HIS H435H512HDP AMD graphics card
Contents
1. ATI logo Avivo Catalyst Catalyst Control Center CrossFireX HyperMemory PowerPlay Radeon SurroundView The Ultimate Visual Experience and combinations thereof are trademarks of Advanced Micro Devices Inc HyperTransport is a licensed trademark of the HyperTransport Technology Consortium Microsoft Windows and Vista are registered trademarks of the Microsoft Corporation in the United States and or other jurisdictions Other names are for informational purposes only and may be trademarks of their respective owners Dolby Laboratories Inc Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 1992 1997 Dolby Laboratories Inc All rights reserved Macrovision Apparatus Claims of U S Patent Nos 6 856 549 6 581 747 7 050 698 6 516 132 and 5 585 956 Licensed for limited viewing uses only This product incorporates copyright protection technology that is protected by US patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Disclaimer While every precaution has been taken in the preparation of this document Advanced Micro Devices Inc assumes no liability with respect to the operation or use of AMD hardware software or other products and doc2. a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with manufacturer s instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correctthe interference by one or more of the following measures Re orient or relocate the receiving antenna ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Industry Canada Compliance Statement 23 Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The use of shielded cables for connection of the monitor to the graphics card is required to ensure compliance with FCC regulations Changes or modifications tothis unit not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Complies with FCC 15 107 15 109 15 111 and 15 117 For further compliance information Advanced Micro Devices Inc 62 Forest Street Marlborough MA 01752 USA Tel 508 505 3900 Industry Canada Co
3. installing Wait 20 50 minutes to make sure the software has finished installing and then restart the computer ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Troubleshooting ATI CrossFireX 19 Troubleshooting ATI CrossFireX The following are suggested solutions for common ATI CrossFireX troubleshooting issues Change Motherboard BIOS Settings Some motherboards may have a system BIOS option to switch between single and dual PCIe slot support The default setting may be single slot support Refer to the motherboard s manual for information to enable dual PCIe slot support For more information see the ATI CrossFireX Web page at ati amd com crossfire Use Graphics Cards with Different Amounts of Memory In some ATI CrossFireX configurations graphics cards with different amounts of memory can by used however restarting your computer is required after enabling ATI CrossFireX This will cause ATI CrossFireX to reduce the amount of memory on the card with the most amount of memory to match the memory size of the graphics card with the least amount of memory Clicking OK to the memory mismatch error message will restart your computer Note When disabling ATI CrossFireX you will be given the option to restart your computer to restore the original graphics memory size or continue with the reduced memory size Card Reversal Recommended A recommendation message to reverse the graphics card positions may appear if the
4. AMDA Smarter Choice ATI Radeon HD 4300 Series User Guide Part Number 137 41588 10 Rev B 2008 Advanced Micro Devices Inc All rights reserved The contents of this document are provided in connection with Advanced Micro Devices Inc AMD products AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to discontinue or make changes to products specifications product descriptions and documentation at any time without notice No license whether express implied arising by estoppel or otherwise to any intellectual property rights is granted by this publication Except as set forth in AMD s Standard Terms and Conditions of Sale AMD assumes no liability whatsoever and disclaims any express or implied warranty relating to its products including but not limited to the implied warranty of merchantability fitness for a particular purpose or infringement of any intellectual property right AMD s products are not designed intended authorized or warranted for use as components in systems intended for surgical implant into the body or in other applications intended to support or sustain life or in any other application in which the failure of AMD s product could create a situation where personal injury death or severe property or environmental damage may occur Trademarks AMD and the AMD Arrow logo and combinations thereof ATI the
