JBL HARMAN MULTIMEDIA ON TIME 200ID
Contents
1. Connectthe equipment into an outlet on a circuit different from that to which the receiver is connected Consultthe dealer or an experienced radio TV technician for help Any special accessories needed for compliance must be specified in the instruction manual MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES The normal function of the product may be disturbed by strong electromagnetic interference If so simply reset the product to resume normal operation by following the instruction manual In case the function could not resume please use the product in another location CAUTION WARNING T0 PREVENT FIRE OR IMPORTANT ELECTRICAL SHOCK HAZARD DO NOT EXPOSE THE APPROPRIATE ADAPTER MUST BE INSTALLED BEFORE urbis cunas THIS PRODUCT TO RAIN OR MOISTURE INSERTING YOUR iPod INTO THE JBL PRODUCT MAKE SURE FLASH AND ARROWHEAD CAUTION TO REDUCE POINT WITHIN THAT THE CONNECTOR FOR THE iPod IS PROPERLY ALIGNED M Nocnewovecoves no emen WARNING THE APPARATUS SHOULD WITH THE JBL PRODUCT S CONNECTOR WHEN INSTALLING WARNING SIGN USER SERVICEABLE PARTS M ALERTING YOU NOT BE EXPOSED TO DRIPPING OR SPLASHING YOUR iPod FAILURE TO DO SO MAY CAUSE PERMANENT ALERTING YOU INSIDE REFER SERVICING I sTRUCTIONS AND NO OBJECTS FILLED WITH LIQUID SUCH AS DAMAGE TO THE CONNECTOR FOR THE iPod RENDERING VOLTAGEINSIDE f PERSONNEL coww ws VASES SHOULD BE PLACED2. Industries Incorporated iPod Apple and iTunes are trademarks of Apple Inc registered in the U S and other countries Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards JBL est une marque commerciale de Harman International Industries Incorporated d pos e aux tats Unis et ou dans d autres pays JBL On Time est une marque commerciale de Harman International Industries Incorporated iPod Apple et iTunes sont des marques commerciales de Apple Inc d pos es aux tats Unis et dans d autres pays Made for iPod signifie que le dispositif lectronique a t sp cialement concu pour se connecter l iPod et qu il est certifi par le d veloppeur comme conforme aux normes de performance Apple Apple n est pas responsable du fonctionnement de ce dispositif ou de sa conformit avec les normes de s curit ou r glementaires Harman Consumer Group Inc 8500 Balboa Boulevard Northridge CA 91329 USA 516 255 4525 USA only www jbl com 2008 Harman International Industries Incorporated All rights reserved Tous droits r serv s Document Number 950 0232 001 REV C H A Harman International Company
3. to confirm Minute field becomes highlighted Use Up Down arrows to set Minutes Press Enter to confirm AM PM field becomes highlighted Use Up Down arrows to set AM PM Press Enter to confirm Use Up Down arrows to set Day of Week Weekdays Weekends Everyday or One Time Press Enter to confirm 8 Use Up Down arrows to set Alarm source Press Enter to confirm Alarm is set Note During alarm setting if there is no user input for 2 seconds display will return to the Now Playing screen Press any one ofthe e Enter Up Down arrows or Menu Up Level to return to setting selection tUse this same procedure to modify a previously set Alarm D Enable Disable a Set Alarm Press Menu Up Level at any screen to display the Top Menu may require repeated presses depending on which menu state the unit was previously in dci 2 Use Up Down arrows to highlight Alarm Press Enter to confirm Select Up or press Alarm to go directly to the Alarm menu 3 Use Up Down arrows to highlight Alarm Press Alarm to enable disable the alarm An icon will be displayed on the left when the alarm is enabled and the alarm will sound at the set time Mo el Waking to the iPod blan 1 Use the steps under Alarm Setting and choose iPod as the source 2 On your iPod choose the song you would like to awaken to and press Play 3 Set the volume level on the JBL On Time 20010 unit 4 Put your iPod to sleep by holding down the Play Pause button old
4. unplugging audio cables from the source device s headphones or line level output jacks it is good practice to turn off the device first This will prolong the life of your unit help protect your device from static electricity and prevent potential damage JBL ON TIME 20010 USER GUIDE FCC STATEMENT AND WARNING This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient the receiving antenna Increase the separation between the equipment and receiver
