Home

Kathrein UFS 900

1. b r 1 AJ w 11 III III a edited press the eo red dot button The following on screen display appears see screenshots on the right Delete Deleted recordings are irrevocably deleted and can only be restored by re recording the programme Use the A lv buttons to select Delete and confirm your selection with the button The selected recording s will be deleted Recording Archive Playing Back Editing Recordings Rename Use the v buttons to select Rename and confirm your selection with the button You can now rename your selected recording The following display appears see example screenshot on the right Alphanumeric characters are input as described in Technical Appendix Alphanumeric entries Confirm the name you have input by pressing the button Media centre General multimedia information UFS 900 In addition to the recording functionality the receiver offers the following multimedia functions O MP3 playback O JPEG display O Playback of external recordings UFS 940 912 910 904 903 902 822 821 The data to be played back must be on a USB storage medium connected to the receiver Press the fuon button to call up the media centre The following on screen display appears example Mediacenter The receiver can read only USB storage media that are formatted either as FAT32 or EXT2 Selecting a partition If you h
2. First installation Main Menu Service Menu After calling up the menu you will see the following on screen display Factory Reset Use the allv buttons to select the desired menu and confirm your selection using the button Under the USB Device Management selection the following additional information is displayed Operating software version currently in use on the receiver Hardware version of the receiver Date of the last update of the receiver operating software Date of the last update of the channel list Software update After calling up the menu you will see the following on screen display Software Update over USB Use the Av buttons to select the desired menu and confirm your selection using the button Software update via SAT After calling up the menu you will first see the following display All available s modules l components for your The loading process can take receiver will be loaded up to 60 minutes and then displayed Main Menu Service Menu Use the Lally buttons to select the parameters to be updated during the update procedure Show infotext Press the button to display the info text for the available downloads These indicate the main features of the new operating software based on which you can decide whether you want to install the new software on your receiver Update software Select Yes here if you want to install new softw
3. ap WE Be is a F 3 _ E k e i Available rewind speeds 2 3 and 4 times Each time the rewind button is pressed the rewind speed increases another step Pressing the fast forward button reduces the rewind speed step by step Press the Play button to return to the normal playback speed Cancels playback and displays the Media Centre Media Centre display playback continues in preview window Press it again to restart full screen mode Show hide playback info banner Main Menu Calling up the main menu and introduction The main menu is called up by pressing the button The following on screen display appears The programme showing on the currently Mainmenu selected channel always appears in the top right hand corner of the main menu The selected menus sub menus and items as well as the parameters to be set are each marked in colour DE Always check the bar at the bottom of the on screen display This provides information on what to do next The sub menus are selected using the Lalty buttons and called up using the button Use the Lalty buttons also to select the sub menu items The settings of the various parameters in the individual items are made using the SG buttons or the number pad The main menu and sub menus can be exited step by step using the button Press the button to return directly from one of the menus to the TV picture UO
4. disk via the USB port at the rear of the receiver and set it up as described in the section Mainmenu Service USB Device Management Press the ba button to open the Programme Guide Press the p lt e button to select a channel a Press ae to select the desired programme Press the o red dot button to open the Record window Press to start recording the programme or a Press r to change the recording mode date start end and duration before recording Press or ber to return to TV 36 2 Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Basic Functions want to play back a recording To make a recording and then play it back using the UFS 900sw you must connect an external hard disk via the USB port at the rear of the receiver and set it up as described in the section Mainmenu Service USB Device Management Press or er to open the recording archive a Press ae to select a recording Press twice to start playback and exit the recording archive Press aa during playback to wind forward and rewind Press E to return to normal playback speed Press EB to pause playback Presse to cancel playback and return to the recording archive Press cx to exit the recording archive and return to normal live TV Tested only with hard disks fr
5. Parental Control Main Menu SettingS cccccssssseeseeees First installation ccccccccseceeeeeeeeeeeeeees TV video ANd audio 2422244 4er Suit screen MENU eeeeanennenennnnnnennenenne nenn Date and Te Common Interface O Antenna Configuration s 224e4 no Main Menu Service Menu Software update 22002220002enenenenneen Software update via SAT uueneenenneeenenn Software update over USB u 0 Restore factory settings 2 u0s02222200 00 USB Device Managemert Formatting deleting urs000442 Henn Creating a dedicated hard disk archive hard Na 65 65 66 67 67 Main Menu LanguagG cc sccccsseeeeeees 91 Operation without the remote control 92 Backup operation c cccccsseecseseceeeeeeees 92 Troubleshooting ccccccceeseeeseeeeeeeseeeeeeees 93 Technical appendix u 24s0220202n0nn2nn 94 Alphanumeric entries u00244 94 Advanced connection example 95 Technical Specifications 96 Sat IF connection examples 97 Single systems a an 97 Community antenna network systems FAX Sal een 97 Community antenna network systems 8 x Sat IF multi feed 220u
6. Recording settings programming the timer The o red dot button allows you to set a programme for recording at any time The programme to be recorded can be selected in any of the EPG views provided the o red dot button appears at the bottom of the on screen display Programme in the EPG Select the desired programme and press the o red dot button The following on screen display appears see example screenshot on the right Use the lt gt buttons to select the desired recording mode The following recording mode options are available Once The recording will be performed once Daily The recording will be performed daily at the time you specify Weekly The recording will be performed once a week on the same day and at the same time a Use the cursor buttons a to select the further items and use the number pad to make the settings When all settings have been made press the button to save the recording settings You can view the scheduled recordings in the plan recording view of the EPG see Timer list section Electronic Programme Guide EPG Programme not in EPG Select any programme on the channel on which the desired programme is to be broadcast at a later date and press the o red dot button The following on screen display appears example As there is no EPG data you must enter the data date start end manually a Enter the data using the cursor buttons
7. XY DOLBY Manufactured under licence from Dolby Laboratories Dolby and the DIGITAL double D symbol are registered trademarks of Dolby Laboratories 1 HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE i Connection and setup Scope of supply m UFS 900sw m Power supply unit 230 V 12 V m Remote control RC 671 m Operating Manual m HDMI cable m Safety instructions multi lingual m 2 batteries AAA 1 5 V Inserting batteries into the remote control Remove the cover on the rear of the remote control Insert the two batteries supplied into the remote control Ensure correct polarity of the batteries the and markings as indicated inside the battery compartment Slide the cover back onto the housing until it locks in place Connection and setup Front rear view of the receiver 8888 8 13 14 KATHREIN OK O ji sensor wW VIDEO 950 2150MHz DATA 1 0 ION 4000A nex COMMON INTERFACE um a ee 068 DIF AUDIO POWER 5 6 19 10 11 12 15 1 On Off switch 10 Data interface only for service optionally 2 Channel selection P for an infrared sensor not included 11 Scart socket for TV connection 3 4 character display 12 Digital data stream output S PDIF Sony SHANG u ie Philips Digital Interface Format for Dolby 5 _RF IF loop through ou
8. f or the number pad In addition you can also change the duration of the recording The receiver automatically adjusts the end time for the recording to the duration you have selected Press the button to save your settings Recording once Use the lt gt buttons to select the once recording mode see screenshot on the right Use the a v buttons to switch to the Date field and use the lt gt buttons to select the desired recording day Then use the Allv buttons to switch to the selection field Start and use the lt gt buttons or the number pad to select the desired recording start time Then use the Lalty buttons to switch to the selection field End and use the lt gt buttons or the number pad to select the desired recording end time In the next line you can also change the duration of the recording The receiver automatically adjusts the end time for the recording to the duration you have selected When all settings have been made press the button to save the recording settings Electronic Programme Guide EPG Recording daily Use the gt buttons to select the daily recording mode see screenshot on the right Then use the lv buttons to switch to the selection field Start and use the gt buttons or the number pad to select the desired recording start time Then use the Lalty buttons to switch to the selection
9. Press the DE buttons to switch between the sort criteria Recording Archive mered Gy dare ka m4 T d E E Recording Archive Playing Back Editing Recordings Playing back a recording Use the Lalty buttons to select the desired recording Confirm selection of the desired recording by pressing the button Pressing the button again exits the recording archive and allows the desired recording to be viewed in full screen mode Playback functions During playback of a recording you have the following options This stops playback playback can be resumed either by pressing the pause Pause button i button again or by pressing the play button This displays the playback info with elapsed and remaining fee Beton ix times and the channel info plus title genre etc for the recorded programme see screenshot on the next page To hide the playback info again press the i button twice This displays the info text recorded with the programme To hide the info text again press the i button again Available fast forward speeds 2 4 8 10 and 20 times Each time the fast forward button is pressed the fast forward speed increases another step Pressing the rewind button reduces the fast forward speed step by step Press the Play button to return to the normal playback speed Fast forward button Available rewind speeds 2 4 8 10 and 20 times Each time the rewind button is pressed the rewind speed increas
10. to switch channels Press a to display and hide additional channel information Press to mute the sound 9 Press A Ms to enter the channel number directly Press to call up the channel list id iddi a Q gt Press to select a channel PEE EEE it Mines gl C Me Cepia pe ET E71 TV pA ce ne peomrm i ee ar i Press twice to call up a channel and close the channel list Basic Functions want to listen to the radio TVIR TVR Press MJ blue to change to radio mode Press to increase and decrease the volume Press S to switch channels Press a to display and hide additional channel information Press to mute the sound 9 Press og we to enter the channel number directly Press to call up the channel list ECET a Ql gt Press 9 to select a channel Co mam OOOO i _______ jew id 1 oooO O uini o iei O G i Press twice to call up a channel and close the channel list TVR Press J blue to change back to TV mode Basic Functions want to see teletext Press to call up teletext 9 Press com weg to enter the required page directly or Press lalf to page forward backward TEXT Press or ec to return to TV ee ha Basic Functions want to watch timeshift TV To watch timeshift TV using the UFS 900sw you must connect an external hard disk via the USB port at the rear
11. Miscellaneous Ambient temperature C Max 5 to 40 Unit dimensions W x H x D mm 255 x 47 x 190 Weight kg lt 2 8 Technical appendix Sat IF connection examples Single systems YI PEL gt ESD ESC epeen sat a amp EN Sat IF wing fel 950 2150 MHz Ei Community antenna network systems 4 x Sat IF f z J ax A Eye ESD ESC Sat IF 950 2150 MHz 5 h y lt ESD ESC KAZ 11 KAZ 12 overvoltage protector Technical appendix Community antenna network systems 8 x Sat IF multi feed Sat IF 950 2150 MHz ESD ESC T Community antenna network systems 16 x Sat IF multi feed ESD JESC j ar i fe EIFILIITITITTI ml i ei u Sat IF F 80 2150 MHz Ca is Sat IF 950 2150 MHz 8 KAZ 11 KAZ 12 overvoltage protector Technical appendix Single cable systems D WFS 23 5 ESU 33 9 ESU 33 es ESU 33 ee ESU 33 ERA 14 ERA 14 T Single ESU 3 pn Fr Single ESU 33 4 S ERA 14 F gt gt Twin Singh ts st ESU33 _ ESU 33 eee UAS 584 585 a l Twin Single Br ESU33 TEEN ESU3 Sat IF 950 2150 MHz Single EE Single fac ESU 33 ae i am Fr Single Single m JESU 33 SE ms os bia a mE 4 connections per living unit KAZ 11 KAZ 12 overvoltage protector 99 Technical a
