Hanns.G ST281MAB 28" Full HD Black LCD TV
Contents
1. r Audio Cable Optional Video Cable Optional Video Cable Optional Audio Cable Optional HANNspree 21 2 2 4 Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown 1 Connect the VGA port of the TV to the VGA output of the PC 2 Connect the line out port of the PC to the PC LINE IN port of your TV to listen to audio from the PC PC LINE IN i gt Audio Cable Optional PC VGA Cable Optional 2 2 5 Connecting a PC using DVI Connect the TV to your PC to use it as the monitor using the DVI port as shown 1 Connect the HDMI port of the TV to the DVI output of the PC 2 Connect the line out port of the PC to the PC LINE IN port of your TV to listen to audio from the PC HDMI 1 HDMI 2 PC LINE IN A Audio Cable Optional BS HDMI to DVI Cable Optional 22 HANNspree 2 2 6 Connecting HDMI HDMI High Definition Multimedia Interface assures that the best video signal is always sent from source to the TV Refer to the following illustration to connect an HDMI device to the TV g esmsar HDMI1 HDMI2 DV2. HANNSpree 31 The Subtitle Type can be set to Normal or Hearing Impaired e The Time selection includes GMT Offset and Summer Time Press lt gt to adjust the GMT Offset to AUTO Germany UK Italy France Spain Netherlands Taiwan China Norway Sweden Finland Greece Australia Russia Ireland Denmark Portugal Turkey or Poland Press lt gt to adjust Summer Time to On or Off Time GMT Offset AUTO gt Summer Time HANNSpree Press gt to enter the Common Interface menu The Parental Rating allows you to select Parental Rating Parental Rating Press the Keypad on the remote control to enter the passwords Press lt gt to adjust the Parental Rating from 4 to 18 or Off 32 Hannspree 3 6 Adjusting PC Settings on fF W N Press INPUT and select PC as the signal type HANNSPrEE Press MENU to enter the OSD Main E i Menu screen aa Clock ee eee Press vy to select the PC menu amp Press gt to enter the PC menu amp 5 Move select Retum Press y w to select an item Press lt gt adjust the scales or options settings Press MENU to return to the PC menu Press MENU to exit the OSD menu the OSD menu The PC menu can be used to adjust the Auto Adjust H Position V Position Phase and Clock settings e The Auto Adjust can be set to On or Off The H Position and V Position can be adjusted by pressing
3. 3 4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu screen re aE 3 rmany 2 Press w to select the Channel menu ichepact 4 15 gt Colour System 4 AUTO gt 3 Press gt to enter the Channel menu a e Manual Search a gt 4 Press to select an item Fine Tune 4 24125MHz gt A v AFC Lock 4 5 Press lt gt adjust the scales or options settings Press MENU to return to the Channel menu 7 Press MENU to exit the OSD menu The Channel menu can be used to adjust the Area Channel Colour System Sound System Auto Search Manual Search Fine Tune AFC Lock Channel Edit and Parental Lock settings 28 Hannspree e The Area can be set to Germany UK Italy Spain Portugal France Hungary Poland Netherlands and Other e Channel can be used to select channels by pressing lt gt e The Colour System can be set to AUTO PAL and SECAM The Sound System can be set to AUTO BG DK I L and L Select Auto Search to activate the automatic TV channel search Select Manual Scan to search the TV channels manually HANNSPIeCe e Press lt gt to adjust the channel frequency in Fine Tune The AFC Lock can be set to On or Off e Press gt to enter the Channel Edit menu the Channel Editor allows you to edit the detailed items including Name Skip Fav and Lock for each channel HANNSpree 29 To change the channel name select the channel and pre
4. Nove Press MENU to return to the DTV menu entry 7 Press MENU to exit the OSD menu The DTV menu can be used to adjust the Channel Management Area Auto Search Manual Search Preferred Audio Preferred Subtitle Parental Lock Subtitle Type Time Cl and Parental Rating 30 pannspree The Channel Management selections include Channel Organizer Channel Sorting Channel Grouping and Delete All TV Channels The Area can be set to Germany UK Italy Spain Portugal France Hungary Poland Netherlands and Other e Select Auto Search to activate the automatic TV channel search Select Manual Scan to search the TV channels manually S No_ Radio Channel Channel Name Frequency KHz Channel 35 UHF 586000KHz 8M A n N S Selec Return e Preferred Audio can be set to English France Germany Italy Spain Portugal Denmark and Czech e Preferred Subtitle can be set to Off English France Germany Italy Spain Portugal Denmark and Czech e The Channel Organizer supports channel swap function To select one channel that you prefer to exchange press the Yellow button on the remote control then press the numeric button on the remote control to input the channel that you want to exchange with press the OK button on the remote control to complete The Parental Lock allows you to change the password Enter Old Password OE G 9 Cancel Note The original password is set to 0000 by default
