Swann SW343-LPP
Contents
1. 6 If you would like to deactivate the whole area push the STOP button on either the remote or the DVR control panel this will clear all the boxes and leave the entire screen highlighted 7 To reverse this effect push the ALL button on the remote or the QUAD MODE button figure Blinking highlighted box T H dented i figure 2 Area active for motion detection Figure 1 has the checkered pattern over the entire image motion detection is active Figure 2 shows the same image without the checkered pattern motion detection in When motion detection is active the area will be covered with currently not active over the entire image a checkered pattern around it The highlighted blinking box is the box currently selected Push When motion detection is inactive the image will have a high the select button to activate and deactivate this box light over the entire screen ystem Password The DVR includes the option of a six character password When the password is enabled the DVR will prompt you for it when you try to a stop a recording b reset the menu c access the main menu d format the hard drive You will be prompted for the password when attempting to format the hard drive whether the password is enabled or not Enabling and disabling the password 1 Select the MISCELLANEOUS SETUP option in the Main menu 2 Scroll down to the PASSWORD ENABLE option 3 Push the SELECT button to set to ON to enable the pas2. Dutton Click where it says PAUSED CLICK HERE TO PLAY to play the captured footage To pause it click the same button again 4 To convert to AVI click the CONVERT TO AVI button 5 To view the footage go to the location where captured footage is saved as an AVI file PAUSED Click hore to PLAY 21 850 0 Start End asig Comert to AWI Canoa HDD Vi ewer DxClient Configuration HDD Viewer In this configuration window you can choose where you want the capture images and recording files be saved and change other miscellaneous settings concerning the DVR when it is connected to a PC using a USB cable Note to view the DVR using the DxClient HDD Viewer the DVR must be connected directly to a PC using a USB cable 1 Click the DVR SETTINGS button This will bring up HDD viewer DXCLIENT CONFIGURATION window 1 BMP CAPTURE SETTING clicking this options sets the DxClient to show on top of other opens a window so you can choose where the capture images windows on start up will be saved when you push the CAPTURE IMAGE button 6 NORMAL PLAYBACK AT STARTUP 2 NO ADDITIONAL INFO ON BMP IMAGE click to choose whether the recording plays or is paused on click to show additional information on captured BMP image startup in HDD viewer mode 3 RECORD CONFIGURATION SETTING 7 HIDE CHANNEL FRAMERATE ON SCREEN opens a window so you can choose where the AVI stream click to choose to hide or show the frame
3. Swann olug amp playsecurity Advanced security made easy DVR4 1160 MPEG 4 Channel Digital Video Recorder Operating Instructions Before You Beg FCC Verification NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to part 15 of the FCC Rules These limits are de signed to provide reasonable protection against harmful interference in a residen tial installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help These devices comply with part 15 of the FCC Rules Operation is subject to the following two conditions 1 These devices may not cause harmful interference and 2 These devices must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE Prohibition against eavesdropping Except for the operations
4. adjust the weight intensity of each colour 5 To increase and decrease the settings use the RIGHT and LEFT buttons on the remote or the FWD and RWD buttons on the front panel Miscellaneous Setup Hidden Channel The DVR allows you to hide a channel during monitoring mode The hidden channel will allow you to record and view in playback mode but the display screen for that channel will show a black screen on the live screen 1 In the Main menu select MISCELLANEOUS SETUP and then HIDDEN CHANNEL 2 Push the SELECT button to choose the channel When OFF is selected no channel will be hidden 3 Push the Menu button to go back to the Main menu Miscellaneous Setup Keypad Tones The beeper sound you hear each time you push a button can be disabled 1 In the Main menu select MISCELLANEOUS SETUP and then KEYPAD TONES 2 Push the SELECT button to turn ON or OFF Sequence Dwell Time With sequence dwell time activated you can set the time the display shows each channel when the channels are viewed in individual mode 1 Select SEQ DWELL TIME in the MISCELLANEOUS SETUP screen 2 Push SELECT to choose between 1 5 10 15 30 60 seconds and OFF 3 To activate the sequence function push the PAUSE button when you are in display mode 4 Push PAUSE again to deactivate the sequence Video Loss Time This function allows you to set a buzzer sound if one of the cameras connected were to be unplugged or if the DVR
