Belkin F7D4401UK router
Contents
1. Belkin Router Monitor The Belkin Router Monitor application helps you to monitor your Router s status and change network settings Integrated 4 Port Gigabit Switch Your Router has a built in 4 port network switch to allow your wired computers to share printers data files digital photos and much more at speeds of up to one gigabit per second Dual USB Ports Two USB ports let you plug in printers hard drives and other USB devices to share across your network 19 System Requirements Modem Router Broadband ADSL Internet connection with RJ11 telephone connection At least one computer with an installed network interface adapter TCP IP networking protocol installed on each computer RJ11 ADSL telephone cable Internet browser Setup Software A computer running Windows XP SP2 or higher Windows Vista or Windows 7 or Mac OS X v10 x Minimum 1GHz processor and 256MB RAM 600MB of free hard drive space for installation Memory Safe and USB Print and Storage Manager Windows XP SP2 or higher or Windows Vista or Mac OS X v10 4 or later Minimum 1GHz processor and 256MB RAM 50MB of free hard drive space for installation 20 Daily DJ Music Labeler and Vuze PC Windows XP SP2 or higher Windows Vista or Windows 7 2GHz processor 1GB of RAM DirectX 9 0 compliant video and sound Internet Explorer or Firefox Mac Mac OS X v10 4 8 or later Intel Core Duo 1 83GH2. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND SUCH IMPLIED WARRANTIES IF ANY ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL SPECIAL DIRECT INDIRECT CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS BUT NOT LIMITED TO LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Some states do not allow the exclusion or limitation of incidental consequential or other damages so the above limitations may not apply to you 33 REGULATORY INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We Belkin International Inc of 12045 Waterfront Drive Los Angeles CA 90094 declare under our sole responsibility that the device F7D4401 v1 complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Exposure to Radio Frequency Radiation The device shall be used in such a manner that the potentia
3. If your computer doesn t have a wireless adapter or the setup software is unable to control it you may be asked to connect your computer to the Router with a network cable If the setup software is unable to detect your and VPI settings based on your country you may also need to enter this information Your ISP is likely to have provided it GETTING START 1 Advanced Tools amp Settings Belkin Setup BELKIN Wireless Router After the initial setup is complete you have the option to change settings like your network name security type and password To make these changes and others click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change Manage MAC Addresses Access Point Setup Network Name amp Security Personalize your network name SSID password and strength of wireless security Network Name amp Security Personalize your Network Name SSID Firewall Settings password and the strength of wireless security Manage Virtual Servers Control Access Manage DDNS Internet Service Provider amp Login Settings Dire More Moved Changed Internet Service Providers If you d like to change these settings without running through the setup process again this is the place 4 7 User Manual Internet Service Provider amp Login Settings Have you moved or changed Internet Service Prov
4. Using the card from the side of your router enter the Network Name SSID and password exactly as they appear on the card Network Name SSID Password Cancel 5 After a brief installation the setup software will ask you for the network name and password from the network information card that is attached to your Router Store the card under the base of your Router for future reference Belkin Setup BELKIN Wireless Router Success You are now connected to the internet via a wired connection Re use this CD and the setup ity to connect your other wireless computers Please register your router Register Advanced Tools You can change your network name SSID security type password and more User Manual 6 A progress screen will appear while additional software is installed This may take a few minutes to complete Once finished a Success message will appear indicating that you are connected to the Internet via your new Belkin Router During setup you may be asked for additional information You may need to enter a username and password provided by your ISP This username and password is likely to be found on materials that came from your ISP when you signed up for service If necessary you may need to contact your ISP to retrieve your username and password If you have a static IP address you may need to enter additional information also provided by your ISP
5. also be used to restore the factory default settings Please see the Troubleshooting section for more information E Power Connector Connect the included power supply to this jack TECHNICAL DETAILS Technical Features Integrated ADSL2 Modem The integrated ADSL2 modem allows you to connect to the Internet via your local Internet Service Provider ISP without installing and maintaining a separate DSL modem Integrated 802 11n Wireless Access Point Utilizing Dual Band Network technology your Router creates two separate networks one at 2 4GHz band and the other at 5GHz band allowing increased bandwidth to all your connected wireless devices and computers NAT IP Address Sharing To save you the cost of adding IP addresses per computer in your house your Belkin Router uses Network Address Translation NAT technology allowing you to share a single IP address across your network SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses Universal Plug and Play UPnP Compatibility The UPnP Universal Plug and Play feature in your Router offers seamless operation of voice and video messaging games and other applications that are UPnP compliant Web Based Advanced User Interface You can easily make changes to your Router s advanced settings through your web browser These changes can be made from any computer on your network
