Philips AZ5160 VCD CD Soundmachine
Contents
1. BEETHO MP3 CD MP3 JI 011001 01 BEETHO Z MP3 02 BRAHMOB1 MP3 E 0210021 93 BRAHMAD2 MP3 C 031003 17 CASSETTE RECORDER ys i 6u3 CASSETTE PLAYBACK 7 Set the source selector to TAPE OFF 2 Press W A to open the cassette holder 3 Insert a recorded cassette 4 Press and playback will start 5 Adjust the sound using the VOLUME and DBB controls 6 For brief interruptions press I Press I again to resume playback 7 By pressing lt 4 or fast winding of the tape is possible in both directions 8 To stop playback press W A The keys are automatically released at the end of the tape 9 Set the source selector to TAPE OFF position with the cassette keys released to switch off the set Note During playback the keys are automatically released at the end of a tape and the set is switched off unless PAUSE mode has been activated During fast forwarding rewinding the keys will not be released at the end of a tape lo switch off the set make sure the cassette keys are also released CASSETTE RECORDING General information on cassette recording e Recording is permissible insofar as copyright or other rights of third parties are not infringed e This deck is not suitable for recording on CHROME IEC IT or METAL IEC IV type cassettes For recording you should use NORMAL type cassettes IEC I on2. A B repeat This feature is applicable to audio CD VCD MP3 CD offering to play a certain scene or passage of the disc repeatedly 15 CD VCD MP3 CD ysijbuy VIDEO CD 7 Press A B on the remote control during playback to mark the start point of the chosen scene or passage REPEAT A will appear on the screen 2 Press A B again to mark the end of the chosen scene or passage REPEAT AB will appear on the screen The selected scene or passage will start playing repeatedly 3 Press A B once more to return to normal playback REPEAT AB will disappear from the display Notes You can also cancel A B repeat by pressing a or i or on the remote control A B repeat marking can cross from one track to another But for VCD 2 0 you are only able to set the A B repeat marking within the same track Resume e In stop mode press Resume on the remote control to start playback again from where you have stopped Note Resume will not be available if you have changed the disc opened the disc tray or disconnected the system from the power supply View This feature allows you to scan through a VCD for a quick review In stop mode press View on the remote control to go to disc view function On TV screen up to 9 pictures will be displayed If a menu consists of more than one page press 4 Or gt or on the remote control to view the previous next page
3. 7 Set the source selector to CD 2 Lift to open the CD door TF will be displayed 3 Insert a disc with the label side facing up 4 Close the CD door The total number of tracks of the disc appear on the display 2 will be displayed if no disc is inserted or error in CD operation For MP3 CD only The total track number xxx and album number Hx x will be displayed interchangeably English CD VCD MP3 CD ysijbuy On TV screen the album list is displayed max 10 lines per page The current selected music is highlighted Notes To ensure good system performance wait until the disc completely reads before proceeding For MP3 CD the disc reading time may exceed 1 minute due to the large number of songs compiled into one disc PLAYING A NORMAL DISC 1 Press PAI to start playback The track number of the current track and appear on the display e To interrupt playback press MI P will disappear and the current track number will start flashing e To resume playback press PI again 2 To stop playback press IM SELECTING A DESIRED TRACK PASSAGE To select a desired track e Press ma or gt on the set repeatedly or use digits O 9 buttons or on the remote control until the desired track appears on the display e f playback is stopped press MI to start playback To search f
4. The first several seconds of each track will be played To exit review mode press digits 0 9 to play the desired track or PAI to play the current selected track 2 In playback mode press View on the remote control to go to track view function press me oro or on the remote control to select the track On TV screen up to 9 pictures within the track will be displayed The first several seconds of each picture will be played To exit review mode press digits 0 9 to play the desired position within the track or PHI to play the current selected position Note If the disc is AVCD disc and there re no video tracks on the same viewed page it cannot use the direct digital key to play the track Return e Press Return on the remote control to return to the previous VCD disc MENU level It is functional only for Video CD when PBC is switched on Audio You can use It to select the different audio modes e Press Audio on the remote control repeatedly to select the following modes gt gt 9 on the LCD represents channel left channel right dual channel on a bilingual VCD or mono left mono right stereo on single language VCD 16 CD VCD MP3 CD PLAYING A MIXED MODE DISC This set can play a mixed mode disc mixture of audio CD and MP3 CD ir mixture of other combination may not be operated normally tracks of CD mode or MP3 mode will normally be played in order
