Lenmar R2G802U, Charger Charger with 4 R2G 2150mAh cells, AA/AAA, USB output
Contents
1. Once charge is complete remove batteries and unplug the charger as soon as it is practical Do not leave batteries in charger for extended periods of time more than 1 2 days or when the charger is not plugged in Unplug the charger when not in use 4 Begin again at Step 1 to charge the next set of batteries Bad Cell Detection When charge process is started the charger detects the health status of each of the cells in the battery compartment If any batteries are unsuitable for charging i e short circuit or reversed polarity the word BAD will indicate on the LCD screen and battery icon will flash USB Charge Port Operation When using the USB PowerPort on this charger the AA AAA charger function has priority The USB PowerPort will not be available while batteries are installed and charging Once the AA AAA batteries have completed their charge the USB port will be turned on automatically The USB symbol will be shown on the LCD screen to indicate the USB socket is ready for use Note Make sure the maximum loading is not exceeding 500mA for the USB socket Do not attempt to overload the USB port or damage to the charger or USB device may result Clock Alarm Day Date operation The following shows which buttons on the setting panel you need to press to navigate between modes The 2 feet on the bottom rear of the chassis act as switches to activate the blue backlight on the LCD display In any mode just to hit the t2. Setting the Alarm In the regular Time mode press the button to enter the Alarm mode The ALARM icon will appear on the LCD in this mode Pressing the button will start the Alarm icon flashing along with the item to be set Use the and buttons to change the item to the setting you want When you are done setting each item press the button to move to the next item You can set the hour and minute you want the alarm to sound the length of time delay for the Snooze setting and select the alarm tone to sound The following figure shows the order of items during the Alarm setting process The SNOOZE can be set in the range of 1 to 60 minutes and there are 8 different kinds of alarm tones for your choice Press and to change the setting you want Pressing the button will exit the setting mode set mode will automatically if there is no input for 1 minute The following figure shows the order of items during the Alarm setting process Turning on off Alarm and Snooze Mode From the regular Time mode press the button to enter the Alarm mode Once in the Alarm Mode use the button to cycle through the 3 Alarm modes shown below depending on the alarm function wanted When an alarm is turned on the alarm tone sounds for about 1 minute when the alarm time is reached If SNOOZE mode is turned on the alarm tone will sounds 2 times for about 1 minute when the snooze is reached You can stop the alarm sound by pressing the button Alarm
3. clock portion of the LCD display will turn on and you will hear alarm music for 10 seconds The Clock Alarm is now ready for use and should be set to the proper time date If the LCD display get dim or the sound of the alarm tone become weak replace the clock battery with another new CR 2025 type 3V Lithium battery which is located on the bottom side of the charger base Caution Batteries are partially charged as shipped Must be charged prior to first use for full capacity Charge only NiMH type batteries on this charger Do Not mix AA and AAA or different capacity batteries together when charging Use only R2G NoMEM PRO or other proper NiMH compatible charger to recharge the batteries included Batteries may leak or explode causing personal injury if inserted improperly disposed of in fire mixed with other battery types or short circuited LCD Display Legend Getting Ready Choose the adapter plate for the type of battery you will be charging Each of the adapter plates is labeled as to the batteries it can work with If the charger base does not already have the adapter plate you want attached you will need to remove the adapter plate first by pushing down on the plate and sliding it to the rear of the charger base away from the LED indicators Then attach the selected adapter plate to the charger unit by aligning the arrows on the sides of the adapter plates and the charger base as shown While
4. max time overcharge protection bad cell reverse polarity shorted cell detection B B A C C D B B B B B A A A A C C D C D D When using AC or Car adapter 12VDC input When using USB power adapter 5VDC input Setting the Alarm In the regular Time mode press the button to enter the Alarm mode The ALARM icon will appear on the LCD in this mode Pressing the button will start the Alarm icon flashing along with the item to be set Use the and buttons to change the item to the setting you want When you are done setting each item press the button to move to the next item You can set the hour and minute you want the alarm to sound the length of time delay for the Snooze setting and select the alarm tone to sound The following figure shows the order of items during the Alarm setting process The SNOOZE can be set in the range of 1 to 60 minutes and there are 8 different kinds of alarm tones for your choice Press and to change the setting you want Pressing the button will exit the setting mode set mode will automatically if there is no input for 1 minute The following figure shows the order of items during the Alarm setting process Turning on off Alarm and Snooze Mode From the regular Time mode press the button to enter the Alarm mode Once in the Alarm Mode use the button to cycle through the 3 Alarm modes shown below depending on the alar
