Wentronic Bluetooth Headset stereo (Calypso)
Contents
1. Benutzerhandbuch User Manual Manual d utilisation Modo de uso Manual User Manuale dell utente Disclaimer The information in this document is subject to change without notice The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes Trademark Recognition Bluetooth is a trademark of the Bluetooth SIG Inc Special Interest Group The Bluetooth trademark is owned by Bluetooth SIG Inc USA Motorola is a trademark or registered trademark of Motorola Inc RealPlayer is a trademark or registered trademark of RealNetworks Inc Samsung is a trademark or registered trademark of Samsung Inc Other product names used in this manual are the properties of their respective owners and are acknowledged FCC Information This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this devi ce must accept any interference received including interference that may cause undesired operation Federal Communications Commission FCC Statement This Equipment has been tested and found to comply wi2. ack you want to listen to Press the left side of the SKIP button to go to the previous track Press the right side of the SKIP button to go to the next track Appendix Troubleshooting Try the following if the Headset does not work e Ensure connecting devices are charged Turn off all devices and then turn them on again in the order shown in this guide e Ensure devices are within the 10 meter 33 feet range e Ensure no obstructions such as concrete walls are between connecting devices If the Headset is still not working after trying the above pack the Headset in the original package and return the package to your reseller Button Function Table Function Device Status Operation Power On the device Power On the device Long press for 5 sec Power Off the device Standby Long press and hold for more than 4 sec Pairing the device Off Long press and hold for more than 7 8 sec Function Device Status Operation Answer Call Ringing Press less than 1 sec End Call Talking Press less than 1 sec Reject Call Ringing Press for 2 sec Voice Dialing Standby or Double click within 0 5 sec Disconnection Last Number Redialing Standby or Disconnection Press for 2 sec Volume Up Talking or Play Music Press less than 1 sec Volume Down Talking or Play Music Press less than 1 sec Music Playing Stop or Pause Press less t
3. er Europe EU Declaration of Conformity This device complies with the specifications EN 300 328 EN 301 489 and EN 60950 1 following the provisions of the R amp TTE Directive Table of Contents Getting Started with the Headset Unpacking and Checking the Contents Identifying Components Headset Parts Headset Status LEDs Main Functions Charging the Headset Batteries Charging with the USB Cable Charging with the Travel Adapter Folding and Unfolding the Headset Operation Pairing with a Bluetooth Enabled Phone Answering Calls Rejecting Calls Voice dial Ending a Call in Progress Re dialling Listening to MP3s on your Phone Adjusting the Volume Skipping Tracks Appendix Troubleshooting Button Function Table Specifications 25 26 27 About This Manual This manual provides information for setting up and configuring the Headset This manual is intended for home users Safety Information Only use the supplied travel charger Do not place anything on the power cord Place the power cord where it will not be in the way of foot traffic Before cleaning the Headset disconnect the travel charger Getting Started with the Headset Congratulations on your purchase This section covers unpacking the Headset and identifying components Unpacking and Checking the Contents Headset USB Cable Quick Guide If any item is missing or damaged repack the Headset and return it to your reseller Identifying Component
4. han 1 sec Pause Music Playing Playing Music Press less than 1 sec Forward Playing Playing Music Press I less than 1 sec Backward Playing Playing Music Press lt a less than 1 sec Note The The function works only when the mobile phone supports Handsfree Profile Specifications General Radio BT V 2 1 EDR Class 2 up to 5 10 meters open space Operating range Depends on paired phone model battery power and environmental factors Carrier Frequency 2 402 2 480 GHZ Data Rate 1 Mbit s Spread Spectrum FHSS Frequency Hopping Spread Spectrum Auto switching While listening to music you can receive or make a phone call with a paired mobile phone S N Ratio gt 88 dB nput Power 5V 500mA AC adapter Listening talking Time Up to 18 hours factors such as distance between devices and type of mobile phone used increase power consumption Weight 80 grams O port Mini USB jack power adapter Microphone Built in microphone for mobile phone use Built in Battery 3 7V 400mAh Li Polymer rechargeable Battery Life Up to 18 hours Dynamic Power Management Automatically power control for power consumption Operating Temperature 0 bis 50 C Operating Humidity 0 to 95 non condensing
