Home

CyberPower Value 1200E

1. berPower Reliability Quality Value Cy Value 1200E GP 1500E GP 2200E GP User s Manual K01 0000142 00 IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries Please read and follow all instructions carefully during installation and operation of the unit Read this manual thoroughly before attempting to unpack install or operate CAUTION The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker protection DO NOT plug the UPS into an outlet that is not grounded If you need to de energize this equipment turn off and unplug the UPS CAUTION DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT CyberPower Systems does not sell products for life support or medical applications DO NOT use in any circumstance that would affect the operation or safety of any life support equipment with any medical applications or patient care CAUTION The battery can energize hazardous live parts inside even when the AC input power is disconnected CAUTION To prevent the risk of fire or electric shock install in a temperature and humidity controlled indoor area free of conductive contaminants Please see specifications for acceptable temperature and humidity range CAUTION To reduce the risk of electric shock do not remove the cover except to service the battery There are no us
2. wall outlet Make sure the wall branch outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical demands e g air conditioner refrigerator copier etc Avoid using extension cords Depress the power switch to turn the unit on The power on indicator light will illuminate and the unit will beep If an overload is detected an audible alarm will sound and the unit will emit one long beep To correct this turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets Wait 10 seconds Make sure the circuit breaker is depressed and then turn the UPS on To maintain optimal battery charge leave the UPS plugged into an AC outlet at all times To store your UPS for an extended period cover it and store with the battery fully charged Recharge the battery every three months to ensure battery life BASIC OPERATION FRONT PANEL DESCRIPTION 1 Power On Off Switch Press the power switch to turn the UPS ON or OFF 2 LCD Function Selected Switch Press the LCD function selected switch to know the UPS status REAR PANEL DESCRIPTION 1 AC Inlet Connect to utility power through the input power cord 2 Input Circuit Breaker The Circuit Breaker provides optimal overload protection 3 AC outlet The UPS provides 6 outlets for connected equipment to insure temporary uninterrupted operation during a power failure and against surges and spi
3. not connected PowerPanel Personal Edition is inactive The unit is not providing battery power Recharge the battery by leaving the UPS plugged in Contact CyberPower Systems about replacement batteries at service cpsww com au Turn the UPS off Wait 10 seconds and then turn the UPS on The unit must be connected to a 220 240V 50 60Hz outlet Contact CyberPower Systems about replacement batteries at service cpsww com au Contact CyberPower Systems at service cpsww com au Turn the UPS off and unplug at least one piece of equipment Wait 10 seconds reset the circuit breaker by depressing the button and then turn the UPS on Allow the unit to recharge for at least 4 hours Contact CyberPower Systems at service cpsww com au Connect the serial USB cable to the UPS unit and an open serial port on the back of the computer You must use the cable that came with the unit Shutdown your computer and turn the UPS off Wait 10 seconds and turn the UPS back on This should reset the unit Additional troubleshooting information can be found at www cpsww com au For more information visit www copsww com au or contact CyberPower Systems B V Flight Forum 3545 5657DW Eindhoven The Netherlands Tel 31 40 2348170 E MAIL sales cpsww com au Entire contents copyright 2009 CyberPower Systems B V All rights reserved Reproduction in whole or in part without permission is prohibited PowerPanel and P
4. are exceeded an overload condition may occur and cause the UPS unit to shut down or the fuse blow 2 There are many factors that can affect the amount of power that your computer system will require For optimal system performance keep the load below 80 of the unit s rated capacity HARDWARE INSTALLATION GUIDE 1 Your new UPS may be used immediately upon receipt However recharging the battery for at least 8 hours is recommended to ensure that the battery s maximum charge capacity is achieved Charge loss may occur during shipping and storage To recharge the battery simply leave the unit plugged into an AC outlet The unit will charge in both the on and off position 2 With the UPS unit off and unplugged connect the computer monitor and any externally powered data storage device Zip drive Jazz drive Tape drive etc into the battery power supplied outlets DO NOT plug a laser printer copier space heater vacuum paper shredder or other large electrical device into the battery power supplied outlets The power demands of these devices will overload and possibly damage the unit To protect a fax telephone modem line or network connect a telephone cable or network cable from the wall jack outlet to the IN jack of the UPS Then connect a telephone cable or network cable from the OUT jack on the UPS to the modem computer telephone fax machine or network device Plug the UPS into a 2 pole 3 wire grounded receptacle
