Home

Alpine NVE-M300P

1. Set Date Time Format You can set the date and time format Various international formats are available Time and Time Zone Settings You can access time and time zone settings Alpine Navigation Software helps you with correcting the device time to the ever accurate GPS time Alpine Navigation Software can also help you set the time zone based on your current GPS position Time and Time Zone Settings Button Description 2 Auto Time Correction to GPS Use this feature to synchronise the clock of your device to the highly accurate time provided by the GPS receiver PSEA MNE AONE Use this feature to synchronise the time zone of the clock of your device to the time zone based on your current GPS position This is useful if you travel abroad Set Time Zone Set time zone manually if you do not want to synchronise the time zone automatically This allows you to use Auto Time Correction and apply a time zone offset to obtain the desired time Compare GPS and device The current time of the GPS receiver and the device clock are times displayed Please note that the GPS clock is only available with GPS reception This allows you to check whether any correction is needed 8 5 5 Adjust Display You can fine tune device related settings in this menu we Display Adjustment Tap the following Wi Display Adjustment 63 NVE M300P Navigation Module Owner s Manual Description Display Adjustment You can fi
2. E T 55 SLL Manip e RR TOM ES ETT ETT E E E TET a 56 AP a iona rS a ieS ARa 56 Sho Manage Saved ROUTE Susenas iai OE EET E KEEA 257 SN INI ae Trick LOD ROT 58 VISITES 56 10 NVE M300P Navigation Module Owner s Manual 53i Map sree i SUNOS PARAR e e PE ON ID UM MM E Ti 59 5 5 2 S E AAA PP e eo E od GSC dS Ue don ad 6D d UAI MPa OEC 60 5 5 9 Route Planning Opositores ceca 61 So INS OOM AGG DINO TET OO OO pb 63 NE A c o oO 63 8 30 INT AUTOM Se BUI OG PRA o 6 o A 64 5 5 7 A VEU ED CA AMA A eo o EU O E FE OR PO POE a dUT RR arsi 64 A PA e A Fi O 65 mors M MU CPI AO o OO a o POC O 65 e EOM he Ao TT T Umm 66 5 3 L1 User Data Manage Mena o o EE 67 PEE T V T E AO TO mihe DO zas PO LOTA E SOON CC 70 IO OP O ACES O tia 70 I1 SBECIHCOUOIS no TE 11 NVE M300P Navigation Module Owner s Manual 6 Getting started with Alpine Navigation Software Alpine Navigation Software is optimised for in car use You can use it easily by tapping the screen buttons and the map with your fingertips Alpine Navigation Software can plan routes throughout the whole installed map set you do not need to change maps or switch to a poorly detailed general map to navigate between map segments or countries Tasks Double tapping the You do not need to tap the screen twice for any action With buttons and screen controls a single tap is enough Tapping and holdin
3. e After entering a couple of characters the names that match the string appear in a list e Tap OK to open the list of results before it appears automatically 3 Select the street from the list 5 Enter the house number 1 Enter the house number on the keyboard 2 Tap OK to finish entering the address 6 The map appears with the selected point in the middle Tap NNI The route is then automatically calculated and you can start navigating 7 1 2 2 Entering an address if house numbering is restarted There are long roads where house numbering is restarted at some point This way the same house number can appear twice or even more times on the same road If this is the case after entering the house number you need to select the appropriate address by the district suburb information ES P Destination IE Address 1 Tap the following buttons l l 2 By default Alpine Navigation Software proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed the lt City Name gt country state tap Start entering the settlement name on the keyboard Get to the list of search results e After entering a coupl
4. If GPS Y is available and you have moved the map the button appears Tap this button to return to the GPS position Changes how much of the map is displayed on the Screen Alpine Navigation Software uses high quality vector maps that let you see the map at various zoom levels always with optimised content It always displays street names and other text with the same font size never upside down and you only see the streets and objects that you need Map scaling has different limits in 2D and in 3D map view modes Changes the vertical view angle of the map in 3D mode Changes the horizontal view angle of the map in 3D mode or in rotated 2D mode When GPS position is available Alpine Navigation ooftware always rotates the map so its top faces your direction of travel Track Up orientation You can turn away from Track Up with these buttons Tilting up and down Y m Rotating left and right e perspective view 3D the top of the map always Viewing modes points in the current driving direction Multi function A Show Start position Return to GPS position Repeat button voice instruction See page 15 for details Map scale LINE Alpine Navigation Software shows the scale of the map in 2D mode If GPS Y is available and you have rotated the map tap to re enable the automatic map rotation Gives you the following map perspect
5. a life like replay begins 4 You can stop the replay any time by tapping the O button Changing the colour of a Track Log a 1 Tap the following on A NN 9 2 Tap the desired Track Log and then tap one of the colour buttons 7 9 Saving the active route ome ELLEN sc EEEERN 1 Tap the following buttons 2 Enter a name for the saved route and then tap OK When you save a route Alpine Navigation Software not only saves the route points but the whole itinerary e The saved route might have been influenced by TMC information When you later use the route it appears as it was saved But if it needs to be recalculated the current TMC information will be used in the new route e f you updated your map since you first saved the route Alpine Navigation Software recognises the change and recalculates the driving instructions according to the latest available map information e f you want to save the route you need to save it before you start navigating During navigation Alpine Navigation Software deletes any waypoints that you already left behind together with the road segments used to reach it 40 NVE M300P Navigation Module Owner s Manual 7 10 Loading a saved route ES H Route v Load Route 1 Tap the following buttons EE 2 Tap the route you wish to navigate In the very likely case when the start position of the saved route is different from the current GPS position you need
6. 26 NVE M300P Navigation Module Owner s Manual 6 3 11 Speed limit warning Maps sometimes contain information about the speed limits of the road segments This information may not be available for your region ask your local dealer or may not be fully correct for all roads on the map You can configure Alpine Navigation Software to warn you if you exceed the current limit worn When Spec the following buttons When you exceed the speed limit the lowing happens e Visible Warning A symbol with the speed limit appears in the corner of the map for example Eo e Audible Warning A voice message Is played using the selected voice guidance profile 6 3 12 TMC Traffic Message Channel Alpine Navigation Software can provide you with even better routes if Traffic Message Channel TMC information is available TMC is a specific application of the FM Radio Data System RDS used for broadcasting real time traffic and weather information TMC is enabled by default in Alpine Navigation Software E Note TMC is not a global service It may not be available in your country or region Ask your local dealer for coverage details NVE M300P Navigation Module is sold with a TMC module which is needed to receive TMC data To receive the signal you also need a TMC antenna several models can be purchased as accessory ask your local dealer for further information If public TMC data are broadcasted at your location Alpine
7. EVEN y EON Mode Tap the following buttons VE wv Button Descipin Warn When Speeding Maps may contain information about the speed limits of the road segments Alpine Navigation Software is able to warn you if you exceed the current limit This information may not be available for your region ask your local dealer or may not be fully correct for all roads in the map This setting lets you decide whether you wish to receive the warnings You can set the relative speeding level at which the application warns you 10096 represents the current speed limit e n Built up Areas in cities and towns e Elsewhere at all other locations 64 NVE M300P Navigation Module Owner s Manual Button Description 2 There are two types of warnings You can turn them on or off independently e Audible Warning A voice message is played using the selected voice guidance profile e Visible Warning A symbol with the speed limit appears in the corner of the map for example Eo This feature allows you to receive a warning when approaching a Road Safety Camera You must ensure on your own liability that using this feature is legal in the country where you intend to use it You have the following options Speed Camera Warning e Audible Warning beeps can be played while you are approaching the camera or just alert sounds if you exceed the speed limit while approaching one of these cameras Visible War
8. Favourite to be your destination ES P Destination Favourites 1 Tap the following buttons l 2 Tap the Favourite that you want to set as your destination 3 The map appears with the selected point in the middle Tap NN The route is then automatically calculated and you can start navigating 7 1 5 Selecting the destination from the POIs You can select your destination from the POIs included with Alpine Navigation Software or from the ones you have previously created 1 Tap the following NN estinatio J roi 2 Select the area around which the POI should be searched for Near Address The POI will be searched for around a given address iti The POI will be searched for around the current GPS position Near Destination e The POI will be searched for around the destination of the active route 35 NVE M300P Navigation Module Owner s Manual On Route The POI will be searched for not around a given point but by the size of the detour it adds to the active route This can be useful if you search for a later stopover that causes only a minimal detour for example upcoming petrol stations or restaurants 3 You can narrow the search with the following e Select the POI group e g Accommodation and after that if needed select the POI subgroup e g Hotel or Motel e To find the POI by its name tap E and use the keyboard to enter a part of the name LOGRA WA gt
9. Information screen has both route and travel data you might need during your journey It can MT be opened directly from the Map screen by tapping the Trip Data field UMM Distance Remaining p GPS Time 965 km p gt 11 54 Time Remaining Altitude 8 48 210 m Arrival Time Speed Limit 20 43 100 km h L J Trip Computer Set Info A The fields on this screen are continuously updated while you keep the screen open All route data fields contain information about reaching your final destination If you want to change the content of the three data fields on the Map screen tap EJ You have the following data and functions on this screen 50 NVE M300P Navigation Module Owner s Manual Name Description Shows whether the route data fields show information about the final destination checkered flag or about the next waypoint yellow flag Distance Remaining Shows the distance you need to travel on the route before reaching your final destination Time Remaining Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays Arrival Time Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other p
10. Navigation Software automatically takes into account the TMC data received You do not need to set anything in the program The receiver will automatically search the FM radio stations for TMC data and the decoded information will immediately be used in route planning The moment Alpine Navigation Software receives traffic information that may affect your route the program will warn you that it is recalculating the route and navigation will continue with a new route that is optimal considering the most up to date traffic conditions You can access the list of TMC events change TMC related settings and select or ignore specific Traffic radio stations in the list of TMC events On the Map screen tap 27 NVE M300P Navigation Module Owner s Manual 7 Navigating with Alpine Navigation Software You can set up your route in Alpine Navigation Software in several ways e if you need a simple route a route with only one destination without any intermediate waypoints you can select the destination and start navigating to it right away e you can plan a multi point route e you can also plan a route independently of your current GPS position or even without GPS reception 7 1 Selecting the destination of a route Alpine Navigation Software offers you several ways of choosing your destination and waypoints intermediate destinations e Use the selected location on the map the Cursor page 28 e Enter a full address or a part of
11. Speed limit on the current road Time information There are time values that can be shown Local time Time remaining to reach the destination Time remaining to reach the next waypoint Estimated arrival time at the destination Estimated arrival time at the next waypoint Distance information There are distance type values that can be shown e Distance remaining to reach the destination e Distance remaining to reach the next waypoint Current altitude The area in the bottom left corner is a combined status indicator field Tap this area to open the GPS Data screen page 53 GPS position quality A higher number of lit bars indicates better GPS position accuracy Track log recording Alpine Navigation Software records a Track log when GPS position is available 19 NVE M300P Navigation Module Owner s Manual 6 2 4 Using the Cursor the selected map location First place the Cursor at the desired map location with one of the following options e Use the Destination menu to select a location The map returns with the selected point the Cursor in the middle and the Cursor menu appears with the available options e Tap the screen and tap again to place the Cursor at the desired location Now tap to open the Cursor menu You can perform the following actions Button Creates a new route with the Cursor as the destination The previous route if exists is deleted Opens the full screen Cursor menu with al