5. Press to decrease the volume or move to the volume adjust VOL left on the OSD menu Remote IR ery 3 Receive incoming remote control commands sensor Indicate power or standby status power aid e on off represent to Green Red light indicators Speakers Deliver high quality sounds 1 5 Input and Output Jacks Description Connector Function Cable Antenna TVIDTY Connect to an antenna or cable TV 10 Hannspree Description Earphone Output Connector EAR PHONE Function Connect to earphones or external speakers with built in amplifier sain AUDIO Connect to an external device such as a PS np R L vcr STB ora DVD player audio Component Connect to an external device such as a Inputs Video YO gt O PO VCR STB or a DVD player PC Audio Input PC LINE IN Connect to a PC s line audio out port SCART IN OUT FEES 2 ttttttt E SCART IN OUT Connect to an external device such as a VCR STB or a DVD player with AV S Video RGB L R IN Analog TV Out and L R Out VGA PC Input Connect to a PC s VGA port Service service Service only Not available for users Connect to an external device such as a Video Peai VCR STB or a DVD player CI ci Connect to a CI device Connect a HDMI equipment or an HDMI HDMI 1 Input DVI adapter cable to devices such as a ee DVD player or set top box
6. lt gt to move the scales from 16 to 16 e The Clock can be adjusted by pressing lt gt to move the scales from 50 to 50 Phase can be adjusted by pressing lt gt to move the scales from 0 to 31 HANNSpree 33 3 7 Adjusting Setup Settings 1 Press MENU to enter the OSD Main Menu screen HANNSpPree 2 Press v to select the Setting menu ae branes t SCART 4 AUTO gt entry HDMI Scan Info AUTO gt A Aspect lt Full 3 Press gt to enter the Setting menu HDMI Audio ret ens X Contrast 4 Off gt 4 Press y w to select an item GE AN vove ES Retun 5 Press lt gt to change the scales or options settings 6 Press MENU to return to the Setting menu entry 7 Press MENU to exit the OSD menu The Setting menu can be used to adjust the Language TT Language SCART HDMI Scan Info Aspect HDMI Audio X Contrast OSD Time Reset Background and Initail Setup The available Language selections are English Italiano Espa ol Portugu s Frangais Deutsch Magyar Polski and Nederlands The available TT Language selections are West East Hungary Arabic and Farsi e The SCART selections include AUTO CVBS RGB and S VIDEO The available selections in HDMI Scan Info are AUTO Overscan Underscan Available only when signals are provided via a HDMI connection The available Aspect selections include AUTO Full Normal Panorama Zoom Subtitle and Wide The avai
7. Connect a HDMI equipment or an HDMI HDMI 2 Input DVI adapter cable to devices such as a DVD player or set top box HANNspree 1 1 Description Connector Function Power Connector E AC IN Connect to the included power cord 1 6 Remote Control Description Icon Function Power l Press to turn the TV on or off ick Signal Press to select the input signal type selections T a 9 INPUT TV DTV SCART AV HDMI 1 HDMI 2 HDTV yP and PC 123 Use to select a program directly Press 0 9 to Keypad 3 2 enter the program numbers press 1 and 0 for o program 10 Pro List Pro LIST Press to display the features contained LAST Last Press to return to the last channel selected O 1 Press to display current channel program information Information INFO 2 During DTV menu selection press to display help information about Channel Organizer Channel Sorting Channel Grouping Time and Parental Rating Press to turn the on screen display OSD Menu MENU menu on off OK OK Press to confirm selection 12 HANNSpree Description Icon Function eres ave Press up down left or right to scroll through the on screen display menus EISE ONIG Press to display detailed programming Program EPG i information for channels only for DTV Guide Teletext mode TEXT Press to active teletext Press VOL to increase audio volume Volume adjust VOL VOL Press VOL to decrease
