Home

Fujitsu B line B22W-5 ECO

1. d i e E Colour combination very suitable eee L G a a FTI E a o a al Gara Ez di 1 Colour combination not suitable because colour hues are too close together thin characters are not identifiable or rigorous focusing is demanded of the human eye A26361 K1320 Z220 1 7619 edition 2 21 Troubleshooting Troubleshooting Should an error occur first check the following points If the distortion is still not eliminated the monitor should if possible be checked on another computer If you are unable to solve the problem please inform our help desk Having this problem Check the following points No screen display Check whether the ON OFF switch on the monitor is switched on Check whether the power cable on the monitor is connected correctly Check whether the computer is switched on No screen display Check whether the computer is switched on Power indicator is lit Check whether the data cable for the monitor is correctly attached to the monitor port on the computer Press any key on the computer keyboard The computer may be in power saving mode Alter the brightness and or contrast until you get a picture Message No Signal Check whether the data cable for the monitor is correctly attached to the monitor port on the computer Check whether the computer is switched on Message The input signal horizontal frequency and Power indicator does not light up Frequency out of range refres
2. of all business electricity and that this is growing rapidly If all desktop PCs and peripherals were to enter a low power mode when not in use the overall electricity saving could amount to 2 billion annually These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere equivalent to the discharge from 5 million cars As an Energy Star Partner Fujitsu Technology Solutions GmbH has determined that this product meets the Energy Star guidelines for energy efficiency A26361 K1320 Z220 1 7619 edition 2 5 Important notes Disposal and recvcling This device has been manufactured as far as possible from materials which can be recycled or disposed of in such a way that the environment is not damaged The device may be taken back after use to be reused or recycled provided that it is returned in a condition that befits its intended use Any components not reclaimed will be disposed of in an environmentally acceptable manner The device must be disposed of in accordance with local regulations for disposal of special waste The screen background lighting contains mercury You must observe the applicable handling and disposal safety regulations for fluorescent tubes If you have any questions regarding disposal please contact your local sales office our Help Desk or Fujitsu Technology RECUPEL SWICO Solutions GmbH Boulevard Reyers 80 Schweizerischer Remarketing and Recycling B 1030 Brussels Wir
3. 1 so Advanced Information L Operation Press the SELECT MENU activate the OSD menu The main menu appears with icons for the setting functions The first icon Brightness Contrast is highlighted and the associated functions are visible in the right hand menu field button to Press the Forwards ECO button or the Back INPUT button to highlight another icon e g Image adjust Press the SELECT MENU button to select the highlighted icon The Image adjust setup window will be displayed Press the Forwards ECO button or the Back INPUT button to highlight another function Press the SELECT MENU button to select the highlighted function Press the Forwards ECO button or the Back INPUT button to highlight another function Press the EXIT AUTO exit the function Press the Forwards ECO button or the Back INPUT button to highlight another function or press the EXIT AUTO button to return to the main menu All changes are stored automatically button to If you wish to change other settings select the corresponding function from the OSD main menu All possible adjustments of the main menu are described below A26361 K1320 Z220 1 7619 edition 2 Operation OSD menu functions The OSD menu for analogue monitor operation is described below During digital opera
