Home

Philips 32PFL7605H 32" Full HD

1. Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Environmental efforts This TV has been awarded the European Union Ecolabel for its environmental qualities A TV that is awarded the Ecolabel contains energy efficient features To access energy saving settings whilst watching TV press the green button on the remote control These energy efficient settings include e Energy saving picture settings To apply a combination of picture settings that reduces energy consumption press the green button and select Energy saving smart setting e Ambient light sensor To save energy the built in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens e Mute screen Turns off the TV display Other functions including sound continue to operate normally Muting the screen saves energy if you just want to listen to audio from the TV See Set up the TV gt Change other settin
2. 54 Then use two SCART cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV YP Scart Digital TV receiver DVD Recorder gl ER o BERE SE Then use an HDMI cable to connect the Home Theatre System to the TV Q DVD Home Theatre System C 39oeeoeooc Finally use a digital audio cinch cable to connect the Home Theatre System to the TV ees Digital Audio DVD Home Theatre System A Digital Audio o e EN 55 English Dig HD receiver First use two antenna cables to connect the Digital HD receiver to the TV CG Antenna Antenna E a M Enable game mode Connect more devices To prevent picture delay set the TV to Game mode Game console 1 Press Dll The most practical connections for a game 2 Select Smart picture gt Game then console are at the side of the TV However press OK more connectors are available at the back of 3 Press D to exit the TV if needed The most practical connections for a game console are at the side of the TV c HDMI Game console EN 56 If you cannot use the side connector use an HDMI or the EXT2 YPbPr and Audio L R cable to connect the game console to the back of the TV On certain models EXT2 is labelled EXT 3 Game console Audio L R gt YPbPr Audio L R Dig camera To view pictures on your digital camera connect it to the USB connector at the side of the
3. Unhide channels 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press amp 4 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed EN 36 5 Select the channel to unhide then press amp 6 Select Unhide channel then press OK Repeat steps 5 and 6 to unhide other channels Update channel list When the TV was switched on for the first time a full installation of channels was performed You can set the TV to add or remove digital channels automatically You can also manually start the channel update Automatic update To set the TV to update digital TV channels automatically leave the TV in standby mode Once a day the TV updates earlier found channels and stores new channels Empty channels are removed from the channel list If a channel update is performed a message appears at startup If you do not want this message to appear 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Channel update message gt Off then press OK e To disable automatic updates In the Channel installation menu select Automatic channel update gt Off Manual update Update channels yourself at any time using the manual update 1 In the Channel installation menu select Automatic installation then press OK 2 Start the update and select Upd
4. DVDRecorder EN 51 English Home Theatre System First use an HDMI cable to connect the device to the TV Qe HDMI DVD Home Theatre System Be Digital Audio xs DVD Home Theatre System Digital Audio uum UEM y Digital Audio In Audio and video synchronisation sync EasyLink If the sound does not match with the video To automatically mute the TV speakers on screen you can set a delay on most DVD when content is played from your Home Home Theatre Systems to match the sound Theatre System enable EasyLink For more and video information see Connect the TV gt Use Philips EasyLink gt Configure TV speakers Page 61 EN 52 Dig receiver satellite First use two antenna cables to connect the antenna to the receiver and the TV ee Antenna Digital receiver S ellite receiver E C 3Joececeooc PQ TV ANTENNA Finally use a SCART cable to connect the receiver to the back of the TV Sd Scart Digital receiver Satellite receiver Dig receiver and DVD R First use three antenna cables to connect the digital receiver and the DVD Recorder to the TV EN 53 English Then use a SCART cable to connect the digital receiver to the TV P d Scart Digital receiver V Satelite receiver Dig receiver DVD R and HTS First use three antenna cables to connect the two devices and the TV e Antenna b TV Loi cmm Antenna i TT Fac 750 EP ANTENNA EN
5. EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre e Set reminders when programmes start e Setup preferred EPG channels Note EPG is not available in all countries Switch on EPG 1 Press W 2 Select Programme guide then press OK EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options Depending on the broadcast service these options are available only for seven or eight days 1 When in EPG press amp 2 Press the Navigation buttons and OK to select and adjust one of the following settings e Setreminder Sets programme reminders e Clear reminder Clears programme reminders e Change day Sets the EPG day Select Today Next day or Previous day e More info Views programme information e Search by genre Searches TV programmes by genre e Scheduled reminders Lists programmes reminders e Update Programme guide Updates the latest programme information Use timers and locks Sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Sleeptimer EN 29 English 3 Press the
6. e Picture shift Adjusts the position of the picture EN 18 Channel list The channel list displays the TV channels and possible radio stations installed on your TV 1 While watching TV press W 2 Select Channel list then press OK 3 Select a channel then press OK to access the channel 4 Press D to exit the channel list without changing the channel Add your devices After you connect a device to the TV add this device in the home menu for easy access In the home menu select Add your devices then press OK Follow the instructions on screen to add the device to the home menu To remove a device from the home menu select the item press B and select Remove this device Press OK Setup Setup in the home menu allows you to change most of the TV settings including e Picture or sound settings e Installation or update of TV channels e Update of TV software e Other special features 1 In the home menu select Setup then press OK 2 Select an item with the Navigation buttons then press OK e Quick picture and sound settings Guides you through picture and sound settings e TV settings Advanced picture and sound settings e Search for channels Guides you through channel installation e Channel settings Advanced channel settings e Connect to network Guides you through the connection to your PC network e Network settings Advanced network settings e
7. more Widgets can be added Open a Widget To display a widget as a full page on screen select the widget and press OK Options With the widgets on screen press amp Options to select the following e Setup Widget e Add Widget e Remove Widget e Move Widget e Switch view Set up widget To set up a widget select the Widget and press B Options and select Setup Widget To enter text select the text field and press OK Select a character on the keyboard and press OK to enter it Add Widget To add a widget press B Options and select Add Widget Scroll through the widget collection with or to look for a widget To add a widget select the widget and press OK Remove Widget To remove a widget press B Options and select Remove Widget Move widget To move a widget within the list on screen press B Options and select Move Widget Press or to reposition the Widget and press OK Switch view If widgets hide subtitles or other information on screen you can move the TV image upwards To view the widgets on top of the TV picture or underneath it press amp Options and select Switch view The availability of widgets varies by country Online TV Some digital broadcasters offer an Online TV service With Online TV you can watch a programme that you have missed Access the broadcaster s Online TV page to see what programmes are available What you need To access an On
8. never touch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power socket Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen ith any object nplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household deaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e Avoid stationary images as much as possible Stationary images are images hat remain on screen for extended periods of time Stationary images include on screen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage e CZ End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused 4Y ae When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products
9. the following settings e Stop Stops playback e Repeat Repeats a video e _ Shuffle on Shuffle off Enables or disables random play of videos Browse PC View photos play music and watch videos on TV from a PC or another storage device in your home network To browse your PC network first set up the network connection see Set up the TV gt Set up network Page 39 If the network is not installed the first time you access Browse PC the network installation starts Follow the on screen instructions To access the PC network In the home menu select Browse PC then press OK With the PC and router switched on the TV displays the multimedia server content from your PC With the PC content list open on screen select the file you want to play and press OK A song a slideshow of photos or a video starts playing View slideshow Press the Navigation buttons to select a picture then press OK e To pause or stop playback press OK again e To jump to the previous or next file press m Or wa EN 31 English e Press D to exit content browser Press B to access or exit the following settings e Show info Displays the file information e Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e Shuffle off Shuffle on Enables or disables random display of pictures in he slideshow e Slideshow
10. 30 dock 44 common interface 63 connect device 47 connect antenna 47 connect channel decoder 58 connect PC 59 connect PC network 39 connect power 47 connect USB 31 connectors bottom 49 connectors rear 49 connectors side 50 controls side 15 D decoder 58 default settings 35 demo 35 devices add 21 devices watch 21 digital channels subtitles 30 digital radio 32 dimensions 69 display resolution 68 E EasyLink buttons 61 EasyLink enable 60 EasyLink features 60 EasyLink RC key forward 61 EasyLink TV speakers 61 end of use 10 environment efforts 11 EPG enable 29 EPG menu 29 EPG overview 29 F factory settings 35 favourites list add 29 favourites list select 29 G green eco overview 11 green eco settings 11 H hearing impaired 33 EN 71 English home menu 17 home mode 44 information on Internet 14 information on screen 14 install channels manual 37 K kensington lock 12 L language menu 38 language others 38 location home or shop 44 location stand or wall mount 44 Lounge light 22 M menu add device 18 menu browse 17 menu channel list 18 menu home 17 menu language 38 menu options 19 menu setup 18 multimedia play files 31 mute TV speakers 20 N Net TV browse 23 Net TV clear h
11. Link Connected Philips EasyLink devices may apply their own picture quality processing to a video before streaming it to the TV This may interfere with the image processing of the TV Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices To enable Pixel Plus Link 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt Pixel Plus link gt On 3 Press OK to activate Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV The video image is thus stretched across the whole of your TV display without the need to create a separate subtitle bar at the bottom of the screen To enable auto subtitle shift 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Audio only mode Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby Press MN to receive audio from the connected Philips EasyLink device If available audio only mode is enabled Accept the prompt on the TV to enable audio only mode e Control the audio playback with the TV remote control Enable or disable EasyLink Remote Control Caution This is an advanced setting Verify that all connected HDMI CEC compliant devices support this setti
