Home

Samsung 320MP 32" HD-Ready Black LCD TV

1. gt ENTER Video Wall gt 4 5 Y ENTER Screen Divider The screen can be divided into several images A number of screens can be selected with a different layout when dividing e Select a mode in Screen Divider e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture 1s displayed on the screen over a long time e The Safety Screen function scrolls the screen for the specified period of time e This function is not available when the power is turned off MENU gt gt ENTER Setup gt gt Yo gt Yo gt ENTER gt Safety Screen Pixel Shift Pixel Shift MENU gt 4 5 ENTER Setup 5 gt Yo gt gt gt ENTER gt Safety Screen ENTER Pixel Shift ENTER Pixel Shift gt ENTER To prevent after images on the screen you can use this function so that every minute pixels on the LCD are moved in horizontal or vertical direction 1 Off 2 On Adjusting the LCD Display Horizontal Dot MENU gt 4 5 ENTER Setup gt gt YS gt gt gt gt ENTER gt Safety Screen gt ENTER Pixel Shift y ENTER Horizontal Dot a
2. Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Settings Control is available only for the displays for which the power status is ON lt Maintenance Ww Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen es Multiple Display Control File Remocon Safety Lock Port Selection Help Select AN Clear Al Apply O Manual Lamp Control D An Info Grid showing several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control 3 Manual Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control The Maintenance Control feature is available only for the displays whose power st
3. Double 3 990900 Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display and changes the size to Large 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Double 2 7 Double 3 Picture By Picture Turns on the PBP of the selected display and changes the size to Double 3 The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model PIP Size can be controlled with turning on the LCD Display power N PIP PIP Source 1 Click PIP of the main icons and the PIP control screen appears Multiple Display Control File Remocon Safety Lock Port Selection Help Select All PIP Source O All Inputs S Video 6 Component HDMI 8 Ye Info Grid shows some basic information necessary to PIP Source Control 1 PIP Source PIP Source can be controlled with turning on the LCD Display power PC Changes the source of the PIP of the selected display to PC BNC Changes the source of the PIP of the selected display to BNC DVI Changes the source of the PIP of t
4. ENTER R Offset G Offset MENU ENTER Picture ENTER Signal Bal ance gt ENTER Signal Control gt gt gt ENTER G Offset 4 p ENTER Adjusting the LCD Display G Offset 6 B Offset MENU ENTER Picture ENTER Signal Bal ance gt ENTER Signal Control 0 ENTER B Offset 4 ENTER Size MENU ENTER Picture 5 gt 5 ENTER Size ENTER The Size can be switched 1 16 9 2 4 3 Dynamic Contrast L4 MENU 7 5 ENTER Picture Yo 7 5 ENTER Dynamic Contrast Move Enter O Return yr gt ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Adjusting the LCD Display Picture AV HDMI Component Mode Available Modes e JPC BNC DVI Eav gt HDMI X Component Note e The TV menu is available when a TV tuner box is installed e The MagicInfo menu is available when a network box is installed Mode MENU ENTER Picture ENTER Mode gt ENTER Standard Movie Custom v Dynam mamic The LCD Dis
5. Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install 10 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel Ifthe Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System l 2 3 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button 10 11 Using the Software
6. Information in this document is subject to change without notice Appendix 2009 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or con sequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Win dows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are reg istered trademarks of the U S Environmental Protection Agency EPA All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners SRS TruSurround XT SRS and Symbol are trademarks of SRS Labs Inc TruSurround XT technology is incorporated under license from SRS Labs Inc
7. gt F gt ENTER Setup 07 gt gt gt F F F ENTER Side Gray gt ENTER Adjust Enter Return Select the brightness of the grey for the screen background 1 Off 2 Light 3 Dark Reset Reverts the product settings to factory defaults The Reset function is only available when PC DVI is being used MENU gt gt ENTER Setup 0 gt gt F F F ENTER Reset Image Reset Lid MENU gt ENTER Setup 0 TT gt gt F F F F ENTER Reset ENTER Image Reset 4 ENTER Maa akapa D Cancel Move 4 Adjust Retum Note Available in PC mode only Adjusting the LCD Display E Note The Reset function is not available when Video Wall is On Color Reset MENU gt gt ENTER Setup gt gt gt F F F F ENTER Reset ENTER Color Reset 4 ENTER Color Reset OSD Rotation MENU gt ENTER Setup gt TF gt TF gt FF gt F gt F gt F gt F TF gt To gt ENTER OSD Rotation pk gt ENTER OSD Rotate 1 Landscape 2 Portrait Lamp Control MENU gt ENTER Setup gt gt gt F F F F gt ENTER Lam
8. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property damage Make sure to read the instructions carefully and use the product in the correct manner EE Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment O Notational Conventions Q Prohibited Q Do not disassemble Q Do not touch Important to read and under stand at all times Disconnect the plug from the outlet Ground to prevent an electric shock N When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L Do not use a damaged power cord or plug or a damaged or loose power outlet e Otherwise this may result in electric shock or fire L Do not touch the power plug with wet hands when removing or plug X a h ging the plug into the outlet Gin Gb 17 e Otherwise this may result in electric shock L Make sure to connect the power cord to a grounded power outlet PN e Otherwise it may result in electric shock or personal injury L Ensure that the power plug is plugged into the power outlet firmly and correctly e Otherwise this may result in fire Safety Instructions L Do
9. www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin 0810 SAMSUNG 7267864 http www samsung com at 0 07 min 02 201 2418 http www samsung com be Dutch http www samsung com be fr French 800 SAMSUNG 800 726786 http www samsung com cz Distributor pro Ceskou republiku samsung Zrt Ceska organiza n slo ka Oasis Florenc 5okolovska3941 7 150 00 Praha 8 8 SAMSUNG 7267864 0818 717 100 30 6227 515 http www samsung com dk http www samsung com ie http www samsung com fi FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN AUSTRALIA CHINA INDIA INDONESIA JAPAN Appendix Europe 01 4863 0000 http www samsung com fr 01805 SAMSUNG 7267864 http www samsung de 0 14 Min 06 80 SAMSUNG 726 7864 800 SAMSUNG 726 7864 02 261 03 710 0900 SAMSUNG 0900 7267864 0 10 Min 3 SAMSUNG 7267864 0 801 ISAMSUNG 172678 022 607 93 33 808 20 SAMSUNG 7267864 0800 SAMSUNG 726 7864 http www samsung com hu http www samsu
10. 1 Standard Selects Standard for the standard factory settings 2 Music Adjusting the LCD Display Selects Music when watching music videos or concerts 3 Movie Selects Movie when viewing movies 4 Speech Selects Speech when watching a show that is mostly dialogue 1 e news 5 Custom Selects Custom if you want to adjust the settings according to your personal preferences Custom 0 8 The sound settings can be adjusted to suit your personal preferences MENU 7 5 4 5 ENTER Sound ENTER Custom Note e You can hear the sound even when sound value is set to 0 e Ifyou adjust sound using Custom function Mode will turn to Custom mode Bass MENU 4 5 ENTER Sound ENTER Custom ENTER Bass 4 ENTER 2 50 Emphasizes low frequency audio Treble MENU 57 5 ENTER Sound ENTER Custom gt ENTER Treble 41 1 5 ENTER Treble 50 Emphasizes high frequency audio Balance MENU ENTER Sound gt ENTER Custom gt gt ENTER Balance ENTER Balance L 50 LE R 50 Allows you to Adjusts the sound balance between the left and right speakers Auto Volume 2 S MENU gt gt ENTER Sound 1 5 gt ENTER Auto Volume gt ENTER Adjusting the LCD Display Reduces the d
11. 1 800 10 SAMSUNG 726 7864 http www samsung com ph 1 800 3 SAMSUNG 726 7864 02 5805777 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 0800 329 999 I 800 588 889 http www samsung com sg http www samsung com th http www samsung com tw http www samsung com vn Middle East amp Africa 0860 SAMSUNG 726 7864 444 77 11 800 SAMSUNG 726 7864 8000 4726 and Non Interlace http www samsung com za http www samsung com tr http www samsung com ae The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance be tween two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second 1s called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The in verse number of the Horizontal Cycle is called Horizontal Fre quency Unit kHz Showing the horizontal lines of the screen from the top to the bot tom sequentially is called the Non Interlace method while show ing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the
12. ENTER Image Lock ENTER Coarse 4 ENTER Adjusting the LCD Display Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Fine MENU ENTER Picture gt ENTER Image Lock gt ENTER Fine 4 ENTER Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed H Position MENU ENTER Picture 5 gt 9 5 gt ENTER Image Lock Y ENTER H Position ENTER H Position C U Adjusts the screen location horizontally V Position MENU ENTER Picture gt gt gt ENTER Image Lock gt gt ENTER V Position 4 ENTER V Position L N Adjusts the screen location vertically Auto Adjustment Li MENU ENTER Picture gt gt ENTER Auto Adjustment Auto Adjustment ee 7 30 The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Available in PC mode only Note The direct button on the remote control is the AUTO button Signal Balance Lil This is used to make up for th
13. Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time This button is used to return to the immediately previous channel In TV mode selects TV channels DTV menu display Electronic Program Guide EPG display Returns to the previous menu 24 Up Down Left Right but tons 25 7 ll EXIT 26 0 srs 27 MagicInfo 28 P MODE 29 Hl DUAL MTS 30 PIP 31 SWAP Mechanical Layout Mechanical Layout Introduction Moves from one menu item to another horizontally vertically or adjusts selected menu values Exits from the menu screen Selects SRS TruSurround XT mode MagicInfo Quick Launch Button When you press this button current picture mode is displayed on the lower center of the screen AV HDMI TV P MODE The LCD Display has four automatic picture settings that are pre set at the factory Then push button again to circle through avail able preconfigured modes Dynamic Standard Movie Custom PC DVI MagicInfo M B MagicBright MagicBright is a feature providing the optimum viewing envi ronment depending on the contents of the image you are watching Then push button again to circle through available preconfigured modes Entertain Internet Text Custom DUAL STEREO MONO DUAL I DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasti
14. Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dia logue box Microsoft Windows NT Operating System l 2 Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file l 2 10 Press Enter at the first and the second screen after executing the X86Config file The
15. Setup 5 gt ENTER Safety Lock PIN 0 9 0 9 0 9 0 9 0 0 Adjust Enter OF The password can be changed Energy Saving MENU gt ENTER Setup 5 gt ENTER Energy Saving gt ENTER This feature adjusts the power consumption of the unit in order to save energy 1 Off Adjusting the LCD Display 2 On HDMI Black Level L MENU gt 7 5 ENTER Setup gt ENTER HDMI Black Level gt gt ENTER When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low Video Wall A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each screen When the Video Wall is on you can adjust the Video Wall screen setting MENU gt ENTER Setup gt gt gt gt gt ENTER Video Wall Note When Video Wall is running the Auto Adjustment Image Lock and Size functions are not available Video Wall does not operate in Ma
16. that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately L When replacing the battery insert it with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid L Use only the specified standardized batteries and do not use a new battery and a used battery at the same time e Otherwise the batteries may be damaged or cause fire personal in jury or damage due to a leakage of the internal liquid L The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater e This may reduce the lifetime of the product and may result in fire Cl 6 J D
17. Cont Safety Lock Port Selection Help Select Alt Clear Alt All Inputs 60 AA r 3 Treble Al a Her nor O Balance ZZ se O SRS TS XT ON iain me a Oo ry m Bi Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Audio Controls audio settings for all input sources 2 Bass Adjusts Bass of the selected display 3 Treble Adjusts Treble of the selected display 4 Balance Adjusts Balance of the selected display 5 SRS TS XT SRS TS XT Sound ON OFF of the selected display 6 Sound Select Select either Main or Sub when PIP is On The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed I p Settings Image Lock 1 Click Settings of the main icons and the Settings Control screen appears fr Multiple Display Control File Remocon Safety Lock Port Selection Help Select Al Clear All De ED BEE Auto Adjustment
18. LCD Display If your LCD Display screen remains blank after using the previous procedure check your video con troller and computer system your LCD Display is functioning properly Warning Messages You can even view the screen at a resolution of 1360 x 768 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time And if the resolution is more than 85Hz you will see the black screen because the LCD Display does not support over 85Hz Not Optimum Mode Recommended Mode AREAS Kr GOH Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting e Do not use benzene thinner or other flammable substan ces or a wet cloth fr e Werecommend that a SAMSUNG cleansing agent is used to prevent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner Fr Na a Pr They may cause flaws or deformation of the screen sur face e The user will be required to pay costs and related expenses for repairing damages caused Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the
19. audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q A A The remote control buttons do not respond Check the polarities of the batteries Check if the batteries are empty Q amp A Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity How can I change the frequency The frequency can be changed by reconfiguring the video card Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I Adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can I set the Power Saving function Wind
20. displays connected the settings values are displayed as follows 1 2 3 No selection Displays the Factory Default Value Selected one display Fetches and displays the settings value for the selected display Selected one display ID1 and add another display 1D3 The program which was displaying the settings value of ID 1 fetches and displays the value of D3 Selected all sets using Select All Returns to the Factory Default Value Copyright 2003 2009 Samsung Electronics Co Ltd All rights reserved Adjusting the LCD Display Input Available Modes J PC BNC DVI gt Elav HDMI 4 Component Note The TV menu is available when a TV tuner box is installed e The MagicInfo menu is available when a network box is installed Source List Lid i MENU ENTER Input ENTER Source List a gt ENTER Use to select PC DVI or other external input sources connected to the LCD Display Use to select the screen of your choice l PC 2 DVI 3 AV 4 HDMI This is deactivated when a TV tuner box is installed 5 BNC Adjusting the LCD Display BNC mode is not supported if the component cable is connected To use BNC mode remove the component cable and connect the BNC cable 6 Component Component mode is not supported if the BNC cable is connected To use Component mode remove the BNC cable and connect the Component cable gr Note e The direct button on the remot
21. gt ENTER Sets how many pixels the screen moves horizontally Five adjustment levels 0 1 2 3 and 4 Vertical Line MENU gt ENTER Setup 5 gt Yo gt gt gt ENTER gt Safety Screen ENTER Pixel Shift ENTER Vertical Line gt ENTER Sets how many pixels the screen moves vertically Five adjustment levels 0 1 2 3 and 4 Time MENU gt ENTER Setup gt gt Yo gt Yo ENTER gt Safety Screen ENTER Pixel Shift ENTER Time a gt ENTER min Set the time interval for performing the horizontal or vertical movement respectively Timer Timer MENU gt 4 5 ENTER Setup gt gt gt gt gt ENTER gt Safety Screen gt gt ENTER Timer ENTER Timer gt ENTER Mode Period Adjusting the LCD Display You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish 1 Off 2 On MENU gt ENTER Setup gt gt Yo gt gt ENTER gt Safety Screen gt gt ENTER Timer 5 gt ENTER Mode gt ENTER
22. only on TV model The Maintenance Control feature is available only for the displays whose power status is ON gx Maintenance Yo Video Wall 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen pe du ip Display Control File Remocon Safety Lock Port Selection Help Select Alt Clear Ali Tema z Video Wall Video Wall OM OFF O or Wigo E forizontad Wara Format Natural O 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing e Select a mode from Screen divider e Select a display from Display Selection e The place will be set up by pressing a number in the selected mode e The MDC program supplied by Samsung supports up to 5x5 LCD Displayes 3 On Off Turns on off the Video Wall function of the selected display N 4 Format The format can be selected to see a divided screen e Full e Natural You may not operate this function in Magicl nfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power status is ON Troubleshooting 1 The display you wish to control does not appear
23. selected display to S Video Component Changes the Input Source of the selected display to Component Magicl nfo The Input source of Magiclnfo works only on Magiclnfo model HDMI Changes the Input Source of the selected display to HDMI Channel Channel arrow appears when the Input Source is TV TV Source can be selected only in products with TV and controlling channels is allowed only when Input Source is TV The Input Source Control feature is available only for the displays whose power status is ON Ee I mage Size PC BNC DVI 1 Click Image Size of the main icons and the Image Size control screen appears ime Multiple Display Control File Remocon Safety Lock Port Selection Help Select Alt Clear AN MG Busy PC Source PC BNC DVI 16 9 4 3 Info Grid shows some basic information necessary to Image Size Control 1 MI Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Shows the current Input Source of the display in use Info Grid displays only the displays whose Input Source is PC BNC DVI PC Source When you click Image Size the PC Source tab first appear The Image Size Control button controls Image Size available for PC BNC DVI Video Source Click the Video Source tab to control Image Size for respective Input Source The Input source of Magicl nfo work
24. solutions are listed Q The LCD Display screen flickers Troubleshooting A Check if the signal cable between the computer and the LCD Display is securely connected Refer to Connecting a Computer Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed Q The screen is blank and the power indicator is off A Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable 1s firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Q Q Check if the signal cable is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes DE EEG Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display Ifnot reset them referring to the current Informati
