Home

Samsung LE-46C650 46" Full HD

Contents

1. So 1 Connect the HDMI IN 1 DVI 2 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD satellite box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV Connect only one Home Theatre e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions e Anynet works when the AV device supporting Anynet is in the standby or on status e Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list Recording recorder Starts recording immediately
2. T SERIES O w Contact SAMSUNG WORLDWIDE E If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre 2 Country Customer Care Centre amp Web Site 3 EIRE 0818 717 100 www samsung com U K 0845 SAMSUNG 7267864 www samsung com S S Thank you for purchasing this Samsung product To receive more complete service please register your product at A www samsung com register ce Model Serial No BN68 02558K 01 2010 Samsung Electronics Co Ltd All rights reserved Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Digital TV notice Functionalities related to Digital TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T or DVB C signal DVB T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast ransmission of digital TV over cable However some differentiated features like EPG Electric Programme Guide VOD Video On Demand and so on are not included in this specification So they canno
3. MENU button Displays the main on screen menu ENTER C4 Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu EXIT button Exits the on screen menu E J ig NOO ORAON oo 00 English 9 Basic Features The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll lt gt to view information for a desired programme while watching the current channel e Scroll A V to view information for other channels If you want to move to the currently selected channel press the ENTER C button abel 48 11 Thu 6 Jan Life On Venus Avenue 18 00 6 00 mmm DTV Air 15 e y Watch lo Detail formation Information Guide The EPG Electronic Programme Guide information is provided by broadcasters GUIDE Using programme schedules provided O by broadcasters you can specify D programmes you want to watch in AR advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Using Channel View DTV Air 800 five Home and Away 18 00 18 30 Drama Dani is devastated when scott makes clear his views on marriage 19 00 20 0
4. 26 Engish Network Setup PBC WPS How to set up using PBC WPS If your router has a PBC WPS button follow these steps 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the Aor Y button to select Setup and then press the ENTER C button 3 Use the AorY button to select Network in the Setup menu and then press the ENTER C button 4 Onthe Network screen select Network Type 5 Set Network Type to Wireless 6 Select Network Setup The Network Setup screen appears Select a network Not Selected gt Internet Protocol Setup Auto IP Address eee g Subnet Mask BE Gateway Ef DNS Auto DNS Server A E E fo Move Enter 9 Return 7 Press the Red button on your remote Press the PBC WPS button on your router within 2 minutes Your TV player automatically acquires all the network setting values it needs and connects to your network 9 After the network connection is set up press the RETURN button to exit the Network Setup screen Network Setup Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for
5. Please find a R icon on the rear of the TV R Ea 9 A kensington slot is beside the fa icon 0O ka To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair lt Optional gt 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock amp These are general instructions For exact instructions see the User manual supplied with the locking device Securing the TV to the Wall Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows To avoid the TV from falling amp Since the necessary clamps screws and string are not supplied please purchase these additionally 1 Drive the screws into the clamps and firmly fasten them onto the wall Make sure the screws are firmly fixed into the wall _ Screw Specifications e For a 32 40 Inch LCD TV M6 For a 46 55 Inch LCD TV M8 2 Remove the screws from the centre back of the TV put the screws into the clamps and the
6. The Y symbol will be displayed and the channel will be set as a my channel 1 Select a channel and press the TOOLS button 2 Add or delete a channel in the my channel groups you want among 1 2 3 and 4 One or more groups can be selected 3 After you have changed the settings the channel list for each group can be viewed in My Channels Vial 1futech V2 24ore tv Edit My Channels Lock Radio Delete Data Other 23 EEEN 3 Select Al Analogue 32 sgjeuueyuD Class News Coming Soon Discovery Engish L1 sounyee4 oiseg g0 Basic Features l Retuning channels Antenna Air Cable Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system Country The PIN input screen appears Enter your 4 digit PIN number E Digital Channel Change the country for digital channels H Analogue Channel Change the country for analogue channels Auto Store Scans for a channel automatically and stores in the TV amp Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Child Lock function the PIN input window appears H Antenna Source Air Cable Select the antenna source to memorise E Channel Source Digital amp Analogue Digital Analogue Select the channel source to mem
7. To install a wall mount from another manufacturer use the Holder Ring D Installing the Wall Mount Kit Wall mount items sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the Wall Mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Engish 45 Other Information D Wall Mount Kit Specifications VESA amp wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury NOTE Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or he consumer fails to follow the product installation instructions Standard dimensions for wall mount kits are shown in the table below e When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws longer than the standard dimension as they may cause damage to the inside of the TV set e For wall mounts that do not comply with the VESA standard screw specificatio
8. standard Press the volume button on the TV When the OSD volume is displayed press and hold MENU for 5 sec Press the A or Y button then press the ENTER C button Select the appropriate country If the desired country does not exist on the menu select Others After selecting the country in the Country menu some models may proceed with an additional option to setup the pin number amp When you input the PIN number 0 0 0 0 is not available Press the A or Y button then press the ENTER C button Select Air or Cable Press the A or Y button then press the ENTER C button Select the channel source to memorise When setting the antenna source to Cable a step appears allowing you to assign numerical values channel frequencies to the channels For more information refer to Channel Auto Store P 12 amp Press the ENTER CY button at any time to interrupt the memorization process Set the Clock Mode automatically or manually The connection method for the best HD screen quality is displayed Press the ENTER C button If You Want to Reset This Feature Select Setup Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 If you want to change the PIN number use the Change PIN function 6 English Connections Connecting to an AV Device Using an HDMI DVI Cable HD connection up to 1080p Available devices DVD Blu ray player HD cable box HD ST
9. Connecting to an Antenna Plug amp Play Initial Setup Getting Started aOoa rs A N Connecting to an AV Device Connecting to an Audio Device 9 Changing the Input Source Connections 00 Basic Features 9 How to Navigate Menus 10 Using the INFO button Now amp Next guide 10 Planning Your Viewing 12 Channel Menu 13 Picture Menu 16 Sound Menu 18 Setup Menu 20 Support Menu Advanced Features 22 Connecting to a PC 23 Network Connection 29 Media Play 36 Anynet 39 Internet TV 42 AllShare Other Information 44 Analogue Channel Teletext Feature 45 Installing the Wall Mount 46 Assembling the Cables 47 Anti Theft Kensington Lock 47 Securing the TV to the Wall 48 Troubleshooting 51 Specifications 52 Index 53 Warning Important Safety Instructions 54 Wiring the Mains Power Supply Plug UK Only 54 Warranty Card Check the Symbol zg This function can be used by One Touch Button pressing the TOOLS button on the remote control English 3 Getting Started Accessories Please make sure the following items are included with your LCD TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Owner s Instructions e Power Cord a Q 46 55 inch TVs e Blanking Bracket e Cable tie e Holder Ring 4ea See separate guide for installing the stand M4 X L12 e
10. HP L4 0 Sound System BG OK NICAM MPEGI HDMI IN 1 4 Video 1080 24p 1080p 1080i 720p 576p 576i 480p 480i Audio Two Channel Linear PCM 32 44 1 48 kHz 16 20 24bits Analogue audio input HDMI IN1 only PC Input Stand Swivel Left Right 20 20 LE382C650 LE40C650 LE46C650 Model Name LE39C652 LE387C650 LE40C652 LE46C652 LE55B650 Screen Size Diagonal 32 inch 37 inch 40 inch 46 inch 55 inch Sound Output 10W X2 15W X 2 Dimensions WxDxH Body 789 2 X 77 8 X 509 9 mm 907 6 X 78 5 X 574 4 mm 976 2 X 80 4 X 614 9 mm 1108 6 X 80 3 X 689 7 mm 1301 6 X 85 3 X 801 2 mm With stand 789 2 X 240 X 555 9 mm 907 6 X 255 X 621 2 mm 976 2 X 255 X 659 3 mm 1108 6 X 275 X 734 5 mm 1301 6 X 305 X 845 3 mm Weight Body 9 1 kg 11 6 kg 14 3 kg 18 1 kg 28 1 kg With Stand 11 8kg 15 kg 17 7 kg 21 9 kg 32 7 kg LE382C653 LE40C0653 LE46C653 Model Name LE32C654 LE40C654 LE46C654 Screen Size Diagonal 32 inch 40 inch 46 inch Sound Output 10W X 2 Dimensions WxDxH Body 794 5 X 77 8 X 495 4 mm 981 5 X 80 4 X 598 5 mm 1113 9 X 80 3 X 674 1 mm With stand 794 5 X 240 X 558 6 mm 981 5 X 255 X 661 9 mm 1113 9 X 275 X 737 1 mm Weight Body 9 3 kg 13 5 kg 18 1 kg With Stand 12 kg 16 9 kg 21 9 kg amp Design and specifications are subject to change without prior notice amp For the power supply and power consumption refer to the label attached to the product Engish 5
11. e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details N Gad e ore Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product amp When using a stand or wall mount use parts provided by Samsung Electronics only e Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp The appearance may differ depending on the product Installation with a stand Installation with a wall mount 10 cm J 10cm Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or hum
12. 000 108 000 VESA DMT 1280 x 1024 63 981 60 020 108 000 1280 x 1024 79 976 75 025 135 000 1280 x 800 49 702 59 810 83 500 ft 1280 x 800 62 795 74 934 106 500 J 1280 x 960 60 000 60 000 108 000 1280 x 720 45 000 60 000 74 250 1360 x 768 47 712 60 015 85 500 1440 x 900 55 935 59 887 106 500 1440 x 900 70 635 74 984 136 750 Ht 1600 x 1200 75 000 60 000 162 000 1680 x 1050 65 290 59 954 146 250 Ht 1280 x 720 52 500 70 000 89 040 Te VESA GTF 1280 x 1024 74 620 70 000 128 943 A VESA DMT DTV CEA 1920 x 1080p 67 500 60 000 148 500 f NOTE For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported 22 English Network Connection You can set up your TV so that it can access the Internet through your local area network LAN using a wired or wireless connection Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable See the diagram below sounjee4 peoueapy vO The Modem Port on the Wall External Modem TV Rear Panel ADSL VDSL Cable T Modem Cable LAN Cable e You can attach you
13. CONNECTIONS COMMON INTERFACE Slot To watch paid channels the Cl or Cl CARD must be inserted If you do not insert the Cl or Cl CARD some channels will 7 a 7 e display the message Scrambled Signal The pairing information containing a telephone number the Cl or Cl CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider When the configuration of channel information has finished the a hooo naD a ESE message Updating Completed is displayed indicating the channel list is updated NOTE 8 e You must obtain a Cl or Cl CARD from a local cable service provider e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it Insert the Cl or Cl CARD in the direction marked on the card The location of the COMMON INTERFACE slot may be different depending on the model Cl or Cl CARD is not supported in some countries and regions check with your authorized dealer If you have any problems please contact a service provider English Changing the Input Source Edit Name 5 m E VCR DVD Cable STB Satellite STB PVR STB O Source List AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name z Use to select TV or
14. HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function Screen Mode 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size Q Not available in PC Component or HDMI mode Digital Noise Filter Off Low Medium High Auto Auto Visualisation When the broadcast signal is weak some static and ghosting may appear Select one of the options until the best picture is displayed sounyee4 oiseg g0 Auto Visualisation When changing analogue channels displays signal strength Qy Only available for analogue channels Q When bar is green you are receiving the best possible signal MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide an improved picture quality Disabled under PC mode HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality amp Available in TV AV COMPONENT 480i 1080i and HDMI 480i 1080i Motion Plus Off Clear Standard Smooth Custom Demo Removes drag from fast scenes wi
15. Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E ECO Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room A it you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When ECO sensor is On the minimum screen brightness can be adjusted manually amp Q If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity E No Signal Power Off Off 15 min 30 min 60 min Activates the Stand by mode in the case of No Signal or Check Signal Cable status for a certain period of time defined by the user amp Disabled when the PC is in power saving mode D Changing the Picture Options Advanced Settings available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast in PC mode you can only make changes to Dynamic Contrast Gamma and White Balance Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail 0 Gamma 20 Expert Pattern Off RGB Only Mode Off E Colour Space Native a bad Move Enter 5 Return E Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Dynamic Contrast Off Low Medium High Adjust the scre
16. P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel H Editing channels Channel Manager Option Menu in Channel Manager 1 Select a channel and press the TOOLS button 2 Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu E Edit Channel Name analogue channels only Assign your own channel name E Edit Channel Number digital channels only Edit the number by pressing the number buttons desired i Other Features Cable Search Option depending on the country Sets additional search options such as the frequency and symbol rate for a cable network search E Freq Start Freq Stop Set the start or stop frequency differs in each country H Modulation Displays available modulation values H Symbol Rate Displays available symbol rates Channel Manager Option Menu in Channel Manager Set each channel using the Channel Manager menu options Lock Unlock Timer Viewing Sort Delete Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings E Lock Unlock Lock a channel so that the channel cannot be selected and viewed NOTE e This func
17. TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion 48 Engish Issues Solutions and Explanations No Picture No Video The TV will not turn on Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is no on refer to The remote control does not work below the remote If the TV turns The TV turns off automatically Ensure the Sleep Timer is set to Off in the Setup menu P 18 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and When watching TV from an antenna or cable connection the TV will turn o there is no signal he TV after 10 15 minutes if UO PEULIOJU ABYIO 90 There is no picture video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connect to an HDMI input on th
18. control button channel or volume on the mobile phone the value will only go up or down by one unit Engish 43 s n e 4 peoueApy vo Other Information The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change Teletext pages by pressing the numeric buttons on the remote control o A Teletext on mix of Activate the Teletext mode after selecting the channel providing the Teletext service Press it twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext page up Display the next eletext page page down Display the previous Teletext page index Display the index contents page at any time while you are viewing Teletext 2 store Store the Teletext pages size Display the double size letters on the upper half of the screen For the lower half of the screen press it again To display the normal screen press it once again reveal Display the hidden text answers to quiz games for example To display the normal screen press it again EX cancel Display the current broadcast when searching for a system is used by a broadcasting company the different topics covered on a Tele
19. e 4 peoueApy vo Advanced Features Photos Viewing a Photo or Slide Show 1 Press the lt or gt button to select Photos then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired photo in the file list GB f E gt Normal 3 Press the ENTER C button or gt Play button While a photo list is displayed press the gt Play ENTER C button on the remote control to start slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order from currently being shown Music files can be automatically played during the Slide Show if the Background Music is set to On amp The BGM Mode cannot be changed until the BGM has finished loading D Playing the multiple files Playing the selected video music photo files 4 Pause 4p Previous Next 4 Tools 5 Return 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files D Videos IMovie 01 avi 2files selected 1 1 Page NOTE The v mark appears to the left of the selected files e To cancel a selection press the yellow button again pega To deselect all selected files press the TOOLS button and i Jan 10 2010 select Deselect All 3 Press the TOOLS button and select Play Selected Contents Playin
20. i i nd oti F6 When the ON OFF light button is set to ON and a certain button is pressed the remote control buttons will be lit for a moment Using the remote control with this button set to On will reduce the battery usage time Displays and selects the available video sources P 9 AIT Returns to the previous channel PRE CH A Adjusts the volume lectin Cuts off the sound temporarily Changes channels P Vv eal 7 Displays channel list on the screen P 13 Displays the main on screen menu P 9 GUIDE mill bid ja Displays information on the TV screen P 10 gt Displays the Content View which includes Displays the EPG Electronic P Guide Guide Internet TV Media Play and AllShare YS Seer Electronic Programme Guide P10 Quickly selects frequently used functions Selects on screen menu items and change menu values Returns to the previous menu Exits the menu Buttons in the Channel Manager Internet TV Media Play menu etc MEDIA P Views the Media play P 29 INTERNET Links to various Internet services P 39 DUAL l Il Selects sound mode P 17 AD Audio Description selection Not available in some locations P 17 P SIZE Choose the picture size P 15 SUBT Digital subtitle display P 19 Use these buttons in the Media Play and Anynet modes P 29 36 L controls recording on Sa
21. if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitabl y approved extension lead or consult your dealer for assistance However if there is no alternative but to cut off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW Warranty Card N7 iN UNITED KINGDOM This Samsung product is warranted for a period of twelve 12 months from the original date of purchase against defective materials and workmanship In the event that warranty service i
22. is not supported Video Decoder Audio Decoder e Supports up to H 264 Level 4 1 e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not e supported e XVID MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max e GMC 2 over is not support e H 263 is not supported e Only Samsung Techwin MJEPG is supported e Supports up to WMA 7 8 9 STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio e WMA sampling rate 22050Hz mono is not supported 32 Engish Playing movie file continuously Resume Play If you exit the playing Videos function it can be played later from the point where it was stopped amp f you will press the ENTER C button during playing the file you can explore scene divided into 5 chapters you want 1 Select the movie file you want to play continuously by pressing F the lt or gt button to select it from the file list section hl 00 04 03 00 07 38 Movie 01 avi 2 Press the gt Play ENTER C button 3 Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped The Blue button is available when resuming play amp Ifthe Cont movie play help function is set to On in the ve Settings menu a pop up message will appear when you Aiii Resumes playing fom the last viewed f resume play a movie file 2 me PB Ek sun I
23. not work in certain situations Searching channels operating Media Play or Plug amp Play Initial setup etc When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again Check if the Anynet Function of Anynet device is set on want to start Anynet Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet Select View TV in the Anynet menu Press the SOURCE button on the TV remote control and select a device other than Anynet devices Press P A PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to Anynet device appears on the screen You cannot use the remote control when you are configuring Anynet or switching to a view mode Use the remote control when the Anynet setting or switching to view mode is complete The Anynet device does not play You cannot use the play function when Plug amp Play Initial setup is in progress The connected device is not displayed Check whether or not the device supports Anynet functions Check whether or not the HDMI Cable is properly connected Check whether Anynet HDMI CEC is set to On in t
24. set to Normal E Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select External speaker TV speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker you should use these settings TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker you should use these settings TV Speaker On External Speaker On amp If there is no video signal both speakers will be mute Additional Setting digital channels only E DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level amp According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB To increase or decrease the volume adjust between the range 0 and 10 respectively E SPDIF Output SPDIF Sony Philips Digital InterFace is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format During the re
25. the illustration below amp To use the SWL Samsung Wireless Link function connect to the USB 1 HDD port TV Side Panel the Wall The LAN Port on Wireless IP sharer Samsung Wireless or LAN Adapter Samsung s Wireless LAN adapter is sold separately and is offered by select retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11A B G and N communication protocols Samsung recommends using IEEE 802 11N When you play video over a IEEE 802 11B G connection the video may not play smoothly amp NOTE You must use the Samsung Wireless LAN Adapter WISOSABGN to use a wireless network Samsung s Wireless LAN adapter is sold separately The WISO9ABGN Wireless LAN adapter is offered by select retailers Ecommerce sites and Samsungparts com To use a wireless network your TV must be connected to a wireless IP sharer If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure If you apply a security system other than the systems listed below it will not work with the TV If Pure High throughput Greenfield 802 11n mode is selected and the Encrypti
26. turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade TV Side Panel USB Drive E By Online Upgrade the software using the Internet amp Q First configure your network For detailed procedures on using the Network Setup refer to the Network Connection instructions amp If the Internet connection does not operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade By Channel Upgrade the software using the broadcasting signal amp Q Ifthe function is selected during the software transmission period software will be automatically searched and downloaded amp The time required to download the software is determined by the signal status Standby Mode Upgrade A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the LCD product This phenomenon may continue for more than 1 hour until the software upgrade is complete H Alternative Software backup Displays the Software version downloaded through By Online During the software upgrading When the Upgrade will discontinue
27. using the recorder This is only available for devices that support the recording function device_name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name 36 Engish D Setting Up Anynet H Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On Q When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off The active source on the TV must be set to TV to use the Anynet function amp Even if an external device is still recording it may turn off fl Switching between Anynet Devices 1 Anynet devices connected to the TV are listed A it you cannot find a device you want press the red button to refresh the list 2 Select a device and press the ENTER C button You can switch to the selected device amp Only when you set Anynet HDMI CEC to On in th