4. The device may only be operated in the wide format 0 landscape mode The buttons of the control panel are located at the bottom in the middle of the monitor Store this manual close to the device If you pass the device on to third parties you should pass this manual on with it s We recommend that you place your device on a durable non slip surface In view of the many different finishes and varnishes used on furniture it is possible that the feet of the device may mark the surface they stand on e To ensure sufficient ventilation the air supply and air outlet openings of the monitor must never be blocked Power cable Use the supplied power cable only Use the following guidelines if it is necessary to replace the original cable set s The female male receptacles of the cord set must meet IEC60320 CEE 22 requirements The cable has to be HAR certified or VDE certified The mark HAR or VDE will appear on the outer sheath e For devices which are mounted on a desk or table type SVT or SJT cable sets may be used For devices which sit on the floor only SJT type cable sets may be used The cable set must be selected according to the rated current for your device e If necessary replace the original power cable with a regular grounded 3 core mains lead Transporting the device Transport all parts separately in their original packaging or in a packaging which JAN protects them from knocks and jolts to the new site D
5. device or lead to loss of data The warranty will be invalidated if the device becomes defective through failure to observe these warnings LE Indicates important information for the proper use of the device Indicates an activity that must be performed This font indicates data entered using the keyboard in a program dialogue or at the command line e g your password Name123 or a command used to start a program start exe This font indicates information that is displayed on the screen by a program e g Installation is complete This font indicates terms and texts used in a software interface e g Click on Save names of programs or files e g Windows or setup exe This font indicates cross references to another section e g Safety information cross references to an external source e g a web address For more information go to http ts fujitsu com Names of CDs DVDs and titles or designations of other materials e g CD DVD Drivers amp Utilities or Safety Manual indicates a key on the keyboard e g F10 This font indicates terms and texts that are emphasised or highlighted e g Do not switch off the device 2 A26361 K1320 Z220 1 7619 edition 2 Important notes Important notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device Safety instructions This device complies with the relevant safe
6. interface it can automatically read the data for ensuring optimum operation from the monitor and select the appropriate settings Preset operating modes The picture position and size have been optimised at the factory for the operating modes listed above Depending on the graphics card used it may be necessary to adjust the display position or size In this case you can change and save the settings see chapter Changing the monitor settings Page 15 For ergonomic reasons a screen resolution of 1680 x 1050 pixels is recommended Because of the technology used active matrix an LCD monitor provides a totally flicker free picture even with a refresh rate of 60 Hz Most frequent operating modes Horizontal frequency Refresh rate Screen resolution 31 5 Kz 720 x 400 31 5 Kz G40 x 480 37 5 Kz G40 x 480 T024 x 768 26 A26361 K1320 Z220 1 7619 edition 2 Pn Meaning 2 Video input green Boo Ground e Video groma re a Video ground bie s evon V sync DDC Clock A26361 K1320 Z220 1 7619 edition 2 Technical specification 27 Technical specification DVI D port Meanings 28 A26361 K1320 Z220 1 7619 edition 2
7. temperature Brightness reduced After the ECO operating mode is switched off the brightness previously set by the user is restored Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings b Press and hold the SELECT MENU button for a few seconds while you switch on the monitor with the ON OFF switch Ly The Action was executed message appears Please proceed in the same manner to release the locked OSD menu again Locking the ON OFF button The ON OFF switch can be locked to prevent accidental or unauthorised changes to the monitor settings Please proceed in the same manner to release the locked ON OFF switch again Changing the monitor settings using the OSD menu With the buttons on the control panel you can call up and use the integrated OSD On Screen Display menu The OSD menu is available in various languages The English menu names are used in the following description default setting You can select another language using the OSD Language function in the OSD Setup menu 16 A26361 K1320 Z220 1 7619 edition 2 20 ji Brightness Contrast FUJITSU Image adjust Brightness of Contrast Audio Black Level 3 Auto Brightness Colour Auto Level OSD Setup a Advanced Information Brightness Contrast FUJITSU G FI Image adjust H Position of V Position Audio Clock Phase Colour amp OSD Setup mm
