Home

Plantronics BackBeat 906

image

Contents

1. low tones volume button forward or backward when volume limit is reached of music Boost the Press and hold the play pause None Ascending tones when bass button for 2 seconds when activating Descending tones music is playing when deactivating NOTE To wirelessly stream stereo music or audio from a device to your headphones your Bluetooth device must support the Bluetooth Advanced Audio Distribution Profile A2DP profile To control music playback with your headphones your Bluetooth device must also support the Audio Video Remote Control Profile AVRCP The Bluetooth adaptor does not support the AVRCP profile so you must use the controls on your device to control music playback 13 Range Bluetooth wireless technology provides a way for devices to communicate with each other using short range radio frequency instead of wires Any two Bluetooth devices can communicate as long as they both have Bluetooth turned on they are within range and they have been paired To maintain a connection keep your headphones within 33 feet 10 meters of your Bluetooth phone or adaptor Ensure that your mobile phone is located on the left side of your body and that there are no obstructions between it and your headphones If there are obstacles between your headphones and the phone or adaptor you may experience interference Audio quality degrades as you move out of range When you are far enough away to lose the connection you hear a high
2. sync between my headphones and my audio source Mute may be turned on See page 9 Your headphones are out of Bluetooth range 33 feet 10 meters Move closer to the Bluetooth device If your headphones do not automatically reconnect see page 5 Be sure your headphones are paired with the audio device See page 5 Ensure that your headphones are in play mode and then initiate play mode from your audio source My earbuds need to be cleaned Remove the earbuds from the headphones Wash the earbuds with warm soapy water and rinse thoroughly When the earbud are completely dry reattach them to your headphones See page 7 None of the above issues are the problem or my headphones still don t work Perform a system reset While plugging in the AC charger hold the power pair button The headphones will show a solid red or blue light when they have been successfully reset Troubleshooting with Bluetooth Adaptor Backseat 906 ony cannot hear music from my other audio source while the headset is also paired to my Bluetooth A2DP mobile phone If you connect your mobile phone to your headphones before connecting your Bluetooth adaptor to your headphones your mobile phone s A2DP Bluetooth profile may interfere with the functioning of the adaptor Additionally if you power off the adaptor or move out of Bluetooth range 33 feet 10 meters you may lose the connection to your headphones In either situation y
3. tone in the headphones The headphones attempt to reconnect for 30 seconds If reconnection is successful a low tone will be heard If you move back in range after 30 seconds have passed you can manually reconnect by pressing the call control button Troubleshooting My mobile phone did not locate the headphones Power off your mobile phone and headphones then power on your phone Repeat the pairing process on page 5 Audio quality is poor Make sure that the headphones fit your ears properly See page 7 Ensure that your mobile phone is located on the left side of your body and that there are no obstructions between it and your headphones Make sure that your headphones are within 33 feet 10 meters of your mobile phone Going outside of this range can impact audio quality If your headphones do not automatically reconnect see page 12 cannot hear stereo music from my phone For stereo listening your Bluetooth phone must support the Bluetooth Advanced Audio Distribution Profile A2DP which defines how Bluetooth devices stream stereo quality audio from one device to another See your phone s user manual to determine if it has this Bluetooth profile cannot control my music tracks The adaptor and some stereo Bluetooth phones do not support the AVRCP profile for track controls Use your audio device to change tracks 15 Troubleshooting Callers cannot hear me Play and Pause are out of
4. Innovation are trademarks or registered trademarks of Plantronics Inc Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG and any use by Plantronics is under license Patents Pending ATERT 81378 01 08 09 Oy a US go tiste
5. ZN PLANTRONICS SOUND INNOVATION Plantronics BackBeat 903 906 User Guide Welcome Thank you for purchasing the Plantronics BackBeat 903 906 headphones This guide contains instructions for setting up and using your new headphones A Before using this product please refer to the For Your Safety guide for important product safety and charging information Registering Your Product Visit the Customer Support area on www plantronics com productregistration to register your product online so we can provide you with the best service and technical support Getting Assistance The Plantronics Customer Support Team is ready to assist you You can find answers to frequently asked questions ask a question using e mail receive service over the Internet or speak directly with a representative Visit www plantronics com support or call 1 866 363 BLUE 2583 NOTE If you are considering returning this headset please contact the Customer Support Team first NOTE For pairing your headphones to your Bluetooth mobile phone your Passkey PIN code is 0000 Contents Package Contents and Features 2 Charging Your Headphones or Bluetooth Adaptor eee 4 Pairing Your Headphones Pairing Your Headphones and Phone Device Pairing Your Headphones and Bluetooth Adaptor Adjusting he Fils dresser nantes 7 Headphones Phone Controls and Indicators 9 8 Headphones Music Controls and Indicator
