ONKYO DS-A3
Contents
1. buttons and SELECT button to select a video and press the SELECT button to start playback When selecting videos use the MENU button to go back to the previous menu Resume Function With the Resume function you can resume playback of the song video that was playing when you removed your iPod from the RI Dock or changed the OSD mode to Off 1 Select and play a song video displayed on your TV 2 During playback or while playback is paused remove your iPod from the RI Dock or change the OSD mode to Off The current song video is remembered 3 When you reinsert your iPod into the RI Dock set the OSD mode to On press the RESUME button to resume playback of the remembered song video Notes The Resume function can be used only when the OSD mode is set to On e Ifthe AC adapter is disconnected the remembered song video will be forgot ten Ifthe Resume function is used during shuffle playback when the iPod is rein serted in the RI Dock playback will resume with any song video The Video Menu is properly displayed only when the language setting on the iPod is set to English Be sure to set the language to English before you use the Video Menu 13 Using the RI Dock Continued Setting the TV System European model only While the OSD mode is set to On you can set the RI Dock s video output to PAL or NTSC If the onscreen display looks distorted on your TV try changing the T2. Onkyo logo Off Nothing is displayed on your TV and you navigate and select your contents by using your iPod s display Notes To prevent dock connector damage don t twist your iPod when inserting or removing it and be careful not to knock over the RI Dock while your iPod is inserted Don t use the RI Dock with any other iPod accessories such as FM transmitters and microphones because they may cause a malfunction You can t change the OSD mode while watching an iPod slideshow or video Controlling Your iPod without the OSD To control your iPod without the OSD set the OSD mode to Off and use the remote control ler as explained on page 7 Controlling Your iPod with the OSD When the OSD modeis set to On and your iPod is inserted in the RI Dock you can navigate and select your music or video on your TV Using the RI Dock Continued Music Mode E Playing Songs SETUP MODE RESUME PLAYLIST ALBUM PAGEMODE PAGE VOLUME ole vy Press the remote controller s MENU but ton to select the Music mode Use the Up and Down arrow a Y but tons to select Playlists Artists Albums Genres Songs or Composers and then press the SELECT button gt Music gt Playlists Artists Albums Songs Genres Composers Shuffle Songs Top Menu Use the Up and Down arrow a buttons and SELECT button to select a song and press the SELECT button to start play
3. for personal use only recording copyrighted material is ille gal without the permission of the copyright holder 2 Care Occasionally you should dust the unit all over with a soft cloth For stubborn stains use a soft cloth dampened with a weak solution of mild detergent and water Dry the unit immedi ately afterwards with a clean cloth Don t use abrasive cloths thinners alcohol or other chem ical solvents because they may damage the fin ish or remove the panel lettering 3 Never Touch this Unit with Wet Hands Never handle this unit or its power cord while your hands are wet or damp If water or any other liq uid gets inside this unit have it checked by your Onkyo dealer For U S models FCC Information for User CAUTION The user changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equip ment NOTE This equipment has been tested and found to com ply with the limits for a Class B digital device pursu ant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular insta
4. nano 1st generation iPod photo iPod mini with Onkyo A V systems Q iPod Video Playback Q Resume Music and Video Playback Function Q Component Video Outputis supported by iPod nano 3rd generation and iPod classic at 480p or 576p Resolution and by iPod touch at 480i or 576i Resolution Q Onscreen Display to Show iPod s contents Q Dedicated Remote Control Supplied Q Gold Plated Audio Video Outputs QO Connectable with any Onkyo RI compatible A V Systems or Components Q Remote Control Operability via Onkyo s Remote Interactive RI System QO Recharging Function via AC Q Available in Black Only For the latest information on the RI Dock see the Onkyo Web site at www onkyo com jPod is a trademark of Apple Inc registered in the U S and other countries Getting Started cContinued Package Contents Make sure you have the following items DS A3 Remote Interactive Dock AC adapter Button type battery CR 2025 Instruction manual Compatible iPod models On these models the Video menu for the onscreen display OSD can be displayed ona TV connected to the RI Dock iPod touch 2nd generation iPod touch 1st generation iPod classic iPod nano 4th generation iPod nano 3rd generation iPod 5th generation iPod 4th generation iPod nano 2nd generation iPod nano 1st generation iPod photo iPod mini Note Before using the RI Dock update your iPo
