Home

Samsung 400CXN

Contents

1. Audio Format ENTER Digital Text Enable Time Zone Common Interface F Move r gt ENTER You can only hear Dolby Digital sound through the audio receiver connected through an optical cable You can only hear PCM sound through the main speaker When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the internal mute function 1 PCM 2 Dolby Digital Note e The Audio Format appears according to the broadcasting signal e Dolby digital sound is only available when the TV is connected with an external speaker using an optical cable Audio Description D MENU r r Digital Menu ENTER Setup ENTER or gt gt gt ror Audio Description ENTER i T Volume r gt ENTER Note e Audio Description is active when Audio Format is set to PCM This is an auxiliary audio function that provides an additional audio track for visually challenged persons this function handles the Audio Stream for the AD Audio Description when it is sent along with the Main audio from the broadcaster Users can turn the Audio Description On or Off and control the volume Adjusting the LCD Display 1 Audio Description Off On 2 Volume Note e Volume is active when Audio Description is se
2. F a1 ENTER You can store television channels including those received via cable networks When storing channels manually you can choose Whether or not to store each of the channels found The Programme number of each stored channel which you wish to identify C Air channel mode You can select a channel by entering the assigned number to each air broad casting station in this mode Adjusting the LCD Display S Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode Search D MENU Channel ENTER ENTER Manual Store T TF OF oF ENTER Search Manual Store Programme Colour System Sound System Channel Store T gt ENTER The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen Store D MENU Channel ENTER ENTER Manual Store 5 OF gt T ENTER Store Manual Store Programme P 1 Colour System Auto Sound System BG Channel tee Search 83 MHz Store OK ENTER It s used to restore the number user inputs Channel Manager Channel List D MENU r Channel ENTER 57 r r ENTER Channel Manager ENTER Channel List Channel List Cc 4 Od h ar k I I I m kh I I Ei Fr a i iy 9 i
3. e Do not use chemicals such as wax benzene alcohol thinner mos quito repellant lubricant or cleaner These may change the appear ance of the product surface and peel off the indication labels on the product L Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is any foreign material on the cloth make sure to shake it thoroughly before using it L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunction L The product is a high voltage product Ensure that users do not disas semble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and contact a Service Center e Otherwise this may result in electric shock or fire L Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire Safety Instructions T J and disconnect the power cord Contact a Service Center f CD Yi Hi e Othe
4. Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual How can I clean the outer case LCD Panel Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display How can I play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible What are the benefits of digital broadcasting Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does As services develop you can also enjoy various information services because various kinds of data besides video and audio can be sent For example while watching a sports game you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a specific scene In addition you can retrive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV Digital TV broadcasting allows you to easily access vario
5. ENTER Setup 0 0 3 T T ENTER Safety Screen gt ENTER Pixel Shift y ENTER Horizontal Dot a gt ENTER Sets how many pixels the screen moves horizontally Five adjustment levels 0 1 2 3 and 4 Vertical Line MENU or or ENTER Setup 0 T T ENTER Safety Screen ENTER Pixel Shift gt ENTER Vertical Line gt ENTER Sets how many pixels the screen moves vertically Five adjustment levels 0 1 2 3 and 4 Time MENU or or ENTER Setup 0 T T ENTER Safety Screen ENTER Pixel Shift 1 51 57 ENTER Time gt ENTER le min Set the time interval for performing the horizontal or vertical movement respectively Timer Timer Mode Period Adjusting the LCD Display MENU or or ENTER Setup 0 3 T T ENTER Safety Screen gt gt ENTER Timer ENTER Timer a gt ENTER You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish 1 Off 2 On MENU or or ENTER Setup 0 T T ENTER
6. No Information a Today Er arr aaa 25 Closedown 26 Hard Sall Extreme Machines Ar Time Team 28 Programmes resume at 06 00 32 The Bugs The Grim The Cramp Dexter s L Closedown hul Displays the programme information as time ordered One hour segments Two hours of programme information is displayed which may be scrolled forwards or backwards in time Note e You can also display the guide menu simply by pressing the GUIDE button e The programme title is on the upper part of the screen center Please click on INFO button for the detailed information Channel Number Running Time Status Bar Parental Level Video Quality Information HD SD Sound Modes Subtitle or Teletext Languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information will be appeared if the summary Is long e Six channels are displayed To scroll between channels move to a channel using the a or Y button To display page by page use the channel button Adjusting the LCD Display Scheduled List D MENU rF Digital Menu ENTER Guide ENTER ENTER 5 Scheduled List No programmes Add Programme 3 Return If you make a scheduled viewing list of programs you may like to see the channel will be automatically switched to the scheduled Programme at the scheduled time even if you are watching another program Tuesday 22 Apr 15 30
7. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or con sequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Win dows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are reg istered trademarks of the U S Environmental Protection Agency EPA All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners Appendix SRS TruSurround XT SRS and Symbol are trademarks of SRS Labs Inc TruSurround XT technology is incorporated under license from SRS Labs Inc
8. Safety Screen gt ENTER Timer Y gt ENTER Mode a gt ENTER You can change the Safety Screen Type 1 Scroll 2 Bar 3 Eraser MENU or or ENTER Setup 0 T ENTER Safety Screen gt gt ENTER Timer ENTER Period gt ENTER Time Scroll Bar Adjusting the LCD Display Use this function to set the execution period for each mode set in the timer MENU or or ENTER Setup 0 T T ENTER Safety Screen gt gt ENTER Timer 5 gt ENTER Time gt ENTER Within the set period of time specify a time for execution e Mode Scroll 1 5 sec e Mode Bar Eraser 10 50 sec MENU or or ENTER Setup 0 T T ENTER Safety Screen gt T ENTER Scroll fl Timer r ES ney j This function prevents after images on the screen by moving all the pixels on the PDP according to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time MENU or or ENTER Setup 0 ro ENTER Safety Screen gt gt gt ENTER Bar This function prevents a
9. or ENTER e Software Information Software Information Curent Software T PERLDEUC 1008 Default Info e Manual Upgrade No software to upgrade now OF e Standby Mode upgrade Software Upgrade Software Information Manual Upgrade 4 Reset D MENU r r r Digital Menu ENTER r Setup gt ENTER or T T T T T T gt T System ENTER or or of ENTER 0 U 9 DTY Reset WARNING All channel settings and user preferences wall be lost and returned to the factory defaults lt is recommended that a reset 15 performed only when serious problems are experlenced You can reset the values stored to the factory default values The Reset operation deletes all channel information and user preferences returning all values to their default factory state Note e The warning message is displayed All values will be reset by pressing the coloured buttons red green yellow and blue in turn Language Audio Language D MENU r r r Digital Menu gt ENTER v Language gt ENTER ENTER Audio Language ENTER Adjusting the LCD Display Language Audio Language Subtitle Language Teletext Language Preference w Return You can change the default value for subtitle audio teletext languages Displays the language infor mation for the incoming stream Note e En
10. Introduction LCD Display Head NETWORK MODEL SIZE SBB OPTION MOUNT HOLE MAX L8 0 L10 0 MACHINE SCREW 4EA oe gh 2545 3395 2920 COVER HDD NETWORK MODEL ONLY MOUNT HOLD MAX L8 0 10 0 MACHINE SCREW 2EA OPTION TUNER MAX LBO 10 0 MACHINE SCREW 2EA 191 0 1365 3395 bo 3396 Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation professionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Introduction Dimensions 600 X 400 WALL MOUNT HOLE MAX L8 0 12 0 MACHINE SCREW 4EA SAMSUNG G For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product
11. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property damage Make sure to read the instructions carefully and use the product in the correct manner o Warning Caution _ Failure to follow directions noted by this symbol could result in bodily harm A N or damage to the equipment O Notational Conventions Q Prohibited Q Do not disassemble Q Do not touch Important to read and under stand at all times Disconnect the plug from the outlet Ground to prevent an electric shock N When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L Do not use a damaged power cord or plug or a damaged or loose power outlet e Otherwise this may result in electric shock or fire L Do not touch the power plug with wet hands when removing or plug X a h ging the plug into the outlet Gin Gb 17 e Otherwise this may result in electric shock L Make sure to connect the power cord to a grounded power outlet gt pa e Otherwise it may result in electric shock or personal injury F L Ensure that the power plug is plugged into the power outlet firmly and ft correctly Rd od e Otherwise this may result in fire Safety Instruc
12. precision of Ippm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 3 133 440 6 220 800 When cleaning the LCD Display and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it D If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function When viewing a fixed screen for an extended period of time a residual image or blur g p g riness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the LCD Display for an extended period of time PRODUCT INFORMATION Image Retention Free Ga What is Image Retention Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern ove
13. 16 00 801 RalTre Add Programme dit Delete Move s5 Return You can also set hour and minute by pressing the number buttons on the remote control l pA Channel Set the channel Time Set the time Date Set Year Month and Day Frequency Set the frequency Once Daily or Weekly Scheduled List channe Time Date Frequency Save Cancel Adjust db Move Return Save Save the adjusted schedule Cancel Cancel the adjusted schedule Add Programme Add a new schedule Edit Re adjust the selected schedule Adjusting the LCD Display 5 Delete Delete the selected schedule Default Guide D MENU r r r Digital Menu gt ENTER Guide ENTER ENTER Default Guide Now amp Next Guide Full Guide Scheduled List ENTER You can preset the default guide style I Now Next 2 Full Guide Digital Channel Country D MENU r r Digital Menu ENTER Digital Channel gt ENTER Coun try gt ENTER Channel Switzerland Auto Store Others Manual Store Edit Favourite Channels Channel List Move r gt ENTER Select the country in which the product is being used before you use the Auto Store feature If you do not see your country in the list select Others Auto Store D MENU r r r Digital Menu ENTER Y Digital Channel gt ENTER Auto Sto
14. BELGIUM CZECH REPUBLIC DENMARK EIRE FINLAND FRANCE North America 1 800 SAMSUNG 726 7864 1 800 SAMSUNG 726 7864 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 0800 SAMSUNG 726 7864 0032 0 2 201 24 18 844 000 844 Distributor pro eskou republiku http www samsung com http www samsung com ca http www samsung com http www samsung com ar http www samsung com http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com at http www samsung com be http www samsung com cz Samsung Zit Ceska organizacni slo ka yskocilova 4 14000 Praha 4 70 70 19 70 0818 717 100 030 6227 515 3260 SAMSUNG 0 15 Min 08 25 08 65 65 0 15 Min http www samsung com dk http www samsung com ie http www samsung com fi http www samsung com GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND
15. D MENU Channel ENTER ENTER Manual Store TU Manual Strore msn Programme Colour System Sound system Channel Search Store You can scan the frequency ranges available on your television in your area and store all the channels found manually Programme D MENU r Channel ENTER r ENTER Manual Store ENTER Pro gramme Manual Strore _ Colour System Sound system Channel Store ENTER a gt ENTER Inputting the appropriate program number on the screen Adjusting the LCD Display Colour System D MENU Channel ENTER ENTER Manual Store gt ENTER Colour System Manual Strore Programme JP 1 Sound system Channel SECAM Search n NTSC4 43 J Store p F gt ENTER Adjusts repeatedly until the colour is of the best quality Auto lt gt PAL lt gt SECAM lt gt NTSC4 43 Sound System D MENU r Channel gt ENTER ENTER Manual Store gt gt Y ENTER Sound System Manual Strore Programme Colour System Channel Search Store TY gt ENTER Adjusts repeatedly until the sound is of the best quality Channel D MENU r Channel ENTER r ENTER Manual Store gt ENTER Channel Manual Store Programme Colour System Sound System Search 40 MHz Store 9
