Home

Philips 47PFL7642D 47" LCD integrated digital widescreen flat TV

Contents

1. D Co To store the favourite pages proceed as follows MENU PHILIPS Press the key to change to TELEVISION favourite page mode 0 9 J Use the I keys to enter the teletext page that you want to store as a favourite page Press and hold the colour key of your choice for about 5 seconds The page is o P tored Hidden information ipti a Repeat steps 2 to 3 with the other To display or hide the concealed colour keys information such as solutions to games exit favourite page mode press the or riddles MENU key To exit teletext mode l Enlarge a page C gt pegas key This allows you to display the top or Note bottom part of the page Pressing it To clear favourite pages press and hold again will return the page to normal size key for about 5 seconds 39 30 Using the TV as a PC Monitor Your TV can be used as a computer monitor Note PC connection is only available via HDMI connector VGA connection is not supported 30 4 Connecting the PC equipment Important For the TV to function as a PC monitor the following steps must be taken HB Connect the DVI output of your computer to the HDMI 1 or HDMI 2 connector of the TV Use a HDMI to DVI cable if the DVI output is to be connected Connect the audio cable to the PC s Audio jack and to the L R Audio jacks EXT3 of the TV Press
2. 3 Stationary images on the TV screen 3 Electric Magnetic and Electromagnetic Fields EMF 3 What is digital TV 4 Digital or Analogue channels 4 Safety ree eteeste eiit ioco bove iE rs 5 Generale nete 5 Care of the 5 and 6 Side or top controls 6 Rear 6 Side 6 Getting started Before you start Connect the 7 Overview of Digital main menu and sub menus eee 10 Switching on the TV for the first time eese 13 Understanding the information on the 14 Banner 14 Symbols description 14 9 1 99 10 10 1 10 2 10 3 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Services lists Rearrange 15 View new TV channels or Listen to new Radio 5 15 Service 16 Add new 16 Reinstall all 16 Manual install services
3. 17 Test 18 19 Access restrictions 20 Information eee 22 Using the Options menu 23 TV Guide eee 24 Digital teletext 25 Using the Conditional Access Module 26 Automatic tuning of analogue 27 Manual tuning of analogue 28 Programme 29 Naming of channel 30 Selecting your favourite programm ee 31 25 25 1 25 2 25 3 25 4 26 27 28 29 30 30 1 30 2 31 31 1 31 2 Features THM GF uo rro ttt ees 32 Parental 33 Ghild lock niiin 34 Active 34 Picture and Sound settings 35 Smart Picture and Sound 36 Picture formats 37 Teletext eire rtt eeeeee eterno 38 Using the TV as PC monitor Connecting the 40 Control TV settings while a PC is connected ettet 40 Using the TV in HD High Definition mode Connecting the HD equipment 41 Control TV settings while in HD 32 32 1 32 2 32 3 32 4
4. Add all services press key if you want to add all the services into your favourites list Remove all services press key if you want to remove all the services from your favourites list To return to previous menu press the lt key MENU Press the key to exit the menu Your favourites list can be selected via the options menu see next page 21 15 Information This menu provides information about the software version and the installation of new software MENU From the digital mode press the key to display the setup menu Use the v key to select information and press gt key twice Favourites Preferences Information Access restrictions e Installation e System software Provide information on problem reports and installing new software OClose O The software version is displayed Use the key to enter the selection mode Use the 4 keys to select Yes or No mode You can activate the menu to automatically accept any software update of your digital TV through off air downloading Normally the product will detect if an update is available while it is in standby mode Next time the television is turned on a message will appear on the screen indicating new software is available Selecting the key activates the software download The software download menu will give a description of the software together with the date and time of the download This may up
5. key to display the main menu Press the A v keys to select Picture Sound or Features and the key to enter the selected item menu Press the A v key to select the settings and the 4 key to select or adjust setting To return to previous menu press the 4 key Y MENU To exit the menu press the Qv key Picture menu The Picture menu comprises Brightness Colour Contrast Sharpness Colour Temp Contrast Horizontal Shift and Vertical Shift Except for the Horizontal Shift and the Vertical Shift features all the other functions work exactly in the same way as the features in the TV Picture menu see page 35 Horizontal Shift feature allows you to adjust horizontal position of the image Vertical Shift feature allows you to adjust vertical position of the image Sound menu The Sound menu comprises Equalizer Balance AVL and Incredible Surround features and work exactly in the same way as the TV Sound menu see page 35 41 Features menu The Features menu comprises Timer Child Lock Parental Cont Mode Selection and Active Control features Except for Mode Selection feature all the other features work exactly in the same way as the TV Sound menu see pages 34 36 31 3 Mode Selection in Features menu When you connect HD High Definition equipment HDMI only supporting resolution of 480p or 720p the Mode Selection feature will be available in the Features men
6. Connect your satellite receiver to EXT1 or EXT2 with a Eurocable 3 Press the Cv key on the remote control to display Source list Press the v key to select EXT1 or EXT2 and press the key to confirm selection With Component Video connectors See Connect a DVD player a satellite receiver or a cable box on page 46 Connectors at rear of TV facing backward Connectors at rear of TV facing downward Em n RGB CVBS SVIDEO wgso AUDIO IN Ar O ss 295 Satellite receiver cable box 45 32 5 Connect a DVD player Cable box or game console With a HDMI connector HDMI is the leading new standard for Digital video and audio inter connection Connect your equipment with the HDMI connector Press the C av key on the remote control to display Source list Press the w key to select HDMI 1 or HDMI 2 and press the key to confirm selection Connectors at rear of TV facing downward AUDIO IN ar L HOMI Oo 32 6 Connect a DVD player a Satellite receiver or Cable box With Component Video Connectors HB Connect the three separate component video cables D to the YPbPr jacks on the DVD player and to the Y yellow Pb blue and Pr red jacks of EXT4 on theTV Connect the audio cable to the DVD s audio L and R jacks and to the L R AUDIO jack of EXT4 2 46 Press the av key on the remote contro
7. Understanding the information on the banner When you select a digital programme an TT Indicates Analogue Teletext is available information banner is displayed for a few in Digital mode seconds at the top of the screen HI Other languages are available and can be selected in the options menu 8 1 Banner description You can also select other languages by pressing the key programme colour of the symbol red green preset start and EI number end time symbols clock yellow or blue indicates the selected Favourites list 11 00 11 45 INE HI 10 38 Snooker Minutes left 22 Note A white symbol will appear if the programme is stored in one or more of the favourites lists which are currently not activated channel name programme title remaining time of programme The banner contains information on the preset number channel name programme duration transmission clock programme title and the time remaining of the current programme 8 2 Symbols description i More information about this programme is available press the key once to display and a second time to remove it Subtitling is available if you want to display them press the key or the key to access the options menu and select subtitles 14 9 Service lists 9 1 Rearrange services This menu allows you to change the order of the stored digital channels and radio stations MENU From the digit
8. v key repeatedly to fav Frogram select Install and the key to 007 enter the Install menu 008 Press gt key until the name Manual Store appears at the top left hand corner Sort of the TV screen The name is now INE stored Fav Program Picture Auto Store 4 Sound Features Install El To return to previous menu press the 4 key Press the w key repeatedly to select Name and the gt key to enter Name mode PHILIPS Install 100 Auto Store 001 Manual Store 002 Sort 003 Name 004 Fay Program 005 006 007 008 Press the A v keys to select the channel you want to name Press the gt key to move to the first name display area B Press the a keys to select the characters maximum of 5 characters and press the 4 gt keys to move around the name display area 30 24 Selecting your Favourite Programmes This feature allows you to skip programmes that you do not watch often and only keep your favourite programmes G Note Oncea programme is skipped you cannot access it by the P key You can only access the programme by the Digit 0 9 keys MENU W Press the key Press the A v key repeatedly to select Install and the key to enter the Install menu D PHILIPS Main Picture Sound Features Install Press the v key to select Fav Program and the key to enter Fav Program list Press