12. Street pass on right Great George Street F NENNEN E o To display the Turn List tap the following buttons l l l You have the following options on the Itinerary screen Button Description Any of the list items Opens the map with the selected manoeuvre in the middle Changes the detail level of the Itinerary The levels are as follows Detailed Instructions all intersections are listed Turn List only significant intersections the ones announced in voice guidance are listed Road List the list of the roads used while navigating the route When the map is open with a manoeuvre in the middle Zooms in the map Zooms out the map Moves the map to show the previous or next manoeuvre EN Opens a screen where you can avoid a part of the route starting from the selected manoeuvre 24 NVE M300P Navigation Module Owner s Manual 6 3 7 Track Logs Alpine Navigation Software can log the track that you drive page 39 A Track Log is a recording of how your GPS position changed and it is independent of the route Alpine Navigation Software calculated Track Logs can be recorded renamed replayed shown on the map exported to a USB stick in GPX format and deleted See page 58 Independently of the normal track log you can instruct Alpine Navigation Software to record the native GPS data received from the GPS device These logs are saved as separate text files on USB stick and they cannot be shown or replayed
13. an address for example a street name without a house number or the names of two intersecting streets page 29 e Enter an address with postal code page 34 This way you do not need to select the name of the settlement and the search for street names might be faster as well e Use a coordinate page 37 e Use a saved location e aFavourite page 35 e a POl page 35 e the History of previously set destinations and waypoints page 36 If you are going to use a route later save it before you start navigating Tap the no puton Il LAKAS 7 1 1 Selecting the Cursor as the destination 1 Locate your destination on the map move and scale the map as needed page 16 2 Tap the location that you want to select as your destination The Cursor appears 3 Tap EN to open the Cursor menu 4 The map appears with the selected point in the middle Tap Go The route is then automatically calculated and you can start navigating ou know that you will use a destination later instead of tapping tap The Cursor menu appears save the selected location as a POI or put it on the list of your Favourites first The map returns 28 NVE M300P Navigation Module Owner s Manual automatically with the same point Now you can use it as a route point 7 1 2 Entering an address or part of an address If you know at least a part of the address it is the quickest way to select the destination of the route Using the same screen y
14. and then tapping 7 7 Deleting the active route The easiest way to delete the active route is to open the Route Information screen by tapping the Turn Preview field M on the Map screen and then tapping ES H Route ou can do it through the Navigation menu Alternatively Delete Route El Note If waypoints exist in the active route you cannot delete the route immediately on the Remove Next Waypoint Route Information screen Tap repeatedly until all I Route aypoints disappear and the button appears Tap it to cancel the hole route 7 8 Using Track Logs Alpine Navigation Software can record the track how your GPS position changed that you drive You do not need to select a destination and create a route for this you can also record your driving path while cruising Recording the travelled path creating a Track Log 1 Start driving ES 4 Edit Track Logs 2 Tap the following buttons l l Record 3 Start the recording tap the button 39 NVE M300P Navigation Module Owner s Manual You return to the map and you can continue driving Stop 4 Repeat the above steps then tap later to stop the recording Alpine Navigation Software labels the Track Log with a time stamp Simulating a Track Log on the map Ez 1 Tap the following A ect 9 2 Locate the desired Track Log and then tap the a button next to it 3 The map returns and the Track Log simulation
15. buttons l l Button Description 3D Settings waminos J You can enable and fine tune some useful warnings page 64 You can control how Alpine Navigation Software behaves P 9 ds during navigation cs J You can open the GPS Data screen page 65 Use 3D settings to determine which of the present 3D objects are shown on the map and adjust the level of 3D visual detail The options are as follows e Landmarks Landmarks are 3D artistic or block representations of prominent or well known objects 3D landmarks are only available in selected cities and countries Elevated Roads Complex intersections and vertically isolated roads such as overpasses or underground tunnels are displayed in 3D 99 NVE M300P Navigation Module Owner s Manual 3D Auto Zoom Turn on or off the Auto Zoom feature in 3D map view mode Colour Profiles Alpine Navigation Software is able to show the map and the menus in different colours during the day and during the night Select the colour profiles to be used in each mode and select the automatic or manual switching between the daytime and night colour profiles Elevation on 2D Map 2D maps can also display 3D information These top down maps can display elevation by colours and shading Street Names During Street names and POI icons can be disturbing on the map during Navigation navigation With this switch you can suppress these map elements when Alpine Navigation Software is following you
16. carefully check all electrical connections for short circuiting Also have your vehicle s voltage regulator checked Servicing the Unit If you have problems do not attempt to repair the unit yourself Return it to your ALPINE dealer or the nearest ALPINE Service Station for servicing Installation Location Make sure the NVE M300P Navigation Module will not be exposed to e Direct sun and heat e High humidity e Excessive dust e Excessive vibrations NVE M300P Navigation Module Owner s Manual 3 End User Licence Agreement 1 The contracting parties 1 1 This Agreement has been entered into by and between Nav N Go Kft registered seat 23 B rc utca H 1016 Budapest Hungary Company reg no 01 09 891838 as Licensor hereinafter Licensor and You as the User hereinafter User the User and the Licensor jointly referred to as Parties in subject of the use of the software product specified in this Agreement 2 Conclusion of the Agreement 2 1 The Parties hereby acknowledge that this Agreement shall be concluded by implicit conduct of the Parties without signing the Agreement 2 2 The User hereby acknowledges that following the lawful acquisition of the software product constituting the object of this Agreement Section 4 any degree of use installation into a computer or other hardware installation of such hardware into a vehicle pressing of the Accept button displayed by the software during installation or use hereina
17. for editing My POI Tap to filter the list to contain only the POIs that you saved Tap to see all POIs in the list Moves between pages for additional list items 56 NVE M300P Navigation Module Owner s Manual When a POI group is open for editing Button Description ____________ Off Items in the POI group will not be shown on the map The distance buttons set the zoom level from which the items in the Edit Medium POI group will be shown on the map Subgroups under the edited POI group will inherit the visibility Same Visibility in Subgroups settings of the POI group Button with the icon of the POI Tap this button to select a new icon for the POI group Rename Tap this button to rename the POI group R Deletes the edited POI group You are only allowed to remove POI move groups that you have created When a POI item is open for editing Button with the name Tap this button to rename the POI of the POI Button with the icon of the POI Tap this button to select a new icon for the POI Button with the address Tap this button to modify the location of the POI Select a new location on the map and tap to relocate the POI Phone Number Tap this button to enter a telephone number for the POI Additional Info Tap this button to enter additional information for the POI Tap thi lete the sel POI Delete ap this button to delete the selected PO Change Tap this button to move the POI to another POI g
18. in Alpine Navigation Software ES 7 Settings To turn on NMEA SIRF log saving tap the following buttons l Track Logs Create NMEA SIRF Log 6 3 8 Route demonstration A simulation drives you through the route following the driving instructions page 38 You can use it for example to see which bridge Alpine Navigation Software planned for the route if you do not want to take that bridge you can avoid it MN Il LC v E Tap the following buttons l 6 3 9 POI Points of Interest A point of interest POI is a location that someone might find useful or interesting Alpine Navigation Software is delivered with thousands of POIs and you can also create your own POIs in the application POI locations are marked on the map with special icons POI icons are quite large so you can easily recognise the symbol The icons are semi transparent they do not cover the streets and intersections behind them POls are grouped into several levels of categories and subcategories The icon of a POI that comes with the map shows the symbol of the POI category If you save your own POI you can select an icon for it independently of the POI category you have put it in 25 NVE M300P Navigation Module Owner s Manual Saving POIs To save a POI place the Cursor N at the desired location then tap the following buttons Select Options Save as POI Managing POIs You can select which POI groups to show and whi
19. its distance from the current GPS position is displayed Most of these icons are very intuitive and you also know them as road signs The following table lists some of the frequently shown route events don Description A Keep left A Continue straight in the intersection e Enter roundabout The number of the exit is shown in the circle but only S for the next turn Approaching the next waypoint Approaching the destination at 45 NVE M300P Navigation Module Owner s Manual 8 1 2 Objects on the map 8 1 2 1 Streets and roads Alpine Navigation Software shows the streets in a way that is similar to how the paper road maps show them Their width and colours correspond to their importance you can easily differentiate a motorway from a small street If you prefer not to see street names during navigation turn them off page 59 8 1 2 2 3D object types Alpine Navigation Software supports the following 3D object types 3D landmarks Landmarks are 3D artistic or block representations of prominent or well known objects 3D landmarks are only available in selected cities and countries Elevation model Hills and mountains are shown in the background of the 3D map view and illustrated by colour on the 2D map Elevated roads Complex intersections and vertically isolated roads Such as overpasses or bridges are displayed in 3D 3D buildings Full 3D city building data that represents ac
20. recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed the lt City Name gt country state tap Start entering the settlement name on the keyboard Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap NN to open the list of results before it appears automatically 4 Select the settlement from the list 4 Enter the street name 1 Start entering the street name on the keyboard 2 Getto the list of results e After entering a couple of characters the names that match the string appear in a list 31 NVE M300P Navigation Module Owner s Manual e Tap NN to open the list of results before it appears automatically Search in All 3 Instead of selecting one of the streets tap l 5 Enter the house number 1 Enter the house number on the keyboard 2 Tap oK to finish entering the address 6 A list appears with the matching addresses Tap the desired one 7 The map appears with the selected point in the middle Tap NN The route is then automatically calculated and you can start navigating 7 1 2 4 Selecting an intersection as the destination ES 8 Destination IIS Address 1 Tap the following buttons 2 By default Alpine Navigation Software proposes the country state and settlement where you are If needed tap the button with the name of
21. rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved All rights reserved NVE M300P Navigation Module Owner s Manual 5 Table of contents I important Informa UTOR o ei ecesecsenvesscecsscvecesusecseesssawecseanessecessevssseasssssessseuscteavessaceseers 2 a PA EE A 3 do O n 3 A EAE NT ORN E TEE E OAA EEE 4 3 End User Licence Are Mentir aaa 5 ACOP PINE BOLO ooo dodo HE E E E ias 8 gt gt Lable OLCUDE S ess 9 6 Getting started with Alpine Navigation Software cccccscsssssscsssscccccccccssssees 12 6 1 Buttons and other controls ON the screen cccccccc
22. roads where there is a per use charge in the routes If you disable toll roads Alpine Navigation Software plans the best toll free route Period Charge Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time They can be enabled or disabled separately from toll roads Permit needed You might need a permit or permission from the owners to use certain roads or to enter certain areas Alpine Navigation Software excludes these roads from the route calculation by default Ferries Alpine Navigation Software includes ferries in a planned route by default However a map does not necessarily contain information about the accessibility of temporary ferries You might also need to pay a fare on ferries Cross border planning i some cases the route calculated according to your other navigation and route preferences would lead through another country If you wish to always stay within the same country turn this option off Route Calculation Method types Option __ Description Fast Gives the quickest possible route if you can travel at or near the speed limit on all roads Usually the best selection for fast and normal cars Short Gives a route that has the smallest total distance of all possible routes between the route points Usually practical for slow vehicles Economical Combines the benefits of Fast and Short Alpine Navigation Software calculates as if it were calculating
23. start point of the route when routing from a given location or the first waypoint to reach when routing from the GPS position The selected point moves down in the list becomes a waypoint to be reached later Tap this button repeatedly and the point becomes the final destination of the route Tap this button to optimise the route The start point and the destination remain at their position but the waypoints are reordered to make the shortest possible route As soon as you leave this screen the route is recalculated automatically and you can start navigating right away 7 4 Watching the simulation of the route ES H Route 1 Tap the following buttons v Simulate 2 The Route menu appears Tap Wo to run the simulation at normal speed and with voice guidance instructions announced 3 The simulation can be aborted any time by tapping m 7 5 Pausing the active route You do not need to pause the active route when you start driving again Alpine Navigation Software restarts the voice instructions from your position 38 NVE M300P Navigation Module Owner s Manual 7 6 Deleting the next waypoint from the route The easiest way to delete the upcoming route point S next waypoint is to open the Route Information screen by tapping the Turn Preview field Remove Next Waypoint uu ES H Route Alternatively you can do it through the Navigation menu l Route Info Remove Next Waypoint on the Map screen