5. ing Pairing a call Rejecting Calls When your phone rings press Pair answer button until ringing stop Voice dial dial by calling a name 1 turn on headset and pair it with your telephone if not done already 2 Press answering key twice in short sequence until you can hear a du du tone 3 Now clearly say the name of the person you want to call 4 Your phone dials the requested number Note The voice deal function can only be used if your mobile telephone supports voice deal The according voice pat tern has to be stored Re dialling By pressing the answering key for one second the re dialling function is activated After hearing the Duuuuu tone your telephone dials the last dialed number Ending a Call in Progress While a call is in progress press answer on the Headset to end the call Listening to Music on your Phone Many phones allow you to store and play Music on your phone You can pair the Headset with your phone and listen to music through the Headset Refer to the user manual with your phone for details Adjusting the Volume Push the volume up and down buttons on the Headset to adjust the volume while you are listening to music Press the left side of the volume button to decrease the volume Press the right side of the volume button to increase the volume Skipping Tracks While listening to music on your phone use the SKIP button on the Headset to skip forward or backward to find the tr
6. s The following illustration shows the Headset parts Press to turn on off Headset Parts Press to pairing with an Bluetooth device Press to answer incoming call Press to finish a call Microphone Next Previous USB port Reset Button Status LED Link LED Volume down oon oO oO F WD Volume up Headset Status LEDs Main Functions Link Color Function Status Color Function LED LED Blue flashing slowly Power on Red Charging Blue Red flashing slowly Connected to device Red off Charging complete Charging the Headset Batteries The Headset has a built in rechargeable battery Batteries can be charged through the USB cable or the travel charger Charging with the USB Cable Refer to the following to charge the Headset with the USB cable 1 Connect the small connector on the USB cable to the Headset 2 Connect the other end of the cable to a USB connector on your computer The Power LED lights amber to indicate charging 3 Unplug the USB cable when the Power LED is off NOTE Most notebook computer USB connectors are horizontal The USB cable should be connected with the USB icon facing up If the USB connector on your computer is vertical connect the cable carefully to avoid damaging the connectors Charging with the Travel Adapter optionally Refer to the following to charge the Headset with the travel adapter 1 Connect the small connector on the USB cable to the Head
7. set 2 Connect the adapter to an electrical outlet The Power LED lights red to indicate charging 3 Unplug the USB cable when the Power LED is off NOTE The travel adapter can be used with 110V and 220V auto switching If you need to use a socket adapter be sure the adapter is correctly grounded for your location Folding and Unfolding the Headset You can fold the Headset for easier storage Refer to the following illustration to fold or unfold the Headset Operation This section covers pairing the Headset with your mobile phone to answer calls or to listen to MP3 audio files Pairing with a Bluetooth Enabled Phone Refer to the following steps to pair the Headset with a Bluetooth enabled phone Important Bluetooth must be enabled on your mobile phone to use this function Refer to your phone s user manual for instructions on enabling Bluetooth 1 Press and hold Pair on the Headset for seven seconds The link and status LED flashes alternately 2 Scroll to Bluetooth in the menu of your phone and look for a setting such as active device 3 Select Calypso when it appears in the phone menu 4 When prompted type in the default password 0000 The link LED lights blue when you are connected Answering Calls Refer to the following to answer a call 1 When your phone rings press answer on the Headset 2 Adjust the volume as you want i 3 Press answer to end your call Answer End
8. th the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guaran tee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment Tested to comply with FCC standard FOR HOME OR OFFICE USE Warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment amp This device and its antenna s must not be co located or conjunction with any other antenna or transmitt
Download Pdf Manuals
Related Search