9. key lock symbol disappears 33 25 3 Child Lock The side controls of the TV will be locked when you select the On option in the Child Lock menu The TV can still be operated by using the remote control MENU ll Press key Press A v keys repeatedly until Features is selected and press gt key to access Features menu Press w key to select Child Lock and y press the gt key to access Child Lock mode PHILIPS Features Timer Child Lock Parental Cont Active Control Press A W keys to select On or Off option Press gt key to activate deactivate On or Off option B To return to previous menu press the 4 key MENU To exit the menu press the key 34 25 4 Active Control Automatically adjusts the picture setting for optimal picture quality continuously under any signal conditions MENU Press key Press A v keys repeatedly to select Features and press the key to enter Features menu Press A v keys repeatedly to select Active Control and press the key to enter Active Control mode D PHILIPS Features Timer Child Lock Parental Cont Active Control Press a v keys to select On or Off option Press gt key to activate deactivate On or Off option l To return to previous menu press the 4 key MENU To exit the menu press the key 26 Picture and Sound settings You can adjust the picture and sound
10. this key is used to access digital radio stations Press the key to access radio list Note To return to digital video mode press the po key again TV RADIO EPG TV Guide see page 24 Programme P Selects next or previous available channel source or page in digital menu Alternate channel Edit or back space Cre In Analogue Digital mode it allows you to alternate the previously viewed programme and the current programme It is also used as an edit or back space key when you are naming your favourite channel SMART SMART Smart Picture Sound Q Accesses a series of predefined picture and sound settings see page 36 Overview of Digital main menu and sub menus Use the key of the remote control to select Digital mode From the digital mode press the MENU key to display the setup menu Use the A Y 4 keys to navigate select and adjust menu items Setup 10 Favourites List 1 List 2 List 3 List 4 Name Select TV channels Select Radio stations Add all services Remove all services Name Select TV channels Select Radio stations Add all services Remove all services Name Select TV channels Select Radio stations Add all services Remove all services Name Select TV channels Select Radio stations Add all services Remove all services Setup Preferences Language Audio Subtitle Teletext Subtitling Mode Subtitles for heari
11. 32 5 32 6 32 32 8 32 9 Connecting other equipment Connect VCR and DVD recorder 44 Connect Decoder and VCR 44 Connect 2 VCRs or VCR and DVD recorder 45 Connect a satellite receiver 45 Connect a DVD player Cable box or Game 46 Connect a DVD player a Satellite receiver or Cable box 46 Connect a PC ii eerte 47 Connect a Camera Camcorder or Game 48 Connect a Headphone 48 33 34 Troubleshooting Glossary 1 Introduction Thank you for purchasing this television set This manual contains all information you will need to initially install and operate your new TV Q If this instruction manual does not give an answer to your problem or if the troubleshooting page does not solve your TV problem you can call your Local Philips Customer or Service Centre See the supplied Worldwide guarantee booklet for details Please have the Model and Product number which you can find at the back or the bottom of your television set or on the packaging ready before calling the Philips customer support service 1 1 Important information 1 1 1 Stationary images on the TV screen A characteristic of LCD and Plasma Panels is that displaying the same image for a long time can cause a permanent after image to remain on the
12. HDMI to connect your TV to the PC it is possible that they may not operate perfectly first time Often this is resolved by changing the resolution or settings of the device connected to the TV In some situations you may see a dialogue box on screen and need to press OK to continue watching the TV Please refer to the user manual of the connected device on how to make necessary changes 31 Using the TV in HD High Definition mode The HD High Definition mode allows you to enjoy clearer and sharper pictures if you are using HD equipment that can produce high definition video signals 31 4 Connecting the HD equipment Important For the TV to function in the HD mode the following steps must be taken Connect the HDMI or DVI output of your HD equipment to the HDMI 1 or HDMI 2 connector of the TV Usea DVI to HDMI cable if DVI output is connected You can also connect the Component Video Outputs Y Pb Pr of the HD equipment if any to the Component Video Inputs Ext 4 of the TV Connect the audio cable to the Audio jack of the HD equipment and to the L R Audio jacks EXT3 of the TV Press the v key to display Source List and use the A v key to select HDMI 1 or HDMI 2 or EXT 4 if you using YPbPr connection Source list EXT 1 EXT2 EXT 3 EXT 4 HDMI 1 HDMI 2 Digital TV Press the gt key to switch to the selected source 31 2 Control TV settings while in HD mode MENU W Press the
13. as some recorders may be susceptible for signals from the display Keep a minimum distance of 0 5 m from the Recorder Screens Tip With the aerial cable only You can also connect your decoder directly to EXT1 or EXT2 with a Eurocable lll Connect the aerial cables O and Q as shown Tune in your recorder s test signal and store the test signal under programme 4 NENNEN number 0 Lr Wis See Manual tuning of analogue programmes page 28 See also the user manual of your recorder Recorder Decoder 44 32 3 Connect 2 VCRs or VCR DVD recorder With Eurocables HB Connect the aerial cables D and 3 as shown Connect your VCRs or DVD recorder to EXT1 and EXT2 with the Eurocables 0 and 5 k Press the Cv key on the remote control to display Source list Press the w key to select EXT1 or EXT2 and press the key to confirm selection With the aerial cables only HB Connect the aerial cables D and 3 as shown Tune in your recorder s test signal and store the test signal under programme number 0 See Manual tuning of analogue programmes page 28 See also the user manual of your recorder Connectors at rear of TV facing backward Connectors at rear of TV facing downward m ar L 7 ss O Recorder Recorder 32 4 Connect a satellite receiver With a Eurocable HB Connect the aerial cables O and 2 shown
14. at the top left corner of the screen When the page is located the counter stops searching and the page is displayed Repeat this operation to view another page If the counter continues to search this means that the page is not transmitted In that case select another number Direct access to the items ee Colour areas are displayed at the bottom of the screen The 4 colour keys are used to access the items or corresponding pages The colour areas flash when the item or the page is not yet available Contents PHILIPS This returns you to the contents page TEEN usually page 100 or hit list menu V _ 38 Picture Teletext cm Press the key Press the key to show Teletext on the right and the picture on the left of the screen Press the key to return to a full teletext mode Press the key to return to a full screen picture El Favourite pages Note only available in RF Analogue Instead of the standard colour areas displayed at the bottom of the screen you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys red green yellow blue Once set these favourite pages will become the default every time teletext is selected
15. complete list of digital programmes as you would in a newspaper or TV magazine 1 3 Digital or Analogue channels When the television is powered on for the first time it will always be in Digital mode Use the key of the remote control to switch the TV between analogue and digital mode Use the P or 0 to 9 keys to select channels G Note Chapters 6 to 19 contain all the information you need to operate your TV in the Digital mode Chapters 20 to 29 contain all the information and instructions you need to operate your TV in the Analogue mode 2 Safety 2 1 General people are required to lift and Carry a TV that weighs more than 25 kg Improper handling of the TV can cause Serious injury If you place the TV set on a surface Ensure the surface is level and that it can The weight of the TV If you wish to hang your TV on a wall do Not hang the TV yourself Your TV must Be hung by qualified technician Improper hanging can cause the TV to be unsafe Before you hang your TV on a wall ensure the wall is suitable to carry the weight of the TV The connections do not have to be made before you hang the TV but the cables must be inserted into the TV Wherever you place or hang the TV ensure that air can circulate freely through the ventilation slots Do not position the TV in a confined space E Do not place naked flame sources such as lighted candles close to the TV set Do not place a v
16. into the module Ensure that the arrow on the viewing card faces the arrow of the module before inserting into the module slot Insert the module into the Common Interface CI slot on the TV E Switch on the TV MENU Press the key to display the setup menu Use the w key to select Access restriction and press the gt key Press the gt key to enter into the Conditional Access Module menu Press button as indicated on the screen to access the CAM s functions EB IMPORTANT If no module is inserted or the module is not inserted properly the Conditional Access Module menu will not be displayed If you have inserted a module check that it is fully inserted in the correct manner as mentioned in step 2 above The functions that now appear on screen are dependent on the contents of the selected Conditional Access Module in your country Refer to the instruction supplied with the module or contact the vendor 20 Automatic tuning of analogue programmes This menu allows you to automatically search for all the analogue programmes available in your region Before you automatically search for all the analogue programmes ensure the TV is in analogue mode If it is in digital mode press the an Analogue Digital key to enter the analogue mode MENU Gry Press the Tv key PHILIPS Main Picture Sound Features Install Press the v key repeatedly to select Ins