5. 25 DISPOSAL Do not dispose of this product as unsorted municipal waste Collection of such waste separately for special treatment is necessary IMPORTANT Use UMA AAA LRO3 alkaline type nonrechargeable batteries only TROUBLESHOOTING SOUND QUALITY Symptom Possible Problem Solution Note No sound from the JBL On Time 2001D unit No power to the unit Incorrect source selection Make sure the wall power outlet or power strip has power Make sure all switches for outlet power strip are on and that all switches for speaker system are on Make sure the correct source is selected choose FM radio as a source Turn up the volume Check the system with a known good source such as your iPod Connect the Aux In cable to the headphone jack on your iPod Is the display on If not power is not getting to your JBL On Time 200ID try the solutions shown No sound or weak signal from the AM FM radio Bad reception from current location Interference Reposition your JBL On Time 20010 unit until you find better reception Check surrounding area for any possible interference wrap up any excess cables If you are still getting a weak signal from AM broadcasts connect the external AM antenna to the AM antenna jack Sound comes from one side channel only iPod or audio cable is not seated properly Make sure the iPod or Aux In cable is seated all the way into the JBL On Time 20010 unit If you
6. JBL ON TIME 200 1D Pod AM FM RADIO AND SPEAKER DOCK FOR iPod not included iPod non inclus PRES Hp SS UU J c SSS _ USER GUIDE Ss SSS SSS S 58 a Nederlands 72 Italiano 44 er English 2 5 10 Deutsch 90 Espa ol 100 Dansk Japanese 114 50 20 ic LI 142 184 Suomi 170 Svenska 156 Norsk mx IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THE FOLLOWING PRECAUTIONS BEFORE USE Read these instructions heed all warnings and keep for future reference Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings a minimum distance of 10mm around the entire apparatus is required for sufficient ventilation No naked flame sources such as lighted candles should be placed on or near the apparatus Attention should be drawn to the environmental aspects of battery disposal The apparatus is to be used in moderate climates only Do not install near any heat sources such as radiators heat registers stoves or other apparatuses including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at the plugs and convenience receptacles and at the point where they exit from the apparatus Only use attachme
7. NT AUN Ws FEN _ OB Aux In DC In AMANT RE Us DOC DE WWW JBL COM 6 CONTROLS Setting the Clock 1 oF D Press Menu Up Level at any screen to display Top Menu may require repeated presses depending on which menu state the unit was previously in Use Up Down arrows to highlight Clock Press Enter to confirm Use Up Down arrows to highlight 12 hour or 24 hour format Press Enter to confirm Use Up Down arrows to set Hour Press Enter to confirm Minute field becomes highlighted Use Up Down arrows to set Minutes Press Enter to confirm AM PM field becomes highlighted 6 Use Up Down arrows to set Day of Week Press Enter to confirm The clock is set Note During clock setting if there is no user input for 2 seconds display will return to the Now Playing screen Press any one of the Enter Up Down arrows or Menu Up Level to return to setting selection Base Unit Control Navigation Power ae Volume Down ee eee Vplume Up wE 5 Alarm Menu Up Level Preset Select Down JBL ON TIME 20010 USER GUIDE Playing Music 1 Press Source button to select the source iPod AM FM Aux 2 Press button to increase volume 3 Press button to decrease volume Languages Region 1 Press the Menu Up Level button until you reach the Top Menu scr
8. ON THE APPARATUS THE iPod INOPERABLE THE PRODUCT THE PRODUCT WWW JBL COM English 4 JBL ON TIME 20010 The JBL On Time 20010 high performance loudspeaker dock and clock radio for iPod will revolutionize the way you listen to your radio use your iPod and wake from a good night s sleep The JBL On Time 200ID system is a revolution in time travel Imagine waking up to music on your favorite station or your iPod with no more buzzer or bad radio reception The compact time machine and sound center when connected to your iPod MP3 player or other music source produces clean powerful sound while providing time keeping alarm and radio features The system is the world s first time machine with an intuitive user interface that is easier than ever to navigate The JBL On Time 20010 loudspeaker dock has full ability to navigate your iPod via IR remote Also not only can you wake up to your favorite radio station or song on your iPod but with the multiple alarm setting option you can set up to seven different alarms for His and Hers at whatever day or frequency needed ONEPOINT DESIGN The OnePoint connectors provide the connection to your computer Connect the standard cable for iPod to the rear of the JBL On Time 20010 unit and every time you dock your iPod you ll have a connection for synchronizing EVERCHARGE TOPOLOGY The JBL On Time 20010 speaker dock charges your iPod even when it s not connected to the computer or