5. control recording view playback and control cameras depending on the cameras must have PTZ capabilities Note to view the DVR using the DxClient Netviewer the DVR must be connected to a network using the network cable DxClient Configuration Netviewer 1 Click on the DXCLIENT SYSTEM SETTINGS button This will bring up the Netviewer DX CLIENT CONFIGURATION window 1 CH1 CH2 CH3 or CH4 Click on the channel you 5 Sensor Recording Click to open dropdown options would like to change the settings on 5 10 15 20 25 and 30 seconds Highlight and click to make selection 2 Camera Setup Click to turn camera setup ON and OFF 3 Record setup OFF 6 Alarm Sounding Click to open dropdown options 5 10 15 20 25 30 seconds CONT continuos and OFF Click to turn record setup ON and Highlight and click to make selection 7 EXIT Click to close DxClient Configuration window 4 Record Quality Click to open dropdown options HIGHEST HIGH NORMAL and LOW Highlight and click 8 Schedule Record Timeline NO RECORD S to make selection Sensor Record A Normal Record Click on the S A or to change the record setting Z gt Channel Setting CH 1 qe cH 1 CH 2 CH 3 CH 4 EHS EHE EH EHS EH BATU EHT1 ERRE SERRES ERARE ampi SERRE R mE ed F000 8 00 9 00 10 0011 00 5 Stream Capture Using the Stream Capture function you can record live foo
6. could no longer detect that camera The buzzer will beep three times 1 Select VIDEO LOSS TIME in the MISCELLANEOUS SETUP screen 2 Push SELECT to turn ON and OFF Audio Port Setup The DVR allows audio to be recorded on one of the channels If your cameras do not support audio a seperate micro phone can be connected for this 1 In the Main menu select MISCELLANEOUS SETUP and then AUDIO PORT SETUP 2 Select AUDIO PORT 1 VIDEO CHANNEL and push the SE LECT button to select which channel the audio will be recorded from 3 The next option allows you to activate the recording Push the select button to turn the audio recording ON and OFF Miscellaneous Setup continued Language Setup The DVR can be set to 5 foreign languages Italian French Dutch Portuguese and Spanish 1 In the Main menu scroll down to the LANGUAGES option and push SELECT to change the language Note If you have changed the language and are having trouble set ting it back to English simply push the MAIN menu button until you see one of the options below SELEZIONE LINGUA CHOIX DE LANGUE SPRACHE EINSTELLAN IDIOMA SELECTO IDIOMA Then scroll down to the one you see from the list above and push the SELECT button until you get back to English Record Screen 4 5 6 1 Record indicator When a channel is recording the record indicator will appear beside the channel number 2 Audio indicator The audio indicator will appear
7. 06 26 15 24 30 cancel Installing and chan the HDD Note the following instructions are for installing or changing the hard drive If your DVR already has a hard drive pre installed disregard these steps 1 Ensure the DVR is unplugged and removed from mains power 2 Locate and remove the 5 screws 2 on each 3 Pull up the top case of the DVR side of the DVR and one on the back at the top of the case side of DVR 2 more screws on otherside of DVR Remove back of DVR 4 Locate the 4 screws holding down the 5 Push the metal clip on the SATA cable hard drive stand single RED or ORANGE cable to unplug the cable from the hard drive Unplug the power cable 2 BLACK 1 YELLOW and 1 RED cable from the back of the Hard Drive SATA Cable Power Cable Now remove the 4 screws attaching the stand pieces to the hard drive Remove 6 Replace the Hard Drive and plug in the SATA and the power cable as shown in step 5 7 Screw in the hard drive to case as in step 4 8 Replace the top of the case 9 Screw in the remaining screws to the sides and back of the DVR as in step 2 Troubleshooting Problem My monitor is not showing any display picture Solution Make sure you have connected the VIDEO OUTPUT to a VIDEO INPUT on the back of your TV monitor Problem My DVR does not switch on Solution Make sure you have plugged in the power supply 12V 3A to the DVR and into the wall socket Pro
8. pin DxClient down This will keep the DxClient above other windows opened this can also be done by RIGHT clicking and selecting ALWAYS ON TOP 12 Minimise Press to minimise screen 13 Maximise Press to maximise screen 14 Close Press to close DxClient 15 Software Version 16 Left Move camera left in PTZ 17 Up Move camera up in PTZ 18 Display Select Press to select the display you would like to view 19 Right Move camera right in PTZ 20 Down Move camera down in PTZ 21 Zoom In Press to zoom in iris in or focus in only functions with cameras capable of PTZ 11 1213 14 15 33 32 31 22 PTZ Control Press to change between ZOOM IRIS and FOCUS 23 Zoom Out Press zoom out iris out or focus out 24 Hdd USB Connection mode 25 File Press to select DVR streaming backup file location 26 Net Press to open remote viewing login window 27 DVR Settings Press to view DVR settings 28 Event List Press to view event list 29 Dxclient Configuration Press to view System settings 30 Disconnect Press to disconnect DxClient 31 Volume Panel 32 Volume Bar Drag volume bar to increase and decrease volume 33 Display Double click on a display to view that channel individually Double clicking on the individual channel display will take you back to quad mode You can also RIGHT click on the display to bring up each option Netviewer The DxClient Netviewer allows you to view
