Videocon VU325LDF 32" Full HD Black LCD TV
Contents
1. YEBHT Aea n e EAR LAI 2 HEM s MrEcwr im TEMS Hii Lt rea AAAMOOO OONAN fig 2 i 63 Please note that certain devices connected to the TV via SCART or HDMI connections will automatically switch to the correct input source and be displayed automatically on the TV screen when the external device is turned on When the device is turned off the TV will revert back to its original channel setting Y Connecting External Equipment to the TV Ta Te SRT SANT 1 CR OVE Plays CR OVD Player These figures are just for reference Das CO Player ANT IN To view television channels correctly a signal must be received by the set from one of the following sources An outdoor aerial A cable television network A satellite network COMPONENT IN Connect component video cables not supplied to component connector PR PB Y on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD The PR PB and Y connectors on your component devices DTV or DVD are sometimes labelled Y B Y and R Y or Y Cb and Cr Connect RCA audio cables optional to R AUDIO L on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD HDMI IN 1 HDMI IN 2 HDMI IN 3 Supports connections between HDMI connection enabled AV devices Set Top Boxes Blu Ray Player Games Console etc No additional Audio connection is needed for an HDMI to HDMI connect2. f o veain S Homa o Homi o HoM3 o 5 Basic Connection and Switching the TV On Basic TV Connection and Switching On Off KEY CONTROLS A 4 gt 0 1 Connect your aerial lead into the ANT IN socket on the rear of the TV see fig 2 A POWER KEY Gp GD Gn 0 Gs B 2 Connect the mains lead supplied into the TV B DIV MENU 000 and plug into an appropriate household socket C ARROW KEYS Use AC 100 240V power outlet for the TV D SOURCE KEY Ce power supply The apparatus must be connected o O to a mains outlet with a protected earthing E ENTER or OK KEY connection see fig 2 Q i T 3 The red standby light on the front of the TV will illuminate 4 Point the remote control at the front of the TV set and press the POWER key A fig 1 the blue power light illuminates on the front of the TV replacing the red standby light and the unit switches on You can also press the standby key on the side of the TV to turn on the unit from fig 1 standby see fig 2 Standby Mode Your TV can be placed into standby mode in order to reduce power consumption this is useful when you wish to interrupt viewing temporarily e Press the POWER key A on the remote control or the standby key on the TV set gt e The screen is turned off and a red standby indicator light replaces the blue power light on the front of the TV e To sw
3. If required slightly dampen the cloth with a drop of water to aid in removing stubborn marks on the cabinet For the screen we recommend the use of a specialist LCD screen cleaner which can be purchased from your local electrical dealer Don t display a still image on the screen for too long a period as this can cause an after image to remain on screen Despite the high quality of the television random disturbances or interference may cause occasional malfunctioning In this case the correct function of the TV can be restored by switching off the TV using the power button removing the mains plug then switching on the unit as soon as the LED light disappears 3 Initial Setup Before Starting Please note the following important points 1 Two people should lift or carry the TV 2 Ensure you have plenty of space to work in safely 3 A screw driver is required to fit the stand 4 When fitting the stand ensure that the area you lay the TV face down on is flat stable and cushioned to prevent damage to the screen 5 Carefully remove the TV and accessories from the box supplied in retain this and any packaging for 28 days before disposing of In the Box Standard Accessories 1 x LCD Television 2 x AAA Batteries Remote 1 x Stand Mount 4 x Stand Mount Screws 1 x Quick Start Guide 1 x Mains Cable 1 x User s Manual 1 x Remote Control If any of the above items are missing please consult your retailer or contac
4. P us menu 7 8 9 REMOTE CONTROL SENSOR aim the remote control at this spot on the TV VOLUME DOWN decrease the volume CHANNEL DOWN CH access previous TV channel SOURCE press to display on screen menu of TV s input sources enables you to select from TV SCART 1 2 S VIDEO Component VGA HDMI 1 3 DTV These figures are just for reference Operating Controls and Connections Operating Controls Names and Functions Rear Connections 10 ACINPUT TERMINAL 11 SCART 1 SCART 2 12 SIDE CONNECTION PANEL see fig 2 expanded 13 AUDIO IN L2 For Component LEFT 14 AUDIO IN R2 For Component RIGHT 15 AUDIO IN R1 For Video S Video RIGHT 16 Pr Cr Component In 17 AUDIO IN L1 For Video S Video LEFT 18 Pr Cb Component In gt Component In 19 Video In Composite 20 Y Component In 21 S Video In 22 Cl Slot common interface 23 ANT In Antenna Input Terminal 24 VGA Audio In PC Sound 25 VGA In D sub 15pin 26 HDMI 1 HDMI 2 HDMI 3 Connections These figures are just for reference Connections where external products would typically connect o can be connected Set top box DVD Player DVD Recorder Blu Ray SKY HD Digital Camera lt o CART 1 RGB CART 2 OMPONENT IN IDEO IN VIDEO IN GA IN DMI 1 DMI 2 DMI 3 ll set top box ovo Player SCART1 RGB o o o SCART2_ o o o COMPONENTIN o voeon fJ o f f SVIDEOIN
5. automatically to the tuner s memory bird 7 This process will take a few minutes to complete ALL When finished the TV Auto Program banner will disappear and the TV will display a normal TV picture AN ENGLAND usually BBC 1 The TV is now ready to display all tuto Sea hhh Sn available analogue TV broadcasts VESTIT 743 30 MHz 8 Provided the broadcast signal is strong enough the E EA TV will automatically place all TV channels in the correct order and label the channels BBC1 BBC2 Auto Program ITV CH4 CH5 If the signal is weak then channels Searching aM 5 may not be named and may be stored on the wrong Program 8 CH4 Hz program position If this is the case follow the CEN instructions on the next page 3 Analogue TV Tuning First Installation First Installation ANALOGUE STANDARD TV CHANNEL SORTING If after auto tuning the TV Channels received are stored in an incorrect order you will need to manually sort them into the correct program position Please follow the steps below You should already be in the TV Tuner mode following on from the previous page i 10 Press the ATV MENU key F the ATV Menu appears on screen displaying the Video menu Use the right ARROW key C to highlight the Search menu icon see fig 2 Press the down YW ARROW key C repeatedly to highlight the Program Edit option and press the right ARROW gt key C to access Note that this option