28. your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process How to set up automatically To set up the wireless connection automatically follow these steps 1 Follow Steps 1 through 6 in the How to set up PBC WPS above 2 Press the Y button to select Internet Protocol Setup and then press the ENTER C button Press the A or Y button to select Auto and then press the ENTER C button 10 Ti Press the A button to go to Select a Network and then press the ENTER C button The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the A or Y button to select a network and then press the ENTER C button Ifthe AP is set to Hidden Invisible you have to select Add Network and enter the correct Network Na me SSID and Security Key to establish the connection If the Security PIN pop up appears go to Step 6 If the Network Connecting Screen appears go to Step 10 Press the A or Y button to select Security or PIN For most home networks you would select Security for Security Key The Security Screen appears Select a network Security Key SE 0 entered ee Ga es ss a ber Gii aia i aa WM WL EX Lower case as na Wad a ete des aa i a aaa es SPC Move Ent
29. 0 Tine Team Today 18 00 19 00 a 27 Discovery American Chopper 28 DiscoveryH amp L Programmes resume at 06 00 800 five Home and I Family Affairs _ Fiv Dark Angel __ 24 price drop tv No Information 16 Qvc QVC Selection E R4DTT No Information View Mode 24 Hours BI Ch Mode ZJInformation lt Page Ce Watch 1O Engish Using Scheduled View DTV Air 800 five Family Affairs 18 00 18 30 Drama Tanya confesses all to a stunned Babs Conrad is anxious to hear 18 30 Today 19 15 Today Q Family Affairs Dark Angel 5 View Mode Information C Cancel Red View Mode View the list of programmes that are playing now or coming up Yellow 24 hours Viewing the list of programmes to be broadcasted after 24 hours 0 Blue Ch Mode Select the type of channels you want o display on the Channel View window The Ch Mode differs according to the antenna source Information Displays details of the selected programme Page Moves to the previous next page ENTERG button When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTER C button again and select Cancel Schedules Channel Manager Delete or set favourites channels and use the programme guide for digital broadcasts Select a c
30. 1 Other Information A AllShare Amplify Antenna Anynet Audio Out Auto Adjustment Auto Volume B Background Music Balance L R Basic View Batteries Black Tone Blanking Bracket Brightness C Cable Tie Change PIN Channel Manager Clock Colour Tone Component Connecting to a PC Connecting to an Audio Device D Digital Audio Out DivX VOD D sub Dynamic Dynamic Contrast E Eco Sensor Edit Name Editing Channels Energy Saving Equalizer External Speaker EPG 52 Engish 42 16 12 36 36 16 17 1 oak ast OD P 1 NO CO D i 22 36 35 22 13 14 14 12 14 16 17 10 F Favourites Channel Film Mode Fine Tune Flesh Tone Frequency H HDMI Headphones Home Theatre Installation Space Internet TV L Language Licence Lock M Media Play elody enu Transparency usic N Navigate Network Connection Network Setup Now amp Next guide O ON OFF button Optimal resolution P Password Photos Picture Size PIP Picture in Picture Plug amp Play Power Indicator 11 15 13 14 12 7 36 8 36 39 19 50 13 29 19 19 33 23 24 26 10 22 40 34 15 35 20 R Receiver Recording Remote Control Repeat Mode RGB Only Mode Rotate S Select All Self Diagnosis Sharpness Signal Information Sleep Timer Slide Show Software Upgrade Source List Speaker Select Specifications Standby mod
31. 8 avi AVI MP3 AC3 LPCM he MK H 264 BP MP HP 920 x 1080 6 30 25 ADPCM DTS Core MPEG4 SP ASP 920 x 1080 6 30 8 Motion JPEG 800 x 600 6 30 Divx 3 11 4 x 5 1 6 0 920 x 1080 6 30 XviD 920 x 1080 6 30 8 MP3 AC3 LPCM asf ASF H 264 BP MP HP 920 x 1080 6 30 25 ADPCM WMA MPEG4 SP ASP 920 x 1080 6 30 8 Motion JPEG 800 x 600 6 30 8 wmv ASF Window Media Video v9 920 x 1080 6 30 25 WMA H 264 BP MP HP 920 x 1080 6 30 25 mp4 MP4 MPEG4 SP ASP 920 x 1080 6 30 MP3 ADPCM AAC XVID 920 x 1080 6 30 8 H 264 BP MP HP 920 x 1080 6 30 25 39p 3GPP ADPCM AAC HE AAC MPEG4 SP ASP 920 x 1080 6 30 8 VRO MPEG1 920x1080 24 25 30 30 vro AC3 MPEG LPCM VOB MPEG2 920x1080 24 25 30 30 MPEG1 920x1080 24 25 30 30 sis PS MPEG2 920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 920 x 1080 6 30 25 bie MPEG2 920x1080 24 25 30 30 lt AC3 AAC MP3 DD t TS H 264 920 x 1080 6 30 25 HE AAC Hp VC1 920 x 1080 6 30 25 Other Restrictions amp NOTE e f there are problems with the contents of a codec the codec will not be supported e Ifthe information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Fram sec listed in the table above e Ifthe Index Table is in error the Seek Jump function
32. B Set Top Box satellite receiver cable box satellite receiver STB suoloE9UU0D Z0 NIGH A amp HDMI IN 1 DVI 2 3 4 PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack For the DVI cable connection use a DVI to HDMI cable or DVI HDMI DVI to HDMI adapter for video connection and the PC DVI AUDIO IN jacks for audio e If an external device such as a DVD Blu ray player cable box STB satellite receiver supporting a HDMI versions older than 1 3 is connected the TV may operate abnormally e g no screen display no sound annoying flicker abnormal colour If there is no sound after connecting an HDMI cable check the HDMI version of the external device If you suspect the version is older than 1 3 contact the provider of the device to confirm the HDMI version and request an upgrade It is recommended you purchase an HDMI certified cable Otherwise the screen may appear blank or a connection error may occur Using a Component up to 1080p or Audio Video 480i only Cable and Using a Scart Cable Available devices VCR DVD Blu ray player cable box STB satellite receiver NIAY REVUE p COMPONENT IN TT T Yellow Red White a Red Blue Green ume amp In Ext mode DTV Out supports MPEG SD Video and Audio only amp To obtain
33. Network Connection is set to Wireless Make sure the TV is be connected to a wireless IP sharer router The picture will not display in full screen HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control does not turn the TV on or off or adjust he volume Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code A Not Supported Mode message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to the resolution settings on page 20 of this manual There is a plastic smell from the TV This smell is normal and will dissipate over time The TV Signal Information is unavailable in the Self Diagnosis Test menu The TV is tilted to the side This function is only available with digital channels from an Antenna RF Coax connection P 20 Remove the base stand from the
34. On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme Available only when the Input source is set to TV H Parental Lock Parental Rating Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code Allow All Unlock all TV ratings amp Q amp The items of Parental Lock differs depending on the country Change PIN Change your personal ID number required to set up the TV A amp A it you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER off gt MUTE 8 gt 2 gt 4 gt POWER on D Other Features Language Menu Language Set the menu language Teletext Language Set a desired language for teletext BQ English is the default in cases where the selected language is unavailable in the broadcast Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected Subtitle Use this menu to set the Subtitle mode amp The subtitle feature does not work in SUBT Component or HDMI modes 2 Subtitle Off On Switches subtitles on or off Mode Normal Hearing Impaired Sets the subtitle mode Subt
35. Play continuously 4 Chaptering lt gt Jump 2 Tools D Return Music Playing a Music 1 Press the lt or gt button to select Music then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired file in the file list IL I Love you 3 Press the ENTER C button or gt Play button vice During music playback you can search using lt and button lt j REW and gt gt buttons do not function during play Muskeg 01 10 04 02 amp Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem k sun C Pause lt gt Jump 4 Tools 5 Return Creating My Playlist 1 Press the lt 4 gt A Y button to select the tracks you want to add and press the TOOLS button 2 Select Add My Playlist 3 When the Add My Playlist menu appears select New My Playlist To add to an old play list simply select the play list you want to add music to 4 The newly created or updated playlist will be in the main Music page Playing MyPlaylist Select the My Playlist folder and it will play automatically Press the A or W button to select a different music file within the play list English 3 3 s n
36. Stand 1EA e Guide Stand 1EA e Screws 9EA 32 inch model only 8EA Viewing the Control Panel The product colour and shape may vary depending on the model Remote control sensor Power Indicator t SOURCE MENU a voa C Speakers Power Turns the TV on or off Power Indicator Blinks and turns off when the power is on and lights up in standby mode SOURCE L Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features amt Adjusts the volume In the OSD use the buttons as you would use the lt and gt buttons on the remote control VCHA Changes the channels In the OSD use the W CH A buttons as you would use the V and A buttons on the remote control Remote control sensor Aim the remote control towards this spot on the TV Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord 4 Engish Viewing the Remote Control This is a special remote control for the visually impaired persons and has Braille points on the Power Channel and Volume buttons Ti the TV on and off P 6
37. TV and reassemble it There are difficulties assembling the stand base Make sure the TV is placed on a flat surface If you can not remove the screws from the TV please use a magnetized screw driver The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected English 49 Other Information Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU Setup Plug amp Play Initial setup gt ENTER C You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source The message Scramble signal or Weak Sign
38. al No Signal appears If you are using a CAM CARD CI Cl check that it is installed into the common interface slot If there is still a problem pull the CAM CARD out of the TV and insert it into the slot again You turned the TV off 45 minutes ago and it turned on again It is normal The TV operates the OTA Over The Aerial function itself to upgrade firmware downloaded whilst your watching TV There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture amp This TET LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Licence Q1 DOLBY DIGITAL PLUS PULSE Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories S dts 2 0 Digital Out Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Prod
39. an health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items SS for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 2 English Contents Accessories Viewing the Control Panel Viewing the Remote Control
40. cally USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Contents when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp If there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly amp When there is only one photo file in the USB device the Slide Show will not play amp Ifa folder name is too long the folder cannot be selected Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected amp Auto Power Off available only when the TV is turned on by Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating fil Locking Programs Security The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option Child Lock Off
41. ception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital amp By connecting to 5 1ch speakers in a Dolby Digital setup maximize your interactive 3D sound experience Audio Delay Correct audio video mismatch when watching TV or video and listening to digital audio output using an external device such as an AV receiver E Dolby Digital Comp Line RF This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Sound Reset OK Cancel Reset all sound settings to the factory defaults Selecting the Sound Mode When you set to Dual I ll the current sound mode is displayed on the screen Aucie Dual I II Default Type re Mono Mono Automatic Sieh Stereo Stereo Mono change Dual Dual Dual II Dual Mono Mono Automatic NICAM Stereo Mono Stereo change Stereo 55 Dual Mono gt Dual I Dual S Dual Il lt if the stereo signal is weak and an automatic switching occurs then switch to the mono Qy Only activated in ster
