Philips Wireless TV link SLV4200
Contents
1. 5 b Plug the adapter into the power outlet 2 Connect the remote control blaster cord F to the IR socket 3 Position the blaster light in front of the video source Just put it in front c The green LED on the front panel of the IR sensor on the front panel should be on Note See the FAQ How can find the IR sensor on the video source for locating the IR sensor on the front panel of the video source Check that TVI is working well a Switch on TVI b Check that TVI is working well c Switch on the connected video source for the video source chosen d Check if TVI shows the image of the video source Preparation gt The transmitter is connected Switch on the transmitter A correctly 3 3 Connect receiver 3 2 The remote control blaster cord Install the remote control blaster cord transmits IR signal to Source devices Switch off the transmitter A Getting started Switch on the Video source Take these items e Receiver B Power adapter E Remote control of the video source Go to TV2 I Connect the receiver to the second TV TV2 Plug the SCART cable of the receiver B into the SCART port of TV2 2 Connect the power adapter a Take the supplied power adapter E to plug the connector into the DC 9V power connector on the Receiver B b Plug the adapter into the power outlet c The2. to the output of the VCR Connect the receiver B to the input of TV2 e To switch TV channels on TV2 switch the channel on your VCR 6 Information 6 1 Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge subject to proof of purchase provided the fault has not been caused by improper handling or use and provided the product has not been damaged whether as a result of an accident or of repair by others than the manufacturer 6 2 Glossary CVBS Video standard for showing colors on a TV Easylink Gives a VCR or DVD recorder the possibility to automatically take over the preset programming of the TV RCA Separate connectors to connect audio video equipment RF technology Technology based on radio frequency used for wireless connections SCART Single connector to easily connect audio and video equipment 16 Glossary 7 INDEX Channel 12 Connect receiver 10 Connect transmitter 9 Enjoy 11 Frequently asked questions 14 Getting started 9 Information 16 Interference 12 Overview of the Wireless TV link 7 Remote control blaster cord 10 Technical Data 13 What s in the box 7 Your Wireless TV link 7 INDEX Declaration of Conformity PHILIPS AQ95 56F 1158 report No EC DECLARATION OF CONFORMITY We Philips Consumer lifestyle BU P amp A Building
3. SFF5 manufacturer s name P O Box 80002 5600 JB Eindhoven The Netherlands manufacturer s address declare under our responsibility that the electrical product Philips SLV4200 12 name type or model Wireless Analog TV link product description to which this declaration relates is in conformity with the following standards IEC60950 1 2005 2nd edition EN60950 1 2006 EN 301 489 1 V1 8 1 EN 301 489 3 V1 4 1 EN 300 220 1 V2 1 1 EN 300 220 2 V2 1 2 EN 300 440 1 V1 2 1 EN 300 440 2 V1 2 1 EN62311 title and or number and date of issue of the standards following the provisions of 1999 5 EC R amp TTE Directive and is produced by a manufacturing organisation on ISO 9000 level yA MCA Eindhoven 20 05 2009 K Rysman Approbation manager place date signature name and function PHILIPS 2009 Koninklijke Philips Electronics N V All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner 2 OY Document number SLV4200_12_EN_UM_VI 1 SO 145 142000002 master EN Printed in China
4. change the channels in case of interferences 2 Set the CHANNEL switch to a different number on the transmitter A in case of interferences 3 Find the CHANNEL switch on the receiver B 4 Set the CHANNEL switch to the same number as on the transmitter A 3 7 Improve the quality of the reception with the antenna Adjust the orientation of the antenna of the receiver for best picture Best transmission performance you obtain when the front sides of the transmitter and receiver antennas are faced to each other in an imaginable straight line Getting started 4 Technical Data Transmitter System RF TV LINK Modulation FM Weight 0 27kg Dimensions 120X182X40 2mm Carrier Frequency 5750 5855MHz Channels 4 Radiated Output Power 25mW Effective Transmission Range 35m Audio Input level 2V Video Input level 1 1V Power requirements 9V 500mA IR Extender Receiver RF Frequency 433 92MHz Receiving Sensitivity 90 98 dBm IR carrier Frequency 30 57kHz IR LED Operation Range 2 3m Receiver System RF TV LINK Weight 0 33kg Dimensions 120X182X40 2mm Playback frequency range 5750 5855MHz Channels 4 Audio S N ratio 50dB at 15m Video S N ratio 43dB at 15m Audio Output level 2V Video Output level 1V Video Frequency Response 50Hz 5 5MHz Technical Data Audio frequency response 40Hz 5kHz Power Requirements 9V 500mA IR Extender Transmitter IR Freq
5. green LED on the front panel should be on Getting started Note if it is not the case press the ON OFF switch on the back of the product 3 Set the CHANNEL switch to the same channel number as on the transmitter A 3 4 Enjoy All the operations listed on 3 1 and 3 3 should have been done l Switch on TV2 2 Switch on the receiver B 3 Select the correct SCART input on TV2 4 Point the remote control of the video source to the receiver B 5 Operate the video source with its remote control 6 Check if TV2 shows the image of the video source gt The receiver is connected correctly Note If the VCR or DVD recorder records a television program you watch the recorded channel Note how to watch a video source on TVI Use your TVI and your video source as usual to watch a video source on TVI Note In case the video source does not react the IR control blaster might not be installed properly See the FAQ How can find the IR sensor on the video source for locating the IR sensor on the front panel of the video source 3 5 Switch between the two video source images by pushing the source switch on the Transmitter Select Source 3 6 Depending on your specific situation after completing 3 1 and 3 3 you may experience some interference Remove interference on TV2 l Find the CHANNEL switch on the transmitter A There are 4 channels You may have to