5. mode The alarm will sound for about 1 minute While the alarm is sounding it can be silenced by pressing the button Alarm Snooze mode the alarm will sound for about 1 minute If the alarm is not silenced early by pressing the button or if the button is pressed while the alarm is sounding the alarm goes into Snooze mode and will sound again after the time entered in the Snooze setting has elapsed Thermometer This charger uses a temperature senor to measure temperature Temperature is displayed in units of 0 1 C or 0 1 F and displayed in the range from 0 C to 50 C 32 F to 99 F In the regular Time mode you can toggle between C or F by pressing the button Limited 3 Year Warranty This limited warranty starts from the date of original purchase and expires three years thereafter If during this period any part because of manufacturing defects or workman ship fails to function properly under normal use it will be repaired at no charge for parts and labor or at our option the product will be replaced The following is excluded damages from delay or loss of use of equipment or damaged batteries malfunctions resulting from misuse tampering unauthorized repairs modifications or accident Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to LENMAR ENTERPRISES INC 4035 Via Pescador USA Camarillo CA 93012 When sending in prod
6. B device may result Clock Alarm Day Date operation The following shows which buttons on the setting panel you need to press to navigate between modes The 2 feet on the bottom rear of the chassis act as switches to activate the blue backlight on the LCD display In any mode just to hit the top of the unit lightly and the black light will light on for about 10 seconds The backlight will only operate while the unit is plugged into power using any of the supplied power adapters In the regular Time mode press the button once and the Time icon will starts to flash on the LCD screen along with the item to be changed which indicates Time Setting mode Use and buttons to change the value of the flashing item Once the flashing item is set to what you want press to select the next setting and change as listed above The Year can be set in the range of 2000 to 2099 The day of the week is calculated automatically according with the date you set Once all the items are set press the button to exit the setting mode set mode will automatically if there is no input for 1 minute The following figure shows the order of items during the setting process 12 24 Hour Mode In the regular Time mode pressing the button will toggle between 12 hour and 24 hour mode 1 2 3 Fig 1 Fig 2 Fig 3 Setting the Time and Date Charge Times Size Type AA AAA Charging Current 1200mA for charging 1 2 pcs batteries or 800
7. DC ea cell 600mA AA AAA size 1 2 pcs 1 4VDC ea cell 560mA AA AAA size 3 4 pcs 1 4VDC ea cell 280mA AA 50mA AAA 25mA 100 240V AC 50 60 Hz International Compatible 12VDC output Car Cord adapter 12VDC output USB cord adapter 5VDC output 5VDC 500mA max deltaV max time overcharge protection bad cell reverse polarity shorted cell detection B B A C C D B B B B B A A A A C C D C D D When using AC or Car adapter 12VDC input When using USB power adapter 5VDC input
8. car cord for using the charger in the car and a USB cable for powering the charger from your computer are also included Before Use To activate the clock and thermometer functions pull out the tab from the side of the casing at the access cover to the clock battery on the bottom of the unit The clock portion of the LCD display will turn on and you will hear alarm music for 10 seconds The Clock Alarm is now ready for use and should be set to the proper time date If the LCD display get dim or the sound of the alarm tone become weak replace the clock battery with another new CR 2025 type 3V Lithium battery which is located on the bottom side of the charger base Caution Batteries are partially charged as shipped Must be charged prior to first use for full capacity Charge only NiMH type batteries on this charger Do Not mix AA and AAA or different capacity batteries together when charging Use only R2G NoMEM PRO or other proper NiMH compatible charger to recharge the batteries included Batteries may leak or explode causing personal injury if inserted improperly disposed of in fire mixed with other battery types or short circuited LCD Display Legend Getting Ready Choose the adapter plate for the type of battery you will be charging Each of the adapter plates is labeled as to the batteries it can work with If the charger base does not already have the adapter plate you want attached you will ne