5. the CD compartment dust free To clean the dusted compartment with a soft dry cloth e The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated To clean the set use a soft slightly dampened chamois leather Do not use any cleaning agents containing alcohol ammonia benzene or abrasives as these may harm the housing Do not expose the system batteries or discs to humidity rain sand or excessive heat caused by heating equipment or direct sunlight Always keep the disc tray closed to avoid dust on the lens No objects filled with liquids such as vases shall be placed on the apparatus The apparatus shall not be exposed to dripping or splashing Adequate ventilation with a minimum gap of 15 cm between the ventilation holes and surrounding Surfaces Is necessary to prevent heat build up The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc e No naked flame sources such as lighted candles should be placed on the apparatus CD PLAYER AND CD HANDLING e The lens of the CD player should never be touched e Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to cloud over Playing a CD is then not possible Do not attempt to clean the lens but leave the set in a warm environment until the moisture evapo
6. the TV with maximum 16 volume levels PBC PLAYBACK CONTROL to switch on or off PBC mode for VCD version 2 0 only Digits 0 9 for CD VCD MP3 CD to select a track number numbers consisting more than 2 figures must be keyed in within 2 seconds Return to return to the previous MENU level during playback for VCD with PBC on 27 Resume to resume playback in stop mode S Rep Yepatl A B SHUFF O 0 39 Y Y Y ProG Slow View Mute D SS PHILIPS POWER SUPPLY IMPORTANT e The system is equipped with a Voltage Selector set the VOLTAGE SELECTOR located in the battery compartment to match the local power line For best CD MP3 CD VCD playback please plug in your set to an AC power supply where convenient e If operated in DC mode see below approximate playtime Playtime is also varied from different brand batteries DOTE Alkaline approximate 9 hrs approximate 45 minutes e The CD part of this system also serves as a Video CD player if you connect it to your TV set e Before viewing the Video CD ensure that the set is switched to corresponding PAL or NTSC system of your TV set exception Multi system TV BATTERIES NOT SUPPLIED Whenever convenient use the mains supply if you want to conserve battery life The battery supply will be switched off when the set is connected to the mains Make sure you remove the plug from the set and w
7. 28kbps sampling frequency at 44 1kHz to achieve CD like music playback quality since downloading MP3 files from the Internet ripping songs from your own legal CD s and burning MP3 songs onto a CD R are a delicate process the quality of a MP3 song may vary by these process subsequently making a MP3 CD may not be entirely perfect As a result of the above imperfection you may experience an occasional skip while listening or an occasional delay in accessing previous next title to MP3 CD s This is considered to be normal A comparison chart is enclosed as below Sound Bit Approximate Approximate total Comment Quality Rate Reduction Ratio MP3 CD time MW radio 32kbps 40 1 40 hrs sound quality significantly FM radio 64 kbps 20 1 20 hrs affected not recommended Near CD 96 kbps 15 1 15 hrs Balanced sound quality CD like 128 kbps 10 1 10 hrs compression rate CD 256 kbps Det 5 hrs Compression rate low CD 320 kbps ae 3 hrs suggest to play CDs instead CONTROLS Congratulations on your purchase and welcome to Philips To fully benifit from the support that Philips offers register your product at www philips com welcome TOP AND FRONT PANEL 1 Source selector power on off switch and to select source of sound source CD TUNER TAPE 2 VOLUME to adjust volume level 3 DBB Dynamic Bass Boost for a more vivid bass response 4 LIFT
