Home

Fujitsu ESPRIMO Mobile V Series V6545

image

Contents

1. 7 alle 3 E E You can opt to use just the notebook s LCD screen just the external monitor both the LCD screen and the external monitor Silent Mode This key combination specifies the noise level of the hard disk or optical drive To lower the noise level of the drive the rotating speed is reduced The drive must support this function Sleep mode F12 Use this key combination to activate the currently configured energy saving mode 3 An E E 3 A Switching between open applications Alt Use this key combination to switch between several open applications on Jafa Li Perform warm reboot This key combination restarts the notebook First press and hold both the Ctr and Alt keys then press the Del key First the Task Manager will be displayed You must then press all three keys again to reboot Back tab This key combination moves the cursor back to the previous tabular stop Key combinations using the Windows keys are detailed in the manual for your operating system A26391 K248 Z220 1 7619 edition 1 9 Ports and controls Camera depending on notebook model Your device is fitted with a VGA camera 1 which can also be used as a webcam Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology N Solutions for vour notebook Never use for
2. The key combination Ctrl Alt Gr or Ctrl Alt can be used on external keyboards that do not not feature a Fnj key Activate deactivate Wireless LAN Bluetooth and UMTS optional Fn F1 Use this key combination to start WirelessSelector The radio components that have been activated in BIOS Setup can be switched on and off individually The key combination Fn F1 can only be used if the WirelessSelector software is installed on your device Switch loudspeakers ON OFF F3 This key combination switches your notebook s loudspeakers off and on Decrease volume F4 This key combination reduces the volume of the integrated loudspeakers Increases volume Switch touchpad ON OFF F6 This key combination switches your notebook s touchpad off and on Switch camera ON OFF Decrease screen brightness F8 This key combination decreases the brightness of the screen 3 F5 This key combination increases the volume of the integrated loudspeakers F7 Use this key combination to switch the notebook s integrated camera on or off 8 A26391 K248 Z220 1 7619 edition 1 Ports and controls Increase screen brightness F This key combination increases the brightness of the screen Toggle output screen F10 Use this key combination to select which screen s is are used for display if an external monitor is connected
3. The power on indicator is lit Windows XP You can configure the on off button under Start Settings Control Panel Performance and Maintenance Power Options Advanced Windows Vista You can configure the on off button under Start Settings Control Panel Mobile PC Power Options If you have assigned a password you must enter this when requested in order to start the operating system Detailed information can be found in the Security functions section of the Professional Notebook Operating Manual A26391 K248 Z220 1 7619 edition 1 5 Ports and controls Switching off the Notebook gt Close all applications and shut down your operating system please see operating system manual If the notebook cannot be shut down properly press and hold the ON OFF button for approximately four seconds The notebook will switch off Any unsaved data may be lost The notebook is delivered with a protective film inserted between the keyboard and the LCD screen To ensure optimal protection of the LCD screen it is recommended that you insert this protective film between the keyboard and the LCD screen each time you close the notebook Close the LCD screen so that it locks into place 6 A26391 K248 Z220 1 7619 edition 1 Ports and controls Status indicators The status indicators provide information about the status of the power supply the drives and the keyboard functions The meaning of the
4. symbols displayed are as follows o i E ta ki Radio components indicator Indicator is on One or more radio components are switched on Power on indicator Indicator is on The notebook is switched on Power saving mode indicator Indicator is on The device is in power saving mode Hard disk indicator Indicator is on One of the drives e g hard disk CD DVD is being accessed Batterv indicator Indicator is on the batterv is being charged Caps Lock indicator Indicator is on The Caps Lock key has been pressed All the characters you type will appear in upper case In the case of overlav kevs the character printed on the upper left of the kev will appear when that kev is pressed Num Lock indicator Indicator is on The key combination Fn Num has been pressed The numeric keypad is activated In the case of overlay keys the character printed on the upper right of the key appears when that key is pressed A26391 K248 Z220 1 7619 edition 1 7 Ports and controls Key combinations The key combinations described below apply when using Microsoft Windows operating systems Some of the following key combinations may not function in other operating systems and with some device drivers Key combinations are entered as follows gt Press and hold the first key in the combination gt While holding the first key down press the other key or keys in the combination