25. third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Multiple Di iy Control MDC S ystem Introduction RS 232C OUT RS 2326 In R5 232C In R amp 326 In RS 232C Out RS 232C Out RS 232C Out A Multiple Display Control MDC is an application allowing various displays to be easily and simultaneously operated on a PC RS 232C a standard of serial communication is used for the communication between a PC and a display Therefore a serial cable should be connected between the serial port on a PC and the serial port on a display Main Screen Click Start gt Program gt Samsung gt MDC System to start the program Select a set to see the volume of the selected set within the slider Seleer all Clear Al O L Power On Power Off Volume 10 sf Gb Main Icons O Select Button eo Remocon O Info Grid 3 Safety Lock 7 Display Selection 4 Port
26. AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN L AUDIO R on the LCD Display Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the LCD Display Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control Then start the Camcorders with a tape inserted Note audio video cables shown here are usually included with a Camcorder If not check your local electronics store If your camcorder is stereo you need to connect a set of two cables Connecting a DVD Player Connections 1 Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Display and the AUDIO OUT jacks on the DVD player 2 Connect a Component cable between the BNC COMPONENT IN Pr Y Pp port on the LCD Display and the Pr Y Pp jacks on the DVD player Note e Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control e Then start the DVD Player with a DVD disc inserted Note e A component cable is optional For an explanation of Component video consult your DVD manual Connecting a DTV Set Top Box P note e The connections for a typical Set Top Box are shown below 1 Connect a Component cable bet
27. C COMPONENT IN R G B H V ports on the back of your LCD Display and the 15 pin D sub Port on the computer Connect the audio cable for your LCD Display to the audio port on the back of your computer Note e Turn on both your computer and the LCD Display e The DVI cable is optional e Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connecting AV Devices 2 3 The Connections Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the LCD Display Then start the DVD VCR or Camcorders with a DVD disc or tape inserted Select AV using the SOURCE Note LCD Display has AV connection terminals to connect AV input devices like DVDs VCRs or Camcorders You may enjoy AV signals as long as the LCD Display is turned on Connecting to a Camcorder 4 The pa eg k PP f gt lt g SAR ba OUTPUT AUDIO VIDEO Locate the
28. HR Caplorar Ka Ee ara Support darama irama JE Search ll rege as 3 Click Display icon and choose the Settings tab then click Advanced Ba Eb ge Ag pr Qua D Lae Gta GT f es permer av a lagro Maa peer Lien Dagsa Fag red Poy bra core DE ropta bli man aha y Erika rpankkji Highest 22 kr TORA by FER patola L Bi NE 4 C Flordtor iige Bowen abah nata i oe gt 50 Henz a p Device ane Than janisa ja venleg popari Chasing thie check box aloen pou io aelect dlaplay modas ihat this li you ana hasang peoblems math the denice cick Troubleshoot ta macario Greta wonecik This may lead bo an unupable display ihat has i le Han d nn eared Welcome to the Hardware Update Wizard Plug are Play Morse 1 2001 0 If pour hardere came wilh an sutallstion CO i or Napag disk inanil il niw To seer akala aland ha hira fea To kila iha deies ior thee dayics what do pou rear the waned In doi HI PG l pen pE a automatically Recommended BoifackOnver IF ih chasca Pada aier the diyes poll D Bettas Diver a tee Cimier aka ee To aaa iho kira phare Dik Hest lo continue sto ia 6 Select Don t search I will then click Next and then click Have disk Using the Software Hardware Update Wizard Fieste chorta po poach and incl alain opines D esch ka he best drva in these locates Lee tha hack kaman balga ho imi oe dopar tha debut seach which
29. MENU r gt ENTER Setup ENTER Time ENTER Clock Set a T gt 4 ENTER Minute am pm aa Current Time Setting Sleep Timer MENU gt 4 5 4 5 ENTER Setup ENTER Time ENTER Sleep Timer gt ENTER Adjusting the LCD Display Move Enter O Return _ Turns the LCD Display off automatically at certain times 1 Off 2 30 3 60 4 90 5 120 6 150 7 180 On Timer MENU gt gt ENTER Setup ENTER Time 9 5 ENTER On Timer 4 ENTER Minute am pm 000 am Volume Source gr Turns the LCD Display on automatically at a preset time Controls the mode and the volume level at the time the LCD Display turns on automatically Off Timer MENU gt gt 4 5 ENTER Setup ENTER Time 0 gt gt gt ENTER Off Timer a T 4 ENTER Hour Minute am pm ak Turns the LCD Display off automatically at a preset time Adjusting the LCD Display Menu Transparency L 8 MENU gt 4 5 ENTER Setup ENTER Menu Transparency a ENTER High E Medium BEET Change the transparency of the background of the OSD 1 High 2 Medium 3 Low 4 Opaque Safety Lock PIN MENU gt 4 5 ENTER
30. Selection 8 Control Tools 1 Use the main icons to switch into each screen 2 Allows you to enable or disable the remote control signal receiving function of the display unit w Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote control and set The setting for the PC Serial Port can change The original value is COM1 Click Select all or Clear to select or clear all displays Use Grid to view brief information on selected display Select a display from Display Selection ON oan p Use Control Tools to control displays lt Note gt The remote control Enable Disable function operates whether or not the power is On Off and this applies to all displays connected to the MDC However regardless of the status at the time the MDC is shut down the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed Port Selection Multiple Display Comro File Remocon 169 Power On gt Power Off image Ss O Tirer Tra Volume 10 Lame Temp Status 1 The Multiple Display Control is originally set to COM1 2 If any port other than COM1 is used COM1 through COM4 can be selected in the Port Selection Menu 3 If the exact port name that is connected to the LCD Display using a serial cable is not selected communication will be unavailable 4 The selected port is stored in the program an
31. The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Pauses mutes the audio output temporarily This is displayed on the lower left corner of the screen The audio resumes 1f MUTE or VOL is pressed in the Mute mode Selects the TV and DTV mode directly Opens the on screen menu and exits from the menu or closes the adjustment menu Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu TV channels provide written information services via teletext Teletext Buttons 00 00080 0a Here amp 25 Hm For more information gt TTX MIX Press the button once to freeze the screen Press it again to un freeze Adjusts the screen display automatically in PC mode By changing the resolution in the control panel auto function is performed When pressing this button the current mode is displayed at the bottom centre of the screen The LCD Display has a built in high fidelity stereo amplifier Then press the button again to circle through available preconfigured modes Standard Music Movie Speech Custom MDC Quick Launch Button Activates or deactivates all function keys on both the remote con trol and the LCD Display except for the Power and LOCK buttons
32. Warranty Card User s Guide Not available in all loca tions Cables Power Cord Others I Remote Control Batteries AAA X 2 BNC to RCA Adaptor Jack Introduction Others Not available in all loca tions Sold separately SF DVI Cable Wall Mount KIT ma TV tuner box NetWork Box BNC Cable D Sub Cable Note LAN Cable Semi Stand KIT e You can purchase and connect a separate network box or TV tuner box For information on how to use these refer to their respective user manuals e You can only connect one external box Your LCD Display Front Rear Introduction MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu amp Navigate buttons Up Down buttons Moves from one menu item to another vertically or adjusts selected menu values a Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adjusts selected menu val ues When OSD is not on the screen push the button to adjust volume ENTER button ENTER Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Changing the source is only allowed for external devices that are connected to the LCD Display at the time PC DVI AV HDMI BNC Component pp Note e The TV menu is available when a TV tuner box is insta
33. You can change the Safety Screen Type 1 Scroll 2 Bar 3 Eraser MENU gt gt ENTER Setup gt gt Yo gt gt T ENTER gt Safety Screen ENTER Timer ENTER Period a gt ENTER Use this function to set the execution period for each mode set in the timer Adjusting the LCD Display Time MENU gt 4 5 ENTER Setup gt gt Yo gt Yo ENTER gt Safety Screen ENTER Timer ENTER Time gt ENTER Within the set period of time specify a time for execution e Mode Scroll 1 5 sec e Mode Bar Eraser 10 50 sec Scroll MENU gt 4 5 ENTER Setup gt gt Yo gt gt ENTER gt Safety Screen ENTER Scroll This function prevents after images on the screen by moving all the pixels on the LCD according to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time Bar MENU gt 4 5 ENTER Setup gt gt gt gt gt ENTER gt Safety Screen gt ENTER Bar Pixel 5 hift Timer This function prevents after images on the screen by moving long black and wh