9. een 2 Use Up Down arrows to select Region and press Enter 3 Use Up Down arrows to select language Press Enter 4 Use Up Down arrows to select radio band region type Press Enter Radio Tuning 1 If AM or FM radio is already selected and playing use Up Down arrows to tune frequency hold either button and release to scan for the next station 2 Otherwise press Source until FM or AM is selected 3 Tune to the desired frequency using Up Down arrows hold either button and release to scan for the next station Preset Select Up Setting Presets 1 While listening to AM FM radio press and hold Preset for 2 seconds The Radio Preset screen will be displayed 2 Use Up Down arrows to select slot to store preset Press Enter to confirm Preset is stored Select Down To Select a Preset for Listening 1 Press Preset once at any screen to display the Preset list 2 Use Up Down arrows to highlight Preset Press Enter to confirm Preset station will begin playing WWW JBL COM CONTROLS CONT Alarm Setting 1 Press Menu Up Level at any screen to display Top Menu may require repeated presses depending on which menu state the unit was previously in Use Up Down arrows to highlight Alarm Press Enter to confirm or press Alarm to go directly to the Alarm menu Use Up Down arrows to select an Alarm slotto edit Press Enter to confirm Hour field becomes highlighted Use Up Down arrows to set Hour Press Enter
10. er iPod models may vary 5 The JBL On Time 20010 system can be put to sleep by pressing the Power button Note If you choose the last song on your iPod please place the iPod in repeat mode which will ensure that the iPod will continue playing past the last song JBL ON TIME 20010 USER GUIDE Screen Contrast Brightness 1 Press the Menu Up Level button until you reach the Top Menu screen 2 Use Up Down arrows to select Display and press Enter 3 Use Up Down arrows to select Brightness or Contrast Press Enter 4 Adjust settings using Up Down arrows Note To set brightness to Auto press the Down arrow until Auto is highlighted Sleep Timer 1 Press the Menu Up Level button until you reach the Top Menu screen 2 Use Up Down arrows to select Sleep and press Enter 3 Use Up Down arrows to select minutes and press Enter 4 The sleep timer is started and the unit will power off when the timer reaches zero Snooze Timer Set 1 Press and hold the Snooze button for 3 seconds until you reach the Set Snooze Timer screen 2 Use Up Down arrows to select minutes and press Enter 3 Snooze feature will use this value the next time it is activated SNOOZE WWW JBL COM 9 10 REMOTE NAVIGATION Button Function Turns main unit power on and off Button is active in any menu state Preset the hot key A single press brings up the preset screen from any menu Repeated p
11. er is used Make sure correct adapter is used for your specific iPod model The iPod is not making full contact with Make sure the iPod is seated securely into the the docking station docking station iPod is not recognized by the Third party accessories may be conflict sure you do not have the JBL On Time 200ID computer when docked into ing with the USB signal unit connected to a USB hub connect the unit the JBL On Time 20010 unit directly into the computer s USB port or there is an error in data transfer Try connecting the USB cable to another port on the USB port is not supplying enough power of the computer CLOCK SET AND CLOCK MEMORY Symptom Possible Problem Solution Note Clock is not set to correct time Incomplete setup Be sure to follow the clock setting procedure through to the end A confirmation screen will be displayed when set completely JBL On Time 200ID unit does There are no batteries installed in Make sure you install three AAA batteries in the not retain memory settings the unit base of the JBL On Time 20010 unit when there is a power outage or if the unit is unplugged Batteries may be low If you have installed three AAA batteries replace them as they may be defective JBL ON TIME 20010 USER GUIDE JBL is a trademark of Harman International Industries Incorporated registered in the United States and or other countries JBL On Time is a trademark of Harman International