5. Care for ATI products at ati amd com The graphics card doesn t fit any of the motherboard slots The graphics card needs to be exchanged for one with a bus that matches the motherboard The computer beeps and the boot process stops Make certain that the graphics card is properly connected to the internal power supply and the motherboard No display on power up Possible SBIOS issue Replace old card and then try these possible solutions 1 Check motherboard manufacturer Web site for SBIOS update 2 Turn off the on board video The computer does not boot up properly Verify that the installation instructions were followed correctly Make certain that the graphics card is properly connected to the power supply and the motherboard If using Windows operating system restart your computer in Safe Mode For information on Safe Mode consult the Windows documentation Check the system configuration utility for interrupt assignments The computer boots up but there is no display Verify that the monitor is connected properly to the computer and a power supply If your motherboard has on board graphics capabilities you may need to disable them Consult your motherboard documentation for more information Note Some manufacturers do not allow the on board graphics to be disabled or to become the secondary display During software installation on a PC with the Windows Vista OS the screen goes blank The software is still
6. Center desktop shortcut Predefined Hot Keys You can define your own hot key sequence by using the ATI Catalyst Control Center Hotkey Manager Accessing ATI Catalyst Control Center Help ATI Catalyst Control Center Help provides information on the features and concepts of your ATI Radeon graphics card You can also use the ATI Catalyst Control Center Help feature to access usage information generate a problem report and get software version information for your graphics card 1 Open ATI Catalyst Control Center in the Advanced view 2 Choose one of the following options Press the F1 key at any time to get specific help on the currently displayed information gt From the ATI Catalyst Control Center Dashboard choose Help Help Contents to browse the entire help contents gt From the ATI Catalyst Control Center Dashboard choose Help gt Search Help to search the help contents for a specific term 9 To access AMD s Web site from the ATI Catalyst Control Center Dashboard choose Help Go to ATI com Searching the Help l Click Help in the Dashboard 2 Click Search Help 3 Enter the word s you wish to search for the in search box of the ATI Catalyst Control Center Help 4 Click Go 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 18 Reference Troubleshooting Graphics Card Installation Troubleshooting For more advanced troubleshooting information contact AMD Customer
7. Devices Inc ATI Radeon HD 4300 Series 12 ATI CrossFireXTM Technology 2 Unplug the computer power cord and disconnect the monitor cable from the back panel of the computer To avoid possible damage to the motherboard wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard 3 Remove the computer cover If necessary consult the computer manual for help removing the cover Remember to discharge your body s static electricity by touching the power supply case or the metal surface of the computer chassis 4 Remove any unneeded graphics cards from the computer Warning Some graphics cards can get hot while operating Wait approximately five minutes after turning off the computer before touching the card 5 Locate the PCIe slots on the motherboard If necessary remove the corresponding back panel cover 6 Align the new graphics card in the secondary PCIe slot next to the existing graphics card and press firmly until the card is fully seated 9 Ifusing a 3 card configuration align the third graphics card in the third PCIe slot next to the existing graphics card and press firmly until the card is fully seated ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Figure 2 1 ATI CrossFireX Installation 7 Fasten the graphics cards securely to the back panel 8 Make sure the cables are
8. Inc Chapter 2 ATI CrossFirex Technology ATI CrossFireX Introduction ATI CrossFireX technology harnesses two or more GPUs graphics processing units to be used in a single computer to run up to 2 displays creating a high performance gaming platform Typically setup involves 2 or more graphics cards but with the appropriate motherboard the technology can use a single card and the built in GPU of the motherboard ATI CrossFireX works with all 3D games and applications Note The ATI Catalyst Control Center software contains a different ATI CrossFireX user interface for each configuration type and automatically loads the appropriate one when a valid ATI CrossFireX configuration is detected in the system If ATI Catalyst A I is enabled in the ATI Catalyst Control Center software the optimal rendering mode available for the application is automatically selected Installing ATI CrossFireX Graphics Cards These instructions assume that a PCIe graphics card has already been successfully installed in the secondary slot slot one and that the primary slot slot zero is empty Note Consult your system builder or OEM to ensure that your system has an adequate power supply For more information see System Requirements For an up to date listing of ATI CrossFireX certified motherboards see ati amd com products certification l Make sure the computer monitor and other peripheral devices are off 2008 Advanced Micro