42. de is set to Movie and when the external inputs are connected Q Some external devices may not support this function Interval Select interval to adjust Red Adjust the red level Green Adjust the green level Blue Adjust the blue level Reset Resets the 10p White Balance to its default settings Flesh Tone Emphasize pink Flesh Tone Edge Enhancement Off On Emphasize object boundaries xvYCC Off On Setting the xvYCC mode on increases detail and colour space when watching movies from an external device e g DVD player connected to the HDMI or Component IN jacks amp Available when the picture mode is set to Movie and when the external input is set to HDMI or Component _ Some external devices may not support this function Picture Options In PC mode you can only make changes to the Colour Tone Size and Auto Protection Time Picture Options Colour Tone Normal gt Size Auto Wide Screen Mode 16 9 Digital Noise Filter Auto MPEG Nosie Filter Auto HDMI Black Level Normal Film Mode Off Vv Move Enter 5 Return H Colour Tone Cool Normal Warm1 Warm2 amp Warmi or Warm will be deactivated when the picture mode is Dynamic S Settings can be adjusted and stored for each external device connected to an input on the TV esz E Size Your cable box satellite receiver may have its own set of screen sizes as well However we h
43. e 10 If the Network Function has not acquired the network connection values go to the directions for Manual D4 Engish Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu that appears click Status On the dialog that appears click the Support tab 4 Onthe Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 6 in the How to set up automatically procedure 2 Set Internet Protocol Setup to Manual Press the Y button on your remote to go to the first entry field 4 Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another 5 When done press the RETURN button on your remote 6 Select Network Test to check the Internet connectivity Connecting Wireless Network To connect your TV to your network wireless you need a wireless router or modem and a Samsung Wireless LAN Adapter WISO9ABGN which you connect to your TV s back or side panel USB jack See
44. e e Be sure to contact an authorized service center when installing your set in a location with heavy dust high or low temperatures high humidity chemical substances and where it operates for 24 hours such as the airport the train station etc Failure to do so may cause serious damage to your set e Use only a properly grounded plug and receptacle An improper ground may cause electric shock or equipment damage Class Equipment only e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e Do not allow children to hang onto the product Store the accessories battery etc in a location safely out of the reach of children e Do not install the product in an unstable location such as a shaky self a slanted floor or a location exposed to vibration e Do not drop or impart any shock to the product If the product is damaged disconnect the power cord and contact a service center WARNING TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES Wiring the Mains Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted
45. e Subtitle Symbol T Timer Title Tools Troubleshooting TV Speaker U USB Using Channel View Using Scheduled View Using the Favourite Channels V VCR Video Formats Videos Volume W Wall Mount Warm White Balance 20 4 5 38 37 35 14 35 18 34 48 17 29 10 10 11 32 31 17 45 15 14 Warning Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product CAUTION This symbol indicates that high voltage is present inside It is dangerous to make any RISK OF ELECTRIC SHOCK DO NOT OPEN kind of contact with any internal part of this product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER This symbol alerts you that important litera SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO ture concerning operation and maintenance QUALIFIED PERSONNEL has been included with this product e The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation To ensure reliable operation of this apparatus and to protect it from overheating these slots and openings must never be blocked or covered Do not cover the slots and openings with a cloth or other materials Do not block the slots and openings by placing this apparatus on a bed sofa rug or other similar surface Do not place this apparat
46. e Application menu the Device List menu appears Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List D Recording You can make a recording of a TV programme using a Samsung recorder 1 Select Recording Q When there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List Q When the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name amp Pressing the e REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Q Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual Engish 37 sounjee4 peoueapy vo Advanced Features i Listening through a Receiver You can listen to sound through a receiver i e Home Theatre instead of the TV speaker 1 Select Receiver and set to On 2 Press t
47. e TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote RF Cable Antenna Connection The TV is not receiving all channels Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU Setup Plug amp Play Initial setup and wait for all available channels to be stored Verify the Antenna is positioned correctly The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue PC Connection A Not Supported Mode message appears Set your PC s output resolution and frequency so they match the resolutions supported by the TV P 22 PC is always shown on the source list even if a PC is not connected This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio If you are using a HDMI connection check the audio output setting on your PC Network Connection Depending on Models Wireless network connection failed Others Samsung Wireless USB dongle is required to use a wireless network Make sure the
48. e and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly e Game Mode is not available in TV and PC mode e After connecting the game console set Game Mode to On to prevent poor picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Custom BD Wise Off On Provides the optimal picture quality for Samsung DVD Blu ray and Home Theatre products which support BD Wise When BD Wise is turned On the picture mode is automatically changed to the optimal resolution Available when connecting Samsung products that support BD Wise through a HDMI cable Menu Transparency Bright Dark Set the Transparency of the menu Melody Off Low Medium High Set so that a melody plays when the TV is turned on or off Common Interface Cl Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off Purchase a Cl CAM module at your nearest dealer or by phone Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow s
49. e in any Country other than the one for which the product was originally designed and manufactured This page ts intention ally left blank
50. eate an account and link it with desired service application amp NOTE e Account will be made less than 10 Maximum number of characters is 10 Manager Service Site Register login information for service sites such as YouTube Change Password Change account password Delete Delete the account f you forget the password press the following sequence of remote control buttons to reset the password to 0 0 0 0 POWER off gt MUTE gt 9 gt 2 gt 8 POWER on Service Manager Delete and lock application installed to Internet TV Lock Lock the application amp Accessing a locked widget requires the password Delete Delete the application Properties Display information about Internet TV Use the Check the speed of your Internet connection option to test your network connection Using the Internet TV service Using the Samsung Apps by category 2 The following categories are available e What s New Displays newly registered applications Samsung Apps e Video Displays various video media such as movies TV 5 Samsung Apps is a store for downloading applications to be shows and short length videos 3 used on Samsung TV AV equipment e Games Displays various games such as sudoku and a Users can enjoy a variety of contents like videos music chess J S a useful information etc using the downloaded e Sports Displays various sports media such as match B Additional applications will be availab
51. en contrast H Shadow Detail 2 2 Increase the brightness of dark images amp Disabled under PC mode E Gamma Adjust the primary colour intensity 14 Engish Expert Pattern Off Pattern 1 Pattern 2 By running the Expert Pattern function the picture can be calibrated without a generator or filter If the OSD menu disappears or a menu other than the Picture menu is opened the calibration is saved and the Expert Pattern window disappears amp while the Expert Pattern is running sound is not output By Only enabled in DTV Component and HDMI modes Disabled for channels that support MHEG if Digital Text is Enable RGB Only Mode Off Red Green Blue You can adjust Colour or Tint of Red Green or Blue for the picture from an external device DVD player home theatre etc Colour Space Auto Native Custom Adjust the range of colours available to create the image To adjust Colour Red Green Blue and Reset set Colour Space to Custom White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings 10p White Balance Off On Controls the white balance in 10 point interval by adjusting the red green and blue brightness Available when the picture mo
52. eo sound signal amp Only available when the Input source is set to TV Engish 17 sounyee4 oiseg g0 Basic Features a O l Setting the Time Time H Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button A it you disconnect the power cord you have to set the clock again Clock Mode Auto Manual S Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually The antenna must be connected in order to set the time automatically Clock Set Set the Day Month Year Hour and Minute manually Available only when Clock Mode is set to Manual Using the Sleep Timer E Sleep Timer Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp Q To cancel Sleep Timer select Off Setting the On Off Timer E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time Channel 0 Sun Mon Tue Wed Thu Fri Sat 4 gt Move Adjust C Enter D Return 18 Engish On Time Off Time Set the hour minute and activate inactivate To activate timer with the setting you have chosen set to Activate Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automati
53. er 5 Return On the Security screen enter your network s Pass Phrase amp You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem To enter the Pass Phrase follow these general directions Press the number buttons on your remote to enter numbers Use the direction buttons on your remote to move from button to button on the Security Key screen Press the Red button to change case or display symbols characters Toaenter letter or symbol move to the letter or symbol and then press the ENTER C button To delete the last letter or number you entered press the Green button on your remote When done press the Blue button on your remote The Network Connecting screen appears Wait until the connection confirmation message is displayed and then press the ENTER C4 button The Network Setup screen re appears To test the connection press the RETURN button to select Network Test and then press the ENTER C button Network Setup Ad Hoc You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network This function is available when SWL Samsung Wireless Link is set to Off How to connect to new Ad hoc 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 26 2 Choose Select a network A list of devices networks appears 3 While in
54. from last step this function be activated HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software Engish DL sounyee4 oiseg g0 Advanced Features Connecting to a PC Using an HDMI DVI Cable a D sub Cable PC DVI AUDIO IN Display Modes D Sub and HDMI DVI Input Optimal resolution is 1920 X 1080 60 Hz Mode Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock Frequency MHz Sync Polarity H V KHz ra 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 Ht 640 x 480 35 000 66 667 30 240 J MAC 832 x 624 49 726 74 551 57 284 J 1152 x 870 68 681 75 062 100 000 fe 720 x 576 35 910 59 950 32 750 Te 1152 x 864 53 783 59 959 81 750 VESA CVT 1280 x 720 56 456 74 777 95 750 Ht 1280 x 960 75 231 74 857 130 000 Ht 640 x 480 31 469 59 940 25 175 T 640 x 480 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 WH 1024 x 768 48 363 60 004 65 000 J 1024 x 768 56 476 70 069 75 000 J 1024 x 768 60 023 75 029 78 750 1152 x 864 67 500 75