16. HF Add fl Lock lt gt Move EF Enter P Page O Retum T 4 ENTER Adjusting the LCD Display You can add or delete a channel so only channels you want are displayed td is active when Child Lock is selected to On Child Lock D MENU r Channel gt ENTER 57 r r ENTER Channel Manager T gt ENTER Child Lock Channel Manager Channel List b 3 gt ENTER Protects children from viewing inappropriate programs by blocking certain broadcast or video pro grams The Child Lock feature can be selected only from the remote Sort D MENU r Channel ENTER r ENTER Sort F a1 ENTER It s used to exchange the numbers of two channels Name D MENU r Channel ENTER 57 3 ENTER Name J Name Name ENTER a 4 ENTER Name the device connected to the input jacks to make your input source selection easier The following characters are available Letters of the alphabet A Z Numbers 0 9 Special char acters space Adjusting the LCD Display Fine Tune D MENU r Channel ENTER r Y YS ENTER Fine Tune Fine Tune Cable 10 a T 4 ENTER Due to weak signals or an incorrect antenna configuration some of the channels may not be tuned correctly LNA D MENU r C
17. PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND Appendix Europe 01805 SAMSUNG 726 7864 http www samsung com 0 14 Min 06 80 SAMSUNG 726 7864 http www samsung com 800 SAMSUNG 726 7864 0035 0 2 261 03 710 http www samsung com http www samsung com be 0900 SAMSUNG 726 7864 http www samsung com nl 0 10 Min 815 56 480 0 801 801 881 022 607 93 33 80820 SAMSUNG 726 7864 0800 SAMSUNG 726 7864 902 10 11 30 0771 400 200 0800 SAMSUNG 726 7864 0845 SAMSUNG 7267864 CIS 800 7267 800 7267 8 800 77777 8 10 800 500 55 500 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 110011 0800 112 8888 0120 327 527 1800 88 9999 0800 SAMSUNG 726 7864 http www samsung com no http www samsung com pl http www samsung com pt http www samsung com sk http www samsung com http www samsung com se http www samsung com ch http www samsung com http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com http www samsung uz http www samsu
18. Select Repeat List to play movies or tunes in the list in sequence repeatedly Rotation Sets the picture orientation e Landscape Sets the screen resolution to 1366x768 pixels e Portrait Sets the screen resolution to 768x1366 pixels EWF Enhanced Write Filter Prevents change to and loss of the data saved on the disk e Disable Disables EWF to allow saved data to be changed data on the protected disk drive C When switching from the Enable to the Disable state you can select Commit e Enable Enables EWF to prevent saved data to be changed on the protected disk drive C e Commit Commit the changed data to the protected disk drive C when EWF is in the Ena ble state Commit is not available when EWF is in the Disable state D Menu Available Modes Gdpc pvi gt Elav gt HDMI gt MagicInfo fultv Pictureli Size D MENU f Picture ENTER ENTER Size Auto Vide 16 9 4 3 Just Scan r gt ENTER Use to select PC DVI or other external input sources connected to the LCD Display Use to select the screen of your choice 1 Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 2 16 9 Adjusting the LCD Display Sets the picture to 16 9 wide mode Wide Zoom Magnify the size of the picture more than 4 3 Zoom Magnifies the size of the picture on the screen 4 3 Sets the picture to 4 3 normal mode Just Scan Use the function t
19. Setup ENTER or gt gt T T T T Common Interface 1 Application Info 2 CI Menu System D MENU r r r Digital Menu ENTER Setup ENTER or gt gt YY T T gt T or System ENTER Product Information Signal Information Software Upgrade Reset To keep your product up to date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal It will automatically detect these signals and display the software upgrade banner You are given the option to install the upgrade 1 Product Information D MENU r r Digital Menu gt ENTER T 5 Setup ENTER or T T T T T FF System ENTER ENTER DTV Product Information l Software Version T PERLDEUC 1008 Firmware Version T EMMAZDEUB D0106 2 Signal Information D MENU Digital Menu gt ENTER T 5 Setup ENTER or T T T T T FF System ENTER or ENTER IT Signal Information Service ID 0000 Multiplex TSID 0000 ONID 0000 Network ID 0000 Bit error level op Signal Strength 0 7 Return 3 Software Upgrade Adjusting the LCD Display D MENU r r Digital Menu gt ENTER T 5 Setup ENTER or T T T T T FF System ENTER ov
20. The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to astore selling the same type of the battery or rechargeable battery L Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater Zi Er NG e This may reduce the lifetime of the product and may result in fire Q SJ L Do not drop any objects onto the product or cause any impact to the product AND sara e Otherwise this may result in electric shock or fire Q L Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire dv L When there is a gas leak do not touch the product or the power plug G pl but ventilate immediately o e Ifa spark occurs it may cause an explosion or fire L If the product has been turned on for a long time the display panel C5 becomes hot Do not touch it D R Keep the small accessories in a location out of the reach of children T Toj L Be careful when adjusting the angle of the product or the height of the stand oO This may result in personal injury as your hand or fingers may be come caught e Also if you tilt the product too far it may fall an
21. er ENTER Adjusts the screen location vertically Auto Adjustment MENU ENTER Picture gt or ENTER Auto Adjustment Auto Adjustment dS 30 The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Available in PC mode only Note The direct button on the remote control is the AUTO button Signal Balance Li This is used to make up for the weak RGB signal transmitted by a long signal cable MENU ENTER Picture 0 gt or ov ov ENTER Signal Balance Adjusting the LCD Display Available in PC mode only Signal Balance MENU ENTER Picture gt gt or or ENTER Signal Balance ENTER Signal Balance Move Enter SO Retum Y gt ENTER Selects either On or Off with the signal control Signal Control MENU ENTER Picture 0 gt gt or or ENTER Signal Balance r gt ENTER Signal Control 1 R Gain MENU ENTER Picture gt or ENTER Signal Bal ance gt ENTER Signal Control ENTER R Gain ENTER af ENTER 2 G Gain MENU 7 ENTER Picture 0 gt of ENTER Signal Bal ance gt ENTER Signa
22. inside the product through the ventilating openings input and output terminals etc e If water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L When using a fixed screen for a long time an afterimage or stain may occur O e Ifyou are not using your product for a long period of time put it into sleep mode or use a moving screen saver L Set a resolution and frequency appropriate to the product e Otherwise your eyesight may be damaged 4 TON gt V over P A t Gummi In wi Sr Safety Instructions L When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing L If you continually move closer to the product screen your eyesight may be failing Take a rest for at least five 5 minutes after using the LCD Display for one 1 hour This reduces the weariness of your eyes L Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e If you use the product in a location exposed to vibrations it may damage the product and result in fire L When moving the product turn the power off and disconnect the power plug antenna cable and all the c
23. le NYE Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw B Anchor 1 Hanger A 11 4 11 4 Wall Bracket Assembly HJ Note There are two hinges left and right Use the correct one I Insert and tighten the Captive Screw in the direction of the arrow Introduction When done mount the wall bracket on the wall There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length AN g he j k f I SI amp A Length between the two locking holes Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A Introduction Ef i Pa I p ar Gp yt a RA n E El ie Fi a t E pe fe a i a y4 Ulat a TA P pe Hd l i i er ys a we i mi ar v ki t j To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same Il Remove the 4 screws on the back of th
24. 1G Windows XP WMP 9 or 512M Windows later 2000 Serv ice Pack 4 Adjusting the LCD Display Input Available Modes dPC DvI EJ av C HDMI M MagicInfo li tv Source List LA 4B MENU ENTER Input ENTER Source List T gt ENTER Use to select PC DVI or other external input sources connected to the LCD Display Use to select the screen of your choice Il PC 2 DVI 3 AV 4 HDMI 5 MagicInfo 6 TV Note e The direct button on the remote control is the SOURCE button e For PC and DVI this is deactivated if the cable is disconnected Edit Namel Mhi MENU ENTER Input gt Edit Name Adjusting the LCD Display Fr gt ENTER Name the input device connected to the input jacks to make your input source selection easier l PC 2 DVI 3 AV 4 HDMI Picture PC DVI Magicinfo Mode Available Modes LGdpC pvI gt Dav gt HDMI gt MagicInfo Wry MagicBright LT MENU ENTER Picture ENTER MagicBright ve Entertain Internet je Custom T gt ENTER MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching Currently four different modes are available Entertain Internet Text and Custom Each mode has its own pre configured brightness value You can easily select one of the four settings by sim
25. 30 fps File MS Office Word Excel Some files may not be suppor Power Point HTML PDF ted depending on the format or the version Install the proper viewing freeware program to see MS Specifications Remarks Office Word Excel Power Point or PDF documents Item Specification Internet Browser MS Internet Explorer Not Support Flash Java Applet Security Site Language English OS Windows XP Embedded Magicinfo Pro Server Requirement CPU RAM Ethernet OS Application Minimum P1 8 GHz 256M 100 M I Windows WMP 9 or lat G XP er Recommended P3 0 GHz 512M 100 M I Windows WMP 9 or lat G XP er PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature PowerSaver State Normal Opera Power saving Power off Power off tion mode Power but Power ton switch Power Indicator On Blinking On Off Power Consump 251 W Less than 5 W Less than 5 W 0 W tion Preset Timing Modes If
26. 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 FF VESA 1152 x 864 67 500 75 000 108 000 F VESA 1280 x 768 47 776 59 870 79 500 VESA 1280 X 960 60 000 60 000 108 000 FT VESA 1280 X 1024 63 981 60 020 108 000 TF VESA 1280 X 1024 79 976 75 025 135 000 FI Specifications Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz VESA 1360 x 768 47 712 60 015 85 500 VESA 1600 x 1200 75 000 60 000 162 000 HF VESA 1920 x 1080 66 587 59 934 138 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Display ba Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen 1f the best picture quality 1s not provided for TFT LCD e Resolution 1360 1920 x 768 1080 e Vertical frequency refresh rate 60 Hz ba TFT LCD panels manufactured by using advanced semiconductor technology with a
27. 9 inch Without Stand 1102 0 x 719 0 x 311 0 mm 43 4 x 28 3 x 12 2 inch 27 0 Kg 59 5 lbs With Stand With protection glass option 32 0 kg 70 5 Ibs VESA Mounting Interface 600 x 400 mm Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings In most cases the LCD Display installation will proceed auto matically unless the user wishes to select alternate settings Specifications Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with preci sion of lppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 220 800 Note Design and specifications are subject to change without prior notice 77 Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives
28. Available MagicInfo Quick Launch Button When you press this button current picture mode is displayed on the lower center of the screen AV HDMI TV P MODE The LCD Display has four automatic picture settings that are pre set at the factory Then push button again to circle through avail able preconfigured modes Dynamic Standard Movie Custom PC DVI MagicInfo M B MagicBright MagicBright is a feature providing the optimum viewing envi ronment depending on the contents of the image you are watching Then push button again to circle through available preconfigured modes Entertain Internet Text Custom DUAL STEREO MONO DUAL I DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV MTS You can select MTS Multichannel Television Stereo mode Audio Type MTS S Mode Default FM Stereo Mono Mono Manual Change Stereo Mono gt Stereo SAP Mono SAP Mono Every time you press the button a PIP screen appears This fuction does not work for this LCD Display Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window This fuction does not work for this LCD Display Mechanical Layout 400CXn Mechanical Layout NETWORK MODEL SIZE Introduction 500 5 580 5