34. a cabinet or rack of a size appropriate to the product L DO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD UCT e Otherwise this may result in fire L Keep heating appliances as far away from the power cord or the prod uct as possible e Otherwise this may result in electric shock or fire Safety Instructions L Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the internal temperature L When putting the product down make sure to put it down softly PE j e Otherwise this may result in damage to the screen display L Do not place the front of the product on the floor fe ON e Otherwise this may result in damage to the screen display L Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount q gt L Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall a e Otherwise it may result in fire due to an increase in the internal tem perature L Ensure that the packaging vinyl is kept away from children ar Ni UV U Otherwise it may result in serious harm suffocation if children play RA with it L If the height of your monitor is adjustable
35. atus is ON The Input source of Magicl nfo works only on Magic nfo model The Input source of TV works only on TV model Pi i lt x Maintenance Ww Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen i Multiple Display Control File Remocon Safety Lock Port Selection Help Select All Clear All 1 Scroll This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time 2 Pixel Shift This allows the screen to be moved finely at the specified time interval 3 Safety Screen The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the time when the Safety Screen function must be performed The Type item can be set to Scroll Pixel Bar Eraser All White or Pattern 4 Safety Screen2 This function is used to prevent afterimages from occurring There are five 5 types that you can select and control with this function For the Scroll type the Time item can be set to 1 2 3 4 or 5 For the Bar and Eraser types it can be set to 10 20 30 40 or 50 For the All White and Pattern type it can be set to 1 5 10 20 or 30 The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works
36. blocks move with erasing the display Information TIME OZ348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Eraser e Time Interval I 10 hours Recommend I e Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not available Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA TRINIDAD amp TO BAGO VENEZUELA AUSTRIA BELGIUM CZECH REPUBLIC DENMARK EIRE FINLAND North America 1 800 SAMSUNG 726 7864 1 800 SAMSUNG 726 7864 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe http www samsung com us http www samsung com ca http www samsung com mx http www samsung com ar http www samsung com br http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http
37. card used Maximum resolution 1366x768 60Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high 2 2 0 V V low 8 0 8 V Maximum Pixel Clock 140MHz Analog Digital Power Supply AC 100 240 V 10 Yo 50 60 Hz 3 Hz Signal Cable 1 5pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Without Stand 780 0 x 482 0 x 109 0 mm 30 7 x 19 0 x 4 3 inch Dimensions W x H x D Weight With Stand 780 0 x 545 x 311 0 mm 30 7 x 21 5 x 12 2 inch 13 7 kg 30 2 Ibs Specifications Dimensions W x H x D Weight With Stand With protection glass option 19 2 kg 42 3 lbs VESA Mounting Interface 200 x 200 mm Environmental considerations Operating Temperature 32 F 104 F 0 C 40 C Humidity 10 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings In most cases the LCD Display installation will proceed auto matically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with
38. computer Therefore 1f there 1s a problem with the computer or the video card this can cause the LCD Display to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 56 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel gt System gt Device Administrator and then reboot the computer to reinstall the Adaptor video driver Check List E note e The following table lists possible problems and their solutions Before calling for assistance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer Problems related to the Installation PC Mode Note Problems related to the LCD Display installation and their
39. d used for the next program as well Power Control 1 Click Power Control of the main icons and the Power Control screen appears i Multiple Display Control BE SE z ea ELE x File Remocon Safety Lock Port Selection Help SAMSUNG DIGIT Select gt Clear att m o input mage Sie On Timer Tirer pasi O Power On Power Off po 9 O C Input Source I Fe m i tne SE Image Size pe o MG 08 ame Tro Sans Bisan Fan Com Pal laint anance Ye Info Grid shows some basic information necessary to Power Control 1 81 Power Status 2 Input 3 Image Size 4 5 On Timer Off Timer 2 Use the Select All button or Check Box to choose a display to control fr Multiple Display Control Hi Se 8 MEET sex pa Power On Power Off Input Source EE Yolume 10 S Image Size Settings lt Mainte mante Je ll Power Control allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider When you cancel the selection or choose Select All the value returns to the default value 10 3 EB Mute On Off Turns on off the Mute function of the selected display When selecting one set at a time turn on the Mute funct
40. do not place any object or part of your body on the stand when lowering it 45 e This may cause damage to the product or the person carrying it Clean When cleaning the monitor case or the surface of the TFT LCD screen wipe AN with a slightly moistened soft fabric L Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off L Clean the product using a soft cloth with a monitor cleaner only If you must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 L When cleaning the power plug pins or dusting the power outlet clean 3 it with a dry cloth Gra Otherwise it may result in fire Others Safety Instructions L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire L When cleaning the product disconnect the power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mos quito repellant lubricant or cleaner These may change the appear ance of the product surface and peel off the indication labels on the product L Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is a
41. dren mg ares 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Select the deviar driver you want to inptall few this hardware am pa rage rd aha pl par Pari aai Par Elin Pama Fy S re doll Fl sid Vai ee pi mil La Harri ie oat ON narge N nag eee Aiba h r subo Ad updsled your d sofware S a mere Top am li plein Pei rin Vi Ti pink Pk eae aa Na Pa a be ces dn aan atang a dere ad Dich 15 Pa RA ot Ti areata Pa dee Labret Drag the icons to match your monitors biomi paing Screen refresh rate Sa Hertz Of bide modes that thes monitor cannot dsplay la sasa on NVIDIA GeForce 6600 LE Microsoft C Clarin than cheeck ben apa you ko select daplay modes that thig monitor cannot display correctly This may lead to an unusable i Thug ig my main maagor tend the desktop onto thr mormor Microsoft Windows XP Operating System Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon p ieee ae eee AE Internst Caplorc OG rv Bocuments a E mail p mv Recent Documents k Ort loss Caprona ee KS Pete Die ree a HET 10 0 E gt ay Pee ask Notopad mia Py aaah wW Paint GED verdens media Mayor Tree Nag wee one aes ee E re ear p pg er ge arne Ae pr apa on al te Printers And Pawas Pair ior Larger anil Pryd Delle a he
42. e control is the SOURCE button e For PC and DVI this is deactivated if the cable is disconnected Edit Nameld 4 MENU ENTER Input ENTER Edit Name gt ENTER Name the input device connected to the input jacks to make your input source selection easier VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR PC Picture PC BNC DVI Mode Available Modes L PC BNC DVI gt Elav gt UG HDMI H Component P Note e The TV menu is available when a TV tuner box is installed Adjusting the LCD Display The MagicInfo menu is available when a network box is installed MagicBright Li MENU ENTER Picture ENTER MagicBright gt ENTER Custom MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching Currently four different modes are available Entertain Internet Text and Custom Fach mode has its own pre configured brightness value You can easily select one of the four settings by simply pressing the MagicBright control button l Custom Entertain High brightness For documents or works involving heavy text Internet Medium brightness For working with a mixture of images such as texts and graphics Text Normal brightness For documents or works involving heavy text Custom Although the va
43. e harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government of fice for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This prod uct and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Europe only Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indi cates that the batteries in this product should not be dis posed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and re cycle them through your local free battery return system Authority
44. e weak RGB signal transmitted by a long signal cable MENU ENTER Picture Yo ENTER Signal Bal ance Available in PC mode only Adjusting the LCD Display Signal Balance MENU ENTER Picture 5 ENTER Signal Bal ance ENTER Signal Balance gt ENTER Selects either On or Off with the signal control Signal Control MENU ENTER Picture Yo Yo ENTER Signal Bal ance gt gt ENTER Signal Control l R Gain MENU ENTER Picture gt gt ENTER Signal Balance ENTER Signal Control ENTER R Gain 4 ENTER G Gain MENU ENTER Picture 5 gt ENTER Signal Balance ENTER Signal Control ENTER G Gain 4 gt ENTER B Gain MENU ENTER Picture gt ENTER Signal Balance Y ENTER Signal Control ENTER B Gain 4 ENTER R Offset MENU ENTER Picture gt ENTER Signal Balance gt ENTER Signal Control 5 gt gt ENTER R Offset