8. the Video Electronics Standards Association Copyright Fujitsu Technology Solutions GmbH 2009 All rights reserved including rights of translation reproduction by printing copying or similar methods in part or in whole Offenders will be liable for damages All rights reserved including rights created by patent grant or registration of a utility model or design Subject to availability and technical modifications No liability for content or printing errors Contents Contents Your LCD Screeitirs ai ii id dbabar a Ka A aa aa ajja A 1 Target group a NS AD en A RE af ee 1 Further information sessi 4446 A e a b a 2 Notational conventions ss 3 we 8 606s cea hoe EB 2 Important Notes jo a LI il a 3 Safetyiinstructions jse re MI Mwy a RERED dd 3 Power Cable ii xa i italla e ada WG AORTA REIS RS Sant ba beta kie era 4 Transporting the devi e 11 33 14 eee thot A e 4 Cleaning the device 2 s s 0 44204 444745 ii Be EW eae eee ae alee ee adeno 4 CEMA KINIE A ia qa A BA d nti uri a a EE 5 E EF VEStar i TA A be Dyan Said 5 Disposal and re velir Liskzanzanzjzzzjijiiiepatizueiiii ita fi tone re eee 6 Gettin started lt 22 ia i l 7 Unpacking and checking the delivery L 000 eee eee e eens 7 Setting up the deviCe iiniis ba betes fe ia a ener esas dd ieee eee net a a pee adel 7 Setting up an ergonomic video workstation 0 00 ccc eee 8 Adjusting the height 2c vcers 2022 ran onda MANOL AAAA eee eee eRe e
9. Displav Fo FUJITSU B22W 5 ECO Operating Manual English sr A Do vou have any technical questions or problems Please contact our Hotline Help Desk please refer to the enclosed Help Desk list or look up the contact details on our website at http ts fujitsu com support your sales partner your sales office The latest information about our products useful tips updates etc is available on our website http ts fujitsu com support Copvright Fujitsu Technology Solutions 2009 2009 06 Published by Fujitsu Technology Solutions GmbH Mies van der Rohe Strake 8 80807 Munchen Germany Contact http ts fujitsu com support All rights reserved including intellectual property rights Technical data subject to modifi cations and delivery subject to availability Any liability that the data and illustrations are complete actual or correct is excluded Designations may be trademarks and or copyrights of the respective manufacturer the use of which by third parties for their own purposes may infringe the rights of such owner For further information see http ts fujitsu com terms_of_use html FUJITSU B22W 5 ECO Operating Manual Vour LCD screen Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Notes regarding the DIN EN ISO 13406 2 standard Technical specification 24 25 VESA DDC and DPMS are registered trademarks of
10. N nor in the limit range of operation B22W 5 ECO Dimensions and weight Visible diagonals 55 9 cm Dot pitch 0 28 mm Image size Width 473 76 mm Height 296 1 mm Maximum resolution 1680 x 1050 Dimensions incl monitor base Width 511 mm Height 401 5 mm 511 mm Depth 212 mm Weight without packaging approx 7 6 kg Storable display modes 25 Pixel error classes according Class ll to ISO 13406 2 Electrical data Video Analog positive 0 7 Vss 75 Q Digital DVI D HDMI with HDCP Synchronisation Separate sync TTL positive or negative Horizontal frequency 30 kHz 80 kHz multi scanning Refresh rate 56 Hz 76 Hz Maximum pixel rate 135 MHz Power supply switches automatically 100 V 240 V 50 Hz 60 Hz Total power consumption Normal operation lt 24 W without audio ECO operating mode lt 24 W Energy saving mode lt 0 1 W Sound output 2 0 W left 2 0 W right A26361 K1320 Z220 1 7619 edition 2 25 Technical specification Environmental conditions Environment class 3K2 DIN IEC 721 Rated range of operation 15 C 35 C Humidity 20 85 Limit range of operation 5 Cue 39 C Humidity 20 85 VESA DDC compatible VGA interface Your monitor is equipped with a VESA DDC compatible VGA interface VESA DDC Video Electronics Standard Association Display Data Channel is used as the communications interface between the monitor and the computer If the computer is equipped with a VESA DDC compatible VGA
11. age 3 N CE conformance and optimum picture qualitv are guaranteed oniv if you use the data cables supplied gt Switch off the monitor and the computer gt Disconnect the power plug from the computer Connecting cables to the monitor The data cables supplied have two 15 pin D SUB connectors or two 24 pin DVI connectors for connection to the monitor and to the computer Information on the computer connections and interfaces is contained in the operating manual for the computer 10 A26361 K1320 Z220 1 7619 edition 2 Fujirsu I I I Getting started D SUB socket ANALOG Security slot for Kensington Lock Holes for fixing swivel arm or wall bracket Connect one of the connectors of the data cable to the D SUB socket or DVI D socket of the monitor and secure the plug in connection by tightening the safety screws The monitor automatically detects the input when only one signal source is connected Insert one plug of the audio line in the AUDIO IN socket on the monitor 1 Power connector 2 AUDIO IN socket 3 DVI D connector DIGITAL gt Select the data cable which is suitable for your computer WE 79 ee jill 1 2 3 4 gt gt and make sure it is properly engaged gt Plug the power cable supplied into the power connector of the monitor gt Secure the cover over the connections A lock Kensington Lock can be mounted in the security slot to protect t