12. Mono or Stereo if stereo broadcasting is available 4 Press D to exit Tip Set a secondary language in the same menu You receive this language if the primary language is unavailable Menu language 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Set up network Benefits PC network If the TV is connected to your PC network you can play photos music and movies from a computer or storage device in that network Once the network is installed select Browse PC in the home menu to view PC content Net TV If the TV is connected to the PC network which is connected to the Internet you can link up your TV to Net TV The Net TV start page offers you movies pictures music infotainment games and much more all set up for your TV screen Once the network is installed select Browse Net TV in the home menu to open the Net TV start page What you need WARNING This TV complies with the EMC directive only when you use a shielded Cat5 Ethemet cable To connect the router to your TV we strongly recommend that you use an Ethernet cable that is shorter than 3 metres To connect the TV to a PC network and the Internet you need a router in your PC network Set the router to DHCP On Connect the router to the TV with a network Ethernet cable To enjoy Net TV connect th
13. Navigation buttons to set the sleeptimer The sleeptimer can be set up to 80 minutes in steps of five minutes The sleeptimer is switched off if it is set to zero minutes 4 Press OK to activate the sleep timer The TV switches to standby after the set period of time Child lock To prevent children from watching TV you can lock the TV or block age rated programmes Set or change the child lock code 1 Press fft 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock Parental rating Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings higher than your child s age 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Child lock gt Parental rating A message appears prompting you to enter the child lock code 3 Enter the child lock code with the Numeric buttons 4 Select an age rating then press OK All programmes beyond the selected age rating are blocked EN 30 For information on child lock codes see Use more of your
14. PC Accesses the content press B browser of the connected PC network 2 Select Show device keys then press e Browse Net TV Accesses Net TV OK e Scenea Switches to the Scenea wallpaper 3 Use the Navigation buttons and OK to select and use an on screen button e Show widgets Accesses widgets by online service providers Only available if connected to the Internet e Add your devices Adds new devices to the home menu e _ Setup Accesses menus that allow you to change picture sound and TV settings Browse The browse menu gives you easy access to e _ Electronic programme guide e TV channel list e Teletext EN 17 English To access the browse menu while watching TV press W 1 Press the Navigation buttons to select an item e Programme guide Accesses the Electronic Programme Guide e Channel list Accesses the TV channel list e Text Accesses teletext 2 Press OK to confirm your choice Experience Press MN to access the experience menu which provides a range of frequently used settings The experience menu gives you easy access to e Ambilight Turns Ambilight on or off e Ambilight dynamic Adjusts the speed of Ambilight response e Picture format Changes the picture format e Smart picture Frequently used picture settings e Smart sound Frequently used sound settings e Speakers Configure TV speakers for Philips EasyLink
15. Select Browse USB then press OK View slideshow Press the Navigation buttons to select a picture then press OK e To pause or stop playback press OK again e To jump to the previous or next file press m or n e Press D to exit content browser Press B to access or exit the following settings e Show info Displays the file information e _ Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e _ Slideshow speed Sets the display time for each picture in the slideshow e Slideshow transition Sets the transition from one picture to the next e Set as Scenea Sets the selected picture as wallpaper on the TV Listen to music Press the Navigation buttons to select a music track then press OK e Press a w to fast rewind or fast forward a track e Press D to exit content browser Press to access or exit the following settings e _ Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e _ Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK e Press or e to rewind or fast forward a file e Press D to exit the content browser During video playback press E to access
16. TV Switch on the digital camera If the content of your camera does not appear automatically you may need to enable Picture Transfer Protocol PTP on the camera Refer to the camera s user manual for instructions EN 57 English Dig camcorder The most practical connection for a camcorder is at the side of the TV Otherwise use an HDMI cable or the component video and audio cable YPbPr and Audio L R to connect the camcorder to the back of the TV h Audio URL LI Acco LR Channel decoder 2 Select Setup gt Channel settings gt gt Before using a SCART digital channel Decoder gt Channel decoder select the channel to decode and 3 Set the channel you want to decode assign the decoder to the SCART connector 4 Select Status then the location of the 1 Press fft decoder 5 Press OK EN 58 PC Connect a computer using one of the following cables HDMI cable DVI HDMI cable AUDIO IN DVI VGA DVI HDMI dil HDMI cable and HDMI DVI adaptor AUDIO IN DVI VGA HDMI di EN 59 English VGA cable AUDIO IN DVI VGA EM Use Philips EasyLink Enable or disable EasyLink Philips EasyLink provides several features that enable you to control devices that are connected via HDMI Connected devices must support the HDMI CEC standard and must be properly configured for EasyLink to work Note HDMI CEC functionality is k
17. USB adapter PTAO1 accessory sold separately you can connect the TV to your network wirelessly With the free Wi Fi MediaConnect software you can project your PC screen on the TV Video music or presentations that you play on your PC can be projected Available on certain models only What you need To use Wi Fi MediaConnect you need to connect the TV to your home network You need a wireless router Read more about connecting to a network in Help gt Set up the TV gt Set up network Page 39 Project your PC Install Wi Fi MediaConnect 1 Find the Wi Fi MediaConnect CD ROM that comes bundled with the PTAO1 adapter 2 Insert the CD ROM into your PC 3 Your PC starts your Internet browser and opens the Wi Fi MediaConnect download page www wifimediaconnect philips com On the website you can check the necessary PC system requirements 4 Enter the code printed on the CD ROM envelope 5 Click the Download now button to download the free Wi Fi MediaConnect software 6 Once downloaded start the file Wi Fi MediaConnect setup exe 7 Follow the on screen instructions Project your PC Name your TV If you have two or more TVs in your home network differentiate them with unique names 1 Press fft then select Setup gt Network settings gt TV network name 2 Press OK to open the on screen keyboard 3 Enter the TV name with the on screen keyboard then press OK EN 40
18. Update software Guides you through an update of the TV software e _ Software settings Advanced TV update settings e Watch demos Demos of special features available with the TV Options Option menus offer convenient settings related to what is on screen 1 Press B to see what options are available 2 To exit press B again Watch TV Switch on off or to standby To switch on e fthe front LED indicator is off press the power switch 1 on the bottom of the TV to the position e fthe front LED indicator is red press on the remote control 2 Alternatively switch on the TV from standby by pressing any key on the side of the TV Notes e The front LED indicator does not tum on when the TV is switched on e he TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behavior To switch to standby Press on the remote control The front LED indicator switches to red To switch off Press the power switch on the bottom of the TV to the o position The TV switches off Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time switch off the TV using the power switch on the bottom of the set Tip If you cannot locate your remote control and want to switch on the TV from standby press P CH on the s
19. are approximate values only Design and specifications are subject to change without notice 32PFL7605H Without stand Width 777 mm Height 472 mm Depth 42 mm Weight 9 5 kg estimate EN 69 English He De with stand ight 540 mm pth 221 mm Weight 11 6 kg estimate 37PFL7605H ew Wi He De He De ithout stand dth 898 mm ight 554 mm pth 42 mm Weight 12 kg estimate with TV stand ight 602 mm pth 242 mm Weight 15 kg estimate 40PFL7605H Wi Wi He De He De hout stand dth 966 mm ight 593 mm pth 41 5 mm Weight 13 kg estimate with stand ght 641 mm pth 242 mm Weight 16 kg estimate 46PFL7605H W He De He De U EN ithout stand Width 1103 mm ight 669 mm pth 42 4 mm Weight 17 8 kg estimate with stand ght 716 mm pth 265 mm Weight 21 4 kg estimate v 3139 137 03594 20100708 70 8 Index A age rating 30 Ambilight 13 Ambilight settings 21 Ambilight response speed 22 Ambilight switch on 21 audio language 38 audio lip sync 43 B bottom connectors 49 C CAM enable 63 CAM insert 63 care 10 channel list 18 es 29 channels hide or unhide 36 channels favouri channels install manual 37 channels rename 36 channels reorder 35 channels update 36 child lock age rating 30 child lock overview
20. connected with an HDMI cable playing an HD game HD video clip To experience the stunning sharpness and picture quality of HD TV you can watch the High Definition video clip from the Home menu Press ff gt Setup gt Watch demos on the second page of the setup menu Contact your dealer for more information Go to www philips com support to find FAQs that list the HD channels or providers in your country Network and Net TV Internet Router Network When you connect your TV to your home network you can play music photos and video from a computer or other media server on the same network Read more in Help gt Set up the TV gt Set up Network Page 39 Available on certain models only Net TV When the connected PC network is connected to the Internet you can connect your TV to Net TV Net TV offers movies pictures music and much more Read more in Help gt Use your TV gt Enjoy Net TV Page 22 Available on certain models only Important Congratulations Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Risk of electric shock or fire Never expose the TV to rain or water Never place liquid contain
21. new device press ft then select Add your devices Follow the on screen instructions HDMI An HDMI connection has the best picture and sound quality e One HDMI cable combines video and audio signals Use HDMI for High Definition HD TV signals and to enable EasyLink e The HDMI ARC connector on the TV features HDMI ARC functionality This allows output of TV audio to an HDMI ARC compliant device e Do not use an HDMI cable longer than 5 metres 16 4 feet Qe Kk kkk MN C oeecooc3 Y Pb Pr Use the Component Video Y Pb Pr connection together with an Audio Left and Right connection for sound EN 48 Match the Y Pb Pr connector colours with the cable plugs when you connect Y Pb Pr can handle High Definition HD TV signals YPbPr 200000 O SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle High Definition HD TV signals Connes 000 TV connectors overview Rear 1 NETWORK Data input from a network 2 EXT 2 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 3 SERV U For use by service personnel only 4 EXT 3 Component Y Pb Pr Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 5 f Stereo audio output to headphones or earphones Bottom 1 EXT 1 SCART Analogue a
22. own multimedia files such as photos music and videos from the USB connection on the side of the TV or directly from your PC See Use more of your TV gt Access multimedia Page 31 Access more information On screen You are reading the on screen user manual This manual contains all of the information you need to install and use this TV Access the user manual by selecting Help in the home menu Before carrying out instructions temporarily close the user manual by pressing ff on the remote control Open the user manual at the same page by selecting Help in the home menu EN 14 On the Internet A printable PDF version of this user manual is available on the Intemet It contains the latest information and detailed feature explanations not covered by this on screen user manual Access the PDF as well as other product information including FAQs and firmware upgrades at www philips com support 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators 1 wa Increases or decreases volume In he home menu these buttons allow you to move horizontally 2 ft Accesses the home menu Press again o launch an activity in the home menu 3 P CH Switches to the next or previous channel In the home menu these buttons allow you to move vertically 4 P Ambilight Switches Ambilight on or off During