12. TV provider and the instructions supplied with the smart card and the CA module Smart cards and CA modules are not included with this product The cards and modules are issued by the respective pay TV providers and contain the subscriber data and details of the channels for which the subscriber has paid These channels are always scrambled Contact the Pay TV provider if you are interested in subscribing to a particular Pay TV channel You are responsible for the use of the smart card in the CA The smart card sold by the Pay TV provider specific to a particular encryption technology is inserted into the CA module Store your card and PIN code securely when not in use Inserting the smart card and the CA module Ce RE EONA 950 2150MHz C ee COMMON INTERFACE IF OUTPUT IF INPUT 5V uae max Homi Inserting the CA module into the Cl The Common Interface Cl 2 of the UFS 900sw is suitable for insertion of a CA Conditional Access module and is located at the rear of the receiver The CA module 2 holds the smart card O chip contacts pointing downwards and towards socket strip and is then inserted in the CI slot 3 The smart card should be inserted into the CA module without exerting excessive force This also applies to inserting the CA module into the Cl slot Do not use a excessive force and follow the instructions supplied with the smart card and the CA module To remove the CA modul
13. Up First installation TV video and audio After calling up the menu you will see the following on screen display TV Video and Audio j Le The individual items are selected using Audio Format via HOMI the allv buttons The changes to stretched Fullscreen the current settings can be made using the Pb buttons or the number pad a Use the O buttons here to select the settings for your TV set When doing this refer to the operating instructions for your TV set Video output via Select here the connection on the receiver to which you have connected your television Either HDMI or SCART TY Video and Audi TY Video and Audio G HOMI Format 1089 TV aspect ratio 18 9 u Audio Format via HOMI Decoded PCM Picture format automatically Show 4 3 event stretched Fullscreen T SCART Outp FBAS Television system PAL Main Menu Settings HDMI Format Here you can select the video resolution that will be sent to your TV set Either 1080i resolution 1920 x 1080 half screen images 576p resolution 720 x 576 full screen images or 720p resolution 1280 x 720 full screen images Automatic Audio Format via HDMI Here you can select the type of audio signal that is transmitted by the HDMI interface Select the signal that your TV set can process Decoded PCM or S PDIF format Show 4 3 event Here you can select the type of screen display mode for 4 3 b
14. Use the Allv buttons to select Lock and confirm your selection with the button To lock the channel you must now enter your four digit PIN code factory setting 0000 The following on screen display appears see example screenshot on the right The locked channel is now displayed in the channel list with a padlock on the right hand side and can in future be viewed only by entering the four digit PIN code factory setting 0000 This function can be cancelled using the edit menu select Unlock Add to favourites list After selection of the channel s to be edited press the o red dot button Use the la i buttons to select To Favorite Now use the gt buttons to select the desired favourites list see example screenshot on the right into which the channel should be copied Confirm your selection with the button The highlighted channel is copied into your selected favourites list 208 210 ai MORAENHALT 2222 PAEQNORFSSH Ss 214 215 ss WDR Aachen O O O O O O O O O U O O i T Zug or tes a a ae a edit IV Channelllst Bir DE ZI NOR FSHH ooo 216 J WDR Aachen PP Main Menu Edit Channel List Start Blockselection Press the oe red dot button GOD Ch eiri Daystar Tel r on vet vor z ae oooO Use the lal buttons to select rir France 24 ten Francais Start Blockselection and confirm your AL TV5MONDE OS O selection with the button You c
15. and the peripheral satellite components slaves such as LNBs multi switches rotating antenna systems It is a single master multi slave system i e there is only ever one master in the satellite system All activities start from the master DiSEqC components If DISEGC switching matrices are cascaded the master receiver must transmit the DiSEqC signal several times so that all DISEqCT multi switches in the cascade receive their commands These days DiSEqC components slaves must be downward compatible i e respond to the analogue switching criteria from receivers that are only equipped with H V and 22 kHz control signals A DiSEqC switching matrix will work with analogue switching criteria until the DiSEqC command from the master is received All analogue switching criteria are then ignored Dolby Digital 5 1 Dolby Digital is a sound transmission that allows digital surround sound to be output on a home cinema system DVB Digital Video Broadcasting DVB S refers to the transmission method S satellite C cable T terrestrial DVB S2 An enhanced DVB S signal for HDTV with better quality EUTELSAT European Satellite operator based in Paris Many orbit positions and European customers Transponders in the frequency range 10 7 12 75 GHz FAT and FAT32 File systems for storage media FEC FEC is the abbreviation for Forward Error Correction A technique for reducing the error rate
16. can be made using the lt gt buttons or the number pad Press the button to access the menu generated by the CA module Main Menu Settings Aa a ma nen setings From this menu your card and your PIN code allow you to access various channels from your Pay TV provider CryptoWorks has been selected as an example here The details can be different for each CA module Always follow the instructions supplied by your Pay TV provider Note The module on screen displays may be shown in English even if you have selected German as the menu language because the menu is generated directly by the module Information for Conax SECA Viaccess and CryptoWorks users Note that with monthly activation intervals the channel providers have different procedures for activating pay TV cards Activation may therefore be a few days before or after the beginning of a new month During this activation period the CA module and card must be in the slot and the receiver must be turned on and set to the booked Pay TV channel Follow the instructions from the Pay TV provider If your Pay TV card is then still not enabled we recommend you briefly withdraw the CA module with the card out of the slot with the receiver switched on and then re insert it This information has nothing to do with the properties of the receiver it is merely intended to assist you Antenna Configuration See the section Connection and Set Up
17. category Contains the following channel lists Favoriteslists 1 8 i green button Call up the Complete List category rra 206 a rmome Contains the following channel lists megane plus Complete list O ar Channel lists sorted by satellite 6 NDR FS 5H OPT yellow button Call up the alphabetically sorted lists ESF 165 Contains the following channel lists N n AZ Z A era oo teenemte 0 9 ad Ereuna Mensen Ei Er Ordered by individual letters Channel list selection Use the Et buttons to scroll through the currently available channel lists Select the channel After selecting the desired channel list 61 the desired channel is selected using E in ian A a the cursor a buttons and called up using the button To exit the channel list and return to the TV picture press the button again or press the button Basic Functions Channel Information Channel information is shown for a few seconds each time the channel is changed this can be changed under Settings User Defined Settings Customize Screen Menu or displayed continuously by pressing the a button Selected Channel slot in the DVB subtitles favourites list selected channel favourites list and channel name J Programme broadcast in HDTV ii 7 NV Current time Indication of the selected soundtrack Start time for the Current programme
18. field End and use the SG buttons or the number pad to select the desired recording end time In the next line you can also change the duration of the recording The receiver automatically adjusts the end time for the recording to the duration you have selected When all settings have been made press the button to save the recording settings Recording weekly Remember that the day of the week for the desired programme is loaded in the recording schedule and you can make no further manual corrections to it Therefore before press ing the button select the programme on the day of the week that you will want to make the weekly recording in future Use the lt gt buttons to select the weekly recording mode see screenshot above Then use the Lalty buttons to switch to the selection field Start and use the lt gt buttons or the number pad to select the desired recording start time Then use the Lalty buttons to switch to the selection field Electronic Programme Guide EPG End and use the lt gt buttons or the number pad to select the desired recording end time In the next line you can also change the duration of the recording The receiver automatically adjusts the end time for the recording to the duration you have selected When all settings have been made press the button to save the recording settings Timer list The Timer list view can be called up at any
19. of data transmission Additional bits are inserted into the data stream so that error correction algorithms can be used on reception The FEC error rate corresponds to the Viterbi rate GNU GNU is not Unix it is an open operating system for software developers 101 Short technical guide HD Ready This is a label created by the EICTA European Information Communications and Consumer Electronics Industry Technology Association for equipment that is capable of reproducing HDTV HDCP High bandwidth Digital Content Protection Encryption system which protects the HDMI and DVI interfaces for secure transmission of video and audio data HDMI High Definition Multimedia Interface Digital interface for digital video and audio data transmission between TV and receiver preferred for HDTV HDTV High Definition Television High resolution television with a resolution up to 5 times higher or finer than PAL or NTSC High band Satellite frequency range between 11 7 GHz and 12 75 GHz H 264 Another designation for MPEG 4 JPEG Joint Photographic Experts Group Image compression technique Linux Operating system LNB Low Noise Block Converter Converts the satellite downlink frequencies into the Sat IF Low band Satellite frequency range between 10 7 GHz and 11 7 GHz MP3 File format for compressed audio files MPEG 2 MPEG is the abbreviation for Moving Picture Experts Group a worki
20. the timeshift function are sufficient in the normal case Once you have performed all the settings press the Lally buttons to switch to the Format archive hard disk line and press the button to confirm Answer the security question All data on the USB data carrier will be deleted do you want to continue by now pressing the button The hard disk setup now starts Depending on the capacity of the USB storage medium in question this process can take several minutes As soon as the setup process is complete the receiver automatically performs a reboot You can now use the Recording and Timeshift functions Main Menu Language After calling up the menu you will see Mainmenu the following on screen display Use the Lalty buttons to select the desired menu language and confirm your selection using the button The following languages are available for selection German English French Italian Spanish Czech Dutch and Turkish Operation without the remote control If you have misplaced your remote control or if the batteries are flat you can still operate your receiver to a limited extent from the front panel Backup operation On Off switch BEE 777 EEE ne nn se ESSEN There are four buttons on the front of the receiver On Off switch This switch allows you to switch the receiver on and off again Channel down The channel down button switches to
21. this transmission frequency unless the PIN is entered Select the setting Yes You then have the facility of using the number keys to input a PIN code 0 255 in the line beneath Password PIN Test connection Press the button to test the connection The following on screen display appears Registration was successful OK Press the button to confirm the displayed message Then press the u button to return to the Antenna Configuration menu Now press the O green button The receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section Press the button to confirm the displayed message If no connection can be established to the single cable system check your settings transmission channel and if necessary call for expert help Connection and setup Channel Search The individual items are selected using the Lalty buttons Changes to the current settings can be made using the SG buttons If you do not wish to perform a channel search press the O green button and continue with the Date and time section of the first installation If you want to perform a channel search use the lt gt buttons to select Yes Channel Search Mode Use the lt gt buttons to select the type of channels that are to be searched for You have three options free and scrambled All channels are searc
22. to scroll backwards and forwards a day at a time Using the o red dot button you can copy the selected programme to the recording settings see the Recording settings section Electronic Programme Guide EPG Current View The Current view can be called up at any time in EPG by pressing the O green button In the Current view you can see all channels displayed in the order of the overall channel list Provided that EPG data has been supplied by the channel provider the receiver shows for each channel the current program being shown with start time finish time and progress bar a You can use the cursor ae buttons to select the desired programme and if available you can use the i button to call up further information on the desired programme If you wish to view the programme currently being shown on a channel you need not exit the EPG just select the desired channel At the top right of the screen you will see the current TV picture for the selected channel The button allows you to look ahead in 15 minute steps to future programmes on the channels press the E button to return to the current time Timer list view The Timer list can be called up at any time in EPG by pressing the a red button You will find a detailed explanation of the timer list in this section under the item Recording settings Timer list Electronic Programme Guide EPG