9. MD Customer Care is unable to assist with refunds returns or exchange specific inquiries If resolving the problem being experienced is critical to your decision to keep the product it is your responsibility to ensure that you know and are within the period of time your reseller will allow for refunds returns or exchange AMD is not responsible for any expense incurred accessing Customer Care It is expected that customers will review the expense associated with the available support options and will choose the method that best meets their needs and budget AMD Customer Care reserves the right to limit support options for products that are not registered or are reaching end of life International Compliance Information This section details the worldwide compliance information for this product which is manufactured to be compliant in the regions where it is sold Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC Compliance Information This product complies with FCC Rules Part 15 Operation is subject to the following conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits designed to provide reasonable protection against harmful interference in
10. Restart the computer with only the CRT monitor connected Customer Care For detailed instructions on how to use your product refer to the documentation included on the installation CD To activate Customer Care you must register your product at ati amd com online registration If you require further assistance with your product the following Customer Care options are available Friday 9 00 a m to 3 00 p m Note AMD reserves the right to change hours of support For more information please refer to ati amd com support terms Service Availability Language Access Online or mail 24 hours a day English http ati amd com support French Spanish mE Attention Customer Care Advanced Micro Devices Inc 1 Commerce Valley Drive East Markham Ontario Canada L3T 7X6 Telephone Monday to Thursday 9 00 a m to English 1 877 284 1566 toll free US amp Canada 5 50 p m or 1 905 882 2626 Canada IDternational and or local toll charges to Canada will apply AMD Customer Care for Graphics Products will work to resolve your issue and help you to get your product up and running If your issue is not resolved our technicians will determine whether the difficulty you are experiencing is the 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 22 Reference result of the product whether your product contains a defect and whether your product is under warranty A
11. S SG 0S AXIS SSE 7 71 BA SH ASIA AFSST AS SACE SH SE XI Soi A APS SY gt USU Class B Equipment Household purpose info telecommunications equipment As this equipment has undergone EMC registration for household purpose this product can be used in any area including residential area ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc BSMI Certification Information 25 BSMI Certification Information CNS 13438 C6357 BA MAR 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 26 Reference ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc
12. a Follow these steps to uninstall the existing graphics card driver in preparation for installation of a new card 1 With the current graphics card still in the computer close all open applications 2 Click Start Control Panel 3 Double click Hardware and Sound and then double click Device Manager 4 Expand Display Adapter and then right click the driver for the graphics card you are replacing 5 Inthe shortcut menu that appears click Uninstall The driver for the old graphics card is uninstalled 6 Turn off the system Installing the Graphics Card Note Make sure that your system has an adequate power supply l Make sure the computer monitor and other peripheral devices are off 2 Unplug the computer power cord and disconnect the monitor cable from the back panel of the computer To avoid possible damage to the motherboard wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard 3 Remove the computer cover Remember to discharge your body s static electricity by touching the power supply case or the metal surface of the computer chassis Tip If necessary consult the computer manual for help removing the cover 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 4 Installation 4 Remove any existing graphics cards from the computer Warning Some graphics cards can get hot while operating Wait