45. eo Component HDMI DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected display 6 Tint Adjusts Tint of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magici nfo model Color Temp is only enabled if the Color Tone is set to Off The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Settings bi at Picture PC 1 Click Settings of the main icons and the Settings Control screen appears f Muhiple Display Contra File Remocon Safety Lock Port Selecion Help Select All Clear AN Busy JA E e Picture PC PC BNC DVI Color Tone Color lemp 100006 Brightness Sensor Dynamic Contrast Red Green Blue Color Control is not available in case of DVI Source Je Info Grid shows some basic information necessary to Settings Control When each functio
46. ff Power Consump 130 W Less than 2 W 1 W 0 W tion Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 258 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 F VESA 800 x 600 37 879 60 317 40 000 T VESA 800 x 600 48 077 72 188 50 000 T VESA 800 x 600 46 875 75 000 49 500 HF VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 tear VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 X 960 60 000 60 000 108 000 er VESA 1280 X 1024 63 981 60 020 108 000 HF VESA 1280 X 1024 79 976 75 025 135 000 PF VESA 1360 x 768 47 712 60 015 85 500 dt VESA 1366 x 768 47 112 59 790 85 500 HA Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontal
47. gicInfo mode Video Wall MENU 4 5 ENTER Setup 5 gt Yo gt gt ENTER Video Wall ENTER Video Wall 54 gt ENTER Turns Off On the Video Wall function of the selected display Off On 1 Off 2 On Adjusting the LCD Display Format MENU 4 5 ENTER Setup 5 gt Yo gt gt ENTER Video Wall ENTER Format gt ENTER Move E Enter O Retum The Format can be selected to see a divided screen 1 Full Provides a full screen without any margins 2 Natural Displays a natural image with the original aspect ratio intact Horizontal MENU ENTER Setup 5 gt Yo Yo gt gt ENTER Video Wall gt ENTER Horizontal gt ENTER Move Enter O Return Sets how many parts the screen should be divided horizontally Five adjustment levels 1 2 3 4 and 5 Vertical MENU ENTER Setup 5 gt Yo gt ENTER Video Wall ENTER Vertical gt ENTER Move Enter Return Sets how many parts the screen should be divided vertically Five adjustment levels 1 2 3 4 and 5 Adjusting the LCD Display Screen Divider MENU 4 5 ENTER Setup 5 gt
48. he selected display to DVI AV Changes the source of the PIP of the selected display to AV S Video Changes the source of the PIP of the selected display to S Video Component Changes the source of the PIP of the selected display to Component HDMI Changes the source of the PIP of the selected display to HDMI Note Some of the PI P Sources may not be available for selection depending on the input source type of the Main Screen The Input source of Magicl nfo works only on Magic nfo model The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON i 7 Settings Picture 1 Click Settings of the main icons and the Settings Control screen appears Multiobe i isp ay Control File Remocon Safety Lock Por Selection Help Sel8 Al Charity Picture MW AVW S Wideo Component HOMI OT Contras bf Brightness ba 1 Sharpness G Lolor Color Tone Color Temp 10000K Brightness Sensor Ye Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture Available only for TV AV S Vid
49. icture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function a When viewing a fixed screen for an extended period of time a residual image or blur riness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the LCD Display for an extended period of time PRODUCT INFORMATION Image Retention Free E3 What is Image Retention Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO Black Matrix Color Filter Data Gate al TFT Pixel Electrode Storage Capacitor Bus Line ITO Cs o Power Off Screen Saver or Power Save Mode e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Set the Moni
50. ifference in volume control between broadcasters 1 Off 2 On SRS TS XT Li BE Setup MENU 4 5 ENTER Sound gt ENTER SRS TS XT a gt ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On Note The direct button on the remote control is the SRS button Available Modes JPC BNC DVI Elav HDMI 4 Component Adjusting the LCD Display Note e The TV menu is available when a TV tuner box is installed e The MagicInfo menu is available when a network box is installed Language L L MENU gt ENTER Setup ENTER Language gt ENTER nglish italiano You can choose one of 13 languages English Deutsch Espafiol Francais Italiano Svenska PycckaH Portugu s T rk e HEF Siah BAG 30 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Time La bs Selects from one of 4 time settings Clock Set Sleep Timer On Timer and Off Timer MENU 4 5 ENTER Setup ENTER Time Clock Set
51. ily it compakbiliy wall inalog PP Tell me wakas hep belir ix impautard Continuing pour installation of this software mag impair or destabilize the comect operation of your system eather immediately or m the future Mrorosoft sbrongig recommends thal pou rop this installation now and eomact the hardware vendor for software that has passed Windows Logo testing Continue Argway STOP Inetallstion Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tha vazad kar Arah mabaling the sofiera kar a Samsung mawa het Fah lo diria the vated pa Danma Diisi nga Samsung eee Diwa Prove Sang Diyes Date ST 12200 Dina Yes pae Tam Coia Sagres Hot iiia g Ta vira datali abau Hha dra Vikas Draw Del s le Bol Back Drever uren Toisia iha dien fog Uva chine ii tho dasen bada ator the hha ro back bo ihe pier mibale chorea To umia ha di bareel Camme 10 Using the Software Plog and Play Monitor and A Prophet WP roporiies Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps l PA 3
52. in NTSC system Color Tone LU MENU ENTER Picture gt ENTER Color Tone gt ENTER Move Enter Return Adjusting the LCD Display The color tones can be changed The individual Color components are also user adjustable 1 Off 2 Cool2 3 Cooll 4 Normal 5 Warmi 6 Warm2 77 Note If you set the Color Tone to Cool2 Cooll Normal Warm1 or Warm2 the Color Temp function is disabled Color Temp MENU ENTER Picture ENTER Color Temp 4 ENTER Color Temp CO 000K Color temp is a measure of the warmth of the image colors Note This function is only enabled if the Color Tone is set to Off Size LEIS MENU ENTER Picture 5 9 5 9 5 ENTER Size gt ENTER Kao EC Just Scan The Size can be switched 1 16 9 Sets the picture to 16 9 wide mode 2 Zoom 1 Magnifies the size of the picture on the screen 3 Zoom 2 Magnifies the size of the picture more than Zoom 1 4 4 3 Sets the picture to 4 3 normal mode 5 Just Scan Displays the input scenes as they are without any cutoff when HDMI 720p 10801 1080p signals are input Adjusting the LCD Display Note Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature ZOOM1 ZOOM will be unavailabel in HDMI
53. includer bea patha aed sennorsalbke indie The best dress und wal be inalaked Choose the option ko select the desce drea homa bot Wirde does mot guarentee hat Bon rer pos hoo yall ba ha Beret makoh For pour hace Gees Cas hardware Update Wizard Telet the dovide dive pou want bo install le this hardware i H le the mar scbhaer ard model of pour hatian deve and then ckek Hasi Il you have a dk that oontaens the dys pou want lo atal gba Have Diik ures companba Federaal Mie Dal Pinag and Pap orate E Tian rein it gay grad Taima viu dien nere ii Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk Intl Ihe manu schuter s matallahon dik and then make sue that the conect drive i selected below Copy manulachuner s flies om Hardware Update Wizard Selec the device diet Fou want bo inalali for thia herder Sebel the morukachaer ard model of vas hardere dee ard an check Hest If jp 3 have drik that carbara the darai you mari bo mibali chek Hawa Dok Madel Samsung Ku This dower t sot digatally signed T l mme whe Sinvest marina ii meer ar Cae CEJ Coe If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou are installing Ice this hadvare Samsung sara has not passed windows Logo heating lo war
54. ion for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All The Power Control feature is available for all displays The Volume Control and Mute features are available only for the displays whose power status is ON amp Input Source 1 Click Input Source of the main icons and the Input Source control screen appears Click Select All or use Check Box to select a display to control TV Mode fm flu ip Disolay Control File Remocon Safety Lock Port Selection Help Select Alt Clear Alt Choose Input Source PC AV 6 S Video Component 8 singers O HDMI Channel A w e PC Mode 10 11 f r Multiple Display Control File Remocon Safety Lock Port Selection Select Alt Clear At Choose Input Source AV S Video Component fk 5 or a mit 9 HDMI 40 Info Grid shows some basic information necessary to Input Source Control PC Changes the Input Source of the selected display to PC BNC Changes the Input Source of the selected display to BNC DVI Changes the Input Source of the selected display to DVI TV Changes the Input Source of the selected display to TV DTV Changes the Input Source of the selected display to DTV AV Changes the Input Source of the selected display to AV S Video Changes the Input Source of the
55. ite vertical lines Adjusting the LCD Display Eraser MENU gt 4 5 ENTER Setup gt gt Yo gt gt ENTER gt Safety Screen gt gt ENTER Eraser This function prevents after images on the screen by moving a rectangular pattern Resolution Select Li MENU gt 4 5 ENTER Setup gt Fo SY gt gt gt gt gt 7 5 ENTER gt Resolution Select gt ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz by using this function Resolution Select you can have the picture displayed on the screen in the specified resolution Available in PC mode only 1 Off 2 1024 X 768 3 1280 X 768 4 1360 x 768 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz Power On Adjustment MENU 7 5 ENTER Setup gt gt gt To gt gt gt 7 5 ENTER Power On Adjustment gt ENTER Adjusting the LCD Display Adjust Enter ORetum _ Adjusts the Power On time for the screen Caution Set the Power On time to be longer to avoid overvoltage Side Gray MENU gt