8. D Player HDMI Cable Optional Note When the HDMI cable is connected connecting the audio cable is not necessary However it is necessary to do so if a HDMI to DVI cable is connected 2 2 7 Connecting USB Service port for DVT F W update only USB Drive Optional Hannspree 23 2 2 8 Connecting a VCR STB DVD Player using SCART Connect the SCART optional to connect a TV VCR VCD DVD player or video game console You can choose to use a SCART cable or adapter for the connection depending on the ports available on your player FARA t 4444 E SCART SCART SCART Cable Optional Connect to AV connectors Connect to S video connectors Note e The S Video connector and AV connectors cannot be connected at the same time or the wrong signals might be generated e The cables are color coded black red white and yellow Connect each color coded cable to the appropriate connector on your device 24 HANNSpree 2 3 Using the TV 2 3 1 Turning the TV On and Off 1 Press l on the control panel or remote control The power LED indicator on the TV changes from red to green indicating that the TV is on 2 Press d again The power LED changes from green to red indicating that the TV is off 2 3 2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal 2 3 3 Performing an Automat
9. Scan Info AUTO highlighted by Aspect Full a dark blue HDMI Audio HDMI X Contrast Off color than ee other menu items select ADJUSTABLE Options INSTRUCTIONS Displays the setting value Quick instructions for of the adjustable options adjusting the settings Function TV Control Panel Remote Control OSD Menu MENU MENU Up PA Arrow WN Down PV Arrow V Select Increase VOL Arrow gt Select Decrease VOL Arrow lt Return MENU MENU 26 nannspree 3 1 OSD Setting Menus Follow the instructions indicated on the down side of the OSD Function Menu Press PA PVYon the control panel or A yy arrow keys to scroll through the menus VOL on the control panel or the gt arrow key to select an item or MENU to exit the OSD menu The following menus can be set by different adjustment methods 3 2 Adjusting Picture Settings 1 Press MENU to enter the OSD Main Menu HANNSpree screen The Picture menu is then p Picture Mod Standard displayed ee Contrast SS Sharpness Ss Colour SS a Hue i Backlight 2 Colour Temp 2 Press gt to enter the Picture menu aZeonee 3 Press A w to select an item 4 Press lt gt to adjust the scales or options settings Standard 5 Press MENU to return to the Picture menu 6 Press MENU to exit the OSD menu The Picture menu can be used to adjust the Picture Mode Brightness Contrast Sharpness Colour Hue Backlight and Co
10. Table of Contents Regulatory Information sacs ccsetuaie tn Qencsidievewe trae ncceerivas Mnatienceteatalte 3 Description of Warning Symbols cccceceeeeeeeeeceeeeeeeeeeeeeeees 3 Safety INDUCES asssnsrenar ene Nicos deecocd adden dade EEEE E 4 TAG erat ach ce tee aaa aaa ecacteahia tele adia 6 Warranty and Service aaictrtcncceetseaentatetdee eres 6 Getting Started siancscerctaesassnacuctsreduslutannatuesanidtublyataibieseslbatatauiasbnauntnetadhed 8 Package Contents s ssssrsscsrrseersrrossrrrsesrrrasenerrresrnnse 8 Introducing the TV ssvsictecsndnartatalanatictiedeaiiindedeeniatenbunatadies 9 FEAtUTOSorrrir rinapi nn ca NEER EEEE EAEE EKNK ETNEA EEEIEE 9 Control Panel ierisorairareasies raiak 10 Input and Output Jacks ccc eee ec eee eeeeeeee ees 10 Remote Control ssssssssssesrsrrossrrerecrsrrosrerroesrrreeennnno 12 Inserting the Remote Control Batteries 16 Setting up your TV reris eaa A A E Ei 18 Basic Connections ssssessssssssrrsreerrrrosrnrrossrreseeneneo 18 Power Connection sarc incrceccttectsantimetsenannentvackineteacees 18 Connecting an Antenna or Cable TV 18 Connecting External Devices 19 Connecting External Earphones seese 19 Connecting to AV Devices cc eceeceeeeeeeee eee eee 20 Connecting a VCR STB DVD Player Using Compo nent VideO 2a ec encentatcoraeihedpaabhentonseadonsssacdonakeae 21 Connecting a PC using VGA wiciscicsccs