17. is selected see page 28 certain channels Verify if the volume is not at the minimum e Check that the mute mode is not If mute mode is on press the Cx key to deactivate mute mode Verify the connections between the optional equipment and the TV Sound interference Try switching off any electrical appliances to prevent interference for example hair dryer vacuum cleaner MENU Unable to understand Press the key to exit menu from screen the selected language HERO on screen to operate Press the key again to display menu set in digital mode Press the key to select the second item on the menu and the gt key to enter into the next menu level Press the gt key again and use the vw key to select the fifth menu item Press the gt key to enter into the next menu level e Press the A keys to select correct language Press the key to confirm selection MENU e Press the key to exit menu TV not responding Move closer to the receiver at the front of the TV to remote control Check the placement of the batteries Try changing the batteries Symptom One or a few tiny spots on the screen that do not change colour along with the video picture Intermittent or flickering picture in HD mode No sound or picture but front panel red light is on PC modes do not work S Video colour becomes faint Black bar on top and bottom of screen in PC mode AC3 not a
18. normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health Disposal of batteries The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose exhausted batteries according to local regulations Product information The model and serial number can be found at the rear of the TV and on the packaging For a larger TV information is also on left hand underside of the Rear of TV Left hand underside of TV Standby Power Consumption for this set is less than 1 W Power Consumption of the set can found on the type plate at the rear of the TV For more specifications of the product see the product leaflet on www philips com support Note Specifications and information are subject to change without notice f you need further assistance please call the customer support service in your country The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee booklet Important AC3 an audio format is not supported for this set Use the key the remote control to select an alternative audio Some TV antennas require power from the TV set This set does not support such a feature Table of contents 3 1 3 2 3 3 4 1 4 2 4 3 44 45 8 1 8 2 Introduction ceres 3 Important Information
19. not support such a feature Changing from one channel to another channel takes a long time Cannot access digital menu 50 Pay TV channels are encoded by the cable provider and take a longer time to decode This is normal behaviour and no action is required Check whether TV is in analogue mode If it is press key to switch to digital mode 34 Glossary DVI Digital Visual Interface A digital interface standard created by the Digital Display Working Group DDWG to convert analog signals into digital signals to accommodate both analog and digital monitors RGB signals These are the three video signals Red Green Blue which make up the picture Using these signals improves picture quality S VHS signals These are 2 separate Y C video signals from the S VHS and Hi 8 recording standards The luminance signals Y black and white and chrominance signals C colour are recorded separately on the tape This provides better picture quality than with standard video VHS and 8 mm where the Y C signals are combined to provide only one video signal 16 9 Refers to the ratio between the length and height of the screen Wide screen televisions have a ratio of 16 9 conventional screen TV sets have a ratio of 4 3 MHEG Multimedia and Hypermedia information coding Expert Group provides standards for the coded representation of multimedia and hypermedia information objects that are interchanged among appl
20. page 19 27 21 Manual tuning of analogue programmes This menu is used to store the programmes System time Press the A v keys to select MENU Europe automatic detection Press the Cv key France LL standard Press the v keys repeatedly to UK I standard select Install and the key to West Europe BG standard or enter the Install menu East Europe DK standard Press the gt key to confirm PHILIPS selected system Main ene B search Features Press the gt key The search starts Install Once a programme is found the scanning stops and its name is displayed if available Go to the next step If you know the frequency of the 3 required programme this can be El Press the v key to select entered directly using the to Manual Store and the key to keys enter Manual Store menu 7 PHILIPS u Program No D Install Enter the required number with the Auto Store Syst 0 to 9 V keys Manual Store Sort 2 El rine Tune Name Fav Program If the reception is not satisfactory adjust using the A v keys E store To store the changes press gt Press the A v keys to select the items key The programme is now stored in the Manual Store menu to adjust or Repeat steps B E for each programme to be stored PHILIPS Manual store To return to previous menu press the System 4 key
21. products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products 1 2 What is digital TV Digital Television offers a far wider choice of TV viewing free from the interference that you may experience on analogue TV It promises to transform television viewing into a new whole experience There is a greater selection of wide screen programmes Many of your favourite programmes are in wide screen on the digital channels something the analogue TV cannot do properly There is new whole experience of inter activity on digital TV By using your remote control you can access all kinds of information like the digital text which is much clearer than the old teletext system It gives you the added enjoyment of related information running alongside the programme you are watching You can also access an Electronic Programme Guide that provides you with a quick and easy way to view a
22. screen This is called phosphor burn in Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Examples of stationary images this is not an all inclusive list you may encounter others in your viewing TV and DVD menus listings of DVD disk content e Black bars when black bars appear at the left and right side of the screen it is recommended to change to a picture format so that the picture fills the entire screen TV channel logo present a problem if they are bright and stationary Moving or low contrast graphics are less likely to cause uneven aging of the screen Stock market stickers presented at the bottom of the TV screen Shopping channel logos and pricing displays bright and shown constantly or repeatedly in the same location on the TV screen Examples of still pictures also include logos computer images time display teletext and images displayed in 4 3 mode static images or characters etc Q Tip Reduce contrast and brightness when viewing 1 1 2 Electric Magnetic and Electromagnetic Fields Royal Philips manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our
23. services Some digital channels also offer information on the programme being broadcast a message or an instruction may appear on the screen Under certain circumstances Digital text or interactive services may have priority over subtitles This can result in the subtitles not automatically reappearing when leaving Digital text or interactive services on a channel which is broadcasting subtitles In these cases subtiltes can be intialised either by toggling the key on the remote control by changing channels HB To use the digital teletext follow the instructions on screen Depending on the service you can be asked to use the 4 A cursor keys colour keys Teletext On Off key and sometimes the 0 9 numerical keys Note If no colour key links are available in the Digital Teletext to allow you to exit teletext mode use the key instead When you have finished watching teletext select a different channel with keys or follow the on screen instructions to return to picture When you switch to a digital channel with links to a teletext service software is downloaded in the background to enable the teletext function You will have to wait for a while before you press the amp key to allow the software download to complete If you press the key before the download is complete there will be a short delay before the teletext screen is di