9. you don t know your PUBLIC IP ADDRESS go to www whatismyip com You will need to access this site from a computer which is on the same network as your DVR Input the IP address you get from the WHATISMYIP website in the HOST NAME field when logging into the DxClient or in the address bar when accessing the using Internet Explorer Login 3 In the login window type in the following information xj Host name IP ADDRESS eg 192 168 1 100 Host port HTTP PORT eg 80 Host Mame 192 168 1 100 4 User name ADMIN ID eg admin default Host Port 80 80 1024 49151 Password ADMIN PASSWORD eg 111111 default ars User Name admin 4 Push login You should now see the camera display on your PC now Password fimi If you are getting a warning message saying invalid ID or password go to the USER SETUP screen to confirm you have Cancel the correct information DxClient Layout 10 1 Play Press to begin playing recording 2 Pause Press to pause recording 3 Stop Press to stop recording 4 Record Press to begin recording 5 Rewind Press to rewind during playback 6 Time Search Search recording by entering specific time 7 Convert To Avi Press to begin stream capturing 8 Capture Image Press to capture image 9 Video Time Bar Drag during playack to jump to a specific time in the recording 10 Toolbar Double click to maximise screen 11 Pin Down Button Press to
10. 30 seconds Alarm Time This is the time the alarm continues to beep after the DVR has detected motion 1 With the ALARM TIME option selected push the SELECT button to choose between 5 10 15 20 25 30 seconds CONTINUOUS CONT amp OFF Motion Detector Setup This section allows you to set up motion detection for each camera See instructions on MOTION DETECTOR SETUP for setting up the motion detector area a E a a i i I V k iD E 1 Select whether you want motion detection ON or OFF The motion detector levels range from 1 3 with 1 being the least sensitive and 3 having the highest sensitivity 2 With the LEVEL option selected push the SELECT button to scroll through the motion detector sensitivity levels 1 3 3 Selecting the AREA option in the MOTION DETECTOR SETUP screen will take you to a full screen display of the camera you have selected Here you can choose the active area for motion detection for the camera The display will have a checkered pattern over the whole image This means the whole area is currently active for mo tion detection CF 5 Using the arrow keys move the highlighted blinking box to the area you want to deactivate the motion detection Once you m Al ion Orel bey selected a box to start on push the SELECT button to deactivate SME Tr rrilil F that box Continue using the arrows keys to select boxes you i wish to deactivate cw i
11. TION window 2 Click on the MCG BACKUP button at the bottom of the E E neer ee Croan Macded window Stop omaithon O V Orina Receding iiep af emeni em Audio hamwe hi i oa 3 BACKUP STARTS Select the date and time from when you j want the backup to begin Sues 4 BACKUP ENDS Select the date and time when you want the chew R E COM backup to end BackupEnd 206 a iia 5 DRIVE Select the hard drive you would like the MCG file to Tasse a O be saved in 6 FILENAME Name your back up file The default name is prem DUMP MCG Remember to include the MCG file extension if you Fish tom Lanai Diak Wi change the filename otherwise the DxClient will not be able to find the backup file tet are Burr ac 7 Click OK Backup will now begin etn RE ii z D DIA ATAWY Aa E Viewing Backup File Once you have selected the drive you want the backup files to be saved on and have completed the backup you can view the file on the DxClient 1 Click on the large FILE button on the right panel of the DxClient Note viewing the recordings can be done with the DVR connected to a PC using either USB or network cable 2 Select the drive you chose to save the backup file on 3 Search for the MCG file on that drive and click the MCG file 4 Click the OPEN button 5 The backup file will now begin to play in the DxClient F r cl tpt TEE Cae 4 Event Record List With the DxClient so
12. Video Format Video Input Video Output Display Resolution Display Frame Rate Audio Audio Input Audio Output Recording Compression Format Recording Resolution Recording Frame Rate Recording Modes Multiplex Operation HDD Interface Hard Drive Support Network LAN Connection Network Interface Network Type Protocol DDNS Supported Remote Operation General Operating Power Dimensions Weight Backup Method Mouse Support Remote Control Remote Battery Type the HDD DVR4 1160 NTSC or PAL 4CH Composite 1CH Composite NTSC 720 x 480 PAL 720 x 5 6 NTSC 120fps 4 x 30fps PAL 100fps 4 x 25fps 1 RCA Input 1 RCA Output MPEG4 NTSC 720x240 PAL 720 x 288 NTSC 60fps 4 x 15fps PAL 50fps 4 x 12fps Manual Schedule Motion Triplex SATA Up to 11TB Yes RJ45 Static DHCP PPOE TCP IP Yes Yes DC 12V 9 8 x 8 7 x 1 6 250mm x 220mm x 40mm 3 3lbs 1 5 Kg USB to PC No Yes 2 X AAA Swann Technical Support All Countries E mail tech swannsecurity com Telephone Helpdesk USA toll free AUSTRALIA toll free 800 627 2799 1300 138 324 Su 2pm 0pm US PT M 9am 5pm AUS ET M Th 6am 0pm US PT Tu F lam 5pm AUS ET F 6am 2pm US PT Sa lam 9am AUS ET USA Exchange amp Repairs NEW ZEALAND toll free 800 627 2799 Option 0800 479 266 M F 9am 5pm US PT INTERNATIONAL 61 3 8412 4610 See http www worldtimeserver com for information on time zones and the c