5. SIM card sa ka A eh bb 13 Radio components UMTS optional Wireless LAN Bluetooth optional 14 Switching the radio components on and off 14 Removing and installing components during servicing eeeseeeee 15 Notes on installing and removing boards and components 22ssseee eee 15 H rd disk qe vcr 16 Removing the hard disk ccc cece E EEE e e 16 Installing the harddisk 222222 32e ee p ha 2er SEEN 16 Technical data i 0 22 eed x En dene RUE 17 Notebook EE 17 Battery ee DE UA e atte e d aed esa EE TAER 17 Mains adapter wes pee R UD ter div bx peus ES DAMES sl Eb Een aa bed 18 Mains dapter 65 W nete SL Anu ANN AAA est HEP M as eee 18 Mains adapter 90 W222 aa Screens 18 Index ns ee ERR D ACIER ese areraiele X eA TR Male alien 19 A26391 K248 Z220 1 7619 edition 1 Contents A26391 K248 Z220 1 7619 edition 1 Your ESPRIMO Mobile Your ESPRIMO Mobile offers innovative technology and ergonomic design This makes your notebook a reliable convenient mobile PC Your notebook is available in several different versions Most of the sections in this manual apply to all models any differences are indicated separately Some of the illustrations and features in this manual may differ from your model and are for guidance only Your Windows operating system is already pre installed and optimally configured This means you re ready to start when you switch on you
6. ademarks referenced are trademarks or registered trademarks of their respective owners whose protected rights are acknowledged Copyright Fujitsu Technology Solutions GmbH 2009 All rights reserved including rights of translation reproduction by printing copying or similar methods in part or in whole In the event of violations perpetrators will be liable to prosecution for damages All rights reserved including rights created by patent grant or registration of a utility model or design Subject to availability and technical modifications Contents Contents Your ESPRIMO Mobile 22222 0 MG RAR ee ee 1 Notational conventions 2LL nn m hme 2 Important notes 23 2211 iii ik RE ELI I bb EO bOO ann Rn nn 3 Help if problems OCCUP ra kk ita nr ee 3 Ports and controIs u aa IA eae oe nn ea 4 Switching on the notebook sssssussssssssssssss ee she nnn 5 Switching off the Notebook sssessssssssssss sess m en 6 Status indicators ci une nm sens RRRARDRRARE RE ARR RE e ERPRRERDEREL D a reps 7 Key combinations 5 eL VEI ee rrr a ha WERE dicii eto reat ate bx inerte ge 8 Camera depending on notebook model suuusssssssssssssse sss 10 Removing and installing the battery L eese 10 Removifig the battery e Er Sead Aah ee ee a 11 Battery inserting arris rar a A aa 11 SIM card optional 2525332222 s s e ee 12 Inserting the SIM t rd 28 i ea Denken Bere 12 Removing ai
7. cO FUJITSU ESPRIMO Mobile V6505 V6535 V6545 EasyGuide Are there any technical problems or other questions that you would like help with Please contact our Hotline Help Desk refer to the enclosed Help Desk List or go to http ts fujitsu com helpdesk your sales partner your sales office Additional information is contained in the Help Desk list and the Warranty manual The Warranty manual can be found on the supplied Drivers amp Utilities CD DVD The latest information about our products useful tips updates etc is available from our website http ts fujitsu com Published by Fujitsu Technology Solutions GmbH A26391 K248 Z220 1 7619 Edition 1 2009 04 Produced by XEROX Global Services co FUJITSU ESPRIMO Mobile V6505 V6535 V6545 EasyGuide Your ESPRIMO Mobile 1 Important notes 3 Ports and controls Removing and installing components during servicing 15 Technical data 17 Index 19 Adobe and Acrobat are trademarks of Adobe Systems Incorporated and may be protected in certain countries The Bluetooth trademarks are the property of Bluetooth SIG Inc U S A licensed for Fujitsu Technology Solutions GmbH Intel is a registered trademark Core is a trademark of Intel Corporation USA Kensington and MicroSaver are registered trademarks of ACCO World Corporation Microsoft MS Windows and Windows Vista are registered trademarks of the Microsoft Corporation All other tr
8. cables connected to the notebook Turn your notebook over and place it on a stable sturdy flat surface If necessary lay a non slip cloth on this surface to prevent the notebook from being scratched Remove the battery see Section Removing the battery Page 11 gt Insert the SIM card into the slot so that the the chip is facing upwards and the angled corner is at the front right facing towards the slot 1 Make sure you hear the SIM card click into place vvvv v gt Reinstall the battery see Battery inserting Page 11 gt Turn the notebook the right way up and place it on a flat surface gt Reconnect the cables that you disconnected previously 12 A26391 K248 Z220 1 7619 edition 1 Ports and controls Removing a SIM card gt gt gt gt gt gt gt Switch the notebook off and pull the power plug out of the mains socket Close the LCD screen so that it locks into place Disconnect all cables connected to the notebook Turn your notebook over and place it on a stable flat and clean surface If necessary lay an anti slip cloth on this surface to prevent the notebook from being scratched Remove the battery see Section Removing the battery Page 11 Push the SIM card inwards slightly to eject it from the slot 1 gt Pull the SIM card out of the slot in the direction of the arrow 2 Ta 1 Reinstall the batterv see Batterv inserting Page 11 Turn the noteb