55. g the video music photo file group ER SUM JA Change Device W Select ID Sorting 42 Tools 1 While a file list is displayed move to the any file in desired group 2 Press the TOOLS button and select Play Current Group D Media Play Additional Function Sorting the file list Press the blue button in the file list to sort the files Category Operations Videos Music Photos BD Basic View t shows whole folder You can view the photo by selecting the folder v v v Title t sorts and displays the file title in Symbol Number Alphabet Special order Jv v Jv t sorts and displays the file by preference You can change the file preference in oe Preference he file list section using the green button Saat Latest Date It sorts and shows files by latest date v v Earliest Date It sorts and shows files by earliest date v y Artist t sorts the music file by artist in alphabetical v a Album t sorts the music file by album in alphabetical order v Genre t sorts music files by the genre s Mood t sorts music files by the mood You can change the music mood information v a Monthl t sorts and shows photo files by month It sorts only by month from January to y December regardless of year B4 Engish Videos Music Photos Play Option menu g During playing a file press the TOOLS button Option menu Operations Vide
56. hannel in the Channels My Channels or Scheduled screen v 1futech 24ore tv sj uueyg BBC World Radio Data Other 23 bid up tv Analogue 33 Boonerang 32 Cartoon Nwk 5 Class News Coming Soon Discovery wWAntena Zoom W Select Sort gt Page 3 Tools E Channels Shows the channel list according to channel type BW My Channels Shows the group of the channel E Scheduled Shows all the currently reserved programmes SN Using the colour buttons with the Channel Manager D Red Antenna Toggle among Air or Cable Green Zoom Enlarges or shrinks a channel number Yellow Select Select desired channels and press the Yellow button to set all the selected channels at the same time The YW mark appears to the left of the selected channels Blue Sort Change the list ordered by channel name or channel number Page Move to next or previous page A Tools Displays the Channel Manager option menu The Options menus may differ depending on the situation Channel Status Display Icons Icons Operations A An Analogue channel vV A channel selected Y A channel set as a Favourite A programme currently being broadcast A locked channel A reserved programme D Using Favourite Channels My Channels in Channel Manager Shows all favourite channels E Edit My Channels You can set the selected channels to desired my channels group
57. he Anynet setup menu Search Anynet devices again You can connect an Anynet device using the HDMI Cable only Some HDMI cables may not support Anynet functions If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV programme cannot be recorded Check whether the antenna jack on the recording device is properly connected The TV sound is not output through the receiver Connect the optical cable between TV and the receiver 38 English ij Getting Started with Internet TV Recommended Internet e Internet TV brings useful and entertaining contents and services directly from the web to INTERNET your TV soinjee4 peoueApy vO O Samsung Apps Settings A Login B Markas Favorite BJ Sortby 5 Return NOTE Configure the network settings before using Internet TV For more information refer to Network Connection P 23 e Unsupported fonts within the provider s content will not display normally e Slow responses and or interruptions may occur depending on your network conditions English may be only supported in application service depending on region This feature is not available in all locations If you experience a problem using an application please contact the content provider According to circumstances of the contents provider an application s updates or the application Itse
58. he EXIT button to exit A amp A it your receiver supports audio only it may not appear in the device list amp S The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV When the receiver i e Home Theatre is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV aerial signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV e The TV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products l Troubleshooting for Anynet Problem Possible Solution Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only Connect only one receiver home theatre Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI Cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether it is Anynet exclusive remote control Anynet does
59. ighly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Adjusts the picture size to 16 9 for DVDs or wide broadcasting Wide Zoom Magnifies the picture size more than 4 3 amp Adjusts the Position by using A VW buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size amp Adjusts the Position or Size by using A Y button 4 3 The default setting for a movie or normal broadcasting _Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080 1080p or Component 1080i 1080p signals are input NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode you may need to center the picture 1 Press the lt or gt button to select Position 2 Press the ENTER C button 3 Press the A WV lt or gt button to move the picture Depending on the input source the picture size options may vary The available items may differ depending on the selected mode In PC mode only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input of the TV If you use the Screen Fit function with
60. in the How to set up using PBC WPS P 26 2 Press the W button to select Internet Protocol Setup and then press ENTERC button Press the A or V button to select Manual and then press ENTER C button 3 Press the Y button to go to the first entry field IP Address 4 Use the number buttons to enter numbers 5 When done with each field use the button to move successively to the next field You can also use the other arrow buttons to move up down and back 6 Enter the IP Address Subnet Mask and Gateway values 7 Press the A or button to go to DNS 8 Press the W button to go to the first DNS entry field Enter the numbers as above 9 When done press the A button to go to Select a Network Select your network and then press ENTER C button 10 Go to Step 4 in the How to set up automatically P 26 and follow the directions from that point on Network Setup SWL Samsung Wireless Link This function lets you connect a Samsung device that supports the PBC WPS to your TV You can connect devices to the TV even if a sharer is not connected to the TV To use the Internet TV the AP access point must be connected to the wireless network fa Samsung Wireless Lan Adapter is connected to the USB 2 port the network may not operate normally We recommend to connect to USB 1 HDD port Q amp Q Only sharers using the 2 4 Ghz band are supported Sharers using the 5 Ghz band are not s
61. in which case the same basic set up information will almost always be applied If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear 3 Click on Display and a display dialog box will appear 4 Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e Ifa vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box if Changing the Preset Sound Mode SRS TheaterSound E Standard Selects the normal sound mode H Music Emphasizes music over voices H Movie Provides the best sound for movies E Clear Voice Emphasizes voices over other sounds H Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired 16 Engish a Adjusting sound settings Equalizer Adjusts the sound mode E Balance L R Adjusts the balance between the right and left speaker HM 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies E Reset Resets the equalizer to its default settings a Sound Systems Etc SRS TruSurround HD Off On standard s
62. itle Language Sets the subtitle language amp Q Ifthe programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected amp English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable If the programme broadcasts with digital text this feature is enabled Q MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includesdata linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games Network Network Type Network Setup Network Test Samsung Wireless Link SWL connect For details on setting up options refer to the Network Connection instructions P 23 General Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE e Precautions and limitations for game mode To disconnect the game consol
63. le hereafter information images and short length video e Lifestyle Includes various lifestyle media services such Samsung AppS Video i as music personal photo management tools and social What s New o networking such as Facebook and Twitter Video e Information Includes various information services such Games i as news stocks and weather Sports e Others Includes other miscellaneous services Lie e My Page Displays the application list and your cyber information cash balance oe amp Q Starting in the middle of 2010 US and Korea My Page only you can purchase cyber cash for buying Help applications through tv samsung com ae RL ee N So YO e Help If you have questions about Internet TV check this section first amp Using the colour buttons with the Samsung Apps O Red Login To log in to the Internet service E Green Thumbnail View To change the view mode D Blue Sort By To sort the application by Featured Most Downloaded Most Recent or Name e 5 Return Moves to previous menu Engish 4 Advanced Features a OOOO O l About AllShare AllShare connects your TV and compatible Samsung mobile phones devices through a network On your TV you can view call arrivals SMS messages and schedules set on your mobile phones In addition you can play media contents including videos photos and music saved on your mobile phones or the other devices such as your PC by control
64. lf may be discontinued Depending on your country s regulations some application may have limited service or not be supported Screen Display TV Screen S Displays the current channel Recommended Applications Displays the recommended service by Samsung You are not able to add or delete a service in this list Information Displays notices new applications and advertisemevnts brought to you by Samsung product introductions Downloaded Applications Displays the downloaded applications through the Samsung Apps Application service You can experience various service by provided samsung Internet TV Settings Controls E Red Login To log in to Internet TV E Green Mark as Favorite To mark the application as a favorite D Blue Sort by To sort the application D Return To return to the previous menu amp The Color buttons may work differently depending on the application Edit and configure application and Internet TV settings English 39 Advanced Features Account Login For an application with multiple categories use lt and to access the different categories User account 4 adm gt SESE A Move 0 9 Enter PIN 5 Cancel For amore enjoyable application experience register and log in to your account amp For instructions on creating an account refer to Setting up Internet TV Internet TV ID Create 1 Press the Red button in Inter
65. ling them on the TV via the network Additionally you can use your TV for browsing web pages in your mobile phones amp For more information visit www samsung com or contact the Samsung call center Mobile devices may need additional software installation For details refer to each user s guide Setting Up the AllShare Setup E Message On Off Enables or disables the message function for call arrivals SMS messages and schedules set on your mobile phones E Media On Off Enables or disables the media function When the media function is on it plays videos photos and music from a mobile phone or other device that supports ScreenShare H ScreenShare On Off Enables or disables ScreenShare accesses various contents from mobile phones or other ScreenShare supporting devices E TV name Sets the TV name so you can find it easily on a mobile device f you select User Input you can type on the TV using the OSK On Screen Keyboard n Set up E Media E ScreenShare C Select D Return j Exit 4 Engish Message Media ScreenShare Shows a list of mobile phones or connected devices which have been set up with this TV for using the Message Media or ScreenShare function The Media function is available in all mobile devices which support AllShare E Allowed Denied Allows Blocks the mobile phone E Delete Deletes the mobile phone from the list amp Q This functi
66. liver HD high definition picture quality Cable Satellite subscribers Try HD stations from the channel line up Antenna connection Try HD stations after performing Auto programme amp Many HD channels are upscaled from SD Standard Definition contents Adjust the Cable Set top box video output resolution to 1080i or 720p Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV cca up to 1m may cause noise in picture on analog and digital TV Colour is wrong or missing If you are using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or brightness Adjust the Picture options in the TV menu go to Picture mode Colour Brightness Sharpness Adjust Energy Saving option in the TV menu go to MENU Picture ECO solution Energy Saving P 14 Try resetting the picture to view the default picture settings go to MENU Picture Picture Reset There is a dotted line on the edge of the