23. the colour of the wall behind the TV Set Ambilight response Before you can adjust the speed of Ambilight response press fft gt Setup gt TV settings gt Ambilight gt Colour gt Pynamic Set the speed at which Ambilight responds to on screen images 1 Press illl Experience 2 Select Ambilight dynamic then press OK 3 Move the slider to set Ambilight responsiveness 4 Press D to exit the slider 5 Press OK to confirm your choice Use lounge light When the TV is on standby you can switch on Ambilight and create a lounge light effect in your room During TV standby press on the side of he TV Note It may take more than 5 seconds for he lounge light to switch on EN 22 To select another lounge light colour see Use your TV gt Use Ambilight gt Set up Ambilight Page 21 Enjoy Net TV What is Net TV Koninklijke Philips Electronics N V bears no responsibility for content provided by Ne TV service providers Net TV offers Internet services and websites tailored for your TV You can visit popular sites view infotainment rent a movie from a video store watch a TV show you missed or access widgets on your TV screen Net TV pages The most popular websites in your country have tailored their web pages for use on TV Read the newspaper headlines watch the atest video hit or check the weather forecast Net TV programme guide Once you are connected to Net TV t
24. 0HzLCD Sound e Output power RMS 20 W e Incredible Surround e Clear Sound e _ Dynamic Bass Enhancement e Mono Stereo NICAM Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60Hz z 1360 x 768 60 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60Hz z 1360 x 768 60 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50 Hz 60 Hz 1080i 50 Hz 60 Hz 1080p 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz Multimedia Supported multimedia connections e USB FAT or DOS formatted Mass Storage Class compliant only e SD card slot e Ethernet UTP5 Supported image files e JPEG jpg Supported audio video files AVI avi ideo MPEG 4 SP MPEG 4 ASP udio MPEG Layer 2 3 AC3 PEG mpg mpeg vob ideo MPEG 1 MPEG 2 PEG mp2 mp3 mpg mpeg vob dio MPEG 1 Layer 2 MPEG 1 Layer 3 PCM AC3 PEG 4 mp4 deo MPEG 4 AVC H 264 L2 CIF L4 HD audio AAC LC HE AAC Multimedia file names must not exceed 128 characters Dv lt DEES Bx ird ER lt Supported au
25. Fine tune and then press OK 3 Press a or v to fine tune the channel 4 When the correct channel frequency is selected select Done and then press OK 5 Select Store current channel to store the fine tuned channel under the current channel or select Store as new channel to store under a new channel number EN 38 Change language settings Audio subtitle teletext languages Digital TV channels may stream several audio subtitle and teletext languages with a broadcast Set preferred languages when multiple languages are available 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select one of the following settings then press OK e Primary audio Secondary audio Selects the available audio language for digital channels e Primary subtitles Secondary subtitles Selects the available subtitle language for digital channels e Primary Text Secondary Text Selects the available teletext for digital channels e Hearing impaired Enables or disables hearing impaired subtitles e Visually impaired UK only Selects he device for audio output e Volume Visually impaired UK only Adjusts the volume of the visually impaired audio e Preferred audio format Select Standard to receive standard audio format MPEG Select Advanced to receive advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo Select
26. HDMI The HDMI connection offers the best picture and sound quality If you connect a device to this TV access the Home menu to add it Press fft gt Add your devices then follow the on screen instructions Ensure that you select the TV connector that the device is connected to Read more in Help gt Use your TV gt Basic TV Menus gt Add your devices Page 18 If you connect an EasyLink HDMI CEC compliant device to the TV it is automatically added to the Home menu Access the Home menu and select the newly added device icon Read more in Help gt Connect the TV Use Philips EasyLink Page 60 In Help gt Connect the TV Page 47 you can learn to connect the most common devices through illustrations for example High Definition TV You can watch High Definition HD programmes in HD picture quality If you watch non HD programmes he picture quality will be similar to non HD TVs Your TV can display H e a Blu ray disc player connected HDMI cable playi ng a Blu ray d D video content from with an isc e an upscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air H MPEG4 EN 8 D broadcaste r DVB T e adigital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e an HD channel on your DVB C network e an HD game console for example X Box 360 or PlayStation 3
27. Project your PC Help To read the Wi Fi MediaConnect Help right click the program icon in the notification tray of the PC and select Help Specifics e You can project high definition HD or standard definition SD video depending on the processing power of your PC e Certain commercial DVD Blu ray discs may not be projected on the TV due to output content protection e The TV shows PC media files with a small delay e Wi Fi MediaConnect is only available for PC Project your PC PC requirements Minimum specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 1 8 GHz e 512 MB RAM e 200 MB free hard disk space e Wi Fi 802 11 e Internet connection Project your PC PC requirements Recommended specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 2 1 GHz e 1 GB RAM e 200 MB free hard disk space e Wi Fi 802 11n e Internet connection Network settings The TV s network settings that are used to connect to your router are standard and set to automatic This ensures easy connection with any available network If you have problems with the network connection you might want to adjust the settings so that they are appropriate for your home network If you are unsure ask someone with knowledge of network settings to help you To set specific network settings press ff gt Setup gt Network settings and press OK For more inform
28. Register your product and get support at www philips com welcome 32PFL7605 37PFL7605 40PFL7605 46PFL7605 32PFL7605C 42PFL7605C EN User Manual PHILIPS sterreich Belgi Belgique Bparapua Hrvatska Ceska republika Danmark Estonia Suomi France Deutschland E Aa a Magyarorsz g Hrvatska Ireland Italia KasakcraH Latvia Lithuania Luxemburg Luxembourg Nederland Norge Polska Portugal Rom nia Poccua Cp6uja Slovensko Slovenija Espafia Sverige Suisse Schweiz Svizzera Turkiye United Kingdom Ykpa na 0800 180 016 80080190 00800 11 544 24 01 6403 776 800142840 3525 8759 6008600 09 2311 3415 0805 025 510 0800 000 7520 0 0800 3122 1280 0680018189 0800 222778 01 601 1777 800 088774 7 727 250 66 17 52737691 67228896 40 6661 5644 0800 0230076 22 70 81 11 00800 311 13 18 800 780 903 0800 894910 0318107125 495 961 1111 381 114 440 841 0800 004537 00386 12 80 95 00 900 800 655 08 5792 9100 0800 002 050 0800 261 3302 General No 0800 331 6015 General National Rate No 0870 911 0036 0 800 500 697 Lokalni poziv Bezplatny hovor Lokalt opkald kohalik k ne tariifi paikallispuhelu num ro sans frais geb hrenfreier Anruf KA on xwpis xpewon Ingyenes hivas free Numero Verde local local local Ortsgespr ch Appel local Gratis nummer Lokalsamtale Pozosta e produkty RTV oraz AGD Chamada Gratis Apel gratuit Apel loc
29. SD card will be erased prior to the downloading of rented videos Note his TV has a standard SD card slot and the SD card is solely for use in Video store Insert and format 1 Switch on the TV 2 Before you insert the SD memory card remove the Conditional Access Module from the TV 3 Insert the SD memory card with its front label facing out into the SD card slot The TV will automatically start formatting EN 63 English 4 Leave the SD card in the slot permanently EN 64 6 Troubleshooting Contact us f you cannot resolve your problem refer to he FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the leaflet accompanying your product ake a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty General TV issues The TV does not switch on e Disconnect the power cable from the power socket Wait for one minute then reconnect it e Check that the power cable is securely connected e Check that the power switch on the bottom back of the TV is switched on The TV does not respond to remote control or side controls when switched on The TV requires some time to start up During this time t
30. TV then press OK 3 Follow the on screen instructions 5 Connect the TV First connections Power Be sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time Antenna Locate the antenna connector at the back of the TV Insert the antenna cable securely into the antenna connector Note To receive DVB S broadcasts insert the antenna cable into the SAT DVB S connector on the side of the TV This is available on certain models only Antenna T About cables Overview Before you connect devices to the TV verify which connectors are available on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of picture and sound The connections shown in this user manual are recommendations only Other solutions are possible Tip If your device only has composite RCA connectors use a SCART cinch adapter to connect the device to a SCART connector on the TV Add your devices When you have connected a device to the TV always add this device as an item in the home menu With this item in the home menu you can easily switch to view from this device EN 47 English To add a
31. TV gt Use timers and locks gt Child lock Page 30 Use subtitles On analogue channels 1 Switch the TV to an analogue TV channel 2 Press HA then select Text and press OK 3 Enter the three number page number of the subtitles page usually 888 4 Press D to exit teletext Subtitles display if available On digital channels Not supported on MHEG channels 1 Press CJ 2 In the menu that appears select Off On or On during mute then press OK Note With On during mute the TV displays subtitles only when the sound is muted with amp La ABc E ass 54 S mo z Bw Swe 2 ge 2 PHILIPS TELEVBION Subtitle language This feature is only supported on selected digital channels 1 While watching TV press B 2 Select Subtitle language 3 Select a subtitle language from the list then press OK Note More information about language settings is available in Set up the TV gt Change language settings gt Audio Subtitle Teletext languages Page 38 Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device You can access the USB content browser using one of the following methods e When watching TV connect the USB device to the USB port on the side of your TV e Press fft
32. TV standby switches lounge light on or off 1 Ambient sensor remote control sensor Remote control Overview l 1 amp Standby Switches the TV to standby if it is on Switches on the TV if it is in standby 2 ft Home Accesses the home menu 3 UJ Browse Accesses the browse menu to select TV channel list the Electronic Programme Guide and teletext 4 av Navigation buttons Navigates menus and selects items 5 rs Previous Next Switches channels Also skips through pages of a menu and between tracks albums or folders 6 OK Confirms an entry or selection EN iL English 7 um Experience Accesses the experience menu 8 E Options Accesses options for the current activity or selection 9 Volume and Mute Increases or decreases volume mutes or restores audio E Sas 10 L EX DEF emmen 10 Colour buttons Selects tasks or options Not supported in MHEG mode 11 0 9 Numeric buttons Selects a channel or setting 12 Picture format Selects a picture format 13 B Subtitle Enables or disables subtitles 14 D Back Retums to a previous menu screen Press and hold to retum to watching TV Not supported in MHEG mode Batteries Open the battery cover on the back of the remote control to insert the batteries Type AAA LRO3 1 5 V or Type CR2032 3 V EN 16 Make sure the and ends of the batteries
33. Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press D to exit Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 Press the green button to turn on audio feedback or press the red button to tum it off 3 Press D to exit EN 33 English 4 Set up the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching TV press fft 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Start then press OK Follow the on screen instructions to choose your preferred settings Smart picture settings Use the Smart picture experience menu O access frequently used picture settings 1 While watching TV press IN 2 Select Smart picture then select one of he following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e _ Natural A natural picture setting Cinema Ideal settings for watching movies Game Ideal settings for gaming Energy saving The most energy conscious sett