6. e eartip inside your ear using the telescoping swivel adjustments 3 Repeat step 2 with the other earpiece and continue to adjust the fit in either ear until both eartips rest comfortably and securely in your ears Adjusting the Fit Headphones Phone Controls and Indicators Action Indicator Light Tone Turn on the Press and hold the power Glows blue for 2 seconds 4 rising tones headphones pairing button for 2 seconds then turns off Turn off the Press and hold the power Glows red for 4 seconds 4 falling tones headphones pairing button for 4 seconds then turns off Answer end Tap the call control button 3 blue flashes repeating 3 low tones repeating a call while phone is ringing while phone is ringing Blue flash every 2 seconds Single low tone when while on a call call connects or disconnects Make a call Enter the number on your Blue flash every 2 seconds Brief tones phone and press send while call is in progress then ringing Reject a call Press and hold the call None Single long control button for 2 seconds low tone Headphones Phone Controls and Indicators Action Indicator Light Tone Check battery With headphones Red flashes Battery level None power powered on tap the il More than 2 3 full power pairing button 2 1 3 2 8 full The indicator flashes 3 Less than 1 3 full red to show the charge level Low battery None 3 red flashes every 10 seconds 3 high tones every 10 ind
7. icator seconds Mute unmute the Press in the volume None Low and high tone to call call in progress tracking mute button mute then a single low tone every minute High and low tone to unmute Headphones Phone Controls and Indicators Action Indicator Light Tone Perform a While plugging in the AC The headphones will show None system reset charger hold the power pair a solid red or blue light button when they have been successfully reset Adjust the call Tap the volume tracking None Brief low tone 2 low tones volume call in mute button forward when volume limit progress or backward is reached WARNING Do not use headphones at high volumes for an extended period of time Doing so can cause hearing loss Always listen at moderate levels See www plantronics com healthandsafety for more information on headphones and hearing Redial Double tap on call control None Double low tone button Voice dialing trying 2 second press on call None Single low tone to initiate call control button Headphones Phone Controls and Indicators Action Indicator Light Tone Transfer active call to from headset 2 second press on call control button when on an active call None Transfer call from headset to phone Double low tone Transfer call from phone to headset Single low tone followed by a double low tone Online indicator on off default on Missed call indication Press mu
8. luetooth range 33 feet 10 meters See page 12 Check the volume of the audio source device Adjust as necessary Adjust the volume control on the headphones See page 11 cannot make a VOIP call using the adaptor The adaptor is only intended for audio listening If your computer has the Bluetooth Headset HSP and Hands Free HFP profiles you can pair your headphones to your computer for telephony applications like VOIP Product Specifications Talk time Up to 7 hours Bluetooth HSP HFP Secure Simple profiles Pairing A2DP and AVRCP Listening time Up to 7 hours headphones Standby time Up to 7 days Power 5V DC 180 mA requirements Range Up to 33 feet 10 meters Storage 32 104 F 0 40 C Headphones 34 grams operating weight temperature Battery type Lithium ion polymer Charging 32 104 F 0 40 C temperature Charge time 3 hours for full charge Bluetooth version headphones 2 1 EDR Enhanced Data Rate Performance dependent on battery and may vary by device Audio quality degrades as you move out of range and is dependent upon the device with which the headphones are paired 19 20 A PLANTRONICS SOUND INNOVATION Plantronics Inc 345 Encinal Santa Cruz CA 95060 United States Tel 800 544 4660 www plantronics com 2009 Plantronics Inc All rights reserved Plantronics the Plantronics logo BackBeat OpenMic QuickPair and Sound