24. why maps in Alpine Navigation Software look similar to paper road maps However Alpine Navigation Software provides much more than regular paper maps you can customise the look and the content of the map The most important and most often used screen of Alpine Navigation Software is the Map screen TASA Parliament Street During navigation the screen shows route information and trip data left screenshot but when you tap the map additional buttons and controls appear for a few seconds right screenshot Most parts of the screen behave as buttons 42 NVE M300P Navigation Module Owner s Manual Turn Preview Opens the Route Information the next route event screen Opens the GPS Data screen GPS position quality Top row Next street or Next settlement Additional buttons and controls appear for a few seconds B Current street and house Additional buttons and controls numbers on left and right appear for a few seconds ottom row de Map view modes Switches between 2D and 3D map modes e 2D North up e 2D rotated e 3D rotated Opens the controls of the Alpine head unit NVE M300P Navigation Module is connected to Opens the Navigation menu Cursor menu appears when Opens the Cursor menu the Cursor is not at the current GPS position Rotates the map left or right not available in 2D North up mode Tilts the 3D map scales the map This button has multiple functions page 15 Show
25. will be shown on the Route Information screen and the part of the route not matching your preference will be displayed in a different colour on the map Route Calculation Method You can choose from different route types The routing method can be changed temporarily while creating the route when the destination is Routing Methods f selected tap in the Cursor menu TMC Reroute Method This setting determines how Alpine Navigation Software uses the received TMC information in route recalculation e Auto When route recalculation becomes necessary based on the received TMC events Alpine Navigation Software recalculates the route automatically Manual When route recalculation becomes necessary based on the received TMC events Alpine Navigation Software notifies you but you can decide whether to recalculate the route or not Off TMC events are only taken into account when the route is recalculated in an off route situation Vehicle types e Car e Taxi e Bus e Emergency vehicles 61 NVE M300P Navigation Module Owner s Manual Road Types Used for Route Planning Motorways You might need to avoid motorways when you are driving a slow car or you are towing another vehicle Unpaved roads Alpine Navigation Software excludes unpaved roads by default unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them Per use Toll By default Alpine Navigation Software includes toll roads pay
26. 7 7 Navigating with Alpine Navigation Software sccccccsssssssssssssssssssssssssssssccceees 28 d Selecting the destination Of YOU iio 28 7 1 1 Selecting the Cursor as the destination seso AA Aia 28 7 1 2 Entering an address or part Of an addresSS oocccccncnncccccononononononnnnnnnnnnnnnnnnnnnononnnnnnnnnnnnnnnnnnnnnnnnnnnnnanos 29 Fl TS EE O OS RORPOD EEE COP MPRPDOET PEE EEEE eT CEPR ias 29 7 1 2 2 Entering an address if house numbering is restarted esses esee eene 30 7 1 2 3 Entering an address without knowing the district suburb esses eene 31 NVE M300P Navigation Module Owner s Manual 7 1 2 4 Selecting an intersection as the destination ooooooonnnnnnnnnnnnnnnnnnononnnanannnnnnnnnnnonnnnnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnas 32 7 1 2 5 Selecting a city centre as the destination uses esead aniaed ein tu eupeth vacaesedeianusuatioesdveasted tleausudeasaededascatoesdianasie 33 7 1 2 6 Entering an address with a postal code nas 34 7 1 2 7 Tips on entering addresses quickly nas 34 1 43 Selec ne the Home addE6eSS isidro bre VE PUN aaia 35 7 1 4 Selecting the destination from your Favourites sess 35 7 1 5 Selecting the destination from the POS aia A AA A a 35 7 1 6 Selecting the destination from the History cccccccccccncnononnnnoonnnnnnnnnnnnnnnnnonononononnnnnnnnnnnnnnnnnnnnnnnnnanos 36 7 1 7 Selecting the destination by entering its coordinates ooooooooon
27. NVE M300P Navigation Module Owner s Manual NVE M300P 1 7 77 ALPINE NVE M300P Navigation Module Owner s Manual 1 Important Information Please Read Carefully Before Using This Product This product is intended to safely provide turn by turn instruction to get you to a desired destination Please read the following precautions to ensure that you use your navigation system correctly e This product is not a substitute for your personal judgment Any route suggestions made by the navigation system may never supersede any local traffic regulations or your personal judgment and or knowledge of safe driving practices Do not follow route suggestions if the navigation system instructs you to perform an unsafe or illegal manoeuvre places you in an unsafe situation or routes you into an area which you consider unsafe e Glance at the monitor screen only when necessary and safe to do so If prolonged viewing of the screen is necessary stop the vehicle in a safe and legal manner and location e Do not input destinations change settings or access any functions requiring prolonged viewing of the monitor while you are driving Stop the vehicle in safe and legal manner and location before attempting to access the system e Do not use the navigation system to route you to emergency services Not all locations of emergency service providers such as police and fire stations hospitals and clinics are contained in the database Please use your o
28. Start position Return to GPS position Repeat voice instruction Current GPS position on nearest road Cursor selected map location 43 NVE M300P Navigation Module Owner s Manual Lane information Signpost information Staatsgrenze t t a a 8 1 1 Icons on the map There are several status icons on the map Most of them also function as a button The information they provide is as follows e GPS position quality e Track log recording status e TMC reception and processing status 8 1 1 1 GPS position quality and Track log indicator This area is a multiple status indicator and also acts as a button that opens the GPS Data screen A red dot a is displayed in this field if a Track log is being recorded 44 NVE M300P Navigation Module Owner s Manual GPS reception quality shows the current accuracy of the position information Alpine Navigation Software is connected to the GPS receiver but the signal is too weak and the receiver cannot determine the GPS position Only a few satellites are received Position information is available but elevation altitude cannot be calculated LEE BS Altitude information is available the position is a 3D position 8 1 1 2 Next route event Turn Preview field There is a field reserved on the Map screen to display the next manoeuvre route events that are listed in the Turn List Both the type of the event turn roundabout exiting motorway etc and
29. Track Log settings You can set up automatic Track j E and fine tune related settings Tap the following buttons El l v v mucin Button Description Update Interval This determines how often track points will be saved Position information is normally received once a second from the GPS If you do not need such a detailed log you can increase this number to save track log space Enable Auto saving When auto saving is enabled you do not need to turn track log saving on and off manually Alpine Navigation Software will automatically start recording the track log as soon as GPS position is available Track Logs Max Size You can set the maximum database size for the automatically saved track logs When the limit is reached the oldest automatically saved track logs will be deleted Create NMEA SIRF Log Independently of the normal track log you can instruct Alpine Navigation Software to record the native GPS data received from the GPS device These logs are saved as separate text files on an inserted USB stick and they cannot be shown or replayed in Alpine Navigation Software 66 NVE M300P Navigation Module Owner s Manual 8 5 11 User Data Management You can manage the data you have saved e g POls Favourites or History and the settings you User Data dis have made in the program Settings Tap the following buttons O y v Button Description Backup User Data 3 All
30. VE M300P Navigation Module TMC Module Power Vehicle Hanes Cable Velcro Fastener Flanged Self tapping Screw M4x14 13pin RGB Extension Cable USB Mini Cable External GPS Antenna GPS Waterproof Pad Cable Clamp for GPS Antenna Antenna Mounting Plate Installation Guide Booklet Quick Reference Guide Booklet Owner s Manual CD ROM 10 2 Optional Accessories 70 FM RDS Antenna KAE 500FM TMC Antenna 1x 1x 1x 2X 4x 1x 1x 1x 1x DX 1x 1x 1x NVE M300P Navigation Module Owner s Manual 11 Specifications Main Unit Size WxHxD 85mm x 25mm x 110mm 3 35 x 0 98 x 4 33 Main Unit Weight 265g 9 3502 CPU Atlas IIl Titan 600 MHz Sensor Built In Gyro and Built In Acceleration Sensor 12 channel 32 channel acquisition GPS Receiver RDS TMC Tuner TMC Module Internal Storage 2GB Built In flash memory with Pre Loaded Maps of Western and Eastern Europe USB Interface 2 0 Audio Fixed line level audio output Mono Display Resolution 400 x 234 pixels external analog RGB out Power Requirements 12V DC 10 16V allowable Fuse AGC 3AG 7 5Amp Operating Temperatur 10 to 50 C 14 to 122 F Storage Temperatur 25 to 70 C 13 to 158 F Note Due to continuous product improvement specifications are subject to change without notice 71 NVE M300P Navigation Module Owner s Manual AZLALPINE Mobile Media Solutions ALPINE ELECTRONICS MARKETING INC 1 1 8 Nishi Gotanda Shinagawa
31. and location before attempting operation e Make certain that the volume level of the monitor is set to a level which still allows you to hear outside traffic and emergency vehicles Driving while unable to hear outside sounds could cause an accident e Please make certain that any other person who intends on using the navigation system reads these precautions and the following instructions carefully e lfthere is anything in the manual which you do not understand or are uncertain about the operation of the navigation system please contact an authorised ALPINE representative before using the navigation system Correct Disposal of This Product The product purchased by you is provided in accordance with the European directive 2002 96 EC on WEEE Waste Electrical and Electronic Equipment A symbol of the crossed out dustbin has therefore been printed on the product This applies to all member states of the EC and indicates the fact that the product may not to be disposed of in the normal domestic waste The product must be disposed of in accordance with the local regulations at separate collection points Disposal in the normal domestic waste harms the environment Please contact the responsible waste management authorities or your local dealer where you purchased the product for further information NVE M300P Navigation Module Owner s Manual 2 Warnings Points to Observe for Safe Usage e Read the manuals for this device and the system
32. arbitrary point the map creators have chosen In towns and villages it is usually the most important intersection in larger cities it is an important intersection GPS accuracy Several factors have impact on the deviation between your real position and the one given by the GPS device For example signal delay in the ionosphere or reflecting objects near the GPS device have a different and varying impact on how accurately the GPS device can calculate your position Map Alpine Navigation Software works with digital maps which are not simply the computerised versions of traditional paper maps Similarly to the paper road maps the 2D mode of digital maps show you streets roads and elevation is also shown by colours In 3D mode you can see the altitude differences for example valleys and mountains elevated roads and in selected cities 3D landmarks and 3D buildings are also displayed You can use digital maps interactively you can zoom in and out increase or decrease the scale you can tilt them up and down and rotate them left and right In GPS supported navigation digital maps facilitate route planning North up map orientation In North up mode the map is rotated so its top always faces North This is the orientation in 2D North up view mode See also Track up map orientation 68 NVE M300P Navigation Module Owner s Manual Route A series of destinations to be reached one after the other A simple route contains one s
33. cally calculated and you can start navigating 7 1 2 5 Selecting a city centre as the destination The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen In towns and villages it is usually the most important intersection in larger cities it is an important intersection ES P Destination IS Address 1 Tap the following buttons l l 2 By default Alpine Navigation Software proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed the lt City Name gt country state tap Start entering the settlement name on the keyboard 3 Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap OK to open the list of results before it appears automatically 4 Select the settlement from the list 5 The map appears with the selected point in the middle Tap The route is then automatically calculated and you can start navigating 33 NVE M300P Navigation Module Owner s Manual 7 1 2 6 Entering an address with a postal code All of the above address searching possib
34. cccsescccccccavesccccceccessecccecauseecceesaueecceeeaueeceeeaages 14 MA XS IPIE ANE OE 15 6 1 2 Permanent buttons Menu Return Monitor Control and Map oooccccccnnnncncncnnnonononononnnnnnnnnononononos 15 SBAEBISITHIUTE IJ NE 16 62 1 Miami al eS Maeda tad cola 16 6 2 2 Lane intormation dnd SIPHDOSIS suscrita td 18 6 2 3 Status information and hidden controls on the map oooocconnnoonnnnnnnnnnnnnnnnnnnononononnnnnnnnnnnnnnnnononnnnos 18 6 2 4 Using the Cursor the selected map location ccccccccocoooooonnnnnnnnnononnnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnononnnnos 20 6 3 Alpine Navigation Software concepts eeeeeeeeeeeeeeeeeeeeee eene nnn nnn nnne eene s nnns nns 21 eN ZOO 0 AUN S on A en A E E T 21 03 2 POSION Mar KCI acestocscceasnanecestaeiaseateaieccdiacsaceadtanscadtacsaatadeauasediecaaccadtanecastacaactedeaansestonsaceaatantcesteciacc 21 GO d Curmeut GPS position and Lock On ROGU acutae dun acid 21 6 3 2 2 Returning to normal navigation a 21 A e LOS 2d RIETI EE 22 6 3 3 Daytime and night colour PIONS siones 22 6 Colour scheme monne S ollas 22 6 5 5 Route calculation and recalculation 22262291 ansa oo qud A bu DE ada DF aut ied qa ai NIE dass 23 0 30 Tur List nera ETE um 24 AN E API O AA 25 03 0 Route demonstratio esnean n tm 25 0 3 9 POL Points of IMErESt rotaci n 25 MAO Sa Bray Tie Aye Cameras an les 26 new Mes ca ID Narnia so aia 21 6 3 12 TMC Traffic Message Channel recintos 2