29. Cycle Change the characters color and background color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME 02348 20 30 e Every 30 minutes change the characters with movement FLIGHT TIME AW 1g W FLIGHT TIME QZ2348 20 30 i SE 44 Q2348 20 30 Step 1 Step3 e All area display Moving image together with Logo periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours in use e The best way to protect your LCD Display from Image retention is to turn Power off or set your PC or System to operate a Screen Saver program when you are not using it Also Warranty service will be limited based on instruction guide Apply the Screen Scroll function on Product e Apply the Screen Scroll function Symptom Horizontal Bar with Black Color move up and down Horizontal Bar with Black color ELIGNTI Vick 02348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Screen Scroll e Time Interval I 10 hours Recommend I e Time Period 1 5 second Recommend 5 Information Note Please check CD s User Guide at OSD Function some model s will not available o Apply the Screen Pixel function on Product e Apply the Screen Pixel function Symptom Dot with Black Color move up and down FLIGHT TIME OZ348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up g
30. Multi Control Assigns an individual ID to the SET MENU or or ENTER Multi Control gt ENTER Move Enter ORetum Adjusting the LCD Display T gt 0 9 e ID Setup Assigns distinctive IDs to the SET ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter setting becomes activated Magicinfo Available Modes gt LdpPc pvi gt Dav gt HDMI i MagicInfo Hrv Note e The operating system for this set only supports English so the other languages might be corrupted on the screen e For MagicInfo a remote control is available for MagicInfo However it is recommended using a separate USB keyboard e For MagicInfo in Device mode moving external devices while booting may cause errors Set up external devices only if the LCD Display turns on e Do not unplug the LAN cable used for the network ex video display Otherwise the program MagicInfo may stop If you do unplug the cable restart the system e Do not unplug the LAN cable used by an USB device ex video display Otherwise the program MagicInfo may stop e To access other sources press the SOURCE button in MagicInfo e The preset password for the LCD Display is 000000 e The server program s Power On option works only if the LCD Display s power is completely shut off Please make sure not to use the Power On option when the L
31. Q A Making a Bootable USB Flash Disk 1 You can turn a common 512 MB or bigger USB storage media into a bootable disk using a USB bootable disk creation tool For example the HP USB Disk Storage Format Tool 2 Copies the OS ghost image and executables to your USB disk 3 Enter the BIOS menu of your set by pressing the F2 key in the BIOS logo screen Then enable the USB Boot First option by selecting that option and pressing the Enter key in the Boot menu 4 Switch your set on while your USB disk is connected and boot up in DOS mode 5 Run C ghost exe and choose Local Partition From Image from the menu Choose the ghost image to update your USB disk with and choose the target disk 6 When the ghost image update finishes the set will be rebooted automatically How can I change the frequency The frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I Adjusts the resolution Windows XP Troubleshooting Set the resolution in the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can I set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes
32. Renumber Preview Adjusting the LCD Display Note e A icon is shown next to the selected channel and the channel will be added to the favourite channel list e To undo press the ENTER button again e Select All Select all channels currently displayed e Select None Deselect all selected channels e Preview Displays a currently selected channel s The Favorite Channels settings have been completed Add e D MENU r r r Digital Menu ENTER Digital Channel ENTER ov Edit Favourite Channels ENTER Five EEC THREE abe OVC Add Renumber Preview Delete You can use this function when one or more favourite channels have been selected Renumber e D MENU or r Digital Menu ENTER Digital Channel ENTER ov Edit Favourite Channels ENTER BEC TWO BEC THREE 15 abel Press the green button 77 Note e The space for entering the number is a blank Enter the new channel number Press ENTER button to store or RETURN button to cancel Note e Press the button to delete an entered digit If you enter a number already assigned to another channel the number is assigned to the selected channel and the previous number assigned to the selected channel is assigned to the other channel That is the two numbers are exchanged The favorite channels are automatically sorted in ascending order of channel numbers Ad
33. The LCD Display is using its power management system Press any key on the keyboard The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the LCD Display and the computer to ensure that the con nector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A No sound Ensure that the audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound level is too low Check the volume level Troubleshooting If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed EEE The remote control buttons do not respond Check the polarities of the batteries Check if the batteries are empty Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity Problems related to Magicinfo Note Making a Bootable USB Flash Disk Q amp A
34. for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment Magiclnfo Client Item Specification Remarks LAN 1 Gbps USB Keyboard Mouse Mass Stor USB removable storage can be age Device Compatible supported Contents Photo Supported File Format BMP 2274x1704 or less JPEG Music Supported File Format MP3 Sound bandwidth 50 Hz to 15 kHz Movie MPEG1 WMV Max 1280 x 720 30 fps File MS Office Word Excel 78 Some files may not be suppor Power Point HTML PDF ted depending on the format or the version Install the proper viewing freeware program to see MS Office Word Excel Power Point or PDF documents Internet Browser MS Internet Explorer Not Support Flash Java Applet Security Site Language English OS Windows XP Embedded Magicinfo Pro Server Requirement CPU RAM Ethernet OS Application Minimum P1 8 GHz 256M 100 M I Windows WMP 9 or lat G XP er Recommended P3 0 GHz 512M 100 M 1 Windows WMP 9 or lat G XP er Specifications PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is
35. not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature PowerSaver When used as a Network LCD Display State Normal Opera Power saving Power off Power off tion mode Power but Power ton switch Power Indicator On Blinking On Off Power Consump 310W Less than 5 W Less than 5 W 0 W tion Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25115 IBM 640 x 480 31 469 59 940 25175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 FG VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 TIF VESA 848 x 480 31 020 60 000 33 750 a VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x
36. the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System l pA 3 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button 10 11 Using the Software Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dia logue box Microsoft
37. the frequency Introduction power QOorr Number Buttons DEL button VOL ok MUTE TV DTV F MENU i INFO COLOR BUTTONS ELT TTX MIX STILL SAMSUNG AUTO S MODE MDC LOCK SOURCE ENTER PRE CH vw CHP A D MENU GUIDE RETURN Up Down Left Right buttons exit srs MagicInfo P MODE FI DUAL MTS PIP SWAP B6 6099998988968 8 906 66W M6 96 9090090 00 L t POWER Turns the product On 2 C off Turns the product Off 3 Number Buttons Press to change the channel 4 DEL button 5 VOL 6 2K MUTE 7 TV DTV 3 FI MENU o 10 INFO 11 COLOR BUTTONS 12 L TTX MIX 13 STILL 14 AUTO 15 SMODE 16 MDC 17 LOCK 18 SOURCE 19 ENTER PRE CH 20 WCH PA 21 D MENU 22 GUIDE 23 3 RETURN Introduction The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Pauses mutes the audio output temporarily This is displayed on the lower left corner of the screen The audio resumes if MUTE or VOL is pressed in the Mute mode Selects the TV and DTV mode directly Opens the on screen menu and exits from the menu or closes the adjustment menu Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channe
38. two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall There are two hinges left and right Use the correct one Introduction A Captive Screw B Wall Bracket C Hinge Left D Hinge Right 2 Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length a Tr p wp Le k a idm he Ey LT Ang k r a i i amp A Length between the two locking holes 3 Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A s E pr E j a 3 4 af i a bs ar GE r hy Pi Wag Pang _ ah te i sa y ij au a Ze Jo aa be F er le pr ay 1 or at at ar i or sage er eS E a To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same Introduction Remove the 4 screws on the back of the product Insert the screw B into the plastic hanger N Notice e Mount the pro
39. 63 981 60 020 108 000 tr 79 976 75 025 135 000 a 47 112 60 015 85 500 HF 75 000 60 000 162 000 Tar 66 587 59 934 138 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz General Model Name LCD Panel Size Display area Pixel Pitch Synchronization Horizontal Vertical SyncMaster 460CXN 46 Diagonal 116 cm 1018 08 mm H x 572 7 mm V 0 53025 mm H x 0 53025 mm V 30 81 kHz 56 85 Hz Specifications Display Color 16 7M Resolution Optimum resolution 1920 x 1080 60 Hz Maximum resolution 1920 x 1080 60 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Yo Separate H V sync Composite SOG TTL level V high gt 2 0 V V low lt 0 8 V Maximum Pixel Clock 165MHz Analog Digital Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Signal Cable 1 5pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight 1102 0 x 658 0 x 125 5 mm 43 4 x 25 9 x 4
40. 9 2 Zoom I 3 Zoom 2 4 4 3 5 Just Scan Not available in Dynamic Contrast mode of On Note The Zoom1 Zoom2 are not available HDMI The Just Scan are available in HDMI Digital NR Digital Noise Reduction MENU ENTER Picture 0 gt or or ENTER Digital NR T gt ENTER Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Film Mode MENU ENTER Picture T ENTER Film Mode Adjusting the LCD Display Move Enter Return T ENTER Turns Film Mode Off On The Film Mode feature offers you a theater quality viewing experience Not available in HDMI Mode 1 Off 2 On Dynamic Contrast MENU ENTER Picture gt YY oF oF oF ENTER Dynamic Contrast O Move Enter O Retum F gt ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Brightness Sensor MENU ENTER Picture T ENTER Brightness Sensor 4 ENTER Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness k Sound Adj
41. CD Display is in the process of shutting down since this may cause system errors on the LCD Display e Inthe OSD image of MagicInfo Network mode is the same as Device e When using MagicInfo with the MagicInfo Pro Server Program perform Network mode e When using MagicInfo with the device directly connected to LCD Display execute Device mode e Press ALT F12 to directly go to the MagicInfo Window screen Adjusting the LCD Display e To setup MagicInfo on a Windows screen a keyboard and mouse are required e To setup MagicInfo on a Windows screen refer to the MagicInfo Server Help It is highly recommended not to turn off the AC power during an operation e For pivoted LCD Displays ticker transparency is not supported e For pivoted LCD Displays a screen resolution of up to 720 480 SD is supported for movies e For drive D EWF is not applied e When the contents of Setup have been changed when EWF is in the Enable state to save the changes in the disk you must Commit them e By selecting Disable Enable or Commit the system is restarted Photo 1 The JPEG BMP file format are supported Auto OOOO o 00060 H iaka F panto Photo le ie Office I HTML ee a Sete irs terri ha peel ard Automatically fits the image to the window Original Shows the properties of the original file Adjusting the LCD Display Slide Show Devin OGO Do CA 1 o o OOOO Musje H Offtes I HTML Displays
42. Color Tone LIT MENU ENTER Picture gt Y gt ENTER Color Tone fr gt ENTER The color tones can be changed Not available in Dynamic Contrast mode of On l pA 2 4 5 off Cool Normal Warm Custom Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Color Control LIT Red Adjusts individual Red Green Blue color balance MENU ENTER Picture gt ENTER Color Control Not available in Dynamic Contrast mode of On NA Note If you adjust the picture by using the Color Control function Color Tone will turn to the Custom mode MENU 7 5 ENTER Picture gt gt r ENTER Color Control ENTER Red Green Blue Adjusting the LCD Display 4 ENTER MENU ENTER Picture gt ENTER Color Control gt ENTER Green all k ENTER MENU F ENTER Picture gt gt ENTER Color Control gt ENTER Blue all er ENTER Color Temp LIT MENU 7 5 ENTER Picture ENTER Color Temp Color Temp __ 5000K k Adjust 4 k ENTER Color Temp is a measure of the warmth of the image co