5. er serviceable parts inside except for the battery CAUTION To avoid electrical shock turn off the unit and unplug it from the AC power source before servicing the battery or installing a computer component CAUTION DO NOT USE WITH OR NEAR AQUARIUMS To reduce the risk of fire do not use with or near aquariums Condensation from the aquarium can come in contact with metal electrical contacts and cause the machine to short out INSTALLING YOUR UPS SYSTEM UNPACKING The box should contain the following 1 UPS Unit x 1 2 IEC Power Cord x 1 3 IEC to AU Adapter Cable x 2 4 USB Cable x 1 5 Phone Cable x 1 6 User Manual x 1 7 Management Software Disk x 1 OVERVIEW The Value 1200E GP 1500E GP 2200E GP provides automatic voltage regulation for inconsistent utility power The Value 1200E GP 1500E GP 2200E GP features 910 Joules of surge protection and provides battery backup during power outages The Value 1200E GP 1500E GP 2200E GP ensures consistent power to your computer system and its included software will automatically save your open files and shut down your computer system during a utility power loss HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT 1 Ensure that the equipment plugged into the battery power supplied surge outlets does not exceed the UPS unit s rated capacity 1200VA 720W for Value 1200E GP 1500VA 900W for Value 1500E GP 2200VA 1320W for Value 2200E GP If the rated unit capacities
6. evelopment of green products and has adopted Green practices throughout its business including membership in Climate Savers Computing Initiative CSCI accordance with the Restriction on Hazardous Substances ROHS Waste Electrical and Electronic Equipment WEEE protocols as well as ISO 14001 and IECQ QC080000 CyberPower pledges to provide the advanced energy solution for the environment and become a leading eco friendly organization in the UPS industry Reduce Energy Cost with GreenPower UPS Technology ENERGY SAVING TECHNOLOG CyberPower s goal is not only to provide eco friendly products but also to bring the best value for consumers The advanced energy saving design improves the operating_efficiency and eliminates waste energy consumption As a result consumers will enjoy significant energy cost savings with the adoption of GreenPower UPS technology TROUBLESHOOTING Possible Cause Solution Battery not fully charged The UPS does not perform expected runtime Battery is slightly worn out The on off switch is designed to prevent damage by rapidly turning it off and on The unit is not connected to an AC outlet The UPS will not turn on The battery is worn out Mechanical problem Circuit breaker has tripped due to an overload Outlets do not provide power to equipment Batteries are discharged Unit has been damaged by a surge or spike The serial USB cable is
7. kes 4 Serial Port to PC This port allows connection and communication from the DB9Y serial on the computer to the UPS unit The UPS communicates its status to the PowerPanel Personal Edition software N 5 USB Port to PC This port allows connection and communication from the USB port on the computer to the UPS unit The UPS communicates its status to the PowerPanel Personal Edition software NOTE Only one of these two ports can be used as communication and control of the UPS unit at one time 6 Communication Protection Ports RJ11 RJ45 Communication protection ports will protect any standard modem fax telephone line or network cable TECHNICAL SPECIFICATIONS Value 1200E GP Value 1500E GP Value 2200E GP 1200 1500 2200 Ooo 7 S 1320 160 265Vac 47 63Hz Auto Sensing Boost 200V Capacity VA Capacity Watts Input Voltage Range Frequency Range AVR lt On Battery Output Voltage On Battery Output Frequency Transfer Time Overload Protection Simulated Sine Wave at 230Vac 10 50 60HZz 1 4ms Typical On Utility Circuit Breaker amp Internal Current Limiting On Battery Internal Current Limiting Surge Protection Lightning Surge Protection Operating Temperature Operating Relative Humidity Physical Total of UPS outlets Maximum Dimensions LxWxH Weight kg Batterie Sealed Maintenance Free Lead Acid Battery Typical Recharge Time User Replaceable Status Indicators Indicato
8. owerPanel Plus are trademarks of CyberPower ez A Systems USA Inc
9. rs Audible Alarms Communication PowerPanel Personal Edition Software Management Auto Charger Auto Restart Yes 0 C to 40 C 0 to 90 non condensing 6 IEC 320 C13 326x140x180mm 12V 7Ah x2 12V 8 5Ah x2 8 hours Yes 12 7 Ql 12V 9Ah x2 Power On Using Battery On Battery Low Battery Overload Windows 7 Vista XP 2000 Server 2003 Linux DEFINITIONS FOR ILLUMINATED LCD INDICATORS LCD INDICATION LOAD BATT CAP INPUT OUTPUT RUN_TIME V Q m w So coe amp EEL Line mode UPS Status Display Capacity Display Digital Value Display oth Return O OvJ xX xX V Oo S Press gt 3sec y x y x Sound Disable Press gt 3sec again V X X X Sound Enable Overload V xX V V Illuminated X Not Illuminated Either Battery mode UPS Status Display Capacity Display Digital Value Display f Load Battery Input Output Run ejm K a e e St tne ch g mta o X OT V o X X OV EV S A vf TV s s Select SW X CAN j n pth V Sth Retum X V f xXx x vyv f Press gt 3sec Sound Disable y V EJE Ss ee Press gt 3sec again X V X X Sound Enable Da e e l l a o a a a Overload X V Iv V Illuminated X Not Illuminated gt Either CYBERPOWER GREENPOWER UPS TECHNOLOGY CyberPower s Green Commitment CyberPower is dedicated to the d

CyberPower Value 1200E

Contents

Download Pdf Manuals

Related Search

Related Contents