9. charging and the word Charge will be shown to the left of the battery symbols that indicate each battery s charge progress After the batteries are fully charged the wording FULL will indicate on the LCD screen to indicate the trickle charge and the charged batteries are ready for use Once charge is complete remove batteries and unplug the charger as soon as it is practical Do not leave batteries in charger for extended periods of time more than 1 2 days or when the charger is not plugged in Unplug the charger when not in use 4 Begin again at Step 1 to charge the next set of batteries Bad Cell Detection When charge process is started the charger detects the health status of each of the cells in the battery compartment If any batteries are unsuitable for charging i e short circuit or reversed polarity the word BAD will indicate on the LCD screen and battery icon will flash USB Charge Port Operation When using the USB PowerPort on this charger the AA AAA charger function has priority The USB PowerPort will not be available while batteries are installed and charging Once the AA AAA batteries have completed their charge the USB port will be turned on automatically The USB symbol will be shown on the LCD screen to indicate the USB socket is ready for use Note Make sure the maximum loading is not exceeding 500mA for the USB socket Do not attempt to overload the USB port or damage to the charger or US
10. ed to remove the adapter plate first by pushing down on the plate and sliding it to the rear of the charger base away from the LED indicators Then attach the selected adapter plate to the charger unit by aligning the arrows on the sides of the adapter plates and the charger base as shown While pressing down lightly on the adapter plate slide the plate toward the front of the charger base until it locks Charging Instructions 1 Choose the source of power for the charger unit You can use the AC adapter which is international capable accepting 100 240VAC plug adapter may be required in other countries not included the DC car cord while on the move or plugged into a USB port on your computer charge times are increased when USB power is used Simply plug the desired power cable into the side of the charger unit and the other end into the appropriate power source 2 Insert 1 to 4 pieces of AA or AAA rechargeable Ni MH batteries into any open battery location observing the proper battery polarity to the marks in the battery compartment Do not mix AA and AAA batteries while charging The Blue backlight will light up for around 10 sec once the batteries inserted correctly For charging AAA batteries pull down the adjustable battery contact plate before inserting the AAA batteries into the compartment The charger automatically adjusts the charging current depending on the size of the battery being charged 3 The LCD will indicate the proper
11. ger Incorrect reassembly may result in a risk of electric shock or fire Unplug the charger from outlet before attempting any maintenance or cleaning This AC power unit supplied is intended to be used in a vertical or floor mount position only 4 5 6 R2G802U PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT Introduction Thank you for purchasing the R2G802 2 Hour Charger Read the instruction manual thoroughly before use and keep the manual for later reference It contains important operating instructions for your R2G Rechargeable Battery System The R2G802 is a combination of Travel Alarm Clock 2 hour microprocessor controlled charger for 1 to 4 AA AAA NiMH batteries Thermometer and USB PowerPort for charging your cell phones MP3 players or any other device that accepts power from a USB port All the functions are displayed clearly on a large backlit LCD Display The charger can be powered 3 ways and includes a high efficiency switching type power supply will adjust automatically to any voltage from 100 240VAC for international use A car cord for using the charger in the car and a USB cable for powering the charger from your computer are also included Before Use To activate the clock and thermometer functions pull out the tab from the side of the casing at the access cover to the clock battery on the bottom of the unit The