6. v NL v AT v PT v RU y SE v UK v NOv DE v CH v PL v SK Y ICZ v Class identifier This is a class product We Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC You can find the Declaration of Conformity on www p4c philips com Important 1 3 Disposal instructions for old products Recycling and disposal The WEEE directive Waste Electrical and Electronic Equipment 2002 96 EC has been put in place to ensure that products are recycled using best davailable treatment recovery and recycling techniques to ensure human health and high environmental protection Your product is designed and manufactured with high quality materials and components which can be recycled and reused Do not dispose of your old product in your general household waste bin z Use one of the following disposal options Dispose of the complete product including its cables plugs and accessories in the designated WEEE collection facilities 2 2 If you purchase a replacement product hand your complete old product back to the retailer He should accept it as required by the WEEE directive Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol Packaging information Philips has marked the packaging with standard symbols designed to pro
7. Register your product and get support at www philips com welcome SLV4200 EN Wireless TV Link PHILIPS Table of contents I Important 4 L1 Power requirements 4 1 2 Conformity 4 1 3 Recycling and disposal 5 1 4 Electric Magnetic and Electromagnetic Fields EMF 5 1 5 Installation requirements 6 2 Your Wireless TV link 7 2 1 What s in the box 7 22 Overview of the Wireless TV link 7 3 Getting started 9 3 1 Connect transmitter 9 3 2 Install the remote control blaster cord 10 3 3 Connect receiver 10 3 4 Enjoy I 3 5 Select Source 12 3 6 Remove interference on TV2 12 3 7 Improve the quality of the reception with the antenna 12 4 Technical Data 13 5 Frequently asked questions l4 6 Information 16 6 1 Warranty 16 6 2 Glossary 16 7 INDEX 17 8 Declaration of Conformity 18 Table of contents Important Take time to read this user manual before you use your wireless TV link It contains important information and notes regarding your wireless TV link I Power requirements Connect the power adapters only toa 100 240V AC 50 60Hz power supply e The Electrical network is classified as hazardous The only way to power down the charger is to unplug the power supply from the electrical outlet Ensure that the electrical outlet is always easily accessible A Warning To avoid damage or malfunction e Do not expose the wireless TV link
8. ced by microwave ovens Bluetooth Wifi etc Therefore the product can suffer from the same kinds of interference as GSMs portable radios and other RF based products Important 2 Your Wireless TV link Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome 2 1 What s in the box A Transmitter B Receiver PHILIPS C SCART D RCA SCART E Power F Remote control G User manual cable cable adapter 2x blaster cord 2 2 Overview of the Wireless TV link Transmitter A Control and display elements SOURCE switch Your Wireless TV link 7 Transmitter Ges Control and display elements ONAUAWN 9 green on source green on source 2 Power on off switch Power input connector DC 9V RCA cable entry Antenna Wireless channel selection switch gt Select from 4 available channels Remote control blaster cord port 10 SCART cable entry Control and display elements Power light gt green on Power on off switch Power input connect
9. e receiver B and transmitter A restricts the distance Interference in the image on TV2 Slightly change the position of the receiver B or the transmitter A Change the wireless channel that is used for communication See Remove interference on TV2 on page 12 e The receiver B is out of range of the transmitter A The number of walls and ceilings between the receiver B and transmitter A restricts the distance The video sources do not respond to the remote control commands from TV2 e Point the remote control directly to the receiver B e Replace the batteries of the remote controls with new ones e Install the remote control blaster cord F See Install the remote control blaster cord on page 10 Note The maximum operating distance of the remote control is 7m Buzzing sound when you use the remote control e Slightly change the position of the receiver or the transmitter until the buzzing sound stops Frequently asked questions Easylink feature does not work e Check if the TV and VCR support Easylink e Check if you used full wired SCART cables Black and white image with S VHS VCR Super Video Home System Video Cassette Recorder Check if the SCART connector of the S VHS VCR gives signal in CVBS Composite Video Broadcast Signal See its user manual How can find the IR sensor on the video source The blaster light needs to be positioned precise