9. ou will need to 1 Disconnect but do not delete your headphones from your mobile phone s list of paired devices see your mobile phone s Bluetooth manager 2 Reconnect your headphones to your adaptor 3 Reconnect your headphones to your mobile phone see your phone s Bluetooth manager cannot tell if my Bluetooth adaptor is powered on When powered on the LED on the adaptor flashes blue every 5 seconds To power on the adaptor press and hold the power button for 2 seconds until the LED flashes blue cannot complete pairing with another Bluetooth device Your Bluetooth adaptor must be powered off when pairing a device to your headphones See page 5 17 Troubleshooting with Bluetooth Adaptor Backeeat 906 ony do not get sound from my headphones when using the Bluetooth adaptor Volume is too high low when listening to audio but fine when making a phone call It can take up to 30 seconds for the devices to connect and for audio to stream via Bluetooth After 30 seconds if there is still no sound press the play pause button on the headphones Ensure that your audio device is not locked see your device s user manual Ensure that you have properly paired the adaptor to your headphones See page 6 Check that the adaptor is plugged into an active stereo audio source Power off your headphones and adaptor and then power both of them on again Make sure you have not moved out of B
10. ratures below 0 C 82 F or above 40 C 104 F CHARGING TIME S NOUNS 2e p Full charge Minimum charge before first use Pairing Your Headphones and Phone Device Turn on your phone s or device s Bluetooth feature With the headphones powered off press and hold the Power Pairing button until the LED indicator flashes blue and red Use the phone or device menu to search for the Bluetooth headphones and select 9xxBackBeat See your phone s or device s user guide for more information If prompted enter 0000 for the PIN code passkey Some phones also require that you accept the connection Pairing is successful when the LED indicator flashes blue SETTINGS Bluetooth 9xxBackBeat SETTINGS Pairing Your Headphones and Bluetooth Adaptor eackeeat 906 only 1 With the headphones powered off press and hold the Power Pairing button until the LED Indicator flashes blue and red 2 With the adaptor powered off press and hold the Power Pairing button until the LED Indicator flashes blue and red 3 The headphones and adaptor will both rapidly flash blue when paired successfully Both are now ready for use For optimal sound performance and a secure comfortable fit the headphones should be adjusted to rest gently in your ear and around the back of your neck 1 Drape the stereo cable behind your neck 2 Guide one earpiece behind your ear and secure th
11. s 9 12 FRANCO ARE vcuasscaeeieesakccass sen etamsete E niet 14 Troubleshooting Troubleshooting with Bluetooth Adaptor Product SpecificatiQns sise 19 Package Contents and Features Left Earpiece Phone Controls Telescoping Swivel Fit Adjustment Call Control Button Answer End Ac Ch arger LED Indicator Charging Jack Micro USB Power Pairing Button Connector s St Cabl BackBeat 903 BackBeat 906 ereo Cable Right Earpiece Music Controls Telescoping Swivel Fit Adjustment Play Pause Bass Boost OpenMic Button Volume Tracking Mute Button Call Mute Volume Down Volume Up Track Back AA Track Fwd Right Eartip Package Contents and Features 3 5mm connector for headphone jack Power Pairing Button rawmowes 1 LED Indicator Bluetooth Adaptor included with BackBeat 906 only Charging Jack Charging Your Headphones or Bluetooth Adaptor BackBeat 906 shown 1 Plug the AC charger into a power outlet Connect the charger cable to the headphones or Bluetooth adaptor 3 Charge each for at least 1 hour before first time use or 3 hours to fully charge The LED indicator glows red while charging When fully charged LED will turn blue until unplugged Do not use your headphones or Bluetooth adaptor while they are connected to the charger NOTE Always charge at near room temperatures never charge battery at tempe
12. te and call control together when headset is on None Off 4 blue flashes then fade out On 4 blue flashes then fade in LED triple purple flash for 5 minutes Single low tone then double low tone None 11 Headphones Music Controls and Indicators Action Indicator Light Tone Play music Tap the play pause button None None OpenMic pause Tap the play pause button when None None to hear music is playing Disable While playing music press and None Low high low tones when OpenMic during hold the mute button for 3 seconds music pause OpenMic feature will not activate during next music pause Repeat action to enable OpenMic feature disabling High low high tones when enabling Move forward Press and hold the volume tracking None or back one mute button forward or backwards track for each track Single low tone for each track change Headphones Music Controls and Indicators Action Indicator Light Tone Answer a call Tap the call control button 3 blue flashes repeating 3 low tones repeating while while listening Music will pause during call while phone is ringing phone is ringing Single low to music Blue flash every 2 tone when call connects or seconds while on a call when disconnects Reject a call Press and hold the call None Single long low tone while listening control button for 2 seconds to music Adjust the Tap the volume tracking mute None Brief low tone 2

Download Pdf Manuals

image

Related Search

Related Contents

Guía del usuario del SGA  DW099 1-800-4-D W A L T • www .dewalt.com  Provision-ISR DAI-480IPE28 surveillance camera  Thank you for purchasing Spark Creative Drum Machine  PEFY-P20,25,32,40,50,63,71,80100125140  MANUAL DO UTILIZADOR  "user manual"  i-meter ™ MF12  anunciador vocal universal av51 - bra  HT2050 Digital Projector Home Cinema Series User Manual  

Copyright © All rights reserved.
Failed to retrieve file