43. D provides a screen quality somewhere between HD and the existing an alog method It exhibits a two times better screen quality than analog TV SRS TS XT This feature outputs sonorous and vivid 3D sound as for 5 1 chan nel speaker sound but through a 2 channel speaker It has a good effect when stereo signals are input Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indi cates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrol led waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustaina ble reuse of material resources PG Household users should contact either the retailer where they purchased this product or their local government of fice for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This prod uct should not be mixed with other commercial wastes for disposal Authority Information in this document is subject to change without notice O 2008 Samsung Electronics Co Ltd All rights reserved
44. IN Personal Identification Number code that is defined by the user The on screen menu will instruct you to assign a PIN code you can change it later if necessary Note e The default PIN code for a new TV set is 0000 e Ifyou enter an invalid PIN code the Invalid PIN code Please try again message is displayed Subtitle D MENU r r Digital Menu ENTER Setup ENTER or gt gt Subtitle ENTER TT Menu Transparency Opaque Change PIN Parental Lock Subtitle Made F amp Move Enter ENTER You can activate and deactivate the subtitles 1 On 2 Off Subtitle Mode D MENU r r Digital Menu ENTER Setup ENTER or gt gt Subtitle Mode ENTER DTW Setup Menu Transpareney Opaque Change PIN Parental Lock Subtitle On he Hard of hearing E Enter Return r gt ENTER Use this menu to set the Subtitle Mode Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing impaired person 1 Normal Adjusting the LCD Display 2 Hard of hearing Note e Ifthe programme you are watching does not support the Hard of hearing function Normal automatically activates even though Hard of hearing mode is selected Audio Format D MENU Digital Menu gt ENTER r Setup gt ENTER or gt gt gt
45. Introduction LCD Display Head NETWORK MODEL SIZE 80 j SEE Oran gay rar PE ee eee TVETER ESO Gb KUNG BG KG ETTET 500 5 580 5 Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation professionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions 600 X 400 WALL MOUNT HOLE MBX L8 0 12 0 MACHINE SCREW EA SAMSUNG Introduction Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product a h NI i Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw B Anchor 1 Hanger ANID 4 11 4 Wall Bracket Assembly Note There are
46. PIN MENU yr or r ENTER Setup ENTER Safety Lock PIN 00 9 gt 00 9 00 9 The password can be changed Energy Savingl 1 Mh MENU r or ENTER Setup T ENTER Energy Saving The MDC Magicinfo could not work in Power Off mode while the Energy Saving mode is on T gt ENTER This feature adjusts the power consumption of the unit in order to save energy 1 Off 2 On Note If you want to reduce the standby power consumption set Energy Saving to On However when Energy Saving is On you cannot use the remote Power On function of the MDC and the WOL Wake On LAN function of MagicInfo HDMI Black Level MENU r r or ENTER Setup ENTER HDMI Black Level Adjusting the LCD Display T gt ENTER When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low Video Wall A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each scr
47. TER Time Clock Set MENU or or ENTER Setup gt ENTER Time gt ENTER Clock Set Minute am pm alaga T 4 ENTER Current Time Setting Sleep Timer MENU or or ENTER Setup ENTER Time gt ENTER Sleep Timer 30 E Enter O Reium F gt ENTER Turns the LCD Display off automatically at certain times 1 Off 2 30 3 60 4 90 5 120 Adjusting the LCD Display 6 150 7 180 On Timer MENU or or ENTER Setup gt ENTER Time 1 5 gt ENTER On Timer Hour Minute am pm 2 ee Activated Volume C MoJ 30 drove 4 t ENTER Turns the LCD Display on automatically at a preset time Controls the mode and the volume level at the time the LCD Display turns on automatically Off Timer MENU or or ENTER Setup gt ENTER Time gt r ENTER Off Timer Hour Minute am pm ak 12 BE am T Activated a ENTER Turns the LCD Display off automatically at a preset time Menu Transparency 1 Thi MENU or or ENTER Setup ENTER Menu Transparency high 7 Medium E Low T gt ENTER Change the transparency of the background of the OSD Adjusting the LCD Display 1 High 2 Medium 3 Low 4 Opaque Safety Lock
48. Windows NT Operating System l PA Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file l 2 10 Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Wind
49. ables connected to the product e Otherwise it may result in electric shock or fire L Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage L Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately L When replacing the battery insert it with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid Safety Instructions Use only the specified standardized batteries and do not use a new battery and a used battery at the same time e Otherwise the batteries may be damaged or cause fire personal in jury or damage due to a leakage of the internal liquid L
50. age selection feature that provides English subti tles caption or character information services from broadcasting services ex AFKN or video tapes marked CC and which are especially useful for studying English This enables the user to enjoy the broadcasting service in both Korean and foreign original language as well as in stereo mode This system uses two carriers to transmit voice data Countries such as South Korea and Germany use this system Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system including the United States Canada Chile Vene zuela and Taiwan It also refers to the organization that has been organized to promote its development and management Electronic Industries Association of Japan DVI is the acronym for Digital Video Interface It is a new type of video interface technology that provides the maximum screen quality for high quality display devices and high end graphics cards including flat panel LCD monitors This is an interface that connects both quality video signals and digital audio signals with a cable without any compression e HD High Definition Appendix In HD 1080 line 2x density beaming 10801 is used HD provides a five times clearer screen quality than the existing analog method and has a wide 16 9 aspect ratio e SD Standard Definition In SD 480 line double beaming 4801 is used S
51. agicinta Pro Installshield Wizard Password is needed to use MagicInfo program This password will be used to login MagicInfo 6 Choose a folder to install the MagicInfo Pro program Magicinta Pro Installshield Wizard Choose Destination Location Select folder where setup will install files Install Magiclnfo Pro to C Program Files5 ECM agiclnto Pro InstallShield Cae OEE 7 Click Install Using the Software Magicinta Pro Installshield Wizard Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation IF pou want to review or change any of your installation settings click Back Click Cancel to exit the wizard InstallShield The Setup Status window appears Magicinto Pro Installshield Wizard Setup Status Magiclnto Pro is configuring your new software installation Installing C Program Files SEC Magiclnto Pro MadiclntoPro exe FETTER InstallShield It is recommended restarting the system for the normal operation of the MagicInfo Pro Server program Click Finish Using the Software InstallShield Wizard Complete The InstallShield Wizard has successfully installed Magiclnfo Pro Click Finish to esit the wizard Cancel HE q IC Into FO 11 Double click the icon to start the program System Requirements Minimum Recommen ded CPU P1 8 P3 0Ghz RAM Ethernet OS Application 256M 100M
52. arpness all k ENTER Adjusts the picture Sharpness Color MENU ENTER Picture gt ENTER Custom 1 5 ENTER Color 4 ENTER Adjusts the picture Color Tint MENU ENTER Picture gt ENTER Custom 5 ENTER Tint all er ENTER Adds a natural tone to the display Color Tone Adjusting the LCD Display MENU ENTER Picture Y gt ENTER Color Tone rf gt ENTER Wann CE Wam The color tones can be changed The individual Color components are also user adjustable Not available in Dynamic Contrast mode of On l 2 6 off Cool2 Cooll Normal Warmi Warm2 Note If you set the Color Tone to Cool2 Cooll Normal Warm1 or Warm2 the Color Temp function is disabled Color Temp MENU ENTER Picture ENTER Color Temp 4 me ENTER Color Temp CO 5000K ar Adjust Color temp is a measure of the warmth of the image colors Not available in Dynamic Contrast mode of On Note This function is only enabled if the Color Tone is set to Off Size MENU ENTER Picture 5 gt ENTER Size Adjusting the LCD Display E zoomi Zoom EE T gt ENTER The Size can be switched 1 16
53. ay Reset MENU or ov ENTER Setup 0 70 gt gt FF TT F ENTER Side Gray Adjust F Enter O Return F gt ENTER Select the brightness of the grey for the screen background 1 Off 2 Light 3 Dark Reverts the product settings to factory defaults The Reset function is only available when PC DVI is being used MENU or or ENTER Setup 0 70 YY 3T T5 Fo T gt ENTER Reset Image Reset Li MENU or or ENTER Setup 0 70 gt YY FF 5 Fo T gt ENTER Reset ENTER Image Reset Image Reset O I Ok Move Adjust O Retum 4 ENTER Adjusting the LCD Display Note Available in PC mode only Note The Reset function is not available when Video Wall is On Color Reset ba Ls MENU or or ENTER Setup 0 70 gt Fo Fo FF oF gt Fo T gt ENTER Reset ENTER Color Reset Color Reset 4 er ENTER Lamp Control MENU or or ENTER Setup 0 70 70 Fo Fo Fo Fo TF gt FF gt OFT ENTER Lamp Control Lamp Control af ENTER Adjusts the inverter lamp in order to reduce energy consumption aie Note This function does not operate when Dynamic Contrast is set to On in PC DVI AV HDMI TV modes Multi Control Available Modes lpc DVI Elav HDMI O MagicInfo Wry
54. ct it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes gt gt O 27 F O FBP F O F BF QO Troubleshooting Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display Ifnot reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display Ifnot reset them referring to the current Information under the LCD Display menu and Preset Timing Modes The image is too light or too dark Adjusts the brightness and contrast Refer to the Brightness Contrast The screen color is inconsistent Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white is poor Adjust color using Custom under OSD Color Adjustment menu The Power Indicator blinks The LCD Display is currently saving the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds
55. d balance between the left and right speakers Auto Volume ba Wut MENU r ENTER Sound ENTER Auto Volume T gt ENTER Reduces the difference in volume control between broadcasters 1 Off 2 On Adjusting the LCD Display SRS TS XT MENU or ENTER Sound ENTER SRS TS XT T gt ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On Note The direct button on the remote control is the SRS button Setup Available Modes Gdpc pvi Elav HDMI gt MagicInfo rv Language MENU or or ENTER Setup ENTER Language ae P Francais M italiano T gt ENTER You can choose one of 11 languages Adjusting the LCD Display English Deutsch Espanol Francais ltaliano Svenska PyccKMn Portugu s PE A 3 850 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Time Selects from one of 4 time settings Clock Set Sleep Timer On Timer and Off Timer MENU r or or ENTER Setup EN
56. d cause personal injury o L Do not install the product in a location low enough for children to reach M gt Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface of L Do not put any heavy objects on the product e This may result in personal injury and or damage to the product A Introduction Package Contents Note Please make sure the following items are included with your LCD Display If any items are missing contact your dealer Contact a local dealer to buy optional items E Note This stand is not for the Floor Standing Type Unpacking LCD Display Manuals Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Cables D Sub Cable Power Cord Others Introduction Others Remote Control Batteries AAA X 2 Cleaning Cloth Not available in all loca tions Sold separately DVI Cable Wall Mount KIT LAN Cable Semi Stand KIT Note Cleaning Cloth is only provided for highly polished black products as a product feature Your LCD Display Front MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Navigate buttons Down Up buttons Channel buttons Moves from one menu item to another vertically or adjusts selected menu values When OSD is not on the scre
57. duct on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket Introduction A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 2 0 50 m 320 2180 gt 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle 3 You can adjust the bracket angle between 2 and 15 Make sure to use the top center and not the leftor the right side of the product to adjust the angle Connections Connecting a Computer sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect
58. e CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon sg mtarmaek ae Pape Deu ae lt Interret Capbhorer a E mail la Mie Boece Cece Sutin Cera EE Piei Pm Pete Ea rae si mr eT DEE ES may Pussi Tana ida meer mg nn ae Kieko pod is Bi foci ail sail phere Woon 3 i 6 Ra ae Ree Pair Br Larger mail perl KE vindens media tarer ue we w MSH Euplosar SoB tits and Support aT mma mai am din irs sas tp Fen JE jr a nde Moro Hal T pun a Palanas a sd ons LA os EF 3 Click Display icon and choose the Settings tab then click Advanced Be EF gem Agere a et Gum D tl cima ar a TE a di a lag kg E a aa F ksp Naka a Dagsa or pick a Control Panel icon Pig ami Play Mamita on DE Prophe Ill 1 z r Sen endene y y Enka pasy Ti baa OP teks ymaa Lao ih ca Mone Hikghana 37 kat i u jernet TENESI 1024 by 760 pale Cms a 4 Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and SO Prophet IN Properthe MM Geforces Selection Color Comection eens asen Mordor Troubleshoot Color Management Felger kje Pung and Plass Mostar gro cette ener abah vate ED Hans o C Hide res that this order carrot daplay Chara thea cheek baa aller pu lo melect dapa nodai acana een me mn TH maa den Device ube iiaa ha lenene rakai 5 Click U