56. lled e The MagicInfo menu is available when a network box is installed D MENU Opens the on screen D MENU Note e This is available when a TV tuner box is installed Power button 5 Use this button for turning the LCD Display on and off Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods Remote Control Sensor Aim the remote control towards this spot on the LCD Display Note For detailed information concerning cable connections refer to Connecting Cables under Setup The LCD Display s configuration at the back may vary slightly depending on the LCD Display model Introduction power S W ON OFF 0 Switches the LCD Display On Off POWER IN The power cord plugs into the LCD Display and the wall plug RS232C OUT IN RS232C Serial PORT MDC Multiple Display Control Program Port O DVI PC HDMIIN DVI PC HDMI AUDIO IN PC DVI HDMI Audio Connection Terminal Input GO DVI PC HDMI IN HDMI Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your dig ital output device using a HDMI cable Q DVI PC HDMI IN RGB PC Video Con nection Terminal Using a D Sub Cable 15 pin D S
57. lues are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu By using the on screen menus the contrast and brightness can be changed to your personal preference MENU ENTER Picture gt ENTER Custom Note By adjusting the picture using the Custom function MagicBright will change to Custom mode Contrast MENU ENTER Picture ENTER Custom ENTER Contrast 4 ENTER Contrast Adjusting the LCD Display Adjusts the Contrast Brightness MENU ry ENTER Picture Y gt ENTER Custom T ENTER Bright ness 4 ENTER Brightness Move Adjusts the Brightness Sharpness MENU ENTER Picture gt gt ENTER Custom 5 gt ENTER Sharpness 4 ENTER Sharpness Adjusts the Sharpness Color Tone MENU ENTER Picture ENTER Color Tone gt ENTER The color tones can be changed 1 Off 2 Cool 3 Normal 4 Warm 5 Custom 77 Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Color Control Adjusts individ
58. ly is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit H Information For Better Display ba Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen 1f the best picture quality 1s not provided for TFT LCD e Resolution 1360 x 768 e Vertical frequency refresh rate 60 Hz ba TFT LCD panels manufactured by using advanced semiconductor technology with a precision of Ippm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 3 133 440 When cleaning the LCD Display and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it D If you are not satisfied with the picture quality you can get better quality of p
59. majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange informa tion automatically This monitor follows the international standard VESA DDC for the Plug amp Play function The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the ac Appendix curacy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1360 x 768 this means the screen 1s composed of 1360 horizontal dots horizontal resolution and 768 vertical lines vertical resolution SRS TS XT This feature outputs sonorous and vivid 3D sound as for 5 1 chan nel speaker sound but through a 2 channel speaker It has a good effect when stereo signals are input Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European ai Mae countries with separate collection systems NG This marking on the product accessories or literature in dicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of i with other household waste at the end of their working life O To prevent possibl
60. mode Digital NR Digital Noise Reduction 1 4 MENU ENTER Picture 5 gt gt ENTER Digital NR a ENTER Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Film Mode LIA MENU ENTER Picture gt Yo ENTER Film Mode ENTER Turns Film Mode Off On The Film Mode feature offers you a theater quality viewing experience In HDMI mode this function can be available when the input signal is interlaced scan it cannot be available with progressive scan signal 1 Off 2 On Dynamic Contrast L MENU 7 5 ENTER Picture Yo Yo 7 5 ENTER Dynamic Contrast Adjusting the LCD Display Move Enter O Return gt ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Sound Available Modes DPC BNC DVI Elav 1 HDMI 4 Component r Note e The TV menu is available when a TV tuner box is installed e The MagicInfo menu is available when a network box is installed Mode MENU gt ENTER Sound ENTER Mode gt ENTER Music Movie The LCD Display has a bullt in high fidelity stereo amplifier
61. n is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture PC Available only for PC BNC DVI 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NT 5 Green Adjusts green Color of the selected display Available only for NT 6 Blue Adjusts blue Color of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of Magicl nfo works only on Magic nfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Settings a Audio 1 Click Settings of the main icons and the Settings Control screen appears ie Multiple Display
62. ng com it http www samsung com lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com sk 902 1 SAMSUNG 902 172 http www samsung com es 678 075 SAMSUNG 726 78 64 http www samsung com se 0848 SAMSUNG 7267864 http www samsung com ch CHF 0 08 min 0845 SAMSUNG 7267864 CIS 800 7267 8000 7267 8 800 77777 8 10 800 500 55 500 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 Asia Pacific 1300 362 603 800 810 5858 400 810 5858 010 6475 1880 HONG KONG 3698 4698 3030 8282 1 800 3000 8282 1800 110011 0800 112 8888 0120 327 527 http www samsung com uk http www samsung com ee http www samsung com lv http www samsung com It http www samsung com kz ru http www samsung ru http www samsung ua http www samsung com kz ru http www samsung com au http www samsung com cn http www samsung com hk http www samsung com in http www samsung com id http www samsung com jp Terms MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA TURKEY U A E Dot Pitch Vertical Frequency Horizontal Frequency Interlace Methods Plug amp Play Resolution 1800 88 9999 Appendix Asia Pacific http www samsung com my 0800 SAMSUNG 0800 726 http www samsung com nz 786
63. ng type by using the DUAL button on the remote control while watching TV MTS You can select MTS Multichannel Television Stereo mode Audio Type MTS S Mode Default FM Stereo Mono Mono Manual Change Stereo Mono lt gt Stereo SAP Mono gt SAP Mono Every time you press the button a PIP screen appears This fuction does not work for this LCD Display Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window This fuction does not work for this LCD Display Introduction Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation professionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions 138 0 191 0 3 SAM SUNG pka a 438 0 428 5 AN Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Introduction Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not
64. not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily op erable e This may cause electric shock or fire L Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor w Q L Ensure that at least two persons lift and move the product ANG 9 e Otherwise it may be dropped and cause personal injury and or dam 3 age the product O L When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out mi Otherwise it may fall or cause personal injury e Use
65. ntrol helps stop unauthorized changes to your computer Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Dena PT Ti Fra DE AnG preety i Ta waa ntb cui Shay Siver ba To upis a Greer pie Sor i daa e drvca Kai fer opii ap ar ral ach Sah previa raae e hasina pa minini dica Ta umiral Fa dia Aro Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer E s Hoey Oo you ward 10 Hah koa der r s0fbmanet Wrong revet agane Gn par cae dart V r deere apan n Fax aan Dearth gutomatcally lee opdadpd draer piihin Kirakan andl pepe gaan Elben deve fe fer Lele fro nara Fes pra dryers F petal mekke Li tal ea e aaa La ere peek bom fit of Geeks drani on My computer Fan fied rd Chee orale disse Pee ogee alt Ver beer arad ul ir aga an er igar egy me draa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software ken eure Fat the coo bd te is eeleched belte Sarte the der driver you smil o sl hor his hardan vent Conceal Cancel a Pa Simip dri a pl pin Paan spin a Par ih Pama BF pny Bare Peal an a a ele met Lal ek o Che rn gren tees Hr jo EE DJ Te
66. ny foreign material on the cloth make sure to shake it thoroughly before using it L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunction L The product is a high voltage product Ensure that users do not disas semble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and contact a Service Center e Otherwise this may result in electric shock or fire L Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire L If thunder or lightening is occurring do not touch the power cord or antenna cable e Otherwise this may result in electric shock or fire Safety Instructions L Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product o
67. o not drop any objects onto the product or cause any impact TF to the product e Otherwise this may result in electric shock or fire KA L Do not use a humidifier or kitchen table near the product tal a Otherwise this may result in electric shock or fire o _ LJ When there is a gas leak do not touch the product or the power PE plug but ventilate immediately AL e fa spark occurs it may cause an explosion or fire L If the product has been turned on for a long time the display panel becomes hot Do not touch it L Keep the small accessories in a location out of the reach of children 1 En L Be careful when adjusting the angle of the product or the height a of the stand ini e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause personal injury o L Do not install the product in a location low enough for children ILLE fo reach S TI e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface Introduction Package Contents Note Please make sure the following items are included with your LCD Display If any items are missing contact your dealer Contact a local dealer to buy optional items Note This stand is not for the Floor Standing Type Unpacking LCD Display Manuals Quick Setup Guide
68. oesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click GA Start and Control Panel Then double click on Appearance and Personalization 3 Coe bre nie mr ee ee ee ee ee Er r l ge sa ame ma eed tee api a le ee ee ee ee ee ee ee os om Sage Gran ee ee ee es ee ee Ag besoa ma Fam r Se man ee ee ee eg ee ee Er Lima Nag l Bs ieem Vanson um ogee maan age a ee E EEr ee a eee ae hd a pama nd rama baga a po pet P ma ka ang Pe r 4 Dang Pr Kora ba makeh your eer i laiph Menitzes pa PHEA Gefore DOG LE inna Corp tor 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as 1s If the message Windows needs 1s displayed as shown in the figure below click Continue Using the Software per Mortar Tupi Bg sere re monn at L F INdOWwS Needs your permission lo conbonue Morwhor Ganga Seren rens rete CT ax Pia aa Tr rd PAPA AA Gearing Pia check bon blest vin io akal damia seder Fat Sha mai canst dagling cored tty Then may bead 55 n urea plage andlor damage hardest Sontinwe Cancel User Account Co
69. ol feature is available only for the displays whose power status is ON N Time 1 Click Time of the main icons and the Time Control screen appears Miu ifa Display Conirol File Remocon Safety Lock Port Selection Help SelectAll Clear All Hour Minute AM R Ye Info Grid shows some basic information necessary to Time Control 1 Current Time Set the current time for the selected display PC Time To change the current time first change the PC Time 2 On Time Setup Set the Hour Minute AM PM of On Time Setup Status Source Volume of the selected display Off Time Setup Set the Hour Minute and AM PM Status for Off Time Setup of the selected display 4 Shows the On Time settings 5 Shows the Off Time settings The Input source of Magicl nfo works only on Magic nfo model The Input source of TV works only on TV model Time Control is available only for the displays for which the power status is ON At On Time Setup TV Source functions only for TV Model At On Time Setup Magicl nfo Source functions only for Magicl nfo Model x ma ING PIP PIP Size 1 Click PIP of the main icons and the PIP control screen appears Click Select All or use Check Box to select a display to control im Multiple Display Control File Remocon Safety Lock Port Selection Help Select All Clear Al All Inputs OFF Large Small Double 1 Double
70. on the Power Control Info Grid Check the connection of RS232C Check if it is properly connected to the Com1 port Check the displays to see if any of the other displays connected have the same ID If more than one displays have the same ID those displays are not properly detected by the program due to data conflict Check if the Display Set ID is a number between 0 and 25 Adjust using the Display menu Note A Display Set ID must be a value between 0 and 25 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You can check this in Power Control Info Grid Check if you can change the input source of the display The dialogue box appears repeatedly Check to see if the display you wish to control is selected Both On Timer and Off Timer have been set but different time is showing Apply current time to synchronize the display clocks The remote may not function properly when you turn off the remote Function disconnect the RS 232C cable or exit the program in an Irregular manner Rerun the program and turn the remote function again to Restore normal functions lt Note gt This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby Please make selection in the information qrid before controlling Settings Value Display In Multiple Display Mode When there are more than one
71. on under the LCD Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display Ifnot reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Q The image is too light or too dark Adjusts the brightness and contrast Refer to the Brightness Contrast Q The screen color is inconsistent gt Fy Dy 2 Troubleshooting Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white 1s poor Adjust color using Custom under OSD Color Adjustment menu The Power Indicator blinks The LCD Display is currently saving the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The LCD Display is using its power management system Press any key on the keyboard The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the LCD Display and the computer to ensure that the con nector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A ym Q Q No sound Ensure that the
72. ows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual Windows ME 2000 Troubleshooting Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual How can I clean the outer case LCD Panel Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display How can I play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible Note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Specifications General General Model Name SyncMaster 320MP 2 LCD Panel Size 32 Diagonal 80 cm Display area 697 68 mm H X 392 3 mm V Pixel Pitch 0 51075 mm H X 0 51075 mm V Synchronization Horizontal 30 81 kHz Vertical 56 85 Hz Display Color 16 7M Resolution Optimum resolution 1360 x 768 60 Hz 1366 x 768 60 Hz depends on graphics
73. p Control 4 ENTER Adjusts the inverter lamp in order to reduce energy consumption a Note This function does not operate when Dynamic Contrast is set to On in PC DVI AV HDMI TV modes Multi Control Available Modes e JPC BNC DVI Elav Adjusting the LCD Display HDMI 4 Component Multi Control L is Assigns an individual ID to the SET MENU gt gt gt ENTER Multi Control ENTER a 0 9 e ID Setup Assigns distinctive IDs to the SET ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter setting becomes activated Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below Check Signal Cable appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen IP Check Signal Cable PC 4 Turn off your LCD Display and reconnect the video cable then turn on both your computer and the
74. parately Note The location of the Kensington Lock may be dif ferent depending on its model Using the Anti Theft Kensington Lock I Insert the locking device into the Kensington slot on the Monitor Onn turn it in the locking direction 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object Note See Connecting Cables for further information regarding cable connections Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with the frequency Introduction power O off Number Buttons DEL button VOL ok MUTE TV DTV F MENU Ez i INFO COLOR BUTTONS SATTXMIX STILL SAMSUNG AUTO S MODE MDC LOCK SOURCE ENTER PRE CH vw CHP A D MENU GUIDE RETURN Up Down Left Right buttons exit srs MagicInfo P MODE FI DUAL MTS PIP SWAP 6 0089906899800 060060 6 690W 9696 9BM9009 00 L t POWER Turns the product On 2 OD off Turns the product Off 3 Number Buttons Press to change the channel 4 DEL button 5 VOL 6 2X MUTE 7 TV DTV 8 m MENU 10 INFO 11 COLOR BUTTONS 12 ELA TTX MIX 13 STILL 14 AUTO 15 SMODE 16 MDC 17 LOCK 18 SOURCE 19 18 ENTER PRE CH 20 WCH PA 21 D MENU 22 GUIDE 23 3 RETURN Introduction
75. play has four automatic picture settings Dynamic Standard Movie and Cus tom that are preset at the factory Dynamic Standard Movie or Custom can be activated 1 Dynamic 2 Standard 3 Movie 4 Custom Note The direct button on the remote control is the P MODE button Custom UO 8 By using the on screen menus the contrast and brightness can be changed to your personal preference MENU ENTER Picture ENTER Custom Contrast MENU ENTER Picture ENTER Custom ENTER Contrast 4 ENTER Adjusting the LCD Display Contrast I 100 Move ay Adjust Adjusts the Contrast Brightness MENU ry ENTER Picture gt ENTER Custom ENTER Bright ness al ENTER Brightness Adjusts the Brightness Sharpness MENU ENTER Picture gt gt ENTER Custom 5 gt gt ENTER Sharpness 4 ENTER ab Sharpness Adjusts the picture Sharpness Color MENU ENTER Picture ENTER Custom 5 gt 9 5 F gt ENTER Color ENTER Adjusts the picture Color Tint MENU ENTER Picture gt ENTER Custom 5 gt 7 5 ENTER Tint 4 ENTER Adds a natural tone to the display ar Note Tint function can be available just
76. pply the Screen Scroll function on Product e Apply the Screen Scroll function Symptom Horizontal Bar with Black Color move up and down Horizontal Bar wath Black color ELIGNTI Vick 02348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Screen Scroll e Time Interval I 10 hours Recommend I e Time Period 1 5 second Recommend 5 Information Note Please check CD s User Guide at OSD Function some model s will not available Apply the Screen Pixel function on Product e Apply the Screen Pixel function Symptom Dot with Black Color move up and down FLIGHT TIME OZ348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Pixel e Time Interval 1 10 hours Recommend 1 e Time Period 10 50 second Recommend 50 e Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down mn FLIGHT TIME Horizontal Bar 0348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Bar e Time Interval I 10 hours Recommend I e Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not available Apply the Screen Erasing function on Product e Apply the Screen Erasing function Symptom 2 Vertical
77. preci sion of lppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 133 440 Note Design and specifications are subject to change without prior notice pa Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Oper Power saving Power off Power off ation mode Power but Power switch ton Power Indicator On Blinking On O