13. arch Video screen will display all the recordings currently stored on the hard drive Playback will automatically play in quad mode if you would like to view the footage in individual mode simply push the channel button 1 4 you d like to view individually push the QUAD button on the front panel or the ALL button on the remote If there is no recordings stored on the hard drive you will not be able to access the playback screen Playing a recording 1 Use the UP and DOWN arrows to select the recording you would like to playback The most recent recording will be at the top of the list 2 Push the PLAY button to view the recording you have selected Searching the list by time 1 Push the MENU button to scroll up to EVENT then push the UP or DOWN button to scroll between TIME and EVENT 2 With the red arrow beside TIME push the SELECT button 3 You will see the date and time Use the LEFT and RIGHT arrows on the remote or the RWD and FWD buttons on the DVR front panel to scroll between each digit for the date and time Note the 20 for the year cannot be changed 4 Use the SELECT button to change the individual digits for the date and time 5 Push the MENU button to go back to TIME then push the UP or DOWN button to scroll between TIME and EVENT 6 To exit push the MAIN menu button until you see the display screen Installing the DVR software 1 Insert the mini CD into a CD DVD ROM drive on your computer 2 I
14. be used to set the time Camera Setup allows you to choose which channels will be active when the cameras are plugged into the DVR When a camera is set to OFF in Camera Setup you will not be able to view the display for that camera You will also not be able to record unless the camera is set to ON in Camera Setup 1 Use the UP DOWN LEFT and RIGHT buttons on the remote i or the UP DOWN RWD for left amp FWD for right buttons to select the camera you would like to change settings on 2 Push the SELECT button to change the setting to ON or OFF 3 To exit the Camera Setup screen push the MENU button Record Setup allows you to choose which cameras will be recording when the record button is pushed Make sure all cameras are set to ON in the Camera Setup screen to enable Record 1 Use the UP DOWN LEFT and RIGHT buttons on the remote or the UP DOWN RWD for left amp FWD for right buttons to select the camera you would like to change settings on 2 Push the SELECT button to change the setting to ON or OFF 3 To exit the Record Setup screen push the MENU button Record Framerate allows you to set each cameras desired framerate The maximum no of frames is 50FPS PAL systems and 60FPS NTSC systems shared between 4 cameras 1 Use the UP DOWN LEFT and RIGHT buttons on the remote or the UP DOWN RWD for left amp FWD for right buttons to select the camera you would like t
15. blem My display is showing NO HARD DISK when i press record Solution If you have recently changed the hard drive in your DVR unit make sure it is plugged in properly otherwise the hard drive may be faulty Try connecting another working hard drive to the DVR if this still doesn t work then the DVR maybe faulty We suggest you return the DVR to the retailer Problem am not getting picture on any of my displays Solution Make sure the cameras are connected properly to the DVR and the power supply 12V 1A Check that the cables are not faulty by connecting the cameras directly to the DVR or to a TV if you have the proper adapters Problem One of the displays is not showing on my screen Solution Make sure all cameras are set to ON in CAMERA SETUP Make sure you don t have the HIDDEN CHANNEL function in MISCELLANEOUS SETUP on for one of the cameras Problem cannot login to my DVR remotely using the DxClient software or the Internet Ex plorer browser Solution Make sure you have configured the IP ActiveX and USER SETUP correctly Remember the SYSTEM PASSWORD is different to the ADMIN PASSWORD The ADMIN PASSWORD is used to login to the DVR remotely Problem cannot perform a backup Solution Make sure the DVR is connected to a PC using the USB cable Make sure the USB cable is connected properly to the DVR and PC Avoid having both the network cable and USB cable connected to the DVR at the same time Video
16. do not allow limitations on certain exclusions in this warranty Where applicable by local laws regulations and legal rights will take precedence ee Communications 2009
17. er a sub menu 5 Channel 1 2 3 amp 4 6 DC power 7 Grounding Terminal Remote Control f 1 0 9 digit key pad Buttons 1 4 can be used to view channels 1 4 in indi vidual display mode during recording and playback 0 9 can be used for a password 0 9 can be used in NETWORK SETUP to change digits Note cannot be used to set the time or input the time in time search 2 ALL Press to activate the entire screen for motion detection in MOTION DETECTOR SETUP 3 LEFT arrow Move cursor left in menus 4 REWIND RWD Press to rewind a recording during playback 5 RECORD Press to begin recording Note will not function if the cameras are not activated in CAMERA SETUP AND RECORD SETUP 6 MENU Used to enter the main menu or exit a sub menu 7 UP arrow Move cursor up in menus 8 SELECT SEL Press to select an option enter a sub menu 9 RIGHT arrow Press to move cursor right 10 DOWN arrow Press to move cursor down 11 Mute Press to mute audio output 12 PLAY Press to begin playing most recent recording during playback 13 FAST FORWARD FWD Press to fast forward a recording 14 STOP Press to stop a recording 15 Pause Press to pause a recording During display mode press to activate sequence mode SEQ DWELL TIME must be set Connecting Cameras to the DVR Cameras and accessories optional 1 Connect the power and BNC ends of the secu