8. OPEN to open the CD door 5 Cassette keys Il to interrupt recording or playback E A to stop the tape and to open the cassette holder 44 gt gt to fast wind rewind the tape lt to start playback to start recording 6 LCD Display to show the VCD MP3 functions and disc status 7 IR infrared sensor for remote control PROG for CD CD MP3 CD to programme disc tracks 9 REPEAT to repeat a track programme entire CD playback BAND to select FM or MW waveband BACK PANEL an TUNING to tune to radio stations 12 PAI to start or interrupt CD playback E to stop playback e 1 to skip or search a passage or a track 43 Telescopic aerial to improve FM radio reception VIDEO AUDIO OUT connect to the TV or VCR VIDEO AUDIO IN 45 AC MAINS socket for mains lead Battery door to open the battery compartment a7 Voltage Selector to adjust and match the local voltage 110 220V before plugging in the Set IMPORTANT PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED IN THE BATTERY COMPARTMENT AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY FOR COUNTRIES THAT OPERATE AT 110V 127V PLEASE ADJUST TO 110V 127V BEFORE YOU SWITCH ON THE SYSTEM SUPPLIED ACCESSORIES Remote Control 1 pc Mans GOPA A sn 1 pc Audio Video Cable 1 pc REMOTE CONTROL 1 OSD to switch on off the
9. VCD MP3 CD Soundmachine AZ5160 Register your product and get support at www philips com welcome User manual PHILIPS Se 000 Z SW K y English MP3 General Information 6 COMO nr ne 7 Remote Controls 7 8 POWER SUDO Veter crete 9 10 General Operation Radio 10 CD VCD MP3 CD Re ee een ee E 11 17 Cassette recorder 18 19 M ta 19 20 IES 21 English MP3 General Information ys i 6u3 Dear Customer Thank you for buying the Philips MP3 CD Soundmachine Your great new acquisition will allow you to listen to up to 10 hours of CD like quality music using the innovative new music compression technology MP3 MP3 technology MP3 is short for MPEG1 Layer 3 encoding and decoding technology a very powerful encoding algorithm with which you can shrink down the orginal digital audio sound data with a factor of up to 10 without losing significant sound quality Recording and Playback It is recommended to set your recording bit rate to 1
10. all outlet before inserting batteries Batteries 7 Open the battery compartment and insert six batteries type R14 UM2 or C cells preferably alkaline with the correct PH y LI PS Q polarity as indicated by the and symbols inside the compartment 6 x 1 5V R14 UM2 C CELL Remote control tld 7 Open the battery door and insert two batteries thf type AAA R03 or UMA preferably alkaline 2 Replace the compartment door making sure the batteries are firmly and correctly in place 3 Remove the batteries if they are exhausted or If they will not be used for a long period The incorrect use of batteries can cause electrolyte leakage and will corrode the compartment Or cause the batteries to burst Therefore Do not mix battery types e g alkaline with zinc carbonate When inserting new batteries replace all at the same time Remove the batteries if the set is not to be used for a long time Note The battery supply is switched off when the set is connected to the mains TV screen is disabled during CD MP3 CD playing if your AZ5160 is battery powered Batteries contain chemical substances so they should be disposed of properly English GENERAL OPERATION ys i 6u3 MAINS 1 Check if the mains voltage as shown on the type plate on the bottom of the set corresponds to your local mains voltage If it does not consult your
11. dealer or service Organization 2 Connect the mains lead to the AC MAINS socket and the wall socket The set is now ready for use 3 To switch off the mains supply completely pull the mains plug out of the wall socket gt Disconnect the mains lead when you change over to battery supply or to protect the set during heavy thunderstorms The type plate is located on the bottom of the set GENERAL OPERATION 7 To switch on the set adjust the source selector 2 Adjust the sound using the VOLUME and DBB controls 3 To switch off the set adjust the source selector to the TAPE OFF position with the cassette keys released RADIO RECEPTION 1 Set the source selector to TUNER 2 Adjust BAND to FM or MW as your desired band 3 Adjust the sound using the VOLUME controls and the DBB switch 4 Tune to a radio station using the TUNING knob For FM pull out the telescopic aerial To improve FM reception incline and turn the aerial Reduce its length if the FM signal is too strong very close to a transmitter For MW the set is provided with a built in aerial so the telescopic aerial is not needed Direct the aerial by turning the whole set 5 To switch off set the source selector to the TAPE OFF position with the cassette keys released CD VCD MP3 CD CAUTION Use of controls or adjustments or performance of procedures other than here