6. of your bandwidth to other network applications Bit Boost is found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac 15 Additional Capabilities Guest Access You can allow guests to use your Internet connection without joining your personal network The network name and password for the guest network is located on the network information card found under the foot of your Router A person using your guest network will be able to join without a password but will be shown a login page when they attempt to surf the Web They will need to enter the guest password into this page to continue Video Max Video Max automatically prioritizes your network traffic to ensure high quality streaming video VoIP calls and games Music Mover Music Mover sends music from a USB drive attached to your Router to any UPnP Universal Plug and Play or DLNA compatible device on your network These devices include certain gaming systems televisions Blu ray players and cell phones 16 GETTING TO KNOW YOUR ROUTER Front Panel a b A Router Status Light Your Router s status is shown by the light on the front Off The Router is not plugged into a power source Blinking Green The Router is starting up Solid Green The Router is connected to the Internet Blinking Amber Either the RJ11 cable is not plugged in or there is no signal B Wi Fi Protected Setu
7. on my computer or in Memory Safe Is the light on over the USB port that the disk is plugged into If not try unplugging and re plugging the disk Please check that the USB connector is firmly plugged into the Router 2 If your disk has an optional power supply please use it while the disk is attached to your Router 3 The Router supports FAT16 FAT32 or NTFS formatted disks Disks in other formats will not appear in the Finder Mac OS X or Windows Internet Explorer 28 A printer plugged into the USB port is not showing up on my computer Is the light on over the USB port that the printer is plugged into If not try unplugging and re plugging the printer Please check that the USB connector is firmly plugged into the Router To print to a printer attached to the Router your computer must have that printer s driver installed Please check that the driver is installed The printer may not be set to auto connect Via the Belkin Router Manager open the USB Print and Storage Center Check that the printer appears in the list of available devices View the properties of the printer and check that auto connect is selected A different sort of USB device that plugged into the USB port is not showing up on my computer Most USB devices other than disks and printers must be accessed via the USB Print and Storage Center 1 Is the light on over the USB port that the device is plugged i
8. results place the Router in an open location away from large metal objects and magnets such as those found in speakers Raising the Router above floor level can improve the strength of your wireless signal GETTING STARTI How to Set It Up 1 GETTING STARTED 1 Connect your Router s ADSL cable to your ADSL connection If you are replacing an existing Router or gateway this may require unplugging the existing gateway Note If a telephone is connected to the same telephone jack then an ADSL Splitter Filter is required This can be purchased from your local retailer 2 Plug the Router s power supply into a wall outlet 3 Put the CD into your computer If the CD doesn t open automatically please browse to your CD drive and double click on the Belkin Setup CD icon da Setup 7 Wireless Wireless Router Setup BELKIN Wireless Router Set Up Run this utility when configuring your router for the first time You can also use it to connect Windows and Mac computers to your wireless network Advanced Tools After you ve run the setup change your network name SSID security type password and more gt User Manual 4 Click the Setup icon on the CD menu GETTING STARTED Belkin Setup BELKIN Wireless Router dd BELKIN www belkin com Network Name SSID been Security 2
9. BELKIN Play Max WIRELESS MODEM ROUTER User Manual F7D4401au 8820au00396 TABLE OF CONTENTS Getting aea 1 Whats lt lt 1 KOSTE aS E e EEE EE an eee madsen was 1 Advanced Tools amp aua EAN 6 The Belkin Router T Manual Setup Using Your Browser 8 Adding Computers to Your 9 Adding USB aerea Ee ae e aw 11 SEa EAK 14 1 61116 1151 11 17 151 EAEKO 16 Getting to Know Your 17 ezea dau ETE 17 Back Panel 18 Technical Details lt ERE 19 Technical PAWS a esr zr et eee geren eeen eerren 19 System e ue 20 Troubleshooting Support and Warranty 22 dauala aA 22 giz lag EO 30 Belkin International Inc Limited 3 Year Product Warranty 31 Regulatory Inf FCC Statement EAT ATA a Ee E GETTING STARTED What s in the Box Play Max Wireless Modem Router ADSL cable attached to router Power supply attached to router Network information card attached to router Belkin Setup CD with User Manual Initial Setup Where to Place Your Router For the best
10. ct Family Standards EN 55022 CISPR 22 Electromagnetic Interference EN 55024 1 Electromagnetic Immunity EN 61000 3 2 IEC610000 3 2 Power Line Harmonics EN 61000 3 3 IEC610000 Power Line Flicker EN 60950 1 IEC60950 1 Product Safety Products that contain the radio transmitter are sometimes labeled with the Notified Body number CE0560 or CE alert marking if the standard used in the conformity is not harmonized across the European Community 35 belkin com 2010 Belkin International Inc All rights reserved All trade names are registered trademarks of respective manufacturers listed Mac Mac OS iPhone iPod and Safari are trademarks of Apple Inc registered in the U S and other countries Windows Windows Vista Internet Explorer Xbox 360 and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries
11. d reliability See the section titled Changing the Wireless Channel for instructions on how to choose other channels Limiting the wireless transmit rate Limiting the wireless transmit rate can help improve range and connection stability Most wireless cards have the ability to limit the transmission rate To change this property in Windows go to the Windows Control Panel open Network Connections and double click on your wireless card s connection In the properties dialog select the Configure button on the General tab then choose the Advanced tab and select the rate property Wireless client cards are usually set to automatically adjust the wireless transmit rate for you but doing so can cause periodic disconnects when the wireless signal is too weak as rule slower transmission rates are more stable Experiment with different connection rates until you find the best one for your environment Note that all available transmission rates should be acceptable for browsing the Internet For more assistance see your wireless card s user manual 25 I ve installed this new Router and some of my network clients computers game consoles etc are now unable to connect Your new Router came pre configured with a network name and password found printed on an attached card All clients must use this network name and password to connect wirelessly to your Router You will need to find the network
12. iders If you d like to change these settings without running through the setup process again this is the place The Belkin Router Manager Belkin 2234 Router Settings User Manual USB Print amp Storage Manager Memory Safe Get Started Vuze f Daily DJ Get Started Music Labeler BitBoost Auto gt Check for Updates Options Exit The Belkin Router Manager appears in your system tray Windows or menu bar Mac Its icon indicates the current status of your Router and also allows you to access your Router s settings to make changes It also provides quick access to software that came bundled with your Router To access the Router settings click on the icon and select from the menu that appears The status of your Router is shown by the Belkin Router Manager icon which closely mimics the light on the front of the Router Green You are connected to your Belkin Router and it is connected to the Internet Amber You are connected to your Belkin Router but it is not connected to the Internet GETTING STARTED Manual Setup Using Your Browser Belkin Router Setup Windows Internet Explorer Go http srouter File Edit View Favorites Tools Help f ly Favorites 3 Suggested Sites GO Belkin Router Setup In your browser type http router you do not need to type in anything else such as www Then press the Enter key If you re still having
13. ils 22 Belkin Setup cannot connect my Router to the Internet If Belkin Setup is not able to connect the Router to the Internet please check the following items 1 Use the troubleshooting suggestions within Belkin Setup 2 If your ISP requires a user name and password make sure that you have typed in your user name and password correctly Some user names require that the ISP s domain may be at the end of the name Example myname myisp com The part of the user name may need to be typed as well as your user name 3 If you continue to have no Internet connection refer to Manually Configuring Network Settings in this manual for an alternative setup method Belkin Setup completed installation but cannot browse the Web The light on the front of my Router is blinking amber 1 Make sure the Router is connected to your ADSL line with an RJ11 telephone cable via the Router s one gray ADSL port 2 Check that the modem ADSL connection is connected to your broadband ADSL socket on the wall via an ADSL filter if one is required 3 Unplug your Router s power supply wait 10 seconds and plug it back in This will cause the Router to try to reestablish communication with the ADSL line 23 can t connect to the Internet wirelessly If the light on the front of the Router is solid green then your Router is connected to the Internet You may not be connected
14. l for human contact normal operation is minimized This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the distance between the equipment and the receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the par
15. manual Note Each computer that will use the printer must have both the Belkin software and the printer s driver installed If the print driver is not installed you will be asked to install it by the Belkin USB Print and Storage Manager 12 Adding Other USB Devices Other USB devices may also be shared via your Router Plug your device into the USB port located on the back of your Router When the light above the USB port is lit your device is available to computers on your network Computers running the Belkin USB Print and Storage Manager will be able to make use of the shared device by visiting the USB Print and Storage Manager found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac 13 Bundled Software USB Print and Storage Manager The USB Print and Storage Manager helps to manage and monitor the use of your USB printers scanners hard drives and other devices that are connected to your Router s USB port and shared across your network USB Print and Storage Manager is found in the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac When you have one or more USB devices attached to your Router the main actions for those devices are available directly from the Belkin Router Monitor menu Memory Safe Memory Safe allows you to set up a routine backup of your files to a hard drive or flash drive attached to your Router Memo