9. can be found in the following documentation in the Professional Notebook Operating Manual in the Safety and Warranty manuals e in the documentation for the operating system in information files e g TXT DOC WRI HLP PDF Information on accessories for this notebook can be found at http ts fujitsu com accessories A26391 K248 Z220 1 7619 edition 1 1 Your ESPRIMO Mobile Notational conventions Pay particular attention to text marked with this symbol Failure to observe N these warnings could pose a risk to health damage the device or lead to loss of data The warrantv will be invalidated if the device becomes defective through failure to observe these warnings LE Indicates important information for the proper use of the device Indicates an activity that must be performed This font indicates data entered using the keyboard in a program dialogue or command line e g your password Name123 or a command used to start a program start exe This font indicates information that is displayed on the screen by a program e g Installation is complete This font indicates terms and texts used in a software interface e g Click on Save names of programs or files e g Windows Or setup exe This font indicates cross references to another section e g Safety information cross references to an external source e g a web address For more information go to http ts fujitsu com Nam
10. ce when inserting or removing a batterv Make sure that no foreign bodies get into the batterv connections 10 A26391 K248 Z220 1 7619 edition 1 Ports and controls Removing the battery gt Switch the notebook off and pull the power plug out of the mains socket Yvy Close the LCD screen so that it locks into place Disconnect all cables connected to the notebook Turn your notebook over and place it on a stable sturdy flat surface If necessary lay an anti slip cloth on this surface to prevent the notebook from being scratched A26391 K248 Z220 1 7619 edition 1 Push the battery lock in the direction of the arrow 1 as far as it will go Slide the locking device in the direction of the arrow 2 and hold it in place Remove the battery from the notebook in the direction of the arrow 3 Place the battery in the battery compartment so that the contacts enter first 1 Push the battery into the battery compartment until you feel it click into place Push the battery lock in the direction of the arrow 2 up to the stop 11 Ports and controls SIM card optional This section is only applicable for devices with an optional UMTS module and SIM card slot Follow the instructions supplied by the provider of the SIM card Inserting the SIM card Switch the notebook off and pull the power plug out of the mains socket Close the LCD screen so that it noticeably locks into place Disconnect all
11. es of CDs DVDs and titles or designations of other materials e g CD DVD Drivers amp Utilities or Safety Manual indicates a key on the keyboard e g F10 This font indicates terms and texts that are emphasised or highlighted e g Do not switch off the device 2 A26391 K248 Z220 1 7619 edition 1 Important notes Important notes Take note of the safety hints provided in the Safety manual in the Professional N Notebook operating manual and in this manual Help if problems occur Should vou ever have a problem with vour computer that vou cannot solve vourself in manv cases you can solve it quickly using the SystemDiagnostics program pre installed on your computer To start the SystemDiagnostics programme click on Startsymbol Program Fujitsu Siemens Computers SystemDiagnostics or To start the SystemDiagnostics programme click on Startsymbol Program Fujitsu SystemDiagnostics gt If a problem is detected during the test run the SystemDiagnostics program outputs a code e g DIFS code YXXX123456789123 gt Take a note of this DIFS code and the ID number of your device The ID number can be found on the type rating plate on the back of the casing For further clarification of the problem contact the Help Desk for your country see the Help Desk list or visit the Internet at http ts fujitsu com support For this please have ready the ID number amp serial number of yo
12. ker switching ON OFF 8 M Modem port 4 Monitor port 4 N Notes battery 10 boards 15 e ON OFF switch 4 ON OFF switch for radio components 4 Optical drive 4 P Power on indicator 7 Power saving mode Indicator 7 R Radio components Indicator 7 Index S S Video Out socket 4 Screen brightness decrease 8 increase 9 Servicing 15 Shift Tab 9 Silent Mode 9 Sleep mode activating 9 Status indicators 4 7 T Technical data battery 17 Mains adapter 18 Notebook 17 Toggle output screen 9 Touchpad 4 switching off 8 switching on 8 Touchpad buttons 4 20 U UMTS 14 switching off 8 14 switching on 8 14 USB port 4 V Volume decrease 8 increase 8 Ww Warm reboot 9 Wireless LAN 14 Switching off 14 Switching on 14 WLAN Switching off 8 Switching on 8 A26391 K248 Z220 1 7619 edition 1