24. the key to display Source List and use the A key to select HDMI 1 or HDMI 2 Source list Digital TV Press the gt key to switch to the selected source 30 2 Control TV settings while a PC is connected MENU ll Press the key to display the main menu Press the v keys to select Picture Sound or Features and the key to enter the selected item menu 40 Press the A v key to select the settings and the 4 key to select or adjust setting To return to previous menu press the 4 key y MENU To exit the menu press the key Picture menu The Picture menu comprises Brightness Contrast Sharpness Colour Temp Contrast Horizontal Shift and Vertical Shift features Except for the Horizontal Shift and the Vertical Shift features all the other features work exactly in the same way as the features in the TV Picture menu see page 35 Horizontal Shift feature allows you to adjust horizontal position of the image Vertical Shift feature allows you to adjust vertical position of the image Features menu The Features menu comprises Mode Selection and Format features When you connect PC supporting resolutions of 480p or 720p the Mode Selection item will be available in the Features menu This will allow you to select between the PC and HD mode Format feature works exactly in the same way as the picture formats of the TV see page 37 G Note When using
25. FLATIV TERRESTRIAL www philips com support EN USER MANUAL PHILIPS www philips com support Country Number Tariff Austria 0810 000205 0 07 min Belgium 078250145 0 06 min Czech Rep 800142840 free Denmark 3525 8759 local Finland 09 2311 3415 local France 0821 611655 0 09 min Germany 01803 386 852 0 09 min Greece 0 0800 3122 1280 free Hungary 0680018189 free Ireland 01 601 1777 local Italy 840320086 0 08 min Luxemburg 40 6661 5644 local Netherlands 0900 8407 0 10 min Norway 2270 8111 local Poland 0223491504 local Portugal 2 1359 1442 local Slovakia 0800004537 free Spain 902 888 784 0 10 min Sweden 08 5792 9100 local Switzerland 0844 800 544 local UK 0870 900 9070 local This information is correct at the time of press For updated information see www support philips com Eb Recycling The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal A mmm Disposal of your old product Your product is designed and manufactured with highly quality material and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose your old products with your
26. Press the key to exit the menu Maturity rating select your preferred rating to lock the channel Maturity rating will only block certain programmes if the broadcaster provides data with the programme 20 14 Setting up your list of favourite channels This menu enables you to create a favourite list with your preferred TV channels and radio stations For example each member of your family can create his her own favourites list MENU ll From the digital mode press the oe Tal key to display the setup menu Favourites ee Preferences e Information Access restrictions Installation Make changes to your lists of favourite services O Close Press to enter into the favourites list menu You have the choice to create 4 different favourites lists Use the A Y keys to select your Favourites list List 1 List 2 List 3 or List 4 and press gt key Use the A v keys to select a setting and press gt key to enter into the sub menu Name use the 4 keys to move around the name display area 16 characters and the P keys to select the characters To edit any character use the key When the name has been entered press key to exit Select TV channels use the A v keys to select your favourite TV channels and confirm with key Press 4 key to exit Select radio stations use the A v keys to select your favourite radio stations and confirm with key Press 4 key to exit
27. Search Program No MENU beste To exit the menu press the key Store 22 Programme Sort Sort feature allows you to change the programme number for a particular stations D PHILIPS Install 100 Auto Store 00 M Manual Store 002 Press the key ki 003 Name 004 Fav Program C 005 Press the A v key repeatedly to 006 select Install and the key to 007 008 enter the Install menu PHILIPS Main _ Press the A v keys to select the new _ Auf programme number and confirm with Sound Manual Store 2 FEES Sart the 4 key The arrow points to the right and sorting is completed Fav Program m PHILIPS Install 100 Auto Store Manual Store Press the v key to select Sort and the key to enter sort mode av Frogram D PHILIPS Install 100 AutoStore 00 Manual Store 002 Sort 003 Name 004 Repeat steps and for each _ Fav Program 005 programme number you wish to re 006 007 number 008 To return to previous menu press the 4 key Select the programme number you want to move using the A v keys and the gt key to enter sorting mode The arrow cursor now points to the left 29 English 23 Naming of Channel If preferred you can assign a name to the TV PHILIPS channel Install 106 MENU _ Manual Store 002 ll Press the key _ Sort E Press the A
28. Servcie Now Next 1 BBC 2 BBC TWO 3 ITC Channel 3 4 Channel 4 5 ITV2 6 BBC CHOICE eg See it saw Snooker Trisha Microsoap Ice Skating This morning This afternoon Gmtv2 Oakie Doke Bodger amp Badger OTop OClose O Options A list of all the digital programmes in the currently selected favourites list is displayed Use the v key to enter into the Preset service list or press gt key to access Today list Use the 4 keys to select a programme The TV guide features are displayed at the bottom of the screen Use the coloured keys red green yellow blue or white to activate them 24 Top yellow key to go directly to the top of the list Close blue key to exit from the TV guide Options white key with this menu you can select your favourites list mode or themes Themes are areas of interest you can for example decide to display only drama news movie Press the key if you want to display more information about the selected programme if available EPG B Press the key to exit the menu 18 Digital teletext MHEG Available in U K only Digital teletext services differ greatly from analogue teletext When you switch to a Digital teletext service the images you see contain graphics and text which are laid out and controlled in a manner decided by the broadcaster Some digital channels which you select like any other channel offer dedicated teletext
29. V set for the first time a menu will appear on screen Language cg English Espafiol Cou Frangais Italiano Magyar Time Zone e Service Scan e Select your preferred language e e e e li Press the gt key to enter into Language mode and press the A keys to select your preferred language Press the key to confirm selection Press the A v keys to select Country or Time Zone and press the gt key to enter into Country or Time Zone mode caution If you select a wrong country the channel numbering will not be according to the standard for your country and you may not receive all services or nothing at all G Note The Language can be selected independently from the Country Press the A keys to select your preferred Country or Time Zone and the key to confirm your selection Press the v key to select Service Scan to scan the available analogue and digital channels Press the key to start the installation Note If no digital channels are detected press av key to switch to analogue mode y g amp Note If at some point of time you decide to reset to the factory default settings press and hold down the MENU key on the side of the TV set for 5 seconds A menu will appear on the screen Repeat steps 5 as if this was the first time you have turned on the TV This activity will reset both the Digital and Analogue mode to factory default settings 13 8
30. ains in standby mode red indicator press the PROGRAM key on the side or top controls or the key on the remote control 4 5 Using the Remote Control Insert the 2 batteries supplied Be sure the and ends of the batteries line up correctly inside of case is marked 5 u Standby Remote control functions PHILIPS TELEVISION NJ To set the TV to stand by mode To switch the TV on again press the o key once more or press the 0 9 P or A Cv key e Note when the TV is switched on the last viewed mode is displayed Sound mode 11 Used to force programmes in Stereo and Nicam Stereo to Mono For bilingual programmes select Dual I or Dual as indicated on the screen during such broadcasts The Mono indication shows up in red when in forced position In digital mode I II displays the list of audio languages Subtitles mode In digital mode this key activates or deactivates the subtitle mode MENU MENU To call up or exit the TV analogue menus Cursors Up Down Left Right av 4 These 4 keys are used for selection and adjustment of menu items Analogue or Digital mode To switch between the television analogue and digital mode Picture Format See page 37 AV To display Source Li
31. al mode press the key to display the setup menu Use the v key to select Installation and press gt twice to select the Service lists menu Setu Installation Service lists Rearrange services Service setup View new TV channels Test reception Listen to new Radio stations Manage service lists e e Use the A Y keys to select Rearrange services and press gt key Setup 11 28 Installation Rearrange services View new TV channels Listen to new Radio stations 0 00 Ewe Change preset location of services je 0 OClose O Use the A Y keys to select the channel you want to exchange Press key to activate If you want to uninstall the selected channel press the red key l select the new channel number by using the A v Press key to confirm The exchange is done E Repeat the operations to until all the channels are in the required order To return to previous menu press the 4 key KEN Press the key to exit the menu 9 2 View new TV channels or Listen to new Radio stations This menu allows you to check the availability of new TV channels or new radio stations that have been launched by the broadcaster after the initial installation MENU From the digital mode press the key to display the setup menu Use the v key to select Installation and press gt twice to select the Service lists menu Use the A Y keys to s