12. ing screen Alarm hot key Takes user to Alarms settings of menu tree Button is active in any menu state If alarm is sounding turns alarm off When viewing alarms list enables or disables selected alarm Snooze button and Snooze Timer setting hot key If alarm is sounding enables snooze mode Press and hold for 2 seconds to enter Snooze Timer setting screen Directly switches the JBL On Time 20010 source to iPod Sends Scroll Down command to iPod navigation Works in iPod navigation only Sends Scroll Up command to iPod navigation Works in iPod navigation only Cycles to next source AM FM gt iPod gt AUX Asingle press starts sleep time countdown using currently set timer Press and hold for 2 seconds to enter Sleep Timer setting screen similar to base unit Next Track in iPod navigation only Does not affect JBL On Time 200ID menu navigation or function GJ G G G e CQ QOJ eJiegoo Qo0 de me Previous Track in iPod navigation only Does not affect JBL On Time 20010 menu navigation or function Enter Select in iPod navigation only Does not affect JBL On Time 20010 menu navigation or function Similar function to the center button ofthe iPod Menu Up Level in iPod navigation only Does not affect JBL On Time 20010 menu navigation or function Similar function to the Menu button of the iPod Play Pause Mute button When iPod is the active source a single press sends the Play Pause c
13. n and returns state to Top Level Menu screen state to Top Level Menu screen WWW JBL COM JBL ON TIME 2001D MENU TREE CONT PRESET SOURCE SNOOZE HOT KEY POINT HOT KEY POINT HOT KEY POINT on remote or base unit on remote or base unit hold button for 3 sec on base unit ZUN ION PS n nN set snooze Press and hold Preset timer button while listening to radio to store current AM 4 FM gt iPod gt Aux station Select slot 1 10 and A Selection command Preset 1 10 press enter to store displays setting pe confirmation and returns state to Top Level Menu Select and N Pd begin playing J preset station IN 12 JBL ON TIME 200 D USER GUIDE SPECIFICATIONS JBL ON TIME 20010 Frequency Response 70Hz 20kHz Power Consumption 30 Watts maximum JBL On Time 200ID Transducer Phoenix SE 1 3 4 45mm x 2 full range per channel Power 2 x 6 Watts Input Impedance 5k Ohms Signal to Noise Ratio gt 80dB Input Sensitivity 350mV RMS for rated power output Power USA Canada 120 Volts 60Hz AC Power Europe UK 220 230 Volts 50Hz or 60Hz AC Power Japan 100 Volts 50Hz or 60Hz AC Power Australia 240 Volts 50Hz or 60Hz AC UL CUL CE Approved Dimensions 11 3 16 x 5 3 4 x 2 3 4 WxDxH 284mm x 146mm x 70mm Weight 1 8 Ib 0 8kg Remote Battery CR20
14. nts accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus or the apparatus has been exposed to rain or moisture does not operate normally or has been dropped To be completely disconnected from the power input the main plug of the AC DC adapter shall be disconnected from the main The main plug of the AC DC adapter should not be obstructed OR should be easily accessed during intended use The marking information is located at the bottom of the apparatus The battery shall not be exposed to excessive heat such as sunshine fire or the like The apparatus and AC DC adapter shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus and AC DC adapter PREVENT THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP INC SERVICE PERSONNEL Never remove grille covers in order to service the speaker system The speaker system does not contain any user serviceable parts IMPORTANT NOTE FOR ALL ELECTRONIC PRODUCTS Before inserting or
15. ommand to the iPod When AM FM or AUX is the active source a single press mutes audio amp on the JBL On Time 20010 system JBL ON TIME 20010 USER GUIDE JBL ON TIME 2001D MENU TREE Press and hold for 2 sec at any point in menu structure to return to now Playing screen Now Playing Now Playing ON off i eT Clock Alarm Display Sleep Region 12H 2H HOT KEY POINT HOT KEY POINT on remote Se rea VA on remote or base unit Spanish HR French ALI ALT Germar Brightness Contrast set sleep timer Italian Min Min 15 30 60 Dutch Select Alarm 3 3 am pm I Enable Adjust Adjust A Selection command displays setting Hr TAN confirmation and returns n I state to Top Level Menu set day Min screen i A Selection command Set Radio Type Wn returns state to display US A Selection command WEDITHERI menu screen Europe SASUWK displays setting SUM Japan confirmation and returns i state to Top Level Menu screen AM pos FM iPod Sen A Selection command a displays setting confirmation and returns ASelection command displays setting confirmatio