18. f your CD DVD ROM drive does not auto run the CD click MY COMPUTER click on the drive the CD is in and double click on the DXCLIENT2 7 1 ENG EXE file SF een mee Fis ba CS SRB Applica OT A Pin Current 3 In the setup window click INSTALL DxClient 2 7 1 Setup _ Choose Install Location Choose the folder in which to install Gclient 2 7 1 Mullsore Install System v2 40 Installing DVR Software continued 4 Follow the instructions in the setup wizard and click NEXT DxClient 2 7 1 Setup Welcome to the DxClient 2 7 1 Setup Wizard This wizard will guide you through the installation of Dx Client Zl It is recommended that you close all other applications before starting Setup This will make it possible to update relevant system Files withouk having to reboot your computer Click Next bo continue 5 The installation is now complete Tick the checkbox to run the DXCLIENT and click FINISH DxClient 2 7 1 Setup Completing the DxClient 2 7 1 Setup Wizard Dx Client 2 7 1 has been installed on your computer Click Finish to clase this wizard W Run DxClient 2 7 1 Back Cancel Configuring ActiveX You may need to change the security settings on your PC to be able to view the DVR remotely If you are having trouble viewing your DVR remotely and are getting messages regarding active X controls the following instructions may help Cha
19. ftware you can browse through all the recordings remotely and play them back on your PC 1 Click the EVENT LIST button on the left of the control panel on the DXClient software 2 The EVENT LIST window will now be open lowthent Record Lect List xj Use the arrows on the sidebar to scroll the list ye Event Count 0 3 Select the recording you would like to view and click it so that it is highlighted E from 2009 08 24 09 4111 3 Sensor fherording 4 Click the PLAYBACK button on the bottom left of the imom SOOWEW SS MiZE 14 r d J fencer Mre onlin Event List window froth SOO ORS 15334133 5 The video will now begin playing Push STOP to end L LA LuRe cea playback G senser Recording fom Sra eyes Whi F Senter Rerardling iom 2008 06 23 15 20 18 E Normal Reearainny of frit POOR 11nd HDD Viewer continued Search Time You can also search the recordings by going to a specific time and date If you have a certain date and time you would like to playback footage from you can use the Search Time function to do this 1 Click on the Search Time button Note the DVR must be in Netviewer mode connected to a PC using a network cable for the Search Time button to be active Mi the date and time you would like to see footage xj The DVR will playback your search from the time you input If there is no recording for the time you input nothing will happen Please input search time 2009
20. le Software CD Network cable USB cable RCA Video Cable m RCA to BNC adapters X 4 m Security Stickers 4 Pack If you are missing any of the components above contact Swann Communications for assistance 10 11 1 Rewind Press to rewind a recording press to move cursor left 2 Pause Press to pause a record ing During display mode press to activate sequence mode SEQ DWELL TIME must be set 3 Play Press to begin playing most recent recording 4 Fast foward Press to fast forward a recording press to move cursor right 5 Stop Press to stop a recording 6 Record Press to begin record ing Back Panel 1 Audio Output 2 Audio Input 3 LAN socket 4 Video Output 12 13 14 Note will not function if the cameras are not activated in CAMERA SETUP AND RECORD SETUP 7 Hard drive indicator Lights when hard drive is active flashes when recording searching etc 8 Infra red sensor 9 Power Indicator Lights on when DVR powered 10 Channel 1 Press to view channel 1 11 Channel 2 Press to view channel 2 15 1617 18 12 Channel 3 Press to view channel 3 13 Channel 4 Press to view channel 4 14 Quad Mode Press to view all channels in quad mode 15 Up arrow Move cursor up in menus 16 Menu ESC Used to enter the main menu or exit a sub menu 17 Down Press to move cursor down 18 Select Edit Press to select an option ent