34. al 0 15 USD minute Lokalni poziv Bezplatny hovor lokalni klic Tel fono local gratuito solamente para clientes en Espana Lokalsamtal Schweizer Festnetztarif Tarif r seau fixe France Sehirici arama free National rate This information is correct at the time of press For updated information see www philips com support Contents Get started 4 TV Tour 4 Important 9 Position the TV 12 Product highlights 13 Access more information 14 Use your TV 15 Overview 15 Side controls and indicators 15 Remote control 15 Basic TV menus 17 Watch TV 19 Watch a connected device 21 Use Ambilight 21 Enjoy Net TV 22 Use more of your TV 28 Use teletext 28 Favourite channels 29 Use EPG 29 Use timers and locks 29 Use subtitles 30 Access multimedia 31 Use Scenea 32 Universal access 33 Set up the TV 34 Change picture and sound settings 34 Change channel settings 35 Install channels 3 Change language settings 38 Set up network 39 Change other settings 43 Update software 44 Reinstall the TV 46 Connect the TV 47 First connections 47 About cables 47 TV connectors overview 49 Connect devices 50 Connect more devices 56 Use Philips EasyLink 60 Use a CAM 63 Insert SD card 63 Troubleshooting 65 Contact us 65 General TV issues 65 TV channel issues 65 Picture issues 65 Sound issues 66 HDMI connection issues 66 USB connection issues 67 etwork connection issues 67 Technical data 68 Overvie
35. amically to match lighting conditions Custom tint Customises tint setting Pixel Precise HD Accesses advanced settings including HD Natural Motion 100 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma e PC mode Enabled by default if you select Computer in the home menu If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content If a PC is connected via HDMI or VGA this option is enabled by default e Light sensor Enables dynamic adjustment of the screen display to match lighting conditions e Picture format Changes the picture format e Screen edges Changes the picture size e Picture shift Adjusts the position of he picture Not applicable if selected picture format is Auto zoom or Wide screen Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IN 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menus in Setup Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for
36. ate channels The update may take a few minutes Other options Select audio language If the TV channel has multiple or dual sound broadcast you can select the preferred audio language 1 While watching TV press amp e Audio language Select the audio language for digital channels e Dual I Il Select the audio language for analogue channels Select video stream for DVB S channel only If available you can view different video stream of the channel depending on broadcast service provider 1 While watching TV press amp 2 Select Video selection to view the various selections Install channels Automatic install When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and install all available TV channels Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Search for channels then press OK 3 Follow the on screen instructions to complete the channel installation 4 Once complete select Finish then press OK Tip Press W to see the channel list Notes e During installation leave Settings unchanged unless your digital provider provides you with the specific values to enter e When digital TV channels are found the ist of installed channels may display empty channel numbers You can rename reorder or uninstall these
37. ation on Page 41 access the PDF version of this user manual on the Internet at www philips com support PC media server settings TVersity v 0 9 10 3 Microsoft Windows Enable media sharing n Microsoft Windows start TVersity Click he Settings tab and click the Start Sharing button A pop up window tells you that the media server service is started Click OK Set folders for media sharing In TVersity click the Sharing tab F e um Memento tnm as j iome b mann j Click the green plus icon and select Add folder In the Add media pop up window click the Browse button Fie uem bemand Snie In the Browse for Folder window select a folder with music photos or videos that you want to share and click OK Twonky Media v4 4 2 on Macintosh OS X Enable media sharing In Mac OS X start Twonky Media Twonky Media appears In the Basic Setup box click Clients Security Clients Security settings appear Click Enable sharing for new clients automatically then click Save Changes Media sharing is enabled Add folders for media sharing EN 41 English In the Basic Setup box click Sharing Sharing settings appear Click Browse to add a folder location Click Add new content directory to add more folders When all folders are added click Save changes then click Rescan content directories Media files are ready to be accessed from the TV Microsoft Windows Med
38. ble to certain models only Net TV does not work f the connection to the router is properly set up check the router connection to the nternet Browse PC or Net TV access is slow Refer to your router s user manual for information on transfer rate and other factors of signal quality You need a high speed Internet connection for your router EN 67 English 7 Technical data Overview Product information is subject to change without notice For detailed product information go to www philips com support Power and reception Power e Mains power AC 220 240 V 50 60 Hz e Standby power 0 15 W e Ambient temperature 5 to 40 degrees Celsius e For power consumption see the product specifications at http www philips com support Reception e _ Antenna input 5ohm coaxial IEC75 e TV system DVB COFDM 2K 8K e _ Video playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB C Cable DVB S Satellite MHP Multimedia Home Platform Available in Italy only e Tuner bands VHF UHF S Channel Hyperband Available on certain models only Display and sound Picture Display e Display type LCD Full HD W UXGA e Diagonal size 32 inch 81 cm 37 inch 94 cm 40 inch 102 cm 46 inch 117 cm e _ Aspect ratio Widescreen 16 9 e Panel resolution 1920 x 1080p 100 Hz e Pixel Precise HD picture enhancement e 1080p 24 25 30 50 60 Hz processing EN 68 e 10
39. button to select Hearing impaired 3 Press the green button to switch on hearing impaired audio and subtitles press the red button to switch it off 4 Press D to exit Tip To verify whether a hearing impaired audio language is available press B and select Audio language Languages with an ear icon indicate hearing impaired support Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 While watching TV press amp 2 Press the green button to select Visually impaired 3 Use the following buttons to select e Red Off Turn off visually impaired audio e Yellow Headphones Hear visually impaired audio from headphones only e Green Speakers Hear visually impaired audio from speakers only e Blue Speakers headphones Hear visually impaired audio from speakers and headphones only 4 Press D to exit Note The green and yellow buttons are not applicable if EasyLink Remote Control is enabled For more information see Connect the TV gt Use Philips EasyLink gt EasyLink features Page 60 Tip To verify whether visually impaired audio is available press EF and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 In the
40. channels Access DVB C or DVB T channels If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network 1 While watching TV press fft 2 Select Setup gt Channel settings 3 Select Channel installation gt Antenna or Cable DVB 4 Select one of the following settings e Antenna DVB T Access free to air antenna or digital DVB T channels e Cable Access cable or digital DVB C channels 3 Press OK to confirm your choice 4 Press D to exit The TV switches to the selected channel list Install analogue channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct If you are prompted to enter a code enter 8888 1 While watching TV press fft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation gt System then press OK 3 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual installation menu select Find channel then press OK 2 Press e he Navigation buttons or Numeric buttons to manually enter the channel frequency e The Navigation buttons to select Search Press OK to automatically search for the next channel 3 When the correct channel f
41. cted HDMI CEC audio device switches to system audio control Thereafter TV audio is streamed through the connected device e Amplifier Streams audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio will continue to stream from TV speakers if EasyLink was selected If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode he HDMI 1 connector is HDMI Audio Retum Channel ARC compliant Use it to output digital HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device without the need for an additional digital audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI ARC connectors EN 62 Enable or disable HDMI ARC Note Enabling HDMI ARC automatically adds the device to the home menu 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt HDMI 1 ARC gt On or Oft 3 Press OK to activate Use a CAM Insert and activate a CAM Caution Be sure to follow the instructions described below Incorrect insertion of a Conditional Access Module CAM may damage both the CAM and your TV Notes e This TV supports Cl as well as CI CI allows service providers to offer premium HD digital programmes with a high level of copy protection e Refer to the do
42. cumentation from your service operator on how to insert a smart card into the Conditional Access Module LI 1 Switch off the TV 2 Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV 3 Push the CAM in as far as it will go and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use as digital services will be deactivated Access CAM services 1 After inserting and activating the CAM press B 2 Select Common interface then press OK 3 Select the CAM provider and press OK Watching a CAM service If a CAM is inserted and subscription fees are paid the TV shows the programme from the digital TV service provider The applications functions content and on screen messages vary by CAM service Insert SD card Memory size To download rented videos from Net TV insert an SD memory card into the TV SD card slot Once formatted leave the card permanently in the slot SD memory size Use a blank SD memory card The SD card should have a minimum storage capacity of 4 GB For high definition video ensure that you use an SD card with at least 8 GB of storage capacity Caution Ensure that you follow the instructions described in Connect the TV gt Insert SD card gt Insert and format Page 63 Incorrect insertion of the SD card may damage your SD card All existing content on the
43. demo Change channel settings Reorder channels After installation you may want to reorder the channel list to suit your preference 1 While watching TV press W 2 Select Channel list then press OK EN 35 English 3 In the channel list press amp 4 Select Reorder then press OK 5 Select the channel to reorder move it to the desired location then press OK 6 Select Insert to insert the channel into the desired location Swap to swap location with another channel or Cancel to cancel the reorder 7 Press OK to activate Rename channels After installation you may want to rename channels to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Rename then press OK 5 In the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once complete press the Navigation buttons to select Done e To clear the entry select Clear e To cancel select Cancel 7 Press OK to confirm your choice 8 Press 2 to exit Hide or unhide channels Hide channels Hide channels from the channel list to prevent unauthorised access 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list select the channel to hide then press amp 4 Select Hide channel then press OK The channel is hidden
44. dio video files WMV wmv video WMV9 VC1 WMA wma audio WMA v2 to v9 2 MKV mkv video H 264 audio HE AAC AC3 Multimedia file names must not exceed 128 characters Supported DLNA compliant media server software e Windows Media Player for Microsoft Windows e Twonky Media for Microsoft Windows and Mac OS X e _ Sony Vaio Media Server for Microsoft Windows e Versity for Microsoft Windows e Nero MediaHome e DIXiM for Microsoft Windows XP e Macrovision Network Media Server for Microsoft Windows e Fuppes for Linux e uShare for Linux Supported DLNA audio video files WMV wmv video WMV9 VC1 MPEG mp2 mp3 mpg mpeg vob audio MPEG 1 Layer 2 MPEG 1 Layer 3 LPCM AC3 MPEG 4 mp4 video MPEG 4 AVC H 264 L2 CIF MPEG 4 AVC H 264 L4 HD audio AAC LC HE AAC MKV mkv video H 264 audio HE ACC AC3 Connectivity Rear e EXT 2 SCART RGB CVBS e EXT 3 Component Y Pb Pr Audio L R eadphones Stereo 3 5 mm mini jack e SERV Service port etwork Ethernet Bottom e EXT 1 SCART RGB CVBS DMI 1 ARC HDMI Audio Retum Channel DMI 2 3 HDM e DIGITAL AUDIO OUT Coaxial e AUDIO IN DVI VGA stereo 3 5 mm mini jack e Antenna 75 ohm coaxial e VGA PC input Side HDMI USB SD card Common Interface Dimensions CI Note Dimensions and weights