16. resses cycle through the preset list to the next preset slot Press and hold for 2 seconds when listening to the radio and the Now Playing screen is displayed to store current radio station Volume Increase Display changes to Volume screen Increases volume level turns Amps on if off then increases volume If in snooze mode cancels snooze mode and turns Amps on Times out back to current menu Volume Decrease If in snooze mode no action If not in snooze mode and Amps are on displays changes to Volume screen and decreases volume level Times out back to current menu Does not turn Amps on if off Enter or Selection Confirmation button Confirms selection on any JBL On Time 200ID settings screen If Now Playing screen is displayed returns to last used menu screen Scroll Up Tune Up Moves highlighted box up on any JBL On Time 200ID menu setting screen Increases digit value when setting Time hours and minutes and Snooze Timer In radio mode manually increases tuning frequency hold for Seek Scroll Down Tune Down Moves highlighted box down on any menu setting screen Decreases digit value when setting Time hours and minutes and Snooze Timer In radio mode manually decreases tuning frequency hold for Seek Menu or Up Level button If Now Playing screen is displayed takes user to top level menu screen If in menu settings steps up one level to previous field or menu screen Hold for 2 seconds to return to Now Play
17. the system is off The system s memory is maintained by a backup battery Even with the power out it will provide the alarm function COE COMPUTER OPTIMIZED EQUALIZATION The JBL On Time 20010 system equalization is computer optimized to provide a rich complete soundstage OCT OPTIMIZED COMPRESSION TOPOLOGY The JBL On Time 20010 radio and loudspeaker dock utilizes a proprietary compression technology to ensure clean accurate sound at high output levels DISPLAY The large backlit LCD enables easy viewing and menu navigation Automatic dimming sets the correct brightness level in any room environment JBL ON TIME 20010 USER GUIDE UNPACKING YOUR JBL ON TIME 200 D Carefully unpack your speaker system and identify all its components dida cS Khe FM antenna JBL On Time 200ID Adapters for iPod Power supply Audio cable AM antenna QUICK SETUP INSTRUCTIONS Choose the appropriate adapter for iPod and place it into the docking station Then place your iPod into the adapter e For backup memory install three AAA batteries in the battery compartment underneath the unit Connect the external AM antenna for better reception e Unwind the FM antenna and straighten the wire for the best reception e Plug the power adapter into the DC In jack and then plug the adapter into a wall outlet e fan additional audio source is used connect the source to the Aux In jack 2 AMA
18. want to use a longer cable make sure it s a 3 5mm mini jack stereo male to male cable Distortion static crackling or hissing sounds Noise may be caused by interference from a monitor cell phone or other transmitting device JBL On Time 20010 unit is being over driven by an amplified audio source Volume level may be too high Turn monitor off to see whether noise is eliminated Move JBL On Time 20010 unit s cables farther away from monitor Make sure the unit is connected to an appropriate source device Make sure all signal cables are inserted snugly into receptacles Check volume of source device some devices will distort the output signal if the volume is set to maximum Too much bass or treble Check the EQ setting on your iPod or source device We recommend that the source device EQ be set to Flat or Off JBL On Time 20010 unit emits a loud hum or buzzing noise Input cables are not plugged in properly Check input cable connection Speaker system experiences radio frequency interference or picks up a radio station Input cable may be picking up interference Wrap up excess input cable to make it as short as possible Purchase a ferrite clamp and attach it over the input cable a clamp can be purchased at your local electronics store WWW JBL COM 13 English 14 TROUBLESHOOTING CHARGING AND SYNCING Symptom Possible Problem Solution Note iPod will not charge Wrong adapt
Download Pdf Manuals
Related Search