13. all ATI Avivo video converter software included in the custom install Insert the Software and Documentation CD Note If the install wizard does not start navigate to the CD drive and double click ATISETUP exe From the menu that appears click Software Install Follow the on screen instructions When prompted select either Express or Custom Not all software components are installed using the Express installation Custom installation allows you to select individual software components for installation Tip Ifthe installer fails to install the driver or you have a software conflict you can download the latest software from ati amd com support driver html and then install it 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 6 Installation Display Configuration This section describes how to configure the display and lists the available display connections Configure the Display Optional If you are not experiencing any troubles with the display no adjustments are necessary l ATI Radeon HD 4300 Series Right click on the desktop and in the shortcut that appears click Properties The dialog appears Click the Settings tab and then select the screen resolution and color depth that best suit your requirements and the display s performance Click Advanced and then select the Monitor tab Choose a refresh rate from the drop down list Choosing a refresh rate u
14. and then install the new drivers and software 5 Restart the computer 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 2 Installation Record the Serial and Part Numbers Write down the serial number and part number before installing The serial number and 102 part number on the graphics card are required for registration and free support They are located on a sticker on the back of the card The emphasized numbers in bold are required for registration and free support Figure 1 1 Sample Serial and Part Numbers S N P N 1028360100 Uninstalling the Old Driver Windows XP Follow these steps to uninstall the existing graphics card driver in preparation for installation of a new card 1 with the current graphics card still in the computer close all open applications 2 On the Windows taskbar click Start Control Panel and then double click Add or Remove Programs 3 Select the current graphics card driver and then click Add Remove The wizard will appear and help remove the current display drivers 4 Turn off the system after the driver has been removed Note If the previously installed graphics card has any additional software installed this software may also need to be removed before restarting the computer For example DVD Player or Multimedia applications ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc First Card for this PC 3 Uninstalling the Old Driver Windows Vist
15. approximately five minutes after turning off the computer before touching the card 5 Locate the appropriate bus slot on the motherboard If necessary remove the corresponding back panel cover 6 Align the new graphics card in the bus slot and press firmly until the card is fully seated Figure 1 2 Graphics Card Installation 7 Fasten the graphics card securely to the back panel 8 Make sure the cables are not interfering with anything inside the computer for example a cooling fan and then replace the computer cover 9 Reconnect any cables you have disconnected and plug in the computer power cord ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc 10 First Card for this PC 5 Turn on the monitor and then the computer The computer should start normally and the software must be installed next Installing the ATI Catalyst Software Suite Windows OS To install or remove software you must have administrator rights or be logged on as a user with administrator rights Note The installation dialog displays in English if the operating system s language is not supported Software is provided to both operate and take advantage of all the features of the graphics card Software includes l The graphics card drivers ATI Catalyst Control Center software HydraVision software included in the custom install SurroundView software included in the custom inst
16. ides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as is practical ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Contents Installations ous ae ees vegas EURO E e aD IRI wa RCM ed dro Ba aa 1 Installation Overview lt i462 ses ve dan Ra AA ted RR lee a EE n 1 Replacing an Existing Care 2e lei eo asser ceti eve opu bios RC e OR emi rien te er 1 First Cardo rtis DG ict citi cirie ime Mp tei yde rn Hm red ti o edle Tere 1 Record the Serial and Part Numbers 2 Uninstalling the Old Driver Windows XP 2 Uninstalling the Old Driver Windows Vista 3 Installing the Graphics Card 3 Installing the ATI Catalyst Software Suite Windows OS 5 Display Configuration one ev obe eA oio p ble De a ww ba tte i etg 6 Configure the Display Optional ss essensen Ree 6 uincere IUE 7 Display Adapters Optional Accessories ies o uec er eco tamen uti t e Dee eios 7 Supported Display Connections cedro ed exei i esc ra d cte cr Matra dit e tre nt 8 ATI CrossFireX Technology 11 ATI CrossFireX Introduction 11 In
17. ilable on the graphics card 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 8 Installation DVI to VGA DVI to HDMI DVI to YPrPb for a component cable connection to a LCD or plasma TV 7 pin S Video cable for video signals 7 pin HDTV output cable Supported Display Connections The graphics card provides hardware support for DVI I monitors and HDMI HDTVs using a DVI to HDMI adapter It also provides TV output via the S Video connection in composite S Video and component TV formats ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Supported Display Connections 9 Table 1 1 Display Configurations CRT analog display VGA connection DVI I to VGA adapter LCD display DVI I connection and DVI cable DVI I connection and DVI I to VGA adapter TV DVI connection and DVI to HDTV adapter and component cables S Video connection and S Video cable S Video connection and 7 Pin HDTV component cables HDTV display DVI connection and DVI cable DVI connection and DVI to HDTV adapter and RCA cables S Video connection and 7 Pin HDTV component cables S Video connection and S Video cable HDMI HDTV DVI connection and DVI to HDMI adapter and HDMI cable 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 10 Installation ATI Radeon HD 4300 Series 2008 Advanced Micro Devices