12. e a readable disc or correct recorded format MP3 CD Connect the cable between the system and TV Change the system to the respective PAL or NTSC setting If the signal is too weak adjust the antenna for better reception Increase the distance between the Receiver and your TV or VCR Clean deck parts see Maintenance Use only NORMAL IEC tape Apply a piece of adhesive tape over the missing tab space Slide the source sector to TAPE OFF Remove and reconnect the AC power plug for 30 seconds and switch on the set again Adjust the volume Make sure the MP3 CD was recorded within 32 320 kbps 128kbps preferably with sampling frequencies at 8 48 kHz 44 1kHz preferably Reduce the distance between the remote control and the system Insert the batteries with their polarities signs aligned as indicated Replace the batteries Point the remote control in the direction of the system s IR sensor 21 ys i 6u3 PHILIPS Meet Philips at the Internet http www philips com OY aG AZ5160 CLASS 1 LASER PRODUCT Printed in China PDCC ZH ZC 0731
13. in may result in hazardous radiation exposure or other unsafe operation Environmental information All unnecessary packaging material has been omitted We have done our utmost to make the packaging easily separable into three mono materials cardboard polystyrene and plastic Your set consists of materials which can be recycled if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment DISCS FOR PLAYBACK This set can play all digital audio CD video CD finalised digital audio CD Recordable CDR discs and finalised digital audio CD Rewritable CDRW discs Support following MP3 CD formats COMPACT compact e ISO 9660 or ISO 9660 Joliet format Max 30 characters e Max Track number is 400 os e Max nested directory is 8 levels e The max album number is 99 COMPACT canner e The max MP3 programme track number is 20 e The max length of each track is 99 minutes 59 seconds DIGITAL AUDIO e The player can play mixed mode disc of CD MP3 CD ReWritable e Supported VBR bit rate e Supported sampling frequencies for MP3 disc 8 kHz to 48 kHz 44 1kHz preferably e Supported bit rates of MP3 disc are 32 320 kbps 128 kbps preferably Following formats are not supported e The files like WMA AAC DLF M3U PLS MP3 PRO and JPEG CD e The non session closed discs LOADING A DISC
14. ode press PROG or ProG on remote control to enter programme setting PROG will flash on the display 2 Press digits 0 9 or on the remote control or amp on the set to select the desired track 3 Press PROG to store the select track The number 1 indicates a programme sequence Xxx indicates the track number PROG will remain on the display e Repeat steps 2 to 3 to store other tracks 4 Press MW to end programme setting e Press PROG or ProG on remote control in stop mode to review the programme sequence 5 Press PI to play the programmed tracks e f you press REPEAT on the set or Rep RepAll on the remote control during programme playback the current track or all programmed tracks will be played repeatedly REPEAT REPEAT ALL icon and PROG will appear on the display 6 Press M in stop mode to clear the programme PROG will disappear from the display Notes The programming is automatically cleared as soon as the CD compartment is opened The function of programme setting is disabled in PLAY PAUSE mode For MP3 CD only 1 In stop mode press PROG on the set or ProG on the remote control to enter programme setting PROG will start flashing On TV screen PROG program list 5 lines per page will be displayed 2 Press digits 0 9 on the remote control or AL to select the desired album 3 Press PROG to store the selected album The number Hx x represen
15. ogramme starts automatically from the beginning of the programme 6 For brief interruptions press I To resume recording press Ill again 7 To stop recording press W A To select and record a particular passage within a track 1 Press and hold e or on the set to select a passage 2 Put the CD player in position at the selected passage Recording will start from this exact point when you press 3 Press PI to start recording TAPE DECK MAINTENANCE To ensure a good recording and playback of the tape deck clean parts A B and C show in the diagram below after approx 50 hours of operation or on average once a month Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck e Open the cassette holder by pressing W A e Press and clean the rubber pressure rollers e Press Mand clean the magnetic heads A and also the capstans B e After cleaning press WA Cleaning of the heads can also be done by playing a cleaning cassette through once MAINTENANCE ys i 6u3 PRECAUTIONS 8 GENERAL MAINTENANCE e Place the set on a hard flat surface so that the system does not tilt e Where the Mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Always shut the CD door to keep