16. nto If not try unplugging and re plugging the device Please check that the USB connector is firmly plugged into the Router 2 Via the Belkin Router Manager open the USB Print and Storage Center Check that the device appears in the list of available devices 3 Select the device and click the Use button The device will be virtually connected to your computer until you choose to Stop Using the device or another person requests use of the device 29 Technical Support US http www belkin com support UK http www belkin com uk support Australia http www belkin com au support New Zealand http www belkin com au support Europe http www belkin com uk support Singapore 1800 622 1130 Malaysia 1 800 812 076 India 1800 419 5546 Thailand 0018004413318 Philippines 180014410282 Hong Kong 30021318 China 800 819 0159 Australia 1800 235 546 New Zealand 0800 235 546 Asia email asia support belkin com Korea email koreasupport belkin com Belkin International Inc Limited 3 Year Product Warranty What this warranty covers Belkin International Inc Belkin warrants to the original purchaser of this Belkin product that the product shall be free of defects in design assembly material or workmanship What the period of coverage is Belkin warrants the Belkin product for three years What will we do to correct problems Product Warranty Belkin
17. os Angeles CA 90094 Attn Customer Service or call 800 223 5546 within 15 days of the Occurrence Be prepared to provide the following information a The part number of the Belkin product b Where you purchased the product c When you purchased the product d Copy of original receipt 2 Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim Belkin reserves the right to review the damaged Belkin product All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser If Belkin determines in its sole discretion that it is impractical to ship the damaged equipment to Belkin Belkin may designate in its sole discretion an equipment repair facility to inspect and estimate the cost to repair such equipment The cost if any of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser Damaged equipment must remain available for inspection until the claim is finalized Whenever claims are settled Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have 32 How state law relates to the warranty THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN THERE ARE NO OTHER WARRANTIES EXPRESSED OR EXCEPT AS REQUIRED BY LAW IMPLIED INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY
18. p WPS Light and Button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS enabled Wi Fi devices such as computers To use the WPS feature on your Router see Getting Started gt Adding Computers to Your Network gt Using the WPS Button The small light near the WPS button shows what is happening while you are using WPS to establish a connection Off Idle Blinking Green The Router is listening fora WPS enabled computer or other device Solid Green The Router has made a secure connection with the computer or other device Amber A connection was not created 17 TO KNOW ROUTER A ADSL Connector Connect your Router to your ADSL connection B Wired LAN Connectors Connect computers and other wired network devices to these ports using Ethernet cables C USB Port USB printers disks and other USB devices plugged into this port will be shared on your network Each USB port has light that indicates its status Off No USB device is connected or the attached USB device is not in use Blinking Please wait to unplug the device until the light turns off On The USB device is connected and being shared on your network D Reset Button This button is used to restart your Router in rare cases when it functions incorrectly Resetting the Router will preserve your settings This button may
19. r computers cannot connect to your network try 128 bit or 64 bit WEP or seek software updates from their manufacturers having difficulty setting up Wired Equivalent Privacy WEP security on my Router da Log in to your Router Visit http router with your web browser Click on the Login button in the top right hand corner of the screen You will be asked to enter your password If you have never set a password leave the Password field blank and click Submit Click Wireless in the left hand menu Then click Security just below that Select the 128 bit WEP option You may type in a WEP key manually or generate one from a passphrase a phrase the field click the Generate button A WEP key is composed of 26 hexadecimal digits 0 9 A F For example OF AF 4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128 bit WEP key 27 5 Click Apply Changes to finish Your wireless activity is now encrypted Each computer using your wireless network will need to use the new key Note If you are configuring the Router over a wireless connection you will have to re connect to the Router after changing any security settings Note Some older networking hardware supports only 64 bit WEP encryption If your older computers cannot connect to your network try 64 bit WEP A disk plugged into the USB port is not showing up