18. lified view of the features that includes wizards to quickly make changes Advanced View A powerful interface that enables complete configuration of the feature set of the graphics card Custom View A customized view so that desired features can be accessed quickly For information on the individual features of the software access the comprehensive in program help system see Accessing ATI Catalyst Control Center Help or visit the AMD Customer Care Web site at ati amd com support Starting the ATI Catalyst Control Center Software The following table shows the ways you can start the ATI Catalyst Control Center software ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Accessing ATI Catalyst Control Center Help Table 3 1 ATI Catalyst Control Center Access Routes Access Route Instructions Windows Desktop 1 Right click anywhere on the desktop 2 Fromthe shortcut menu that appears click ATI CATALYST TM Control Center Click Start on the Windows task bar Windows Start Menu 1 2 Select All Programs Catalyst Control Center Windows System 1 Right click the ATI icon in the Windows System Tray Tray 2 From the short menu select ATI Catalyst Control Center Desktop Shortcut When you first installed the ATI Catalyst Control Center the setup wizard provided you with the option of placing a shortcut on the desktop If you chose this option you can double click the ATI Catalyst Control
19. lyst Control Center ATI CrossFireX Disabled After Swapping Moving Cards If you change the ATI CrossFireX configuration by moving the graphics cards to different slots on the motherboard disable ATI CrossFireX and restore factory default settings in ATI Catalyst Control Center first Once the cards have been swapped enable ATI CrossFireX This ensures the new configuration is detected by the computer HDTV HDTV Adapter Troubleshooting The following troubleshooting tips may help if you experience problems with HDTV More troubleshooting information can be found on the AMD Web site Please visit ati amd com and select Customer Care The colors on the TV display are incorrect Ensure thatthe connections between the component video adapter and the HDTV are correct There is no display on the TV The TV will not display anything until Windows starts this may take several minutes Make sure the TV is set to YPbPr input Also make sure that the HDTV component video adapter is properly connected DVDs will not play in high quality modes Copy protected DVDs restrict playback to 480i and 480p modes ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc The entire display is not visible HDTV HDTV Adapter Troubleshooting 21 If the component input device supports it try 720p mode The display appears tilted Consult the HDTV documentation The CRT display is green The system is in component output mode
20. mpliance Statement This Class B digital apparatus complies with Canadian ICES 005 and with BETS 7 Section 3 6 Cet appareil num rique de la Classe B est conforme la norme NMB 005 du Canada et NTMR 7 Section 3 6 CE Compliance Information EMC Directive 2004 108 EC CISPR 22 2006 EN 55022 2006 Class B Limits and methods of measurement of radio disturbance characteristics of Information Technology Equipment CISPR 24 1997 EN 55024 1998 Information Technology Equipment Immunity Characteristics Limits and Methods of Measurements Electrical Safety Europe The Low Voltage Directive 2006 95 EC e EN 60950 1 Safety of Information Technology Equipment USA Canada UL 60950 1 Information Technology Equipment Safety Part 1 General Requirements e CSA C222 No 60950 1 Information Technology Equipment Safety Part 1 General Requirements 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 24 Reference To meet UL safety requirements the computer s maximum room temperature should not exceed 40 C TOT LISTED LEE ACCESSORI INS Eun Waste Electrical and Electronic Equipment WEEE Directive Compliance VCCI Class B ITE Compliance Information CORB MHLBKEFRERRERTRMHBMS VCC OB CHOC VIABMRRHRETT CORB XEWmRRCSERTOSCC EEMELTUWETH CORES VA PILEV 3 gt REMI VEL fHanat BABB FROTCEPHVET WIR RNA ICH TEL RURAL RA MIC Certification Information BEJAOFI S SSSA 77 9 PE F