67. msung recorders with the Anynet feature SAMSUNG Installing batteries Battery size AAA amp NOTE Use the remote control within 23 feet from the TV e Bright light may affect the performance of the remote control Avoid using nearby special fluorescent light or neon signs e The colour and shape may vary depending on the model Engish 5 G oF Tennant LO p pes Bune Getting Started Connecting to an Antenna When the TV is initially powered on basic settings proceed automatically Q Preset Connecting the mains and antenna VHF UHF Antenna Cable Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV amp To return to the previous step press the red button 1 Selecting a language 2 Selecting Store Demo or Home Use 3 Selecting a country Selecting an antenna Selecting a channel OI A 6 Setting the Clock Mode 7 Viewing the HD Connection Guide 8 Enjoy your TV Press the A or Y button then press the ENTER C button Select the desired OSD On Screen Display language Press the lt or gt button then press the ENTER C button e Select the Home Use mode Store Demo Mode is for retail environments e Return the unit s settings from Store Demo to Home Use
68. n fasten the screws onto the TV again 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly Qy Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer amp Install the TV near to the wall so that it does not fall backwards amp It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV amp Untie the string before moving the TV Engish 4 77 UO PEULIOJU ABYIO 90 Other Information Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Solutions and Explanations Picture Quality First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test P 20 If the test image is properly displayed the poor picture may caused by the source or signal The TV image does not look as good as it did in the store If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to de
69. net TV home page 2 Select desired User account then press the ENTER C button A it you want create account press Red button then create account OSD window appear 3 Enter the Password Q When login succeeds User account will be displayed on the screen Setting up Internet TV Settings Create IDs and configure Internet TV settings from this screen Highlight Settings using A and Y buttons and press the ENTER C button Ticker Autorun Channel Bound Service Off Change the Service Lock password 40 Engish System Setup Q Ticker Autorun may not be supported depending on country Ticker Autorun Off On Enable disable ticker autorun upon powering on the TV Channel Bound Service Off On Some channels support application as an Internet data service allowing you to access the Internet service while watching TV amp Only available if supported by the broadcaster Reset Resets Internet TV settings to factory default settings Change the Service Lock password The default password set is 0 0 0 0 A amp A it you forget the password press the following sequence of remote control buttons to reset the password to 0 0 0 0 POWER off MUTE gt 9 2 8 POWER on Internet TV ID You can use this menu when creating deleting the account You can control your account including contents site s account information Account is only for Internet TV Create Cr
70. ns the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not exceed 15 degrees tilt when mounting this TV Firochei inches VESA Spec A B Standard Screw Quantity Family 75 X75 ee 100 X 100 4 23 29 200 X 100 30 40 200 X 200 6 aa 46 55 400 X 400 4 57 65 600 X 400 8 70 80 800 X 400 80 1400 X 800 A Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock Assembling the Cables Enclose the cables in the Cable tie so that the cables are not visible through the transparent stand 46 Engish Anti Theft Kensington Lock The Kensington Lock is a device used to physically fix the system RB when using it in a public place The appearance and locking method TV Rear 2 ba o Y may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use Was S lt O
71. nt that supports Samsung Auto Configuration on www samsung com How to set up using Samsung Auto Configuration 1 Place the AP and TV next to each other and turn them on Q Because the booting times of applications differ you may have to wait for approximately 2 minutes Ifthe LAN cable connected the WAN port of AP during Samsung Auto Configuration you are able to complete until Internet connection test If you do not connect Samsung Auto configuration will check only device connecting of AP Not check Internet 2 After 2 minutes connect the Samsung Wireless LAN Adaptor to the TV When the Samsung Wireless LAN Adaptor is established the pop up window appears 3 As soon as a connection is established place the AP in parallel with the Samsung Wireless LAN Adaptor giving a gap no larger than 25cm 4 Wait until the connection is automatically established Ifthe connection fails reset the AP and then try again Q if Samsung Auto Configuration does not connect your TV to your AP a pop up window appears on the screen notifying you of the failure Reset the AP and then try again If the connection fails again choose one of the other connection setup methods PBC WPS auto or manual 5 After the connection is established locate the sharer at the desired location Ifthe AP settings have been changed or it is the first time you use the new AP after purchase you need to set up again beginning from Step 1
72. o that it aligns parallel with the slot Check if you can see a picture on a scrambled signal channel Wireless Remote Control On Off Turn wireless remote controls on or off or give permission to wireless remote controls English 19 sounyee4 oiseg g0 Basic Features i Picture In Picture PIP PIP Watches simultaneously the TV tuner and one external video source PIP Picture in Picture does not function in the same mode amp NOTE e Ifyou turn the TV off while watching in PIP mode the PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While Internet TV is in operation the PIP function cannot be used e PIP settings Main picture Sub picture Component HDMI1 DVI HDMI2 HDMI3 HDMI4 TV PC PIP Off On Activate or deactivate the PIP function Channel Select the channel for the sub screen Size Liml _ Select a size for the sub picture Position _ J FJ t sub picture Select a position for the Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Support Menu Self Diagnosis H Picture Test Yes No Use to check for picture problems and if the problem continues to occur check the colour pattern E Sound Test Yes No Use the built in melody sound to check for
73. o protect this apparatus from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the set due to lightning and power line surges e Before connecting the AC power cord to the DC adaptor outlet make sure the voltage designation of the DC adaptor corresponds to the local electrical supply e Never insert anything metallic into the open parts of this apparatus Doing so many create a danger of electric shock e To avoid electric shock never touch the inside of this apparatus Only a qualified technician should open this apparatus e Make sure to plug the power cord in until it is firmly inserted When removing the power cord make sure to hold the power plug when pulling the plug from the outlet Do not touch the power cord with wet hands e f this apparatus does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center e Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time especially when children elderly or disabled people will be left alone in the house Accumulated dust can cause an electric shock an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorat
74. ode through a network connection According to functions of the provided server The sorting method may vary The scene search function may not be supported The Play Continuously function which resumes playing of a video may not be supported The Play Continuously function does not support multiple users It will have only memorized the point where the most recent user stopped playing The 44 REW gt gt FF or i Pause buttons may not work depending on the content information A amp A if you experience any file stuttering issue while playing a video over a wireless network we recommend using a wired network Att might not work properly with unlicensed multimedia files Need to Know List before using Media Play e MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated
75. on only deletes the name of the mobile from the list If the deleted mobile device is turned on or trieds to connect to the TV it may appear on the list again Using the Message Function Using this function you view call arrivals SMS messages and schedules set on the mobile phone through the alarm window while watching TV NOTE e To disable the alarm window set Message to Off in Setup of AllShare If OK is selected or if OK is not selected after the message has appeared three times the message will be deleted The message is not deleted from the mobile phone The alarm window can be displayed while using some applications such as Media Play etc To view the contents of a message switch to TV viewing mode e When a message from an unknown mobile phone is displayed select the mobile phone on the message menu in AllShare and select Denied to block the phone Message View If a new SMS message arrives while you are watching TV the alarm window appears If you click the OK button the contents of the message are displayed amp You can configure the viewing settings for SMS messages on your mobile phones For the procedures refer to the mobile phone manual Q Some types of characters may be displayed as blank or broken characters Call Arrival Alarm If a call arrives while you are watching TV the alarm window appears Schedule Alarm While you are watching TV the alarm window appears to display the
76. on type is set to WEP TKIP or TKIPAES WPS2Mixed for your AP Samsung TVs will not support a connection in compliance with new Wi Fi certification specifications If your AP supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode Keep the Samsung Wireless LAN Adaptor at a distance from the TV If you watch the TV with the adaptor connected nearby images may appear corrupted for some channels If your router modem or device is not certified it may not connect to the TV via the Samsung Wireless LAN Adapter Connection Methods You can setup the wireless network connection on six ways Samsung Auto Configuration PBC WPS Auto Setup Using the Auto Network Search function Manual Setup SWL Samsung Wireless Link Ad Hoc All of Samsung Wireless LAN Adapter shoud be connected directly to the TV s USB port USB HUB are not supported LAN Cable English 25 soinjee4 peoueApy vO Advanced Features Network Setup Samsung Auto Configuration This function is available in APs Access Points that support Samsung Auto Configuration If there is no such AP you can connect through PBC WPS or manually This function is available when SWL Samsung Wireless Link set to Off amp You can check for equipme
77. onnect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The Internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics Media Play g a Enjoy photos music and or movie files saved on MediaPlay M DIA P a USB Mass Storage Class MSC device and or a p your PC Videos oF A T Q 2 p 02 k sum IA Change Device Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and or movie files to the USB 1 HDD or USB 2 jack on the side of the TV 3 When USB is connected to the TV popup window appears Then you can select Media Play Q CE NIGH 7 IH ai Si USB Drive Connecting to the PC through network You can play pictures music and videos saved on your PC or on your TV through a network connection in the Media Play mode Af you use Media Play through saved file on you
78. orise When selecting Cable Digital amp Analogue or Digital Provide a value to scan for cable channels Search Mode Full Network Quick Scans for all channels with active broadcast stations and stores them in the TV A it you set Quick you can set up Network Network ID Frequency Modulation Symbol Rate manually by press the button on the remote control Network Auto Manual Selects the Network ID setting mode among Auto or Manual Network ID When Network is Manual you can set up Network ID using the numeric buttons Frequency Displays the frequency for the channel differs in each country Modulation Displays available modulation values Symbol Rate Displays available symbol rates L2 Engish Manual Store Scans for a channel manually and stores in the TV amp If a channel is locked using the Child Lock function the PIN input window appears H Digital Channel When scanning has finished channels are updated in the channel list amp When selecting Antenna Air Channel Frequency Bandwidth amp When selecting Antenna Cable Frequency Modulation Symbol Rate H Analogue Channel Programme Colour System Sound System Channel Search Store If there is abnormal sound or no sound reselect the sound standard required O Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to