16. on screen display on the TV screen 2 RepAll for CD VCD MP3 CD to repeat a whole disc 3 Rep for MP3 CD ves to repeat a track or the whole disc TOF GDNGB sus to repeat a disc track or the whole disc 4 ProG for CD VCD MP3 CD to programme disc tracks ZOOM for VCD only serias to zoom in or zoom out picture 6 Slow to watch a VCD at a slower speed for VCD operation only 7 A B to playback a certain scene or passage repeatedly for CD VCD MP3 operation SHUFF When in CD VCD MP3 mode press to start or stop shuffle play mode for VCD only available in PBC off mode 9 Mute to switch playback sound off and on GoTo to start playback at any chosen time on the disc for CD VCD operation only and PBC mode is off REMOTE CONTROL ys i 6u3 11 View to scan through a VCD with 9 pictures display on TV screen 42 PAI to start or interrupt playback Id D for MP3 CD only to select previous next title for CD VCD to search backward forward track 4 for CD VCD MP3 CD to search back or forward 43 Audio to select channel left channel right stereo sound or to select a language in a bilingual VCD for VCD operation only NTSC PAL to select the video output for NTSC or PAL system 5 AL for MP3 CD only to select the previous next album E to stop playback or to clear a programme a7 TV VOL to adjust volume level on
17. or a particular passage during playback 1 Press and hold or on the set During searching the volume will be muted 2 When you recognize the passage you want release the e or button Normal playback resumes For MP3 CD only To select a desired album e On the remote control press AL or AL until the desired album number appears on the display gt AK will be displayed On TV screen the selected album will be highlighted To select a desired track e Press ma or on the set repeatedly or on the remote control to select a desired track from the current album gt XxxX will be displayed On TV screen the selected track will be highlighted e Use the digital keys on the remote control to select the track under current album directly To select and playback another track during playback mode 1 Press ma or repeatedly to select another track The new selected track will show on the display screen and TV screen and playback continuously For VCD only e Either press lt 4 or gt gt on the remote control repeatedly to select fast search speed x1 x2 x3 or x4 or press amp hold m or gt on the set for 1 second and then release 144 or to select fast search speed x1 Repeat this step to select other speed x2 x3 x4 CD VCD MP3 CD PROGRAMMING TRACKS Up to 20 tracks can be stored in the memory in any order E For CD VCD only a 1 In stop m
18. rates e Use only Digital Audio CDs e To take a CD out of its box press the centre spindle while lifting the CD Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust e To clean the CD wipe in a straight line from the centre towards the edge using a soft lint free cloth Do not use cleaning agents as they may damage the disc e Never write on a CD or attach stickers to it 20 TROUBLESHOOTING If a fault occurs first check the points listed below before taking the set for repair If you are unable to remedy a problem by following these hints consult your dealer or service centre a WARNING Do not open the set as there is a risk of electric shock Under no circumstances should you try to repair the set yourself as this will iT invalidate the guarantee C Problem Solution CD VCD OPERATION iL is displayed nsert a disc No picture on TV screen No colour on TV RADIO RECEPTION Radio reception is poor TAPE OPERATION RECORDING Recording or playback cannot be made GENERAL The system does not react when buttons pressed set does not work no display on LCD Sound cannot be heard or is of poor quality The remote control does not function properly Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc see Maintenance Us