5. software The AC adapter supplied with the RI Dock is designed exclusively for use with the RI Dock Do not use it with another device Likewise do not use any other AC adapter with the RI Dock Doing so may damage the RI Dock Ifthere s any noise when listening to an FM or AM radio station on your tuner or receiver try mov ing its antenna away from the RI Dock iPod and AC adapter s cable In addition don t wrap the AC adapter s cable around any other cables 18 MEMO ONKYO CORPORATION Sales amp Product Planning Div 2 1 Nisshin cho Neyagawa shi OSAKA 572 8540 JAPAN Tel 072 831 8023 Fax 072 831 8163 ONKYO U S A CORPORATION 18 Park Way Upper Saddle River N J 07458 U S A Tel 201 785 2600 Fax 201 785 2650 http Awww us onkyo com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6 82194 Groebenzell GERMANY Tel 49 8142 4401 0 Fax 49 8142 4401 555 http Awww eu onkyo com ONKYO EUROPE UK Office i Suite 1 Gregories Court Gregories Road Beaconsfield Buckinghamshire HP9 1HQ HOMEPAGE UNITED KINGDOM Tel 44 0 1494 681515 Fax 44 0 1494 680452 http www onkyo com ONKYO CHINA LIMITED Unit 1 amp 12 9 F Ever Gain PlazaTower 1 88 Container Port Road Kwai Chung N T HONG KONG Tel 852 2429 3118 Fax 852 2428 9039 D0901 2 http Awww ch onkyo com C Copyright 2009 ONKYO CORPORATION Japan All rights reserved 29344880A
6. within the product s enclosure TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE a A that may be of sufficient magnitude to constitute a risk of electric COVER OR BACK NO USER SERVICEABLE PARTS INSIDE Shack to persons REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions Read these instructions 14 Damage Requiring Service Keep these instructions Unplug the apparatus from the wall outlet and Heed all warnings refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is dam aged B If liquid has been spilled or objects have fallen into the apparatus Do not use this apparatus near water Clean only with dry cloth 1 2 3 4 Follow all instructions 5 6 7 Do not block any ventilation openings Install in accordance with the manufacturer s instruc C If the apparatus has been exposed to rain or tions water 8 Do not install near any heat sources such as radi D If the apparatus does not operate normally ators heat registers stoves or other apparatus by following the operating instructions including amplifiers that produce heat Adjust only those controls that are covered 9 Do not de
7. C adapter wi 0 Wall outlet N Supplied component video conversion cable VIDEO Yellow INPUT i amp orTV COMPONENT VIDEO IN amp or TV Tis Supplied RI cable RI D amp 1 Using the supplied AV cable connect the RI Dock s AUDIO OUT L R jacks to a suitable audio input on your amp And connect the RI Dock s VIDEO OUT jack to a video input on your Onkyo amp or TV If your Onkyo amp or TV has a component video input jack connect the RI Dock s COMPONENT VIDEO OUT jacks to a compo nent video input jack on your Onkyo amp or TV using the supplied Component Video Conversion Cable The input you use depends on the type of Onkyo amp you have See your amp s instruction manual for details 2 Using the supplied RI cable connect the RI Dock s R1 jack to an REI jack on one of the Onkyo components in your system 3 Connect the supplied AC adapter to the RI Dock s DC IN jack Note When the AC adapter is unplugged or not connected to the RI Dock the RI Dock will output no sound or video RI functions will not work and your iPod s battery will not be charged Caution Connect the supplied RI cable to i only Al jacks Do not connect headphones to the RI jack as it will damage your equip ment E If you ve connected the RI Dock s AUDIO OUT L R jacks to your amp s TAPE IN jacks and also want to connect the RI Dock s VIDEO OUT jack to you
8. Make sure the RI Dock s RI MODE switch setting and the remote control mode match this setting See your amp s manual for more information If you still can t control your iPod start playback by pressing your iPod s Play button Remote opera tion should then be possible Make sure your amp s remote controller is set to the correct remote control ID E The onscreen display doesn t appear on your TV Set the OSD mode to On see page 10 Try setting the TV system to PAL or NTSC see page 14 Select the video output mode composite compo nent according to the video input on your TV see page 10 E To watch an iPod slideshow or video on TV Set the OSD mode to Off and use your iPod s con trols or remote controller to select and start the slideshow or video 17 Specifications Power supply AC adapter 5 V DC Power consumption iPod not inserted North American model 0 8 W Other models 0 8W Weight 0 66 Ibs 300 g Dimensions W x H x D 4 5 16 x 2 1 8 x 4 7 16 inches 110x54x 112mm Connectors VIDEO OUT COMPONENT VIDEO AUDIO OUT L R RI jack Specifications and features are subject to change without notice In catalogs and on packaging the letter at the end of the product name indicates the color Specifications and operation are the same regardless of color The operating instructions in this manual apply to the iPod as of May 2008 and may change with future upgrades to the iPod