11. audio volume Press to eliminate sound Press it again or MUTE Mute K press the volume adjust buttons to restore sound puaKesund l I Press to change the multi sound selection of d the TV channel Select Press PA to increase the program number PA PY program Press PW to decrease the program number Red Green eo Ce Press the colored buttons to perform specific Yellow Blue tasks in the OSD menu or teletext mode Press to display a table of the available teletext Index INDEX subjects Programmable in the teletext mode only Press to display the teletext over the program MIX A Mix on the screen Programmable in the teletext mode only Adiust size SIZE Press to adjust screen size Programmable in J the teletext mode only Hannspree 13 Description Icon Function With an ATV source if teletext mode is activated and the teletext has a subtitle page Subtitle SUBTITLE press to display the subtitle page With a DTV source press to display the subtitle OSD and select the language Press to inactivate automatic page change Hold HOLD which only occurs when more than one teletext page exists Programmable in the teletext mode only REVEAL Press to display the hidden information such Reveal a as solutions to puzzles Programmable in the teletext mode only SOUND Press continuously to toggle through all the Sound Mode sound setting Standard Music Movie Speech or User i PIC Press cont
12. by operation of law in the sale of a product Trademark Notice Hannspree products incorporate High Definition Multimedia Homi Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HANNspree 7 Getting Started 1 1 Package Contents Make sure the following components are included in the box Please contact Hannspree Customer Service immediately if anything is missing or damaged e TV e Users manual e Quick start guide e Warranty card Power cord e Remote control and batteries e TV cleaning cloth ME61 According to WEEE regulation this TV can t be handled as normal trash in Europe when it is out of usage Please refer to the recycle information from our website to handle it As an ENERGY STAR Partner Hannspree has determined that this product meets the ENERGY STAR guidelines for energy efficiency 8 Hannspree 1 2 Introducing the TV You can watch SECAM PAL DVB T broadcast cable or digital television channels and easily connect a VCR STB or DVD player to the SCART HDTV Component AV Composite and HDMI input ports location of these ports depends on model You can also use the TV as a monitor for your PC by connecting it through the VGA port Convenient control buttons located on the TV and a handy remote control let you change channels adjust the volume and change display settings th
13. csicveeaisneneensens 22 Connecting a PC using DVI eect ee eee 22 Connecting HDMI coc sscctcstnterunendeecacmnensteonlnecacwnrnts 23 Connecting USB sckscccccgaandeugecsebedcisesGendpdanebasiaiebens 23 Connecting a VCR STB DVD Player using SCART 24 Using the TV acecdsats ccttanteseiidacentiedtemetiandeneetseniaetianste 25 Turning the TV On and Off aaeeea 25 Switching Source Signals a 25 Performing an Automatic Channel Search 25 Selecting Channels ccc ecceeececeeeeeeeeeeeeeeeeeenee 25 HANNSpree 1 Table of Contents Adjusting the Volume csceeeeneneeeeeeeeeee ee 25 Adjusting On Screen Display OSD Settings ee 26 OSD Setting MenuS sccvedrecaceninaicontiesinvecscsctenarnestweaie 27 Adjusting Picture Settings sic siiipaceccsecnanecd orien cadinde anes 27 Adjusting Sound Settings eeceeeeeneeeeeeeeeees 28 Adjusting Channel Settings 0 ccseseeeeeeeeeeee eee 28 Adjusting DTV Settings scscescccnetiectenedraneeetebiaasanctsecnis 30 Adjusting PC Settings 0 ccceceeeeeee ee eeeeeeenereee ees 33 Adjusting Setup Settings sce cccciseticswiecstewvecssiacticnkiinenes 34 Troubleshooting anini EE ak 36 Support Timing srei eikon a an E E ea Ea 37 SpecIfCatONS kesise eaea aaea a a Eee a a ra 38 Dissembling the stand base ccceeeesseeceeeeeeeneeseeeeeseeeeeeeees 39 Using the Cable Organizer 22 cccsesssecccceeeeeeeneeeee
14. d service personnel Customers should not attempt to do the work themselves Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall HANNSpree 39 Using the Cable Organizer Route the cables through the cable clamp as shown 40 Hannspree
15. e Support Timing PC Mode Support Timing Mode Resolution Horizontal Vertical Nominal Pixel PC VGA DVI to HDMI active dot Frequency KHz Frequency Hz Clock MHz VGA 640x480 60Hz 31 469 59 941 25 175 v v SVGA 800x600 60Hz 37 879 60 317 40 v v XGA 1024x768 60Hz 48 363 60 004 65 v v VESA 1280x720 60Hz 44 955 59 94 74 176 v v VESA 1280x960 60Hz 60 60 108 v v SXGA 1280x1024 60Hz 63 981 60 02 108 v v WXGA 1440x900 60Hz 55 935 59 887 106 5 v v 1920x1080 60Hz 66 587 59 934 138 5 v v VESA Reduced Blanking WUXGA 1920x1200 60Hz 74 083 60 154 v To acieve the best performance in the PC Mode 1920x1200 connect the HDMI cable to the PC Video Mode Support Timing Resolution active dot HDMI HDTV Component 640x480p 60Hz 720x480i 60Hz 720x480p 60Hz 720x576i 50Hz 720x576p 50Hz 1280x720p 60Hz 1280x720p 50Hz 1920x1080i 50Hz 1920x1080i 60Hz 1920x1080P 24HZ 1920x1080P 25HZ 1920x1080P 30HZ 1920x1080P 50Hz 1920x1080P 60Hz HANNSpree 37 Specifications Screen Size 28 LCD Panel 1920x1200 Input Function RF In SCART AV Component Component Audio RCA in HDMI x 2 VGA VGA PC Line in Cl support 5V Output Function Earphone Out Speaker 10W 10W SCART Out Feature Full HD HD Ready 3D Combo Filt