45. e TV to a router with a high speed connection to the Internet You can also connect this TV to a PC network wirelessly via an optional wireless USB adapter Check with your local retailer for purchase details Internet J Bs Router The PC network feature is DLNA 1 5 certified You can use Microsoft Windows XP or Vista Intel Mac OSX or Linux on your computer To share PC content on your TV you need recent media server software on your computer Windows Media Player 11 or similar The media server software needs to be set to share files with your TV For a list of supported media server software read Technical data gt Multimedia Page 69 Note If the apparatus does not return to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Wired installation Connect the router to the TV using a network cable and switch on the router before you start the network installation To start the wired network installation close he user manual press fft gt Setup gt Connect to network and press OK Follow the instructions on screen to install he wired network The TV constantly searches for a network connection f asked agree to the End User Licence Agreement Find the latest End User Licence Agreement at www philips com Wi Fi Ready Project your PC Introduction EN 39 English This TV is Wi Fi Ready With the Wireless
46. ected to the Internet the TV displays a message about the availability of new software at start up On screen Help Before updating the on screen Help ensure you have the following e An empty USB flash drive The USB flash drive must be FAT or DOS formatted e Do not use a USB hard drive e APC with Internet access e An archive utility that supports the ZIP file format for example WinZip for icrosoft Windows or Stufflt for acintosh Before updating Help check the current version installed on your TV If the version of Help on your TV is lower than the version available at www philips com support download and install the latest Help file 1 Press fft 2 Select Help then press OK On screen Help is displayed 3 Select Technical data gt Dimensions Navigate to the last page of this section and note the version number Note The version number is a 12 digit number where the last digit indicates the version of Help installed on your TV For example if the version on the TV is 3139 137 03583 3 represents the version of Help currently installed 1 Insert the empty USB flash drive into a USB connector on your PC 2 On your PC create a folder called upgrades in the root directory of the USB flash drive 3 In your web browser navigate to www philips com support 4 On the Philips Support site find your product and locate the Help file for your TV The Help file a up
47. ed You may need to use a Conditional Access odule to access content Check with your operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode Remove the e sticker by setting the TV to Home mode then restarting the TV See Setup the TV gt Change other settings gt TV location Page 44 for more information The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate EN 66 e Setthe TV picture format to unscaled Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the DMI CEC enabled EasyLink compliant TS device Sound should be heard from the HTS speakers There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection s
48. ers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e wo people are required to lift and carry a TV that weighs more than 25 kg 55 lbs EN 9 English e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no re
49. experience See Use your TV gt Use Ambilight Page 21 Digital TV n addition to normal analogue TV broadcasts your TV can receive digital errestrial DVB T broadcasts Where available your TV can also receive digital cable DVB C and digital radio broadcasts DVB Digital Video Broadcasting gives you a better picture and better sound quality Some broadcasters also have several audio speech and or teletext languages available with digital broadcasts Programme guide EPG Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre e _ Set reminders when programmes start EN 13 English e Setup preferred EPG channels Notes e EPG is not available in all countries e Formore information on EPG see Use more of your TV gt Use EPG Page 29 Net TV Net TV allows you to enjoy movies music and other infotainment from the Internet directly on your TV screen See Use your TV gt Enjoy Net TV Page 22 To enjoy Net TV you must connect the TV to a network See Set up the TV gt Set up network Page 39 Video store The Philips Video store gives you access to a wide range of high quality movies that you can watch directly on your TV See Use your TV gt Enjoy Net TV gt Video stores Page 25 Multimedia View or play your
50. g file is compressed into a zip archive EN 45 English 5 If the Help file on the Philips Support site is a later version than the file in your TV click it to save the file to the USB flash drive 6 Using the archive ut lity extract the zip file to the upgrades folder on the USB flash drive 7 The upg 8 Di PG sconnect restored retry the reoccurs Care elp file is extracted he USB flash drive from the Do not switch off the TV or remove he USB fl f a power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue he update as soon as power is ash drive during the update f an error occurs during the update procedure If the error contact Philips Consumer 1 Switch on the TV 2 Connect the USB flash drive containing the upg Help file to the USB connector on the TV Disco from 4 Se the TV 3 Press fft Setup gt Software settings gt Local updates The updates screen appears 5 Selec lec nnect all other USB devices the upg Help file and press OK A message will display the update status Follow the on screen instructions to complete the EN 46 update and restart your TV Reinstall the TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press fft 2 Select Setup gt TV settings gt Reinstall
51. gaming Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports e a 3 Press OK to confirm your choice 4 Press D to exit More sound settings 1 Press fft 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to adjust e Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e _ Bass Adjusts the bass level e Treble Adjusts the treble level e Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e Balance Adjusts the balance of the eft and right speakers to best suit your istening position Reset to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 While watching TV press fft 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset back to the factory default Starta TV demo Start a demo to find out more about your TV s features Note Demos are not supported on MHEG channels 1 While watching TV press fft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press D to exit the
52. gs gt Energy efficient settings Page 43 for more information Built in energy efficient settings e Low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality e Dedicated power switch Completely cut off power to the TV with the dedicated power switch located on the bottom of the set e Advanced power management The advanced power management of this TV ensures the most efficient use of its energy To view how your personalised TV settings affect the TV s relative power consumption press ff and select Setup gt Watch demos gt Active Control We continually focus on lowering the environmental impact of our innovative consumer products We aim our efforts towards making environmental improvements during manufacturing including reduction of harmful substances promoting energy efficient use end of life instructions and product recycling EN 11 English EUROPEAN UNION ECOLABEL Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 Thanks to our environmental efforts this TV is awarded the European Ecolabel Find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV at the Philips website for your country at www philips c
53. he TV Picture issues The TV is on but there is no picture or the picture is distorted e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source e Check that the external device or source is properly connected EN 65 English There is sound but no picture Check that the picture settings are correctly set There is poor TV reception from an antenna connection e _ Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e freception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambl
54. he TV programme guide uses the Internet to gather its information Missed a programme f a broadcaster offers this service you can catch up with a favourite programme that you have missed You can watch the programme at a time that suits you Video stores With Net TV you can rent your favourite movie from an online video rental store New services New services are added regularly Access the Net TV pages regularly to discover new services Notes e Net TV services vary in each country e With Net TV you can link up to the Internet or view any website However some websites are not designed to be viewed on a TV screen and certain plug ins to view pages or videos for example are not available on your TV e he number of services available on Net TV can change The functionality of services can change as well These changes are updated automatically You can view the latest services added or changed in the New category e Net TV displays one page at a time and in full screen e _ You cannot download and save files or install plug ins on this TV What you need To enjoy Net TV connect the TV to a router with a high speed connection to the Internet Read more at Set up the TV gt Set up network Page 39 Once connected press ft and select Browse Net TV to start the Net TV on screen setup Read more at Use your TV gt Enjoy Net TV gt First Use Page 23 Internet A ZZ Router F
55. he TV will not respond to he remote control or side controls This is normal behaviour The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred language For more information see Set up the TV gt Change language settings gt Menu language see Menu language on page 38 When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance When the TV is in standby mode a startup splash screen is displayed then returns to standby mode This is normal behavior The startup screen is displayed when the TV is disconnected from the mains and reconnected To switch on the TV from standby press on the remote control or press any key on the side of the TV TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation Check that the TV supports DVB T DVB C or DVB S in your country See the listed countries on the back of t
56. he software use one of these options a update from digital broadcast b update with USB c update from the Internet For more information see the following pages f available your TV can receive software updates via digital broadcasts f an update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted Before performing this procedure be sure to e Set aside some time to complete the entire update ave available a USB flash drive with at east 256 MB of storage space ave access to a computer with a USB port and internet access 1 Press fft 2 Select Setup gt Update software then press OK The update assistant starts Follow the on screen instructions to complete the update Note If you already have the upgrade file downloaded onto a USB flash drive connect it to the TV Then select Setup gt Software settings Local updates If the TV is connected to a router that is connected to the Internet you can update the TV software directly from the Internet You need a high speed Internet connection 1 Press ff gt Setup gt Update now and press OK 2 Select Internet and press OK Follow the instructions on screen When the update is done the TV switches off and back on again automatically Wait for the TV to switch back on do not use the Power switch on the TV If the TV is conn
57. ia Player 11 Note The instructions are applicable to both Microsoft Windows XP and Vista Enable media sharing In Microsoft Windows start Windows Media Player 11 Windows Media Player appears jj eot Uem ars Coats Mart mn m Comune daba Pl rent Aia T jp Paton mand Vak wa n ae omm vee aten see nams Mea Wig ae us Uwes bt mamas m dnt hem to ire tem egen tose Dem Mep ets Lig the Line vols D S EN 42 In the Media Sharing window tick Share my Media and click OK Meds Wheres ea a Pde mm morm rcl m men cmt papas men anm Oet mene termes em ren s rs am Mes mense Pen Ong mer Seam Par ns te oe mtm cm emmer f no network connection is found and you are unable to tick this box click the Networking button to show the Network and Sharing Centre window o A 5 ve eme Set Network discovery to On Set File sharing to On Go back to the Media Sharing window in Windows Media Player and tick the Share My Media box Click OK When the TV is connected by the router to the PC and everything is switched on the Media Sharing window will detect the TV as an Unknown Device Select the device and click Allow Meden L dem and diem uam omma aet nime in na come ser mut Soma tore Dm m P Fem m di ie ee uR ed De rn me Di Don mm cm Omen On en en var ent goa aed mda my toe fum tame st an frt arum Le Cmm To change particular settings on media
