Alpenföhn Brocken
Contents
1. Finish the installation by connecting the fan cable to the motherboard AMD FM1 AM3 AM3 AM2 AM2 Installation Remove the original retention frame from the motherboard l Gi Slip the washers on the flat screws protruding out of the motherboard and thread the hex head nuts on the screws to secure the back plate Put the heatsink onto the processor and put the retention plate AMD across the heatsink base then secure the heatsink by threading the thumb screws into the hex head nuts Mounting holes for AMD Put the back plate onto the back of the motherboard insert the flat screws through the AMD mounting holes as circled Evenly apply a thin layer of thermal grease onto the processor a Fix the De Vibration buffer onto the fan and attach the fan to the heatsink with wire clips Finish the installation by connecting the fan cable to the motherboard AMD K8 Installation Remove the original retention frame from the motherboard A eu Slip the washers on the flat screws protruding out of the motherboard and thread the hex head nuts on the screws to secure the back plate Put the heatsink onto the processor and put the retention plate AMD across the heatsink base then secure the heatsink by threading the thumb screws into the hex head nuts lounting holes for AMD K8 Put the back plate onto the back of the motherboard insert the f2. 1 All specifications subject to change without notice 2 Under no condition shall Alpenf hn be liable for any indirect incidental 3 fe By A CAUTION or consequential damages arising from any defect or error in this manual or product 3 Please ask for professional help if you are not sure of safe installation INSTALLATION GUIDE This installation guide is applicable for Brocken EKL AG Nadler Str 8 10 D 88299 Leukirch www alpenfoehn de MADE IN CHINA COMPONENTS LIST 1 H Plate Ul 1 pe 2 HPlate UA 1 pc 3 H plate 1366 1156 1155 1 pc 4 Back Plate 1 pc 5 Steel buckle 2 pcs 6 Fan 1 pe 7 Hexangular nut 4 pcs 8 Thumb Screw A 4 pcs 9 De vibration buckle assembled on the fan 4 pcs 10 Flat Screw 4 pcs 11 WasherA 4 pcs 12 Nut 4 pcs 13 Double screw bolt with de vibration washer 5 pcs 14 Insulating Washer 4 pcs Brocken 15 LGA1366 1156 Rivet 4 pcs Attachments of components for assembly of second 120x120x25mm standard fan Steel buckle 2pcs De vibration buckle 4 pcs PRODUCT SCHEMATIC DRAWING 16 TIM 1 pe NTEL LGA775 Installatio Mounting holes for LGA 775 Put the back plate onto the back of the motherboard and insert the flat screws through the LGA775 mounting holes Evenly apply a thin layer of thermal grease onto the processor Fix the De Vibration buffer onto the fan and attach the fan to the heatsink with wire c
3. lat screws through the AMD K8 mounting holes as circled Evenly apply a thin layer of thermal grease onto the processor a Fix the De Vibration buffer onto the fan and attach the fan to the heatsink with wire clips Finish the installation by connecting the fan cable to the motherboard
4. lips Slip the washers on the flat screws protruding out of the motherboard and thread the hex head nuts on the screws to secure the back plate Put the heatsink onto the processor and put the retention plate Intel across the heatsink base then secure the heatsink by threading the thumb screws into the hex head nuts Finish the installation by connecting the fan cable to the motherboard INTEL LGA1366 1 156 Installati Insulating Washer LGA1366 1156 Rivet Do e Peel off the film of insulating washer from one side and stick it onto the LGA1366 1156 rivets o Peel off the other film of insulation washers stick them onto the back of the motherboard Put the retention plate 1366 1156 across the headsink base il i l Put the heatsink onto the AGAI processor the heatsink base 641156 LGA156 should be contacted with processor completely the holes on the retention plate 1366 1156 should be on the same line of hexangular nut holes Fix the De Vibration buffer onto the fan and attach the fan to the heatsink with wire clips Fasten the hex head nut which two ends with threads onto the rivets to secure the backplate Note the end with black de vibration washer should be screwed in revits Evenly apply a thin layer of thermal grease onto the processor Fasten the heatsink by threading the nut into hex head nut which two ends with threads
Download Pdf Manuals
Related Search