21. nging Security Settings on Internet Explorer 1 Open Internet Explorer 3 In INTERNET OPTIONS click on the SECURITY tab at the top 2 Click TOOLS gt INTERNET OPTIONS a ae mb ee ey ee ey ie ieee Internet TER z 2 Sa ETT E EE itt samy reach eect carenar resins Ai T Beer iisang i Hime pae Ju lista i Ai Tocas home page Labi type each adden anit reen ine Hean Ad er eR Ee ERY a ae Top ee ee 4 Select the INTERNET zone option 5 Click on the CUSTOM LEVEL button General Securty privacy Content Connections Programa advances Ore ASEA IEA mania ick Corsham krel To tne thw recommenced settings ick Cee nal evel e CN Laa miat Tiad e Beatrice _ Pieper all zones to chef mull brend j Cuber 6 Find the the following three options and SET them to 7 After you have changed the settings you wil be asked PROMPT to confirm the changes Click YES Download signed ActiveX controls Download unsigned ActiveX controls Initialize and script Activex controls not marked as safe for scripting Se 6 Set the next two options to ENABLE gt an Run ActiveX controls and plug ins Set ee A mo Script ActiveX controls marked safe for scripting Phe current wcurty attira val put your comyeter at rnb Click OK after you have made the changes me IP Allocation DHCP Setup 1 In the NETWORK SETUP sub menu go to IP ALLOCATION and press SELECT to choose DHCP Note
22. o change set tings on 2 Push the SELECT button to increase the number of FRAMES PER SECOND and the STOP button to decrease the number of FPS 3 To exit the Record Setup screen push the MENU button The video quality for all the cameras can be adjusted in the MAIN menu 1 In the MAIN menu scroll down to VIDEO QUALITY MAI WER 2 Push the SELECT button to scroll between LOW NORMAL CAMERA SETUP HIGH and HIGHEST RECORD FEANERATE VIDEO QUALITY RECORD SCHEDULE 3 Push the MAIN menu button once you have selected the quality Sue HAAG Seve level to update the changes MISCELLANEOUS SETI Record Schedule allows you to set the DVR to record between specified times or set to record when motion is detected The timeline in the Record Schedule screen shows 24 bars representing 24 hours in a day 1 Use the LEFT and RIGHT buttons on the remote or the RWD for left amp FWD for right buttons to select the hour you would like to change the settings on 2 Push the SELECT button to scroll between each bar hour NO RECORD white bar L NORMAL RECORD red bar ij RO EECOED SENSOR RECORD white bar with red S ROEMAL RECORD SERSO 3 To exit the Record Schedule screen push the MENU button Sensored Record Time The DVR can be set to continue recording after it has detected motion 1 Use the UP amp DOWN buttons to scroll between each option Push the SELECT button to choose between 5 10 15 20 25 amp
23. of law enforcement officers conducted under lawful authority no person shall use either directly or indirectly a device operated pursu ant to the provisions of this Part for the purpose of overhearing or recording the private conversations of others unless such use is authorized by all of the parties engaging in the conversation WARNING Modifications not approved by the party responsible tor compliance could void user s authority to operate the equipment IMPORTANT SAFETY INSTRUCTIONS Make sure product is fixed correctly and stable if fastened in place Do not operate if wires and terminals are exposed Do not cover vents on the side or back of the DVR and allow adequate space for ventilation Before You Begin Contents Package Contents DVR Layout Remote Control Connecting Cameras to the DVR Starting the DVR Main Menu Hard drive Setup Setting the Time Camera Setup Record Setup Record Framerate Video Quality Record Schedule Sensor Setup Motion Detector Setup System Password Image Parameters Miscellaneous Setup Recording Playback Installing DVR Software Playback Configuring ActiveX IP Setup User Set Up DxClient DxClient Layout Netviewer HDD Viewer HDD Viewer continued Installing and changing the HDD Troubleshooting Warranty Information OoOUUON AU PW N Package Contents m DVR4 1160 Unit m Remote Control Operating Instructions Easy Setup Guide Power Adapter with Cab
24. on the top left corner on the display the audio is aasigned to See AUDIO PORT SETUP on page 17 to configure this setting Indicates the audio port is assigned to a channel and the audio port is on f Indicates the audio port is off Indicates the audio port is currently recording and audio output is on Note Pushing the DOWN button on the front panel or the MUTE button on the remote will mute the audio output The audio inout can still be recorded while the output is muted 3 Channel The number on the top left corner of each display indicates the the channel 4 Record mode This indicates which record schedule the DVR is set to a A REC Current record schedule is set to NORMAL RECORD mode b S REC Current record schedule is set to SENSOR RECORD mode c N REC Current record schedule is set to NO RECORD mode 5 Hard drive information This shows which hard drive is been recorded to and the percentage currently used M indicates MASTER HDD S indicates SLAVE HDD and 75 indicates 75 percent of the hard drive is full 6 Date amp Time stamp Current date and time Recording and stopping a recording 1 Push the RECORD button in the diplay mode quad or individual view to begin recording 2 Push the STOP button to stop the recording Note If the password is currently enabled you will be prompted for the password only the correct password will allow you to stop the recording Playback Playback Screen The Se