9. ONKYO Remote Interactive Dock Contents DS A 3 Important Safety Instructions 2 Precautions cccceeessseseeed Instruction Manual Getting Started About the RI Dock Features Package Contents Compatible iPod models Getting to Know the RI Dock Remote Controller Hooking Up the RI Dock Using the RI Dock 10 Setting the OSD Mode 10 Controlling Your iPod without the OSD 10 Controlling Your iPod with the OSD 10 MUSIG MOG eI nenE reer ere erer rect 11 VideoMo den ae e encccoe 13 Resume Function 13 Setting the TV System European model IAN o E A a OS 14 Thank you for purchasing an Onkyo product Other FUNCIONS eane eee a 14 Please read this manual carefully before making Setting the Remote Controller s ID 15 any connections or using this product By follow Using Your Amp s Remote Controller 16 ing these instructions you ll get the best audio performance and the most listening pleasure from your Onkyo product Keep this manual for Aira reierance Troubleshooting 17 Specifications dl iPod Enl TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT FISK OF ELECTRIC SHOCK i RISQUE DE CHOC ELECTRIQUE EXPOSE THIS APPARATUS TO RAIN OR MOISTURE The lightning flash with arrowhead symbol within an equilateral CAUTION triangle is intended to alert the user to the presence of uninsulated dangerous voltage
10. V system e While pressing and holding down the SETUP button press the VOLUME Up a button for more than 3 seconds to select NTSC or press the VOLUME Down y but ton for more than 3 seconds to select PAL Other Functions E RI Functions Depending on your amp and generation of iPod you may also be able to use the following functions Note Your amp may take several seconds to startup so you might not hear the first few seconds of the first song video e System On Function When you turn on your amp the iPod turns on as well With some amps you may need to press the ON button on your amp s remote controller s twice to turn on the other compo nents in your system e System Off Function When you turn off your amp the iPod turns off as well e Auto Power On Function If you start iPod playback while your amp is on Standby your amp will automatically turn on and select your iPod as the input source Then your iPod will start playback Direct Change Function If you start iPod playback while listening to another input source your amp will automati cally select your iPod as the input source Ifyou use your iPod s controls to start an iPod slideshow or video these functions will not work so use the remote con troller instead 14 e Timer Play You can use your amp s Timer function to turn on your amp and iPod and start playback at a specified time e Using Your Amp s R
11. back When selecting songs use the MENU button to go back to the previous menu E Using the Page Modes With the page modes you can quickly locate your favorite songs even when your song lists artist lists and so on are very long There are four page modes L M S and P These stand for Large Medium Small and Page In P mode you can page through the list consecutively In the S M and L modes you can page through the list in progressively larger steps 1 Use the PAGE MODE Up and Down a buttons to select a page mode Depending on the size of the list it may not be possible to change the page mode 2 Use the PAGE Up and Down a Y but tons to page up or down the list YNever Das na L First song on the next page First song on the previous page Page mode Note e While playing a playlist you can use the PLAYLIST Up and Down a buttons to select other playlists While playing an album you can use the ALBUM Up and Down a buttons to select other albums E Song Shuffle You can play all of the songs in your iPod in ran dom order e Press the MENU button repeatedly to select the music top menu and use the Up and Down arrow 4 Y buttons to select Shuffle Songs and then press the SELECT button 11 Using the RI Dock Continued E Now Playing During playback you can display information about the current song Press the MENU but
12. d to navigate songs videos and menus on the onscreen display and iPod While pressing the SETUP button they switch the video output mode between Composite mode and Component mode REPEAT button Sets the Repeat function to One All or Off 4 VOLUME a buttons Adjust the volume on the Onkyo amp or AV receiver They don t affect the iPod s volume setting Getting Started cContinued Replacing the Battery Use only a battery of the same type CR 2025 1 To open the battery compartment press the small hollow and slide open the cover 2 While pressing the tab as shown slide out the old battery Slide the new battery into the battery com partment with the positive side facing up Notes Ifthe remote controller doesn t work reli ably try replacing the battery If youintend not to use the remote con troller for a long time remove the battery to prevent damage from leakage or cor rosion An expired battery should be removed as soonas possible to prevent damage from leakage or corrosion p Caution Replacing the battery incorrectly may cause an explosion Use only a battery of the same type or an equivalent N Aiming the Remote Controller When using the remote controller point it toward the RI Dock s remote control sensor as shown below Remote control sensor RI Dock s Notes Ifthe RI Dockis placed on top of another compon