35. ch ones to hide on the map and from which zoom levels POI icons are visible At the same place you can manage your saved POls A saved POI can be renamed moved to a different POI group its icon can be changed or a phone number and additional information can be added to it Tap the following buttons a NN Personal POI 6 3 10 Road Safety Cameras The location of a Road Safety Camera is a special POI These cannot be searched like other POIs and there is a special proximity warning only for cameras Is NVE M300P Navigation Module shipped with a built in database of Road Safety Yes Cameras Can Road Safety Camera locations be uploaded in a text file Yes Can you save the Cursor as the location of a Road Safety Camera Camera warning The warning for Road Safety Cameras can be turned on in Warning Settings Tap the following buttons When you approach a Road Safety Camera with the warning enabled the following happens e Visible Nu The type and distance of the camera is displayed on the Map screen for example e Audible Warning If there is no speed limit specified for the camera or your speed is under the specified speed limit single beeps warn you about the camera e f you exceed the speed limit of the camera the following also happens e Visible Warning A symbol with the speed limit appears in the corner of the map for example so e Audible Warning A special alert sound is played
36. components carefully before using your navigation system They contain instructions on how to use the system in a safe and effective manner ALPINE cannot be held responsible for problems resulting from failure to observe the instructions in these manuals e This manual uses various pictorial displays to show you how to use this product safely and to alert you to potential dangers resulting from improper connections and operation The meanings of these pictorial displays are shown below It is important fully to understand the meanings of these pictorial displays in order to use this manual and the system properly Meaning of displays Warning Important instructions Failure to heed them may result in serious injury or death Caution Important instructions Failure to heed them may result in injury or material property damage 2 1 Warning DO NOT OPERATE ANY FUNCTION THAT DIVERTS YOUR ATTENTION FROM SAFELY DRIVING YOUR VEHICLE Any function that requires your prolonged attention should only be performed after coming to a complete stop Always stop the vehicle in a safe location before performing these functions Failure to do so may result in an accident DO NOT DISASSEMBLE OR ALTER Doing so may result in an accident fire or electric shock KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN Swallowing them may result in serious injury If swallowed consult a physician immediately USE THIS PRODUCT AS SPECIFIED Us
37. cording without the express written consent of Alpine Electronics Europe GmbH O 2009 Alpine Electronics Europe GmbH 2009 NAVTEQ All rights reserved Albania Andorra Austria Belarus Belgium Bulgaria Croatia Czech Republic Denmark Estonia Finland France FYROM Germany Gibraltar Greece Hungary ltaly Latvia Liechtenstein Lithuania Luxembourg Moldova Monaco Montenegro Norway Poland Portugal Ireland Romania San Marino Serbia Slovak Republic Slovenia Spain Sweden Switzerland The Netherlands Turkey Ukraine United Kingdom Vatican City All rights reserved 2005 NAVTEQ 1993 NAVTEQ 1996 NAVTEQ 2008 NAVTEQ 1995 NAVTEQ Bosnia and Herzegovina 2005 NAVTEQ 2005 NAVTEQ 2005 NAVTEQ 2002 NAVTEQ 1997 NAVTEQ 2005 NAVTEQ 2001 NAVTEQ 1993 NAVTEQ 2008 NAVTEQ 1993 NAVTEQ 2008 NAVTEQ 2003 NAVTEQ 2004 NAVTEQ 1994 NAVTEQ 2005 NAVTEQ 1996 NAVTEQ 2005 NAVTEQ 1996 NAVTEQ 2008 NAVTEQ 1993 NAVTEQ 2005 NAVTEQ 2001 NAVTEQ 2004 NAVTEQ 1997 NAVTEQ 1993 NAVTEQ 2005 NAVTEQ 1994 NAVTEQ 2005 NAVTEQ 2002 NAVTEQ 2004 NAVTEQ 1997 NAVTEQ 1994 NAVTEQ 1996 NAVTEQ 1993 NAVTEQ 2008 NAVTEQ 2008 NAVTEQ 1993 NAVTEQ 1994 NAVTEQ All rights reserved All rights reserved All rights reserved All
38. ct to be breached the Licensor may 9 1 1 seek judicial recognition of this breach 9 1 2 demand that the breach cease and order the person in breach to refrain from continuing such actions 9 1 3 demand that the person under breach give proper compensation even by way of publicity at the expense of the person in breach 9 1 4 claim the return of the increase of assets due to the breach 9 1 5 demand the cease of the wrongful action and demand restitution to its state before the breach was committed at the expense of the person in breach and may demand the destruction of instruments and materials used to commit the breach as well as of the products created by the breach 9 1 6 claim for damages 9 2 The Licensor hereby also informs the User that the breach of copyrights and related rights is a crime under Act IV of 1978 on the Hungarian Criminal Code which may be sentenced of two years in prison in basic cases and up to eight years in prison in aggravated cases 9 3 Contents and services provided by third parties The Licensor hereby excludes any liability of its own for the Database in the Software Product and for any content or service provided by a third party by using the Database The Licensor does not warrant the quality suitability accuracy fitness for a specific purpose or territorial coverage of the product or service or the availability of the service and it specifically excludes any liability for the suspension of the
39. e characters that appear in possible search results The other characters are greyed out e When entering the settlement name or the street name tap the OK button after a couple of letters Alpine Navigation Software lists the items that contain the specified letters e You can speed up finding an intersection e Search first for the street with a less common or less usual name fewer letters are enough to find it E If one of the streets is shorter search for that one first You can then find the second one faster 34 NVE M300P Navigation Module Owner s Manual e You can search for both the type and the name of a road If the same word appears in several names for example in the name of streets roads and avenues you can obtain the result faster if you enter the first letter of the street type For example enter PI A to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads e You can also search in postal codes This is useful when a street name is common and it is used in several districts of a city 7 1 3 Selecting the Home address You can select your Home address if you have already saved it ES P Destination Mfr Home 1 Tap the following buttons l p 2 The map appears with the selected point in the middle Tap The route is then automatically calculated and you can start navigating 7 1 4 Selecting the destination from your Favourites You can select a location that you have already saved as a
40. e for other than its designed application may result in fire electric shock or other injury DO NOT PLACE HANDS FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS Doing so may result in personal injury or damage to the product MINIMISE DISPLAY VIEWING WHILE DRIVING Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident DO NOT FOLLOW ROUTE SUGGESTIONS IF THE NAVIGATION SYSTEM INSTRUCTS YOU TO PERFORM AN UNSAFE OR ILLEGAL MANOEUVRE OR PLACES YOU IN AN UNSAFE SITUATION OR AREA This product is not a substitute for your personal judgment Any route suggestions by this system should never supersede any local traffic regulations or your personal judgment or knowledge of safe driving practice NVE M300P Navigation Module Owner s Manual 2 2 Caution HALT USE IMMEDIATELY IF A PROBLEM APPEARS Failure to do so may cause personal injury or damage to the product Return it to your authorised ALPINE dealer or the nearest ALPINE Service Centre for repair KEEP FINGERS AWAY WHILE THE MOTORISED FRONT PANEL OR MOVING MONITOR IS IN MOTION Failure to do so may result in personal injury or damage to the product Temperature Be sure the temperature inside the vehicle is between 10 to 50 C 14 to 122 F before turning your unit on Fuse Replacement When replacing the fuse s the replacement must be of the same amperage as shown on the fuse holder If the fuse s blow s more than once
41. e of characters the names that match the string appear in a list e Tap NN to open the list of results before it appears automatically 4 Select the settlement from the list 4 Enter the street name 1 Start entering the street name on the keyboard 2 Get to the list of results 30 NVE M300P Navigation Module Owner s Manual e After entering a couple of characters the names that match the string appear in a list e Tap OK to open the list of results before it appears automatically 3 Select the street from the list 5 Enter the house number 1 Enter the house number on the keyboard 2 Tap OK to finish entering the address 6 A list appears with the matching addresses Tap the desired one 7 The map appears with the selected point in the middle Tap Go The route is then automatically calculated and you can start navigating 7 1 2 3 Entering an address without knowing the district suburb Long roads can run across several districts or suburbs You may not know what particular house number is located where In this case follow the instructions below ES ie Destination PE Address 1 Tap the following buttons l l 2 By default Alpine Navigation Software proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of
42. ect from the list of available keyboard keyboard Alpine Navigation Software remembers your last keyboard choice and offers it the next time you need to enter data Correcting your entry on the Tap to remove the unneeded character s Tap and hold the button to delete the entire input string Entering a space for example between a first name and a family name or in multi word street names Entering symbols to switch to a keyboard offering symbol characters Finalising the keyboard entry 6 1 2 Permanent buttons Menu Return Monitor Control and Map There are buttons that appear on most screens at the same place of NVE M300P Navigation Module Menu button a Tap this button to open the Navigation menu the main menu of NVE M300P Navigation Module Return button E Tap this button to return to the previous screen Tap and hold this button to return to the Navigation menu Monitor Control button Tap this button to open the controls of the Alpine head unit NVE M300P Navigation Module is connected to 15 NVE M300P Navigation Module Owner s Manual Map button n This button is context sensitive It has multiple functions as described below Context fFuntin The application displays any other screen than the Map screen to open the Map screen The Map screen is open but the start of the active route is not the current GPS position to jump to the starting point of the reco
43. efore it becomes dark 6 3 4 Colour scheme in tunnels When entering a tunnel the colours of the map change All buildings disappear large objects such as surface waters or forests and empty areas between roads become black However roads and streets keep their original colours from the daytime or night colour scheme currently used After leaving the tunnel the original colours return 22 NVE M300P Navigation Module Owner s Manual 6 3 5 Route calculation and recalculation Alpine Navigation Software calculates the route based on your preferences e Route calculation method e Fast e Short e Economical e Easy e Vehicle types e Car e Taxi e Bus e Emergency vehicles e Road types e Unpaved Roads e Permit Needed e Motorways e Per use Toll e Period Charge e Ferries e Cross border Planning Alpine Navigation Software automatically recalculates the route if you deviate from the proposed itinerary Depending on the type of the TMC event Alpine Navigation Software also recalculates the route if a TMC event concerns a part of the recommended route For further information about Route Planning options see page 61 23 NVE M300P Navigation Module Owner s Manual 6 3 6 Turn List Itinerary The Itinerary is the list of the route events it equals the driving instructions Detailed Instructions 2 14 1st 36 m Parliament Square 1st 66 m Parliament Square 1st 22 m Great George
44. ently shown GPS position and an active Tap this area to make Alpine picture route route are available but Navigation Software recalculate calculation is needed _ automatic off route the recommended route recalculation is switched off Automatic off route recalculation and you deviated from the is also re enabled route If the icon is animated Alpine Navigation Software Nothing happens if you tap this route calculation is in is calculating or recalculating area of the screen progress the route Next route event next manoeuvre Tap this area to open the Route Information screen GPS position and an active route are available and you navigate the recommended route This area gives you information about the type and distance of the next route event 18 NVE M300P Navigation Module Owner s Manual The following information can be seen in the three data fields shown on the map screen Tap this area to open the Trip Information screen where you can select which values to be shown in these three fields When there is no active route these fields show the following information current speed compass and the current time of day lon Type Moreinformation compass Shows the direction of your heading both when the map is automatically rotated and when the map is always facing North Speed information There are speed values that can be shown e Current speed e
45. ew point is the highlighted point in the list You have the following options The selected point moves up in the list becomes a waypoint to be reached earlier Tap this button repeatedly and the point becomes the start point of the route when routing from a given location or the first waypoint to reach when routing from the GPS position The selected point moves down in the list becomes a waypoint to be reached later Tap this button repeatedly and the point becomes the final destination of the route Tap this button to optimise the route The start point and the destination remain at their position but the waypoints are reordered to make the shortest possible route R Tap this button to remove the selected point from the route The route remains as it was A before adding the new point 37 NVE M300P Navigation Module Owner s Manual Every time a new point is added the route is recalculated automatically and you can start navigating right away 7 3 Editing the route ES H Route Edit Route Tap the following buttons l l l The list of route points appear with the start point at the top of the list and the final destination at the bottom If several waypoints exist you might need to scroll between pages Tap one of the route points in the list You have the following options The selected point moves up in the list becomes a waypoint to be reached earlier Tap this button repeatedly and the point becomes the