23. 4000022 2 nen 98 Community antenna network systems 16 x Sat IF multi feed 22uu00002222 Henn 98 Single cable systems 242400s0402e nennen 99 Short technical guide uzuurrmns nero 101 SEIVICO anna E een EEE ER 104 For your notes 4 105 5 Safety Instructions Important Notes These two pages contain important information about operation installation location and connection of the unit Read these instructions carefully before setting up the unit Danger Warning Mains cable Make sure that the mains cable power supply cable is not damaged Units with a damaged mains cable must be disconnected from the mains unplugged at the mains power socket and repaired by an electrical specialist before being used Only use the power pack supplied if available Risk of fatal injury due to electric shock Cleaning Disconnect the mains plug before cleaning the unit Only use a dry cloth for cleaning and only clean the outer surface Never open the casing of the unit Touching the parts inside the unit carries a risk of death due to electric shock Playing children Make sure that children do not push any objects into the ventilation slots Risk of fatal injury due to electric shock Earthing The antenna system must be earthed as specified or equipoten tially bonded EN 60728 11 and any national regulations must be complied with Risk of voltage surges
24. C 1 0 system This type of system is preadjusted Confirm the rest of the on screen displays during the first installation using the O green button You cannot damage your reception system during this process If you do not receive a TV picture at the end of the first installation contact your specialist dealer You should perform the tuner configuration make changes yourself only if you are fully familiar with the particulars of your reception system You can set up the antenna tuner configuration for the following types of reception systems LNB only DISEqC 1 0 Single cable system Continue as described in the initial installation for the type of reception you have selected Connection and setup LNB only The individual items are selected using the Lally buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The following on screen display appears 11361MHz Select the satellite Use the CJ buttons here to select the satellite whose signal is present at the tuner LNB Type If your reception system does not have a Universal LNB use the j gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Single LNB Low Frequency You only need to specify this data if your LNB type is not Uni
25. LNB LNB Power This is factory set to On but must be changed of your LNB has its own power supply In most cases the LNB power supply is provided by the receiver Test transponder To check whether the settings that you have made are correct use the Lalty buttons to move to the Test transponder field Use the Pb buttons to select the required transponder from the various ones listed If your settings are correct you will see at the top right of the screen the live signal of a channel from the currently selected transponder If you do not receive a signal check your settings again and if necessary call for expert help You have now completed all settings for the first satellite Press the O green button to return to the Satellite Selection Menu and perform the settings in the same way for the remaining satellites When you have finished configuring the satellite press the O green button The receiver then automatically calls up the selection menu for the channel search Continue the first installation by selecting Execute Channel search LNB Low Noise Block converter feed system Connection and setup One Cable The individual items are selected using the Lally buttons If you require to access submenus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad g D Number of Satellites 1 gt Configure sate
26. NEIN BLJUOIY euu zuy 9IEJLISJU UOWWOY snye s as nap Ae ds q sw pue zeq juswo euey di 991A19S UUM nu w U9949S 9ZIWIOJSNI 991A0eg JSN yoieas jauueyy Main Menu s umas sipinw nue Bez y21e9S A1ojse peo Ipny p PIA AL jauueyy jenuew uonejjejsui Js l4 dN 149S pue UOIDBUUOD yoieas jouueyy U0199S OU 8as Iyewony uonrejje sul S414 ajepdp 31emyos Bumyas nuoW joljuoy sjauueUug SI7 JJuueyY9 o ben ue 9I1A1OS jejusledg y21ea9s yp UO WN fw SY Buissoeid Aq dn ed nusw ulep Menu overview Main Menu Edit Channel List All changes to the channel lists and favourites lists which you can make as described in the following section are not saved by the receiver unless when you exit the menu by pressing the button you answer Yes save changes to the question Save changes using the button If you give the answer No do not save the changes all the settings changes you made will be discarded and not saved Calling up the Edit Channel List menu Select the Edit Channel List menu using the button the ally buttons in the main menu and ox Selecting the channel list favourites list to be edited Now use the relevant coloured button to select the desired channel list category see the Basic operation and Channel selection from the channel list sections for details The following on screen display appears example Live picture f
27. Not assigned Guide Select Select l Programme Favoritelists options ieee Guide Channel OSD duration Use the lt gt buttons to select the time after which you want the on screen channel message display is automatically cancelled The selections available are Off 1 2 3 4 5 or 6 seconds Main Menu Settings Date and time After calling up the menu you will see the following on screen display Date and tim lt The individual items are selected using lv 06 59 Clock Tuesday 15 06 2010 the buttons The changes to Summertime the current settings can be made using the SG buttons or the number pad Local time offset GMT Here you can select the local time offset to UTC formerly GMT e g for Germany 1 hour You can set the offset in 1 hour steps The maximum offset is 12 hours and Automatic clock change Summer Time Here you can select whether the receiver should automatically change over to and from summer and winter time Either Onor Off If you select Off Summertime will be displayed in the line below Here you manually set the time of the receiver to summer time selection Yes If Summertime No is selected winter time is automatically selected Common Interface CI After calling up the menu you will see the following on screen display example The individual items are selected using the Lally buttons The changes to the current settings
28. Operating manual Englisch UFS 900sw HDTV Satellite receiver KATHREIN Antennen Electronic Preface Dear customer this operating manual is intended to help you make the fullest use of the extensive range of functions offered by your new satellite receiver We have tried to make the operating instructions as easy as possible to understand and to keep them as concise as possible To help you understand particular specialist terms that cannot be translated we have added a short glossary at the end ofthe manual The power switch is an environmentally friendly feature If you will not be using your receiver for an extended period you should use the power switch to disconnect it from the power supply and save energy For shorter breaks you can use the remote control to switch the receiver to standby which uses only a minimal amount of energy We wish you good reception and hope you will enjoy using your new HDTV receiver Your KATHREIN team Difference between PAL and HDTV The difference between PAL and HDTV High resolution TV is characterised by a significantly higher number of picture lines on the TV set The usual European standard PAL achieves a resolution of 576 lines vertically and 720 lines horizontally High resolution TV provides an impressive resolution up to five times higher than the usual PAL standard TV and hence delivering more detail sharpness and responsiveness A HDTV picture can contain up to five
29. Tea era 13 CUI VIEW ee 51 Timer NS VIEW ee 51 Audio conneclion 222022200220 ernennen 13 Recording settings programming the Didier 13 timer uueeeeeeeeeeeeeeeeeeeeeeenesnnnnnnnnnnnnnnnnnnnnnnenn 52 Auge a 2 13 Recording ONCE anen 53 First installation een 14 Recording daily euere 54 Common MENACE asnoisan 29 Recording Weekly ccceeccecceceeeesssseeeeeeees 54 Important INMOTNMANON ae 29 Timer list une ieen 55 Inserting the smart card and the CA module 29 Timer OVP 55 Basic FUNCtIONS cscceccsceseseeseeseeseeeees 30 Recording Archive Playing Back l Editing Recordings enneennsnnnen 56 Remote control for live operation TV Radio 30 Calling up the recording archive 96 want to watch TV cccceecesseeeeeeeeeeeeeees 31 Selection options remote control anbietet bernado 39 buttons in the recording archive 57 FE wantieiecedelsian 33 Sorting the recordings c ssssssesseseeees 57 Playing back 3 1 PEPE E 58 want to watch timeshift TV ana 34 aan Playback functions 22002220022en 58 want to record a programme een immediately uuuaanaaeenennenenennennnnnennennnnnnnn 35 Editing recordings nen 59 want to record a programme that iS DY er 59 scheduled for later timer list er 36 PING scone rincles sn canzectuenaraceaudasinceccneviweasassueiess 60 want to play back a r
30. ake sure your reception system is aligned to this satellite If you want to search several transponders on a satellite you should start an automatic search of the transmitting satellite Transponder Frequency Use the lt gt buttons transponder frequency already saved or the number pad transponder frequency not yet saved to select the transponder frequency on which the channel being sought is transmitted At the bottom right of the screen display the receiver shows the current signal strength and signal quality of the selected transponder The Polarisation and Symbol Rate options only need to be specified if the transponder has yet to be saved Polarization Press the lt gt buttons to select the correct polarisation horizontal or vertical Symbol Rate Use the number pad to enter the related symbol rate Main Menu Search Channels Channel Search Mode Use the SG buttons to select the type of channels that are to be searched for You have three options free and scrambled All channels are searched for only free Only free to air channels are searched for only scrambled Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant Pay TV provider Network search Use the lt gt buttons On Off to select whether a network search should be perfor
31. an now use the ally buttons to start EEE 1 EEE block selection in the previously selected channel This selects the channels in the sequence in which they appear in the previously selected channel list and applies a coloured background to them see example screenshot on the right Then press the o red dot button You can now carry out all the editing functions channel by channel individually for all the selected channels Select the desired action Move Delete Skip Lock or To Favorite using the Av buttons and confirm your selection with the button You can find an explanation of the individual edit options under Edit Channel List channel lists in this section Editing channels favourites lists After selection of the channel s to be edited press the o red dot button The following on screen display appears see screenshot on the right Remove from favoritelist Use the Lally buttons to select Remove from favoritelist and confirm your selection with the button The selected channel is deleted from the previously selected favourites list but not from the complete list Main Menu Edit Channel List Lock See Edit channels channel lists Lock Rename favoritelist A favourites list cannot be renamed unless it contains at least one channel assigned to it After selection of the channel s to be edited press the o red dot bu
32. annels Radio found channels found Radio Channel RADIOS ESP C DEPORTES NAT GEOGRAPH_ new BE PRTROVKA nem CANAL GOLF E PREUR 7575 nem Unknown ite BE PROLA ZAGRANICY ee Ct F TBOL tee f i ASTRA 19 2E 10921MHz Horizontal 22000MS s i HOTBIRD 13 0E 12399MHz Horizontal 27500MS s 131 131 Transponder frequency converter see Short Technical Guide Connection and setup Date and time The individual items are selected using the A lv buttons Changes to the current settings can be made using the lt gt buttons Automatic clock 5 09 35 Clock Tuesday 25 05 2010 Wintertime Local time offset GMT Here you can select the local time offset to UTC formerly GMT e g for Germany 1 hour You can set the offset in 1 hour steps The maximum offset is 12 hours and Automatic clock change Summer Time Here you can select whether the receiver should automatically change over to and from summer and winter time Either Onor Off If you select Off Summertime will be displayed in the line below Here you manually set the time of the receiver to summer time selection Yes If Summertime No is selected winter time is automatically selected GMT Greenwich Mean Time time zone 0 UTC Universal Time Coordinated the successor to GMT Connection and setup Common Interface Important information Always follow the operating instructions from your Pay
33. are select No if you are satisfied with your old software version and the changes in the new software are not relevant to you Updating the channel list Select Yes here if you want to install the new channel list or No if you want to retain your old channel list If a new channel list is loaded this will be automatically regenerated after each factory reset Restore Factory Default settings see Mainmenu Service Menu Factory Reset Once you have made all the settings for updating your receiver switch to the Start Update field and press the button The receiver will now automatically start updating the components you selected Follow all on screen instructions Once the update is complete the receiver is re initialised and starts operation again Never turn off the receiver during the update process as otherwise you could lose the entire software You would then need to re install it in a workshop or using a PC and network cable You can use the Service menu to check whether the new software has been installed Check the time setting following a software update You can also download the updates from the Internet The address is www kathrein de You will find the software under Service Software and Downloads Receiver UFS 900 You can also perform this update via the receiver s USB port see Service Menu Software update Software upd