13. d with the latest software available from the Apple Web site at www apple com Getting Started cContinued Getting to Know the RI Dock iPod slot RI MODE switch Set it to match your amp s input display see below om RI COMPONENT veo OR L__LOCINSVISA RI jack VIDEO OUT jack COMPONENT VIDEO E Adjusting the iPod Adaptor ez Forward aA ackward DCIN 5V 1 5A jack AUDIO OUT L R jacks iPod adapter Dock connector Remote control sensor 4 A 3 P HDD_ DOCK Amp input OCK display TAPE TAPE oe i DOCK HDD OSD TAPE HDD DOCK RI MODE switch See your amp s instruction manual for details on changing the input display To control your iPod with your amp s remote controller select the matching remote control mode Amp remote controller s mode ee The iPod adapter needs to be adjusted to match your partic ular iPod Insert your iPod into the RI Dock If there s a gap between the back of your iPod and the adapter turn the adapter counterclockwise to close the gap Turning the adapter counterclockwise moves it forward Turning it clock wise moves it backward Getting Started cContinued Remote Controller SETUP MODE RESUME O OTe o S ARU voume M M ONKYO RC 729E Remove the plastic film before u
14. e iPod function Description TAPE mode HDD mode Turn on off STANDBY ON iPod is turned on and off Starts playback on the iPod If the iPod is not Play Play gt gt already on it s turned on automatically Pause Pause mm Stop I Pause ma Pauses iPod playback Next song gt gt gt gt Next gt gt Selects the next iPod song n F Restarts the current iPod song Press it twice to Previous song kaa lt lt Previous jea select the previous song Fast forward Fast Forward gt gt Press and hold to fast forward the iPod Rewind Rewind lt lt Press and hold to rewind the iPod To select the next or previous photo in an iPod photo slideshow use the controls on your iPod photo The following functions can be used with some Onkyo amps i Remote controller button to use Se iPod function Description TAPE mode HDD mode RANDOM PLAY Sets the iPod s Shuffle function to Songs ii DOLBY MODE MODE SHUFFLE Albums or Off Repeat REVERSE MODE REPEAT n the iPod s Repeat function to One All or Backlight REC DISPLAY SCROLL The iPod s backlight comes on for 30 seconds Next playlist PLAYLIST UP Selects the next playlist on the iPod Previous PLAYLIST DOWN Selects the previous playlist on the iPod playlist Next album ALBUM UP Selects the next album on the iPod i ALBUM DOWN Selects t
15. emote Controller You can use your amp s remote controller to control basic iPod functions see page 16 Operating Notes The RI Dock must be connected to your amp with both an RI cable and an audio cable to use the RI functions If your amp doesn t support the System On System Off Auto Power On and Direct Change functions you ll need to turn your amp on and off and select the input source manually Before you select another input source stop iPod playback to prevent your amp from selecting the iPod input source by mistake If any accessories are connected to your iPod your amp may not be able to select the input source properly e While your iPod is in the RI Dock its vol ume control has no effect If you adjust your iPod s volume control while it s in the RI Dock make sure it s not set too high before you reconnect your headphones J Using the RI Dock Continued E Using Your iPod s Alarm Clock You can use your iPod s Alarm Clock function to automatically turn on your iPod and amp at a specified time Your amp s input source will automatically be set to the input to which your iPod is connected Notes e This function only works when the OSD mode is set to Off e To use this function your iPod must be in the RI Dock and the RI Dock must be con nected to your amp with both an RI cable and an audio cable When you use this function be sure to set your amp s volume con
16. ent the remote controller s sig nal may be obstructed and the remote controller may not work reliably The remote controller may not work reli ably if the RI Dock is subjected to bright light such as direct sunlight or inverter type fluorescent lights Keep this in mind when installing If another remote controller of the same type is used in the same room or the RI Dock is installed close to equipment that uses infrared rays the remote controller may not work reliably Don t put anything on top of the remote controller such as a book or magazine because a button may be pressed contin uously thereby draining the batteries The remote controller may not work reli ably if the RI Dock is installed in a rack behind colored glass doors Keep this in mind when installing The remote controller will not work if there s an obstacle between it and the RI Dock s remote control sensor Getting Started cContinued Hooking Up the RI Dock Depending on the Onkyo amp that you re using choose connection method A or B A Connect the RI Dock s AUDIO OUT L R jacks and VIDEO OUT jack to an RI Dock compati ble input on your Onkyo amp You might need to change the input display to HDD or DOCK B Connect the RI Dock s AUDIO OUT L R jacks to the TAPE IN jacks on your Onkyo amp And connect the RI Dock s VIDEO OUT jack directly to your TV See your amp s instruction manual for details A