6. display Do not allow anyone to pull push or climb on the TV this may cause the product to fall In particular ensure children do not hang over or destabilize the TV doing so may cause the TV to tip over causing serious injuries or death Power lead cautions Use only the mains lead supplied with the TV Contact your local dealer for a replacement if required The TV must be connected to a mains socket having a protected earth connection The mains socket must be installed by a qualified electrician If the earthing on the socket is not provided then there is a possibility of electrical shock Do not connect earthing to water pipes gas pipes telephone lines or lightening rods Do not place the AC main cord under the TV or other heavy item this could lead to fire or electric shock hazard Warnings and Safety Precautions Do not allow anything to rest upon or roll over the power cord and do not place the TV where the power cord is subject to damage or left trailing in a position that could cause someone to trip leading to injury and or damage to the product Remove the AC plug from the wall outlet when the TV is not in use for a prolonged period of time and before going to bed Ensure that the mains plug is easily accessible at all times The power switch on this model does not fully disconnect the TV from the mains supply unplug to fully switch off and save electricity Unplug the TV in the event of a thund
7. gt 0 1 2 99 199 Select the matching colour key to select the edit option Press Enter to confirm Favourite Program gt 0 1 2 7 Favourite program parameter is used for arranging the favourite program Press FAV key repeatedly on the Remote to access all favourite programs stored one after another 0Oto9 Program Label is used to assign a label to a program channel e g BBC 1 Program Label gt AtoZ Press the ARROW keys on the remote control to move the cursor or change the letters Once finished press the ATV MENU key to confirm your choice Menu Operation ATV MENU LIST Continued TIME MENU 00 00 to 23 59 This setting displays the time set by user as a Current Time Off Time On Time On Program Reminder Channel Reminder Time Auto Sleep Blue Screen Keypad Lock OSD Transparent TTX Language BackLight Sis This parameter is used to adjust the brightness level of panel 00 00 to 23 59 00 00 to 23 59 0 to 199 0 to 199 00 00 to 23 59 0 10 20 30 60 90 120 180 240 Minutes English French German Spanish Italian Russian Greek Portugese Polish Romanian Hungarian Bulgarian Czech Serbian This parameter used to switch the TV set into standby at time preset by the user NOTE Off Time is deactivated when set is switch to standby or mains power supply is switched off These parameters are used to switch the TV set On from standby at a preset time and preset program ch
8. is not viewable until you scroll down past the bottom of the initial Search menu screen The Program Edit menu appears see fig 3 Use the ARROW keys C to highlight the channel you wish to move to another position and press the ENTER OK key E on the remote control As per the yellow Move prompt on screen see fig 3 press the YELLOW Fastext key the channel you wish to move will be highlighted yellow Use the ARROW keys C to move the highlighted channel to the desired program position you wish to store it on see fig 3 In our example BBC1 is on program position 5 By pressing the left ARROW key C once and the down ARROW YW key C once it has now been moved to program position 1 see fig 4 Press the ENTER OK key E to store the channel in the position selected the highlight changes to orange Copy steps 4 8 for all other channels you wish to move When finished Press the ATV MENU key F a couple of times to exit from the menu You have now successfully sorted all of the channels stored in your preferred order As well as the Move option you can use the Program Edit menu to Copy a stored channel and Delete a stored channel these commands are accessed with the colour FASTEXT keys H using the same process as above however using the RED FASTEXT key H to delete a selected program and GREEN to copy KEY CONTROLS A A PO
9. see fig 3 Configurati Parental control Hotel Mode 5 Use the down W ARROW key C to highlight Configuration and press the ENTER OK key E 6 On the following menu use the down WY ARROW System Parameters key C to highlight System Parameters and press the ENTER OK key E 7 On the following menu use the ARROW keys C to Software Upgrade select Factory Settings and press ENTER OK E T A SUNA ae see fig 4 8 You will be asked to confirm the operation press the ENTER OK key E see fig 5 this will delete all AU lation confirmation current DTV Tuner settings and re initialise the TV which will automatically go into First Installation j ALL privat tti d oth auto tuning mode after a few moments Brivaisaer ib ge ana other user data Do you want to proceed 9 Please select United Kingdom with the ENTER OK key E and the TV will start tuning all digital TV stations and should put them in the correct usual order If you are still having problems call our service number below fig 5 Analogue TV Tuning First Installation First Installation Remote Control Unit Ensure that the remote control is in KEY CONTROLS A TV mode press the TV key G fig 1 the remote will now Gp GD Gn operate the TV OO y A POWER KEY ED Gp UY With the TV connected and switched on as described B DTV MENU Gs Gs B previously follow the steps below to tune your TV int
10. to adjust the low frequency level of sound output This parameter is used for automatic volume cont aes Volume Level If it is ON then sound volume level is adjusted automatically In case of distorted audio due to high audio modulation index turn Auto Volume Control On SEARCH MENU Program 19 10 1 199 These parameters indicate current program number jadi This setting is necessary if picture is not reproduced correctly Auto is the best Color System gt PAL SECAM setting however select PAL for UK TV signals BG I DK L U This setting is necessary if sound is not reproduced correctly for the UK OTHERS AUSTRIA BELGIUM INDIA CROATIA CZECH DENMARK FINLAND FRANCE GERMANY GREECE Country gt HUNGARY ITLAY LUXEMBOURG Select the country as per your requirement NETHERLAND NORWAY POLAND By selecting Country TV set will automatically adjust colour and sound system PORTUGAL SLOVENIA SPAIN corresponding to that country automatically SWEDEN SWITZERLAND TURKEY ENGLAND RUSSIA SAUDI ARABIA Auto Search This is Auto Searching Mode that will tune all channels available automatically Manual Search This parameter is used to tune in channels manually in case new channel is broadcast not already stored in Auto Search Fine Be This parameters allow you to fine tune channel manually in case of weak signal This parameter is used for sorting of program position Copy Delete Skip Move P E 1 2 Je 1 rogramiedtt
11. 000 Hours minimum Colour System PAL SECAM BG I L L DK NTSC 3 58 amp 4 43 only for AV inputs VHF 2 12 Channel coverage UHF 21 69 CATV X Z 2 S1 S41 100 240 V 50 60 Hz 75 Ohms unbalanced 2 X 10 W 1W RMS This receiver supports only free to air channels Accessories Remote handset User Guide book Power cord THE COMPANY RESERVES THE RIGHT TO BRING TECHNOLOGICAL AESTHETICAL AND DIMENSIONAL CHANGES FOR PRODUCT IMPROVEMENT OR FOR MANUFACTURING NEEDS WITHOUT NOTICE Warnings and Safety Precautions Do not remove the rear cover do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions leading to serious injury or death Request a qualified agent to perform servicing Do not expose TV to direct sunlight or other heat sources to prevent fire never place any type of candle or naked flame on the top or near to the TV set Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers Do not expose to rain or moisture do not use the product near water such as a bathtub washbasin kitchen sink laundry tub swimming pool or in a wet basement Do not place vases or any other water filled containers on this product The water may spill onto the product causing fire or electric shock leading to serious injury or death Do not block ventilation openings adequate