78. r L Set a resolution and frequency appropriate to the product e Otherwise your eyesight may be damaged L When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing L If you continually move closer to the product screen your eyesight may be failing Safety Instructions L Take a rest for at least five 5 minutes after using the monitor for one 1 hour This reduces the weariness of your eyes L Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e If you use the product in a location exposed to vibrations it may damage the product and result in fire L When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire L Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage L Do not place any heavy items or toys or confectionery such as cookies etc
79. r fire due to damage to the cable L Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal tem perature L Do not place any containers containing water vases flowerpots med icines as well as any metal on the product e Ifwater or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L Do not use or keep combustible spray or flammable material near the Ym product e Otherwise this may result in an explosion or fire L Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the product through the ventilating openings input and output terminals etc e If water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L When using a fixed screen for a long time an afterimage or stain may occur e Ifyou are not using your product for a long period of time put it into sleep mode or use a moving screen save
80. responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product Ba i f b Lg pr ii li IG SS ey oe F 1 amp i 4 s i Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw B Anchor 1 Hanger A 11 4 11 4 Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall There are two hinges left and right Use the correct one A Captive Screw B Wall Bracket C Hinge Left D Hinge Right Introduction 2 Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or some of the 4screws on the wall bracket to adjust the length 7 i ia i EN D fat IRS Kk Le oy Maa ta wy i amp amp A Length between the two locking holes 3 Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and in
81. s only on Magicl nfo model The Input source of TV works only on TV model Image Size Control is available only for the displays for which power status is ON EG I mage Size TV AV S Video Component DVI HDCP HDMI DTV 1 Click Image Size of the main icons and the Image Size control screen appears im Multiple Display Control File Remocon Safety Lock Port Selection Help Select Alt Clear Ali TAV S Video Component HOMI OTW Image Size Auto Wide Wide Zoom Zoom Zoom 1 Zoom 2 4 3 Just Scan Wide Fit Screen Mode 16 9 Wide Zoom Zoom Ye Info Grid shows some basic information necessary to Image Size Control 1 Click the Video Source tab to adjust Image Size for TV AV S Video Component DVI HDCP HDMI DTV Click Select All or use Check Box to select a display to control Info Grid displays only the display having TV AV S Video Component or DVI HDCP as input source 3 Switch Image Size of the selected display randomly Note Auto Wide Zoom1 and Zoom2 are not available for selection when the input signal type for Component and DVI HDCP is 720p or 10801 The Auto Wide mode is available only for TV AV and S Video 4 The screen modes can only be adjusted when a TV PAL only is connected and the Image Size item is set to Auto Wide The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model The I mage Size Contr
82. sert and tighten the 11 screws A al a gr Pd amp MC ge prs Sg el TA PA mg A KA a al r 25 er ARF at BY 7 F g Pd ay Pr ar V der Gr e er To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product Introduction 2 Insert the screw B into the plastic hanger Of dp AN Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket Introduction A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 MET 2180 gt 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and p
83. tor to power off with the PC Display Properties Power Scheme e Use a Screen saver if possible Screen saver in one color or a moving image is recom mended Change the Color Information periodically Type 1 FLIGHT Type 2 FLIGHT O2348 02348 UA102 UA102 Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes Information e Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey 02348 203 oe ba Change the characters color periodically e Use Bright colors with little difference in luminance Cycle Change the characters color and background color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME 02348 20 30 e Every 30 minutes change the characters with movement FLIGHT TIME Mae TUU FLIGHT TIME 0348 20 30 i SE 44 O2348 20 30 Stepi Step3 e All area display Moving image together with Logo periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours in use e The best way to protect your monitor from Image retention is to turn Power off or set your PC or System to operate a Screen Saver program when you are not using it Also Warranty service will be limited based on instruction guide A
84. ual Red Green Blue color balance MENU ENTER Picture gt gt gt ENTER Color Control Adjusting the LCD Display Note If you adjust the picture by using the Color Control function Color Tone will turn to the Custom mode Red MENU ENTER Picture ENTER Color Control ENTER 5 Red 4 ENTER Green MENU ENTER Picture ENTER Color Control gt ENTER Green 4 ENTER Blue MENU ENTER Picture ENTER Color Control gt T5 ENTER f Blue ENTER Color Temp Li MENU ENTER Picture gt gt ENTER Color Temp 4 ENTER Color Temp 7 5000K k Adjust Color Temp is a measure of the warmth of the image colors Note This function is only enabled if the Color Tone is set to Off Image Lock Coarse Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Available in PC mode only MENU ENTER Picture gt ENTER Image Lock MENU ENTER Picture
85. ub PC mode Analog PC 7 DVI PC HDMI IN DVI PC Video Con nection Terminal Using a DVI Cable DVI D to DVI D DVI mode Digital PC Introduction O pc OUT 5V 1 5A Connect this to the POWER connector of a TV tuner box or network box Make sure to use connecting DC OUT terminal to the authorized TV Tuner Box SBB DT AN Otherwise this may result in damage to the prod uct OD avin VIDEO VIDEO Connection Termi nal Connect the VIDEO terminal of your monitor to the video output terminal of the external device using a VIDEO cable 10 AV AUDIO IN L AUDIO R LCD Display Audio Connection Terminal Input OD AUDIO OUT L AUDIO R LCD Dis play Audio Connection Terminal Output BNC COMPONENT OUTTR PR G Y B PB H V BNC Component Connection Terminal Out put BNC Analog PC Connection connecting the R G B H V ports Component Connection connecting the PR Y PB ports BNC COMPONENT IN R PR G Y B PB H VI BNC Component Connection Terminal Input Introduction Kensington Lock The Kensington Lock is a device used to physi cally fix the system when using it in a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased se
86. uded with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button GN SAMSUNG monitor installer Select the display sdapster on Which you vert lo intel te monilis EDH 9520 Flug and Pim Mori Sele the mordar ahich you wari bo install 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software pou ane installing for this hardere Samsung sasa har not passed Windows Logo testing to wenly ite compahbdiy wth Windows XP Tell mag why the besteg is important Continuing your installahon of this software may impair or destabilize the comect operation of your system either immediately of in the future Microsoft strongly recommends that pou stop this installation now and contact the hardware vendor for software that haz passed Windows Logo testing Continue Arpwap Using the Software Note This monitor driver is under certifying MS logo and this installation d
87. ull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15 Make sure to use the top center and not the left or the right side of the product to adjust the angle Connections Connecting a Computer sing a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connect the power cord for your LCD Display to the power port on the back of the LCD Display Turn on the power switch There are 2 ways to connect the D sub to your LCD Display Choose one of the following Using the D sub Analog connector on the video card e Connect the D sub to the 15 pin RGB port on the back of your LCD Display and the 15 pin D sub Port on the computer lt Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI port on the back of your LCD Display and the DVI port on the computer Connections Using the BNC Analog connector on the video card e Connect the BNC Cable to the BN
88. ween the BNC COMPONENT IN Pr Y Pp port on the LCD Display and the Pr Y Pg jacks on the Set Top Box 2 Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Display and the AUDIO OUT jacks on the Set Top Box Note e Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the LCD Display or on the remote control Connections Note e For an explanation of Component video see your Set Top Box owner s manual Connecting Using a HDMI Cable iu Note Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using the HDMI cable e You cannot connect a PC to the HDMI terminal Connecting Using a DVI to HDMI Cable Note e Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable e Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the DVI PC HDMI AUDIO IN terminal of the LCD Display Connecting to an Audio System AUX OE o OR Connections Note e Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT L AUDIO R on LCD Display Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM incl

Samsung 320MP 32" HD-Ready Black LCD TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 320MP 32&quot; HD-Ready Black LCD TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 320MP 32" HD-Ready Black LCD TV