16. ease refer to the Warranty Card enclosed with your TV 6 Hannspree Copyright Copyright 2009 Hannspree Inc All rights reserved This manual is protected by copyright and distributed under licenses restricting its use copying and distribution No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree The TV described in this manual may include copyrighted software of Hannspree or other third parties Hannspree or other third parties preserves the exclusive rights for copyrighted software such as the right to distribute or reproduce the copyrighted software Accordingly and to the extent allowed by applicable law any copyrighted software contained in the product described herein shall not be distributed modified reverse engineered or reproduced in any manner without the prior written authorization of Hannspree or of other third parties The Hannspree logos presented herein are trademarks of Hannspree All other product names trademarks or logos mentioned herein are used for identification purpose only and may be the trademarks or registered trademarks of their respective owners The purchase of the product described herein shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents patent applications or trademarks of Hannspree except for the normal non exclusive use that arises
17. er 3D De Interlacer Noise Reduction 3 2 2 2 Pull down X Contrast 10000 1 24p input 38 pannspree Dissembling the stand base 1 Disconnect all the cables and cords from the TV to prevent breakage 2 Carefully place the TV face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the TV 3 as the sides to release the retaining plastic tabs and pull the stand cover off 4 Remove the six 6 screws so that the stand base can be removed 5 Gently remove the stand base AACS A A HANNSpree For reference only Wall mounting the TV TA 1 Purchase a VESA compatible wall bracket HANNspree VESA 100 X 200 6 holes M4 8mm 20 kg Ea 2 Locate your ideal TV position on the wall Fix the wall bracket firmly on the wall 4 Secure the TV to the bracket using the 6 mount holes on the back and center of the TV w Note e Please read the instructions of your specific wall bracket to properly wall mount the TV e The pitch of the mounting holes is 100mm horizontally and 100mm vertically e The screws type required is metric M4 8 mm length e The 28 TV stand base can be screwed on a table or a hard surface using the hole on the back of the stand base Installing the LCD TV requires special skill that should only be performed by qualifie
18. ic Channel Search Before using the TV to view programs you need to activate the channel search first 1 Press MENU on the control panel or remote control then select to enter the Channel menu 2 Select Auto Search 3 Press gt on the remote control to run the channel search 2 3 4 Selecting Channels e Press PA on the remote control or control panel to increase the channel number e Press PY on the remote control or control panel to decrease the channel number Enter the specific channel number by pressing the number buttons on the remote control 2 3 5 Adjusting the Volume 1 Press VOL on the control panel or remote control to increase the volume 2 Press VOL on the control panel or remote control to decrease the volume 3 Press MUTE to eliminate sounds and press MUTE again or press the volume buttons to restore the original volume Hannspree 29 Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust the TV settings The OSD menu can be accessed conveniently through the buttons on the remote control Before going into details of each OSD option you may get acquainted with the placement of the OSD system CURRENT MENU Displays the title of the currently selected menu MAIN MENU HANNSPpree Displays a list of menu items Language English mo at TT Language West The selected SCART AUTO item is ma HDMI