12. Stored in an Incorrect Program Position KEY CONTROLS A If after initial DTV Tuning is complete channels are stored in an unusual or incorrect order e g BBC1 on program 7 or certain channels seem to be missing from the usual free to A POWER KEY air line up you may need to initiate first installation again B DTV MENU C ARROW KEYS TE T obblio To do this you will need to perform a Factory Reset on the DTV Tuner memory All DTV Tuner data will be erased D SOURCE KEY Ce doesn t affect analogue tuning memory and you will be E ENTER or OK KEY prompted to start the First Installation process for a om second time This should resolve the problem Follow the instructions below T Factory Reset the DTV Tuner TV 1 The TV should already be in DTV mode if it is skip to step 4 If not follow he next steps and continue Es SCART2 2 Press the SOURCE key D on the remote control S Video the source input menu appears on screen fig 2 YPbPr fig 1 this will only remain on screen for a few seconds for VGA you to select your option if the menu disappears KEAN simply press the SOURCE key again to display LE 3 Use the down W ARROW key C on the remote to lic fig 2 highlight the DTV option Once highlighted press the ENTER OK key E 4 You are now in DTV Tuner mode Press the DTV Menu key B the DTV menu will be displayed with a Favourite lists list of options
13. TV WITH YOUR PC LAPTOP SCREEN menu is available only for VGA input and deactivated for other input sources The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card Even if your actual screens look different the same basic set up information will apply in almost all cases If not contact your computer manufacturer To access Screen menu you must be in VGA Mode as per above Press ATV MENU on the remote use the right ARROW key to select SCREEN Menu and the down ARROW to access SCREEN MENU Adjust the PC s screen positioning if it does not fit the TV screen Press the A or Y button to adjusting the Vertical Position Press the lt or gt button to adjust the Horizontal Position The purpose of phase and clock adjustment is to remove or reduce picture noise If the noise is not removed by Phase alone then adjust the frequency as best as possible with clock After the noise has been reduced readjust the picture so that it is aligned on the center of screen Press the A or Y button to select Phase or Clock then press the ENTER button Press the lt or gt button to adjust the screen quality Auto Config allows the PC screen of set self adjust to the incoming PC video signal This automatically sets the H Position V Position Phase and Clock If picture is not ok with Auto Config then adjust H Position V Position Phase and Clock manually to adju
14. User Manual LCD Television VIDEOCONMN Model No 325LDF 323LD 263LD Series 3 5 Welcome Thank you for purchasing a Videocon LCD Television Please take time to carefully read this user operating manual paying special attention to the section detailing Warnings and Safety Precautions Being familiar with all of the operational functions of your new TV will greatly improve your viewing enjoyment Please keep this guide safe for your future reference Do not touch any parts inside the TV or make changes to any settings not described in this user guide Table of Contents Specifications Warnings and Safety Precautions Initial Setup Operating Controls and Connections Basic Connection and Switching the TV On Tuning in to Digital TV and Analogue Broadcasts General Troubleshooting USE WOUND Ve nsietiicateswadaveadiniwuateevenne levinedaechsauindietaetinedyaenteaciansedan Menu Operation Adjusting Settings 10 Connecting External Equipment to the TV ccccceeceeeeeees 11 Warranty Certificate Service Contacts 12 Disposal Instructions ee UA Se Specifications EN FULLHD __ Display Resolution 1366x768 1366x768 1920x1080p Viewing Angle 160 H 150 V 178 H 178 V 178 H 178 V Brightness 500 cd m2 Typical 450 cd m2 Typical 450 cd m2 Typical Display Colours 16 2 Million 16 7 Million 16 7 Million Back Light Life normal setting Approx 60
15. WER KEY B DTV MENU C ARROW KEYS D SOURCE KEY E ENTER or OK KEY F ATV MENU G TV KEY H FASTEXT KEY Auto Search Manual Search l Y 74325 MHz 74325 Mil l Program Edit MENU Retun STA Exit Program Edit MES Gs ae Ia MIS T Oyo Cig Goat DI mia 7 General Troubleshooting Before you call the service agent please check the following points Please bear in mind that malfunctions can also be caused by external influences or equipment PROBLEM POSSIBLE CAUSES RESOLVE Mains adapter not plugged in to mains socket or back of TV Is the standby light on Is the aerial connected Is the TV switched on Is it in standby red light NO picture mio sound Is the TV input source on an AV input Select DTV or TV from the input source menu If on an AV source check the HDMI SCART connection etc is firmly in place on the external device and in the socket on the TV Volume is set to minimum or mute Picture but no sound Incorrect sound system setting on ATV search menu should be country ENGLAND Ensure that sound level has not been limited in the Hotel Mode option in ATV menu TV is switched to AV No TV picture Antenna has not been plugged into the TV TV is not installed correctly recheck connections install instructions l Set colour brightness and contrast on ATV video menu Picture has pale colours is too dark or is blurred Ensure colour is turn
16. amcorder DVD player Gane console tas A N Tu REAR PANEL CABLE BOX SATELLITE RECEIVER SET TOP BOX ae i AA Connecting a Set Top Box via Hdmi or Connect an HDMI Cable Not supplied between the HDMI IN 1 2 or 3 jack on ee the TV and the HDMI jack on the Set Top Box Beane l n sled ALINE 8 8 ee Homi Alf unre fw a fe HEMI 2 Ti le T P l an ia 0 No additional Audio connection is oe Ea pos a heeded for an HDMI to HDMI La IIIs connection Ti REAR PANEL Connecting a Set Top Box via Component Cables 1 Connect a Component Cable Not supplied between the COMPONENT IN Y Pz Pa jacks on the TV and the COMPONENT jacks on the Set Top Box Audio cable 2 Connect Audio Cables Not supplied between the COMPONENT IN R AUDIO L jacks on the TV and the AUDIO OUT jacks on the Set Top Box y SET TOP BOX cl ATTE ol 8 Y Phib Preir ANTIN HAMI E E ge IEE a re Me O ff ES C U Connecting External Equipment to the TV PC IN PC AUDIO Connect to the video and audio output jack on your PC or Laptop 1 Press the SOURCE key on the remote control 2 Use the up down ARROE keys to select VGA ES 3 Press ENTER to display PC TV za REAR PANEL SCART1I DIO ES SCART2 AUDIO IN HH Je O ms YPbPr VGA SRM ann HDMI2 HOMIS iH IR F il HH ij O WT 111111 i ua OTA DTV SETTING UP THE