10. ly on the IR sensor of the video source Some equipments have the letters IR at the front indicating the location of the IR sensor In case there is no indication the position can be found by moving the blaster light slowly over the front of the video source while a 2nd person operates the remote control at the location of TV2 At least make sure that the remote control is out of range of the video source When the video source starts to react the IR sensor location is found Mount the blaster light on this location at the front of the video source e Another possibility is to move the remote control over the front of the video source while operating it Once the video source starts to react the location of the IR sensor is found This method is less accurate and does not work for each remote control model Also consult the documentation of your video source to locate the IR sensor Frequently asked questions How can I watch a different channel on TVI and TV2 simultaneously e Watching two different channels is only possible if you use two tuners For example TVI uses its internal tuner and TV2 uses the tuner of the VCR For switching channels on TV2 you switch then between the channels stored in the VCR Note that this is not possible when you have a digital cable Connect your antenna cable to both your TVI and your VCR e Search for the TV channels on your VCR and store them in your VCR Connect the transmitter A
11. mote the recycling and appropriate disposal of your eventual waste Important A financial contribution has been paid to the associated national recovery amp recycling system The labeled packaging material is recyclable Electric Magnetic and Electromagnetic Fields EMF Philips Royal Electronics Manufactures and sells many consumer oriented products which usually as with any electronic apparatus have the ability to emit and receive electro magnetic signals One of Philips leading Business Principles is to take all necessary health and safety precautions for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early Integration in its products 1 5 Installation requirements The product transmits and receives radio waves when it is switched on The product complies with the standards that are defined for it As the product is based on RF technology the quality of the image can be influen
12. or DC 9V Antenna SCART cable Wireless channel selection switch gt Select from 4 available channels 17 Connector 18 Blaster light Your Wireless TV link 3 Getting started 3 1 Connect transmitter Two video sources can be connected at the same time to the SLV4200 transmitter The video sources can be following DVD players recorders VCR Game Consoles Cable amp Satellite Set Top Boxes and more l Connect video source to the transmitter A a Unplug the Scart cable that connects source to the TVI b Connect the transmitter to the source using the supplied SCART SCART cable C 2 Connect video source 2 to the transmitter A a Unplug the Scart cable that connects source 2 to the TVI b Take the supplied RCA SCART cable D Getting started 4 c Plug the RCA connectors into the corresponding ports of the transmitter A d Plug the SCART connector of the RCA SCART cable into the SCART port of the video source 2 Cry E9 Video source 2 Connect TVI a Plug the SCART cable from TVI into the SCART connector of source b Plug the SCART cable from TVI into the SCART connector of source 2 Connect the power adapter a Take the supplied power adapter E to plug the connector into the DC 9V power connector on the transmitter A Note if it is not the case press the ON OFF switch on the back of the product
13. to excessive heat caused by heating equipment or direct sunlight e Do not drop your wireless TV link or allow objects to fall on your wireless TV link Do not use any cleaning agents containing alcohol ammonia benzene or abrasives as these may harm the set Do not use the product in places where there are explosive hazards Do not let small metal objects come into contact with the product This can deteriorate audio quality and damage the product Active mobile phones in the vicinity may cause interference e Do not open your product as you could be exposed to high voltages Donotallow the charger to come into contact with liquids Do notallow the TV link to come into contact with liquids e Use only with provided power supply Manufacturer Concord Model Name CM 3AD09005 e Power supply information for receiver and transmitter Input AC100 240V 120mA 50Hz 60Hz Output DC9V 500mA About operating and storage temperatures e Operate in a place where temperature is always between 0 and 40 C 32 to 103 F Store in a place where temperature is always between 10 and 70 C 14 to ISTF 1 2 Conformity This product has been designed tested and manufactured according the European R amp TTE directive 1999 5 EC Following this directive this product can be brought into service in the following states CE 0682 R amp TTE Directive 1999 5 EC BE v DK v GR v ES wv FR v IE v IT v LU
14. uency 433 92MHz RF Output Power 7 9dBm IR carrier Frequency 30 57kHz IR Sensor Operation Range 2 7m Temperature range e Operation Between 0 and 40 C 32 to 103 F Storage Between 10 and 70 C 14 to 157 F Relative humidity e Operation Up to 90 at 40 C e Storage Up to 90 at 40 C 5 Frequently asked questions www philips com support In this chapter you will find the most frequently asked questions and answers about your product No image or wrong image on TVI Make sure the video source is switched on e Make sure the video source is connected to the transmitter A Make sure the transmitter A is connected to TVI e Make sure the transmitter A is switch on e Make sure SCART cables are firmly inserted e Make sure the correct SCART input on TVI is selected Noi image or wrong image on TV2 Make sure SCART cables are firmly inserted Make sure the receiver B is connected to TV2 Make sure both receiver B and transmitter A are switched on e Make sure the video source is switched on e Make sure the correct SCART input on TV2 is selected e If the video source gives proper image on TVI make sure the video source gives video signal in CVBS mode e Change the wireless channel that is used for communication See Remove interference on TV2 on page 12 The receiver B is out of range of the transmitter A The number of walls and ceilings between th
Download Pdf Manuals
Related Search