34. arried out The guidance provided in the First installation section assumes that the receiver has been properly connected as per the Safety Instructions Important Information and Connection and Set Up sections through to the First installation section Required buttons on remote control for initial installation 9 iumericalinout Proceed to next step in u i I green the first installation Go back one step in the Confirm the changed red first installation values setting Select change individual menu parameters navigation Cancel input go back First switch your TV set on and select the AV HDMI input you have used to connect the receiver to your TV set Switch on the receiver at the power switch on the front of the unit Undertake the first installation If you have any questions or encounter problems contact your specialist dealer The following on screen display appears Language Setting Aa Desstash Always check the bar at the bottom of the on screen display This provides information on what to do next Use the Lalty buttons to select the desired menu language for your receiver and confirm your selection using the button The selected language will be given a coloured background The following languages Connection and setup are available German English French Italian Spanish Czech Dutch and Turkish Press the O green button to move to the next menu The following on
35. art cable see Connection example For system reasons the same video signals are present at both the TV Scart socket and also the video cinch output Audio connection Digital There are two ways you can access the digital audio HDMI The stereo audio is transmitted to your TV set via the HDMI interface If your TV set also supports Dolby Digital you can also receive the Dolby Digital audio via the HDMI interface providing it is broadcast by the channel provider On this issue refer to the operating manual for your TV set S PDIF Dolby Digital output The S PDIF output is intended for the connection of a Dolby Digital system see Advanced connection example in the technical appendix Connect the S PDIF output and the Dolby Digital system using an appropriate cable Analogue If you want to play the sound on your hi fi system connect the audio cinch sockets to the input sockets on the hi fi system using an appropriate cable see Advanced connection example in the technical appendix S PDIF Sony Philips Digital Interface Format digital output for Dolby Digital AC 3 audio Connection and setup First installation Before you start to use the UFS 900 read the sections Safety Instructions Important Notes Important Information and Connection and Set Up through to the item First installation Do not connect the unit to the mains until all installation work has been properly c
36. ate over USB Main Menu Service Menu Software update over USB After calling up the menu you will see the following on screen display example LEE pes a A pre condition for updating the software via the USB is that a FAT32 or EXT2 formatted USB storage medium with the software channel list to be installed is connected to the USB port at the rear of the receiver You can also download the updates from the Internet The address is www kathrein de You will find the software under Service Software and Downloads Receiver UFS 900 Press the alty button and the button to select the software channel list to be installed The following on screen display appears update selected components OK Yes Press the button to start the installation procedure The following on screen display appears The receiver then starts the installation automatically After the update of the channel list you must perform a factory reset see Mainmenu Service Menu Factory Reset Then to the second screen display during first installation Select country list set the answer in the Restore Channellist line to Yes In the Presorted for line select the desired country for which you want the channels to be pre sorted The other settings should be performed as described under the Connection and Set Up section of the First installat
37. ave connected a USB storage medium with multiple partitions the desired partition should be OPT selected using the J yellow button The following on screen display appears example Mediacenter Press the gt buttons to select the desired partition and then press the button to confirm your selection Partition an area of the hard disk When the hard disk was formatted it was divided into multiple partitions Media centre Playing media files selecting source directory Use the Allv buttons to select the source directory Open using the button Media data from the following connected devices can be played back USB storage media FAT32 or EXT2 formatted k 5 On Picture playback Mediacenter Use the Lalty buttons to select the eee as first picture in your slide show Press Tem 5 the button to start the slide show During playback you have the following TE Montage control options B pe a Start playback after pause Next previous picture Slide show is cancelled Media centre MP3 playback The Media Centre has an integral MP3 player The MP3 specific information display is based on IDTag Info V2 3 Only files from the previously selected a nn Eine Reise ins Gl c Feuerwehr Polkam folder are played back Use the allv rest ararua nen ee buttons to select the track with which a aaae you want to start your playback Press the button to start the MP3
38. broadcasts on a 16 9 TV set normal Pillarbox stretched Full Screen or zoom in Pan amp Scan or Press the i green button to move to the next menu TV aspect ratio Here you can select the TV picture format Either 4 3 or 10 9 Picture format Select the type of screen display depending on your setting for the TV aspect ratio TV aspect ratio 4 3 Pan amp Scan or Letterbox TV aspect ratio 16 9 16 9 or Automatic Always TV Scart signal output Select the type of video signal at the TV Scart socket here Select the signal that your TV set can process CVBS Colour Video Baseband Signal or RGB Red Green Blue signal Television System Here you select whether your TV set is a PAL or NTSC set If you don t know which it is select the setting AUTO for automatic PAL and NTSC are TV standards NTSC is used primarily in the North American region Connection and setup The following on screen display appears Antenna Configuration Number of Satellites Satellite 1 ASTRA 13 2E ac G 2 Satellite 2 HOTBIRD 13 0E If your receiver is connected as in the connection example see Connecting the receiver in this section no changes are necessary in the rest of the first installation If you are not familiar with the details of your reception system note the following In many cases the satellite reception system is a DISEQ
39. btitle function as follows Press the MJ yellow button use the A lv buttons to select Subtitle and press the button to confirm your selection The following on screen display then appears example BACK OK Use the Lalty buttons to select the desired subtitles and confirm by pressing the button The receiver will automatically return to the TV picture Basic Functions Videotext Teletext This symbol in the channel OSD shows you whether teletext is available for the selected channel When you press the button the receiver processes the videotext teletext service data for your TV set to display even when the signal is encrypted During the search the page which is being searched for is displayed in the top left hand corner with the time and date displayed at the top right When the search is finished the teletext broadcast by the relevant encrypted channel provider appears You have several options for opening the desired pages Entry using the number pad Scroll backwards and forwards using the Lalty buttons Scroll up and down in the sub pages e g 1 2 and 2 2 using the aa buttons 100 ARDtext Di 13 04 10 17 05 11 ARDText mn FDP Steuerkonzept mit f nf Stufen 120 Niederlande f r Nukleartribunal 122 Wende im Verkehrsschilder Streit 1276 Regisseur Werner Schroeter tot 401 Ringen Ewald im kleinen EM Finale 219 TT Klarer Sieg f r Ovtcharov 220 DEL Heute Ha
40. current programme top and next top and for the next programme bottom Teletext programme bottom available The following icons symbols may appear in the channel information Programme broadcast en in HDTV jo Audio selection is Stereo Portal channel Audio selection is channel options available Surround Sound Dany lg ar SaUnaNaer Subtitles are available selected Bo Audio selection is Mono left Teletext is available Basic Functions Calling up the channel options Portal channels bundle together several channel options After selecting the portal channel press the OPT yellow button press the Allv buttons to select Picture selection and press the button to confirm your selection The following on screen display then appears example Press the Lalty buttons to select your desired channel option and press the button to confirm OPT your selection Press the J yellow button or the ac button to exit the Select options display Basic Functions Select Audio track OPT Press the yellow button use the Lalty buttons to select Select Audio track and press the button to confirm your selection The following on screen display then appears example a Use the cursor a buttons to select your desired soundtrack option and press the button to confirm your selection Select subtitle If the channel OSD includes the following symbol for subtitles you can call up the Su
41. due to lightning strikes Power supply voltage Only operate the unit at the specified mains voltage indicated on the rear of the unit or on the external power pack The unit may only be connected to the mains and turned on once it has been connected to the antenna and to the TV set or the cable network and PC lf the mains voltage is too high there is a risk of fire Warning Warning Do not cover Moisture direct sunlight naked flames Protect the unit against moisture dripping and splashed water do not place any filled objects such as vases on top of the unit Do not place the unit close to a heater or expose it to direct sunlight and do not operate it in damp locations Only use the unit in a moderate climate not in tropical conditions Place no naked flames such as candles on top of the unit heat There is a risk of fire Batteries If your unit was supplied with batteries e g for the remote control take care that the batteries are not exposed to excessively high temperatures direct sunshine or fire Exchange the batteries only with types that are identical or equivalent Otherwise the batteries and also the remote control may be damaged Comply also with the safety instructions stated on the batteries There is a risk of explosions Ventilation The heat generated in this unit is adequately dissipated However the unit should never be installed in a cupboard or on shelv
42. e pull it out straight to the rear Basic Functions Remote control for live operation TV Radio ee i on off me Operation on standby off Currently unavailable F Call up teletext FIG 3 E Cell up main menu 5 7 B 14 t O z O aS Volume softer whi A ss Channel selection RL S TT A 4 BUC D DDD E EC ECCE CREED TEE A Call up channel information info muz banner and detailed information ii Call up favourites list m 1 x display of 4 3 broadcast K 5 2 x HDMI format mung Call up options menu TVR Ej Switch between E TV radio mode Call up EPG Electronic en Guide ae Navigation channel Select last channel called up O Q Sr D Co Q gt D 5 D O O 5 E Call up channel list confirmation call up selection UT Path i wit w RR v wt w Call up the Media Centre Ww ww gan Hil lt lt Fast Rewind a Start playback Call up recording archive KATHREIN EB Pause Start Time shift o Start recording OTR Tiii a T 277 WN 77 In Ny UN Ny I 4 ES Fast Forward eS Stop Playback Time shift Record OTR One Touch Recording Time shift Time shift TV Basic Functions want to watch TV Press to increase and decrease the volume Press
43. ecording eee een 37 Media CONMIC cccccccecccncsncccceccecceccesneseesunenss 61 want to delete a recording 38 General multimedia information Editing and selection options in the UFS J00 es ee 61 ca CE EEE a 39 Selecting a partition 61 Channel selection from the channel list 40 Bau HIG Glas Feleeingzeliee directory WPRUENRERENEDERTERIEREBEREEBTERBENCNNENDUENTENLERN 62 Channel Information 42 l l l Picture Playback sssisrissirisnssssinnisnsianrennenssisni 62 Calling up the channel options 43 MP3 playback acc 63 Select Audio track cceeeeceeeeeceeeeeeeeeeees 44 Playing external recordingS 22222 63 Select subtitle 0022200022200 02200 44 4 List of Contents Main Menu 2 2242 02040 0000 ann ann nn ann an nnn nn nn Calling up the main menu and INITOQUEION een Menu OverVieW ccccccceccccecceccccccscesueass Main Menu Edit Channel List Calling up the Edit Channel List menu Selecting the channel list favourites list to be edited nee Start Blockselection cccccccseeeeeeceeeeeeeeeees Editing channels favourites lists Main Menu Search Channels Automatic channel search Manual channel search Channel Search with service ID Main Menu
44. er The Polarisation and Symbol Rate options only need to be specified if the transponder has yet to be saved Polarization Press the lt gt buttons to select the correct polarisation horizontal or vertical Symbol Rate Use the SG button or the number keys to enter the applicable symbol rate Service ID Use the numeric pad to enter the service ID of the channel to be searched for Once you have performed all the settings use the Lalty buttons to switch to the Start Search selection field and confirm the start of the search using the button Note You can cancel the search at any time by pressing the u button The following displays during and in connection with the search are identical to those for the automatic search Main Menu Parental Control After calling up the menu you will see Mainmenu the following on screen display In order to access this menu you must D hia Assess Denied _ _ enter the four digit PIN code factory gt l setting 0000 SS Language Setting The following on screen display then appears In this menu you can set various restrictions parental controls The individual items are selected using the lv buttons Define new EIN Code The changes to the current settings can be performed using the aj buttons or the numeric pad Lock Mainmenu Select here whether the main menu should be locked If the main menu is locked the