25. ou can scroll through the sub menus by using the UP amp DOWN buttons on the DVR front panel or the remote control The red arrow indicates the sub menu or option that is currently selected See page 4 for DVR functions and page 5 for remote control functions MAIN MENU CAMERA SETUP RECORD SETUP RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SENSOR SETUP ee eo MISCELLANEOUS SETUP NETWORK SETUP LANGUAGE ENGLISH RESET MENU i Fi HUY F Overwrite enabled Set to ON to enable the hard drive to overwrite the oldest files when the hard drive is full When it is set to OFF the DVR will stop recording once the hard drive has reached full capacity Master HDD size Total size of the hard drive installed in the DVR Master HDD used Amount of disc space and the percentage currently used up on the hard drive HDD format Select this option to format the hard drive then push the SELECT button The DVR date and time stamp appear on the bottom right corner of the screen Follow these instructions to set change the DVR date and time 1 Select the MISCELLANEOUS SETUP option in the main menu 2 Scroll down to the second option SET TIME and push SELECT 3 Below the date and time digits you will see a red arrow Use the LEFT and RIGHT buttons on the remote or the FWD and RWD buttons on the front panel to move across 4 Push the SELECT button to change the data Note The 0 9 buttons on the remote cannot
26. rate during HDD viewer recordings will be saved button 4 LANGUAGE SELECT this cannot be changed when you push the STREAM CAPTURING mode 8 SAVE click to SAVE changes only default language English is avail able on this software version 9 CANCEL Click to cancel changes 5 NORMAL WINDOW AT STARTUP DxuClient Configuration yg X 1 EMF Capture Setting 2 BMP Screen Capture Folder click to change BMP Folder C Program Files DsClient Capture 3 e No Additional Info on BMP image click to change Record Configuration Setting 4 h i stream recording folder click to change W Folder C Program Files D Clientt Capture Language Select JEnolish Detault Miscellaneous Setting 5 n Normal window at Start up click to change 6 Normal playback at start up click to change 7 te Hide Channel Frame Rate on Screen click to change o _ Save Cancel 9 HDD Viewer continued Backup The DVR allows you to backup all your recordings onto your hard drive The backup format is a MCG file which can be played back on the DxClient you can select where you would like the MCG file saved it only allows you to select the drive you would like to save the MCG file in Note make sure you have the DVR connected to your PC using the USB cable The network cable must not be connected for this to function 1 Click the BACK UP AVI button in the DxClient This will open the RECORD CONFIGURA
27. rity camera to an extension cable 2 Connect the DC end on the extension cables to the 4 way power splitter plugs 3 Connect the camera power supply to the other end of the power splitter 4 Connect the BNC end of the extension cables to the camera connections on the back of the DVR unit CH1 CH2 CH3 amp CH4 5 Connect the DVR power supply plug into the power supply socket on the back of the DVR 6 Plug in the camera power adapter and the DVR power adapter to mains power outlets Starting the DVR Once you have connected the DVR and switched the power on it will begin to boot up During boot up you will see the following screens CHECKING HDD MASTER ST3250310SV V2 6 G V MLANG 2009 XX XX SEAE Pace NONE This third screen will only show on first boot up or after a new hard drive has been installed Push SELECT to format the hard drive or MENU to cancel the format and continue with the start up CHECKING HDD MASTER ST3250310SV FORMAT HDD CONFIRM SELECT FORMAT MENU CANCEL Once the DVR has booted up and you have a camera connected to each channel you should be able to see a quad screen showing all four displays below 1 2 3 1 Displays showing cameras 1 and 3 2 Audio icon in this case audio in ac tive on camera 1 3 Displays showing cameras 2 and 4 4 Date stamp year month day 5 Time stamp hour minutes seconds a To access the main menu push the MENU button Y
28. sword and OFF to disable it 4 Push the MENU button to go back to the MAIN menu Changing the password 1 Select the MISCELLANEOUS SETUP option in the Main menu 2 Select the first option CHANGE PASSWORD 3 Key in the current password in the first blank field 4 n the second field key in the new password Any of the but tons except for the MENU button on the remote control or the DVR front panel can be used to make a password 5 Confirm the new password by re entering it in the third blank field The default system password for the DVR is 111111 Note the System Password is different to the Admin Password See User Setup for informa tion on setting up the Admin Password In the IMAGE PARAMETERS screen you can change the picture settings Contrast Brightness Hue and Saturation for each camera Each setting can be set from 0 100 1 In the MISCELLANEOUS SETUP screen scroll down to IMAGE PARAMETERS 2 Push the FWD button on the DVR front panel or the RIGHT button on the remote to choose the camera you would like to adjust settings for 3 Push SELECT to enter the settings screen for the selected channel 4 Use the UP and DOWN buttons to select between CON Contrast adjust the brightness ratio of the lightest to the darkest part of the screen image BRI Brightness adjust the brightness level of the overall screen image HUE Hue adjust the gradation of each colour SAT Saturation