32. ase filled with water near the TV Spilling water into the TV can result in electric shock Do not operate the TV if water is spilled into the set Unplug the power cord from the mains immediately and have the set checked by a qualified technician Do not expose the TV or the batteries of the remote control to heat direct sunlight rain or water Do not touch any part of the TV power lead or aerial lead during lightning storms Do not leave the TV in stand by mode for an extended period of time Instead disconnect the TV from the mains Pull the power lead by the plug do not pull on the power lead Do not use a poor fitting mains socket Insert the plug fully into the mains If it is loose it may cause arcing and result in fire Do not connect too much equipment to the same mains socket Excess equipment can cause overloading and result in fire or electric shock Care of the screen Do not remove the protective sheet until you have completed the stand wall mounting and connections Please handle with care Note Use only the soft cloth provided to clean the glossy front of the TV Do not use a cloth that is dripping with water Do not use acetone toluene or alcohol to clean the TV As a safety precaution unplug the power cord from the mains when you clean the set Do not touch push rub or strike the screen with anything hard as this may scratch or damage the screen permanently 3 Overview of
33. camcorder 4 Getting started 4 1 Before you start e Warning The connections do not have to be made before hanging but the cables must be inserted into connectors of the TV 4 2 Connect the antenna Insert the aerial plug firmly into the 75 aerial socket at the bottom of the TV and in the wall antenna socket Connectors at rear of TV facing downward mem o 0 O 4 3 Connecting and Disconnecting the mains Plasma TV CAUTION This a Class 1 apparatus It must be connected to a MAINS socket out with a protective earthing connection The appliance coupler of the mains cord on the TV is used as the disconnect device Ensure the power cord is fully inserted into the TV mains socket and the wall socket To disconnect from the mains remove the mains cord from the mains socket at the back of the TV or remove the plug from the wall socket Verify that the mains supply voltage in your home corresponds to the voltage printed on the sticker at the rear of the TV e Warning If the TV is mounted on a swivel base or swivel arm ensure no strain is placed on the power cord when the TV is swivelled Strain on the power cord can loosen connections This may cause arcing and result in fire 4 4 Switching on the TV To switch on the TV press the POWER key on the side or top controls A blue green indicator comes on and after a few seconds the screen lights up If the TV set rem
34. d Music Emphasize low tone mode Voice Emphasize high tone Music Personal Sound settings are set to or your preference Voice Movie Personal G Note The Personal setting is the setting that you set up using the Sound menu in the main menu This is the only setting in the Smart Sound setting that can be changed All other settings are pre set at the factory for your convenience 36 28 Picture Formats Picture formats for 4 3 screens Press the key to cycle through the different formats 4 3 This format is recommended to display the 4 3 picture using the full surface of the screen Expand 4 3 When this format is selected the picture is vertically expanded thus reducing the horizontal black bars Compress 16 9 The format is recommended to compress full screen movie images into letter box format When this format is selected black horizontal bars can be seen at the top and bottom of the TV screen Picture formats for wide screens Press the key to cycle through the different formats LOJ O 4 3 The picture is reproduced 4 3 format and a black band is displayed on either side of the picture Movie Expand 14 9 The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture Some of the top and bottom of the picture is clipped off Movie Expand 16 9 The picture is enlarged to 16 9 format This mode is recommended when displaying pictures w
35. date certain menus functions or add new features but the general way in which the TV operates will not change 22 Once accepted the download will take place at the designated time and date Note The TV must be put into standby when the download is due in order for it to take place Off Air Downloading of new software Whenever a new software is available it is advisable to always accept and download the software n case new software is available you will see a message when you switch on the TV A message indicating the date and the duration of download is indicated in the menu Press the key to proceed Important Leave your TV in standby to allow upgrade to take place Do not power off your main switch f a problem occurred during the download of the new software you will be informed of the next scheduled software download Press the key to proceed to use your TV normally If download is successful a congratulatory message will appear Press the key to accept New software and upgrade instructions may also be obtained from the web site www philips com To return to previous menu press the 4 key MENU B Press the key to exit the menu 16 Using the Options menu This menu gives you direct access to the favourites list the language selection and some other selections u From the digital mode press the white key to display the options menu Options Favourites ep Subtitle languag
36. e Stop Time Program No Activate To make adjustments to the timer setting use the 4 gt A Y or Digit 0 9 keys 32 Sleep to select a time period in which the set will switch to standby mode upon reaching the selected time period Select Off option to deactivate the feature Note During the last minute of a Sleep time setting an on screen countdown will be displayed Press any button on the remote control to cancel the Sleep shut down Time enter the current time Start Time enter the start time Stop Time enter the standby time Program No enter the number of the channel for the wake up alarm Activate the settings include Once for a single alarm Daily for each day Off to cancel B Press C key on the remote control to put the TV set in standby mode The TY will automatically come on at the programmed time If you leave the TV set on it will just change channel at the Start Time and will go to standby mode at the Stop Time 25 2 Parental Cont The Parental Cont feature allows you to lock channels to prevent your children from watching certain programmes MENU Press key Press A v keys repeatedly to select Features and press the key to enter Features menu PHILIPS Main Picture Sound Features Install Press A v keys repeatedly to select Parental Cont and press key to enter Parental Cont mode PHILIPS Feat
37. e e Audio language Mode Selects the active favourite list Use the A Y keys to select a setting and press key to enter the sub menu Favourites use the A v keys to select your favourites list and confirm with key Note The none option deactivates any favourites list To create your own favourites list see page 21 Subtitle language use the A v keys to temporarily change the language and confirm with key Audio language to temporarily change the audio sound language To permanently change the audio and subtitle languages use the Preferences menu see page 19 Mode you can choose to only have radio stations TV channels or services without audio or video Note for the UK only The TV list will contain both radio stations and TV channels Banner duration to select the duration for which the banner is visible Press the white ero key to exit the menu 23 English 17 IV Guide The TV guide is an Electronic Programme Guide that provides you with a quick and easy way to view a complete list of digital programmes as you would in a newspaper or TV magazine You can navigate through the list of digital programmes and obtain detailed information on the programmes You can also program the TV to provide a digital channel to be recorded EPG Bl From the digital mode press the m key to display the TV guide 1 17 28 BBC e Now Next Toda Preset
38. elect View new TV channels or Listen to new Radio stations If new services are available press to enter into the list and use the A v keys to move through the list To return to previous menu press the lt key MENU Press the key to exit the menu 15 English 10 Service setup 10 1 Add new services This menu allows you to search for new TV channels or radio stations that have been launched by the broadcaster after the initial installation MENU From the digital mode press the Germ key to display the setup menu Use the v key to select installation and press gt key Select Service setup v and press gt key Setup 11 28 Installation Service lists Add new services Service setup Reinstall all services Test reception Manual install services Install and manage services O Close Press gt to add new services and press key to activate the installation Setu Installation gt Service setup Search TV channels found Radio stations found Other services found Store Discard Add new services Reinstall all services Manual Install services Scan for new services 16 The search begins and only new channels will be stored and added to the channel list menu The percentage of the installation that has been completed and the number of channels found is displayed When the search is completed press the key to accept the new
