StarTech.com USB VGA KVM Console Extender over CAT5 UTP (500 ft)
Contents
1. StarTechsom Hard to find made easy Instruction Manual 13 Set Maximum Video Resolution By default the KVM switch is set to output an EDID signal with a maximum video resolu tion of 1024 x 768 to the host computer systems To be able to set a higher video resolu tion on the host computer systems use the following command with the 4 digit code for the maximum video resolution you wish to set NOTE Do not use the numeric keypad for entering the 4 Digit Code Only use the num ber keys along the top row of the keyboard Left lt CTRL gt Left lt CTRL gt V 4 digit code 4 Digit Code Resolution 4 Digit Code Resolution 1007 1024 x 768 1609 1600 x 900 1208 1280 x 800 1612 1600 x 1200 1210 1280 x 1024 1610 1680 x 1050 1307 1360 x 768 1910 1920 x 1080 1409 1440 x 900 1912 1920 x 1200 1410 1440 x 1050 NOTE You may need to reboot the host computer s for the new settings to take affect If not done automatically by the host computer s operating system you may then need to manually adjust the display settings to the new maximum resolution StarTechsom Hard to find made easy Instruction Manual 14 Specifications Maximum Resolution Maximum Range Network Cabling Type 1024 x 768 at maximum UTP cable length Actual maximum resolution varies by network cable length 500 feet 150 meters Straight through Unshielded Twisted Pair UTP Cat 5 Each Host and Remote Unit 2 x HD 15 female 1 x KVM 12. Toggles control of Computer Ctrl Ctrl T Ctrl Ctrl T A between Auto Local and Remote modes Ctrl Ctrl Esc Ctrl Ctrl Esc Cancels the hotkey sequence Enables 2 beeps or disables 1 beep Compatibility Mode so that the KVM extender will work with a KVM switch that also uses a Ctrl hotkey sequence Ctrl Ctrl Alt J E Ctrl Ctrl Alt E Local Mode Allows the user at Local Unit A exclusive Ctrl Ctrl 1 Ctrl Ctrl E 1 access to the system remote access from Remote Unit B Remote Unit B is disabled Remote Mode Allows the console at Remote Unit B Ctrl Ctrl 2 Ctrl Ctrl E 2 exclusive access to Computer A access to the computer from the Host Unit is disabled Auto Mode Wait for console Ctrl Ctrl 3 Ctrl Ctrl E 3 activity Sets the interval of inactivity in seconds that the Host Unit Ctrl Ctrl F3 Ctrl Ctrl E F3 will wait before returning to Auto Mode after a Unit has assumed control Adjusts the typematic rate for improved keyboard responsiveness PS 2 keyboard only Ctrl Ctrl F4 Ctrl Ctrl E F4 StarTechsom Hard to find made easy Instruction Manual 8 Standard Command pi n nas Description Privacy Setting A Local Unit in Local mode LED B Off LED A On 1 beep Reset to Factory Default 2 3 beeps Disable the Local Unit output vid
3. Using the Host Unit The Host Unit allows users connected to the Host and Remote units to share control of devices hosts computers KVM Switches connected to it The Host Unit has three modes that control which user may access the system at a given time Auto the KVM extender looks for keyboard or mouse activity from both A and B and automatically accepts input from the active console Local only the user seated at the Host unit can access the system and Remote only the user at the Remote station can access the system You can use either keyboard shortcuts if there is a keyboard and mouse attached or the mode switch on the top of the Host Unit to control which user has access to devices connected to the Host unit by pressing the button in sequence By default the Host Unit operates in Auto mode and switches to the next mode in the sequence each time the switch is pressed as follows Having a keyboard and mouse attached to the console ports on the Host Unit is recommended since it offers access to a number of extended features LED Indicators Mode A Indicator B Indicator _ Auto Auto senses activity Flashing Flashing i Local User at Local Unit has exclusive control On solid off Remote User at Remote Unit has exclusive control off On solid Instruction Manual 7 StarTech com Hard to find made easy Keyboard Shortcut Command Sequences With Compatibility Mode Enabled Deseando Standard Command
4. characters sec Note Commands described in the Key Key format are keys that must be pressed in order on the keyboard Commands described in the Key Key format must be pressed simultaneously Note If the Num Lock Caps Lock and Scroll Lock lights are flashing in unison on the keyboard the other Unit has control of Computer A You will not be able to use the computer or issue commands until the other unit has finished using the computer Note If the Extender is operating in Compatability Mode Ctrl Ctrl E hotkey sequence you must enter Ctrl Ctrl E E to access port E on the attached KVM switch StarTechsom Hard to find made easy Instruction Manual 10 Using the Remote Unit The Remote Unit allows a user at the Remote Unit to assume control of devices connected to the Host Unit if the Host Unit is set to Auto or Remote mode and it also permits the user seated at the Remote Unit to use any connected system as though the KVM Extender was transparent You can use either keyboard shortcuts or the mode switch on the top of the Host Unit to alternate control between A and B Unlike the Host Unit however the switch on top of the Remote unit only offers two selectable modes LED Indicators Mode A Indicator B Indicator Remote Access Computer A On solid Off Local Access Computer B Off On solid Keyboard Shortcut Command Sequences With Compatibility Mode Enabled Description Standard