79. os Music Photos D Title You can move the other file directly v a Repeat Mode You can play movie and music files repeatedly v v 2 Picture Size Mode1 g Mode Original You can adjust the picture size for preference v 2 Picture Setting You can adjust the picture setting P 13 14 15 16 v v g Sound Setting You can adjust the sound setting P 16 17 v y v A You can play the video file with Subtitle This function only works if Subtitle Setting the subtitles are the same file name as the video file A You can enjoy video in one of supported language as required Audio The function is only enabled when steam type files which support y multiple audio formats are played Stop Slide Show Start Slide Show You can start or stop a Slide Show J Slide Show Speed You can select the slide show speed during the slide show v Background Music You can set and select background music when watching a Slide Show Zoom You can zoom into images in full screen mode v Rotate You can rotate images in full screen mode v Home Background You can move the file to the Media Play desktop v Information You can see detailed information about the played file v v v Settings Using the Setup Menu H Background Setting Select to display the background you want H Cont movie play help resume play Help On Off Select to display the help pop up message for continuous movie playback E Get the DivX VOD registration code Shows the
80. other external input SOURCE the device connected to the input jacks to make your a sources such as DVD Blu ray players input source selection easier fa cable box STB satellite receiver connected a pari ais amp when aPC with a resolution of 1920 x 1080 60Hz is connected to the HDMI IN 1 DVI port PC HDMI1 DVI HDMI2 HDMI3 you should set to DVI PC mode under Edit Name amp When connecting an HDMI DVI cable to the HDMI HDMI4 B ie IN 1 DVI port you should set to DVI PC or DVI In the Source List connected Devices mode under Edit Name inputs will be highlighted amp Ext 1 Ext 2 and PC always stay activated E TV Ext 1 Ext 2 AV Component Basic Features How to Operate the OSD On Screen Display Before using the TV follow the steps below to learn how to The access step may differ depending on the selected menu navigate the menu and select and adjust different functions 1 MENU IO The main menu options appears on NENU the screen naan Picture Sound Channel Setup me Input Application Support A Y Select an icon with the A or Y button ENTERC Press ENTERC4 to access the sub menu A Yv Select the desired submenu with the A or Y button lt gt Adjust the value of an item with the lt or gt button The adjustment in the OSD may differ depending on the selected menu ENTERC Press ENTERC to complete the configuration EXIT Press EXIT TOOLS SE
81. ound mode only This function provides a virtual 5 1 channel surround sound experience through a pair of speakers or headphones using HRTF Head Related Transfer Function technology SRS TruDialog Off On standard sound mode only This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly when viewing a show Audio Language digital channels only Change the default value for audio languages amp The available language may differ depending on the broadcast Audio Format MPEG Dolby Digital 5 1 digital channels only When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function amp Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster H Audio Description Off On Turn the audio description function on or off E Volume Adjust the audio description volume Auto Volume Off Normal Night To equalize the volume level on each channel
82. our Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer amp You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses English 23 Advanced Features Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the Aor Y button to select Setup and then press the ENTER C button 3 Use the AorY button to select Network in the Setup menu and then press the ENTER C button The Network screen appears Network Wired gt Network Type Network Setup Network test SWL Samsung Wireless Link Off SWL connect Move C Enter Return On the Network screen select Network Type 5 Set Network Type to Wired Select Network Setup The Network Setup screen appears IP BEE Subnet k EEE Gateway HEE DNS Auto NS Server EEE Move Enter 5 Return 7 Set Internet Protocol Setup to Auto 8 Auto acquires and enters the needed Internet values automatically 9 Wait two minutes and then press the RETURN button on your remot
83. port USB1 HDD port Do not disconnect the USB device while it is loading e MSC supports MP3 and JPEG files while a PTP device supports JPEG files only The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed e Ifthe files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation of content the distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e If more than 2 PTP devices are connected you can only use one at a time If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported e If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction e Ifthe TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk dri
84. r PC you should download PC Share Manager and users manual from www samsung com TV Side Panel 7 LAN i or N i Samsung fo 7 Wireless LAN External Modem DSL Cable T Wireless IP sharer LAN Cable 1 For more information on how to configure your network refer to Network Connection You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 2 Using a LAN cable connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed You can connect the TV to the PC directly without connecting it through a Sharer Router English 29 Advanced Features amp Functions that are not supported when connecting to a PC through a network The Background Music and Background Music Setting functions Sorting files by preference in the Photo Music and Movie folders The lt lt REW or gt gt FF button while a movie is playing amp The Divx DRM Multi audio embedded caption does not supported amp Samsung PC Share manager should be permitted by the firewall program on your PC When you use Media Play m
85. r TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use Cat 5 cable for the connection See the diagram below The Modem Port on the Wall External Modem IP Sharer TV Rear Pane ADSL VDSL Cable T having DHCP server Ae oe aor eo Modem Cable LAN Cable LAN Cable e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The Modem Port on the Wall TV Rear Panel LAN Cable If you have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values your TV needs to access the Internet so you don t have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact y
86. re marked with a symbol E Blue Sorting Selects the sort list AJ Tools Displays the option menu amp Using the e4 or gt gt button file list can move to next or previous page Videos Playing a Video 1 Press the lt or gt button to select Videos then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired video in the file list 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing time If video time information is unknown play time and progress bar are not displayed During video playback you can search using lt and gt button amp In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself a 00 04 03 00 07 38 Movie 01 avi amp e Supported Subtitle Formats Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip srt string based 3 SubViewer sub string based i Vaa ood a Micro DVD Sub or txt string based ik suv C Chaptering lt gt Jump 4 Tools 9 Retum Engish SL s n e 4 peoueApy vO Advanced Features e Supported Video Formats File Extention Container Video Codec Resolution ig NOLEN Herei Audio Codec fps Mbsp Divx 3 11 4 x 5 1 6 0 920 x 1080 6 30 8 XviD 920 x 1080 6 30
87. registered event You can configure viewing settings for schedule contents on your mobile phones For the procedures refer to the mobile phone manual Q Some special characters may be displayed as blank or broken characters Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played NOTE If the media function executes for the first time the warning popup window appears Press Allow button then you can use Media function on that device Unknown Device 0 is requesting that the media file be allowed to play If you wish to allow the media file to be played at your device please press Allow otherwise press Deny You can also change the setting or resetting of this feature at AllShare Setup Warning Please note that if your device is connected to unsecured or unfamiliar network unwanted or inappropriate contents might be played If you are not sure about the network s identity or content s appropriateness we strongly recommend that you do not Allow the request to play SS To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare setup Contents may not be pla
88. registration code authorized for the TV If you connect to the DivX web site and register the registration code with a personal account you can download VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on Divx VOD visit www DivX com E Get the DivX VOD deactivation code When DivX VOD is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to view information about the connected device Engish 35 Advanced Features What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it To connect to Home Theatre E i Home Theatre Anynet Device 1 Anynet Device 2 3 4 e DE Q E T J HOMIOUT DIGITAL AUDION HOMIIN ce S E CHi SEB Optica cable a e i HDMI 1 3 Cable HDMI OUT HDMI 1 3 Cable
89. s required you should return the product to the retailer from whom it was purchased However Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned In case of difficulty details of our Authorised Service Centres are available from Samsung Electronics U K Ltd Customer Care Centre PO Box 17243 Edinburgh EH11 4YB United Kingdom Tel 0870 SAMSUNG 7267864 UK amp Northern Ireland Tel 0818 717 100 EIRE Only Fax 44 0845 650 8080 Web www samsung com WARRANTY CONDITIONS 1 The warranty is only valid if when warranty service is required the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation and the serial number on the product has not been defaced 2 Samsung s obligations are limited to the repair or at its discretion replacement of the product or the defective part 3 Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres No re imbursement will be made for repairs carried out by non Samsung Dealers and any such repair work and damage to the products caused by such repair work will not be covered by this warranty 4 This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in forc
90. screen If the picture size is set to Screen Fit change it to 16 9 P 15 Change cable set top box resolution The picture is black and white If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed If connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p Sound Quality First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test P 20 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume The picture is good but there is no sound Please check the volume the of external device connected to your TV Set the Speaker Select option to TV speaker in the sound menu P 17 f you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV f you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV f you are using a DVI to HDMI cable a separate audio cable is required f your
91. sound problems A amp A if you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button 20 Engish E Signal Information digital channels only HDTV channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength E Troubleshooting If the TV seems to have a problem refer to this description amp Q If none of these troubleshooting tips apply contact the Samsung customer service centre Software Upgrade Software Upgrade can be performed via a broadcasting signal or by downloading the latest firmware from samsung com to a USB memory device Current Version the software already installed in the TV amp Software is represented as Year Month Day_Version Software Upgrade Current Version 2010 01 18_000001 By USB gt By Online By Channel Standby Mode Upgrade Alternative Software 2 hours later l _ Move Enter Return Installing the Latsted Version E By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be