12. creen has a whole range of useful features and functions e g e TFT display Thin Film Transistor active matrix minimal space requirements thanks to slim casing optimum ergonomic characteristics totally distortion free excellent picture definition and colour purity right into the corners e high degree of brightness and good contrast e high resolution 1680 x 1050 presentation of up to 16 7 million colours in conjunction with an appropriate display adapter automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates vertical frequencies from 56 to 76 Hz absolutely flicker free e digital screen controller with microprocessor for storing 28 different display modes e freely adjustable colour alignment for matching the screen colours to the colours of various input and output devices convenient operation via integrated OSD On Screen display menu e VESA DDC compatibility e VESA FPMPMI compatibility Flat Panel Monitor Physical Mounting Interface Mounting device for swivel arm and wall bracket e Plug amp Play capability e ECO function power management for reducing power consumption when the computer is not in use Compliance with the recommendations according to TCO 5 0 e the monitor fulfills all GS Gepr fte Sicherheit Certified Security requirements This operating manual contains important information you require to start up and run your LCD monitor A graphics card dis
13. d as described in Chapter Removing monitor base Page 10 Adjusting the height The height of the monitor can be adjusted by approximately 110 mm gt Grasp the monitor with both hands on the right and left edge of the casing and move it upward or downward Adjusting the inclination The inclination of the monitor can be adjusted by 5 forward and 20 backwards from its vertical position gt Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle Adjusting the rotation gt Grasp the monitor with both hands on the right and left edge of the casing and turn it to the desired position A26361 K1320 Z220 1 7619 edition 2 9 Getting started Removing monitor base Before vou can use a swivel arm or a wall bracket vou must remove the monitor base i The display surface is susceptible to scratching gt Switch off the monitor and pull the power plug out of the power socket gt Lay the monitor on its face on a soft surface gt Remove the cover and disconnect all cables gt Remove the screws 1 on the rear of the monitor L gt You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing For instructions on how to mount the swivel arm or wall bracket please see the documentation for the swivel arm or wall bracket Connecting the device Please observe the safety information in Important notes P
14. d power cable only Lay the cables in such a way that they do not create a hazard danger of tripping and cannot be damaged When connecting the device observe the relevant notes in chapter Connecting the device Page 10 No data transfer cables should be connected or disconnected during a thunderstorm Make sure that no objects e g jewellery chains paper clips etc or liquids get inside the device danger of electric shock short circuit The device is not waterproof Never immerse the device in water and protect it from spray water rain sea water In emergencies e g damaged casing elements or cables penetration of liquids or foreign matter switch off the device disconnect the power plug and contact your sales outlet or our Help Desk Repairs to the device must only be performed by qualified technicians Unauthorised opening and incorrect repair may greatly endanger the user electric shock fire risk Only use the screen resolution settings and refresh rates specified in Chapter Technical specification Page 25 Otherwise you may damage the device If you are in any doubt contact your sales outlet or our Help Desk Use a screen saver with moving images and activate the power management for your monitor to prevent still images from burning in If you operate the device with the swivel arm or wall bracket it must not be turned by 180 A26361 K1320 Z220 1 7619 edition 2 3 Important notes s