19. inuously to toggle through all the Picture Mode m picture setting Vivid Soft User Standard Press to open favorite list menu and press aran PAN A v to select channels Press OK to go to alee Q the selected channel FREEZE Press to pause a video frame on screen n Programmable in the TV source only Press repeatedly to set the sleep timer 15 30 Si endmer SLEEP 45 60 90 or 120 minutes P Cancel the timer by selecting the Sleep Off option ASPECT Press to adjust the width to height ratio of the Aspect ratio image with aspect ratio AUTO Full Normal IE Panorama Zoom Subtitle and Wide 14 HANNSpree Note e For best results use the remote control within a proper distance from the front of the TV Do not exceed an angle of 30 degrees when pointing at TV e The operational distance may be shortened when the signal sensor is directly exposed to strong light e Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them HANNspree 15 1 7 Inserting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control A 2 Insert the batteries paying attention to the polarity markings inside the battery compartment B 16 Hannspree A CAUTION If the remote control is not used for a long period remove the batteries and store them properly Handle damaged or leaking batteries carefully and wash hands w
20. ith soap if they come in contact with leaked chemical fluids If your remote control has two batteries do not mix new and old batteries or the life of the new batteries will be shortened Chemical fluids may leak from the old batteries Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the equipment manufacturer Discard used batteries according to manufacturer s instructions Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries The remote control cover may have a magnet in it so do not place magnetic sensitive items such as watches credit cards or flash media close to the cover Do not use force when pulling the remote control cover open you may damage the hinge HANNspree 17 2 Setting up your TV 2 1 Basic Connections 2 1 1 Power Connection Connect the power cord to the AC IN input jack on the rear of the TV Insert the plug at the other end of the power cord into a power outlet 1 2 2 1 2 Connecting an Antenna or Cable TV Connect one end of the VHF UHF Antenna or CATV cable to TV DTV jack on the rear of the TV Antenna PL Ground Clamp Coaxial Cable Ground Note e Images are for illustration only and may vary by model or region e If you cannot receive channels after connecting to an antenna or cable TV line try scanning for channels 18 nannsp
21. lable HDMI Audio selections include HDMI and Analog In Available only when signals are provided via a HDMI connection e The X Contrast can be set to On or Off OSD Time can be set to 10 Secs 20 Secs 30 Secs and 60 Secs e Select Reset Setting to reset settings to the defaults Background can be set to Blue or Off e Select Initial Setup to do Channel auto search 34 pannspree The Aspect mode selections include Auto Full Wide Normal Subtitle Zoom and Panorama The following pictures are settings for HDMI 1080P please see below for details Type 4 3 16 9 Content i C r O E AUTO p O 7 Full gt C Wide j gt Nomal O Subtitle C Zon MD O O Panorama O n Note The options available on the OSD may vary depending on the input signal source HANNSpree 35 Troubleshooting Situation Solution No picture and sound Connect the power cord properly Check if the power LED is on or not Press O on the control panel or remote control Press Input to cycle through connected video sources Press PA or P to switch to other TV programs Make sure all cables are connected properly No picture or poor picture sound is OK Check the antenna and cable connections Adjust the brightness in the Picture OSD menu Pict
22. lour Temp settings e The Picture Mode can be set to Standard Vivid Soft or User The Brightness Contrast Colour and Hue NTSC only can be adjusted by pressing lt gt to move the scales from 0 100 e The Sharpness can be adjusted by pressing lt gt to move the scales from 0 9 e The Backlight helps to manually turn down the backlight in dark scenes generating a deeper black color Press lt gt to adjust the scales from 1 10 The Colour Temp can be set to Standard Warm or Cool Note The options available on the OSD may vary depending on the input signal source HANNSpree 27 3 3 Adjusting Sound Settings 1 Press MENU to enter the OSD Main Menu screen ee 2 Press vy to select the Audio menu cane i 3 Press gt to enter the Audio menu z Bass Ss 4 Press A vy to select an item 5 Press lt gt adjust the scales or options settings 6 Press MENU to return to the Audio menu 7 Press MENU to exit the OSD menu the OSD menu The Audio menu can be used to adjust the Sound Mode Balance Treble and Bass settings e The Sound Mode can be set to Standard Music Movie Speech or User The Balance can be adjusted by pressing lt gt to move the scales from 50 to 50 The Treble and Bass can be adjusted by pressing lt gt to move the scales from 0 100 Note The options available on the OSD may vary depending on the input signal source