21. not interfering with anything inside the computer for example a cooling fan and then replace the computer cover 9 Reconnect any cables you have disconnected and plug in the computer power cord 10 Turn on the monitor and then the computer You now need to enable ATI CrossFireX in ATI Catalyst Control Center Enabling ATI CrossFireX 1 From the Graphics Settings tree click CrossFire 2 From the Graphics Adapter list select the graphics card that acts as the Master VPU 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 14 ATI CrossFireXTM Technology 3 Select the Enable CrossFire check box 4 If your system has more than two ATI CrossFireX capable graphics cards the dialog appears where you must select the graphics card that will partner with the Master GPU Note Enabling ATI CrossFireX for the selected graphics card automatically disables GPU Accelerated Physics for that same card ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Chapter 3 Reference The following section offers troubleshooting tips and provides customer care warranty and compliance information System Requirements Hardware Minimum requirements are Motherboard with one PCIe x16 lane graphics slot AMD Athlon or Intel Pentium 4 CPU 1GB RAM CD ROM or DVD ROM drive for installing software A 400 watt or better power supply Certified power supplies are strongly recommended fo
22. nsupported by the display may damage it Consult the display s documentation if necessary Click OK Once you have configured the main display you can configure any other displays that are connected To configure another display do the following a Right click on the desktop and in the shortcut that appears click Properties Note The ATI Catalyst Control Center software can also enable and configure multiple monitors b To access the basic multi monitor configuration settings click the Settings tab C Select the monitor icon identified by the number 2 Note When using multiple monitors with the graphics card one monitor will always be the primary display additional monitors will be designated as secondary d Click Extend my Windows desktop onto this monitor e Set the Screen Resolution and Color Quality as appropriate for the second monitor 2008 Advanced Micro Devices Inc Connections 7 f Click OK Connections The following figure shows the possible connection types on the ATI Radeon graphics card Available connections may vary between models of this series graphics card Figure 1 3 ATI Radeon Connections 1 DVI I Dual Link connection 2 S Video connection 7 pin 3 VGA connection Display Adapters Optional Accessories The following illustrates the adapters you can use to connect the graphics card to other display devices not directly supported by the connection types ava
23. primary graphics card is not installed into the primary PCIe slot Although ATI CrossFireX can be enabled performance may be improved by reversing the graphics cards in the computer See your motherboard s manual to determine which is the primary PCIe slot 3D Client is Active You will not be able to start ATI CrossFireX if a 3D application game or video playback such as a DVD movie is running Close all open 3D applications games and movie player applications and then enable ATI CrossFireX ATI CrossFireX is Currently Unavailable This error has occurred because ATI CrossFireX did not correctly detect your graphics hardware or there is a problem with the software Check that the graphics cards are installed correctly 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 20 Reference Check that the interconnect cable is installed correctly Close all running 3D applications Re install the ATI Catalyst Control Center and drivers Screen Rotation is Unavailable or Does Not Work Screen rotation is not an available feature on ATI CrossFireX systems Video Displays Flicker During System Startup This is normal during ATI CrossFireX start up ATI CrossFireX Starts in Software Mode This is normal when starting up for the first time after installing two ATI CrossFireX graphics cards if neither card is installed in the primary PCI Express slot You can change the ATI CrossFireX mode in the ATI Cata
24. r a list of certified power supplies see ati amd com certifiedpsu ATI CrossFireX Requirements Minimum requirements for ATI CrossFireX configuration using the ATI Radeon HD 4300 Series graphics card ATI CrossFireX certified motherboard For an up to date listing of ATI CrossFireX certified motherboards see ati amd com products certification 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series 16 Reference Asecond ATI CrossFireX graphics card compatible with the ATI Radeon HD 4300 Series In most cases a third card and fourth card may be installed if desired For two card setup a PCIe 475 watt or higher power supply For three card setup a PCIe 525 watt or higher power supply For four card setup a PCIe 600 watt or higher power supply For an up to date listing of certified power supplies see ati amd com certifiedpsu Certified system cases with good airflow and cooling are recommended For list of certified cases see ati amd com certifiedcases Using ATI Catalyst Control Center ATI Catalyst Control Center Overview The ATI Catalyst Control Center software provides access to the display features of the graphics card Use the software to fine tune graphics settings enable or disable connected display devices and change the orientation of the desktop Many features display previews of the changes before they are applied The following configurations are available Basic View A simp