17. annel To execute the On Time and On Program set should be in standby mode NOTE On Time gets deactivated when set is switched off by mains power supply This is reminder and presently viewed channel gets changed to the preset program when Reminder Time reach s Current Time NOTE Reminder Time gets deactivated and Reminder Channel resets to 1 when set is switched off by mains power supply TV set goes to standby after the preset time in Auto Sleep NOTE Auto Sleep is deactivated when set is switched to standby or mains power supply is switched off OPTION MENU Language is used to select OSD display language as per requirement This parameter is used to select Aspect Ratio for picture This parameter is used to control screen display in absence of signal If it is ON then displayed sreeen is Blue and if it is OFF then displayed screen is raster when source is TV and in case of other source displayed screen is Black Keypad Lock function is used to lock the operation of the front keys of TV set This parameter is used to adjust transparency of menu OSD window This function is used to set TTX Language as per requirement Menu Operation ATV MENU LIST Option Menu Continued Child Lock Hotel Mode ATV MENU Child Lock and Hotel Mode Notes For any Child Lock Hotel Mode parameters to function the Child Lock ENABLE and Hotel Mode ENABLE ON OFF option must be ON Channel Lock Source Lock will only function if
18. ar normalise SUBPG see above REVEAL display hidden text used for text quiz games HOLD current page is held on screen giving you time to read the page advertisement etc press again to release aa ee SE EI od BE A CEE E FE oo OM FOUS AS 9 Menu Operation ADJUSTING TV SETTINGS This section will help you in navigating the menu systems used for adjusting TV parameters The On Screen Menu s are very easy to operate simply use the ARROW keys and ENTER key on the remote control to access all functionality Before starting please press TV key on the remote control There are two menu s on this TV 1 ATV Menu Available when the TV is in ANALOGUE TV or DIGITAL DTV mode e For general picture sound analogue tuning and timer child lock hotel mode options 2 DTV Menu Available when the TV is in DIGITAL DTV mode only e For Digital TV configuration personalising DTV channel favourites DTV child lock and hotel modes ATV MENU OPERATION NAVIGATION 2 TI es The ATV Menu allows you to alter general TV settings and is used to SA g ef customise standard picture sound timer etc parameters Language 1 Press ATV MENU to access the ATV main menu screen see fig 1 Thon 2 Use ARROW keys left right to highlight the submenu you wish to Blue Screen enter Video Audio Search Time and Options see fig 2 Keypad Lock 3 Press the down ARROW key to enter the selected subme
19. commands or images unstable Go into DTV menu and perform factory reset auto tune will start automatically once DTV tuning channels ordered incorrectly reset is complete and order channels correctly on the second attempt Poor reception of signal caused by any of the following oF a Antenna cable does not contact adequately to ANT in on TV DTV some digital TV channels missing from the expected Antenna cable is damaged or broken available list Aerial system is faulty TV situated in poor reception area low signal level Check that the HDMI VGA or Component input connecting the device is connected properly and secure HD images are displayed but the visual quality is not good Check that the particular connecting cable is not faulty try another if possible Check that the device s output is set to HD and that HD is enabled Ensure the media is HD standard 8 Using your Television Controls Applicable for Digital and Analogue TV Viewing This section details how to operate your TV set now it is installed and tuned in The first section highlights the key controls applicable to both Digital TV and Analogue TV viewing ON OFF STANDBY Turn on the TV as previously explained using the POWER key on the remote control or the Standby key on the side of the TV unit these are also used to switch the TV back into standby mode CHANGING CHANNELS There are several ways to change the TV channel You can use direct digit
20. der Digital Camera and even a PC or Laptop Computer Please note whenever you connect an external device to your TV make sure that the power on the unit is turned OFF Carefully read the instruction manual supplied with the particular product you are connecting to the TV before you start this should ensure that you connect the device correctly and get the most enjoyment out of it Viewing a Connected External Device on the TV SOURCE INPUT Once the device is correctly fitted to the right connection on the TV and both the TV and the peripheral unit are powered on you will need to access the Input Source menu and select the input option the device you want to view is connected to do this 1 Press the SOURCE key on the remote control fig 1 the Source Input menu appears on screen 2 Use the ARROW up down keys to select the relevant connection the device you want to view is connected to 3 Press ENTER to confirm 4 The TV screen will now display the signal from the external device 5 This is the same process to view all devices you connect 6 For example if you connected a DVD player to the TV using HDMI 1 press the SOURCE key on the remote control use the up down ARROW keys to highlight HDMI 1 and press the ENTER key to confirm see fig 3 7 Togo back to TV Channels select TV for Analogue Tuner mode and DTV for Digital Tuner mode fig 1 SOLU GA bipil TW NE AA TT FARTA h ie L aE
21. e SOURCE key D on the remote control Source keak the source input menu appears on screen fig 2 this will only remain on screen for a few seconds for you to select your option if the menu disappears simply press the SOURCE key again to display 2 Use the down WARROW key C on the remote to highlight the DTV option Once highlighted press the ENTER OK key E 3 An onscreen message DTV Initial Appears followed by a Welcome message after a few moments the First Installation screen fig 3 appears 4 As per the On screen display ensure your aerial is connected to the TV The country option should default as United Kingdom otherwise use the right ARROW key C to select United Kingdom 5 Press ENTER OK E The TV will now auto tune displaying a progress bar and listing channels as they are found fig 4 this will take a few moments to complete Once finished an installation completed message will be displayed fig 5 6 After a few moments the TV will display a TV picture BBC1 usually and is ready to use all done 7 Ifthe TV channels appear in an unusual order or you have TV channels missing please perform a factory reset on the TV and follow steps 3 6 again for instructions on how to do this please see the trouble shooting section in this user guide book Digital Tuning Troubleshooting Digital TV Tuning Issues TV Stations