45. er field Use the SG buttons to select the required transponder from the various ones listed If your settings are correct you will see at the top right of the screen the live signal of a channel from the currently selected transponder If you do not receive a signal check your settings again and if necessary call for expert help You have now completed all settings for the first satellite Press the button If at Number of Satellites you selected two satellites first follow the same procedure to perform the settings for the second satellite When you have finished the satellite configuration press the button The receiver automatically switches back to the Antenna Configuration overview Now use the Lalty buttons to select the New registration line and press the button to confirm LNB Low Noise Block converter feed system Connection and setup The individual items are selected using the Lally buttons The changes to the current settings can Transmission channel Transmission frequency Secure channel with PIN be performed using the lt gt buttons or the number pad Test connection Connected equipment Use the Lalty buttons to select the single cable system used in your reception system Either KATHREIN UAS 481 single cable LNB KATHREIN EXR 551 KATHREIN EXR 552 KATHREIN EXR 4 Kathrein single cable matrices for four subscribers KATHREIN EXR 8 Kathrein single cable mat
46. es another step Pressing the fast forward button reduces the rewind speed step by step Press the Play button to return to the normal playback speed Rewind button Pressing the Play button reverts from fast forward rewind mode or Play button from pause mode to normal playback and or shows hides the progress bar This stops playback or fast forward rewind and the receiver auto Stop button matically skips back to the recording archive Cursor button Each time the cursor button right arrow is pressed the playback point right arrow in the recording skips 30 seconds forwards Cursor button Each time the cursor button left arrow is pressed the playback point in left arrow the recording skips 30 seconds backwards ep u Call up option selection sound selection subtitles HDMI format Call up the recording archive during playback The playback continues OK button to run in the preview window Recording Archive Playing Back Editing Recordings You will see this display after starting playback of the recording in full screen mode or by pressing the a button once You will see this on screen display during all types of fast forward rewind or by pressing the EB button or gt button Editing recordings For selection of a recording select the desired recording in the selected sort list a using the cursor CP buttons After selection of the recording s to be B
47. es with inadequate ventilation Never cover the cooling slots on the unit e g with other equipment magazines tablecloths clothing or curtains Do not place any objects on top of the unit Unless stated to the contrary in the Connection and Set Up and Installation sections in the manual included maintain a clearance of at least 10 cm above the unit 2 cm to either side and 5 cm behind the unit to allow unobstructed dissipation of the heat generated There is a risk of fire Important Safety Instructions Important Notes Repairs Ensure that any repairs to your unit are carried out by qualified personnel Opening the unit and attempting to repair it yourself will void all warranty claims Improper work on the unit may jeopardise the electrical safety of the unit The manufacturer accepts no liability for accidents caused by the user opening the casing of the unit Connections Incorrect wiring of the connections can lead to malfunctions or defects on the unit Periods of extended absence thunderstorms mains socket accessibility In order to disconnect the unit from the mains completely the mains plug must be unplugged from the wall socket Therefore install the unit close to a mains socket and make sure that socket is accessible at all times so that you can disconnect the unit from the mains if necessary If you are away for an extended period and during thunderstorms always switch
48. ff only the factory stored transponders of the satellites you previously selected will be searched for new as yet unlisted channels If you set the network search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders Then use the Lalty buttons to switch to the field Start Search Pressing the button starts the search TV channels Radio found channels found During the search you will see the following on screen display example Shannel Search TV Channel The newly found channels are identified TVP INFO raw with the suffix New see example screenshot on the right Note BELSATEN os TRWAM You can cancel the search at any time by pressing the u button Satellite with the transponder currently being searched Progress bar Main Menu Search Channels After completion of the search you will see the following on screen display example Press the button Manual channel search After calling up the menu you will see the following on screen display The Lally buttons allow you to select different sets of parameters for the search In this menu you can selectively search a transponder for the new channels Satellite Use the lt gt buttons to select the satellite on which the transponder you want to search is located M
49. four digit PIN code will be requested when it is called up Without the four digit PIN code factory setting 0000 the main menu cannot be viewed and no changes can be made to the device settings Either Onor Off Lock Set Top Box Select here whether the receiver should be locked If the receiver is locked the four digit PIN code will be requested when it is switched on Without the four digit PIN code factory setting 0000 the receiver cannot be operated Either Onor Off Define new PIN Code Confirm the selection with the button Use the number pad to enter your new four digit PIN code When the fourth digit has been input the receiver will automatically skip to the next line Confirm PIN code For security you must now repeat the entry of the four digit PIN code To save the PIN code now press the button Main Menu Parental Control Your device PIN code has now been changed Keep your four digit PIN code in a safe place so that you always have access to your channels should you ever forget it If you have forgotten your device PIN code you must contact your dealer who will be able to unlock your receiver for you Main Menu Settings After calling up the menu you will see the following on screen display Use the L4 Ly buttons to select the setings desired menu and confirm your selection using the button pr First installation See the section Connection and Set
50. hed for only free Only free to air channels are searched for only scrambled Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant Pay TV provider Pay TV Pay per View such as Sky or Arena Connection and setup Network Search Use the SG buttons On Off to select whether a network search should be performed If you set the network search to Off only the factory default transponders for the satellite s you previously selected will be searched for new as yet unsaved channels If you set the network search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders When you have completed all settings press the O green button The following on screen displays appear example During the search you will see the following on screen display example Newly found channels are identified with the suffix New see screenshot example right Note You can cancel the search at any time by pressing the nee button After completion of the search you will see the following on screen display example Press the button The newly found channels are added at the end of the existing complete list TV ch
51. his Preview window you are always shown recording archive the current programme on the last channel to be selected with the channel name List of the available recordings ordered as described above Statement of the remaining memory capacity of the connected hard disk 1eCOre nk j Ejj ao 6 z te Zn H p C im Statement of the date time and duration of the highlighted recording a At this point you will be shown any age restrictions for the highlighted programme if this is supplied by the channel provider Recording Archive Playing Back Editing Recordings Selection options remote control buttons in the recording archive OPT Ej yellow button Select device or partition DES buttons Changing the sorting button Pressing the button for the first time starts the playback in the preview window If the button is pressed again playback is continued in full screen mode o red dot button Call up the edit menu a Navigation is always performed using the cursor buttons Eon The Lally buttons allow you to select individual recordings and the SG buttons allow you to scroll from page to page of the currently selected sort Pressing the or the button exits the recording archive and returns to the TV picture Sorting the recordings You can sort the recordings by the following criteria Ordered by date duration and Ordered by title
52. ion Main Menu Service Menu Restore factory settings After you have called up this menu you need to input the four digit PIN code factory setting 0000 to access it The following on screen display then appears All settings will be restored Now press the button to reset all the settings in the receiver to the as delivered state or abort the process by pressing the nee button After the reset the receiver automatically restarts and you will see the first on screen display for the first installation After a factory reset you must undertake the first installation see section Connection and Set Up First installation USB Device Management After calling up the menu you will see the following on screen display example Formatting BJ Make dedicated HOD ni Lia This menu allows you to format a storage medium connected to the USB port and to create a dedicated hard disk an archive hard disk specially reserved for this receiver This dedicated hard disk is necessary in order to make recordings using the receiver and also to view timeshift TV If the USB storage medium that is connected has more than one partition you can use the lt gt buttons in the Partition line to select the desired partition Main Menu Service Menu Formatting deleting Formatting deleting the selected connected USB storage medium or the selected partition irrevocably de
53. letes all data in it Press the v buttons to select the Formatting field then press the button The following on screen display appears Press the v buttons to select the EXT2 setting then press the button The receiver now starts the formatting It can happen that during the formatting the TV picture freezes The receiver cannot then be used until formatting is complete Creating a dedicated hard disk archive hard disk The setting up of a dedicated hard disk an archive hard disk specially reserved for this receiver is necessary in order to make recordings using the receiver and also to view timeshift TV Press the v buttons to select the Dedicated HDD field then press the button The following on screen display appears Main Menu Service Menu The individual items are selected using the Lally buttons Changes to the current settings can be made using the lt gt buttons MediaCenter Here you can select how much storage space is available for storing multimedia data such as JPEG or MP3 files For the hard disk in the example a maximum of 138 GB can be selected Timeshift Here you can select how much storage space is available for the timeshift function A maximum of 19 GB can be selected The more storage space is reserved for multimedia files and timeshift the less the storage space available for the recording archive 10 GB for the media centre and 8 GB for
54. llites gt New registration Number of Satellites Use the lt gt buttons to select how many satellites max 2 you would like to receive with your reception system If you use a UAS 481 single cable LNB in your reception system you are only allowed to select one satellite Then use the Lally buttons to select Configure satellites and confirm by pressing the button The following on screen display appears example Satellite Use the lt gt buttons to set the desired satellite selection from 17 pre programmed options Connection and setup LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Single LNB Low Frequency You only need to specify this data if your LNB type is not Universal LNB For this refer to the documentation supplied with your LNB Enter the LNB low frequency using the numeric pad or the SG buttons LNB High Frequency You only need to specify this data if your LNB type is not Universal LNB For this refer to the documentation supplied with your LNB Enter the LNB high frequency using the numeric pad or the SG buttons Test transponder this works only after a new registration To check whether the settings that you have made are correct use the Lally buttons to move to the Test transpond
55. med If you set the network search to Off only the factory stored transponders of the satellites you previously selected will be searched for new as yet unlisted channels If you set the network search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders Once you have performed all the settings use the Lalty buttons to switch to the Start Search selection field and confirm the start of the search using the button The following displays during and in connection with the search are identical to those for the automatic search Channel Search with service ID After calling up the menu you will see the following on screen display The Lally buttons allow you to select different sets of parameters for the search Satellite Use the lt gt buttons to select the satellite that is transmitting the channels to be searched Make sure your reception system is aligned to this satellite Main Menu Search Channels Transponder Frequency Use the SG buttons transponder frequency already saved or the number pad transponder frequency not yet saved to select the transponder frequency on which the channel being sought is transmitted At the bottom right of the screen display the receiver shows the current signal strength and signal quality of the selected transpond