46. f Traffic Traffic events Tap the Traffic button on the Map screen The colour of the Traffic button show the Traffic status i i There are no new unread Traffic events in the list il There are new Traffic events but they are not concerning your recommended route There are Traffic events on your route They were handled but it is better to take the concerned road segments rather then to avoid them Manual Traffic handling is selected in Settings and there are Traffic events on your route to be handled When you tap the button the list of current TMC events is displayed first ordered by their distance from your current position You can change the content of the list Description All TMC events received by Alpine Navigation Software appear in the list Only TMC events concerning a part of your active route appear in the list To check the currently received FM radio station to exclude radio stations or to manually tune to a radio station tap Button Description Use Auto tuner If Auto tuner is enabled the tuner of Alpine Navigation Software sweeps through the FM CCIR radio band searching for a TMC signal The first station with TMC data will be used automatically When no TMC signal is available the tuner keeps on searching Turn off Auto tuner to select a radio station manually 41 gt When Auto tuner is turned off search for the desired radio station manually with these buttons Exclude T
47. fter referred to as Use shall mean that the User has accepted the terms and conditions of this Agreement as legally binding 2 3 This Agreement shall by no means authorise use of the software product by those persons having unlawfully acquired the software product or having unlawfully installed it on a computer or in a vehicle 3 Relevant laws and regulations 3 1 To all issues not regulated by this Agreement the laws of the Republic of Hungary with specific reference to Act IV of 1959 on the Civil Code and to Act LXXVI of 1999 on Copyrights shall apply 3 2 The original language version of this Agreement is the Hungarian version This Agreement has versions in other languages as well In case of dispute the Hungarian version shall prevail 4 Object of the Agreement 4 1 The object of this Agreement shall be the navigation guidance software product of Licensor hereinafter referred to as the Software Product 4 2 The Software Product shall include the operating computer program its complete documentation the map database pertaining thereto and any third party content and services accessible through the Software Product hereinafter Database 4 3 Any form of display storage coding including printed electronic or graphic display storage source or object code or any other as yet undefined form of display storage or coding or any medium thereof shall be deemed parts of the Software Product 4 4 Error corrections additions upda
48. g You do not need this to access the basic navigation functions Tap and keep the screen pressing the following buttons to reach extra functions Tap and hold 5 on list and menu screens the Navigation menu appears and hold any of the d t IJ and buttons on the Map screen you can rotate tilt or scale the map continuously Tap and hold E on keyboard screens you can delete several characters quickly A Tap and hold or NE long lists you can scroll pages continuously Gestures drag amp drop You do not need gestures to access the basic navigation features You need to drag and drop the screen only in cases like Moving the handle on a slider Moving the map grab the map and move it in the desired direction Shortcut to open the Map screen slide your finger from the bottom right corner to the bottom left corner on any screen Shortcut to open the Navigation menu slide your finger from the top left corner to the bottom left corner on any screen Start using Alpine Navigation Software When you turn on NVE M300P Navigation Module for the first time you need to do the following 1 Select the written language of the application interface Later you can change it in Settings page 63 2 Select the language and speaker used for voice guidance messages Later you can change it in Settings page 63 3 Read and accept the End User Licence Agreement page 5 After this the Navigation menu ap
49. gt NM List All in this Group e Tolistall POIs in a given POI group tap 4 optional When finally the list of results appear you can sort the list Order by Name sort the list alphabetically available when you search around a single location Order by Distance T e sort the list by the distance from your current position in a straight line available when you search around a single location Order by Distance sort the list by the distance to drive on route from your current position available when you search along the active route Order by sort the list by the size of the needed detour available when you search along the active route Tap the desired POI in the list Review the details of the selected item and tap the name of the POI 6 7 The map appears with the selected point in the middle Tap NN The route is then automatically calculated and you can start navigating 7 1 6 Selecting the destination from the History The destinations that you have set earlier appear in the History 1 Tap the following ano E r estinatio W History l If necessary move between pages with wv to see earlier destinations Tap the desired item 3 4 The map appears with the selected point in the middle Tap NL The route is then automatically calculated and you can start navigating 36 NVE M300P Navigation Module Owner s Manual 7 1 7 Selecting the destination by entering
50. his Station Push this button to put the currently received FM radio station on an exception list and make Alpine Navigation Software search for another station instead Show Excluded Stations This button opens the list of radio stations previously excluded You can re enable any or all of the excluded stations 92 NVE M300P Navigation Module Owner s Manual 8 1 7 GPS Data screen Tap the status field d to open the GPS Data screen and to see the status of GPS reception GPS Data Accuracy Average Latitude N 51 52662 Longitude W 0 12435 GPS Time GMT 8 10 27 A Icon Colour Name Description Green GPS position quality Alpine Navigation Software has a indicator connection to the GPS receiver and GPS position information is available in 3D Alpine Navigation Software can calculate both your horizontal and vertical GPS position Yellow Alpine Navigation Software has a connection to the GPS receiver and GPS position information is available in 2D only the horizontal position is calculated Alpine Navigation Software cannot calculate your vertical GPS position Grey Alpine Navigation Software has a connection to the GPS receiver but GPS position information is not available Alpine Navigation Software has no connection to the GPS receiver Since the device has a built in GPS receiver this status should not appear under normal circumstances wh e in quality Alpine Navigation Soft
51. ilities can be performed with entering the postal code instead of the settlement name Find below an example with a full address ES P Destination Address 1 Tap the following buttons l l 2 By default Alpine Navigation Software proposes the country state and settlement where you are If needed tap the button with the name of the country state and select a different one from the list 3 Tap the button with the name of the settlement and enter the postal code 1 Start entering the postal code on the keyboard 2 Get to the list of results e After entering a couple of numbers matching results appear in a list e Tap OK to open the list of results before it appears automatically 3 Pick the settlement from the list 4 Enter the street name 1 Start entering the street name on the keyboard 2 Getto the list of results e After entering a couple of characters the names that match the string appear in a list e Tap NN to open the list of results before it appears automatically 3 Select the street from the list 5 Enter the house number 1 Enter the house number on the keyboard 2 Tap NN to finish entering the address 6 The map appears with the selected point in the middle Tap LN The route is then automatically calculated and you can start navigating 7 1 2 7 Tips on entering addresses quickly e When you are entering the name of a settlement or a street Alpine Navigation Software only displays thos
52. is an active route it plays the voice instructions and displays the turn oreview icon according to your current GPS position 21 NVE M300P Navigation Module Owner s Manual 6 3 2 3 Selected location Cursor If you select a location in the Destination menu or you tap the map when the map control buttons are visible the Cursor appears at the selected point on the map Alpine Navigation Software displays the Cursor with a large circle BB background of a 3D map view to make it visible at all zoom levels even when it is in the When the Cursor is set tap Eg The Cursor menu appears and you can use the Cursor as one of the following e the start point of a route e awaypoint in a route e the destination of a route You can also search for POls around the Cursor Or you can save the location of the Cursor as e aFavourite e aPOl 6 3 3 Daytime and night colour profiles Alpine Navigation Software uses different colour profiles during the day and during the night e Daytime colours are similar to paper road maps e The night colour profiles use dark colours for large objects to keep the average brightness of the screen low Alpine Navigation Software offers different daytime and night colour profiles lt can also switch automatically between the daytime and the night schemes based on the current time and GPS position a few minutes before sunrise when the sky has already turned bright and a few minutes after sunset b
53. its coordinates ES P Destination Coordinate 1 Tap the following buttons l Coordinate Display Format optional Tap to change the format of the displayed coordinates Tap the latitude or longitude value to change the coordinates Enter the coordinate values in WGS84 format on the keyboard the latitude N or S and the longitude E or W 6 The map appears with the selected point in the middle Tap NN The route is then automatically calculated and you can start navigating 7 2 Creating a multi point route inserting a waypoint Multi point routes are created from simple routes so a route must be active first with your final destination The way of expanding the route is to keep the destination and to add waypoints intermediate destinations 1 Select a new location as you did in the previous sections This will be the additional destination in the route 2 The map appears with the selected point in the middle New Waypoint 4 Tap to add the point as an intermediate destination preceding the final destination of the route 5 optional To add more points to the route repeat the above steps as many times as you like If you insert a waypoint in a route that is already a multi point route you will automatically be taken to the Edit Route screen where you can determine the position of the intermediate route point When you enter the screen the new waypoint is placed as the first waypoint to be reached The n
54. ives in Alpine Navigation Software e classic top down view 2D the top of the map always faces North e top down view 2D the top of the map always points in the current driving direction NVE M300P Navigation Module Owner s Manual 6 2 2 Lane information and Signposts When navigating on multilane roads it is important to take the appropriate lane in order to follow the recommended route lf lane informations are available in the map data Alpine Navigation Software displays the lanes and their directions using small arrows at the bottom of the map Arrows in yellow represent the lanes you need to take Where there is additional information available signposts substitute arrows Signposts are always displayed at the top of the map The colour and style of the signposts are similar to the real ones you can see above road or by the roadside They show the available destinations and the number of the road the lane leads to All signposts look similar when cruising when there is no recommended route When navigating a route only that signpost is displayed in vivid colours that points to the lane s to be taken all others are darkened out YS Hemel Hempstead tlt Dreieck Jackerath GPS eu near Hemel Hempstead 6 2 3 Status information and hidden controls on the map The following information appears in the top left corner the Turn Preview field When tapping this area the result depends on the information curr
55. ku Tokyo 141 0031 Japan Phone 03 5496 8231 ALPINE ELECTRONICS OF AMERICA INC 19145 Gramercy Place Torrance California 90501 U S A Phone 1 800 ALPINE 1 1 800 257 4631 1 888 NAV HELP 1 888 628 4357 ALPINE ELECTRONICS OF CANADA INC 777 Supertest Road Toronto Ontario M3J 2M9 Canada Phone 1 800 ALPINE 1 1 800 257 4631 1 888 NAV HELP 1 888 628 4357 ALPINE ELECTRONICS OF AUSTRALIA PTY LTD 161 165 Princess Highway Hallam Victoria 3803 Australia Phone 03 8787 1200 ALPINE ELECTRONICS GmbH Wilhelm Wagenfeld Str 1 3 80807 M nchen Germany Phone 089 32 42 640 ALPINE ELECTRONICS OF U K LTD ALPINE House Fletchamstead Highway Coventry CCV4 9TW U K Phone 0870 33 33 763 ALPINE ELECTRONICS FRANCE S A R L RCS PONTOISE B 338 101 280 98 Rue de la Belle Etoile Z I paris Nord Il B P 50016 95945 Roissy Charles de Gaulle Cedex France Phone 01 48638989 ALPINE ITALIA S p A Viale C Colombo 8 20090 Trezzano Sul Naviglio MI Italy Phone 02 484781 ALPINE ELECTRONICS DE ESPANA S A Portal de Gamarra 36 Pabell n 32 01013 Vitoria Alava APDO 133 Spain Phone 945 283588 ALPINE ELECTRONICS BENELUX GmbH Leuvensesteenweg 510 B6 1930 Zaventem Belgium Tel 02 725 1315 2009 NAVTEQ All Rights Reserved 2009 ALPINE Electronics Inc All Rights Reserved 12
56. l the possible options Options A The location of the Cursor is saved as the Home address Set as Home Save as POI The Cursor is saved as a user POI Select the POI group and give a name a for the POI then select a suitable icon enter a phone number and additional information if you like Set as Start The Cursor becomes the start point of the route This means that the route t dS star is not started from the current GPS position and Automatic Off route Recalculation needs to be turned off to keep the selected point as the start point This button is similar to the button but a new screen opens and the route is calculated with all the possible route calculation methods Fast Short Economical and Easy Observe the results and choose one of the routes to navigate The Cursor is added to the active route as an intermediate route point a yp point to be reached before the destination If there is already a waypoint in the route the Edit Route screen opens to let you decide where the new waypoint is to appear in the route 4 Add to Favourites The location of the Cursor is added to the list of frequently visited destinations the so called Favourites You can give a name for the Favourite 20 NVE M300P Navigation Module Owner s Manual 6 3 Alpine Navigation Software concepts 6 3 1 Auto Zoom Auto Zoom provides much more than just a usual automatic zoom feature e While following a route calculated by Alpi