12. m function wanted When an alarm is turned on the alarm tone sounds for about 1 minute when the alarm time is reached If SNOOZE mode is turned on the alarm tone will sounds 2 times for about 1 minute when the snooze is reached You can stop the alarm sound by pressing the button Alarm mode The alarm will sound for about 1 minute While the alarm is sounding it can be silenced by pressing the button Alarm Snooze mode the alarm will sound for about 1 minute If the alarm is not silenced early by pressing the button or if the button is pressed while the alarm is sounding the alarm goes into Snooze mode and will sound again after the time entered in the Snooze setting has elapsed Thermometer This charger uses a temperature senor to measure temperature Temperature is displayed in units of 0 1 C or 0 1 F and displayed in the range from 0 C to 50 C 32 F to 99 F In the regular Time mode you can toggle between C or F by pressing the button Limited 3 Year Warranty This limited warranty starts from the date of original purchase and expires three years thereafter If during this period any part because of manufacturing defects or workman ship fails to function properly under normal use it will be repaired at no charge for parts and labor or at our option the product will be replaced The following is excluded damages from delay or loss of use of equipment or damaged batteries malfunctions resulting from misu
13. mA for charging 3 4 pcs batteries 600mA Charging time For 1 2 pcs 90 minutes 100 minutes 110 minutes 120 minutes 130 minutes 140 minutes 70 minutes 80 minutes 90 minutes 100 minutes 110 minutes 120 minutes NiMH 1800mAh 2000mAh 2200mAh 2400mAh 2600mAh 2800mAh 700mAh 800mAh 900mAh 1000mAh 1100mAh 1200mAh Charging time For 3 4 pcs 135 minutes 150 minutes 165 minutes 180 minutes 195 minutes 210 minutes Charge time will vary depending upon the brand capacity and condition of batteries being charged Size Type AA AAA Charging Current 560mA for charging 1 2 pcs batteries or 280mA for charging 3 4 pcs batteries 600mA Charging time For 1 2 pcs 180 minutes 200 minutes 220 minutes 240 minutes 260 minutes 280 minutes 70 minutes 80 minutes 90 minutes 100 minutes 110 minutes 120 minutes NiMH 1800mAh 2000mAh 2200mAh 2400mAh 2600mAh 2800mAh 700mAh 800mAh 900mAh 1000mAh 1100mAh 1200mAh Charging time For 3 4 pcs 270 minutes 300 minutes 330 minutes 360 minutes 390 minutes 420 minutes 140 minutes 160 minutes 180 minutes 200 minutes 220 minutes 240 minutes Charger Input Charge rate AC or Car adapter 12VDC input Charge rate USB power adapter 5VDC input Trickle mode Power Supply USB Output Safety Features 12VDC 600mA AA size 1 2 pcs 1 4VDC ea cell 1200mA AA size 3 4 pcs 1 4VDC ea cell 800mA AAA size 1 4 pcs 1 4V
14. mAh 900mAh 1000mAh 1100mAh 1200mAh Charging time For 3 4 pcs 135 minutes 150 minutes 165 minutes 180 minutes 195 minutes 210 minutes Charge time will vary depending upon the brand capacity and condition of batteries being charged Size Type AA AAA Charging Current 560mA for charging 1 2 pcs batteries or 280mA for charging 3 4 pcs batteries 600mA Charging time For 1 2 pcs 180 minutes 200 minutes 220 minutes 240 minutes 260 minutes 280 minutes 70 minutes 80 minutes 90 minutes 100 minutes 110 minutes 120 minutes NiMH 1800mAh 2000mAh 2200mAh 2400mAh 2600mAh 2800mAh 700mAh 800mAh 900mAh 1000mAh 1100mAh 1200mAh Charging time For 3 4 pcs 270 minutes 300 minutes 330 minutes 360 minutes 390 minutes 420 minutes 140 minutes 160 minutes 180 minutes 200 minutes 220 minutes 240 minutes Charger Input Charge rate AC or Car adapter 12VDC input Charge rate USB power adapter 5VDC input Trickle mode Power Supply USB Output Safety Features 12VDC 600mA AA size 1 2 pcs 1 4VDC ea cell 1200mA AA size 3 4 pcs 1 4VDC ea cell 800mA AAA size 1 4 pcs 1 4VDC ea cell 600mA AA AAA size 1 2 pcs 1 4VDC ea cell 560mA AA AAA size 3 4 pcs 1 4VDC ea cell 280mA AA 50mA AAA 25mA 100 240V AC 50 60 Hz International Compatible 12VDC output Car Cord adapter 12VDC output USB cord adapter 5VDC output 5VDC 500mA max deltaV
15. op of the unit lightly and the black light will light on for about 10 seconds The backlight will only operate while the unit is plugged into power using any of the supplied power adapters In the regular Time mode press the button once and the Time icon will starts to flash on the LCD screen along with the item to be changed which indicates Time Setting mode Use and buttons to change the value of the flashing item Once the flashing item is set to what you want press to select the next setting and change as listed above The Year can be set in the range of 2000 to 2099 The day of the week is calculated automatically according with the date you set Once all the items are set press the button to exit the setting mode set mode will automatically if there is no input for 1 minute The following figure shows the order of items during the setting process 12 24 Hour Mode In the regular Time mode pressing the button will toggle between 12 hour and 24 hour mode 1 2 3 Fig 1 Fig 2 Fig 3 Setting the Time and Date Charge Times Size Type AA AAA Charging Current 1200mA for charging 1 2 pcs batteries or 800mA for charging 3 4 pcs batteries 600mA Charging time For 1 2 pcs 90 minutes 100 minutes 110 minutes 120 minutes 130 minutes 140 minutes 70 minutes 80 minutes 90 minutes 100 minutes 110 minutes 120 minutes NiMH 1800mAh 2000mAh 2200mAh 2400mAh 2600mAh 2800mAh 700mAh 800