22. e and remove 3 Fit the batteries 4 Slide and Close These figures are just for reference Use the remote control by pointing it towards the remote control sensor on the TV Remote control sensor The remote control may not work properly if the remote control sensor on the TV is in direct sunlight or bright lighting In such case change the angle of the lighting or TV or operate the remote control unit closer to the remote sensor If the remote control doesn t work check the following Is the TV power on Are the batteries fitted correctly plus and minus terminals Are the batteries drained Is there a power outage or is the power cord unplugged Are there objects between the remote and the TV sensor Ensure the remote is in TV Mode Press the TV key 4 Operating Controls and Connections Remote Control Unit The information on this page will help you to identify remote control function keys Keys A F highlight the important keys used for tuning and Menu selection and is referenced further in the user s manual as a guide A POWER To switch the TV onto standby or power on B DTV MENU To display the Digital TV Menu C ARROW KEYS Used to navigate the menu s D SOURCE To display TV input source menu E ENTER or OK Used to confirm menu selection F ATV MENU To display the TV settings menu Analogue tuning 1 MUTE To disable or enable sound 2 NUMBER KEYS 0 9 For direct access to chann
23. e as User Contrast i i well as the user settings also available in addition you can also use PICTURE button on remote to gt Oyaa a select various picture settings In User mode you can alter colour contrast brightness etc to your Video mode Standard 3 Colour ower onal sees 8s y j rang y Mild Tint p P i Game Sharpness l o p NOTE TINT is available only for NTSC This function is to adjust tint of picture for NTSC signal l Color Temp ia Colour Temperature adjusts the colour temperature of the picture to Warm reddish or Cool bluish Nebr gt en Noise reduction parameter is used for reducing the noise level present in video Reduction Off P 8 P Flesh Tone These parameters are used to increase Green Tone corresponding Red Green or Blue colour of Blue Tone icture Advance gt i Cinema Mode is algorithm for auto detect and Cinema gt Cinema mode enable User can enable or mode disable Cinema mode User Surround This menu is for selecting the pre set Audio setting Flat Pre programmed settings are available as well as the user settin Audio mode gt f prop a S Music In addition you can also use SOUND button on remote to select preset Movie sound settings Sports 50 0 50 By using balance parameter user can adjust balance for sound output Treble gt 0 1 2 50 100 This parameter is used to adjust higher frequency level in sound output LE 0 1 2 50 100 This parameter is used
24. ed up on the ATV video menu screen l Antenna cable does not contact adequately There is no colour on all channels Antenna cable is damaged or broken Aerial system is faulty Interference caused by outside source other electronic equipment fluorescent lights Microwave oven Hairdryer or car motorcycle Bad picture on standard TV with interference Aerial system is faulty TV situated in poor reception area Try fine tuning individual channels Antenna cable does not contact adequately to TV ANT in socket KOO Antenna cable is damaged or broken Interference or blocky disappearing images on DTV channels B Aerial system is faulty TV situated in poor reception area TV station does not transmit teletext pach Weak bradcasting signal Teletext missing or corrupted faulty T3 B B Receiving broadcast in a poor reception area Aerial system is faulty Check that the remote is in TV mode and not Sky mode by pressing the blue TV button TV is not switched on The remote batteries are flat or inserted incorrectly remove batteries and re insert correctly Remote control does not work Bright external light is falling on the TV remote sensor or remote control signals Obstacles between the remote control and the TV remote sensor can affect data transmission Switch off the TV by disconnecting from the mains Wait 10 seconds and try again Switch off the TV by disconnecting from the mains Wait 10 seconds and try again TV does not respond to
25. el selection SA For a 2 3 digit channel number press the 2 3 digit sde without hesitation Also use these keys for text entry options within the menu e g channel naming in ATV 3 TV RADIO Switches the TV between current TV channel and the current radio channel DTV 4 SUBTL In DTV mode used to turn subtitles on off and toggle through subtitle language options if available 5 TV Press this to have the remote operate the TV 6 SKY Press this to have the remote operate a SKY box all blue key functions become active and normal TV operation is disabled Please note that this feature will only work with certain SKY box models not Sky or HD 7 AUDIO LANG if the TV channel has multi lingual alternate audio tacks use this key to select which track to listen to 8 EPG Electronic Programme Guide In DTV mode only calls up the TV guide system showing you what s on 9 QV PREV Selects the previously viewed channel 10 FAV NEXT To select your favourite channel list 11 VOL To adjust sound level 12 CH To view the next or previous TV channel 13 Colour Keys Used to access Fastext options Analogue TV 14 ZOOM Selects between 4 3 16 9 aspect ratio viewing options 15 PICTURE Recall default picture settings 16 SOUND Recall default sound settings o 17 DISPLAY Use to display TV and source information on screen 4 lt in REPEA 18 EXIT 1 11 Use to exit menu s and teletext I II used
26. erstorm Both the mains and the aerial should be disconnected under these conditions Unplug the TV in case of abnormal operation smoke odd sounds or smells The TV is designed for operation on a 100 240V 50Hz 60Hz AC power source Aerial Information connect the antenna cable from your antennal cable socket or Vi the room roof antenna to the ANT IN terminal on the back of the TV to be able to receive both Digital and Analogue broadcast transmissions For proper operation performance we recommend you use an antenna cable with a ferrite filter at both ends Cautions regarding use in high and low temperatures when the unit is used in low temperature conditions the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal Do not leave the unit in a hot or cold location as previously discussed do not leave in direct sunlight or near a heater as this may cause the cabinet to deform and the LCD panel to malfunction NO WARRANTY CLAIMS ARE ACCEPTED FOR DAMAGE CAUSED BY UNSUITABLE USE This TV product is designed to receive and display video and audio signals and for use as a PC monitor ANY OTHER USE IS PROHIBITED Maintenance amp Notes Cleaning Unplug the AC cord from the AC outlet before cleaning the product Use a soft non abrasive cloth to clean the product Do not use liquid cleaners or aerosol cleaners
27. ey allows you to choose between those audio tracks languages available Controls Applicable for Digital TV Viewing Only The following features are applicable when you are in the DTV Tuner mode only CHANNEL LIST As well as being able to use the CH CH and direct number access you can change channel by selecting from a channel list accessed via the ENTER key when in DTV Tuner Mode Press ENTER a channel list appears on screen use the ARROW keys up and down to select a channel from the list on screen and press ENTER to access that channel TV RADIO KEY When pressed this key alternates between the last TV channel viewed and the stored radio channels available on Digital Broadcasting The key will always switch to the previous radio or TV channel used Using your Television EPG ELECTRONIC PROGRAMME GUIDE DTV Only Press this button to access the Electronic Programme Guide An On Screen Display appears detailing the programme schedule listings for the remainder of that day Use the left right ARROW keys to select a different day the EPG system stores 8 days worth of information for each channel Use the up down ARROW keys to scroll through the days listings as a programme is highlighted information about it will be displayed Press the DISPLAY key for more information PAGE PAGE access next previous channel listings Press EPG to return to normal viewing DIGITAL TELETEXT Some dig