5. Command Toggles console control Ctrl Ctrl T Ctrl Ctrl T between Computer A and Computer B Cancels the hotkey Ctrl Ctrl Esc Ctrl Ctrl Esc sequence Enables 2 beeps or disables 1 beep Compatibility Mode so Ctrl Ctrl Alt E Ctrl Ctrl Alt E that the KVM extender will work with a KVM switch that also uses a Ctrl hotkey sequence StarTechsom Hard to find made easy Instruction Manual 11 Standard Command Ctrl Ctrl 1 Ctrl Ctrl 2 Ctrl Ctrl F2 Ctrl Ctrl F4 Ctrl Ctrl F11 Ctrl Ctrl V 4 digit code Instruction Manual With Compatibility Mode Enabled Ctrl Ctrl E 1 Ctrl Ctrl E 2 Ctrl Ctrl E F2 Ctrl Ctrl E F4 Ctrl Ctrl E F11 Ctrl Ctrl V 4 digit code 12 Description Switches control to Computer B Switches control to Computer A input allowed only ifthe Host Unit is in Remote or Auto mode Toggles console control between Computer A and Computer B Adjusts the typematic rate for improved keyboard responsiveness PS 2 keyboard only Adjusts remote video quality based on the length of UTP cabling between the two computers available only when switched to Computer A Set maximum video resolution requires computer restart for both Remote Host units See page 13 f
6. Starlechsom Hard to find made easy VGA USB KVM Console Extender over CAT5 UTP 500 ft SV565UTPU SV565UTPUGB SV565UTPUEU DE Bedienungsanleitung de startech com FR Guide de l utilisateur fr startech com ES Gu a del usuario es startech com IT Guida per l uso it startech com NL Gebruiksaanwijzing nl startech com PT Guia do usu rio pt startech com For the most up to date information please visit www startech com Manual Revision 05 11 2012 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from t
7. ces mouse keyboard monitor will be located and place them appropriately 3 a If you are using surface cabling ensure you have enough Category 5 unshielded twisted pair UTP network cabling to connect the Host Unit to the Remote Unit s location and that each end is terminated with a RJ 45 connector OR b If you are using premises cabling ensure that the Category 5 unshielded twisted pair UTP network cabling between the Host Unit and the Remote Unit has been properly terminated in a wall outlet in each location and there is a patch cable long enough to connect the Remote Unit and the Host Unit to their respective outlets StarTechsom Hard to find made easy Instruction Manual 3 Remote Unit Local Unit Cat 5 Cable Computer B Control Direction Computer A Console Console Console ES optional Installing the Host Unit Place the Host Unit near the computer 2 Switch off the computer and disconnect any connected devices 3 Using the provided StarTech com integrated KVM cable see page 15 for alternative part numbers connect the end of the cable that has two USB or three PS 2 VGA connectors to the VGA Out connector and the USB or mouse and keyboard PS 2 connectors on the computer as appropriate The PS 2 version of the cable is color coded Connect the opposite end of the cable with a single connector to the gray coded connector marked COMPUTER on the Host Unit of the KVM extende
8. eo signal B Local Unit in Auto mode LED A amp B flashes alternately 1 beep Reset to Factory Default Ctrl Ctrl F6 Ctrl Ctrl E F6 2 beeps Upon keyboard mouse activation disables the Local Unit video output temporarily Set for 5 15 30 or 60 second interval 3 beeps Upon keyboard mouse activation the Remote Unit or Local Unit users can disable the output video signal temporarily The user can protect their privacy for 5 15 30 60 seconds Resets PS 2 mouse Ctrl Ctrl F12 Ctrl Ctrl E F12 synchronization Set the maximum video resolution requires Ctrl Ctrl V 4 Ctrl Ctrl V 4 computer restart for both digit code Remote and Host units digit code See page 13 for codes StarTechsom Instruction Manual 9 Hard to find made easy Beep Codes Some of the keyboard command sequences you issue to the Host Unit have multiple possible settings The unit will beep to indicate what setting you have selected for the command you issued A short beep followed by a long beep indicates an invalid command Ctrl Ctrl Alt E Compatibility Mode 1 beep disabled 2 beeps enabled Ctrl Ctrl F3 Inactivity Interval for Auto Mode 1 beep 5 seconds 2 beeps 15 seconds 3 beeps 30 seconds 4 beeps 60 seconds Ctrl Ctrl F4 Typematic Rate 1 beep 6 characters sec 2 beeps 12 characters sec 3 beeps 20 characters sec 4 beeps 30