16. ot in use Never use any cable or power adapter not recommended by manufacturer Otherwise risk of fire electric shock or injury to persons may result Do not operate the charger if it has been subjected to shock or damage Take it to a qualified serviceman for repair Do not disassemble the charger Incorrect reassembly may result in a risk of electric shock or fire Unplug the charger from outlet before attempting any maintenance or cleaning This AC power unit supplied is intended to be used in a vertical or floor mount position only 4 5 6 R2G802U PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT Introduction Thank you for purchasing the R2G802 2 Hour Charger Read the instruction manual thoroughly before use and keep the manual for later reference It contains important operating instructions for your R2G Rechargeable Battery System The R2G802 is a combination of Travel Alarm Clock 2 hour microprocessor controlled charger for 1 to 4 AA AAA NiMH batteries Thermometer and USB PowerPort for charging your cell phones MP3 players or any other device that accepts power from a USB port All the functions are displayed clearly on a large backlit LCD Display The charger can be powered 3 ways and includes a high efficiency switching type power supply will adjust automatically to any voltage from 100 240VAC for international use A
17. pressing down lightly on the adapter plate slide the plate toward the front of the charger base until it locks Charging Instructions 1 Choose the source of power for the charger unit You can use the AC adapter which is international capable accepting 100 240VAC plug adapter may be required in other countries not included the DC car cord while on the move or plugged into a USB port on your computer charge times are increased when USB power is used Simply plug the desired power cable into the side of the charger unit and the other end into the appropriate power source 2 Insert 1 to 4 pieces of AA or AAA rechargeable Ni MH batteries into any open battery location observing the proper battery polarity to the marks in the battery compartment Do not mix AA and AAA batteries while charging The Blue backlight will light up for around 10 sec once the batteries inserted correctly For charging AAA batteries pull down the adjustable battery contact plate before inserting the AAA batteries into the compartment The charger automatically adjusts the charging current depending on the size of the battery being charged 3 The LCD will indicate the proper charging and the word Charge will be shown to the left of the battery symbols that indicate each battery s charge progress After the batteries are fully charged the wording FULL will indicate on the LCD screen to indicate the trickle charge and the charged batteries are ready for use
18. se tampering unauthorized repairs modifications or accident Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to LENMAR ENTERPRISES INC 4035 Via Pescador USA Camarillo CA 93012 When sending in product for service your package should include evidence of date and place of purchase Enclose 10 00 for shipping and handling for addresses in the U S and 15 00 in Canada For outside the U S and Canada freight will vary depending upon ship to address Proposition 65 Notice California The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers WARNING Handling the cord on this product will expose you to lead a chemical known to the state of California to cause birth defects or other reproductive harm Wash hands after handling For additional questions comments or to explore other Lenmar battery solutions visit our web site at www poweredbylenmar com or call 800 424 2703 Warning Before charging read instructions This charger is intended for use with Nickel metal hydride rechargeable batteries only Attempting to charge other types of batteries may cause personal injury and damage to the charger Do not expose charger to rain or moisture For indoor use only Disconnect from power when n
19. uct for service your package should include evidence of date and place of purchase Enclose 10 00 for shipping and handling for addresses in the U S and 15 00 in Canada For outside the U S and Canada freight will vary depending upon ship to address Proposition 65 Notice California The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers WARNING Handling the cord on this product will expose you to lead a chemical known to the state of California to cause birth defects or other reproductive harm Wash hands after handling For additional questions comments or to explore other Lenmar battery solutions visit our web site at www poweredbylenmar com or call 800 424 2703 Warning Before charging read instructions This charger is intended for use with Nickel metal hydride rechargeable batteries only Attempting to charge other types of batteries may cause personal injury and damage to the charger Do not expose charger to rain or moisture For indoor use only Disconnect from power when not in use Never use any cable or power adapter not recommended by manufacturer Otherwise risk of fire electric shock or injury to persons may result Do not operate the charger if it has been subjected to shock or damage Take it to a qualified serviceman for repair Do not disassemble the char
Download Pdf Manuals
Related Search