23. neeeeenensenscees 40 2 HANNSpree Regulatory Information CE Conformity Statement This device is in conformity with the requirements of EU Council Directive 2004 108 EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006 95 EC on the harmonization of the laws of Member States relating to electrical equipment for use within certain voltage limits Hannspree cannot accept responsibility for any failure to satisfy the requirements resulting from a non recommended modification of the device Description of Warning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert users This symbol is used to alert users to pay attention to important to the risk of electric shocks due descriptions regarding usage to dangerous and uninsulated maintenance repair and components additional important information related to this TV HANNspree 3 Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat AN WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the appa
24. pulling on the power cord Installation 1 Do not place the TV in locations where there is excessive steam or dust 2 Avoid blocking the TV s vents do not place the TV on a bed sofa carpet or in a sealed cabinet 3 Install the outdoor antenna away from power transmission lines to avoid possible danger HANNspree 5 Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television LCD TV Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology Please carefully read this manual in its entirety before setting up using or operating your TV To ensure the safe and correct installation and operations of the TV it is important that the safety and operation instructions in this manual are followed This instruction manual is designed to assist you in setting up and using the TV The information in this manual has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this manual is subject to change without notice To the extent allowed by applicable law Hannspree Inc Hannspree shall not be liable for direct indirect special exemplary incidental or consequential damages arising from any defect or omission in this manual even if advised of the possibility of such damages in advance EJ Warranty and Service For complete warranty service information pl
25. ratus AN CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Notes e The LCD TV is for entertainment use only and visual display tasks are excluded e This device uses a VGA connector to connect to a PC To reduce the influence of main frequency on the source signal use a VGA monitor cable with ferrite shield 4 HANNSpree Personal Safety 1 To avoid overloading the power supply never plug too many electrical devices into an outlet power strip or extension cable 2 Dangerous high voltage electric power components are located inside the TV To avoid electric shock do not disassemble the casing 3 Do not place or drop metals small objects or flammable materials into the vent of the TV 4 If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and contact an authorized service technician 5 If any fluid is sprayed or dropped into the TV contact an authorized service technician 6 The screen of the TV is made of glass Avoid hitting or scraping it If the screen is broken do not touch the broken glass 7 Do not allow children to use the TV unattended 8 Be careful when disconnecting the power plug Hold the plug Do not attempt to disconnect the plug by
26. ree 2 2 Connecting External Devices Connect external devices such as VCRs STBs DVD players video game consoles earphones or a PC to the TV using the appropriate ports on the rear of the TV 2 2 1 Connecting External Earphones Headphones Speakers Built in Amplifiers External speakers or headphones are not included with the TV e The internal TV speakers will not output sound when headphones are plugged in e Use external speakers with built in amplifiers only e Only one external device for sound can be connected at a time HANNspree 19 2 2 2 Connecting to AV Devices The following diagram illustrates how to connect the AV devices to your TV via HDMI A Component AUDIO B SCART C VIDEO AUDIO D ports f TEREE gt F SCART Adapter Optional Video Cable Optional HDMI Cable Audio Cable Audio SCART Audio Video Optional Optional a Cable Cable Optional Optional Optional peony Video Game Console _ g Note The audio ports shown in Component B and Video Audio D are physically the same ports Only a set of the audio ports can be selected when connecting AV devices 20 HANNSpree 2 2 3 Connecting a VCR STB DVD Player Using Component Video Connect the TV to a VCR STB DVD player using the component video inputs AUDIO RO Qu