9. hat to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Use of Trademarks Registered Trademarks and other Protected Names and Symbols This manual may make reference to trademarks registered trademarks and other protected names and or symbols of third party companies not related in any way to StarTech com Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech com or an endorsement of the product s to which this manual applies by the third party company in question Regardless of any direct acknowledgement elsewhere in the body of this document StarTech com hereby acknowledges that all trademarks registered trademarks service marks and other protected names and or symbols contained in this manual and related documents are the property of their respective holders StarTechsom Hard to find made easy Table of Contents Introduction Features System Requirements cc nas 1 Package COMEM dead ao 2 Connecting Your KVM Extender iia 3 Preparing YOUT Ri ns 3 nstalling the Host Unicas 4 nstallingithe Remote Unit aint 5 VIDEO COMPENSATION cr nn 6 Using MUNI a 7 Using the Rost UNT dote dead 7 Using tHE REMOTE Unica d 11 o ennei RERE RRR A RERIT RRES 15 Technical SUO 0 6g do 16 Warranty do cc ina 16 e Instruction Manual i StarTech Om Hard to find made easy Introduction Thank yo
10. or codes StarTechsom Hard to find made easy Beep Codes Some of the keyboard command sequences you issue to the Remote Unit have multiple possible settings The Unit will beep to indicate what setting you have selected for the command you issued A short beep followed by a long beep indicates an invalid command Ctrl Ctrl Alt E Compatibility Mode 1 beep disabled 2 beeps enabled Ctrl Ctrl F11 Remote Image Quality Adjustment 1 beep 0 130 feet 0 40 meters of UTP cable length 2 beeps 130 260 feet 40 80 meters of UTP cable length 3 beeps 260 390 feet 80 120 meters of UTP cable length 4 beeps 390 500 feet 120 150 meters of UTP cable length Ctrl Ctrl F4 Typematic Rate 1 beep 6 characters sec 2 beeps 12 characters sec 3 beeps 20 characters sec 4 beeps 30 characters sec Note Commands described in the Key Key format are keys that must be pressed in order on the keyboard Commands described in the Key Key format must be pressed simultaneously Note If the NumLock CapsLock and ScrollLock lights are flashing in unison on the keyboard the other Unit has control of Computer A You will not be able to use A until the other Unit releases access to that computer Note If the Extender is operating in Compatability Mode Ctrl Ctrl E hotkey sequence you must enter Ctrl Ctrl E E to access port E on the attached KVM switch
11. ote Units cannot exceed 500 feet 150 meters including patch cables if used Category 5e and 6 cabling is compatible with this product and may improve performance NOTE Long cable lengths between the Host and Remote Units may adversely affect image quality at high resolutions and refresh rates If you need to run your remote displays at high resolutions and frequencies use as little cabling between locations as possible and avoid practices such as coiling unused cable in a ceiling StarTechsom Hard to find made easy Instruction Manual 1 This product will also control a KVM switch allowing you to manage more than one computer remotely In this configuration you can connect the KVM extender s Host Unit to the console ports on the KVM You must use the provided power adapters if using this configuration You should set the Host Unit to Compatibility Mode before connecting it to a KVM that uses the Ctrl key as its hotkey sequence see page 8 for details Package Contents 1 x Host Unit 1 x Remote Unit 1 x Instruction Manual 2 x Power adapters 2 x 6 ft 2 in 1 USB VGA KVM cables 1 x Set of rubber mounting feet Instruction Manual StarTechsom Hard to find made easy Connecting Your KVM Extender Preparing Your Site Before you can install the the product you need to prepare your site 1 Determine where the host computer will be located and set up the computer 2 Determine where the console devi
12. r 4 Ifyou wish to have console access to the host computer connect a USB mouse keyboard and VGA monitor to the indicators marked as CONSOLE on the Host Unit 5 Connect the UTP cable connection for Remote Unit to the NETWORK RJ 45 connector on the Host Unit Connect the opposite end to a terminated wall outlet if you are using premises cabling StarTechsom Hard to find made easy Instruction Manual 4 Installing the Remote Unit ls 2 3 Place the Remote Unit near the computer Switch off the computer and disconnect any existing VGA and input connections Using a StarTech com integrated KVM cable see page 15 for part numbers connect the end of the cable that has two USB or three PS 2 connectors to the VGA Out connector and the USB or mouse and keyboard PS 2 connectors on the computer as appropriate The PS 2 version of the cable is color coded Connect the opposite end of the cable with a single connector to the gray coded connector marked COMPUTER on the Remote Unit of the KVM extender Connect a USB mouse keyboard and a VGA monitor to the indicators marked as CONSOLE on the Remote Unit Connect the UTP cable connection for Remote Unit to the NETWORK RJ 45 connector on the Remote Unit Connect the opposite end to a terminated wall outlet if using premises cabling CAUTION The UTP network cables that connect the Host and Remote Units carry electrical current and should not be plugged in to other de