56. na per lo sviluppo dell elettronica S 1 SV EL S P A to use these technologies These licences carry certain restrictions which apply also to you as the customer Accordingly this unit may only be used by the end customer for private non commercial purposes and for the licensed content It may not be used for commercial purposes The use of products or processes that are sold or used with this unit is not included in this statement The use of reverse engineering is not permitted in respect of the licensed technologies nor is disassembly Miscellaneous The information in this operating manual was correct at the time of going to print We reserve the right however to make changes at any time and without prior notice If new software is released for your receiver and this affects the information in the operating manual e g changes to the menus and or functions if we believe it necessary we will make available a new operating manual for download under www kathrein de Make a note of the receiver s basic settings these are set during the first installation so you can restore them if necessary Included in the software for this receiver is software that is licensed under the GNU General Public Licence The source code of the program is obtainable under www kathrein de linux receiver ufs900 The term DiSEqC used in this operating manual is a registered trade mark of the European Telecommunication Satellite Organisation EUTELSAT
57. ng group that formulates internationally applicable standards for the digital compression of video and audio MPEG 2 has become established as the standard for compression of digital TV signals MPEG 2 works up to a data rate of 100 Mbit s 102 MPEG 4 A further development of MPEG 2 with even higher data compression intended for HDTV transmissions NIT The channel identification number is also referred to as the Network ID or NIT NTFS File system for storage media OSD On Screen Display Displays by the receiver on the TV screen e g main menu PAL Analogue TV standard Pay TV Television channels available on subscription e g Sky Encrypted transmitters which can be decrypted only by using the appropriate smart card As a rule these services are subscription only PID The PID Packet IDentification number is an identification number for video signals and audio signals in the digital data stream of DVB MPEG 2 signals The receiver uses the PID number to create a unique assignment for the video and audio data transmission The PCR PID is the identification number for the synchronization signal The PID PCR is normally identical to the video PID For programmes broadcast in multiple languages the audio PD can be entered manually to assign a different language to the TV programme After the PID is entered the digital receiver automatically selects the audio data identified by the PID number from the data s
58. nnover Ingolstadt 601 Tagesschau UT Inhalt A 2 101 Programm Tagesschau 112 Boulevard 500 nb aller Welt 155 Wissen 510 OPT Select using the options indicated by the coloured buttons a red i green W yellow and J blue listed across the bottom of the screen Press or to exit teletext Basic Functions One Touch Recording OTR recording directly to a hard disk To start recording directly to the hard disk press the o red dot button The following on screen display appears example Use the v buttons to select the lines to be changed make the changes using the lt gt buttons Duration The duration of a recording is determined automatically by the receiver based on the start and finish times You can however correct the duration manually In this case the receiver automatically adjusts the end time to correspond to the new recording duration Press the button to start the recording you can cancel it by pressing the or the o red dot button After the recording has started if you want to stop it you must press the m button and then the button to confirm See the section Recording Archive for details of how to pay back a recorded programme Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Electronic Programme Guide EPG General information on the programme guide What i
59. nshot above Basic Functions Channel selection from the channel list Press the button to open the channel list The following on screen display appears Call up the Currently selected Live picture from complete list channel list the selected channel a green button vV Channel 205 Eier TEE Signal SE HSE24 Digital O OOOO strength m i 7 I Channel list PER and EinsFestiva quality i EIL ASTRAHD 0000 Call up the 211 212 favourites Usts 213 B i gt 14 ann 2 red button a WoR Aachen O O Call up sorting By Selanne Channel data Call up itch Transmitting satellite ale Arnabene awite Transponder frequency pra between Bei sorting the TV EN ar a Radio lists saN E yellow button Call up the search function E button can be called up from any channel list Information on selecting favourites lists You can also call up the favourites lists directly from TV screen using the a red button Then use a the cursor buttons re to select the desired favourites list and confirm your selection using the button The receiver automatically selects the first channel saved in the favourites list and returns to the TV screen You can now select the sequence of channels saved in the selected favourites list using the buttons Basic Functions Now use the respective coloured button to select the category in which you wish to open a channel list i red button Call up the Favoriteslists
60. of manufacture The information for these settings can be found on the Internet or in relevant magazines Updating the receiver software Your receiver was equipped in the factory with the latest software version at that time We are however constantly working on adapting the software to the wishes of our customers and to developments in technology Further information on this can be found in the sections Main Menu Service Menu Software Update Product return original packaging Please keep the original packaging in case you need to return the product at any time The receivers are fragile due to their construction and are only adequately protected by the original packaging If the receiver is not shipped correctly the guarantee warranty on it will be voided Software changes use of applications Any modifications to the receiver software or the use of applications not provided by Kathrein will invalidate the warranty You will have to bear the costs yourself for shipping and repairing any receiver that requires attention due to modifications to the software and use of applications other than those provided by Kathrein Therefore exclusively use only software and applications provided by Kathrein for your receiver These are available by downloading from the satellite or from our Internet pages www kathrein de Ventilation slots on the unit Make sure that the ventilation slots on the unit are not covered in any way Other
61. of the receiver and set it up as described in the section Mainmenu Service USB Device Management Press EB to start timeshift Made a mistake z Presse to cancel timeshift Press DES during playback to wind forward and rewind Press gt to return to normal playback speed EE Press EB to pause playback Press to cancel timeshift and return to normal live TV Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Basic Functions want to record a programme immediately To make a recording using the UFS 900sw you must connect an external hard disk via the USB port at the rear of the receiver and set it up as described in the section Mainmenu Service USB Device Management Press the o red dot button to open the Record window TE aaaea Press to start recording the En __ programme immediately or a Press to change the duration before recording Made a mistake recording Press the o red dot button or cx to close the window without Press E and to stop a recording that is in progress Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Basic Functions want to record a programme that is scheduled for later timer list To make a recording using the UFS 900sw you must connect an external hard
62. om the Kathrein product range see also www kathrein de Service FAQs Basic Functions want to delete a recording Press gt to open the recording archive a Press ae to select a recording Press the eo red dot button to open the Edit menu a Press ae to select the Delete option then to confirm Respond to the security question by pressing to confirm Press cx to exit the recording archive and return to normal live TV Basic Functions Editing and selection options in the menus In some menus on screen displays this box is shown with a particular colour gradation Each colour gradation stands for a specific view selection The colours assigned to the buttons are shown in the table below Where the functions of these buttons are assigned for the current menu view they are also shown in the line at the bottom of the on screen display Button on the Colour remote control Green Yellow N Red o Blue Ill HE 208 SON is 71 212 313 Fig 215 ALI WOR Aachen Always check the bar at the bottom of the on screen display This provides information on what to do next In many menus all the editing and selection options for that menu are shown at the bottom of the on screen display Where a specific remote control button is required for executing them or calling them up this also will be shown see example scree
63. onnection Connection for an external recorder such as a video or DVD recorder Viterbi rate The Viterbi rate code rate error rate characterises the error protection used by the channel provider The DVB standard provides the following values 1 2 2 3 3 4 5 6 7 8 Y C S video signal 8PSK 8 Phase Shift Keying Digital modulation process used for HDTV satellite transmission 103 Service If despite studying this operating manual you still have questions about getting started with the unit or using it correctly or if unexpected problems occur please contact your specialist dealer 104 105 106 107 Internet www kathrein de KATHREIN Werke KG Anton Kathrein Stra e 1 3 P O Box 100 444 83004 Rosenheim GERMANY KATHREIN Antennen Electronic 936 3847 0610 ZWT Technical data subject to change
64. ontrol no longer the remote control code can be din Remote control code has been responding changed Your receiver requires changed inadvertently ass the remote control code 1 For this purpose simultaneously A No signal warning appears on some or all channels press the Back and 1 buttons Check Summer Time Enabled in the Settings Date and Time Setup menu and change Summer Time setting wrong it as necessary Use the power Wrong time being displayed An incorrect time was imported switch to switch the receiver from the reception signal off from the current channel e g Das Erste or ZDF wait 10 seconds and then switch it back on DECT telephones operate on the same frequency as these channels Interference may Consult your antenna specialist occur due to inadequate level or poor shielding of cable The following channels cut out or No or bad signal appears DSF Tele 5 HSE 24 and Sonnenklar TV Technical appendix Alphanumeric entries For entries such as names of favourites or search expressions use the keyboard displayed on the screen see example screenshot The letters assigned to the number pad also apply to your remote control They are used very similarly to a mobile phone The following buttons can be used for entry or to select an action y Z Technical appendix Cancel entry without saving Cancel entry without saving After yo
65. owing on screen display appears example Selected view Current day of the week and time 1445 Flatworid o O of the EPG 1615 Start time 16 55 and name 17 40 fth gt 18 10 of the 18 35 programme 19 00 19 30 20 15 22 05 22 55 Available selections Unte gs Im S den Afrikas X enlus Mini Max oder Die unglaublichen Abenteuer c Mini Max oder Die unglaublichen Abenteuer de ARTE Journal Bei Anruf Entdeckung Das Biest muss sterben Dance for All Malick Sidib Current picture for the selected channel 7 day calendar for the programme guide Date and time of the highlighted programme with genre and duration At this point you will be shown any age restrictions for the highlighted programme if this is supplied by the channel provider Colour Button on the remote control View Green Current Yellow go OPT Programme preview Il Red i Timer list 48 Electronic Programme Guide EPG Navigation in the EPG remote control buttons in the EPG I rea button Call up the timer list display of all pre programmed recordings ll buttons Navigation in the individual views e g 15 minutes skip forward in the Current view OPT u yellow button Call up a preview of the currently selected channel Program guide sutton P to jump forward 24 hours in the EPG P to jump backward 24 hours in the EPG e g into Current and in
66. player Information about the currently selected MP3 file title artist album genre This information must be contained in the MP3 file ID3Tag information After the playback has started you will see the following additional display between the TV picture and the MP3 information Dlebiaahe rer Eine Reise ins Gl c Feuerwehr Polkam Freut euch des Leb F hnsturm Walzer Playing external recordings The recording to be played back does not necessarily have to have been made on the UFS 900 The UFS 900 can be used to play back recordings made using the Kathrein UFS 821 UFS 822 UFS 902 UFS 903 UFS 904 UFS 910 UFS 912 UFS 940 and UFS 922 receivers Media centre The selection is made using the Lally buttons To start playback press the button The picture of the recording is displayed in the preview window in the top right Press the button again to start the playback in full screen mode To cancel playback press the Ea button During playback you have the following control options Start playback after pause show hide playback banner Skip 30 seconds forwards or backwards Available fast forward speeds 2 3 and 4 times Each time the fast forward button is pressed the fast forward speed increases another step Pressing the rewind button reduces the fast forward speed step by step Press the Play button to return to the normal playback speed 2 E j 717 r J Ble L
