iHome iP41BRE
Contents
1. Using the iP41 Charging your iPhone iPod Note Please make sure you are using the correct inset for your iPhone iPod see Install iPhone iPod Insert and that it is properly docked into the iP41 Failure to do so may damage your iPhone iPod While your iPhone iPod is docked in the unit and the unit is connected to AC power it recharges until fully charged Listening to iPhone iPod 1 Dock the already playing iPhone iPod the iP41 will automatically turn on and you will hear the music playing from your iPhone iPod Note If the volume is too low on the iPhone iPod iP41 may not detect iPhone iPod is in play mode Press the Power Button on the main unit once or gt Play Pause Button to play it 2 When the iPhone iPod is docked and in standby mode press the Button on main unit to play it The iPod icon E will appear on the display indicating iPod mode Press the gt t Button to pause play press again to resume it Press the and Button to adjust the system volume 5 Press or Button on remote control to go to the next or previous track Press and hold while track is playing for high speed forward or reverse music search of the current track 6 You can rotate the unit for viewing video the iP41 display also will change to fit your view orientation too 7 To turn off the unit press the Button on the main unit or remote control Your iPhone iPod will continue charging while in the dock Listening to non do2. damage the surface of the unit FCC Information This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules These limits provide reasonable protection against radio and TV interference in a residential area However your equipment might cause TV or radio interference even when it is operating properly To eliminate interference you can try one or more of the following corrective measures e Reorient or relocate the receiving antenna e Increase the distance between the equipment and the radio or TV e Use outlets on different electrical circuits for the equipment and the radio or TV e Consult your dealer or an experienced radio television technician if the problem still exists Modifying or tampering with your system s internal components can cause a malfunction and might invalidate the system s warranty and void your FCC authorization to operate it This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada iIP41 Quick start 1 AC power 2 inserts amp cradles 3 iPhone iPod Select the dock insert for your iPhone iP
3. EXB bass effect Sound is distorted Sound source is distorted If iPod original sound source is poor quality distortion and noise are easily noticed with high power speakers charge up Try a difference audio source such as a music CD If you are using an iPod Shuffle or extemal sound source like older generation iPod try reducing the output volume on the device itself Also try turning bass boost OFF Remote control battery is weak dead Replace remote battery with new CR2032 battery Remote Control didn t work Remote Control is too far way from Use the Remote Control closer to main unit main unit Limited 1 Year Warranty Information iHome Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one year from the date of original ourchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 10 00 charge for handling packing return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product
4. Model P41 Alarm Clock for iPhone iPod Questions Visit www ihomeaudio com Table of Contents EEL EE E E E E ANE E ee E N A A E E EE A EE T E ET 1 Controls and Indicators iP41 Display cccccccccccccceeeeeeeeeeeeeeeeeeeeeeeeaaeeaaaaaaaaaaeaaesaaseaseeeeeeeeeeseeeeeeeeeeseeeseeseneesees 2 Gening SURE apes sek asa ge cnc ccs da rtine nc pane Seer detec ae Sonics owe guna pdusedeeeecatan A ET 3 USMO TNE IPA aac ened E ERE E nee amas zene deewe E AS 4 6 Using the Optional Remote Control ccccccecccssececeeeeeeeececeeeeeeeeeeeeeeeeeeeeaaaeeaaaaaaaaaeaeeeseeeeeeeseeeeeeeseeeeeeeeseeeeeeess 7 Install Replace the Remote Control Battery ccccccccccccceecceeeeeeeeeeeeeseeeeeeaaaeaaaaaaaaaeaeeesedeeeeseseeeeeeeeseeeeeeeeeeeeeeeees 7 A Consumer Guide to Product Safety cccccssseeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesaeeesaaaaaaaeagsaeaceseeeeseeeeessees 8 TroubDl sShooting oars acne ea ein a cbc tent ea tesa eee sng csi foe eden EEE aa 9 Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzine thinner or similar materials can
5. attery Low Indicator DST Indicator a Display in iPhone iPod Mode Display in Movie Mode product is upright product is sideways Getting Started Thank you for purchasing the iHome iP41 Alarm Clock for your iPhone iPod Designed specifically to work with your iPhone or iPod Touch this system provides high quality audio performance and lets you enjoy videos in horizontal view Please read this instruction carefully before the appliance is operated and keep it for future reference Install iPhone iPod Insert amp Cradle Your iP41 comes with two cradles for support when viewing videos in horizontal mode and three inserts to ensure your iPhone iPod fits properly in the dock To place a cradle 1 Select the small iPhone iPod touch cradle for use with those models or the taller nano cradle for use with nano 4G 2 Press cradle into the vertical cradle slot on the unit near the dock To place an insert 1 Select the insert for your iPhone iPod see table on page 1 2 Gently press the iPhone iPod insert into the dock 3 Carefully place your iPhone iPod into the dock The iPhone iPod must not be in a case or skin Install AC Adaptor Connect the AC adaptor cable plug into the jack on the back of the system then plug the AC adaptor into the wall outlet Install Replace backup Battery The iP41 uses a CR2082 battery for backup battery system to provide continuous alarm operation and clock settings in the e