28. ion FOR TOP UP TV PAY TV Certain Digital TV Stations will be inaccessible and a Scrambled Signal message is displayed on screen These channels require you to have a current valid TOP UP TV card inserted into the TV to view them TV set You will need a Cl CAM unit sold separately to insert a TOP UP card into the TV A FRERCE see a suitable electrical retailer for more details Olcar CAM SLOT e Insert the TOP UP card into the CI CAM adapter as shown e Insert the CAM unit into the Common Interface Slot on the TV e Insert the CAM in the direction of the arrow e Insert the CAM right up to the end so it is parallel with the slot You can install the CAM anytime whether the TV is ON or OFF Connecting External Equipment to the TV TY S VIDEO or VIDEO R AUDIO L Sean BAe AY output Connect RCA or S VIDEO cable not supplied to an appropriate ox 3 E external A V device such as VCR e jp Audio cable i sa a ds or Camcorder Connect nen R1 5 ot i fei n audio cables not supplied to R Composite Video cable i AUDIO L on your set and the other fin w eA ai YAE o ends to corresponding audio out A ar I connectors on the A V device S Video cable AUDIO OUT R AUDIO L Connect RCA audio cables not Pz ay supplied to AUDIO OUT R AUDIO ett te L on the rear of your set and the BEA ca other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre C
29. ital broadcasting channels offer a digital text service To access digital text where available you may be prompted to press the red FASTEXT key otherwise press the TEXT key You can either use the ARROW keys to select subjects from a menu pressing the ENTER OK key to confirm or key in a page number if known to directly access e g page 300 type 3 0 0 After a short period the requested page will be displayed Follow a ld the on screen prompts to navigate through each service available Controls Applicable for Analogue TV Viewing Only The following features are applicable when you are in the Analogue Tuner mode only TELETEXT FASTEXT Press TEXT to operate TELETEXT services You can access pages of information in multiple ways Use O 9 Keys for direct selection of 3 digit page number as per the text index e g for page 301 key in 3 0 1 Use colour FASTEXT keys press the colour button corresponding to the item you wish to view e g If Headlines is displayed in red press the red FASTEXT key to display that item Use either CH CH keys or ARROW keys up down to go to the next previous page number Use ARROW keys left right to access subpages where applicable INDEX press to access main TEXT index service CANCEL display TV picture with notification of updates SIZE display top bottom and full page enlarge text MIX text overlay on TV picture press again to ot CREF 4d kun Sar ne M
30. itch the TV back on simply press the POWER key A on the remote control or Standby on the TV set TV Rear Place the TV close to the AC outlet and keep the power plug within reach TV Front Mig 30 ji e f menu when the TV is not in use for a prolonged i period of time and before going to bed IO E4 e Ensure that the mains plug is easily HH Once in Standby to fully switch off the TV remove the AC plug from the power outlet E E n e accessible at all times The power control on this model does not fully disconnect the TV from the mains supply unplug to fully switch off Do not leave on standby or switched on when you leave the house 6 Digital Tuning First Installation First Installation Remote Control Unit Ensure that the remote control is in KEY CONTROLS A 0 TV mode press the TV key G fig 1 the remote will now OO y operate the TV ae B A POWER KEY Gn Gp Gn With the TV connected and switched on as described B DTV MENU cD EN previously follow the steps below to tune into Digital TV _ 90002 broadcasts C ARROW KEYS D SOURCE KEY oo Se DIGITAL TV TUNING E ENTER or OK KEY 00 When the TV is switched on for the first time it may default ay S 9 Q to Analogue Tuner Mode Standard TV To start Digital F ATV MENU Tuning you must switch the TV into DTV Mode G TV KEY C uU f I I a r se Wr 1 Press th
31. nels with two type New or Add in Auto and Manual Channel Installation Installation The Installation can be new one or can be an addition to the current installation Manual Installation Installation ceci languages Audio languages Subtitle languages Subtitle Disola gt On This screen allows you to customize the TV set You can set User Settings gt eon Off your preferred language Info Audio Subtitle Languages Opaque modify the subtitle display opacity level and LCN On Off On This option allows you to erase all DTV parameters clearing all DTV memory If it is activated all DTV Channels and user preferences are deleted DTV will restart for a First Time Installation System Parameters gt Software Upgrade The software can be automatically updated with a new release during the standby of the TV set Factory Settings formation This screen gives you some information about the TV y Device Version and Software Version This parameter indicates channel number channel frequency and quality of signal in terms of Bit Error Rate BER Signal Information gt Insert Card Adapter into Cl slot Conditional Access CI CA will be detected and displayed in the Multi CI CA List menu Insert the Card then press Enter to enter in the Main menu 3 PARENTAL CONTROL PIN Code The pin code is 0000 by default If the Parental Locking is Disabled then all the parental locking features are deactivated Pare
32. ntal Control gt ee If it is Enable then all the parental locking features are applied according to to your choice If this item is set to YES each time the TV set turns to running mode the PIN code has to be input This item allows you to protect access to the menu screen and all sub screens You can apply a parental maturity level up to 18 years of age In this case all services which are over age limit become inaccessible unless the viewer enters the PIN code This system depends on the information forwarded by the broadcaster A press on RED button allows you to modify the PIN code from default 0000 to any user defined PIN code 4 HOTEL MODE PIN Code The pin code is 0000 by default Hotel Mode The Hotel Mode sub menu allows you to Enable Disable Hotel Mode Force Position gt You can use this feature to force the TV to switch on to a particular DTV Programme number Not Install gt Thisitemcan enable or disable the channel Install menu Al This item can enable or disable the channel Install menu item can enable or disable the channel Install menu Change Password gt This parameter used to change the default password 0000 to any user defined password Maturity Level 10 Connecting External Equipment to the TV SOURCE INPUT CONNECTION PANEL The sockets on the back of the panel are used when connecting external products to your TV for example a DVD Player VCR Blu Ray Player PVR Games Console Camcor