67. ppendix Tl III III Fr lee EHR 1581 Bid l Sat IF 950 2150 MHZ 9 ESD ESC 100 KAZ 11 KAZ 12 overvoltage protector Short technical guide AC 3 Output for Dolby Digital signal ASTRA SES Societe Europeene des Satellites satellite system Analogue and digital transponders in the frequency range 10 7 12 75 GHz AV programme pos Preferred programme slot on TV set for external connections such as Scart and HDMI CAM Conditional Access Module Decryption decoder which uses a smart card to decrypt the encrypted radio and TV signals Channel package The channel package for a digital transponder normally includes several TV and radio channels Each channel package has a fixed assignment for the transponder transmission frequency for polarisation horizontal or vertical for the symbol rate and for the Viterbi rate or error rate Cl Common Interface Internationally standardised interface for CA modules Composite colour video signal Colour baseband signal for the transmission of colour video signals Data rate Data bits transmitted per second Is expressed in kbit s or Mbit s The higher the data rate the better the quality of the transmitted signal Data reduction Compression of video and audio signals Redundant information is discarded DiSEqC DiSEqC Digital Satellite Equipment Control is a communication system between a satellite receiver master
68. r frequencies The transponder selection and conversion to the subscriber frequencies is undertaken using special tuner modules so called SCR Satellite Channel Router that are installed in the feed system or in the matrix The Kathrein single cable system satisfies the single cable standard in accordance with EN 50494 i e all components of a single cable system that satisfy this standard can be installed in a satellite system Smart card Card from Pay TV provider to decrypt its channels Stand by Standby mode Symbol Rate The symbol rate describes the quantity of data that is transmitted per second The symbol rate is measured in MSymbols s and is equal to the number of symbols received per second Timeshift function Time shifted playback Transponder A transponder is a frequency converter which receives TV and radio signals broadcast from the earth converts them and the rebroadcasts them to the earth at a different frequency A satellite has several transponders Analogue transponders transmit only one TV channel and possibly multiple radio channels on a single transmission frequency Digital transponders simultaneously transmit several TV and several radio programmes on a transmission frequency If a channel provider is broadcasting several TV channels via a digital transponder we refer to the provider s channel package The terms digital transponder and channel package have the same meaning VCR PVR c
69. rices for eight subscribers KATHREIN EXU 908 or User defined for all single cable systems not covered by any of the above specifications Refer to the documentation supplied with your system for the settings for the SCR frequencies and any PIN assigned to the tuner You will find there a printed list showing the assignment between the various SCRs and the respective transmission frequencies It may happen that you cannot freely select the PIN for protection of individual frequencies this also may be listed in the documentation for the single cable components Please note also that multiple receivers cannot share the same frequencies channels the receivers would interfere with each other Transmission channel EXR 551 Select a free available transmission channel 2051 0024 Transmission frequency 1400 MHz 1516 MHz If not preset by the receiver select here one of 1 SCR 0 the free available transmission frequencies 2 SCR 1 See example on the right EXR 551 for assignment 3 SCR 2 1 632 MHZ of a transmission channel to a transmission 4 SCR 3 1748 MHz frequency ar z s gt lt GeEc dbe SCR Satellite Channel Router transmission channel Connection and setup Secure channel with PIN not possible in every system If your single cable system allows the transmission frequency to be protected by entering a PIN this is the menu where that can be done No other receiver can then use
70. roadcasts on a 16 9 TV set normal Pillarbox stretched Full Screen or zoom in Pan amp Scan TV aspect ratio Here you can select the TV picture format Either 4 3 0r 16 9 Picture format Select the type of screen display depending on your setting for the TV aspect ratio TV aspect ratio 4 3 Pan amp Scan or Letterbox TV aspect ratio 16 9 Always 16 9 or Automatic TV Scart signal output Select the type of video signal at the TV Scart socket here Select the signal that your TV set can process CVBS Colour Video Baseband Signal or RGB Red Green Blue signal Television System Here you select whether your TV set is a PALor NTSC set If you don t know which it is select the setting AUTO for automatic Main Menu Settings Suit screen menu After calling up the menu you will see the following on screen display The individual items are selected using the Lalty buttons The changes to the current settings can be made using the SG buttons or the number pad Functional range Here you can configure the functional scope of your receiver You can choose between High Normal and Low The table below shows which functions are available at each configuration step FAV OPT TVR Ej button red button yellow button blue button Complete aeo PA TV Radio Channellist Favoritelists options Not Programme assigned Not assigned
71. rom the selected channel Currently selected Call up the channel list complete list dit TV Channellist a green button e Ea Signal Channel list Strength and TRA HD ve quality AT t Call up the AZE Channel FAV E A red button E WDR Aachen O Ea Call up the entire list sorting by Switch satellite and Call up TEE between Call up the new channels alphabetic H ae the TV search function sorting radio lists oe EJ button can Ei yellow dot button ia blue be called up from button button any channel list Main Menu Edit Channel List Selecting the channels to be edited Select a channel in the selected channel a list favourites list using the cursor a buttons see example screenshot on the right To select several channels that are kd mor sacnsen U O listed directly following each other in 2 norrss O yO the selected channel list you can start block selection see Edit channels Start Blockselection Move After selection of the channel s to be edited press the o red dot button The following display appears see screenshot on the right Use the Lally buttons to select Move and confirm your 215 selection with the button T WOR Aachen f a Now use the cursor a buttons or the number pad to select the new channel memory position s then confirm the insertion with the button 210 H 2121 213 214 HE T woran O O O Main Menu Edi
72. s the electronic programme guide The electronic programme guide in the following section referred to as the EPG for short provides all programme information free of charge EPG data and informs you up to a week in advance However this programme information must be broadcast by the related channel provider lf no EPG data are available the receiver instead of showing information on the current programme shows the message No data available EPG data update The EPG data for the currently selected channel are updated automatically in the background while you are watching a TV channel Where are the EPG data stored saved The data are saved on the archive hard disk that is connected and has been set up see Main menu Service USB device management These data are loaded after the receiver is started The full scope of the EPG is accessible only when the archive hard disk is connected and has been set up The EPG data are not available immediately after first installation The EPG data will only be updated when a channel is watched Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Electronic Programme Guide EPG Calling up the EPG The EPG is called up by pressing the button Each time the EPG is called up you will automatically be shown the Preview view yellow irrespective of which view you were shown the last time you exited the EPG The foll
73. screen display appears Country List Selection a Presorted for Use the SG buttons to select whether to replace the factory pre programmed channel list by a pre sorted channel list for a specific country at present only a limited number of pre sorted channel lists are available If you prefer to use the factory pre programmed channel list choose No under Restore Channellist Press the O green button to move to the next menu The following on screen display appears a Use the 6 buttons here to select the basic settings for the video and audio output from the receiver to the TV set During this process refer to the operating manual for your TV set and take care to select only those settings that your TV set can process Video Output via Select the connection on the receiver to which you have connected your television Either Connection and setup HDMI HDMI Format Here you can select the video resolution that will be sent to your TV set Either 71080i resolution 1920 x 1080 half screen images 576p resolution 720 x 576 full screen images or 720p resolution 1280 x 720 images full screen Automatic Audio Format via HDMI Here you can select the type of audio signal that is transmitted by the HDMI interface Select the signal that your TV set can process Decoded PCM or S PDIF format Show 4 3 event Here you can select the type of screen display mode for 4 3
74. t Channel List Delete Channels that are deleted from a list other than a favourites list are deleted irrevocably and can only be restored by performing a new channel search Deletion of channels from a favourites list is the only circumstance in which the channels remain present in the complete list the deletion only applies to the selected favourites list After selection of the channel s to be edited press the oe red dot button Use the Lally buttons to select Delete and confirm your selection with the button The selected channel s will be deleted Skip After selection of the channel s to be Iv Channelllst edited press the eo red dot button 207 XXHOME Use the lv buttons to select Skip and confirm your selection with the ld astman 212 button i GALNORFSHH ooo 215 LT FS Ts The following on screen display appears ne EIOS _ 1 see example screenshot on the right Selec The channel that is to be skipped in future is shown in grey in the channel list If you wish to select it in future you can do this only by direct selection from the channel list When manually zapping through the channels using the gt buttons the channel will be skipped and no longer displayed This function can be cancelled using the edit menu select Restore to zap list Main Menu Edit Channel List Lock After selection of the channel s to be edited press the o red dot button
75. the button see also section Basic Functions Channel selection from the channel list Automatic channel search After calling up the menu you will see the following on screen display The Lally buttons allow you to select different sets of parameters for the search Satellite Using the lt gt buttons select the satellite to be searched Make sure your reception system is aligned to the selected satellite You can search only one satellite at a time If you have connected a multi feed reception system e g reception of ASTRA 19 2 East and HOTBIRD 13 East Main Menu Search Channels you must repeat this procedure once for each satellite You can however start the first installation again in the course of which a channel search of all the satellites you selected is performed Channel Search Mode Use the lt gt buttons to select the type of channels that are to be searched for You have three options free amp scrambled All channels are searched for only free Only free to air channels are searched for only scrambled Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant Pay TV provider Network Search Use the SG buttons On Off to select whether a network search should be performed If you set the network search to O
76. the next channel down in the currently selected channel list Channel up This button allows you to start the receiver and also to switch to the next channel up in the currently selected channel list Because there are no numbered buttons no password PIN protected functions can be displayed 1 The unit is not fully disconnected from the mains see the sections Safety Instructions Important Notes and Periods of extended absence thunderstorms mains socket accessibility Troubleshooting Inthe event of a malfunction first check all the cable connections and operating states Receiver and TV set power plugs are connected to wall socket Antenna cables are connected to the receiver input Receiver and TV set are correctly connected to each other by a HDMI or Scart or cinch cable Audio connections are made to the Hi Fi or Dolby Digital system as appropriate Receiver and TV set Hi Fi Dolby Digital system are switched on check power indicators Receiver is responding to remote control ol ee Ne A selection of troubleshooting tips is offered below Consult an antenna specialist to have it checked and repaired as necessary Check the settings made in the Settings Antenna amp Satellite Tuner Configuration menu and change them if necessary Batteries may be discharged Check the batteries By simultaneously pressing the Back button in conjunction with buttons on the number pad 1 8 Remote c