59. e in verse number of the Horizontal Cycle is called Horizontal Fre quency Unit kHz Showing the horizontal lines of the screen from the top to the bot tom sequentially is called the Non Interlace method while show ing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange informa tion automatically This monitor follows the international standard VESA DDC for the Plug amp Play function The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the ac curacy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1360 1920 x 768 1080 this means the screen is composed of 1360 1920 horizontal dots horizontal resolution and 768 1080 vertical lines vertical resolution Balances the levels of the sound coming from each speaker in televisions with two speakers Whereas the terrestrial broadcasting is delivered via frequency signals through the air cable broadcasting is transmitted via a ca CATV VHF UHF Channel Fine Tuning DVD DTV Broadcasting Digital TV Broadcasting LNA L
60. e product 2 Insert the screw B into the plastic hanger h AN Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product Introduction 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 320 2180 gt 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle 3 You can adjust the bracket angle between 2 and 15 Introduction Make sure to use the top center and not the leftor the right side of the product to adjust the angle Mechanical Layout 460CXN Mechanical Layout NETWORK MODEL SIZE F x T a PAN a cl El IP 1049 4 1024 4 602 65 B
61. ease call the phone number on the Information section or contact your dealer Specifications General General Model Name SyncMaster 400CXN LCD Panel Size 40 Diagonal 101 cm Display area 885 17 mm H X 497 7 mm V Pixel Pitch 0 648 mm H X 0 648 mm V Synchronization Horizontal 30 81 kHz Vertical 56 85 Hz Display Color 16 7M Resolution Optimum resolution 1360 x 768 60 Hz 1366 x 768 60 Hz depends on graphics card used Maximum resolution 1920 x 1080 60 Hz RB Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Yo Separate H V sync Composite SOG TTL level V high gt 2 0 V V low lt 0 8 V Maximum Pixel Clock 165MHz Analog Digital Power Supply AC 100 240 V 10 Yo 50 60 Hz 3 Hz Signal Cable 1 5pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight 971 0 x 582 0 x 119 0 mm 38 2 x 22 9 x 4 7 inch Without Stand 971 0 x 641 5 x 311 0 mm 38 2 x 25 3 x 12 2 inch With Stand 21 0 kg 46 3 Ibs With protection glass option 26 5 kg 58 4 lbs Specifications VESA Mounting Interface 600 x 400 mm Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display ca
62. een When the Video Wall is on you can adjust the Video Wall screen setting MENU r or or ENTER Setup 9 ro T ENTER Video Wall Note When Video Wallis running the Auto Adjustment Image Lock and Size functions are not available Video Wall does not operate in MagicInfo mode Video Wall MENU r or ENTER Setup 0 ro Fo T ENTER Video Wall ENTER Video Wall Y gt ENTER Turns Off On the Video Wall function of the selected display Off On 1 Off 2 On Adjusting the LCD Display Format MENU yr or ENTER Setup 0 ro T ENTER Video Wall gt ENTER Format Y gt ENTER The Format can be selected to see a divided screen 1 Full Provides a full screen without any margins 2 Natural Displays a natural image with the original aspect ratio intact Horizontal MENU yr or ENTER Setup 0 ro Fo T ENTER Video Wall gt ENTER Horizontal F gt ENTER Sets how many parts the screen should be divided horizontally Five adjustment levels 1 2 3 4 and 5 Vertical MENU yr or ENTER Setup 0 ro Fo T ENTER Video Wall T ENTER Vertical Moe Enter DRetum Adjust
63. en push the button to adjust channel Rear Introduction Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adjusts selected menu val ues When OSD is not on the screen push the button to adjust volume ENTER button ENTER Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Changing the source is only allowed for external devices that are connected to the LCD Display at the time PC DVI AV HDMI MagicInfo TV D MENU Opens the on screen D MENU Q Power button J Use this button for turning the LCD Display on and off Brightness Sensor The product s Brightness Sensor function automatically detects the surrounding brightness using a brightness sensor and adjusts its brightness accordingly Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods 10 Remote Control Sensor Aim the remote control towards this spot on the LCD Display Note For detailed information concerning cable connections refer to Connecting Cables under Setup The LCD Display s configuration at the back may vary slightly depending on the LCD Display model Introducti
64. ersonal injury e Use a cabinet or rack of a size appropriate to the product LIDO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD UCT e Otherwise this may result in fire L Keep heating appliances as far away from the power cord or the prod uct as possible e Otherwise this may result in electric shock or fire Safety Instructions L Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the internal temperature When putting the product down make sure to put it down softly PE j e Otherwise this may result in damage to the screen display L Do not place the front of the product on the floor fe ON e Otherwise this may result in damage to the screen display L Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount q gt L Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall a e Otherwise it may result in fire due to an increase in the internal tem perature Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in I I l I S w I e Ifrainwater enters the product it may result
65. fter images on the screen by moving long black and white vertical lines Adjusting the LCD Display Eraser MENU or or ENTER Setup 0 T T ENTER Safety Screen gt T gt 7 5 F ENTER Eraser This function prevents after images on the screen by moving a rectangular pattern Resolution Select Li MENU rf or ENTER Setup 0 ENTER Resolution Select F gt ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz by using this function Resolution Select you can have the picture displayed on the screen in the specified resolution Note Available in PC mode only 1 Off 2 1024 X 768 3 1280 X 768 4 1360 x 768 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz Power On Adjustment MENU or or ENTER Setup 0 0 Fo Fo T F ENTER Power On Adjustment Adjusting the LCD Display Adjust Enter O Retum T gt ENTER Adjusts the Power On time for the screen A Caution Set the Power On time to be loger to avoid overvoltage Side Gr
66. ge http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tra vasad kar Arah mabaling the softerane bai a Samsung mawa het Fah lo diria the vated ren al Caner po Samsung awa Diyes Proenlei Buses Dake Dumas Yaaay Digtal Sipra Ora D at s t Bol Back Drevet Ur vstan Samung Fa 14200 TOGO Mot pal signed To weew dekade aboul ho dras flow To update thee ches for then dawa if the dosa kada after upang iho danser roll bab bo iha Gere mababad desi Ta urate tha dna bihari L Chee Cf 10 Using the Software Plog and Play Monitor and A Prophet WP roporiies Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps l pA 3 Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install 10 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel Ifthe Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click
67. glish is the default in cases where the selected language is unavailable in the broadcast Subtitle Language D MENU r r r Digital Menu ENTER Language ENTER T ENTER Subtitle Language gt ENTER Language Audio Language subtitle Language Teletext Language Preference You can change the default value for subtitle audio teletext languages Displays the language infor mation for the incoming stream Note e English is the default in cases where the selected language is unavailable in the broadcast Teletext Language D MENU Digital Menu ENTER T 5 Language 5ENTER T ENTER Teletext Language ENTER _ Language Audio Language Subtitle Language Teletext Language Preference Move Ls Enter Retur You can change the default value for subtitle audio teletext languages Displays the language infor mation for the incoming stream Note e English is the default in cases where the selected language is unavailable in the broadcast Preference D MENU r r Digital Menu ENTER T 5 Language 5ENTER T ENTER Preference gt ENTER Adjusting the LCD Display Audio Language Subtitle Language Teletext Language Preference This menu consists of 6 sub menus Primary Subtitle Language Secondary Subtitle Language Primary Audio Language Secondary Audio Lang
68. hannel ENTER 57 5 53 T ENTER LNA T Channel ab More Fine Tune m ENTER Turns the low noise amplifier on or off Setup Plug amp Play D MENU r r 5 Setup gt ENTER ENTER Plug amp Play lt lt Plug amp Play a Start Plug amp Flay You can manage the entire configuration Language D MENU r r Setup gt ENTER ENTER gt Language Plug amp Play You can choose one of 18 languages Adjusting the LCD Display English Deutsch Francais Italiano Espanol Nederlands Portugu s EAAnwixd e tina Srpski Hrvatski Romana Magyar Polski Pyccxwa bunrapcxw T rk e Slovensky The language chosen affects only the language of the OSD Digital Menuli Guide Now amp Next Guide D MENU gt gt gt Digital Menu gt ENTER Guide gt ENTER ENTER Now amp Next Guide ga SR 27 Discovery 13 28 Wed 16 Fab Extreme Machines Armoured Cars Mo Informator Closedown A patch of Blue Hard Sell Saw This and Theught Extreme Machines Ar Time Team Programmes resume at This Old House With si The Bugs Bunny amp roa The Grim Adventures o Closedown Inspector Gadget For the six channels indicated in the left hand column displays the Current programme and the Next programme information Full Guide D MENU ov Digital Menu gt ENTER Guide gt ENTER Y ENTER f Full Guide
69. i Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk lisent Ihe marulachaei s matallabon dik and then make sue that the conect drive k selected below Ea Copy manulachuner s es brome Hardware Update Wizard Select the device driver you want bo inaladi for thie hardsr rn F les the Pamatin ard model of vas hadaa Geron ard Fog h Hest IN pa havs dak bat contend Ha dosi pe mari bo imba eek Have Dok Modd Samsung sex Pa This driver r pent dig alle signed Tal ma veker dayan marina nos ar eget pers cano If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou are installing Ice this hadvare Samsung sara has nal pated Writes Logo bating lo wendy s compabbdiy wth Winar AP Dell me vat Des bagting be paiba Continuing your installation of this sofbware mag impair or destabilize the comect operation of your system eather immediately or m the future Mrorosoft sbrongig recommends thal pou rop this installation now and eomact the hardware vendor for software that has passed Windows Logo testing Continue Argway STOP Inetallstion Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepa
70. ice eg sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCR s or camcorders as well as your computer can be con nected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Note You can connect USB devices such as a mouse or keyboard Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button GN SAMSUNG monitor installer Select the display sdapster on Which you vert lo intel te monilis EDH 9520 Flug and Pim Mori Sele the mordar ahich you wari bo install 4 Ifyou can see following message window then click the Continue An
71. ies button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue Using the Software Sorter refresh rate CT san df Hede moden hal Pri Sonet OL aan Dinamo Fu check ba ig vin So jarler diplay maga Fat Hin manna dannet Saging comert y Thee mag kar ba an uel lap and or damage hargas p Continue Cancel User Account Control helps stop unauthorized changes to your computer Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Dena PT Ti Fra DE AnG preety i Ta waa ntb cui Shay Siver ba To upis a Greer pie Sor i daa e drvca Kai fer opii ap ar ral ach Sah previa raae e hasina pa minini dica Ta umiral Fa dia Aro Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer je Hoey Oo you ward 10 Hah koa der r s0fbmanet Brava Bor drevet pane Gn EDIT GT dart V r deere apan n Fax aan Dearth gutomatcally lee opdadpd draer piihin Kirakan andl pepe gaan Elben deve fe fer Lele fro nara Fes pra dryers F petal mekke Li tal ea e aaa La ere peek bom fit of Geeks drani on My c
