TEAC TM-ST1 microphone
Contents
1. Power LED flashes oncethen goes off to extend battery life When the light no longer turns on you need to change the battery The AA battery generally provides approximately 200 hours of use under normal circumstances This can vary from user touser Precautions 1 Insert the battery correctly 2 Do not charge the battery 3 Remove the battery if the microphone will not be used for a long period of time 4 If the battery leaks clean the battery holder before inserting anew battery Connection Switch off the microphone and insert the 3 5mm stereo plug into the microphone input ofyour recording device a oo lo o D VU UVY Accessories The TM ST1 includes a microphone clip and tabletop stand To use the clip with a microphone stand the mic clip comes with 3 8 and 5 8 adapter screws A windscreen is also provided to reduce breath or wind noise2. TASCAM C gt TM ST1 STERE o a TASCAM 0 Description The TASCAM TM ST1 is configured with an M S stereo pattern for excellent POWER imaging and naturalambience The microphone pattern can be switched to 90 for narrower coverage suchas a solo instrument or voice or 120 for orchestra choir orstage performance The TM ST1 is suitable for digital recordings of concerts meetings and events Features e M S stereo space for natural and clear stereo soud image e Coverage canbe switched between 90 and 120 e 3 5mm stereo plug e Light weight body with professional clip convenient for carrying and set up Specifications Type Single point stereo Mid Side arrangement electret condenser microphones Cardioid for Mid and figure of 8 for Side Coverage at90 or 120 100 15 000Hz 45dBV Pa 120 setting Channel difference within 3dB Ik ohm 20 at 1kHz Polar pattern Frequency response Sensitivity Nominal Impedance Min load impedance 2k ohm Max SPL 110dB Dynamic range 85dB Power Source 1 5V Battery AA Power consumption 4mA Battery lifetime approx 200 hours Output connector 3 5mm stereo plug Weight 110g including battery Inserting Battery Steps 1 Unscrew the microphone rear cover 2 Remove the body shell to expose the battery holder 3 Insert the battery according to the polarity markings Power Switch When powering on the microphone the
Download Pdf Manuals
Related Search