13. n the B OS Setup can be switched on and off using the ON OFF switch for the radio components or the key combination Fn F1 Conversely components that are deactivated in the BIOS setup cannot be controlled using the ON OFF switch for radio components or the key combination You can also activate and deactivate the radio components individually in the BIOS Setup You must have assigned the supervisor password in order for this function to be available Pay attention to the additional safety notes for devices with radio components provided in the Safety manual Details on using Wireless LAN can be found in the online help system included in the Wireless LAN software You can find more information on how to use Bluetooth on the CD you received with your Bluetooth software You can obtain more information on UMTS from your service provider 14 A26391 K248 Z220 1 7619 edition 1 Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook Unauthorised N opening or incorrect repair may greatly endanger the user electric shock fire risk and will invalidate your warranty You may remove and install the components described in this chapter yourself after consulting the Hotline Help Desk If you remove and install components without consulting the Hotline Help IN Desk then the warranty of y
14. ocks into place Disconnect all cables connected to the notebook Turn your notebook over and place it on a stable sturdy flat surface If necessary lay an anti slip cloth on this surface to prevent the notebook from being scratched Remove the battery see Removing the battery Page 11 gt Remove the screws 1 gt Lift off the cover 2 Pull the hard disk out of the bay in the direction of the arrow 3 Push the hard disk into the hard disk bay 1 in a straight line Position the cover 2 Secure the cover with the screws 3 gt Install the battery again see Battery inserting Page 11 gt Turn the notebook the right way up and place it on a flat surface gt Reconnect the cables that you disconnected previously 16 A26391 K248 Z220 1 7619 edition 1 Technical data Technical data Notebook Environmental conditions Environmental class 3K2 Temperature Operating 3K2 5 C 35 C Transportation 2K2 15 C 60 C Width x Depth x Height front back 364 mm x 259 mm x 33 44 mm Weight depending on configuration Approx 2 8 kg lil The data sheet for this notebook contains further technical data The data sheet can be found on the notebook or on the Internet at http ts fujitsu com or on the Drivers amp Utilities CD DVD 6 cell rechargeable battery Rated voltage 10 8 V 11 1 V 10 8 V 11 1 V Rated capacity 4 4 Ah 5 2 Ah The opera
15. ook the right wav up and place it on a flat surface Reconnect the cables that vou disconnected previousiv A26391 K248 Z220 1 7619 edition 1 13 Ports and controls Radio components UMTS optional Wireless LAN Bluetooth optional The installation of a radio components not approved by Fujitsu Technology N Solutions GmbH will invalidate the certifications issued for this device see Section Technical data Page 17 Switching the radio components on and off Start the WirelessSelector using the ON OFF switch for the radio components or the key combination Fn F1 The WirelessSelector allows the radio components activated in B OS Setup to be switched on and off individually gt Slide the ON OFF switch for the radio components in the direction of the arrow to start the WirelessSelector or Press the key combination Fn F1 to start the WirelessSelector L The radio component indicator will be illuminated when one or more radio components is switched on If you switch off the radio components the Bluetooth module UMTS and wireless LAN transmission unit antenna will also be switched off You can enable or disable the radio components individually The BIOS Setup allows you to specify which radio components can be switched on and off using the ON OFF switch for the radio components or the key combination Fn F1 Only those components that have been activated i
16. our notebook will be voided Notes on installing and removing boards and components e Switch the notebook off and pull the power plug out of the mains socket Always remove the battery Take care when you use the locking mechanisms on the battery and any other component Never use sharp objects such as screwdrivers scissors or knives as leverage to remove covers Boards with electrostatic sensitive devices ESD are marked with the label A shown fi 4 When handling boards fitted with ESDs you must always observe the following points You must always discharge static build up e g by touching a grounded object before working The equipment and tools you use must be free of static charges Remove the power plug from the mains supply before inserting or removing boards containing ESDs Always hold boards with ESDs by their edges e Never touch pins or conductors on boards fitted with ESDs A26391 K248 Z220 1 7619 edition 1 15 Removing and installing components during servicing Hard disk The hard disk is the most important storage medium of your notebook You can work considerably faster and more efficiently if you copy applications and files from CDs to your hard disk When the hard disk is accessed the hard disk indicator lights up in the status indicator panel Removing the hard disk gt Switch the notebook off and pull the power plug out of the mains socket gt Close the LCD screen so that it l