77. the unit off at the mains and unplug it from the socket This also applies to the other equipment connected to the unit Isolation from the cable network is also recommended Note any timer programming receiver and turn the unit on again promptly before the recording time Installation location All electronic equipment generates heat However the heating of this unit lies within the permissible range Sensitive furniture surfaces and veneers may become discoloured by the effects of constant heat over time The feet of the unit can also cause colour changes to treated furniture surfaces If necessary place the unit on a suitable stable and flat base Electronic equipment is not domestic waste it must be disposed of properly in accordance with directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27 January 2003 concerning used electrical and electronic appliances At the end of its service life take this device for disposal at a designated public collection point Spent batteries are special waste Do not throw spent batteries into your domestic waste take them to a collection point for spent batteries Safety Instructions Important Notes Channel assignment The channels available on the satellites and transponders are subject to continual change If changes do occur the new channels have to be set on the receiver because the factory preset programming corresponds to the status on the date
78. time in EPG by pressing the a red button The following on screen display appears example The Timer list view shows you all the recordings that are scheduled The SE buttons allow the recordings to be sorted into once or repeated recordings a The cursor a buttons allow you to select a recording The button allows you to switch over the channels on which the recording is scheduled The buttons allow you to skip backwards and forwards through the future scheduled recordings a day at a time The eo red dot button allows you to delete a recording that had been scheduled Timer overlap If there is an overlap in the scheduling of recordings the receiver will display the Timer overlap warning shown on the right as soon as you try to save the recording settings You cannot save schedule the recordings until you have first resolved the timer overlap Mon rbb Berlin 18 00 18 25 rbb UM SECHS Planet der Affen Zur ck in die Zukunft Recording Archive Playing Back Editing Recordings Function can be used only when the archive hard disk is connected and has been set up Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs Calling up the recording archive The recording archive is called up by pressing the button or the ee button The following on screen display appears example Selected sorting the In t
79. times as many picture points that is approximately 2 million pixels compared to a conventional PAL picture with only approximately 400 000 pixels Worldwide there are currently two HDTV standards based on the two formats 1080i and 720p The two standards differ in the number of picture lines and in the transmission procedure For the human eye the difference between the two HDTV standards is hardly perceptible however in comparison to the PAL system moving pictures look much more dynamic Transmission technology and reception equipment will be able to handle both standards in the future PAL 720 x 576 List of Contents Pre ICE een 2 Videotext Teletext 0 45 Difference between PAL and HDTV 3 One Touch Recording OUR recording directly to a hard disk 46 List of Contents nennen 4 Electronic Programme Guide EPG 47 Safety Instructions Important Notes 6 General information on the programme Connection and SIUD siini 10 guide ee ee err ee T 47 Scope Of SUPPIY cceccessesseseseseeeeeereees 10 Calling Up the al a One 48 Inserting batteries into the remote Navigation in the EPG remote control CONEFOI ooo ecececeecesceceesceseercersereceseereerenreesees 10 b ttons in the EPG Lucien 49 Front rear view of the receiver 11 Views using the EP One 50 Connecting the receiver cn 12 Preview view Program guide 50
80. to Preview o red dot button Add a programme to the recording settings a button Shows any further information on the selected programme Press one of these buttons in the Preview or x fo EJ buttons Current view to close the EPG and display the selected programme on the TV screen Navigation within each view is always performed using the cursor buttons The Lalty buttons allow you to select individual channels programs and the lt gt buttons allow you to scroll from page to page in the currently selected list Press the or the ber button to exit the EPG and return to the TV picture KATHREIN Electronic Programme Guide EPG Views using the EPG Preview view Program guide The Preview view can be called up at any OPT time in EPG by pressing the yellow button In the Preview view you can see the programs for the currently selected channel Provided that EPG data has been supplied transmitted by the channel provider the receiver displays the programme lists for one week in advance Malick Sidib le di B You can use the cursor C buttons to select the desired programme and if available you can use the i button to open further information on the desired programme You can use the DE buttons to scroll through the programmes in the order of the complete list of programmes you remain however in the preview The gt button allows you
81. to select how many satellites max 4 you would like to receive with your reception system Satellite selection setting Then use the Lalty buttons to select the first satellite slot Press the button to open the menu for the satellite settings The following on screen display appears example L quency LNB High Frequency 10600MHz LNB Power On Test transponder 11361MHz Satellite Use the SG buttons to set the desired satellite selection from 17 pre programmed options Connection and setup LNB Type If your reception system does not have a Universal LNB use the Opn buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Single LNB Low Frequency You only need to specify this data if your LNB type is not Universal LNB For this refer to the documentation supplied with your LNB Enter the LNB low frequency using the numeric pad or the SG buttons LNB High Frequency You only need to specify this data if your LNB type is not Universal LNB For this refer to the documentation supplied with your LNB Enter the LNB high frequency using the numeric pad or the SG buttons 22 kHz Signal You only need to specify this data if your LNB type is Single The 22 kHz signal is needed to switch LNBs when using multi feed reception and to switch between Low and High band For this refer to the documentation supplied with your
82. tput Digital AC 3 audio 6 RF IF input 13 Video output composite colour 7 USB 2 0 port USB A connector 14 Audio outputs L R cinch sockets 8 Common Interface for one CA module for 15 Power supply connection 12 V Pay TV cards 9 HDMI connection D The unit is not fully disconnected from the mains see the sections Safety Instructions Important Notes and Periods of extended absence thunderstorms mains socket accessibility 2 CA module and Smartcards are not included with this product HDMI High Definition Multimedia Interface digital interface for video and audio RF IF Intermediate frequency satellite signal for the receiver converted by the LNB Connection and setup LED in the front panel display The LED lights up Red Receiver is in stand by mode Green Remote control has been pressed Display in the front panel Rec Recording in progress Display flashing Timeshift in progress Connecting the receiver If you do not know the configuration of your satellite reception system contact your specialist dealer Connect the Sat IF inputs on the receiver to the satellite reception system Use coaxial cable with an F standard connector see illustration on right Conventional DiSEqC system IR SENSOR DATA 1 0 Connection and setup TV connection Connect the satellite receiver HDMI or alternatively TV Scart socket and the TV set using an HDMI or Sc
83. tream and assigns it to the video signal PIN Personal Identification Number For this unit the PIN is a 4 digit numeric code which must be entered to unlock the unit to allow access to certain functions and channels Polarization The individual transponders on satellites transmit on two different polarisation planes horizontal and vertical As a result the capacity of the transponder is increased Short technical guide QPSK Quadrature Phase Shift Keying Digital modulation process that is used for satellite transmission 8PSK is also used in connection with HDTV Receivers Receiver RGB Video signal made up of three individual colour signals red green blue SAT IF signal Receiver input signal satellite intermediate frequency Scart cable 21 pin connecting cable e g receiver TV SCR single cable system Satellite Channel Router The single cable system is used to distribute digital Sat IF signals including HDTV and terrestrial signals over one cable to up to eight receivers There is no limit on the variety of channels i e the complete range of channels from one or two satellites is transmitted Switching and the transponder selection are undertaken in the feed system or in the matrix and are controlled by the receiver using a special DiSEqC command to EN 50494 Each receiver is allocated a fixed subscriber frequency over which it receives its channels A twin receiver requires two such subscribe
84. tton Use the v buttons to select Rename favoritelist and confirm your selection with the button You can now rename the favourites list you selected The following on screen display appears see example screenshot on the right Alphanumeric characters are input as described in Technical Appendix Alphanumeric entries Confirm the name you have entered for the favourites list using the button Start Blockselection See Edit channels channel lists Start Blockselection Main Menu Search Channels After calling up the menu you will see the following on screen display You have three different search options Automatic Channel Search Manual Channel Search Search with Service ID Use the v buttons to select the Automatic All transponders for the satellite desired search type and confirm your Channel you selected will be searched Search selection using the button Manual Only the selected transponder for Channel the satellite you selected will be Search searched Search with Search for a specific channel Service ID using its service ID After a search of whatever type the receiver shows all newly found channels in the channel list under the heading New Channels You will find this rubric in the channel list at the end of the green complete list select using the BES buttons The channel list is called up on to the TV screen by pressing
85. u have entered the desired expression press the button in order to load the name search expression nor or the button to abort the entry Advanced connection example ae HDMI Scart DVR VCR DVD Cinch HDD External hard disk Technical Specifications Technical appendix Type UFS 900sw Part no 20210167 Colour Black RF range Sat IF band MHz 950 2150 Input level band dBuV 44 83 TV system video Modulation FEC demultiplexer DVB S DVB S2 standard Video resolution CCIR 601 720 x 576 lines 576i 576p 720p 1080i Video decryption MPEG 2 MPEG 4 compatible Input data rate MSymb s 2 45 30 for DVB S2 8PSK S N dB gt 53 TV system audio Decryption AC 3 MPEG 1 Layers 1 2 and 3 Sampling rate kHz 32 44 1 48 S N dB gt 65 Power Supply Power supply voltage V Hz 230 10 50 60 DC V 12 De max typ operation W lt 36 19 1 LNB supply horiz vert VimA 14 18 max 400 Control signal kHz 22 DiSEqC 1 0 and SCR single cable system Connections Sat IF input output 2 x F socket TV VCR connection 1 x Scart sockets Video output analogue 1 x Cinch sockets Video audio output digital 1 x HDMI Audio output analogue 2 x Cinch sockets Audio output digital 1 x Cinch sockets Data interface RJ 11 socket Common Interface For 1 CA module USB 1 x 2 0
86. versal LNB For this refer to the documentation supplied with your LNB Enter the LNB low frequency using the numeric pad or the SG buttons LNB High Frequency You only need to specify this data if your LNB type is not Universal LNB For this refer to the documentation supplied with your LNB Enter the LNB high frequency using the numeric pad or the SG buttons LNB Low Noise Block converter feed system Connection and setup 22 kHz Signal This cannot be set and is not required LNB Power This is factory set to On but must be changed of your LNB has its own power supply In most cases the LNB power supply is provided by the receiver Test transponder Select the Test transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings press the a green button The receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section Connection and setup DiSEqC 1 0 The individual items are selected using the Lally buttons If you require to access submenus they can be called up using the button The changes to the current settings can be performed using the SG buttons or the number pad g Satellite 1 ASTRA 19 2E Satellite 2 HOTBIRD 13 0E Number of Satellites Use the SG buttons
87. wise the unit may overheat There is a risk of fire Power supply unit KATHREIN H i Netzteil AC Adapt The power supply unit and the receiver are for indoors use D ie aiptor eile Nr art No only Use the power supply unit supplied with the receiver 1683228 The use of any power supply unit may damage the receiver GPE402 120250D Eingang Input 100 240V 50 60Hz 1 0A j i iral A Output There is a risk of fire ee He Wirkungsgrad V Efficiency level The original power supply unit may differ from that illustrated O C 8 Safety Instructions Important Notes Switching the receiver off Before you switch the receiver using the power switch you must switch the remote control into stand by mode by pressing the stand by button lei In standby mode any changed or new data that are broadcast will be saved by the receiver Once the receiver is in standby mode it can be fully switched off at any time at the power switch at the front of the unit Do not switch the receiver off at the power switch directly from operating mode This can lead to a loss of data and corruption of the software Information on Audio MPEG Inc and S 1 SV EL S P A This unit makes use of legally protected technologies which are protected by patents in the USA and also by other intellectual property rights in other countries KATHREIN Werke KG has obtained licences from Audio MPEG Inc and Societa Italia

Kathrein UFS 900

Contents

Download Pdf Manuals

Related Search

Related Contents