17. feat the safety purpose of the polar by the operating instructions as an improper ized or grounding type plug A polarized plug adjustment of other controls may result in has two blades with one wider than the other A damage and will often require extensive grounding type plug has two blades and a third work by a qualified technician to restore the grounding prong The wide blade or the third apparatus to its normal operation prong are provided for your safety If the pro E If the apparatus has been dropped or dam vided plug does not fit into your outlet consult aged in any way and an electrician for replacement of the obsolete F When the apparatus exhibits a distinct outlet change in performance this indicates a need 10 Protect the power cord from being walked on or for service pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power sup ply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or mois ture does not operate normally or has been dropped Precautions 1 Recording Copyright Unless it s
18. hat the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065 EN55013 EN55020 and EN61000 3 2 3 3 GROEBENZELL GERMANY K MIYAGI ONKYO EUROPE ELECTRONICS GmbH Getting Started About the RI Dock With the Onkyo RI Dock you can easily play the music stored on your Apple iPod through your Onkyo audio system and enjoy great sound and watch iPod slideshows and videos on your TV In addition the onscreen display OSD allows you to view navigate and select your iPod s contents on your TV and with the supplied remote controller you can control your iPod from the comfort of your sofa You can even use your Onkyo amp s remote con troller to operate your iPod fRI1 which stands for Remote Interactive is an exclusive Onkyo control system that allows all fRI capable Onkyo audio components to be turned on or off together and your amp to turn on automatically and select the appropriate input source when playback is started on a source component It also allows you to control your iPod with your amp s remote controller In this manual the DS A3 Remote Interactive Dock is referred to as the RI Dock Features U Easily links iPod touch 1st generation iPod touch 2nd generation iPod classic iPod nano 3rd generation iPod nano 4th generation iPod 4th generation iPod 5th generation iPod nano 2nd generation iPod
19. he previous album on the iPod Depending on your amp some buttons may not work as expected 16 Troubleshooting E There s no sound Make sure your iPod is actually playing Make sure your iPod is inserted properly in the RI Dock Make sure your ampis turned on the correct input source is selected and the volume is turned up Make sure the plugs are pushed in all the way Make sure the AC adapter is connected to a suit able wall outlet and connected to the RI Dock E The RI Dock s remote controller doesn t control your iPod If the RI Dockis placed on top of another compo nent the remote controller s signal may be obstructed and the remote controller may not work reliably In this case try repositioning the RI Dock Make sure your iPod is properly inserted in the RI Dock When you use the RI Dock s remote controller point it toward the RI Dock see page 8 Some of the remote controllers buttons work dif ferently depending on the OSD mode On or Off see page 7 E Your amp s remote controller doesn t con trol your iPod Make sure your iPod is properly inserted in the RI Dock If your amp s remote controller has remote mode buttons make sure you ve selected the right mode Check the RI Dock s RI MODE switch setting When you use your amp s remote controller point it toward your amp The RI Dock must be connected to your amp with both an RI cable and an audio cable
20. llation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the fol lowing measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected Consult the dealer or an experienced radio TV technician for help For Canadian Models NOTE THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES 003 For models having a power cord with a polarized plug CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT Mod le canadien REMARQUE CET APPAREIL NUM RIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB 003 DU CANADA Sur les mod les dont la fiche est polaris e ATTENTION POUR VITER LES CHOCS LECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND For some models Before use connect the appropriate AC plug adapter to the AC adapter The type of plug adapter depends on the place of purchase Disconnect Connect For European Models Declaration of Conformity We ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6 82194 GROEBENZELL GERMANY C declare in own responsibility t