72. in electric shock or fire L Install the antenna far away from any high voltage cables e Ifthe antenna touches or falls onto a high voltage cable it may result ENG in electric shock or fire L Ensure that the packaging vinyl is kept away from children gt e Otherwise it may result in serious harm suffocation if children play O XY withit L If the height of your LCD Display is adjustable do not place any object or part of your body on the stand when lowering it d e This may cause damage to the product or the person carrying it Clean ff When cleaning the LCD Display case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric L Do not spray cleaner directly onto the surface of the product N Pa e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off Others Safety Instructions L Clean the product using a soft cloth with a LCD Display cleaner only If you must use a cleaner other than the LCD Display cleaner dilute it with water at a ratio of 1 10 L When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire L When cleaning the product disconnect the power cord and clean it softly with a dry cloth
73. ing the LCD Display fr gt ENTER Sets how many parts the screen should be divided vertically Five adjustment levels 1 2 3 4 and 5 Screen Divider MENU yr or ENTER Setup 0 ro Fo T ENTER Video Wall ENTER Screen Divider The screen can be divided into several images A number of screens can be selected with a different layout when dividing e Select a mode in Screen Divider e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode Safety Screen Le E35 45 The Safety Screen function is used to prevent afterimages that may appear when a still picture 1s displayed on the screen over a long time e The Screen Scroll function scrolls the screen for the specified period of time e This function is not available when the power is turned off MENU or or ENTER Setup 0 T T ENTER Safety Screen Pixel Shift Pixel Shift MENU 74 54 54 ENTER Setup 0 T T ENTER Safety Screen ENTER Pixel Shift gt ENTER Pixel Shift a gt ENTER To prevent after images on the screen you can use this function so that every minute pixels on the PDP are moved in horizontal or vertical direction Adjusting the LCD Display 1 Off 2 On Horizontal Dot MENU or or
74. ing the LCD Display Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Picture AV HDMI TV Mode Available Modes lpc DvI Elav HDMI M MagicInfo TV Mode MENU gt ENTER Picture gt ENTER Mode Standard rf gt ENTER The LCD Display has four automatic picture settings Dynamic Standard Movie and Cus tom that are preset at the factory Dynamic Standard Movie or Custom can be activated Not available in Dynamic Contrast mode of On 1 Dynamic 2 Standard 3 Movie 4 Custom J Note The direct button on the remote control is the P MODE button Custom LU By using the on screen menus the contrast and brightness can be changed to your personal preference MENU ENTER Picture gt ENTER Custom Adjusting the LCD Display Not available in Dynamic Contrast mode of On Contrast MENU ENTER Picture gt ENTER Custom ENTER Contrast Contrast al ENTER Adjusts the Contrast Brightness MENU ENTER Picture Y gt ENTER Custom gt ENTER Brightness Brightness 4 er ENTER Adjusts the Brightness Sharpness MENU ENTER Picture gt ENTER Custom ENTER Sharp ness 3h Sh
75. justing the LCD Display Preview e D MENU or r r Digital Menu ENTER F Digital Channel ENTER ov Edit Favourite Channels ENTER BEC TWO BBC THREE abe Add Renumber Preview Delete Press the yellow button The selected channel is displayed on the screen Delete e D MENU or r r Digital Menu ENTER TY Digital Channel ENTER ov Edit Favourite Channels ENTER a I T BBC TWO BBC THREE Remember Preview Delete Press the blue button Note e The selected channel and number will be deleted To add a deleted channel back in to the favourite channel list Channel List D MENU r r Digital Menu ENTER F Digital Channel gt ENTER of Channel List ENTER Channel List All Channels All W 0056 amp widalt6b 15 Chis 6 QW i 17 UKTY Gold oo texi Holidays B00 ARO MHP Data More Favourites Previous Page Next Page Le vaten id Return You can exclude the channels you have chosen from the channels you have scanned When you scan through the stored channels those you have chosen to skip are not displayed All channels that you do not specifically choose to skip are displayed during scanning Note e Your favourite channels are only displayed if they were previously set in the Editing Your Fa vourite Channels menu Adjusting the LCD Display e The chan
76. l Control TY gt ENTER G Gain ENTER 4 ENTER 3 B Gain MENU 7 ENTER Picture 0 gt gt ENTER Signal Bal ance gt ENTER Signal Control gt ENTER B Gain ENTER B Gain af ENTER 4 R Offset MENU 7 ENTER Picture 0 gt of ENTER Signal Bal ance gt ENTER Signal Control gt gt ENTER R Offset ENTER R Offset OOS Move Size LJ Adjusting the LCD Display at ENTER G Offset MENU ENTER Picture 0 gt of ENTER Signal Bal ance gt ENTER Signal Control gt gt gt ENTER G Offset ENTER G Offset S Move 4 Adj 4 ENTER B Offset MENU ENTER Picture gt gt or ENTER Signal Bal ance gt ENTER Signal Control T ENTER B Offset ENTER att ENTER MENU ENTER Picture 9 5 or or ENTER Size F gt ENTER The Size can be switched 16 9 4 3 Dynamic Contrast LAY MENU r ENTER Picture T gt YY F gt ENTER Dynamic Contrast Y gt ENTER Adjust
77. l List menu TV channels provide written information services via teletext Teletext Buttons 00 0ga 06 0 08 He e I a a Ba For more information gt TTX MIX Press the button once to freeze the screen Press it again to un freeze Adjusts the screen display automatically in PC mode By changing the resolution in the control panel auto function is performed When pressing this button the current mode is displayed at the bottom centre of the screen The LCD Display has a built in high fidelity stereo amplifier Then press the button again to circle through available preconfigured modes Standard Music Movie Speech Custom MDC Quick Launch Button Activates or deactivates all function keys on both the remote con trol and the LCD Display except for the Power and LOCK buttons Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time This button is used to return to the immediately previous channel In TV mode selects TV channels DTV menu display Electronic Program Guide EPG display Returns to the previous menu 24 Up Down Left Right but tons 25 7 Ul EXIT 26 0 srs 27 MagicInfo 28 P MODE 29 Hl DUAL MTS 30 PIP 31 SWAP Introduction Moves from one menu item to another horizontally vertically or adjusts selected menu values Exits from the menu screen Not
78. le PC 4 Turn off your LCD Display and reconnect the video cable then turn on both your computer and the LCD Display If your LCD Display screen remains blank after using the previous procedure check your video con troller and computer system your LCD Display is functioning properly Warning Messages You can even view the screen at a resolution of 1360 1920 x 768 1080 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time And 1f the resolution 1s more than 85Hz you will see the black screen because the LCD Display does not support over 85Hz Not Optimum Mode Recommended Mode AREAS Kr GOH Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting e Do not use benzene thinner or other flammable substan ces or a wet cloth e Werecommend that a SAMSUNG cleansing agent is used to prevent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner LL lsg They may cause flaws or deformation of the screen sur face e The user will be required to pay costs and related expenses for repairing damage
79. lors Not available in Dynamic Contrast mode of On Note This function is only enabled if the Color Tone is set to Off Image Lock Lid Coarse Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Available in PC mode only MENU ENTER Picture gt or ENTER Image Lock MENU ENTER Picture gt or or ENTER Image Lock gt ENTER Coarse 4 er ENTER Adjusting the LCD Display Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Fine MENU ENTER Picture 0 or ENTER Image Lock T ENTER Fine all er ENTER Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed H Position MENU ENTER Picture gt or or ENTER Image Lock ENTER H Position 4 er ENTER Adjusts the screen location horizontally V Position MENU 7 ENTER Picture or ENTER Image Lock 0 T ENTER V Position af
80. ls Therefore a digital TV 1s required to watch digital TV broadcasting Can I use my present antenna to receive digital broadcasting As for existing analog TV digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas A Ifsignal reception is very good in your environment you can watch digital broadcasts with your existing indoor antenna If not it is better to install an outdoor UHF antenna How do I connect an antenna for an apartment or tenement house Consult the superintendent s office or broadcasting facility administrator for your apartment or tenement house to check whether UHF reception is available A Even if digital TV broadcasting is available in your area if you cannot watch it because the superintendent s office or common broadcasting facility does not rebroadcast the signal you have to install an indoor or outdoor antenna A Alternatively your local cable broadcasting company provides a digital TV service and you can subscribe to it A Ifa cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility Note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance pl
81. n be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings In most cases the LCD Display installation will proceed auto matically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with preci sion of lppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 133 440 Note Design and specifications are subject to change without prior notice yf Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment Magiclnfo Client Item Specification Remarks LAN 1 Gbps USB Keyboard Mouse Mass Stor USB removable storage can be age Device Compatible supported Contents Photo Supported File Format BMP 2274x1704 or less JPEG Music Supported File Format MP3 Sound bandwidth 50 Hz to 15 kHz Movie MPEG1 WMV Max 1280 x 720
82. nel number name and an icon are displayed in the top left corner while changing the channel e The channel number and name are displayed if the channel is one of the all channels and a icon if the channel is one of the favourite channels Setup Menu Transparency D MENU r r r Digital Menu gt ENTER T Setup ENTER Menu Trans parency gt ENTER Change PIN Parental Lock Subtitle Sutitle Meade Move r gt ENTER You can set the translucency of the menu 1 High 2 Medium 3 Low 4 Opaque Change PIN D MENU r r Digital Menu ENTER T r Setup ENTER Change PIN ENTER Confirm New PIN Your PIN code has been changed successfully 0 0 9 gt 0 0 9 0 5 9 gt ENTER The Your PIN code has been changed successfully message is displayed Note e Ifyou forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER Off MUTE 8 2 4 POWER On Parental Lock D MENU r r Digital Menu gt ENTER Setup gt ENTER gt T Parental Lock ENTER 0 O 9 gt ENTER Adjusting the LCD Display Parental Lock pa ENTER This feature allows you to prevent unauthorized users such as children from watching unsuitable programmes by a 4 digit P
83. ng com http www samsung com http www samsung com hk http www samsung com http www samsung com http www samsung com jp http www samsung com my http www samsung com nz 1800 10 SAMSUNG 726 7864 http www samsung com ph 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 http www samsung com http www samsung com Terms Appendix Asia Pacific TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com Middle East amp Africa SOUTH AFRICA 0860 SAMSUNG 726 7864 __ http www samsung com TURKEY 44477 11 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com 8000 4726 Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance be tween two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution Satellite Broadcasting Cable TV create and display an image for the user The frequency of this repetition per second 1s called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle Th
84. nna cable sold separately as the antenna cable ros OUT O Lan LAN Connection Terminal B USB USB Connection Terminal Keyboard Mouse Mass Storage Device Com patible Note The number of LCD Displays that can be con nected to loopout may differ depending on the cables signal source etc With cables where there is no degradation or signal source up to ten LCD Displays can be connected Introduction Kensington Lock The Kensington Lock is a device used to physi cally fix the system when using it in a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be dif ferent depending on its model Using the Anti Theft Kensington Lock I Insert the locking device into the Kensington slot on the LCD Display O and turn it in the locking direction Q 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object Note See Connecting Cables for further information regarding cable connections Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with
85. o see the full image without any cutoff when HDMI 720p 10801 1080p DTV 10801 signals are input Note Auto Wide function is available only in TV DTV AV mode In PC Mode only 16 9 and 4 3 mode can be adjusted Screen Mode D MENU Picture gt ENTER gt ENTER Auto Wide Wide Zoom r gt ENTER Only when setting the picture size to Auto Wide can the user determine the Screen mode Each individual European country requires a different picture size so this function is intended to help users to select it Screen mode is supported in TV Ext Component 4801 10801 and HDMI 4801 10801 Picture Size is available in Auto Wide mode This function is not available in PC or Component Ext HDMI mode l 2 3 4 Channeli Country 16 9 Wide Zoom Loom 4 3 D MENU r Channel ENTER ENTER Country Adjusting the LCD Display Channel Auto Store Switzerland Manual Store 7 7 i Austria Channel Manager Eastem Europe Sort Name w Moe Move ENTER Select the country in which the product is being used before you use the Auto Store feature If you do not see your country in the list select Others Auto Store D MENU Channel ENTER ov ENTER Auto Store Auto Store You can scan the frequency ranges available on your television in your area and store all the channels found automatically Manual Store