15. display should become too dark the background lighting will have to be replaced b Please contact our help desk A26361 K1320 Z220 1 7619 edition 2 23 Notes regarding the DIN EN ISO 13406 2 standard Notes regarding the DIN EN ISO 13406 2 standard Permanentiv unlit or lit pixels The standard of production techniques todav cannot guarantee an absolutelv fault free screen displav A few isolated constant lit or unlit pixels picture elements mav be present The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406 2 Class Il Examples A 20 or 22 flat screen monitor with a resolution of 1680 x 1050 has 1680 x 1050 17664000 pixels Each pixel consists of three subpixels red green and blue so there are almost 5 3 million subpixels in total In accordance with ISO 13406 2 Class Il a maximum of 6 pixels and 9 subpixels may be defective Pixel A pixel consists of 3 subpixels normally red green and blue A pixel is the smallest element that can be generated by complete functionality of the display Subpixel A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function Cluster A cluster contains two or more defective pixels or subpixels in a 5 x 5 pixel block 24 A26361 K1320 Z220 1 7619 edition 2 Technical specification Technical specification Condensation is not permitted neither in the rated range of operation
16. dvanced setting window Selecting the input signal This function allows vou to switch the monitor from analogue to digital mode and vice versa when two signal sources are connected This requires that the graphic card used supports this function Activation deactivation of the DDC CI On The DDC CI function is enabled standard setting Off The DDC CI function is disabled Activating the factorv settings With this function all settings are reset to the factorv settings without prompting for confirmation Press the SELECT MENU button to activate the function The Auto Processing message is displaved Displaving information Call the nformation setting window With this function the model designation serial number resolution H V frequency input signal and polarity of the synchronisation signal are 20 displayed A26361 K1320 Z220 1 7619 edition 2 Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes take note of the information below The primarv colours blue and red on a dark background do not produce the minimum required contrast of 3 1 and are therefore not suitable for continuous text and data entrv When using several colours for characters and background and giving the primarv colours full modulation vou can obtain verv suitable colour combinations see the following table Bagom O OoOo o o S
17. ee 9 Adjusting the inclination 000 rr 9 Adjusting the rotati n 2 ei pa debe pee bbb rbenaepeepids 9 Removing monitor base is e eranan ooi Ea ADTI aA ETAR AAEE E EE AGREE E aa EE 10 Connecting the device Stre sudoers 10 Connecting cables to the monitor 0 0 ea 10 Connecting cables to the computer ern 12 Operation i eiria os tat eae eee eed A EEEE ee ease webu E Eea aiii 13 Switching the device on and off V 0 000 13 Notes on power management ssseeee eee nn 14 Changing the monitor settings rr 15 Changing the monitor settings with the buttons of the control panel 15 Changing the monitor settings using the OSD menu 00000 cece eee eee ee 16 Notes on ergonomic colour adjustment cece cece eee 21 Troubleshooting re i ja ieli 22 Notes regarding the DIN EN ISO 13406 2 standard 00eeeeeeeeeeeeeeeenennnnna 24 Technical specification Lee eee eee nr nn 25 VESA DDC compatible VGA interface 0 00 26 Preset operating modes 2 22 eee ot Ee ENE EE i kkennkkenkkne wk ee ene 26 Most frequent operating Modes 0 00 cee eee teen eee nn 26 SUB DPO cnn i ikona a kai jet e Gece py Re Ree PEG CMAN EKER KEY SEE Due aeeti 27 DVI D Port aa i A Se ea aa ek ee eee 28 A26361 K1320 Z220 1 7619 edition 2 Contents A26361 K1320 Z220 1 7619 edition 2 Your LCD screen Your LCD s
18. eration Adjusting the volume f Call the Audio setting window Set the volume for plavback with the integrated loudspeakers Switch the loudspeakers off or on Setting the colour temperature and colours Call the Colour setting window Select the colour temperature The warmth of the screen colours is set using the colour temperature The colour temperature is measured in Kelvin K You can choose between sRGB 6500 K 9300 K Native and Custom Colour In the user defined setting you can change the colour ratios of the basic colours red green blue as required Adjusting the display of the OSD menu Calling the OSD Setup adjustment window Selecting the language for the OSD menu With this function you choose between English default setting French German Italian and Spanish as the language for the OSD menu OSDH position Setting the horizontal position of the OSD menu With this function you can move the OSD menu to the left or to the right OSDV position Setting the vertical position of the OSD menu With this function you can move the OSD menu up or down OSDTimeout Setting the display duration of the OSD menu With this function you can select a value from 10 to 120 seconds If the set time expires without a setting being made the OSD menu is automatically hidden A26361 K1320 Z220 1 7619 edition 2 19 Operation Setting functions in the Advanced menu Input select Factorv Recall Call up the A