21. r amp Connect the RI Dock s VIDEO OUT jack to an unused video input on your amp When you want to watch an iPod slideshow or video select the video input source first and then select the TAPE input source Your amp will output the audio being fed to the TAPE input and because the video source doesn t change when the TAPE input source is selected it ll continue to output the video being fed to the video input E What to do if you already have a compo nent connected to your amp s TAPE input or RI Dock compatible input Connect the RI Dock to an unused AV input on your amp and select the input source manu ally Using the RI Dock Setting the OSD Mode Set the OSD onscreen display mode before you start using the RI Dock 1 2 10 Insert your iPod into Plug in the AC adapter Turn on your TV and amp and select the appropriate inputs on your TV and amp the RI Dock Select the video output mode depending on the video connection While pressing the remote controller s SETUP button press the Up a button for the component video connection press the Y button for the composite default connection Use the remote controller s MODE MODE button to set the OSD mode On Playlists artists albums songs and so on are displayed on your TV and you can navigate and select your music or video while looking at your TV While this mode is selected your iPod dis plays the
22. sing the remote controller SETUP button Used to set the TV system PAL NTSC video output mode composite component and the remote controller s ID MODE button Sets the OSD mode to On or Off MENU button Used to switch the function mode between Music mode and Video mode Used to select the previous menu on the onscreen display and iPod SELECT button Used to select songs videos and menus on the onscreen display and iPod Previous and Next I lt gt gt I buttons The Previous I lt button selects the previ ous track During playback it selects the beginning of the current track The Next gt gt button selects the next track Press and hold the Previous I lt button to rewind Press and hold the Next but ton to fast forward SHUFFLE button Music mode only Sets the Shuffle function to Songs Albums or Off Play Pause gt aa button Starts or pauses playback of the selected song video PLAYLIST PAGE MODE 4 Y buttons Used to select the page modes During play back or when the OSD mode is set to Off they select playlists ALBUM PAGE a J v buttons Used to page through the playlists artists albums songs genres composers dis played on your TV During playback or when the OSD mode is set to Off they select albums RESUME button Used to resume playback It has no function when the OSD mode is set to Off Up and Down arrow a v buttons Use
23. ton repeatedly to select the music top menu and use the Up and Down arrow a buttons to select Now Playing and then press the SELECT button Repeat mode Playback status Shuffle mode a Now Playing 1 5 Moonlight Sonata Beethoven Piano Solo P2222224 01 20 Playback time Total time Shuffle modes Repeat modes E Song shuffle fq All repeat Album shuffle R1 One track repeat H Screen Saver You can set the time at which the screen saver is activated to any one of the following four options 1 minute 5 minutes 10 minutes or Off screen saver off When the screen saver activates the onscreen display on your TV disappears Press any button on the remote controller to cancel the screen saver and resume the onscreen display 12 Using the RI Dock Continued Video Mode E Playing Videos MODE RESUME me MENU eE n GQ gt 11 _ SELECT gt i REPEAT enl A A PLAYLIST ALBUM S PAGEMODE PAGE VOLUME Ole v v 1 Press the remote controller s MENU but ton to select the Video mode 2 Use the Up and Down arrow a J Y but tons to select Movies Music Videos TV Shows Video Podcasts or Rentals and then press the SELECT button Repeat mode e Video gt Movies Music Videos TV Shows Video Podcasts Rentals Top Menu Repeat modes RI All repeat R1 One track repeat 3 Use the Up and Down arrow a J
24. trol to a suitable level Your amp may take several seconds to startup so you might not hear the first few seconds of the first song video XN E Charging Your iPod s Battery The RI Dock charges your iPod s battery while your iPod is in the RI Dock Notes To charge your iPod battery the AC adapter must be plugged into a suitable wall outlet and connected to the RI Dock s DC IN jack See your iPod s instruction manual for more information on battery charging Setting the Remote Controller s ID If you cannot adjust the volume of your Onkyo component with the DS A3 s remote controller try changing its remote control ID The default setting is 1 Some Onkyo components are set to ID 2 or 3 e While pressing and holding down the SETUP button press one of the following buttons for more than 3 seconds to set the ID ID 1 PLAYLIST Up a button ID 2 ALBUM Up a button ID 3 PLAYLIST Down Y button ID 4 ALBUM Down y button 15 Using the RI Dock Continued Using Your Amp s Remote Controller The following table shows which buttons on your amp s remote controller you can use to control your iPod while it s in the RI Dock Be sure to select the appropriate remote mode first and point your remote controller at your amp Note that some buttons may be labelled differently and some remote controllers may not have certain buttons Remote controller button to us
Download Pdf Manuals
Related Search