58. ide of the TV Switch channels e Press pea on the remote control or P CH on the side of the TV Press LLI then select Channel list to use the channel list e Press 2 to retum to the previously viewed channel EN 19 English e Enter a channel number using the Numeric buttons To view analogue or digital channels only Filter the channel list to access analogue or digital channels only 1 In the channel list press amp 2 Select Select list gt Analogue or Digital then press OK Depending on your selection only digital or analogue channels become available Adjust volume To increase or decrease volume e Press on the remote control e Press aa on the side of the TV To mute or unmute sound e Press to mute the sound e Press again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 35 Use Smart picture settings Use the Smart picture experience menu to access frequently used picture settings 1 While watching TV press INL 2 Select Smart picture then select one of the following settings Personal Sets the TV to your personal preferences set in the Picture menus in Setup EN 20 e _ Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal setti
59. ing the thickness of your wall mount to the screw length shown in the graphic min 15 mm max 18 mm Placement e _ Before positioning the TV read all safety precautions See Get Started gt Important gt Safety Page 9 e Position the TV where light does not shine directly on the screen e he ideal distance from which to watch TV is three times its diagonal screen size For example if the diagonal screen size of the TV is 116 cm 46 the ideal viewing distance is approximately 3 5 m 138 from the front of the screen e While seated your eyes should be level with the centre of the screen e Forthe best Ambilight effect position the TV 25 cm away from the wall Product highlights Full HD LCD display his TV is equipped with a full High Definition HD LCD display supporting the maximum HD resolution of 920 x 1080p This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colours The LED backlight of the display offers exceptional picture contrast with exceptional energy saving Ambilight Ambilight is the lighting technology that emanates from the back of the television onto the wall This innovative technology automatically adjusts the colour and brightness of the light to match the TV picture This creates an unprecedented improvement in viewing experience The light also reduces eyestrain thus providing a more relaxing viewing
60. ings e Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos e Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit More picture settings 1 Press fft EN 34 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust Smart picture Accesses pre defined smart picture settings Reset Resets to factory default settings Contrast Adjusts the intensity of bright areas keeping dark areas unchanged Brightness Adjusts the intensity and details of dark areas Colour Adjusts colour saturation Hue Compensates colour variations in NTSC encoded transmissions Sharpness Adjusts sharpness in the image Noise reduction Filters and reduces noise in an image Tint Adjusts the colour balance in an image Custom tint Customises tint setting Pixel Plus HD Accesses advanced settings including 100 Hz Clear LCD Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement HD Natural Motion Gamma PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content Light sensor Adjusts settings dyn
61. irst use Registration benefits By registering with Philips you can enjoy exclusive benefits and receive updates on product information Parental control benefits With Parental control switched on you can lock and unlock services and or categories of services You can also unlock some services that are not suitable for children These services are locked from the start Parental control specifics e Only services on the Net TV pages can be locked Advertisements and Internet websites cannot be locked e Services are locked per country Categories are locked for all countries Initial setup 1 Agree to the Terms of Use 2 Register for Net TV 3 Switch on parental control How to register To register you need an email address and a PC connected to the Internet If you skip the registration during the initial setup you can register from the Net TV Start page later To start the Net TV registration enter your email address on screen To open the on screen keyboard highlight the text field then press OK Enter the characters one by one Select Register and press OK A message will appear if a registration email has been sent to your email address Open the email on your PC and click the link to the registration form Complete the form and click the button to submit On the TV select OK and press OK to open the Net TV Start page Switch on Parental control The first time you open the Net TV S
62. istory 25 Net TV online TV 27 O options menu 19 P PC network settings 40 EN 72 PC network media server 41 PC network wired 39 PC connect 59 picture format 21 picture settings 34 position TV 13 power 68 R rear connectors 49 recycle 10 register product 9 remote control on screen 17 remote control overview 15 rename channels 36 reorder channels 35 S safety 9 Scenea enable 32 Scenea lounge light 22 Scenea upload picture 32 screen care 10 SD card 25 63 SD card memory size 63 settings assistant 34 settings picture 34 settings sound 35 shop mode 44 side connectors 50 sleeptimer 29 smart card 63 smart picture 20 smart sound 20 software digital update 45 software Internet update 45 sound settings 35 specifications 68 standby 19 subtitle analogue 30 subtitle digital 30 subtitle language 38 subtitles language 30 T echnical specifications 68 eletext 2 5 29 eletext digital text 28 eletext dual screen 28 eletext enable 28 eletext enlarge 28 eletext language 38 eletext menu 28 eletext search 28 eletext subpages 28 eletext Table Of Pages 28 U universal access enable 33 V Video store format SD card 25 63 Video store rent videos 25 visually impaired 33 volume adjust 20 vol
63. lete you can download the video to the video memory During the download you can carry on watching the TV programme until the TV notifies you that the video is ready to play If you cancel a download you can still download the video until the rental period expires Start watching To start watching a downloaded video press select Net TV gt Video stores and press OK With your login enter the online store where you rented the video and select the video from the list of downloaded videos Select the video and press OK to play Widgets Widgets are small information panels at the bottom of your screen They offer information on a variety of subjects such as breaking news scheduled movies and airport info Widgets come from the Internet and new widgets are added regularly Widgets do not have sound or video What you need To show widgets on screen you need a high speed Internet connection to the TV Read more about connecting to the network in Set up the TV gt Set up network Page 39 Show Widgets To access Widgets press select Show widgets and press OK You can also open or close the Widgets directly with the Blue key on the remote control The Widgets appear at the bottom of the screen You can replace the initial widgets with other widgets EN 26 Select a widget To select a widget press or to position the selection highlight Although only 4 widgets are shown on screen
64. line TV service you need a high speed Internet connection to the TV Read Set up the TV gt Set up network Page 39 Open Online TV from Net TV To open an Online TV service from Net TV press fft select Browse Net TV and press OK In the Net TV services look for the icon of the TV channel that broadcasts the programme you want Select the service and press OK Open Online TV on a channel To open the Online TV service of a TV channel directly press the Red key If this service is available the TV will open the page of the broadcaster The availability of Online TV services varies by country EN 27 English 3 Use more of your TV Use teletext Select a page 1 Press W 2 Select Text then press OK 3 Select a page by e Entering the page number with the Numeric buttons e Pressing ar or res to view the next or previous page e Pressing the Colour buttons to select a colour coded item 4 Press D to exit teletext Access teletext options 1 When in teletext press B 2 Select an option e Freeze page Unfreeze page Freezes or unfreezes the current page e Dual screen Full screen Enables or disables dual screen teletext which splits the current channel or source to the left of the screen with teletext on the right e _ T O P overview Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers e E
65. line up correctly and are marked inside Remove the batteries if you are not using the remote control for a long time Dispose of batteries according to the end of use directives Read Get started gt Important gt End of use Page 10 Refers to the following for the location of the different battery compartments For remote control with AAA batteries end to end For remote control with AAA batteries side by side For remote control with coin cell batteries Basic TV menus Home The home menu gives you easy access to connected devices picture and sound settings and other useful features 1 Press fft 2 Select an item in the home menu then press OK to access the menu 3 To exit the home menu press ff or D EN To start an activity highlight the desired item On screen remote control Note Available if the connected device is with the Navigation buttons and press OK HDMI CEC compliant e Help Accesses the electronic user An On Screen Remote Control OSRC manual gives you easy access to commonly used e Watch TV Switches back to the functions The on screen buttons available differ depending on your TV setup and features of the connected HDMI CEC antenna source if another source is selected e Browse USB If a USB storage device device is connected accesses the content To access the OSRC browser 1 While watching TV or a connected device e Browse
66. mat an SD memory card as video memory insert the SD card into the SD slot The TV will automatically start to format the SD card If the write speed is insufficient for video transfer the TV will reject the SD card Once formatted leave the card permanently in the SD slot Read Connect the TV gt Insert SD card Page 63 View a video store To view a video store press select Net TV gt Video stores and press OK The Video stores page shows the available stores for your country To view a store select its icon and press OK Rent a video To rent a video select its icon on the video store page and press OK In most cases you can rent a video for 1 day or for a couple of days or even just 1 hour The way you select and rent a video varies from store to store Payment The store will ask you to log in or to open a new login account if you don t already have one The login might consist of your email address and a personal PIN code When you are logged in you can select the payment method a credit card or a value code in most cases Consult the video store website for more information on its payment terms EN 25 English e To enter a number code PIN use the Numeric buttons on the remote control e To enter an email address select the text field on the page and press OK Select a character on the keyboard and press OK to enter it Download the video Once payment is comp
67. n press OK 3 Use the Navigation buttons and OK to select and use an on screen button 4 Press D to exit Configure TV speakers You usually connect the TV to an HDMI CEC compliant device such as a HTS using both an HDMI cable for video and a digital audio cable for audio You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant see Connect the TV gt Use Philips EasyLink gt Use HDMI ARC Page 62 EN 61 English Configure TV speakers 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select one of the following options then press OK e Off Turn off TV speakers e On Turn on TV speakers e EasyLink TV audio continues to be streamed through the TV speakers Switch the TV audio to the connected HDMI CEC audio device through the experience menu e EasyLink autostart Turn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Switch TV audio in experience menu If EasyLink or EasyLink autostart are selected access the experience menu to switch the TV audio While watching TV press UHU Use HDMI ARC audio to an HDMI Home Theatre System Home Theatre System ET 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Streams TV audio through TV speakers until the conne