19. h rate at the displayed input does not kHz Hz correspond to the technical data for the monitor Please change the display mode to 1680 x 1050 with 60 Hz gt Adjust the video frequency range using the computer software see documentation for the computer or display adapter Set a different screen resolution using the computer software see documentation for the computer or display adapter Picture position not correct The monitor recognises an undefined mode see chapter Technical specification Page 25 gt Press the EXIT AUTO button to perform auto adjustment of the screen Picture is shaking Check whether the data cable for the monitor is correctly attached to the monitor port on the computer Press the EXIT AUTO button to perform auto adjustment of the screen Picture is wrongly adjusted b Press the SELECT MENU button to activate the Factory Recall function The Auto Processing message appears 22 A26361 K1320 Z220 1 7619 edition 2 Troubleshooting Having this problem Check the following points Picture disturbances vertical lines gt Press the EXIT AUTO button to perform auto adjustment of the screen Picture disturbances horizontal lines picture gt Press the EXIT AUTO button to perform noise auto adjustment of the screen The screen becomes darker The background lighting has a limited lifetime If your monitor
20. he monitor from theft A Kensington Lock is not included with the monitor at delivery A26361 K1320 Z220 1 7619 edition 2 11 Getting started Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for vour computer gt gt gt 12 Connect the data cable to the active monitor port on the computer and secure the plug in connection by tightening the safety screws Insert the other plug of the audio cable in the audio output of the computer Plug the power connector of the monitor into a properly grounded mains outlet Plug the power connector of the computer into a properly grounded mains outlet If your computer has two monitor ports onboard screen controller and separate graphics card the monitor port for the separate graphics card is active as standard A26361 K1320 Z220 1 7619 edition 2 Operation Operation Switching the device on and off 1 Buttons for the OSD menu On Screen 2 Power supply indicator Display 3 ON OFF switch Press the buttons upwards from below The colour of the LED indicator changes as follows LED indicator Monitor and computer are switched on normal mode Monitor and computer are switched on ECO mode orange The monitor is not receiving a video signal or is switching to power saving mode indication approx 2 seconds does not light up The monitor i
21. iscover that the delivery does not correspond to the delivery note notify your local sales outlet immediately vvvyv Do not discard the original packing material of the devices You may need the packaging in the future if you need to transport your device Setting up the device To ensure sufficient ventilation the air inlet and outlet openings of N the device must be kept clear A26361 K1320 Z220 1 7619 edition 2 7 Getting started Setting up an ergonomic video workstation gt Do not position the video workstation opposite a window 1 b gt A E gt j mi gt Qe Crit gt UE gt u LAN gt TST B rt gt Position the monitor outside the reach 1 of a light source 1 gt Position the keyboard where it is easiest to reach 1 8 A26361 K1320 Z220 1 7619 edition 2 Getting started gt Position the monitor so that the eye distance to the screen 1 is around 50 cm 1 gt Position the monitor for optimum viewing 1 The monitor should under no circumstances fall outside the permissible 0 65 viewing space 2 fn 30 60 30 65 2 2 Depending on the situation it may be advisable to use a swivel arm or wall bracket VESA FPMPMI which are available from specialist dealers For this purpose the monitor base must be removed beforehan
