Origin Storage 1USHL-115 rack accessory
Contents
1. Medium Duty Sliding Shelf for 4Post and 2Post Racks Installation Instructions Kit P N 1USHL 115 4Post Kit P N 1USHL 015 2Post Kit Contents 1 Partially Assembled Shelf 1 Anti Slip Mat 12 x15 1 50 Velcro Strap for Cable Arm Brackets Assembly Hardware Kit 4 8 32 x 3 8 Flat Head Screws 6 8 32 x 3 8 Pan Head Screws 6 8 32 Nuts 3 2 5 Clevis Pins amp Cotter Pins for Cable Mgmt 2 Rear Rack Brackets 1 Removable Front Stop 1 Adjustable Rear Stop Rack Mount Hardware Kit 1 Arm Extension Bracket B ae x u Serowe 2 Cable Management Arms Me X cs 2 Arm Attachment Brackets 8 24 Square Nuts 8 10 32 Cage Nuts 1USHL 015 Adds 2 3U Tall 2Post Brackets see Page 8 12 12 24 Bolts for Relay Racks Installation Instructions Step 1 Mounting Depth Measure the Mounting Depth for your rack from the front of the Front Mounting Surface to the back of the Back Mounting Surface Go to Step 2 or Step 3 based on the measurement 4Post Cabinet Double 2Post m 1 mm mo FRONT REAR FRONT REAR L LJ L P MOUNTING DEPTH MOUNTING DEPTH a Step 2 23 5 to 31 5 The Rear Rack Brackets will be installed as shown below for this Mounting Depth range P Mounting Depth 23 5 31 5 gt Step 3 15 5 to 23 5 The Rear Rack Brackets will be installed as shown below for t2. his o Oo q _ Mounting Depth 15 5 23 5 gt Reversed Rear Rack Bracket Page 2 Installation Instructions Step 4 Rear Bracket Attachment Move the slide rails back approximately 8 You may need to loosen the thumb screws to do this Attach the Rear Rack Brackets and the Cable Arm Extension as shown below Attach using 4 8 32 x 3 8 Pan Head Screws and 4 8 32 Nuts The screws should be located in the slots as far apart from one another as possible see below Tighten all screws The Cable Arm Extension can be attached to the right or left based on your cabling needs Screws Located Far Apart Cable Arm Extension Rear Rack Bracket Rear Rack Bracket Installation Instructions Step 5 Cable Management Attach the two Arm Attachment Brackets to the back of the Shelf as shown below Attach using 4 8 32 x 3 8 flat head screws Tighten all screws Note Cable management may be installed on opposite side Arm Attachment Bracket Arm Attachment Bracket Page 4 Installation Instructions Step 6 Cable Arms Attach the two Cable Management Arms using three 2 5 clevis pins Note Cable management may be installed on opposite side Clevis Pins amp Cotter Pins a SS 5 Installation Instructions Step 7 Rack Installation Attach the front and back of the Shelf to the rack Hard
3. it Center Mount Flush Moun Warranty Statement Innov nts our 1 year from the date of purchase ation First Inc warra repairing or replac sv 2 2 n c o E o T ia o 7 oO g o E N 2 O g me 5 n ol D oO n 2 oO ne fe a ation First Inc liability shall be limited to Innov period of one any defective product ing at our option
4. ware is provided for square hole racks 12 24 Screw Cage Nut threaded hole racks 10 32 or 12 24 screws or unthreaded hole racks 12 24 screws and nuts Tighten all screws Special Note The right hand and left hand thumb screws must be engaged and must be tight before tightening the front rack mount screws 90000000 l Te Tighten Thumb Screws First O OO0O oBOM gt o 00 Tighten Rack Screws Second Rear View O0000000l o ooooo n o of Je ey o Gocco s Page 6 Installation Instructions Step 8 Server Installation Pull the shelf out of the rack until it stops Attach the Removable Front Stop shown below to the front of the shelf Place the Anti Slip Mat on the shelf Put the server or other equipment on the shelf and move forward against the Front Stop Step 9 Rear Stop Attach the Adjustable Rear Stop tight against the back of the equipment to keep the equipment from moving on the shelf Attach the Adjustable Rear Stop to the shelf using 2 8 32x1 2 Pan Head Screws and 2 8 32 Nuts Adjustable Rear Stop Anti Slip Removable Front Stop Page 7 Installation Instructions 2Post Installations require the 1USHL 015 k
Download Pdf Manuals
Related Search