57. mmended The map is moved or rotated it does not follow the current GPS position and or is not rotated automatically Tap to move the map back to the current GPS position If the map has been rotated automatic map rotation is also re enabled The map is at the current GPS position with automatic map rotation normal navigation Tap to repeat the current voice instruction The distance is updated to always describe the current situation This means you can return to the Map screen from any other screen with one touch of this button but sometimes you need to tap the button several times to play the current voice instruction 6 2 Using the map The map screen is the most A used screen of Alpine Navigation Software lt can be accessed from any other screen by tapping A z 32 km h Caries oue Ue LEN A gt N Z2 A For further information about the map screen see page 42 6 2 1 Manipulating the map Position markers on the map 16 NVE M300P Navigation Module Owner s Manual The following controls help you modify the map view to suit your actual needs the best Most of these controls appear only if you tap the map once and disappear after a few seconds of inactivity Action Button s Moving the map No buttons with drag amp drop Zooming in and out You can move the map into any direction tap and hold the map and move your finger to the direction in which you want to move the map
58. ne Navigation Software when approaching a turn it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction If the next turn is at a distance it will zoom out and lower the view angle to be flat so you can see the road in front of you e While driving without an active route in Alpine Navigation Software Auto Zoom will zoom in if you drive slowly and zoom out when you drive at high speed 6 3 2 Position markers 6 3 2 1 Current GPS position and Lock on Road a your GPS position is available Alpine Navigation Software marks your current position with the icon on the map The exact location of the position marker depends on the vehicle type used for route calculation The vehicle type can be selected in Route settings page 61 IN If you choose any of the vehicles the icon may not show your exact GPS position and heading If roads are near it is aligned to the nearest road to suppress GPS position errors and the direction of the icon is aligned to the direction of the road 6 3 2 2 Returning to normal navigation When GPS position is available and you have moved the map the icon is moving or is not even visible or you have rotated the map in 3D or rotated 2D mode tap to move the map back to the GPS position and re enable automatic map rotation Even if you move the map while you are driving Alpine Navigation Software continues navigating if there
59. ne tune the position of the screen content on the display Tap this button use the arrows to reposition the application window and then tap to save the changes and exit 8 5 6 Navigation settings You can control how Alpine Navigation Software behaves during navigation y Settings Navigation Tap the following buttons Description Keep Position on Road This feature allows drivers to always correct GPS position errors by matching the vehicle position to the road network By turning off this feature you also turn off the GPS position error filtering The position shown on the map will be subject to all position errors and position fluctuations Off route Recalculation This switch tells Alpine Navigation Software whether to automatically recalculate the route when you deviate from it If this feature is turned off you need to initiate route recalculation manually otherwise navigation will be stopped until you return to the originally recommended route Setting another point than the current GPS position as the start point of the active route will automatically disable this feature Restore Lock to Position If you have moved or rotated the map during navigation this feature moves the map back to your current GPS position and re enables automatic map rotation after the given period of inactivity 8 5 7 Warning settings You can enable some useful warnings and disable the touch screen in a moving vehicle with Safety
60. ning the type of the camera and the monitored speed limit appear on the Map screen while you are approaching one of these cameras This button is not displayed when GPS position is not available or if you are in certain countries where Road Safety Camera warning is prohibited Even if the button is available you are responsible for checking whether it is legal to use this feature at your location 8 5 8 GPS You can open the GPS Data screen y Settings v Tap the following buttons 8 5 9 TMC You can select the FM radio station to be received for TMC messages Tap the following buttons Button Description 22 Use Auto tuner If Auto tuner is enabled the tuner of Alpine Navigation Software sweeps through the FM CCIR radio band searching for a TMC signal The first station with TMC data will be used automatically When no TMC signal is available the tuner keeps on searching Turn off Auto tuner to select a radio station manually 41 When Auto tuner is turned off search for the desired radio station manually with these buttons Exclude This Station Push this button to put the currently received FM radio station on an exception list and make Alpine Navigation Software search for another station instead 65 NVE M300P Navigation Module Owner s Manual Show Excluded Stations This button opens the list of radio stations previously excluded You can re enable any or all of the excluded stations 8 5 10
61. nncnnnnnonnnnnonononononononnnnnnnnnnnnnnnnnononnnanos 37 7 2 Creating a multi point route inserting a waypoint ooooooooconooaananannnncnnnnnnnnnnnnnnnononnnannnnnnnnnnnns 37 PL ETO na A E I 38 7 4 Watching the simulation Of the route esses esee nnn nnns 38 VASE FOAUSING INC ACNE ROME o 38 7 6 Deleting the next waypoint from the route eee eene eene 39 P BITS RRE AA O 39 ASA o A a 39 TDMA Te COM V CHOU EEA EE m 40 7 AO LOGGING a saved TOTO ari A dc 4 AAA E O ETE RE o yq A 42 ll COS Mls CC MA pilot 44 Odell GPS postiomquality aud Track log TICA AA AR 44 8 1 1 2 Next route event Turn Preview field eee eeeeeeeeeeeeeeeeeeeeeeee nnn hh rrr n nns 45 SIN IP O o oe SO DN NU BILE o CO PO APN o e A 46 SOC GING 8 091017 BRIT tne seecuestiauude taberaeiatebeadytneerecnaneaekde Rabereueetemeadeaneaecneneaskceaseees 46 8 1 2 2 3D Object types sacsecssessescsesssessvessessusssossnessvssnesanessessuessussnessnsaneeancaneesuessarsnessossnsssnesneesuessacsnessnsensesueaneessees 46 OL Elements OF the ACTIVE FOU A A os 47 A tO E EE ketadiantote 48 5 14 Route Information SOL CEN aia 49 8 1 5 Trip Information screen 4225 0cscereasncdanssasecenos one se douceeaersnantdanosanecenasinisadsnseanaeenanedanoacecannionieadancemenoantes 50 BIO TED A e ibe E E ae passat E oU aes 51 SLO TMC muri eic 22 AC OT 53 AE AAA en oO 54 A e UE RO 54 OPI ME
62. not warrant that the Software Product is capable of interoperating with any other system device or product e g software or hardware 8 3 The Licensor does not assume any responsibility for damages incurred due to an error in the Software Product including errors of the computer program the documentation and the Database 8 4 The Licensor does not assume any responsibility for damages incurred due to the Software Product not being applicable for any defined purpose or due to the error or incompatibility of the Software Product with any other system device or product e g software or hardware 8 5 The Licensor also draws the attention of the User to the fact that when using the Software Product in any form of vehicle observing the traffic regulations and rules e g use of obligatory and or reasonable and suitable security measures proper and generally expected care and attention in the given situation and special care and attention required due to the use of the Software Product is the exclusive responsibility of the User The Licensor shall not assume any responsibility for any damages occurred in relation to use of the Software Product in a motor vehicle 8 6 By concluding the Agreement the User shall in particular acknowledge the information stated in Section 8 above NVE M300P Navigation Module Owner s Manual 9 Sanctions 9 1 The Licensor hereby informs the User that if the Licensor finds its rights under the Copyright A
63. nstration of the route at normal speed page 25 3 4 Edit menu You can manage the content that PX it Software stores Tap the following buttons E Button Description Reference Renaming or deleting Favourites page 56 Favourites Personal POI Updating or deleting POls page 56 Creating updating or deleting POI groups Modifying POI visibility settings Renaming or deleting saved routes page 57 Saved Routes Recording simulating renaming or deleting track logs page 58 Track Logs assigning colour to them to be shown on the map 55 NVE M300P Navigation Module Owner s Manual 8 4 1 Manage Favourites You can manage the list of your Favourites ii Button Description Button with the name of the Opens the selected Favourite for editing Favourite BM w Deletes the selected item in the list of Favourites Clears the list of Favourites Moves between pages for additional list items Tap the following buttons gt a 8 4 2 Manage POIs You can manage your POls and set POI visibility for both your POls and the ones that came with the product Tap the following buttons I l Button Icon Button with the name of the Opens the list of the subgroups of this POI group The new list POI group behaves the same as this one Button with the name and Opens the selected POI for editing Only the POIs you have created address of a POI item appear in this list Edit Opens the selected POI group
64. nt If automatic off route recalculation is disabled for any of the above tapping the O icon in the Turn Preview field not only initiates route recalculation from the current GPS position but it will re enable the automatic off route recalculation as well A waypoint is an intermediate destination You can Waypoint place as many waypoints as you want Destination end point The last point of the route the final destination Route colour The route always stands out with its colour on the map both in daytime and in night colour mode The active leg of the route is always displayed in a brighter shade than the inactive upcoming legs Active leg of the route Cursor selected map location The section of the route on which you are driving If you have not added any waypoints only a destination the entire route is the active leg If you have added waypoints the active leg is the part of the route from your current location to the next route point the next waypoint or the destination if there are no more waypoints to reach Inactive legs of the route The future sections of the route each of them becomes active when you reach the waypoint at its beginning Streets and roads that are You can choose whether you want to use or avoid excluded from the navigation certain road types page 61 However when Alpine 47 NVE M300P Navigation Module Owner s Manual Symbol Name Description Navigation Software cann
65. on and Automatic Off route Recalculation needs to be turned off to keep the selected point as the start point If the Cursor is at or near the selected start point this button replaces the Remove Start previous one and deletes the start point from the route The current GPS position is used again as the start point and Automatic Off route Recalculation is re enabled This button is similar to the button but a new screen opens and the route is calculated with all the possible route calculation methods Fast Short Economical and Easy Observe the results and 48 NVE M300P Navigation Module Owner s Manual MN choose one of the routes to navigate New W int The Cursor is added to the active route as an intermediate route point a EW Vvaypoin point to be reached before the destination If there is already a waypoint in the route the Edit Route screen opens to let you decide where the new waypoint is to appear in the route If the Cursor is at or near one of the waypoints this button replaces the previous one and deletes the selected waypoint from the route The route is recalculated without the deleted point Add to Favourites The location of the Cursor is added to the list of frequently visited destinations the so called Favourites You can give a name for the Favourite 3 1 4 Route Information screen The Route Information screen has all the data and some of the functions you need while you navigate There a
66. ossible delays GPS Time Shows the current time corrected with time zone offset The accurate time comes from the GPS satellites and the time zone information comes from the map or it can be set manually in Regional settings Altitude Shows the elevation if it is provided by the GPS receiver Shoes Shows the speed limit of the current road if the map contains it he Tri Trip Computer Opens the Trip Computer screen Tap this button if you want to change the content of the three data fields on the Map screen 8 1 5 1 Trip Computer screen The Trip Computer screen provides collected trip data It can be opened from the Trip Information Trip Computer screen by tapping The fields on this screen are continuously updated while you keep the screen open You can switch between the trips pause then resume them or reset their data You have the following functions on this screen Description Pauses the trip currently shown on the screen Values on the screen stop changing This button replaces the previous one if it has been activated Tap it to resume collecting trip data Cycles through all trips Resets all counters of the currently shown trip Collecting trip data is restarted only when Alpine Navigation Software receives a position from the GPS A 91 NVE M300P Navigation Module Owner s Manual 8 1 6 TMC Events screen You can access the list of TMC events and select or ignore specific radio stations in the list o