22. o not unpack them until all transportation manoeuvres are completed If the device is brought from a cold environment into the room where it will be used condensation mav occur Before operating the device wait until it is absolutelv drv and has reached approximatelv the same temperature as the installation site Cleaning the device Switch off the device and unplug the power plug N Do not clean anv interior parts vourself leave this job to a service technician Do not use anv cleaning agents that contain abrasives or mav corrode plastic Ensure that no liquid enters the device The displav surface of the device is sensitive to pressure and scratches Clean it only using a soft slightly moistened cloth The surface of the casing can be cleaned with a dry cloth If particularly dirty use a cloth that has been moistened in mild domestic detergent and then carefully wrung out 4 A26361 K1320 Z220 1 7619 edition 2 Important notes CE marking The shipped version of this device complies with the requirements of EEC directives 2004 108 EC Electromagnetic compatibility and 2006 95 EC Low voltage directive Energy Star The Fujitsu LCD colour monitor is equipped with a power management system which reduces the power draw in OFF mode to less than 0 1 W With this the LCD monitor satisfies the requirements of the U S Environmental Protection Agency Hag 4p EPA The EPA estimates that computer equipment uses approximately 5
23. onitor settings When putting the monitor into operation for the first time the screen displav should be optimally adapted to the display adapter used Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions With the OSD menu not activated you can make the following settings directly Ce _ SELECT MENU Vv Eco A INPUT EXIT AUTO 1 Buttons for the OSD menu On Screen 3 ON OFF switch Display 2 Power supply indicator Performing auto adjustment of the monitor gt Press the EXIT AUTO button for about 1 second L The Auto Processing message appears Picture quality and position are set to optimum values for your system Selecting input signal D SUB DVI D gt Press the Back button to open the Input select setting window gt Press the Forwards ECO button or the Back INPUT button to select the desired monitor connection VGA or DVI This setting window can also be called when the OSD menu is locked A26361 K1320 Z220 1 7619 edition 2 15 Operation Activate deactivate ECO operating mode The power consumption of the device can be decreased bv reducing the brightness of the picture b Press the Forwards ECO button to switch the ECO operating mode on or off Ly The message Action was executed appears If the ECO operating mode is activated the following OSD settings are changed Colour 6500 K
24. play adapter with VGA interface or a digital display adapter with DVI interface is required to control the LCD monitor The monitor processes the data supplied to it by the display adapter The display adapter or the associated driver software is responsible for setting the modes resolution and refresh rate When putting the monitor into operation for the first time the screen display should be optimally adapted to the display adapter used and adjusted in accordance with your needs see chapter Changing the monitor settings Page 15 Target group You don t need to be an expert to perform the operations described here However please observe the safety information given in the operating instructions for the computer and in this manual In the event of any problems occurring please contact your sales outlet or our Help Desk A26361 K1320 Z220 1 7619 edition 2 1 Vour LCD screen Further information Details of how vou set the resolution and refresh rate are provided in the documentation for vour displav adapter and the associated driver software For ergonomic reasons we recommend a screen resolution of 1680 x 1050 pixels Because of the technologv used active matrix an LCD monitor provides a totallv flicker free picture even with a refresh rate of 60 Hz Notational conventions Pav particular attention to text marked with this svmbol Failure to observe A these warnings could pose a risk to health damage the
25. s switched off or is in power saving mode power consumption in standby and off mode lt 0 1W 1 power indicator 2 ON OFF switch A26361 K1320 Z220 1 7619 edition 2 13 Operation gt Switch the device on using the ON OFF switch Only switch on the computer after you have switched on the monitor Notes on power management If your computer is equipped with power management power saving mode the monitor can fully support this function Here the monitor does not distinguish between the individual energy saving modes of the computer standby mode suspend mode and OFF mode as it is capable of immediately switching into the mode with the highest energy saving effect ees ee Power supply illuminated blue illuminated green unlit indicator max brightness yp 200 cdi Power consumption lt 24 W lt 21W reduced to lt 0 1 W typical If your computer detects inactivity no input it sends an appropriate signal to the monitor to reduce the power consumption energy saving mode The power indicator of the monitor changes colour to indicate the status change ECO mode is the preset factory default Once an input is made at the computer the screen contents are restored For detailed information on how energy saving mode operates please refer to the operating manual or technical manual of the computer 14 A26361 K1320 Z220 1 7619 edition 2 Operation Changing the m