29. tage and then convert it into an AVI file This enables you to playback the recording on other meida players such as VLC DivX or Windows Media player 1 Click the DVR Settings button This will open a HDD viewer DXCLIENT CONFIGURATION window 2009 00 24 095203 Hey Loe Ro et Pa my 2 Click on AVI STREAM RECORDING FOLDER button to on EE ARCA AT select the location you want the AVI file to be saved on 4 Hereanll ean E AM stream recording folder click to change AMY Folder C Program Files 0 Clent Capture eh Language Select 3 Select the folder you want the AVI file to be saved on EE SS we Click OK Then click SAVE on the DxClient CONFIGURA Select AV Strear Capture Fokder TION window i Mr Cesare H OC Cerf E Ge Liter Fiai H L Dreri CU ray Pees Netviewer continued 1 Click the BACK UP AVI button in the DxCli ent This will begin Stream Capturing and open a mini display 2 Click the REVIEW AND CONVERT button when you want the capture to end below the Stream Capturing mini display shows the time of the current ers capture the maximum time allowed to capture and below that the number of frames currently captured The maximum capture time is 900 seconds m 6 seconds 900 seconds max 33 frames captured Review amp Convert Discard 3 In this window you can view the footage you Adjust Startfend of Stream have captured before converting to AVI and press Varela AMT
30. the next five options will now show 0 0 0 0 2 Push the MENU button to go back to the Main menu 3 Turn the power off or unplug the power cable from the back of the DVR to reboot it 4 Once the DVR has rebooted go back to the NETWORK SETUP sub menu You should now have a complete IP ADDRESS SUBNET MASK GATEWAY and DNS1 ADDRESS Static IP Setup DVR unit We strongly recommend only advanced users with network knowledge setup the DVR using a Static IP address User Setup In the USER SETUP screen you can assign the DVR an Admin ID and an Admin Password These are needed for access ing your DVR remotely The Admin ID and Password can be up to 14 charaters long You can also set a USER ID and PASSWORD This allows others to view your cameras remotely with restrictions The default ADMIN ID is ADMIN The default PASSWORD is 111111 1 Go to the NETWORK SETUP screen and scroll down to USER SETUP 2 Select Admin ID and push SELECT 3 Use the UP and DOWN buttons to scroll through the charac ters and then push the SELECT button to select that character 4 Use the LEFT and RIGHT buttons on the remote or the RWD and FWD buttons on the front panel to move across to the next character in your password 5 Repeat steps 3 and 4 to change the ADMIN PASSWORD USER ID and USER PASSWORD 6 Reboot the DVR for the changes to take affect Note We highly recommend you change the admin password if connecting
31. to a network router as this DVR is viewable over the internet and can be easily found using google search Viewing Remotely Now that you have configured the DVR and your PC you can view your DVR over the internet The DVR can be viewed remotely over the internet using the DVR software on the CD included with the DVR or using a web browser preferably Internet Explorer Using Internet Explorer 1 Open up Internet Explorer If you do not have Internet P Dacie Setviemer Windows Internet Explorer Explorer you can download it from the Microsoft website Wwww microsoft com 2 In the address bar type HTTP followed by your IP ADDRESS and a colon then your HTTP PORT eg HTTP 192 168 1 100 80 and push ENTER See DHCP setup to find your IP address and HTTP port 3 You will now see a login window See LOGIN for further instructions Opening DxClient PC viewer 1 On your PC click on START gt ALL FR SAP Business One PROGRAMS PROGRAMS All Programs 2 Find DXCLIENT and click DXCLIENT in 1 the DXCLIENT folder Start Tr B Do DB 2 W meme epo O mdn O O O O O Barcodes O Master 5 3 The DxClient program should now be open with a blank screen Click on the large NET button Note the DVR must be connected through a network using the network cable Note if you are trying to access your DVR from a location outside of your network you will need to know your PUBLIC IP ADDRESS If
32. urrent time in Melbourne Australia compared to your local time Swann Communications USA Inc Swann Communications PTY LTD 12636 Clark Street Building 4 650 Church Street Santa Fe Springs CA 90670 Richmond Victoria 3121 USA Australia Swann Communications warrants this product against defects in workmanship and material for a period of one I year from it s original purchase date You must present your receipt as proof of date of purchase for warranty validation Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann The end user is responsible for all freight charges incurred to send the product to Swann s repair centres The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin The warranty does not cover any incidental accidental or consequential damages arising from the use of or the inability to use this product Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are the responsibility of the end user This warranty applies to the original purchaser of the product only and is not transferable to any third party Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties void By law some countries
Download Pdf Manuals
Related Search