6. cking iPod or other portable audio devices If you are using an iPod without a docking port or other MP3 player or other portable audio device you can play it through the iP41 via the Aux in Jack 1 Plug one end of an audio patch cord available at www ihome com into the headphone or line out jack on your device and the other end of the patch cord into the Aux in Jack located on the back of the unit 2 Press the amp Button to turn the iP41 on 3 Press the or q Button on the main unit or on the remote control to adjust the system volume You may need to adjust your device volume too 4 To turn off the unit press the Button Please remember to turn off your device too Watching Videos iPhone and iPod models with Horizontal Video Mode Make sure you have installed the correct cradle for your iPhone iPod touch or nano 4G model 1 Gently turn the unit with docked iPhone or iPod on its left side The clock display will adjust to the new orientation 2 Select a video file on your iPhone iPod and press play 3 Press Play on the iP41 if needed to turn unit on Using the iP41 Using Sleep Mode Press the Sleep Button while your iPhone iPod is playing to enter sleep mode and continue to press to step through the available sleep times 90 60 30 and 15 OFF will cancel sleep mode A sleep icon will appear on the display The iP41 will play for the number of minutes set growing gradually softer until shutting off the unit and t
7. e iPod s please visit shuffle and repeat modes www ihomeaudio com The snooze button works exactly same as on main unit Install Replace the Remote Control Battery Install Replace the Remote Control Battery for models with remote control To order a remote control visit www ihomeaudio com The remote control battery is already installed at the factory When the remote control stops operating or its range seems reduced replace the battery with a new one 1 The battery door is located on the back end of the unit 2 Slide the battery door to release the battery door latch and remove the battery door 3 Insert a CR2032 3 volt lithium battery Make sure the polarity the and side of the battery is correct Battery Compartment 4 Replace the battery compartment door back in the remote control NOTE PLEASE DISCARD BATTERIES PROPERLY A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to assure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use Keep these instructions handy for future reference Take special note and adhere to all warnings on the unit and in the instruction and service manual 1 Water and Moisture Ihe unit should not be used near water For example near a bat
8. emem ber to set the correct AM or PM An icon below the time digits is the PM Indicator 3 Press the Clock Adj Button again or no button within 10 seconds to exit the clock setting mode Using the Alarm Setting the Alarm 1 Press and hold the Alarm Button until the alarm time flashes Press the Hour and or Minute Button to set the alarm time Hold the button for a few seconds to adjust rapidly Remember to set the correct AM or PM 2 The alarm will automatically arm after set alarm time and the alarm icon will stay on to indicate alarm is armed 3 Default alarm sound is iPhone iPod but if no iPhone iPod is docked or iPhone iPod cannot play for some reason or the playing sound level is too low it will automatically switch to buzzer alarm Arming and Disarming Alarm Turn Alarm Function On and Off 1 Once alarm is armed press the Alarm Button to disarm it 2 Press the button again to arm the alarm again Resetting the Alarm to Come on the Next Day When the alarm is sounding press the Alarm Reset Power Button to stop the alarm and reset it to come on the following day at the same time Snooze Press the Snooze Dimmer Button after the alarm sounds The alarm will be silenced and come on again about 9 minutes later Snooze can be pressed several times during the 1 hour alarm cycle Sure Alarm The iP41 has a sure alarm feature so if a backup battery is installed the buzzer alarm will still sound in the event of power failure
9. he iPhone iPod at the set time Press or Button to set sleep volume Note that sleep volume is separate from normal alarm volume setting Using Dimmer Press the Snooze Dimmer Button during normal operation to adjust the brightness of the LCD display to high medium low or off Using the EXB effect Slide the EXB Switch at the back of the unit to the ON position to enable the EXB sound enhancement circuitry designed to provide bigger bass sound Slide to OFF to cancel the effect Using The Optional Remote Control Unit O Power Button turns unit ON and OFF Volume Buttons raise and lower volume on the unit Pressing FWD REV while iPhone iPod is inserted will FWD REV to next previous track Pressing and holding FWD REV while iPhone iPod is docked will scan forward reverse within currently playing track Pressing Play Pause from power off mode will play iPhone iPod OW DAC IC Ow Co Pressing Play Pause while iPhone iPod is docked and playing will pause iPhone iPod Press again to resume play A k Pressing the mute button will mute the unit While unit is muted the volume display will flash Pressing mute again or volume up or down will unmute TEE G The up down fwd rev menu and enter buttons are used for wv 3 O N M with all iP41 iPhone iPod menu navigation models To order a remote The shuffle and repeat buttons will activate deactivate the iPhon
10. htub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool etc 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat source such as radiators heat register stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cord Protection Power supply cord should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet 6 Cleaning The unit should be cleaned only as recommended by the manufacturer 7 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall outlet and disconnect the antenna o