33. nu OSD Transparent 4 Use ARROW keys up down to select a parameter e g colour etc ii Lelio ue 5 Use ARROW keys left right to adjust the selected parameter MENU ENL 6 Press the ATV MENU key to step back to previous menu submenu 7 To exit to TV keep pressing the ATV MENU key until the main menu disappears Off the Screen os e aa a l l l l ATV Main Menu fig 2 l l l l l i Video Audio Search Time Options Picture Settings Sound Settings ATV Tuning Timer Settings General Settings DTV MENU OPERATION NAVIGATION e e The DTV MENU is only accessible when the TV is in DTV mode and is used to customise digital tuner options Favourite lists Press DTV MENU to access the DTV main menu screen fig 3 Configuration Use ARROW keys up down to make a selection Parental Control Press ENTER to confirm selection proceed Hotel Mode Use ARROW keys left right to adjust a setting in a menu Press the DTV MENU key to exit from the DTV menu PA fig 3 The tables on the following pages detail the options available in both the ATV MENU and the DTV MENU The key functions are listed with details of the parameters that can be adjusted and what they are used for The menu layout in this user guide may differ slightly from your TV 19 Menu Operation ATV MENU LIST For Main Menu Press ATV MENU Key VIDEO MENU This menu is for selecting the pre set picture settings Pre programmed settings are availabl
34. number selection keys 0 9 Select programs 0 199 directly by using direct digit keys To select single digit program number press desired digit 1 2 3 etc after a few moments the channel will appear To select 2 digit or 3 digit program number e g 83 or 132 press 1 294 or 34 digit within 2 seconds You can also use the CH and CH keys to select the next previous TV channel available in a stepped sequence VOLUME CONTROL amp MUTE Increase decrease sound level with VOL and VOL keys On Screen Display shows visual representation Use MUTE to cut off the sound useful if the phone rings To turn the sound on press the MUTE key again On Off SOURCE SELECTION TV DTV AV PC Use to change the input source of the TV from Digital Tuner mode to Analogue Tuner mode and to view connected devices via SCART HDMI etc DVD Player Camcorder etc Menu driven use the SOURCE key to open Input Source menu then use ARROW keys up and down to navigate to desired source selection press ENTER OK to confirm selection source will be displayed TV is ANALOGUE tuner mode DTV is Digital TV mode ZOOM Use to change the aspect ratio of the screen 4 3 16 9 Full and Original Native Modes available depending on broadcast Each press of the key will cycle through the alternative options QUICK VIEW PREVIOUS CHANNEL Pressing this key will change the TV channel to the station viewed
35. o 90 C ARROW KEYS D SOURCE KEY ANALOGUE STANDARD TV TUNING E ENTER or OK KEY When the TV is switched on for the first time it may default to Analogue Tuner Mode Standard TV if not to start F ATV MENU Analogue Tuning you must switch the TV into the TV Mode G TV KEY C standard terrestrial TV broadcasts 0 piece 100 Gg De 0 0 Source Input 1 Press the SOURCE key D on the remote control the source input menu appears on screen fig 2 this will only remain on screen for a few seconds for you to select your option if the menu disappears simply press the SOURCE key again to display 2 Use the up down LAY ARROW keys C on the remote to highlight the TV option Once highlighted press the ENTER OK key E The TV will switch into analogue tuner mode 3 Press the ATV MENU key F to display the TV main menu The menu will default to the Video menu see fig 3 Use the right gt ARROW key C to highlight the Search menu see fig 4 4 Press the down ARROW key C to highlight the Country option and use the left or right ARROW key C to select ENGLAND 5 Press the downN ARROW key C to highlight Auto Search and press the right gt ARROW key C to begin tuning 6 An Auto Program banner will appear on the screen see fig 5 displaying a progress bar All available tuner frequencies will be searched and any channels found stored
36. on The remote control uses 2 x 1 5V AAA batteries For battery installation and replacement please follow the instructions below 1 Turn the remote control unit upside down Carefully press down on the grip of the battery compartment slide back and remove the cover in the direction of the arrow see fig 1 and 2 2 Install the new batteries making sure that the battery polarity matches the and guide inside the battery compartment The unit can be damaged if the batteries are not positioned correctly see fig 3 3 Close the battery compartment cover carefully by sliding it in the direction indicated fig 4 It should click into place once secured Cautions regarding the remote control unit e Do not expose the remote control to impacts dropping sitting on etc e Do not spill liquids on the remote control and do not place in areas of high humidity e Do not leave in direct sunlight the heat may cause deformation of the unit e Remove the batteries from the remote control if you are not using it for a long period of time several weeks e Do not throw away used batteries with normal household waste e Do not mix new and used batteries e Do not use rechargeable batteries e Do not mix battery types alkaline with carbon zinc etc e Do not expose batteries to excessive heat throw them on the fire recharge them or try to open them as this could cause them to leak or explode 2 Slid
37. previously very handy when switching between two particular TV programs you want to keep an eye on a a A BE o N Y I SEED a a as S es i ai I I i i Y S 1 I BR oo Or l l Using your Television PICTURE SOUND RECALL Press the Picture key to reset picture colour contrast brightness levels etc to previous settings Press the Sound key to reset audio treble bass balance levels etc to previous settings DISPLAY Calls up on screen information of TV status display source program channel and programme information etc To turn off OSD press the DISPLAY key again or await timeout SUBTL Press the SUBTL key to enable or disable subtitles Please note that subtitles are only available on certain programmes channels and coverage is dependent on the broadcaster TV AND SKY REMOTE CONTROL Press the TV key to use the remote unit to function with the TV This is Normal Operation mode If the remote does not seem to be operating the TV press this button and retry Press the SKY key to use the remote unit to function with compatible set top system s or sky receivers Compatibility is limited to certain models sold in the EU not digital plus or HD All TV functions are disabled in this mode press TV to enable AUDIO LANG If the current channel you are viewing has several audio tracks or multilingual options the AUDIO LANG k
38. st to the desired picture settings Select this option to activate deactivate the ON OFF o PIP function picture in picture You can display a sub picture within the PC main screen In this way you can watch the picture of set programme or video input from any connected equipment while PC sceen is active Ll 12 Disposal Instructions CORRECT DISPOSAL OF THIS PRODUCT Waste Electrical amp Electronic Equipment T 8 O ROHS COMPLIANT This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling This product should not be mixed with other commercial wastes for disposal This symbol certifies that the product has been manufactured in compliance with the European Standards Helpline Number 0845 293 7697