86. omputer Fan fied rd Chee orale disse Pee ogee alt Ver beer arad ul dier aga or er igar egy me draa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK 9 Microsoft Windows XP Operating System Using the Software Spiir the green drier ve ward o ball for tha hanhan aa Pa arch ree i Smal a Pale Pee na dr Pe chee Poel ps Bara i ie Pe deters Pai ree ping ed Vil th bien Cie trm aateiwten Haza jo Pl ria I Ta ose a h agree Select the deviar driver you want to inptall few this hardware mil pa rare rd aha pl par Pari sit ri Par Elin Pama Fy S re doll Fl sid Vai ae pi mil bi alal Hana ie Per ORY Karaang mus NN Samang oe Aiba h r subo Ad updsled your diet sofware S a mere biomi paing Screen refresh rate Sa Hertz Gf pode modes that the monitor cannot deplav Clarin than cheeck ben apa you ko select daplay modes that thig monaor Cannot display correctly This may lead to an unusable Select the model that matches your monitor from the list of monitor models on the screen and click Next Top am li plein Pei ein Vi Ti pink Pk ie eaa be a a ces taia aan dt a dere ad Dich ra Pa RA m Ti areata Pa dee Liria Drag the icons to match your monton Re i Thug ig my main maagor Fiptend the desktop onto the montor Ta a FEST PALPENES EE ENTEN TEGENE BESTE PEEL Using the Software 1 Insert CD into th
87. on power S W ON I OFF 0 Switches the LCD Display On Off O POWER IN The power cord plugs into the LCD Display and the wall plug O RS232C OUT IN RS232C Serial PORT MDC Multiple Display Control Program Port O DVI PC HDMIIN DVI PC HDMI AUDIO IN PC DVI HDMI Audio Connection Terminal Input O DVI PC HDMI IN HDMI Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your dig ital output device using a HDMI cable G DVI PC HDMI IN RGB PC Video Con nection Terminal Using a D Sub Cable 15 pin D Sub PC mode Analog PC pyi PC HDMIIN DVI PC Video Con nection Terminal Using a DVI Cable DVI D to DVI D DVI mode Digital PC KO 12 COMMON INTERFACE Gan ANTI QO 43 44 45 haa OUT GJE KN us R Introduction O V IN VIDEO VIDEO Connection Termi nal AV AUDIO IN L AUDIO R LCD Display Audio Connection Terminal Input 10 AUDIO OUT L AUDIO R LCD Display Audio Connection Terminal Output COMMON INTERFACE This contains information on CAM inserted in the CI slot and displays it When not inserting CI CARD in some channels Scramble Signal is displayed onthe screen You can install the CAM anytime whether the TV is ON or OFF OG ANT IN Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the LCD Display Make sure to use a TV ante
88. onnect a set of two cables Connecting Using a HDMI Cable Note Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using the HDMI cable Connections e You cannot connect a PC to the HDMI terminal Connecting Using a DVI to HDMI Cable Note e Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable e Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the HDMI PC DVI D AUDIO IN terminal of the LCD Display Connecting to an Audio System AUX Note e Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT L AUDIO R on LCD Display Connecting a LAN Cable sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCR s or camcorders as well as your computer can be con nected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connections if Note Connect the LAN cable Connecting a USB dev
89. ow Noise Amplifier English Caption Caption Set ting Multiplex Broadcasting A2 BTSC EIAJ DVI HDMI High Definition Multi media Interface Appendix ble network In order to view cable TV one must purchase a cable receiver and hook it up to the cable network CATV refers to the broadcasting service offered at hotels schools and other buildings through their own broadcasting sys tem apart from VHF or UHF broadcasting by terrestrial broad casters The CATV programs may include movies entertainment and educational programs Different from cable TV CATV can be viewed only within the area in which the CATV service is offered VHF indicates TV channels 2 to 13 and UHF indicates channels 14 through 69 This feature allows the viewer to fine tune the TV channel to ob tain the best viewing conditions The Samsung LCD TV has both automatic and manual channel fine tuning features to enable the viewer to adjust their desired settings A type of digital disk technology that takes up only the benefits of CD and LD to implement a high resolution quality which en ables the user to enjoy clearer images An enhanced broadcasting technology to process digital video signals using a set top box which implements a high resolution and clearer digital images on the screen This derives from artificial satellite technology that amplifies weak signals even in poor reception areas for sharper images A kind of langu
90. ow after setting other requested hardware Using the Software Installation Magiclnfo Pro Installation l p 3 4 Ji Insert CD into the CD ROM drive Click the MagicInfo Pro installation file When the Install Shield Wizard window appears click Next Welcome to the InstallShield Wizard for Magicinfo Pro The Install 5hield Wizard will install Magiclnto Pro on your computer To continue click Nest License Agreement Please read the following license agreement carefully END USER LICENSE AGREEMENT FOR SAMSUNG ELECTRONICS Magiclnfo SOFTWARE PRODUCT IMPORTANT RESAD CAREFULLY This Samsung Electronics End User License Agreement EULA is legal agreement between you ether an individual or single entity and Samsung Electronics Co Ltd SAMSUNG ELECTRONICS with respect to the SAMSUNG ELECTRONICS product identified above The SAMSUNG ELECTRONICS software product may include associated software components media printed materials and online ar electronic documentation SOFTWARE PRODUCT By installing copying or using the SOFTWARE PRODUCT vou agree to be bound by the terms of this EULA IF you do not agree to the berms of this EULA you C 11 do not accept the terme of the license agreement cs aco You are required to log in to the MagicInfo Pro Server program Please enter the password to login The password cannot be changed when you are logged in Using the Software M
91. pdate Driver and select Install from a list or then click Next button Flug ard log Monitor pope flass rales Hardware Update Wizard Welcome to the Hardware Update Wizard This wizard heip you install nawewe bor Pliny are Play Mordor 5 1 2001 0 Ang ng ira ia oi app disk ment il nine To sere akala aland Wee brei daa What de pou sert the varad lo do To update iha chives do ihis device ma CO Iniba the pola tatatak Recorded Bell Pack rever LIANG PAG eee ee pall CH asia ee To uena tio kines araro kek Mest lo contina ie 6 Select Don t search I will then click Next and then click Have disk Using the Software Hardware Update Wizard Fies chose pug poarch and indlallabon open D Seach ka the best dvs in Bese koster Le the chk Exon bak bo kai or apan the default search hoh rekudet boa pathi Seed eerie able ees The beit dress und ball be s laked Pont search vill choose the drva ba stall Choose this option ko pedi the devane dress homa bot Wirda does mot gusranbes hal ha rer pou chee ell ba Shs bagi match For pour hace Hardware Update Wizard Tekst the devine diver pou want be install Noa this hardware 7 Celso the marulectaer re model af pour hardware devas and then chek Hasi Il you hase dak that panang tha disas 04 sant bo Pakal check Hawa Diik res gommpatbla kanayang Montel Pag Phang ard Plage cara a Thi dri p gpl piril Talma wiu eet ped
92. players VCR s or camcorders as well as your computer can be con nected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connecting TV Note You may view television programs on the LCD Display if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer 1 Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the LCD Display Make sure to use a TV antenna cable sold separately as the antenna cable e When using an interior antenna terminal Check the antenna terminal on the wall first and connect the antenna cable Connections e When using an outdoor antenna If you are using an outdoor antenna use a professional for installation if possible e To connect the RF cable to the antenna input terminal Keep the copper wire portion of the RF cable straight 2 Turn on the LCD Display 3 Select TV using the TV DTV 4 Select a desired TV channel Note Is weak signal causing poor reception Purchase and install a signal amplifier for better reception Connecting COMMON INTERFACE P note You can install the CAM anytime whether the TV is ON or OFF Purchase the CI CAM module by visiting your nearest dealer or by phone 1 Insert the CI CARD into the CAM in the direction of the arrow until it fits 2 Insert the CAM wi
93. ply pressing the MagicBright control button Not available in Dynamic Contrast mode of On Adjusting the LCD Display 1 Entertain High brightness For watching motion pictures such as a DVD or VCD 2 Internet Medium brightness For working with a mixture of images such as texts and graphics 3 Text Normal brightness For documents or works involving heavy text 4 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu Custom By using the on screen menus the contrast and brightness can be changed to your personal preference MENU ENTER Picture gt ENTER Custom Not available in Dynamic Contrast mode of On Note By adjusting the picture using the Custom function MagicBright will change to Custom mode Contrast MENU ENTER Picture gt ENTER Custom ENTER Contrast Contrast 4 ENTER Adjusts the Contrast Brightness MENU ENTER Picture gt ENTER Custom gt ENTER Brightness 4 ENTER Adjusts the Brightness Sharpness MENU ENTER Picture gt ENTER Custom r ENTER Sharp ness Adjusting the LCD Display Sharpness all er ENTER Adjusts the Sharpness
94. r 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO Black Matrix Color Filter Data Gate ha TFT Pixel Electrode Storage Capacitor Bus Line ITO Cs Power Off Screen Saver or Power Save Mode e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Set the LCD Display to power off with the PC Display Properties Power Scheme e Usea Screen saver if possible Screen saver in one color or a moving image Is recom mended Change the Color Information periodically Type 1 FLIGHT Type 2 FLIGHT O2348 02348 UA102 UA102 Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes Information e Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey 02348 203 oe Change the characters color periodically e Use Bright colors with little difference in luminance
95. re gt ENTER Auto Store Scanning for digital sevices Services found 0 You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location Adjusting the LCD Display Note e Even though you have changed the country setting in this menu the country setting for Analog TV is not changed e When it has finished the number of scanned services will be displayed e The existing favourite channel list will not be deleted when the channel list is updated e To stop the scan before it has finished press the ENTER button with Stop selected e If the signal status is poor the No Service found Check the aerial connection message Is displayed Manual Store D MENU r r Digital Menu ENTER Digital Channel ENTER T gt T Manual Store ENTER tN Manual store Channel Frequency Bandwidth FE 177500 KHz T Search menka o a T gt ENTER You can specify the channel for a fast channel search e Channel Channel 5 to 69 in sequence are displayed depending on the country e Frequency The frequency available in the Channel group is displayed e Bandwidth The available bandwidths are 7 and 8 MHz Edit Favourite Channels D MENU r r Digital Menu ENTER F Digital Channel ENTER of Edit Favourite Channels gt ENTER a no Channels Add Channels BBC THREE abel
96. rk related information refer to the MagicInfo Troubleshooting section Problems related to the Installation Note Problems related to the LCD Display installation and their solutions are listed Troubleshooting PC Mode The LCD Display screen flickers Check if the signal cable between the computer and the LCD Display is securely connected Refer to Connecting a Computer TV Mode TV screen is blurred or shows noise signals Check if the TV antenna connector is securely connected to the external antenna Refer to Connecting TV TV signal is not received Select Auto Program to configure the channel system automatically Refer to the Auto Pro gram Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed Q A ng gt Q F F O pe o 2 2 PR The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable 1s firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable is securely connected Re conne