92. t be workable at this moment Although this TV set meets the latest DVB T and DVB C standards as of August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with some cable service providers For more information please contact your local Samsung customer care centre The reception quality of TV may be affected due to differences in broadcasting method between the countries Please check the TV performance in he local SAMSUNG Authorized Dealer or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of LCD screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match
93. text page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is displayed with other coloured information that can be selected in the same way To display the previous or next page press the corresponding coloured button page 4 hold Hold the displa Es E eee if the eee H peoria Aa el j page is linked with several us vue J yellow blue If the secondary pages which follow on automatically To resume press it again 8 mode Select the Teletext mode LIST FLOF If you press this button in the LIST mode the mode is switched into the List save mode In the List save mode you can save a Teletext page into list using the E9 store button 6 sub page Display the available sub page on p Gz Ga Ame opg The Teletext pages are organized according to six categories Part Contents Part Contents A Selected page number D Date and time B Broadcasting channel identity E Text c Current page number or F Status information FASTEXT search indications information 44 Engish Installing the Wall Mount Assembling the Blanking Bracket When installing the TV onto a wall attach the Blanking Bracket into the part that connects to the stand as shown in the picture UO PEUIOJU ABYIO G0 Preparing before installing Wall Mount 46 55 inch TVs
94. th a lot of movement to provide a clearer picture A it you enable Motion Plus noise may appear on the screen If this occurs set Motion Plus to Off Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films Reset Reset the custom settings Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off If the same image remains on the screen Auto Screen Burn Protector will work Picture Reset OK Cancel Resets your current picture mode to its default settings Engish L5 Basic Features D Setting up the TV with Your PC Set the input source to PC Auto Adjustment Adjust frequency values positions and fine tune the settings automatically amp Not available when connecting through HDMI DVI cable Screen H Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the centre of screen H Position Adjust the PC screen position with direction button A V lt P gt E Image Reset Resets the image to default settings Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC may differ
95. the best picture quality the Component connection is recommended over the A V connection Engish 7 Connections Using an Optical or Audio Cable Connection Available devices digital audio system amplifier DVD home theatre DIGITAL AUDIO A amp DIGITAL AUDIO OUT OPTICAL e When a digital audio system is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e When the receiver home theatre is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theatre receiver When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theatre receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theatre QB Headphones K You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Sound function may be restricted when connecting headphones to the TV Headphone volume and TV volume are adjusted separately
96. the device list press the Blue button on the remote The message Ad hoc is a direct WI Fi connection with cellphone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed 4 Input the generated Network Name SSID and Security Key into the device you want to connect How to connect an existing Ad hoc device 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 26 2 Choose Select a network Then the device list will be displayed 3 Select the device you want in the Device list 4 If security key was applied input the security key If network does not operate normally check the Network Name SSID and Security Key again An incorrect Security Key may cause a malfunction Network Setup Manual If the other methods do not work you need to enter the Network setting values manually Getting the Network Connection Values To get the Network setting values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu click Status On the dialog that appears click the Support tab 4 Onthe Support tab click the Details button The Network settings are displayed Engish 27 sounyee4 peoueapy vo Advanced Features How to set up manually To enter the Network settings into your TV follow these steps 1 Follow Steps 1 through 6
97. tion is available only when the Child Lock is set to On The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function Q When a digital channel is selected press the gt button to view the digital Programme E Sort analogue channels only This operation allows you to change the programme numbers of the stored channels This operation may be necessary after using the auto store E Delete You can delete a channel to display the channels you want H Select All Deselect All Select all the channels or deselect all the selected channels in the channel manager Scheduled in Channel Manager You can view modify or delete a show you have reserved to watch E Change Info Change a show you have reserved to watch E Cancel Schedules Cancel a show you have reserved to watch E Information Display a show you have reserved to watch You can also change the reservation information H Select All Deselect All Select or deselect all reserved programmes Channel List You can see all the channels searched Channel List Transfer Imports or exports the channel map You should connect a USB storage to use this function The PIN number input screen appears Enter your 4 digit PIN n
98. uct Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO Divx is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 Si S TheaterSound TheaterSound SRS and the symbol are trademarks of SRS Labs Inc TheaterSound technology is incorporated under license form SRS Lab Inc 50 Engish Specifications Panel native 1920 x 1080 60 Hz Environmental Considerations Operating Temperature 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing TV System Analogue Depending on your country selection Digital DVB T DVB C DVB T2 UK Only UO PEULIOJU ABYIO 90 Colour video system Analogue PAL SECAM NTSC 4 43 NTSC 3 58 PAL60 Digital MPEG 2 MP ML MPEG 4 H 264 AVC MP L3 MP L4 0
99. umber Q The default PIN number of a new TV set is 0 0 0 0 E Import from USB Import channel list from USB E Export to USB Export channel list to USB sounyee4 oiseg g0 Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk amp To reset the fine tuning select Reset fi Changing the Preset Picture Mode Mode Select your preferred picture type H Dynamic Suitable for a bright room E Standard Suitable for a normal environment HB Natural Suitable for reducing eye strain amp Natural is not available in PC mode H Movie Suitable for watching movies in a dark room i Adjusting picture settings Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control NOTE In analogue TV Ext AV modes of the PAL system the Tint G R function is not available In PC mode you can only make changes to Backlight Contrast and Brightness e Settings can be adjusted and stored for each external device connected to the TV e Lowering picture brightness reduces power consumption Engish 13 Basic Features a Economical Solutions a ECO Solution H Energy Saving Off Low Medium High Picture Off Auto Adjust the brightness of the TV in order to reduce power consumption If you select Picture
100. upported SWL connect You can directly connect a device that supports the PBC WPS to the TV This function is available when SWL Samsung Wireless Link is set to On 28 Engish How to connect Samsung Wireless link For the procedures to establish a connection refer to the following 1 Follow Steps 1 through 5 in the How to set up using PBC WPS P 26 2 Select Samsung Wireless Link by using the Y button and press the ENTER C button to turn it On 3 Select SWL connect by using the Y button and press the ENTER C button 4 lf the Press the PBC button on the device which supports PBC button to connect within 120 seconds message appears press the PBC button on the device to connect amp For more information refer to the wireless network setup manual of the device to be connected 5 If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically amp Ifthe connection fails please retry after 2 minutes If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not c
101. us in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Give your product 10 cm 4 inch clearance from the wall e Do not place this apparatus near or over a radiator or heat resistor or where it is exposed to direct sunlight e Do not place heat generating items such as candles ashtrays incense flammable gas or explosive materials near the product e Do not place a water containing vessel on this apparatus as this can result in a risk of fire or electric shock e Do not expose this apparatus to rain or place it near water near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc If this apparatus accidentally gets wet unplug it and contact an authorized dealer immediately Make sure to pull out the power cord from the outlet before cleaning e This apparatus use batteries In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations Please contact your local authorities for disposal or recycling information e Do not overload wall outlets extension cords or adaptors beyond their capacity since this can result in fire or electric shock e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plug end adaptors and the point where they exit from the appliance e T
102. ves may be released automatically when connected to the TV e Ifa USB extension cable is used the USB device may not be recognized or the files on the device may not be read e If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e Ifa file deleted from the PC is still found when Media Play is run use the Empty the Recycle Bin function on the PC to permanently delete the file 30 Engish D Screen Display Move to the file you desired using the up down right left buttons and then press the ENTER C or gt Play button The file is played QB Supports the Device Mode and Contents Mode in Media Play homepage Information You can ascertain the selected file name and the number of files and page Movie 02 avi Movie 04 avi A g Jan 10 2010 Jan 10 2010 File List Section Movie 06 avi i You can confirm the files and i Jan10 2010 s groups that is sorted by each Sort List Section aii 5 ie H category Displays sorting standard amp Sorting standard is different depending on the contents Operation Buttons E Red Change Device Selects a connected device E Green Preference Sets the file preference not supported in Basic view Yellow Select Selects multiple files from file list Selected files a
103. yed on your TV depending on their resolution and format The ENTERC and lt gt buttons may not work depending on the type of media content Using the mobile device you can control the media playing For details refer to each mobile s user s guide When you want to play media contents from your PC select the PC icon on the main display of AllShare Then the TV s Media Play menu automatically changes For more detail information refer to Media Play Using ScreenShare Function Using ScreenShare you can browse various web contents provided by the mobile phone For example the image below displays an access page for contents on a mobile You can read the mobile s files and view the phone book and calendar on the TV Also in the phone book you can make a call to another person or send to SMS amp NOTE e You must have ScreenShare installed on your Samsung Mobile phone device to use this feature Doc Viewer can read files in doc format but cannot modify them e The screen display may differ depending on the connected device Sie DAR Doc viewer Contacts Calendar Select Mi Return Using your Samsung Phone to Operate Your TV Before you can use this feature you must connect to a Samsung mobile phone that supports ScreenShare functions When operating the TV with your mobile phone only the POWER VOL V CH A and MUTE buttons are supported Even if you keep pressing down on a

Download Pdf Manuals

Related Search

Related Contents

  BWO 155 SL Original operating instructions  MANUEL D`UTILISATION  Samsung 19" stilingo dizaino LED monitorius verslui Vartotojo vadovas  発注仕様書  Equipamentos para jardinagem Aparadores de grama  User Manual - USP HealthCare Products  instr uctions for use medidas d  INSTALLATION INSTRUCTIONS  Samsung K149HWB/HC دليل المستخدم  

Copyright © All rights reserved. Failed to retrieve file