26. tion some functions are not available thev are not needed because of the digital transmission technologv being used Adjusting the brightness and contrast eo Call up the Brightness Contrast setting window Set the brightness of the display With this function you change the brightness of the background lighting You can see whether the ECO operating mode is active under the bar for displaying the brightness setting Contrast Set the contrast of the display siting be it tienes Black level Set the brightness of the display no cosas Auto level Adjust the signal level With this function you can automatically set the contrast The function is executed with the SELECT MENU button If the contrast is set too high bright surfaces can no longer be distinguished from very bright surfaces If the contrast is set too low the maximum brightness will not be achieved Adjusting the picture size and position Call the Image adjust setting window Eliminate picture disturbance With this function you fine tune your monitor to eliminate picture disturbance Set synchronisation With this function you adjust the picture width to eliminate vertical picture disturbances H Position Adjust the horizontal position With this function vou move the picture to the left or to the right V Position Adjust the vertical position With this function vou move the picture up or down 18 A26361 K1320 Z220 1 7619 edition 2 Op
27. tschaftsverband der D 33106 Paderborn Germany Tel 32 2 706 86 16 Informations Kommunikations Tel 49 5251 81 80 10 Fax 32 2 706 86 13 und Organisationstechnik Fax 49 5251 81 80 15 E mail info recupel be Swiss Trade Association http ts fujitsu com wvm http www recupel be for Information Communications and Organisational Technology For a list of SWICO disposal sites see http www swico ch Taiwan Environmental Fujitsu America Inc Protection Administration 1250E Arques Avenue Executive Vuan R O C Sunnvvale CA 94085 U S A http recycle epa gov tw Contact Bernd Henning Phone No 408 329 6737 Fax No 408 746 8299 Information on this subject is also available on the Internet at http ts fujitsu com recycling 6 A26361 K1320 Z220 1 7619 edition 2 Getting started Getting started Unpacking and checking the deliverv The displav surface of the device is sensitive to pressure and scratches N Always hold the device by the casing The complete device package includes one monitor one data cable D SUB one data cable DVI D one audio cable one power cable one CD with software and documentation one Warranty Booklet one Safety manual Unpack all the individual parts Check the contents of the package for any visible damage caused during transport Check whether the delivery conforms to the details in the delivery note Should you d
28. ty regulations for data processing equipment including electronic office machines for use in an office environment If you have any questions contact your sales outlet or our Help Desk The display surface of the device is sensitive to pressure and scratches You should therefore be careful with the display surface in order to avoid lasting damage scratches If the device is brought into the installation site from a cold environment condensation can form Before operating the device wait until it is absolutely dry and has reached approximately the same temperature as the installation site When installing and operating the device please observe the notes on environmental conditions in Chapter Technical specification Page 25 as well as the instructions in Chapter Setting up an ergonomic video workstation Page 8 To ensure sufficient ventilation the air inlet and outlet openings of the device must be kept clear The device automatically sets itself to the correct voltage within the range from 100 V to 240 V Make sure that the local mains voltage is neither higher nor lower than this range Ensure that the power socket on the device and the mains outlet are freely accessible The ON OFF switch does not disconnect the monitor from the mains voltage To disconnect fully from the mains supply disconnect the power plug from the socket The device is equipped with a power cable that complies with safety standards Use the supplie

Fujitsu B line B22W-5 ECO

Contents

Download Pdf Manuals

Related Search

Related Contents