39. enewing adjusting or updating the aerial It is however advisable to contact a specialised aerial installer in order to achieve best results After entering the frequency use the key to exit Frequency slot El To return to previous menu press the 4 key MENU Press the key to exit the menu 12 Preferences This menu allows you to select your preferred language or to make changes to the location country and time zone MENU From the digital mode press the key to display the setup menu Use the v key to select Preferences and press gt key Setu Preferences Language lt gt Audio Location Subtitle Teletext Subtitling Mode Subtitling for hearing impaired System Select your preferred language e o Select Language or Location v and press gt key Use the v keys to select a setting and press gt key to enter into the sub menu Make your adjustment and press key or 4 key to exit To return to previous menu press the 4 key 4 MENU B Press the b amal key to exit the menu Language default settings Audio to select the audio sound language Subtitle Teletext to select the subtitle teletext language Subtitling mode off on or auto subtitle only displayed in case of original audio transmission Subtitles for hearing impaired to activate or deactivate the specific subtitling for hearing impaired if made available by the broadca
40. for use a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres General Points Please take note of the section entitled Tips at the end of this booklet Interference The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV licence holders improve reception of BBC and IBA programmes where they are being spoilt by interference If your dealer cannot help ask at a main Post Office for the booklet How to Improve Television and Radio Reception Mains connection Before connecting the TV to the mains check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV If the mains voltage is different consult your dealer Important This apparatus is fitted with an approved moulded 13 AMP plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug Ml Remove fuse cover and fuse The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost make contact with your retailer in order to verify the correct type Refit the fuse cover If for any reason the fitted plug is not suitable for your socket outlet please consult your retailer or a qualified electrician before proceeding with the installation Connecting the aerial The aerial should be connected t
41. hich have black bands at the top and bottom letter box format In this mode large parts of the top and the bottom of the picture are clipped off Subtitle Zoom This mode is used to display 4 3 pictures using the full surface of the screen leaving the sub titles visible Part of the top of the picture is clipped off Super Wide This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture Widescreen The picture is displayed in the original proportions of images transmitted in 16 9 format Note If you display a 4 3 picture in this mode it will be stretched horizontally 37 29 Teletext Teletext is an information system broadcast by lll Teletext On Off certain channels which can be consulted like a Press this key to switch on teletext newspaper It also offers access to subtitles for display A contents page appears with a viewers with hearing problems list of items that can be accessed Each or who are not familiar with the transmission item has a corresponding 3 digit page audio language cable networks satellite number If the selected channel does not channels etc broadcast teletext the indication 100 will be displayed and the screen will remain blank Proceed to exit teletext by pressing the key again Selecting a page Enter the number of the page required using the 0 to 9 keys or P keys Example page 120 enter 120 The number is displayed
42. ications and services using a variety of media The objects define the structure of a multimedia hypermedia presentation HDMI High Definition Multimedia Interface Provides an uncompressed all digital audio video interface between the TV and any HDMl equipped audio video component such as set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two channel digital audio System Television pictures are not broadcast in the same way in all countries There are different standards BG DK and LL The System setting page 28 is used to select these different standards This is not to be confused with PAL or SECAM colour coding PAL is used in most countries in Europe SECAM in France Russia and most African countries The United States and Japan use a different system called NTSC MPEG Moving Picture Experts Group is the nickname given to a family of International Standards used for coding audio visual information in a digital compressed format 51 Information for users in the UK not applicable outside the UK Positioning the TV For the best results choose a position where light does not fall directly on the screen and at some distance away from radiators or other sources of heat Leave a space of at least 5 cm all around the TV for ventilation making sure that curtains cupboards etc can not obstruct the air flow through the ventila tion apertures The TV is intended
43. ion Select On option to allow you to watch original HD format 1080i only To return to previous menu press the 4 key MENU To exit the menu press the key 31 5 Supported input formats 20 models only oj a All models except 20 HD 720p 1080i 1080p Note SD Standard Definition Formats are for YPbPr connection only Note Your Philips TV is HDMI compliant If you do not get a good picture please change the video format on your device DVD player cable set top box etc to a standard format For example for DVD player select 720p 1080i or 1080p Please note that this is not a defect of the TV set 43 32 Connecting other equipment 32 1 Connect VCR or DVD recorder Connectors at With a Eurocable rear of TV facing downward HB Connect the aerial cables D and oO as shown e i edis Connect the Eurocable as shown 9 9 9 control display Source list Press the v key repeatedly to select and press the gt 1 00 key to confirm selection Press the Cv key on the remote Connectors at rear of TV facing backward 32 2 Connect Decoder and VCR Connect a Eurocable to your decoder and to the special euroconnector of your Connectors at rear of TV facing downward nth recorder See also the user manual of your ges TET recorder a L Y 9 O Warning EXTA Do not place your recorder too close to the screen
44. l to display Source list Press the w key to select EXT 4 and press the key to confirm selection In case of a cable box and or a satellite receiver also connect the cable TV cable and or the satellite antenna cable and the aerial cable Connectors at rear of TV facing downward 1050 ar A Connectors at rear of TV facing downward Satellite receiver cable box Note Connectors Connectors at rear of at side of TV TV facing downward Audio Cables are often colour coded Connect s UR ira KO KO red to red white to white etc The labels for the component video sockets may differ depending on the DVD player connected Although the abbreviations may vary the letters B and R stand for the blue and red component signals respectively and Y indicates the luminance signal Refer to the DVD player s instructions for use for definitions and connection details To get an optimal viewing it is advised to switch your equipment to the highest possible supported display modes PC equipped with a DVI connector Warning El Use a DVI to HDMI cable to connect to one of the HDMI connectors of your If you notice scrolling images TV wrong colours or no colour no picture or Connect the audio cable to the PC s even combinations of these on your screen AUDIO jack and to the L R AUDIO verify if the connections are done in
45. ng impaired System Location Country Time zone Information L System software Current software version Always accept new software Access restrictions Set pin code protection Maturity rating TV channels Radio stations Change pin code Basque Catalan Croatian Czech Danish Dutch English Finnish French Gaelic Gallegan German Greek Hungarian Italian Norwegian Polish Portuguese Russian Serb Slovak Spanish Swedish Turkish Welsh On Off Auto Yes No Cesky Dansk Deutsch English Espa ol Fran ais Italiano Magyar Nederlands Norsk Polski Portugu s Suomi Svenska Australia Austria Belgium Czech Denmark Finland France Germany Greece Hungary Italy Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom Yes No On Off 11 Setup L Installation Service lists Rearrange services View new TV channels Listen to new Radio Stations Add new services Search TV channels found Radio stations found Other services found Store Discard Service setup Reinstall all services Search TV channels found Radio stations found Other services found Store Discard Manual install service Frequency Network name Signal quality Signal strength Store Discard Test reception Frequency Network name Signal quality Signal strength 12 Switching on the TV for the first time When you switch on the T
46. o the socket marked at the back of the set An inferior aerial is likely to result in a poor perhaps unstable picture with ghost images and lack of contrast Make shift loft or set top aerials are often inadequate Your dealer will know from experience the most suitable type for your locality Should you wish to use the set in conjunction with other equipment which connects to the aerial socket such as TV games or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug Fitting the stand if provided Use only the stand provided with the set making sure that the fixings are properly tightened A diagram showing how to assemble the stand is packed with the stand Never use a make shift stand or legs fixed with woodscrews PHILIPS 2007 Koninklijke Philips All rights reserved Document order number 3139 125 38524