19. sequence directly 1 Press digits 0 9 on the remote control to select your choice The VCD starts playing the selected sequence automatically 2 Press Return on the remote control to go back to the Menu Note If a menu consists of more than one page press aa w or gt on the remote control to go through the pages Switching off PBC e Press PBC On TV screen PBC OFF will be displayed shortly Notes The menu structure depends on the programme stored on the VCD Please refer to the information supplied with the disc Pause 1 During playback press PI to have a still picture on the TV screen The sound will be muted On TV screen PAUSE will be displayed 2 Press PII again to continue playback Goto 1 Press GOTO on the remote control On TV screen GOTO will be displayed 2 Press digits 0 9 on the remote control to key in the disc time from which you want the disc to begin playback Notes The disc time entered should not be greater than the total disc time Goto mode is not available whenever PBC mode is switched on Slow 7 Press Slow on the remote control to watch a VCD at a slower speed There are 4 types of slow modes to select The sound will be muted On TV screen SLOW 1 2 SLOW 1 4 SLOW 1 8 or SLOW 1 16 will be displayed 2 To resume playback at normal speed press Slow repeatedly until PLAY appears on the TV screen or press PII
20. ts the album number 4 Press 144 gt i repeatedly on the set or digits 0 9 or on the remote control to select the desired TRACK for programming 5 Press PROG to store the selected track PROG will remain flashing on the display e Repeat steps 2 to 5 to store other desired album and track 6 Press M to end programme setting e To review programme press PROG repeatedly in stop mode FX Xx indicates a programme sequence fH x indicates an album number xxx indicates a track number 7 Press PAI to start programme playback You can press ma or A on the remote control to select the programmed track to play 8 Press W once to stop programme playback or twice to clear the programme CD VCD MP3 CD ysijbuy SHUFFLE You can play all the tracks in random order 7 During playing pause or stop mode press SHUFF to enable SHUFFLE play mode SHUFFLE will appear on the display 2 To exit shuffle mode press SHUFF again or M SHUFFLE will disappear from the display Note If the Shuffle function is enabled then the Repeat function is set on it will disable the Shuffle play mode The shuffle function is not available in the programme playback REPEAT You can play the current track or the whole disc repeatedly 1 During CD VCD MP3 CD playing or pause mode press REPEAT on the set or Rep RepAll on the remote control REPEAT icon to repeat the c
21. urrent track REPEAT ALL icon all to repeat the whole disc 2 To exit the repeat mode press REPEAT on the set or Rep RepAll on the remote control until the REPEAT REPEAT ALL icon disappears from the display Notes If the Repeat function is enabled then the Shuffle function is set on it will disable all the Repeat play modes If the Repeat function is enabled then the Stop button is pressed it will disable all the Repeat play modes VIDEO CD Adjusting the TV System Before viewing the Video CD ensure that the set is switched to corresponding PAL or NTSC system of your TV set exception Multi system TV 7 On the remote control press NTSC PAL to switch between NTSC and PAL TV system OSD On Screen Display If you insert VCD CD your TV screen will serve as an additional display for messages e g PLAY STOP and information stored on the VCD CD e Press OSD on the remote control to select viewing various information The current track and current elapsed time in the track disc appear on the display CD VCD MP3 CD VIDEO CD Playing a Video CD with PBC E PBC Playback Control is a predefined play sequence stored on the VCD PBC feature is only a available for 2 0 version VCD 1 Switch on the TV then insert a VCD with PBC n 2 Menu appears on the TV screen If not press PBC on the remote control to display Menu If the menu consists of a list of titles you can select a
22. which the tabs have not been broken e Check and tighten slack tape before use with a pencil to avoid Jamming the deck machanism e The recording level is set automatically Note No recording will take place during the 7 seconds in the beginning of the tape e To prevent the accidental erasure of a recording keep the cassette side to be safeguarded in front of you and break out the left tab Recording on this side is no longer possible The making of unauthorized copies of copy protected material including computer programmes files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such Be responsible purposes Respect copyrights 18 CASSETTE RECORDER RECORDING FROM THE RADIO 7 Set the source selector to TUNER 2 Adjust BAND to FM or MW 3 Tune to the desired radio station using the TUNING knob 4 Press W A to open the cassette holder 5 Insert a blank tape 6 Press to start recording 7 For brief interruptions press I To resume recording press I again 8 lo stop recording press WA SYNCHRO START CD RECORDING 7 Set the source selector to CD 2 Insert a CD and if desired programme track numbers 3 Press WA to open the cassette holder 4 Insert a blank cassette 5 Press to start recording Playing of the CD pr
Download Pdf Manuals
Related Search