13. r officers directors employees or agents for any damages whether direct or indirect special punitive incidental consequential or otherwise loss of profits loss of business or any pecuniary loss arising out of or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limitations or exclusions contained in this statement may not apply to you Hard to find made easy At StarTech com that isn t a slogan It s a promise StarTech com is your one stop source for every connectivity part you need From the latest technology to legacy products and all the parts that bridge the old and new we can help you find the parts that connect your solutions We make it easy to locate the parts and we quickly deliver them wherever they need to go Just talk to one of our tech advisors or visit our website You ll be connected to the products you need in no time Visit www startech com for complete information on all StarTech com products and to access exclusive resources and time saving tools StarTech com is an ISO 9001 Registered manufacturer of connectivity and technology parts StarTech com was founded in 1985 and has operations in the United States Canada the United Kingdom and Taiwan servicing a worldwide market StarTechsom Hard to find made easy Instruction Manual 16
14. u for purchasing a StarTech com KVM extender This product allows a computer to control a host system from a remote location at a distance of up to 500 feet 150 meters For ease of installation this product uses standard Category 5 5E or 6 network cabling that fits easily into almost any existing network infrastructure For added versatility the KVM extender supports either PS 2 or USB computer interfaces Console support is provided using standard USB and VGA connectors Features Can be used with a single computer or connected to an existing KVM switch Easy installation using industry standard UTP network cable Intuitive hotkey commands Supports auto switching between host and remote users or dedicated control USB computers are supported at the host and remote locations USB keyboard and mouse required for remote console System Requirements 1xintegrated KVM cable each for the host and remote computers Longer cables are available from StarTech com part numbers SVECONx PS 2 SVECONUSx USB Unshielded Category 5 5e 6 twisted pair UTP straight through network cable terminated at each end with RJ 45 connectors if using surface cabling OR Unshielded Category 5 5e 6 twisted pair UTP straight through network cable terminated at each end in a wall mounted outlet with a standard Category 5 5e 6 patch cable at both locations if using premises cabling NOTE The total length of cable between the Host and Rem
15. vices as they may cause damage We strongly recommend marking the cables you are using with this product at both locations for easy identification Instruction Manual 5 StarTechsom Hard to find made easy Video Compensation Video Compensation allows the user to adjust the equalization on the Remote Unit to optimize video performance based on the length of cable being used as well as other factors that may affect There are five segments of various lengths of CAT 5 cables from which to chose to achieve the best visibility please refer to the section titled Keyboard Shortcut Command Sequences to adjust the video compensation A Files Stored on This Computer System Tasks View system Y T ew avatar B Shared Documents 5 Add or remove programs n De Change a setting a Samuels Documents Other Places Hard Disk Drives S My Network Places E My Documents Sy aok E Shared Documents D gt Control Panel Before Video Compensation QA vemo Details My Computer System Folder After Video Compensation First note the length of CAT 5 cable you used Then use the hotkeys to adjust the video compensation accordingly You can use the hotkey sequence as outlined in the section titled Keyboard Shortcut Command Sequences Instruction Manual 6 StarTech com Hard to find made easy Using the KVM Extender This section details how to use your KVM extender at both the host and remote locations
16. x console VGA Connectors 1 x RJ 45 2 x USB keyboard mouse for console 1 x Power optional 9V DC 600mA center positive per Unit Power Adapter Optional only required when connected using a conventional KVM switch RJ 45 Connector Pinout pin Wire Pair Function Color Pair 3 1 White 2 T Orange Pair 2 Pair 1 Pair 4 2 Orange 2 R gt gt gt 3 White 3 T Green 4 Blue 1 R 5 White 1 T Blue 6 Green 3 R 7 White 4 7 Brown 8 Brown 4 R Instruction Manual StarTechsom Hard to find made easy 15 Technical Support StarTech comss lifetime technical support is an integral part of our commit ment to provide industry leading solutions If you ever need help with your product visit www startech com support and access our comprehensive selection of online tools documentation and downloads Warranty Information This product is backed by a two year warranty In addition StarTech com warrants its products against defects in materials and workmanship for the periods noted following the initial date of purchase During this period the products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not warrant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or thei
Download Pdf Manuals
Related Search