17. r notebook for the first time Your notebook features the very latest technology so that you get the best performance from your computing experience Depending on the model the following components may be included up to 4 GB of main memory RAM a Multi format DVD drive with double layer support to watch DVD movies and record your own disks e an S Video Out socket for connecting your notebook to your television depending on model e a FireWire port for fast data exchange with multimedia devices an integral camera for snapshots and video chat depending on model e several USB ports which provide easy expansion with webcams game pads printers and more an eSATA USB combination connection in order to connect an external SATA hard disk or another USB device depending on model an internal modem for connecting to the Internet depending on model e an ExpressCard slot for operating an ExpressCard 34 or ExpressCard 54 e a 4 in 1 card reader SD MS MS Pro MMC for rapid transfer of digital photos music and video clips onto your notebook an onboard sound card and stereo speakers for your audio enjoyment With the user friendly B OS Setup you can control the hardware of your notebook and better protect your system against unauthorised access by using the powerful password features This Operating Manual tells you how to get your notebook up and running and how to operate it in daily use Further information on this notebook
18. ting time depends on the device equipment the active applications and the energy saving settings A26391 K248 Z220 1 7619 edition 1 17 Technical data Mains adapter Mains adapter 65 W Use the 65 W mains adapter for the following processors CXXX PXXX T1XXX Electrical data Rated voltage Max rated current Mains adapter 90 W Use the 90 W mains adapter for the following processors T3XXX T5XXX T9XXX Electrical data Rated voltage Max rated current An additional mains adapter or power cable can be ordered at any time 18 A26391 K248 Z220 1 7619 edition 1 Index 5 in 1 card reader 4 A Activate energy saving mode 9 Alt Tab 9 B Back tab 9 Battery 4 important notes 10 Indicator 7 inserting 11 removing 11 Battery release 4 Battery release latch 4 Bluetooth 14 switching off 8 14 switching on 8 14 Board 15 C Camera 4 Switching off 8 Switching on 8 Combined eSATA USB port 4 Components installing removing 15 Ctrl AlttDel 9 D DC input jack DC IN 4 E ESD 15 ExpressCard slot 4 F Fn F1 8 Fn F10 9 Fn F12 9 Fn F3 8 Fn F4 8 Fn F5 8 Fn F6 8 Fn F7 8 Fn F8 8 Fn F9 9 A26391 K248 Z220 1 7619 edition 1 Index H Hard disk 4 Indicator 7 removing 16 Headphones port Line Out 4 I Indicator Battery 7 Hard disk 7 Power on indicator 7 Power saving mode 7 Radio components 7 Indicators 7 K Kensington Lock 4 L LAN port 4 Loudspea
19. ur system and the DIFS code A26391 K248 Z220 1 7619 edition 1 3 Ports and controls Ports and controls This chapter presents the individual hardware components This will provide you with an overview of the ports and controls of the notebook Please familiarise yourself with these components before you start using your notebook I Camera Speakers ON OFF switch Touchpad Touchpad buttons Status indicators 4 in 1 card reader SD MS MS Pro MMC ON OFF switch for radio components Headphones port Line Out 0 Microphone port Line In 1 FireWire port 12 ExpressCard slot 13 USB port or eSATA USB combination port depending on model I I I 1 2 3 4 5 6 7 8 9 1 1 14 Modem port depending on model 15 LAN port 16 Kensington Lock 17 Optical drive 18 USB port 19 USB ports 20 S Video Out socket depending on model 20 VGA monitor port 22 DC input jack DC IN 23 Hard disk 24 Battery A26391 K248 Z220 1 7619 edition 1 Ports and controls Switching on the notebook The battery must be fully charged before running the notebook from the battery for the first time Please note that the first time the battery is charged will require considerably more time than will be needed on subsequent occasions Slide the release button in direction of the arrow 1 and open the LCD screen 2 gt Press the ON OFF switch 1 to switch the notebook on L

Download Pdf Manuals

image

Related Search

Related Contents

  :o.oo6%以 :0.olμ Ω以下 :lA以下 :o.2%以 下 :0.olmΩ 以下 :lmA以 下  INSTALLATION MANUAL MANUAL DE INSTALACIÓN MANUEL D  Téléchargement FDR - Ramsar Sites Information Service  H.264 Überwachungsrecorder der Serie SEC24  My Passport for Mac User Manual  Capítulo 1 - Honeywell Video Systems  

Copyright © All rights reserved.
Failed to retrieve file