67. ot avoid such roads the route will include them and it will show them in a colour that is different from the route colour 8 1 3 Cursor menu As soon as you select one point in the Destination menu the map appears with the Cursor menu a menu with possible actions for the selected point MN when t tap the map control buttons appear Tap again to place the Cursor O Now tap and the Cursor menu opens with a list of options You can perform the following actions B Closes the Cursor menu and returns to the previous screen Displayed at the Cursor if it has been relocated since the Cursor menu was opened With the Cursor menu open you can still move or scale the map and tap the map anywhere to place the Cursor to a new location but when you use this button the Cursor jumps back to the place where it was at the time when you opened the Cursor menu Creates a new route with the Cursor as the destination The previous route if exists is deleted options Opens the full screen Cursor menu with all the possible options n The location of the Cursor is saved as the Home address Set as Home RIS PO The Cursor is saved as a user POI Select the POI group and give a name SAVE dS for the POI then select a suitable icon enter a phone number and additional information if you like Set as Start The Cursor becomes the start point of the route This means that the route et dS otar is not started from the current GPS positi
68. ou can find an address by entering e the exact address including house number e the centre of a settlement e an intersection e the midpoint of a street e any of the above starting the search with the postal code page 34 7 1 2 1 Entering an address The parts of the address are shown on buttons Start reading from the top and if you want to change any of them tap the button Find Address WI pr United Kingdom M London Street Name A ES P Destination IE Address 1 Tap the following buttons l 2 By default Alpine Navigation Software proposes the country and settlement where you are If needed tap the button with the name of the country and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed the City Name country state tap otart entering the settlement name on the keyboard Get to the list of search results e After entering a couple of characters the names that match the string appear in a list e Tap NN to open the list of results before it appears automatically 4 Select the settlement from the list 29 NVE M300P Navigation Module Owner s Manual 4 Enter the street name 1 Start entering the street name on the keyboard 2 Getto the list of results
69. our of Alpine Navigation Software Tap the following buttons l The Settings menu has more pages of submenus Tap I T to access the other options Settings Settings Map Screen Display Adjustment Sound Navigation Route Planning Warnings Regional Yv GPS v 58 NVE M300P Navigation Module Owner s Manual Button Description Reference You can fine tune the appearance and content of the Map page 59 You can adjust the sounds of Alpine Navigation Software page 60 Sound s These settings determine how routes will be calculated page 61 Route Planning e These settings allow you to customise the application for your page 63 Regional local language measurement units time and date settings and formats as well as to choose the voice guidance profile you prefer You can fine tune display related settings in this menu page 63 5 TMC You can select the FM radio station to be received for TMC P99 65 messages Track Logs You can set up automatic Track Log saving and fine tune P498 66 related settings You can manage the data you have saved e g POls page 67 DeU Favourites or History and the settings you have made in the program About This screen has no navigation feature It merely provides information about the maps and licenses included with your navigation system 8 5 1 Map Screen settings You can fine tune the appearance and content of the Map screen NW L e Tap the following
70. pears and you can start using Alpine Navigation Software 12 NVE M300P Navigation Module Owner s Manual The Navigation menu Navigation Menu E Destination F Route P Edit f settings The typical way of using Alpine Navigation Software is to select a destination and start navigating You can select your destination in the following ways e Use the selected location on the map the Cursor page 28 e Enter a full address or a part of an address for example a street name without a house number or the names of two intersecting streets page 29 e Enter an address with postal code page 34 This way you do not need to select the name of the settlement and the search for street names might be faster as well e Usea coordinate page 37 e Use a saved location e aFavourite page 35 e a POl page 35 e the History of previously set destinations and waypoints page 36 13 NVE M300P Navigation Module Owner s Manual 6 1 Buttons and other controls on the screen When you are using Alpine Navigation Software you usually tap buttons on the touch screen You only need to confirm selections or changes in Alpine Navigation Software if the application needs to restart it needs to perform a major reconfiguration or you are about to lose some of your data or settings Otherwise Alpine Navigation Software saves your selections and applies the new settings without confirmation as soon as you use the cont
71. py of the Software Product or a preinstalled copy of the Software Product thereon NVE M300P Navigation Module Owner s Manual 6 2 The User is entitled to make one backup copy of the Software Product However if the Software Product operates after installation without the use of the original media copy then the original media copy shall be deemed to be a backup copy In all other cases the User is only entitled to use the backup copy if the original media copy of the Software Product has been ascertainably and unequivocally rendered unsuitable for its lawful and intended use 7 Limitations of use 7 1 The User is not entitled 7 1 1 to duplicate the Software Product to make a copy thereof 7 1 2 to lease rent or lend it or to transfer it to a third person for any reason 7 1 3 to translate the Software Product including translation compilation to other programming languages 7 1 4 to decompile the Software Product 7 1 5 to evade the protection of the Software Product or to modify circumvent or obviate such protection through technological or by any other means 7 1 6 to modify extend transform the Software Product in whole or in part to separate it into parts combine it with other products install it in other products utilise it in other products not even for the purpose of achieving interoperability with other devices 7 1 7 apart from using the computer program to obtain information from the Database as a part of
72. r position on the map If you move the map both the street names and POI icons reappear immediately 2D Auto Zoom Level Turn off or set the zoom level of the Auto Zoom feature in 2D map view modes 8 5 2 Sound settings You can adjust the sounds of Alpine Navigation Software Tap the following buttons Z stins Sound Sound Buon Description Key sounds provide audible confirmation of either pressing hardware buttons or tapping the touch screen Key Beep The switch turns key sounds on or off Key sounds are played at the master volume level 60 NVE M300P Navigation Module Owner s Manual 8 5 3 Route Planning options These settings determine how routes will be calculated ES f Settings Route Planning Tap the following buttons Button Description Vehicle You can set the type of vehicle you will use to navigate the route Based upon this setting some of the road types can be excluded from the route or some of the restrictions may not be taken into account in route calculation Road Types Used for Route l To let the route fit your needs you can also set which road types are Planning to be considered for or to be excluded from the route if possible Excluding a road type is a preference lt does not necessarily mean total prohibition If your destination can only be accessed using some of the excluded road types they will be used but only as much as necessary In this case a warning icon
73. re two ways to open this screen e It can be opened directly from the Map screen by tapping the Turn Preview field nu ES H Route e From any of the menu screens tap the following buttons Route Info Route Information total EEXT3 ESIA E40 E 40 Destination Battersea Park Road Estimated Arrival Time Left Distance Left Method 15 37 5 52 517 km Fast i ih th a E Settings Remove Next Waypoint In the top section of the screen you see information about the current route The fields on this screen are continuously updated while you keep the screen open When you open the screen all fields contain information about reaching your final destination Tap any of the fields to see data on the waypoints starting from the first one through the final destination again You have the following data and functions on this screen Name Description Function Route line The upper part of this screen shows your Tap this field to change the planned route as a horizontal line Its leftmost content of all data fields to point is the start of the route the rightmost one waypoint information is the final destination and you can see your waypoint flags along the line spaced in proportion to their distance Estimated Arrival Shows the estimated arrival time at the final Time destination of the route based on information available for the remaining segments of the route The calcula
74. rols Type Example Description Howtouseit Button 3 Tap it to initiate a function to Tap it once open a new screen or to set a parameter Icon Shows status Infra om Some icons also function as a button Tap them once List ge zu When you need to select from Move between pages with EX P several options they appear in a A es st the and WE Espa ol buttons and tap the value that you want Francais Slider When a feature has several Drag the handle to different unnamed values move the slider to its Alpine Navigation Software new position shows an indicator on a gauge that displays and sets a value Tap the slider where from a range you want the handle to appear the thumb jumps there Switch When there are only two Tapitto turn the switch on choices a checkmark shows jor off whether the feature is enabled Each key is a touch screen button Alphabetic and alphanumeric mE keyboards to enter text and ll l l ll TED numbers 14 NVE M300P Navigation Module Owner s Manual 6 1 1 Using keyboards You only need to enter letters or numbers in Alpine Navigation Software when you cannot avoid it You can type with your fingertips on the full screen keyboards and you can switch between various keyboard layouts for example ABC QWERTY or numerical Switching to another keyboard layout for example from an English l QWERTY keyboard to a Greek Ma k and sel
75. roup or subgroup Group 8 4 3 Manage Saved Routes You can manage the previously saved routes Tap the following buttons a NN Saved Routes Button with the name of the Opens the selected route for editing saved route Deletes the selected route Clears the list of saved routes Moves between pages for additional list items 57 NVE M300P Navigation Module Owner s Manual 8 4 4 Manage Track Logs Description Record Starts recording the track that you drive Stop Stops the ongoing Track Log recording Recording Button with the name of the Shows the details of the selected Track Log Starts a simulated playback of the selected Track Log on the map Moves between pages for additional list items When track log details are shown Button with the name of the Opens a keyboard screen to let you rename the Track Log Tap this button to hide the Track Log on the map No colour will be assigned to the Track Log Tap one of the coloured buttons to assign a colour to the Track Log The Track Log will be shown on the map with this colour The map returns with the Track Log The map is scaled to show the whole Track Log Delete Deletes the selected Track Log Saves the Track Log onto an inserted USB stick in GPX format You can record Track Logs then play them back display them on the map and view their details Tap the following buttons Mu a 8 5 Settings menu You can configure the E Wa and y the behavi
76. service and any damage arising in relation to the service or for complete cancellation of the service The relevant information and data in connection with the contents and services provided by third parties are available at www navngo com The User hereby acknowledges that the contents and services provided by third parties may only be used at the risk of the User and for the personal benefit of the User 9 4 Contents and services provided by the Licensor or an agent of the Licensor The Licensor or a contractual partner may offer various products and services to the User through www naviextras com The User may only use these services when the User has read and understood the relevant end user licence agreement s at www naviextras com and the User is obliged to use the services in line with the terms and conditions thereof 9 5 The parties hereby agree that depending on the nature of the dispute either the Pest Central District Court Pesti K zponti Ker leti Birosag or the Metropolitan Court of Budapest F v rosi B r s g will have exclusive jurisdiction to rule on any disputes arising in connection with this Agreement NVE M300P Navigation Module Owner s Manual 4 Copyright note The product and the information contained herein is subject to change without prior notification This manual may not in whole or in part be reproduced or transmitted in any form either electronically or mechanically including photocopying and re
77. tart point and only one destination Multi point routes contain one or more waypoints intermediate destinations The last route point is the final destination and the route is cut into different legs from one destination to the next Scheme Alpine Navigation Software comes with different colour schemes for the map for daytime or night use Schemes are custom graphic settings for the map and they can have different colours for streets blocks or surface waters in 2D and 3D modes and they display shades or shadows in different ways in 3D mode One daytime scheme and one night scheme is always selected Alpine Navigation Software uses them when it switches from day to night and back Track up map orientation In Track up mode the map is rotated so its top always points in the current driving direction This is the default orientation in 3D map view mode See also North up map orientation Road Safety Camera A special POI type for speed cameras and red light cameras Different data sources are available and you can also mark the position of a Road Safety Camera on the map You can configure Alpine Navigation Software to warn you when you approach one of these cameras Detecting the location of Road Safety Cameras is prohibited in certain countries lt is the sole responsibility of the driver to check whether this feature can be used during the trip 69 NVE M300P Navigation Module Owner s Manual 10 In the Box 10 1 Accessories N