20. ry Safe is found in the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac Music Labeler Belkin Music Labeler corrects metadata track names artist names track numbers etc in your iTunes and Windows Media libraries making it easy to find the music you are looking for Music Labeler is found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac 14 Daily DJ Belkin Daily DJ delivers personalized playlists from your music collection automatically every day It s like having your own personal DJ playing the songs that you want to hear It works great with iTunes and Windows Media Player Daily DJ is found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac Vuze and Torrent Genie Vuze is a media player for high resolution digital videos that helps you to find download and play HD videos on your PC Mac iPhone iPod Xbox 360 PS3 PSP and TiVo Torrent Genie assists your Vuze downloads by continuing them in the background when your computer is asleep or offline It requires that a USB hard drive or flash drive be plugged into your Router Bit Boost Bit Boost allows you to improve the quality of a particular activity when your network is in heavy use For instance if you use your network for voice over IP VoIP calls you can set Bit Boost to support this feature first and allocate the remainder
21. settings on your client select the network name printed on the card from the list of available networks and enter the password when prompted to join the wireless network Does the Router support Wireless Protected Access WPA security The Router ships with WPA WPA2 security turned on Windows XP and some older network hardware may require a software update to support WPA WPA2 having difficulty setting up WPA security my Router 1 Log in to your Router by visiting http router with your web browser Click on the Login button in the top right hand corner of the screen You will be asked to enter your password If you have never set a password leave the Password field blank and click Submit Click Wireless in the left hand menu Then click Security just below that EA Select the WPA WPA2 option 4 Enter a password This can be from 8 63 characters of your choice including spaces and punctuation OR a 64 digit hexadecimal number using only the numbers 0 9 and letters 26 5 Click Apply Changes to finish Your wireless connection is now encrypted Each computer using your wireless network will need to use the new key Note If you are configuring the Router over a wireless connection you will have to re connect to the Router after changing any security settings Note Some older networking hardware supports only WEP encryption If your olde
22. to the Router s wireless network Please refer to Adding Computers to Your Network in this manual for instructions can t connect to the Internet wirelessly and network name is not listed in Available Networks 1 Verify that your Router is on and the front panel light shows solid green If you are far from the Router you might try moving closer to see if you might have been out of range Using a computer attached to the Router via a network cable visit http router and ensure that Broadcast SSID is ON This setting is found on the Channel and SSID page 24 My wireless network performance is slow inconsistent suffers from weak signal or I m having difficulty maintaining a VPN connection Wireless technology is radio based which means connectivity and the throughput performance between devices decreases when the distance between devices increases Other factors that will cause signal degradation metal is generally the worst culprit are obstructions such as walls and metal appliances Note also that connection speed may decrease as you move farther away from the Router In order to determine if wireless issues are related to range we suggest temporarily moving the computer within 10 feet from the Router if possible Changing the wireless channel Depending on local wireless traffic and interference switching the wireless channel of your network can improve performance an
23. trouble running the manual setup option type 192 168 2 1 in your browser you do not need to type in anything else such as http or www Then press the Enter key Adding Computers to Your Network Wireless devices such as computers network printers and gaming systems can connect to your Router with a few simple steps Using the CD 1 Put the Setup CD into your computer If the CD doesn t open automatically browse to your CD drive and open the Belkin Setup CD icon 2 Click the Setup icon on the CD menu 3 After a brief installation the setup software will ask you for the network name and password from the network information card that came with your Router This card is most likely now located underneath the foot of your Router in the provided card slot 4 A progress screen will appear while additional software is installed This may take a few minutes to complete Once finished a Success message will appear indicating that you are connected to the Internet via your new Belkin Router Note The setup software runs only on Windows and Mac OS X systems Manually If you choose not to use the included Setup CD for adding additional computers or wireless devices you can manually add these items to your network 1 Locate the wireless network connections option on your computer or wireless device 2 Select your Belkin Router from the list of available networks You can identify
24. ty responsible for compliance could void the user s authority to operate this equipment This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter 34 Canada Industry Canada The wireless radio of this device complies with RSS 139 amp RSS 210 Industry Canada This Class B digital apparatus complies with Canadian ICES 003 Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Cet appareil num rique de la classe B conforme norme NMB 003 du Canada Europe European Union Radio products with the CE or CE alert marking comply with the R amp TTE Directive 1999 5 EC issued by the Commission of the European Community Compliance with this directive implies conformity to the following European Norms in brackets are the equivalent international standards e EN 60950 1 2006 IEC60950 1 Product Safety e EN 300 328 Technical requirement for radio equipment ETS 301 489 General EMC requirements for radio equipment Information Products with the CE marking comply with the EMC Directive 2004 108 EC and the Low Voltage Directive 2006 95 EC issued by the Commission of the European Community Compliance with these directives implies conformity to the following European Produ
