draining drain or spin process to be enabled manually e The EASY IRON option is enabled To complete the wash cycle press the START PAUSE button see
Download Pdf Manuals
Related Search