68. ng Devices that do not support this setting will not respond to commands from the TV remote control 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt EasyLink Remote Control gt On or Off 3 Press OK to activate Notes e fyou cannot exit from the connected device s menu press gt e To switch back to TV control press Li and select Watch TV e To control another device press f and select the device from the home menu e A summary of EasyLink buttons you can use with the TV remote control is available at Connect the TV gt Use Philips EasyLink gt EasyLink buttons Page 61 EasyLink buttons Control HDMI CEC compliant devices with the following buttons on the TV remote control e OK Starts pauses or resumes playback on the connected device Also activates a selection or accesses the menu of the device e Previous m Next Searches backwards and forwards on the connected device e Numeric buttons When EasyLink is enabled selects a title chapter or track e amp Options Displays the menu of the connected device When ft is pressed the TV menu is displayed e c Standby Press to enable one touch prem This switches the TV and the connected device to standby Other EasyLink buttons are available via On Screen Remote Control OSRC To access the OSRC 1 While watching a connected device press amp 2 Select Show remote control the
69. ngs for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings e Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos e Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit Use Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IEU 2 Select Smart sound then select one of the following settings e Personal Sets the TV to you personal preferences set in the Sound menus in Setup e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 5 3 Press OK to confirm your choice 4 Press D to exit Change picture format Change the picture format to suit your viewing experience 1 Press mm 2 Select a picture format then press OK to confirm Note You can access picture formats via the experience menu INI and the Setup menu The follo
70. nlarge Normal view For more comfortable reading you can enlarge the teletext page Press the Navigation buttons to move around the enlarged screen e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e Cycle subpages Cycles through subpages automatically if subpages are available EN 28 e Language Switches to a different language group to display a language correctly when that language uses a different character set 3 Press B to exit the options menu Select a teletext language Some digital TV broadcasters have several teletext languages available You can set your primary and secondary language 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Primary Text or Secondary Text 3 Select your preferred teletext languages then press OK Select subpages A teletext page number can hold several subpages These subpages are shown on a bar next to the main page number When available on a teletext page press or w to select subpages Search teletext 1 When in teletext press OK to highlight the first word or number 2 Press the Navigation buttons to skip to the word or number to search 3 Press OK to begin the search 4 Press a until no word or number is highlighted to exit the search Use digital teletext Some digital TV broadcasters offer dedicated digital text or interactive ser
71. nown by other names on other brands Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink To enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt On or Off then press OK EasyLink features With Philips EasyLink enabled the following features are available One touch play When you play content from an HDMI CEC compliant device the TV switches on from standby and switches to the correct source EN 60 One touch standby When you connect your TV to an HDMI CEC compliant device pressing amp on the TV remote control switches the TV and all connected HDMI devices to standby mode System audio control When you connect your TV to for example an HDMI CEC compliant Home Theatre System HTS your TV speakers automatically mute and audio from the TV plays through the HTS For more information about system audio control and other types of TV speaker configurations see Connect the TV Use Philips EasyLink gt TV speakers Page 61 EasyLink Remote Control EasyLink Remote Control allows you to control HDMI CEC compliant devices using your TV remote control To enable EasyLink Remote Control see Connect the TV gt Use Philips EasyLink gt Enable or disable EasyLink Remote Control Page 61 Pixel Plus
72. olumn on the left and press OK Options Press EF Options to select the following e _ Lock service e Mark favourite e Disable parental control e Show remote control e Reload page e Zoom page e _ Security info e Clear Net TV memory Lock service To lock a Net TV service select its icon and press B Options Select Lock service and press OK The service icon is marked with a lock icon To open a locked service you must enter your 4 digit code Once you have opened a locked service you can delete the lock Mark favourites To mark a service as a favourite select the service icon and press B Options Select Mark favourite and press OK EN 24 You can mark up to 12 services as favourites All your favourite services are shown on the Net TV Start page In Services favourite services are marked with a star Only Net TV services can be marked as favourites Advertisements and Internet websites cannot be marked Unmark favourites To Unmark a favourite select the icon of a favourite service and press Options and select Unmark favourite Disable parental control To switch off Parental control press amp Options and select Disable parental control Enter the 4 digit code to disable Parental control Show remote control eys like Play Rewind 4 and Fast Forward PP can be called up with Show remote control Press B Options and select Show remote control With these key
73. om Information on end of use Find out about the correct disposal of this TV and batteries see Get started gt Important gt End of use Page 10 Use a Kensington lock Your TV is equipped with a Kensington security slot on the bottom of the TV Purchase a Kensington anti theft lock not supplied to secure the TV Position the TV Wall mount To mount the TV purchase a Philips TV mount or a compatible TV mount Check your TV screen size and match it against the list for the type of wall mount to purchase EN 12 32 inches 81 cm 200 mm x 300 mm M6 37 inches 94 cm 200 mm x 200 mm M6 40 inches 102 cm 200 mm x 200 mm M6 42 inches 107 cm 200 mm x 200 mm M6 46 inches 117 cm 300 mm x 300 mm M8 Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5 cm 2 2 from the back of the TV For 32 inch to 42 inch TVs Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 11 mm max 13 mm For 46 inch TVs Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by add
74. on a TV screen and certain plug ins e g to view pages or videos are not available on your TV Open an Internet site To go to an Internet page select Internet and press OK Use the on screen keyboard to enter the web address you need Select a character and press OK to enter it in the address line at the top of the page Once you have entered the address select Go and press OK to load the Internet website Use the Navigation buttons to navigate to the available links on an open Internet page and press OK to go to the link Internet history Net TV will automatically add every site you visit to the history list Later you can select a site icon in the list and press OK to open it To scroll through the history list use the Navigation buttons Clear Net TV history With a site icon selected in the history list you can clear the whole list Press B Options and select Clear history Video stores With this TV you can rent a video from an online video store 1 Open a video store You may need to register or enter your login 2 Select a video 3 Make the online payment 4 Download the video 5 Start watching What you need To rent and download a video you need a high speed Internet connection to the TV Read more about connecting to the network in Set up the TV gt Set up network Page 39 You also need an SD memory card to insert into the TV SD card slot Formatting an SD card To for
75. per on your TV Make sure that the location of your TV is set to Home mode 1 Press fft 2 Select Scenea then press OK The default or pre loaded picture is displayed Note If the sleep timer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your TV gt Use timers and locks gt Sleeptimer Page 29 Set a picture as Scenea Note The file size of the picture must not be more than 1 MB 1 Connect the USB storage device to the TV 2 Press fft 3 Select Browse USB then press OK 4 Select a picture then press amp 5 Select Set as Scenea then press OK 6 Select Yes then press OK 7 Press any key to exit Scenea Universal access Enable universal access Where supported by your digital TV broadcaster this TV allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must tum on universal access in the Preferences menu 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Universal access gt On then press OK Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired To switch on hearing impaired audio and subtitles if available 1 While watching TV press Bf 2 Press the red
76. requency is entered select Done then press OK 4 Select Store current channel to store the fine tuned channel as the current channel number or select Store as new channel to store it as a new channel number EN 37 English Install digital channels You can reposition your antenna to improve the reception You need to know the correct frequency to tune For best results contact the service provider or get a professional installer Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Digital Reception test gt Search then press OK 3 Press the Numeric buttons to enter the channel frequency 4 Select Search then press OK 5 When the correct channel is located select Store then press OK 6 Press D to exit Notes e If the reception is poor reposition your antenna and repeat the procedure f you receive the channel with DVB C he options Symbol rate mode and Symbol rate are available n Symbol rate mode select Automatic unless your cable provider supplies you with a specific symbol rate value Fine tune analogue channels If the reception of an analogue TV channel is poor try fine tuning the TV channel Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation 7
77. room for the best Ambilight effect Caution To avoid bad infrared remote control reception place your devices out of sight of Ambilight 1 Press IEU Experience 2 Select Ambilight then press OK 3 To switch Ambilight on or off select On or Off You can also press on the TV to switch Ambilight on or off Set up Ambilight In the Ambilight menu you can access more Ambilight settings While watching TV press ff gt Setup gt TV settings gt Ambilight Select a setting to adjust e Dynamic Adjusts Ambilight between relaxed and dynamic levels Available only if Ambilight Colour is set to Dynamic EN 21 English e Brightness Adjusts the brightness of Ambilight e Colour Selects a predefined colour e _ Custom colour Set your own Ambilight colour To access this option set Ambilight gt Colour gt Custom e Separation Adjusts the difference in colour levels between each side of the TV Turn off this feature for a dynamic and uniform Ambilight colour e TV switch off Selects how Ambilight switches off when the TV is switched off e Lounge light mood Selects a lounge light mode This setting is applied when lounge light is enabled in standby mode e Scenea lounge light Switch on or off Scenea lounge light when Scenea is enabled e Wall colour Selects a colour to match the wall colour Ambilight will correct its colours to mix best with
78. s on screen you can operate the connected audio or video player Select a key and press OK to carry out its function Press D Back to hide these on screen keys Reload page f something went wrong during the loading of a page you can try to reload it Press B Options and select Reload page Zoom page To zoom in and out on an Internet page press B Options and select Zoom page Use the slider bar to set the enlargement To scroll through an Internet page use the Navigation buttons to jump from highlight to highlight Security info To view a page s security information press Options and select Security info Clear Net TV memory Warning this option resets Net TV completely To clear the Net TV memory completely including your favourites the parental control code passwords cookies and history press B Options and select Clear Net TV memory Net TV services for another country Services may differ for each country To switch to the services of another country select Country at the bottom right of the page and press OK Select a country and press OK Koninklijke Philips Electronics N V bears no responsibility regarding the content and the quality of the content provided by the content service providers Internet websites With Net TV you can link up to the Internet You can view any website you like but remember that most Internet websites are not meant to be viewed