47. s used to limit sudden increases in sound especially on programme change or advertising slots Incr Surround select between Incredible Surround and Stereo when in stereo transmission and between Mono and Spatial when in Mono transmission 35 27 Smart Picture and Sound Smart Picture feature offers you a choice of 5 picture settings namely Rich Natural Soft Multimedia and Personal Definition of Picture Settings Rich Brilliant and sharp picture SMART settings suitable for bright Press the button repeatedly to cycle ing 8 ed environment through the settings to select your desired mode Natural Reference mode for living Natural room conditions and average signals Soft or Soft Intended for bad quality Rich Multimedia signals Suitable for living room viewing Personal Multimedia Best for graphical Note The Personal setting is the dvd applications setting that you set up using the Picture menu in the main menu This is the only setting in the Smart Picture setting that can be changed All other settings are pre set at the factory for your convenience Personal Pictures settings are set to your preference Smart Sound feature offers you a choice of 4 sound settings namely Movie Music Voice and Personal Definition of Sound Settings Movie Emphasize sensation to SMART action Press the button repeatedly to cycle through the settings to select your desire
48. services To return to previous menu press the 4 key T B Press the key to exit the menu 10 2 Reinstall all services This menu allows you to reinstall all the digital TV channels and radio stations MENU From the digital mode press the key to display the setup menu Use the w key to select installation and press gt key Select Service setup v and press gt key Select Reinstall all services v and press gt key Setup 11 28 Installation gt Service setup Add new services Search Reinstall all services TV channels found Radio stations found Other services found Store Discard Manual Install services Reinstall will remove all service settings e e e O Close Press the key to start the installation A search is then made for all digital services which are then stored automatically When the search is completed the menu will indicate the number of digital services found B Press key to store the services To return to previous menu press the 4 key MENU El Press the key to exit the menu 10 3 Manual install services This menu allows you to manually scan services by keying in the frequency of your target channel MENU From the digital mode press the key to display the setup menu Use the v key to select installation and press gt key Select Service setup v and press gt key Select Manual install services v and press gt key Set
49. settings in the Picture and Sound menu MENU Press the key Press the A v keys to select Picture or Sound Press gt key to enter Picture or Sound menu D PHILIPS Picture Brightness Colour Contrast Sharpness Colour Temp Contrast NR PHILIPS Equalizer Balance AVL Incr Surround Press A v keys to select a Picture or Sound setting Press gt key to enter the Picture or Sound setting J Press av keys to adjust the Picture or Sound setting To return to previous menu press the 4 key MENU El To exit the menu press the key Description of the Picture settings Brightness this changes picture brilliance Colour this changes the intensity of the colour Contrast this changes the difference between the light and dark tones within the contrast range of the TV Sharpness this increases or decreases the sharpness level to improve details in the picture Colour Temp this changes the colour setting Cool more blue Normal balanced or Warm more red Contrastt Increases the contrast range of the TV Select On option to activate feature NR improves noisy picture little dots on picture due to weak signal transmission Select On option to activate feature Description of the Sound settings Equalizer to adjust the sound tone Balance this balances the sound on the left and right speakers AVL Automatic Volume Leveller this i
50. splayed While navigating the digital teletext there is a short delay while the page downloads A prompt or message is often broadcast on the page to let you know the progress Analogue teletext in Digital mode Note Available in all countries If you see an icon TXT on a digital channel without digital teletext services it indicates Analogue Teletext is available in Digital mode Press the key to access Analogue teletext Note If UK country is selected during installation press and hold key for at least 3 seconds To use Analogue Teletext functions see page 38 and 39 25 19 Using the Conditional Access Module CAM The Conditional Access Module CAM menu provides access to functions contained on the CAM The module can be inserted into the Common Interface CI slot located at the backside facing downwards of the TV Note This Common Interface Cl module does not come with the TV set It can only be obtained when you subscribe to service providers like Pay TV or other service providers IMPORTANT Always switch the TV off before inserting or removing the module Inserting the CAM HB switch off the TV Connectors at rear of TV facing downward Common Interface slot 75 0 i HDMIZ 6 Qe LE Module 26 Some modules come with a viewing card When using this type of module first insert the viewing card
51. st to select TV Analogue Digital TV or connected peripheral equipment EXT EXT 2 EXT 3 EXT 4 HDMI or HDMI 2 Use the a_v keys to select source and the key to confirm selection Options ro See page 23 Cancel In digital mode this key functions as an exit key for MHEG teletext if there are no colour key links that are available to exit teletext mode PHILIPS TELEVISION Y Teletext See page 38 39 MENU Digital menu Bex To display exit from the digital menu when TV is in digital mode OK OK Confirms selection and accesses the program list in Digital mode Volume VOL To turn on sound louder or quieter Mute Turn off or on sound D 8 Numerical keys 9 For direct access to programmes For a two digit programme number the 2 digit must be entered shortly after the first digit before the dash disappears Screen information In digital mode display exit the information banner see page 14 In analogue mode display remove the programme number the sound mode the clock and the remaining time of the sleep timer pius i Active Control Automatically adjusts the picture setting for optimal picture quality continuously under any signal conditions See page 34 Digital TV Radio In digital mode
52. ster System to select the menu language Note If you have selected the wrong language for one reason or another and do not understand the selected language to operate the set do the following to bring you back to your preferred language MENU Press the key to exit menu from screen MENU e Press the Gem key again to display menu Press the v key to select the second item on the menu and the P key to enter into the next menu level Press the gt key to again and use the key to select the fifth menu item Press the gt key to enter into the next menu level e Press the A v keys to select correct language Press the key to confirm selection e Press the 0 screen i key to exit menu from Location settings Country to select the country where you are located caution If you select a wrong country the channel numbering will not be according to the standard for your country and you may not receive all services or nothing at all Note that the Language can be selected independently from the Country Time zone to select the time zone where you are located 19 English 13 Access restrictions This menu allows you to set up the access restrictions for the digital channels TV channels select the TV channel you want to lock and press key MENU lll From the digital mode press the key to display the setup menu Radio stations select the radio s
53. tall and the gt o9 key to enter the Install menu PHILIPS Main Picture Sound Features Install Press the v key to select Auto Store and the gt key to start automatic searching of the channels All the available TV programmes will be stored This operation takes a few minutes The display shows the progress of the search and the number of programmes found PHILIPS Auto Store IMPORTANT To exit or interrupt the search before it is completed press the key If you during 5 fen all channels will be stored For all channels to be stored you need to do a complete auto store search again Note ATS Automatic Tuning System feature If the transmitter or cable network sends the automatic sort signal the programmes will be numbered correctly In this case the installation is complete If this is not the case you can use the Sort menu to number the programmes to your preference ACI Automatic Channel Installation feature If a cable system or a TV channel which broadcasts ACI is detected a programme list appears Without ACI broadcast the channels are numbered according to your language and country selection You can use the Sort menu to renumber them 6 Note You cannot change the Language or Country in Analogue mode If you want to change the Language or Country you have to exit Analogue mode and enter into Digital mode to do so refer to Preferences on