78. tes used by the User following the conclusion of this Agreement shall also be deemed parts of the Software Product 5 Rights under copyright 5 1 Unless otherwise provided by law or contractual provisions the Licensor is the sole and exclusive owner of all material copyrights vested in the Software Product 5 2 Copyrights extend to the whole Software Product and to its parts separately as well 5 3 The owner s of the copyrights of the Database forming part of the Software Product is are the natural person s or corporate entity ies listed in the Appendix to this Agreement or in the About menu item of the operating computer programme hereinafter referred to as Database Owner The user s manual of the Software Product includes the name of the menu option where all the owners of the Database items are listed The Licensor hereby states that it has obtained sufficient usage and representation rights from the Database owners in order to utilise the Database to offer it for utilisation and to transfer it for utilisation as set forth in this Agreement 5 4 Pursuant to this Agreement all rights vested in the Software Product shall remain in the ownership of the Licensor except for those to which the User is entitled under law or by virtue of this Agreement 6 Rights of the User 6 1 The User is entitled to install the Software Product into one hardware device desktop handheld portable computer navigation device and to run and use one co
79. the Software Product to decompile the Database to use copy modify extend transform the Database in whole or in part or the group of data stored therein or to install it in other products or otherwise utilise it in other products or to transfer it not even with the aim of achieving interoperability with other products 7 2 The User may only use the contents available through the Software Product and provided by third parties and the data received through the services provided by third parties including but not limited to the traffic data received from the RDS TMC traffic information service for his her own personal benefit and at his her own risk It is strictly prohibited to store to transfer or to distribute these data or contents or to disclose them in full or in part to the public in any format or to download them from the product 8 No warranty or limitation of responsibility 8 1 The Licensor hereby informs the User that although the greatest care was taken in producing the Software Product given the nature of the Software Product and its technical limitations the Licensor does not provide a warranty for the Software Product being completely error free and the Licensor is not bound by any contractual obligation whereby the Software Product obtained by the User should be completely error free 8 2 The Licensor does not warrant that the Software Product is suitable for any purpose defined either by the Licensor or the User and does
80. the Fast route but it takes other roads as well to save fuel Easy Results in a route with fewer turns With this option you can make Alpine Navigation Software to take for example the motorway instead of series of smaller roads or streets 62 NVE M300P Navigation Module Owner s Manual 8 5 4 Regional settings These settings allow you to customise the application for your local language measurement units time and date settings and formats as well as to choose the voice guidance profile you prefer vs puton lil DAI Tap the following buttons E l Button Description Program Language This button displays the current written language of the Alpine Navigation Software user interface By tapping the button you can select a new language from the list of available languages The application will restart if you change this setting you are asked to confirm this voce Prole This button shows the current voice guidance profile By tapping the button you can select a new profile from the list of available languages and speakers Tap any of these to hear a sample voice prompt Just tap OK when you have selected the new spoken language Units You can set the distance units to be used by the program Alpine Navigation Software may not support all the listed units in some voice guidance languages If you select a measurement unit not supported by the chosen voice guidance language a warning message will appear
81. the country state and select a different one from the list 3 If needed change the settlement e To select the settlement from the list of recently used ones tap the button e To enter a new settlement 1 Tap the button with the name of the settlement or if you have changed the City Name country state tap 2 Start entering the settlement name on the keyboard 3 Get to the list of search results e X After entering a couple of characters the names that match the string appear in a list e Tap OK to open the list of results before it appears automatically 4 Select the settlement from the list 4 Enter the street name 1 Start entering the street name on the keyboard 2 Getto the list of results e After entering a couple of characters the names that match the string appear in a list e Tap oK to open the list of results before it appears automatically 3 Select the street from the list 32 NVE M300P Navigation Module Owner s Manual 5 Tapthe button e fonly a few intersecting streets exist their list appears immediately e Incase of a longer street a keyboard screen appears Start entering the name of the intersecting street on the keyboard As you type if the matching streets can be shown on one screen their list appears automatically 6 Tap the desired intersecting street in the list 7 The map appears with the selected point in the middle Tap Go The route is then automati
82. tion cannot take into account traffic jams and other possible delays 49 NVE M300P Navigation Module Owner s Manual Name Description Function Time Left Shows the time needed to reach the final n a destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays Distance Left Shows the distance you need to travel on the n a route before reaching your final destination Method This field shows how the route was calculated It n a either displays the Route Calculation Method or the Vehicle field from the Route Planning options If you have chosen Car Taxi or Bus the type of the route Fast Short Easy or Economical will be displayed here if you have selected Emergency only this information will be displayed here Warning icons In these square fields graphical symbols are Tap any of the icons for an displayed in case warnings are attached to the explanation planned route These are warnings so icons always show information for the whole route even if the data fields display values from your current position to a waypoint only Opens the Route Planning options screen from the Settings menu Appears only if at least one waypoint exists Deletes the next waypoint Delete Appears only if there are no waypoints in the Deletes the active route Route route 8 1 5 Trip Information screen The Trip
83. to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route e f you choose this option automatic off route recalculation will be disabled e f you choose to keep the current GPS position as the start point the route will be recalculated starting from your current position Go 4 The map appears Tap o ce and start navigating 41 NVE M300P Navigation Module Owner s Manual 8 Reference Guide On the following pages you will find the description of the different menu screens of Alpine Navigation Software The Navigation menu Alpine Navigation Software starts with the Navigation menu From there you can access the following screens Button Description A P Destination Selecting the destination for example an address or a POI or using the search engine of Alpine Navigation Software for any other reason for example to look for the phone number of a POI Managing the active route obtaining information about it changing or deleting H Route it or parts of it or planning a route without GPS reception f di Managing user data such as saved locations POIs and Favourites Saved p Edit Routes and Track Logs Managing the behaviour of Alpine Navigation Software for example the map settings layout during navigation the used languages or the warnings 8 1 Map screen Alpine Navigation Software is primarily intended for land navigation That is
84. tual building size and position on the map Building data is limited to the city centres of major cities in the US and Europe 3D terrain 3D terrain map data shows changes in terrain elevations or depressions in the land when you view the map and use it to plot the route map in 3D when you navigate EE ES Settings To fine tune 3D visualisation on the map tap the following buttons i Map Screen 3D Settings NVE M300P Navigation Module Owner s Manual 8 1 2 3 Elements of the active route Alpine Navigation Software shows the route in the following way Symbol Name Description Current GPS position Your current position displayed on the map If any vehicle type is selected for route calculation and roads are near the symbol is put on the nearest road The location selected in the Destination menu or a map point selected by tapping the map yy Start point The first point of the route Normally if GPS position is available it is the start point of the route If there is no valid GPS position Alpine Navigation Software uses the last known GPS position as the start point When you are using a saved route Alpine Navigation ooftware asks you if you want to use your GPS position or the first point in the saved route as the start point You can also modify the start point in the Cursor menu If you do so automatic off route recalculation needs to be turned off to keep the selected point as the start poi
85. user data and the current settings will be saved on an inserted USB stick There is always one backup file If you perform a backup later the previous backup will be overwritten with the new information Restore User Data All user data and settings will be overwritten with the information stored in the backup file Data and settings created after the latest backup will be lost Reset All Settings All settings will return to their factory defaults but no user data will be deleted The application needs to restart 67 NVE M300P Navigation Module Owner s Manual 9 Glossary 2D 3D GPS reception The GPS receiver uses satellite signals to calculate its your position and needs at least four signals to give a three dimensional position including elevation Because the satellites are moving and because objects can block the signals your GPS device might not receive four signals If three satellites are available the receiver can calculate the horizontal GPS position but the accuracy is lower and the GPS device does not give you elevation data only 2D reception is possible Active route The currently navigated route You can save and load routes in Alpine Navigation Software but only one route can be active at any given time and it is always active until you delete it reach your destination or you quit Alpine Navigation Software See also Route City Centre The City Centre is not the geometric centre of the settlement but an
86. vigation Software are available in the History list e You can select your destination from the thousands of POIs page 35 1 PO included with Alpine Navigation Software or from the ones you have previously created Favourites You can select a prevously saved Favourite location as P899 ds your destination s You can select your destination by entering its coordinates page 37 8 3 Route menu H Route Save load and edit your routes Tap the following buttons an CES Button BDescripion Reference Route Info Opens a screen with useful route data page 49 Turn List You can browse the driving instructions that Alpine page 24 Navigation Software follows during navigation You can exclude manoeuvres or streets to adjust the route to your preferences Edit Route You can modify the route remove route points or change page 38 their order 54 NVE M300P Navigation Module Owner s Manual Button Description Reference Change Method You can modify the routing method used to calculate the recommended route Scroll to the next page of menu points NEM Load Route You can load a previously saved route for navigation page 41 You can save the active route for later use page 40 Erase the active route with all its route points start point page 39 waypoints and destination If you later decide that you need the same route you will have to rebuild it from scratch You can run a demo
87. ware is Inking Indicator connected to the GPS receiver Alpine Navigation Software has no connection to the GPS receiver but it is still trying to establish a connection Red blinking Alpine Navigation Software has no connection to the GPS receiver and is not trying to establish a connection Sky view circle The virtual sky shows the visible part of the sky above you with your position as the centre The satellites are shown at their current positions The GPS receives data from both the green and yellow satellites Signals from the yellow satellites are only received while green ones are used by the GPS receiver to calculate your current location 53 NVE M300P Navigation Module Owner s Manual Colour Name Description n a Coordinates Your current GPS position in WGS84 format Status bar for the satellites Dark bars are for the yellow and lit bars are for the green satellites The more satellites your GPS tracks the green ones the better is your calculated position 8 2 Destination menu Destination Select the destination of your route Tap the following buttons a r Buton Description Reference Address If you know at least a part of the address this is the page 29 quickest way to find the location z Home You can select the previously saved Home location as your page 35 destination r The destinations that you have already entered in Alpine page 36 History Na
88. wn judgment and your ability to ask for directions in these situations e The map database contained within the media in which it is stored is the most recent map data available at the time of production Because of changes in streets and neighbourhoods there may be situations where the navigation system may not be able to route you to your desired destination In these cases use your own personal judgment e The map database is designed to provide you with route suggestions It does not take account of the relative safety of a suggested route or of factors which may affect the time required to reach your destination The database does not reflect road closures or construction road characteristics i e type of road surface slope or grade weight or height restrictions etc traffic congestion weather conditions or any other factors which may affect the safety or timing of your driving experience Use your personal judgment if the navigation system is unable to provide you with an alternate route e here may be situations where the navigation system may display the vehicle s location erroneously Use your own driving judgment in this situation taking into account current driving conditions Please be aware that in this situation the navigation system should correct the vehicle s position automatically however there may be times when you may have to correct the position yourself If this is the case stop the vehicle in safe and legal manner

Alpine NVE-M300P

Contents

Download Pdf Manuals

Related Search

Related Contents