39. t service on the number below Fitting the Stand Mount to the TV Remove the TV panel from the box and place face down on a flat cushioned surface take care not to damage the screen 1 Remove the cap from the bottom of the TV as shown in fig 1 retain for possible future use 2 Insert the stand mount into the opening of the TV as shown and carefully slide into position fig 2 Please ensure you correctly orientate the stand see fig 4 3 Align the screw holes on the mount with the screw apertures of the TV 4 Insert and tighten the four screws supplied at the rear of the TV as shown in fig 3 take care not to over tighten the screws 9 Carefully lift the TV upright and position on a flat stable surface for viewing 6 To detach the stand perform the above steps in reverse order Stand Top View Stand Column Notes on wall mounting the TV Initial Setup Wall mount items sold separately allow you to wall mount this TV onto a wall For detailed information on installing the wall mount please see the instructions provided with the specific bracket Contact a technician for assistance when installing the TV on a wall mounted bracket e DO NOT install your wall mount while the TV is turned on It may result in personal injury due to electric shock e Remove the stand and cover the stand mount recess with the cap originally supplied with the TV see previous page Remote Control Battery Installati
40. these ENABLE commands are ON You can select as many individual channels sources to lock out simply select each channel source and select Channel Source LOCK ON Force Position in Hotel Mode is only applicable to a single source channel his feature is used to change the default password 000000 to any user defined Change Password password please remember this password keep a written note in a safe place On By using this parameter user can Enable or Disable the Emile LOCK Enable Child Lock either by selecting On or Off This parameter is used to lock specific channels when Channe Numsen bfo Child Lock Enable and Channel Lock is On On By using this parameter user can Enable or Disable the camente Channel Lock either by selecting On or Off Child Lock TV Tae passwora is SCART1 000000 by default SCART2 S Video gt a This parameter used to lock any input source s when HDMI Child Lock Enable and Source Lock is On HDMI2 HDMI3 On By using this parameter user can lock any source by This feature is used to change the default password 000000 to any user defined Change Password l Password please remember this password keep a written note in a safe place On By using this parameter user can Enable or Disable the Child Lock HOtELMEAS ENNIE TE by selecting On or Off his parameter is used to set the channel program number on Force Pos gt hich set goes forcefully when switched on from standby or mains supply
41. to E switch between NICAM Stereo Mono options and NICAM dual I dual I or mono when in non menu operation 19 PAGE Press to view the next EPG program DTV 20 PAGE Press to view the previous EPG program DTV 21 TEXT Used to enter Teletext mode Analogue and DTV 22 INDEX Use to go to text a z index page MENU INTERACTIVE AUDIO VAN PAGE 23 CANCEL Text option used to temporarily display TV picture For illustration purposes only until text page refreshes gives notification on screen some functions apply to this brand 24 SIZE Used to increase text size in teletext mode press to of VCR and DVD players only and as displays top half of text screen enlarged press again to such are not explained here display bottom half and press again to display normal 25 MIX Mix TV picture and text as an overlay 26 HOLD Freeze text subpage on screen 27 SUBPG Subpage Index Key 28 REVEAL Use to display hide information on certain text pages quiz game solutions etc Operating Controls and Connections Operating Controls Names and Functions Front Right Side Controls LED INDICATOR the light is blue when the power is on and red when TV is in stand by mode VOLUME UP increase the volume CHANNEL UP CH access next TV channel MENU press to display On Screen Menu of the TV s features and settings STAND BY press to switch the TV stand by on off NV 3 pa Fl A 4 Ja 5
42. ventilation is essential to prevent set failure The vents and other openings on the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the TV on a bed sofa rug or other similar soft surface since they can block ventilation openings This product is not designed for built in installation do not place the TV in an enclosed place such as a book case or rack unless proper ventilation is provided You should leave at least 5cm space around all sides of the TV Do not locate the TV on unstable sloping or uneven surfaces this can cause the product to fall resulting in serious personal injuries as well as damage to the product Do not place the product on an unstable cart wall mount stand tripod or table When relocating the product placed on a cart it must be moved with utmost care Sudden stops excessive force and uneven floor surfaces can cause the TV to fall causing damage and possible serious injury The LCD Panel used in this product is made of glass therefore it can break if the unit is dropped or an impact applied If the LCD panel is broken be careful not to be injured by broken glass and remove the power lead before touching the unit Lifting and carrying the TV requires two people when moving the TV it should always be carried in both hands be careful not to apply pressure on the
43. when Hotel Mode Enable is On amp Force Video is set to TV TV AV SCART1 Hotel Mode SCART2 The password is gt S Video his parameter is used to set the source that is forcefully selected 000000 by default Force Video YPbPr hen TV is switched on from standby or mains power supply when Hotel Mode Enable is On his parameter is used to lock the SEARCH tuning menu when Hotel Mode Enable is On hen Hotel Mode Enable is On user can set a maximum volume Max Volume limit A viewer can increase the volume up to this level only and no higher Adjust Max Volume parameter to set limit Search Disable Menu Operation DTV MENU LIST For Main Menu Press DTV MENU 1 FAVOURITE LISTS ner cS Name This screen allows you to create a new favourite channels list with selection criteria Channels The name of the list is set to FAV 1 2 for TV services and RFAV 1 2 for Radio This screen allows you to modify a favourite list FAVOURITE LISTS gt The current favourite list name is displayed on the top of the screen User can modify Modify a Favourite List gt Radio the channel list by Lock Skip Delete Sort Move or Skip All Add All the channels TV NOTE Channels deleted from the favourite list will also get deleted from the actual list Delete a Favourite List This screen allows you to delete a complete favourite list 2 CONFIGURATION Auto Installation This screen allows you to install chan
Download Pdf Manuals
Related Search