11. od model from the table below and place insert in dock Never dock an iPhone iPod LENN ze EAO CEG Vo JE E without the proper insert in Insert iPhone iPod into dock back of the iP41 and plug the other place Insert the short cradle for Phong iPod must not be in a skin end into a wall socket to play and your iPhone or iPod touch or tall iIPh iP ill ch charge iPhone iPod cradle for nano 4G into the slot e e a E next to the dock while docked Press the Play Button on the iP41 to play your iPhone iPod wo iPod touch 2G iPod nano 4G Use this insert insert 16 insert 17 For this iPhone iPod POET ee iPod nano 4G NOTE If you do not have an insert for your iPhone iPod please visit www ihomeaudio com or call iHome toll free at 800 288 2792 to purchase one Gently pivot unit to the left until it lies flat The clock display will adjust to the new onentation Select your video and press the Play Button on the iP41 to play your video Controls and Indicators Hour Button Minute Button Alarm Button Alarm Reset Power Button Dock iPhone iPod cradle in slot Snooze Dimmer Button Play Pause Button Sleep Button Volume Button Volume Button DST Switch Expanded Bass Effect Switch Aux in Jack Clock Adjust Button eee Back Panel IP41 Display Time Display D dd V A Alarm Indicator Sleep Indicator Q nmmn Cy nmam cw i PM Indicator iPod iPhone Indicator T K4 B
12. of the unit Wall outlet is not functioning Plug another device into a wall outlet Same outlet to confirm the outlet is working iPhone iPod does Using wrong insert no insert Make sure the dock insert is the proper fit to your iPhone iPod not dock properly dock or iPhone iPod has obstruction Remove your iPhone iPod from the dock and check for obstruction on the connectors in the dock and on your iPhone iPod Then reseat it in the dock no power iPhone iPod does iPhone iPod is not docked properly Remove your iPhone iPod from the dock and check for obstruction not respond to the on the connectors in the dock and on your iPhone iPod Then unit reseat it in the dock Your iPhone iPod software is too old Upgrade software on your iPhone iPod via iTunes iPhone iPod is locked up Please make sure your iPhone iPod is working propery before docking with the unit Please refer to your iPod manual for details iPhone iPod didn t iPhone iPod is not docked properly Remove your iPhone iPod from the dock and check for obstruction on the connectors in the dock and on your iPod Then reseat it in the dock Using 3 generation iPod iP41 doesn t support 3 generation iPod iPhone iPod is locked up frozen Please make sure your iPhone iPod is working properly before docking with the unit Please refer to your iPod manual or iPhone iPod battery has problem apple conYsupport for details ae Volume level is set too high Decrease the volume Turn off
13. r cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or plug has been damaged B Objects have fallen into or liquid has been spilled into the enclosure C The unit has been exposed to rain D The unit has been dropped or the enclosure damaged E The unit exhibits a marked change in performance or does not operate normally 12 Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cord should be unplugged and take out batteries from the unit to prevent damage or corrosion 13 Servicing The user should not attempt to service the unit beyond that described in the user s operating instructions All other servicing should be referred to qualified service personnel 8 Troubleshooting Symptom PossibleProbiem SC Solution C Unit no respond AC adaptor isn t plugged to a wall Plug the AC adaptor into a wall outlet and plug the connector into outlet or the connector is not plugged the supply jack on the unit into the power supply jack o the back
14. the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI Technologies or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product 2009 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com For any other questions 1 800 288 2792 Toll Free IP41 040309 0 Printed in China
15. to the Factory Service Center listed below The product must include proof of purchase including date of purchase The fee for service without proof of purchase is 25 00 Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 3 Enclose a check or money order payable to the order of SDI Technologies for the sum of 10 00 25 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Drive El Paso TX 79936 6420 Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to
16. vent of a power failure If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected the display backlight will not remain lit but Current time and alarm time settings will be temporarily maintained Otherwise you must reset the time and alarm settings 1 Please make sure the AC adaptor is connected Otherwise all settings may be lost during battery replacement 2 Open backup battery compartment door located on the back of the unit 3 Insert anew CR2032 battery checking that the polarity and ends of the battery matches the drawing near the battery compartment Close the compartment door WARNING Lithium batteries can explode or cause burns if disassembled shorted recharged exposed to water fire or high temperatures Do not place loose batteries in a pocket purse or other container containing metal objects mix with used or other battery types or store with hazardous or combustible materials Store in cool dry ventilated area Follow applicable laws and regulations for transport and disposal Using the iP41 Setting Clock 1 Set the DST Switch located on the back of the unit to 1 to add one hour or to 1 to subtract an hour When set to 1 the DST icon will appear 2 Press and hold the Clock Adj Button located on the back of the unit until the display flashes Press the Hour and or Minute Button to set the time Hold the button for a few seconds to adjust rapidly R
Download Pdf Manuals
Related Search