79. sharing open the Settings window When the device icon the TV is checked with a green tick click OK Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library In the Add to Library window select My folders and those of others that can access and click the Advanced Options button jy eme Setters teat prey sre tr meter tar nd Stet Tor Dom My ore on gm rm on Mem terre M ra aen ven My pons Toss A As boen med Pharm d ohms Pl Lone mom semen mm on me With Advanced Options open you can add specific folders to the list to share and click Add Add To Libvary Kel Select ioien Pa you wart 35 monto tor mda thes The Payer boray or tus computer u ted maand ts ated Pages Smet ae bne eet ow My gea Leno dM ttre ard eee of anm Pat ar men Vormm 1o Tyee Lent A NGA Mun gevende ittm mem Remy eA en Adis sume rcl alum tor al in ios Ate les VX E Wer Mes S t inira i om n the Add Folder window select a folder with music photos or videos that you want o share with other devices and click OK n the Add To Library window the newly added folder is shown You can add more folders to share Click the OK button to add he files to the library Maris e om mh ke You can now enjoy music photos and videos on your TV Change other settings Energy efficient settings 1 While watching TV press the green button 2 Select one of
80. speed Sets the display time for each picture in the slideshow e Slideshow transition Sets the ransition from one picture to the next e Set as Scenea Sets the selected picture as wallpaper on the TV Listen to music Press the Navigation buttons to select a music track then press OK e Press to fast rewind or fast forward a track e Press 2 to exit content browser Press B to access or exit the following settings e Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK e Press or to rewind or fast forward a file e Press D to exit the content browser During video playback press B to access the following settings e Stop Stops playback e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos EN 32 Listen to digital radio If digital broadcasting is available digital radio channels are installed automatically during installation 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Select list gt Radio then press OK 5 Select a radio channel then press OK Use Scenea Activate Scenea You can use Scenea to display a picture as wallpa
81. sponsibility for improper wall mounting that result in accident injury or damage e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the mounting surface ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating ever install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover he ventilation slots on the TV Risk of injury fire or power cord damage ever place the TV or any objects on he power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all imes EN 10 e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the socket and aerial before lightning storms During lightning storms
82. t Use your TV gt Remote control gt Overview Page 15 Alternatively find the answer in Search for Press a to select the next TV tour The TV menus PHILIPS Let s learn more about these frequently used menus e the Home menu ft e the Browse menu LL e the Options menu 2 e the Experience menu ON PHILIPS In the Home menu fft you can select the source to watch such as a TV channel or movies from a connected DVD player or USB flash drive You can also add a new device or access the Setup menu for more settings PHILIPS In the Browse Menu W you can access Teletext the channel list or the Electronic Programme Guide EPG EPG is not available in all countries PHILIPS In the Options menu E you can select setti For ings related to what is shown on screen example while you are watching a channel you can mark it as a favourite PHILIPS In the Experience menulllil you can quickly adj You u st Ambilight picture and sound settings can select the ideal picture setting for movies games or music Or you can change the You for picture format of the on screen image can even change the surround settings he TV speakers Available on certain models only You can also find the answer in Search for Press a to select the next TV tour EN 7 English Connect devices Connect DVD players Blu ray Disc players or game consoles through
83. tart page you can switch on parental control If you switch on parental control you need to enter a personal lock unlock code Enter a 4 digit code as your Net TV lock unlock code Use the Numeric buttons on the remote control Enter the same code again to confirm Net TV is ready for use Browse Net TV Access the Net TV home page Press fft 2 Select Browse Net TV then press OK The TV links up to Net TV and opens the start page To exit Net TV pressfftand select another activity The Start page The Start page shows your favourite services and some recommended services You can browse Net TV from this page To return to the Start page press HA Browse EN 23 English Open a Net TV service Select a Net TV service with the Navigation buttons To open a selected service press OK A closing lock animation means that the page you have opened is a secure page Navigate a Net TV service avigating within a Net TV service can differ from one service to another You can use he Navigation buttons and the OK button o browse the service Some services indicate how to browse their services To go back to the previous page press D Back All services To view the available services for your country select Services and press OK On this page you can view all services or view them by category e g News or Entertainment To view the services by category select a category in the c
84. the following settings then press OK e Energy saving Applies a combination of picture settings to reduce energy consumption Mute screen Turns off the TV display Muting the screen saves energy if you just want to listen to audio from he TV e Light sensor To save energy he built in ambient light sensor lowers he brightness of the TV screen when he surrounding light darkens Audio lip sync Turn on digital audio lipsync to automatically sync the image on your TV to audio from a connected Home Theatre System 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Audio Out delay gt On then press OK EN 43 English TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press amp 2 Select Status then press OK The clock is displayed on the bottom right hand corner of the TV screen Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Clock gt Auto clock mode 3 Select Automa
85. tic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled for your time zone Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection then select Done TV location A range of TV settings are applied to suit the location of the TV EN 44 Shop or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all TV settings 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Location gt Home or Shop then press OK 3 Restart the TV Stand mount or wall mount Specific TV settings are applied to suit the mounting location of the TV 1 In the Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update software TV software 1 Press fft 2 Select Setup gt Software settings gt Current software info then press OK The version of the current software is displayed To update t
86. udio and video input from analogue or digital devices such as DVD players or game consoles 2 DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems 3 HDMI Digital audio and video input from high definition digital devices such as Blu ray players 4 HDMI ARC In addition to normal HDMI functionality outputs TV audio to an HDMI ARC compliant device such as a home theatre system 5 AUDIO IN Audio input from a computer EN 49 English 6 ANTENNA Signal input from an antenna cable or satellite 7 VGA Video input from a computer Side 2 USB Data input from USB storage devices 3 Cl Common Interface Slot for a Conditional Access Module CAM 1 HDMI Digital audio and video input from 4 SD CARD Slot for an SD memory card high definition digital devices such as Blu ray players Connect devices Blu ray disc player Use an HDMI cable to connect the Blu ray disc player to an HDMI connector on the bottom of the TV Sg Blu ray Disc Player B CSO HDMI EN 50 DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the bottom of the TV b Vn m E C 3oeeoeococ HDMI DVD Recorder First use two antenna cables to connect the antenna to the DVD recorder and the TV mmo Keo 52 t j M iu Finally use a SCART cable to connect the DVD Recorder to a SCART connector on the bottom of the TV
87. ume mute 20 W websites 23 widgets 26 widgets add remove 26 EN 73 English 2009 Koninklijke Philips Electronics N V All rights reserved Document order number 313913703594
88. upport can delay the time taken for a TV to display content from a HDMI device e If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased This behaviour is normal when an HDMI CEC audio device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the TV e Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV causing poor playback Network connection issues Applica
89. vices on their digital TV channels for example BBC1 When in digital teletext e Press the Navigation buttons to select or highlight items e Use the Colour buttons to select an option then press OK to confirm or activate Note Digital text services are blocked when subtitles are broadcast and Subtitles are enabled Read Use more of your TV gt Use subtitles Page 30 Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default To switch Teletext 2 5 on or off 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Text 2 5 gt On or Off then press OK Favourite channels Add or remove channels 1 Press W 2 Select Channel list then press OK 3 Press B 4 Select Mark as favourite or Unmark as favourite then press OK A star appears in the channel grid indicating that the channel is added to the favourite list The star disappears if you remove the channel from the favourite list Select a favourite list View only channels in a favourite list or view all channels if a favourite list is currently selected 1 In the channel list press amp 2 Select Select list gt Favourites to display channels in a favourite list or All to display all channels 3 Press OK to confirm your choice Use EPG Overview The Electronic Programme Guide
90. w 68 Power and reception 68 Display and sound 68 Display resolutions 68 ultimedia 68 Connectivity 69 Dimensions 69 Index 71 EN 3 English 1 Get started TV Tour The remote control PHILIPS To switch TV channels EN 4 PHILIPS To open or close the Home menu ff In the Home menu you can access connected devices picture and sound settings and other useful features PHILIPS To open or close the Browse menu LL In the Browse menu you can access Teletext the channel list or the Electronic Programme Guide EPG EPG is not available in all countries PHILIPS To open or close the Options menu Bf Options menus offer convenient settings related to what is on screen PHILIPS To open or close the Experience menu IH In the Experience menu you can access a range of frequently used settings PHILIPS Back D To return to the previous TV channel or menu Press and hold to return to watching TV PHILIPS Red To select the red option access digital Interactive TV services or watch TV demonstration clips Available on certain models only EN 5 English PHILIPS Green To select the green option or the energy efficient settings PHILIPS Yellow To select the yellow option EN 6 PHILIPS Blue To select the blue option or to open the Widgets Available on certain models only Read more about the remote control in Help g
91. wing picture formats can be selected e Auto fill Adjusts the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarges the picture to fill he screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Removes the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scales the classic 4 3 format to 16 9 Not recommended for HD or PC e Wide screen Stretches the classic 4 3 format to 16 9 e Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Notes e Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Add new device Notes e _ Before watching a connected device you must add it to the home menu e HDMIARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu 1 Connect and switch on the device 2 Press fft 3 Select Add your devices then press OK Follow the on screen instructions Watch connected device 1 Press fft 2 Select the device from the home menu 3 Press OK to confirm your choice Use Ambilight Switch on Ambilight Enjoy a more relaxed viewing experience and improved perceived picture quality Dim the lighting conditions in the

Philips 32PFL7605H 32" Full HD

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 32PFL7605H 32&quot; Full HD

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 32PFL7605H 32" Full HD