25. sooo es teu Sin deli wed ond athe Bnd tla ptite ina rie a Ma vs dris ultri 23 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series vi Waste Electrical and Electronic Equipment WEEE Directive Compliance 24 VCCI Class B ITE Compliance Information 24 MIC Certification Information cos ect de Ev RS Or PL cba ad ra 24 BSMI Certification Information ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Chapter 1 Installation For support you will need to record the serial number and the part number for the card before installation Installation Overview The installation of the card has slightly different procedures depending on whether you are replacing an existing card or installing a graphics card in a PC for the first time This section briefly describes the high level steps for both cases Replacing an Existing Card If you are replacing an existing graphics card you need to Start the computer and then uninstall the old graphics driver Turn off the computer and then remove the old card Install the new card and then connect the monitor Start the computer and then install the new drivers and software oF WN N F Restart the computer First Card for this PC If this is the first graphics card for this PC you need to 1 With the computer off install the new card and then connect the monitor 2 Start the computer
26. stalling ATI CrossFireX Graphics Cards 11 Enabling ATECEOSSFIFeX dpud Chea ay CK NEN ERR AM be EOE uat e tutus 13 Relerence ud eka baz n tao 15 System Requirements 4 444 04 15 ROCHE CARCERE Le Maden OR D P O RIE us 15 ATI CrossFireX Retirerfietite 540 droit had SEE aera LE ae abl ARIA I 15 Using ATI Catalyst Control Center 16 ATI Catalyst Control Center Overview AR er pr Nes et Tr EDDA ns 16 Starting the ATI Catalyst Control Center Software 16 Accessing ATI Catalyst Control Center Help isses e Ere hr a eda 17 Searching te Pelis La zoserbeedub sceau tt uh Ro ER pP EO nanan wend PER ID AD ane 17 Troubleshooting ss seh ue atas odd etre carae qd DI era up noze teta RM d a M 18 Graphics Card Installation Troubleshooting 18 Troubleshooting ATI CrossFireX Rens de aspi dette wars ripeta 19 HDTV HDTV Adapter Troubleshooting s 5644 dci ec ete ree Lei tape dass 09 20 Customer Caress PP PIE 21 International Compliance Information 22 FCC Compliance Information eee rid tn te id e tee tob eo eet aedes 22 Industry Canada Compliance Statement 23 CE Compliance Information o cas S Sat ily ci aep ded ie ecd il ep 23 Electrical Saet
27. tightened in order to provide continuous bonding between the product and the PC chassis as appropriate For cards with TV tuners Ground outdoor antenna appropriately Since an outdoor antenna or cable system may be connected to the product be sure that the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 and the Canadian Electrical Code Section 54 provide useful information Unplug system during storms or prolonged disuse For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will help prevent damage to the product from power line surges Install outdoor antenna system away from power lines Warning When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal An outside antenna system should not be located in the vicinity of overhead power lines or other light or power circuits or where it can fall into such power lines or circuits 2008 Advanced Micro Devices Inc ATI Radeon HD 4300 Series Note to CATV System Installer This reminder is provided to call the CATV systems installer s attention to Section 820 40 of the NEC which prov
28. umentation described herein for any act or omission of AMD concerning such products orthis documentation for any interruption of service loss or interruption of business loss of anticipatory profits or for punitive incidental or consequential damages in connection with the furnishing performance or use of the AMD hardware software or other products and documentation provided herein Ensure that you have the latest documentation ATI Radeon HD 4300 Series 2008 Advanced Micro Devices Inc Important Safety Instructions Note This product is for use only with compatible UL listed personal computers that have installation instructions detailing user installation of this class of product Read all instructions before beginning installation All safety and installation instructions should be read before the product is installed or operated Retain all instructions Safety installation and operating instructions should be retained for future reference Heed all warnings All warnings regarding the product and its operating instructions should be obeyed Use appropriate grounding For continued protection against the risk of electric shock and fire install this accessory only in products equipped with a three wire grounding plug a plug having a third grounding pin This is a safety feature Do not remove the grounding pin of a three pin plug Attach product securely All product securing screws or fasteners should be completely
Download Pdf Manuals
Related Search