97. rwise this may result in electric shock or fire N F3 L When you drop the product or the case is broken turn the power off wy L If thunder or lightening is occurring do not touch the power cord or antenna cable NE Otherwise this may result in electric shock or fire L Do not try to move the LCD Display by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal tem perature L Do not place any containers containing water vases flowerpots med icines as well as any metal on the product e Ifwater or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L Do not use or keep combustible spray or flammable material near the W product e Otherwise this may result in an explosion or fire L Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper
98. s caused Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the LCD Display to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 50 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 Ifyou have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel System Device Administrator and then reboot the computer to reinstall the Adaptor video driver Check List Note e The following table lists possible problems and their solutions Before calling for assistance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer e For more netwo
99. t Safety Screen gt Pixel e Time Interval I 10 hours Recommend 1 e Time Period 10 50 second Recommend 50 e Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down mn FLIGHT TIME Horizontal Bar 04548 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Bar e Time Interval I 10 hours Recommend I e Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not available Apply the Screen Erasing function on Product e Apply the Screen Erasing function Symptom 2 Vertical blocks move with erasing the display Information TIME OZ348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Eraser e Time Interval I 10 hours Recommend I e Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not available Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA TRINIDAD amp TO BAGO VENEZUELA AUSTRIA
100. t to On Digital Text D MENU r r Digital Menu gt ENTER Setup ENTER or gt gt gt FT oF Digital Text gt ENTER Audio Format Audio Description Time Zone Ena Common Interface Tr r gt ENTER If the programme is broadcast with digital text this feature is enabled 1 Disable 2 Enable Note e MHEG Multimedia and Hypermedia Information Coding Experts Group An International stand ard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV In teractive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games Time Zone FF Note e Spain only D MENU r r Digital Menu ENTER Setup ENTER or gt gt YY T T Time Zone gt ENTER DTV Time Zone Canarian Islands r gt ENTER Select the time zone where locate Adjusting the LCD Display Note e The following options are available The Iberian Peninsula and Balears Islands Canarian Islands Common Interface D MENU Digital Menu ENTER
101. th the CI CARD installed into the common interface slot Insert the CAM in the direction of the arrow right up to the end so that it is parallel with the slot 3 Check if you can see a picture on a scrambled signal channel Connecting AV Devices 2 3 The Connections Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the LCD Display Then start the DVD VCR or Camcorders with a DVD disc or tape inserted Select AV using the SOURCE Note LCD Display has AV connection terminals to connect AV input devices like DVDs VCRs or Camcorders You may enjoy AV signals as long as the LCD Display is turned on Connecting to a Camcorder 4 The x aes za p A P3 k EE IE WS OUTPUT AUDIO VIDEO O Locate the A V output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN L AUDIO R on the LCD Display Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the LCD Display Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control Then start the Camcorders with a tape inserted Note audio video cables shown here are usually included with a Camcorder If not check your local electronics store If your camcorder is stereo you need to c
102. the AC power in advance Note AV input devices such as DVD players VCR s or camcorders as well as your computer can be con nected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connect the power cord for your LCD Display to the power port on the back of the LCD Display Trun on the power switch There are 2 ways to connect the D sub to your LCD Display Choose one of the following Using the D sub Analog connector on the video card e Connect the D sub to the 15 pin RGB port on the back of your LCD Display and the 15 pin D sub Port on the computer Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI HDCP port on the back of your LCD Display and the DVI port on the computer Connections Connect the audio cable for your LCD Display to the audio port on the back of your computer Note e Turn on both your computer and the LCD Display e The DVI cable is optional e Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD
103. the properties of the original file as they are Interval a athe 4 aaa NO nit 7 MG j a5 TF pl L i S 7 P y ia a Pi y Device bet alfa Mayiu Office HTML Controls the time intervals between image files for a slide show 5 Sec 10 Sec 20 Sec 30 Sec 60 Sec Adjusting the LCD Display Rotation a nil Meg Davior infernei e 0 0 0 0 0 Mile Maia Offiea I HTML Displays an image file by turning it clockwise by 90 degrees Zoom OOOO 00000 Mia Offiea I HTML of 0 gt 0 Displays a reduced picture Adjusting the LCD Display Close o O O Mural Offic HTML Closes the image control Menu Music 1 Music na Office HTML The MP3 file format is supported Movie The MPEG1 WMV file format are supported Adjusting the LCD Display Play Internet O O Pate Plays a movie file Full Size agi A B a Intern Cdo 00 00 010000 Do Phata eee z rm l l Se e e FT Jet LEV CLL oy et LS ne Eee Plays a movie file in full screen Adjusting the LCD Display OFFICE HTML 1 o O a 0000 Office HTML PPT Power Point DOC MS Word XLS MS Excel PDF HTML HTM files are displayed Gi Note e Install the proper viewer freeware program to see the MS Office Word Excel Power Point or PDF doucuments Internet Pablo a HTML Connec
104. the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED 1s on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 General Display Mode VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 848 x 480 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 768 VESA 1280 X 960 VESA 1280 X 1024 VESA 1280 X 1024 VESA 1360 x 768 VESA 1600 x 1200 VESA 1920 x 1080 A is la 9 a uer r Ta P y Specifications Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MH2 H V kHz 37 500 75 000 31 500 35 156 56 250 36 000 FI 37 879 60 317 40 000 FF 48 077 72 188 50 000 46 875 75 000 49 500 LT 31 020 60 000 33 750 FI 48 363 60 004 65 000 56 476 70 069 75 000 60 023 75 029 78 750 67 500 75 000 108 000 HT 47 776 59 870 79 500 60 000 60 000 108 000
105. tions L Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily op erable e This may cause electric shock or fire L Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Installation Be sure to contact an authorized Service Center when installing your LCD Dis play in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your LCD Display w Q L Ensure that at least two persons lift and move the product IN 9 e Otherwise it may be dropped and cause personal injury and or dam 3 age the product O L When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out mi Otherwise it may fall or cause p
106. ts to the Internet Setup Sets various functions in MagicInfo mode A password must be entered to access Setup mode Adjusting the LCD Display Schedule View Misie Displays a schedule TCP IP gt HD AA ka 1 Device 0 0 0 0 0 Music Mayin 8 a ice HTML Changes the TCP IP settings Adjusting the LCD Display Connection interna 2 5 O Oo oo Office i HTML Modifies the network settings Password 05 00 60 The password can be changed e The password should be between 6 and 12 characters in numeric format You should enter a password between 6 and 12 characters in numeric format If you enter the wrong password three times the setup configuration is reset and a warning message appears from the server Adjusting the LCD Display e Ifyou forget the password enter Info 8 2 and 4 on the remote control to initialize the password This will reset the previous settings of Setup mode File Na interme 5 3 6 O Office I HTML pene Haha i aa Local You can delete or copy files on both local and removable disks Play Option Often I HTML You can set the repeat play and screen settings Repeat Determines the repeat option for playing movies and music e None Select No Repeat to play a movie or tune in the list only once Adjusting the LCD Display e File Repeat Select Repeat File to play a movie or tune in the list repeatedly e List Repeat
107. uage Primary Teletext Language l 2 gt 4 5 Note Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language If you change the language setting the Subtitle Language Audio Language and the Teletext Lan guage of the Language menu are automatically changed to the selected language The Subtitle Language Audio Language and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted If you change this language setting the new selection is only valid for the current channel The changed setting does not change the setting of the Primary Subtitle Language Primary Audio Language or the Primary Teletext Language of the Preference menu Troubleshooting Self Test Feature Check A note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below Check Signal Cable appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen IP Check Signal Cab
108. us information services in your home creating a more information oriented home What is the difference between HDTV and SDTV There are various types of digital TVs The most widely known types of digital TV are HDTV and SDTV They are classified according to the screen quality and the video specifications e HDTV High Definition TV High screen quality very clear TV e SDTV Standard Definition TV Common standard digital TV Troubleshooting A An SDTV has an aspect ratio of 4 3 which is the same as that of an analog TV HDTV has an aspect ratio of 16 9 which is similar to a cinema screen This provides a much better screen quality than SDTV It s like having a theater in your home A Digital TV broadcasting in our country is ultimately orientated towards HDTV Can I watch HD broadcasting with all digital TVs You can receive all digital broadcasts whether they are SD or HD using any digital TV How ever you cannot enjoy HD programs which are the highest quality digital TV programs using an SD digital TV Especially as SD broadcasting has an aspect ratio of 4 3 HD broadcasting has an aspect ratio of 16 9 similar to a cinema screen Therefore to enjoy the full benefits of digital TV it is better to purchase an HD digital TV At present all digital TVs from Samsung Electronics have the 16 9 wide aspect ratio Can I watch digital TV broadcasting with an analog TV No The analog TV cannot interpret digital signa
109. usting the LCD Display Off Available Modes CJ PC DVI EJ Av C HDMI M MagicInfo li TV Mode MENU gt 7 57 ENTER gt Sound gt ENTER Mode rf gt ENTER The LCD Display has a built in high fidelity stereo amplifier Standard Selects Standard for the standard factory settings Music Selects Music when watching music videos or concerts Movie Selects Movie when viewing movies Speech Selects Speech when watching a show that is mostly dialogue 1 e news Custom Selects Custom if you want to adjust the settings according to your personal preferences Custom ba II The sound settings can be adjusted to suit your personal preferences MENU 5 57 5 ENTER Sound ENTER Custom Bass Treble Balance Adjusting the LCD Display Note e You can hear the sound even when sound value is set to 0 e Ifyou adjust sound using Custom function Mode will turn to Custom mode MENU r ENTER Sound ENTER Custom gt ENTER Bass 4 ENTER Emphasizes low frequency audio MENU r ENTER Sound ENTER Custom ENTER Treble Treble 4 ENTER Emphasizes high frequency audio MENU ENTER Sound ENTER Custom ENTER Bal ance Balance all er ENTER Allows you to Adjusts the soun
110. yway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software pou ane installing for this hardere Samsung 44 har not passed Windows Logo testing to wenly ite compahbdiy with Windows XP Tell me why thes besteg is important Continuing your installation of this software may impair or destabilize the comeci operation of your system either immediately of in the future Microsoft strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Colina rgang Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click GA Start and Control Panel Then double click on Appearance and Personalization 3 ee Se ee SS ee es mn rr Den TERS aa EEE NG oe ee ey Ka maang he OC her iem ee Se ee ee KE Lie le Nang rd ink ge Ba es ing Bil om Veng Fan rv mn uer seer bg a rae 4 Soro Dang Pr kr ba makeh pour eer i laiph Meniters on PHEA Gefore DOG LE fe nents Corp tor Coige 5 Click Properties in the Monitor tab If the Propert

Download Pdf Manuals

Related Search

Related Contents

クリック  Targus Versavu  Sweex Notebook Optical Mouse Snakefruit Brown USB  Vistanaut - Maritimer Shop  HIMAX C 3516-0840 C 3516-1130 C 3516-1350 Anleitung  東北脊梁山地合同地震観測における衛星通信測システムについて  6531 Manual  URINAL CISTERNS TROUBLESHOOTING  USER MANUAL  Wiley Master VISUALLY Excel 2007  

Copyright © All rights reserved. Failed to retrieve file