27. rough an easy to use on screen display menu system The built in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system or earphones 1 3 Features e TV Tuner Built in TV Tuner e Teletext TV RF SCART 1 5v e Audio Video support with 500 pages memory SCART inputs e Built in stereo speakers VGA PC input e Image Enhancement Technology HDMI inputs 3 2 2 2 pull down HDTV Component input 3D Comb Filter RIL audio inputs HD ready TV PC line input e Noise Reduction 3 5mm stereo earphone e Advanced 3D de interlacing output e Edge Enhancement AV Composite input e On Screen Display OSD menu system Note The supporting devices mentioned in this manual may vary on different models For more information please refer to the manufacturer s user manual or the Quick Start Guide of your TV model HANNSpree 9 1 4 Control Panel Description Button Function Power l Press to turn the TV on or off Input source INPUT Press to select the proper input source Menu MENU Press to open the OSD menu Press to increase the program number or Program select PA move upward to the previous item on the OSD menu Press to decrease the program number or Program select PV move downward to the next item on the OSD menu Volume adjust VOL Press to increase the volume or move to the right on the OSD menu
28. ss lt gt to open Channel Editor Input the channel name you prefer using the on screen keys and select Save HANNSpree a damana 223 25 Off 2 so ee eee oma o on DOB8080800 NONNE E eo BOGOOgnoOon denin To oma Do o ooppocnonon magau s o ma o o DOORBne0e0o HGOHE i ES ca eE Anun 0 301 90 off Mo Rne e how CU oe ee ot Woe Ente reum Press the Red button on the remote control to skip the channels Press the Green button on the remote control to delete the channels Press the Yellow button on the remote control to swap the channels Press the Blue button on the remote control to lock the channels Press the Up Down button on the remote control to move the channels Press the Left Right button on the remote control to rename the channels Press the FAV button on the remote control to add favorite channels Press the Menu button on the remote control to exit Channel Editor The Parental Lock allows you to change the password Press the Keypad on the remote control to enter the passwords Note The Channel Settings are only available in TV mode 3 5 Adjusting DTV Settings 1 Press MENU to enter the OSD Main Menu screen HANNSpIee 2 Press yy to select the DTV menu entry ree ee ee Auto Search gt 3 Press gt to enter the DTV menu aa E 4 Press A w to select an item E Per as ee 5 Press lt gt to change the scales or i options settings
29. ure is not in color Adjust the colour option in the Picture OSD menu Picture is OK no sound Make sure the source device is functioning properly Make sure the audio cable is connected securely Turn the mute off Press VOL on the control panel or remote control One of the speakers has no sound Adjust the balance in the Audio OSD menu Cannot receive some TV channels using cable TV Try the Auto Search function in the Channel or DTV OSD menu Want to reset TV settings Use the Reset function in the Setup OSD menu Cannot operate menus If OSD items are colored in gray the system is in a state such that those settings are not available Screen image turns over Make sure the video signal cable is connected properly Snow appears on the screen Adjust the location of the antenna placing it far from roads or sources of interference Check the antenna and the video signal line connections Blurred or overlapped images Adjust the sharpness setting Choose programs with high quality signals Adjust the direction of the antenna or replace the video signal cable Remote control doesn t work Make sure the battery is inserted correctly Replace the battery with a new one Make sure the TV power cord is plugged in Make sure the path between the remote control and the sensor is clear Try operating the remote control at a closer distance to the TV 36 Hannspre
Download Pdf Manuals
Related Search