25. vices 11 Adding a Drive You can share a USB hard drive or flash drive to your network via your Router s USB port Once connected you can share files and music with other computers and devices within your network Plug your USB hard drive into the USB port on the back of your Router When the light above the USB port is lit your drive is available to computers on your network You can manually check the status of your shared drive by visiting the USB Print and Storage Manager found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac If you have difficulty sharing a drive on your network please see the Troubleshooting section of this manual Adding a Printer You can add a printer to your network via your Router s USB port Once connected you can print from various computers and wireless devices within your network Plug your printer s USB cable into the USB port located on the back of your Router When the light above the USB port is lit your printer is available to computers on your network You can manually check the status of your printer by visiting the USB Print and Storage Manager found under the Belkin Router Manager icon displayed in your system tray Windows or menu bar Mac If you have difficulty sharing a printer on your network please see the Troubleshooting section of this
26. will repair or replace at its option any defective product free of charge except for shipping charges for the product Belkin reserves the right to discontinue any of its products without notice and disclaims any limited warranty to repair or replace any such discontinued products In the event that Belkin is unable to repair or replace the product for example because it has been discontinued Belkin will offer either a refund or a credit toward the purchase of another product from Belkin com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use What is not covered by this warranty All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin s request at the sole expense of the purchaser or if Belkin determines that the Belkin product has been improperly installed altered in any way or tampered with The Belkin Product Warranty does not protect against acts of God such as flood lightning earthquake war vandalism theft normal use wear and tear erosion depletion obsolescence abuse damage due to low voltage disturbances i e brownouts or sags non authorized program or system equipment modification or alteration 31 How to get service To get service for your Belkin product you must take the following steps 1 Contact Belkin International Inc at 12045 Waterfront Drive L
27. your Belkin Router by locating the network name SSID from the card located underneath the foot of your Router 3 Enter your network password located on your network information card Your wireless device will take a few moments to connect to your network If the connection is not made the first time try this process again If you still have difficulty connecting to your network after trying this process a few times see the Troubleshooting section in this manual for help with connecting to your network Note In some cases you may be prompted to select the security type It is printed on the card for your convenience Using the WPS Button 1 2 Start WPS Push Button Connection WPS PBC on your computer or other Wi Fi device that you would like to connect wirelessly to your Router Often there will be a button for this purpose in software that came with the device or a physical WPS PBC or Security button on the device itself Within two minutes press the WPS button on your Router The WPS light small light above WPS button will blink green while it listens for your Wi Fi device Once a connection is established the light will turn green and then go out If a connection is not established the light will blink amber You may repeat the process to try again You can repeat this process for each WPS enabled device you d like to add to your network 10 GETTING STARTED Adding USB De
28. z or higher processor 1GB of RAM Safari or Firefox 200MB of free hard drive space for installation 21 TROUBLESHOOTING SUPPORT AND WARRANTY Troubleshooting The Setup CD does not automatically start If Belkin Setup does not run when you insert the CD ROM your computer may not be configured to open CDs automatically If Belkin Setup does not appear within 15 seconds browse to your CD ROM drive and open the Belkin Setup icon Alternatively you may visit http router and perform the setup manually Please see Manual Setup Using Your Browser earlier in this manual for more information Belkin Setup cannot find my Router If Belkin Setup is not able to communicate with your Router during the installation process please check the following items 1 Make sure that the wireless hardware on your computer is turned on if available 2 Try connecting your computer to one of the four wired ports on the Router with an Ethernet cable 3 Ensure that the Router is on The front panel light should be on 4 Unplug the Router s power supply for 10 seconds then plug it back in 5 There may be firewall software on your computer preventing an outgoing connection You may choose to temporarily disable this software before attempting setup If Belkin Setup still cannot find the Router you might choose to do a manual setup Refer to Manually Configuring Network Settings in this manual for deta
Download Pdf Manuals
Related Search