54. tations you want to lock and press key Change pin code press gt key to enter in the menu Follow the on screen instruction to change your access code The default pin code is 1234 If you have forgotten your personal code you can reset to the default pin code 1234 by entering the universal code 0711 Use the v key to select Access restrictions and press the gt key Press the gt key to enter into the Set pin code protection menu Access restrictions Set pin code protection eg On Off Maturity rating e TV channels Note Radio stations e Change pin code The TV is equipped with a Common Interface Cl slot see page 26 This CI module can be obtained when you subscribe to service providers like Pay TV or other service providers The Cl module does not come with the TV set Switch pin code protection on or off o OClose O Use the 4 keys to set to On option and press key to exit You can then access the other adjustments Q Warning The moment you use any kind of access restriction you need to fill in the pin code when you schedule a programme The Access Restrictions menu will show the Cl Access Restrictions when a Cl module is installed The Cl module is responsible for the messages and texts on screen In case of failure or strange behaviour you must call your Cl service provider for recording To return to previous menu press the 4 key 4 MENU B
55. television keys and connectors 3 1 Side or top controls Use the side or top keys to control power menu volume and programme number VOLUME POWER to switch the TV on and off amp Note For zero power remove the mains cord from the mains socket PROGRAM to select programmes MENU to display or close menus The PROGRAM keys can be used to select a menu item and the VOLUME keys can be used to enter into the selected menu item and make adjustments VOLUME make the volume louder or quieter 3 2 Rear connectors The rear connectors are located on the rear of the TV and face downward The following connectors are located on the rear of theTV ci Common Interface slot to connect a CAM Conditional Access Module and a smart card TV Aerial socket Insert the aerial plug into the 75 IP socket HDMI 1 HDMI 2 to connect to set top box DVD player recorder High Definition equipment or Personal Computer EXT4 to connect to equipment like DVD Decoder which have the same sockets EXT 1 RGB and 2 CVBS S VIDEO connect to equipment like DVD player recorder VCR Decoder which have similar connections so called scart connections 3 3 Side connectors These connectors are located on the side of the TV EB Headphone Connect the phono jack to the headphone connector of the TV Audio Video to connect to the camera or
56. the A v key repeatedly to select programme you want to skip m PHILIPS Install Auto Store Manual Store Sort Name Fav Program Press the gt ok key to skip the programme The on the right of the menu will disappear indicating the programme is skipped D PHILIPS Install 100 Auto Store Manual Store Sort Name B To return to previous menu press the 4 key MENU To exit the menu press the key Q Tip To add back the skipped programmes to your favourites list repeat steps i E Press the A v key repeatedly to select the skipped programme you want to add back to your favourite programme list e Press the gt key to unskip a programme The V will appear indicating the programme is now restored 31 25 Features 25 1 Timer The Timer feature allows you to set the TV to switch to another channel at a specified time while you are watching another channel You can also use it as an alarm to switch on the TV at a specified time from standby mode For the timer to function the set must not be switched off Once the set is switched off the timer is disabled MENU ll Press key Press A v keys repeatedly to select Features and the key to enter Features menu PHILIPS Main Picture Sound Features Install Press gt key to access Timer y menu Press A keys to select a Timer item D PHILIPS Timer Sleep Tim
57. the jacks of TV EXT3 correct way and if the resolution and the Press the key on the remote signal standard of the connected equipment control to display Source list are set in the right way See the user manual Press the v key to select HDMI 1 or for your equipment HDMI 2 and press the key to confirm selection Supported PC resolutions 32 7 Connecta PC 640 x 480 60 Hz 800 x 600 75 Hz 640 x 480 72 Hz 800 x 600 85 Hz 640 x 480 75 Hz 1024 x 768 60 Hz Note 640 x 480 85 Hz 1024 x 768 70 Hz 800 x 600 60 Hz 1024 x 768 75 Hz Only digital output of the PC can be 800 x 600 72 Hz 1024 x 768 85 Hz connected via DVI to HDMI cable VGA connection is not supported PC resolutions for LCD TV Not applicable to 20 LCDTV or Plasma TV Before connecting your PC to the TV select your PC monitor settings to a refresh frequency of 60 Hz 1280 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 47 32 8 Connect a Camera Camcorder Game console EB Connect your camera camcorder or game console For mono equipment connect to 48 VIDEO 2 and AUDIO L 3 only For stereo equipment connect both AUDIO L and AUDIO 3 S VHS quality with an S VHS camcorder is obtained by connecting the S VHS cables with the S VIDEO input D and AUDIO L R inputs 3 e Warning do not connect cables D and Q at the same time This may cause picture distortion Press the key on the remote control
58. to display Source list Press the w key to select EXT 3 and press the key to confirm selection Connectors at side of TV 32 9 Connect a Headphone Wl Insert the plug into the headphone socket as shown The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm jack Press the key on the remote control to switch off the sound from internal loudspeakers of the TV To switch on sound press the key again Connectors at side of TV 33 Troubleshooting Below is a list of symptoms you may encounter with your TV Before you call for service make these simple checks No display on screen Check whether power cord is properly connected into the mains socket and to your TV If there is still no power disconnect plug Wait for 60 seconds and re insert plug Switch on TV again Press the key on the remote control Poor reception Check antenna connection to the TV and to the wall antenna snowy noise socket Try manually adjusting your picture see page 28 Have you chosen the right TV system see to page 28 Press the key to check the signal strength Verify if the supplied cables are connected properly The aerial cable to the TV the other aerial to your recorder the power cables Verify if you have selected the correct source Verify if the child lock has been switched off No sound on Check whether the correct TV system
59. u Installation gt Service setup Add new services e Reinstall all services Manual install services 85 Frequency Network name Signal quality Signal strength Services found Store Discard Manual install services Close Use the frequency of your target channel and press key to start the searching of channels When the search is completed the menu will indicate the number of digital services found B Press the key to store the services To return to previous menu press the 4 key MENU El Press the key to exit the menu 17 11 English Test reception This menu allows you to check the strength of the signal you are receiving through your aerial MENU From the digital mode press the key to display the setup menu Use the v key to select Installation and press the key Setu Installation Testreception e Service lists Service setup Frequency Network name Signal quality Signal strength Test signal quality 18 Use the key to select Test reception and press the key You obtain an indication of the actual programme frequency the network name the signal quality and strength Use the gt key to enter the Frequency slot and use the you want to test Use the key to move to the next character space If the test reception indicates that the signal strength is indeed poor you can try improving r
60. u The Mode Selection allows you to select between the PC and HD mode MENU H Press key Press A v keys repeatedly until Features is selected and press key to access Features menu Press v key to select Mode Selection PHILIPS D Features Timer Child Lock Parental Lock Mode Selection Active Control 42 Press the gt key to access Mode Selection mode Press the A v keys to select PC or HD mode El To return to previous menu press the 4 key MENU To exit the menu press the key 31 4 Display native 1080 in Features menu Note This Display native 1080 feature is only applicable to 1080 models only When you connect HD High Definition equipment HDMI or Y Pb Pr supporting resolution of 1080i the Display native 1080 feature will be available in the Features menu This feature allows you to watch the original HD format 1080i only This is a true HD resolution from your input signals MENU ll Press key Press A v keys repeatedly until Features is selected and press gt key to access Features menu Press v key to select Display PHILIPS D Features Timer Child Lock Parental Lock Active Control Display Press the gt key to access Display mode Press the gt key twice to access the Off On option in the native 1080 PHILIPS D Display native 1080 B Press the a v keys to select Off On opt
61. ures Timer Child Lock Active Control Key in the access code 0711 by the Digit 0 9 keys A message Incorrect will appear Key in the access code 0711 again The TV will then prompt you to change code Key in your own 4 digit code by the Digit 0 9 keys and confirm the new code Once the new code is confirmed the Parental Cont menu will appear D PHILIPS Parental Cont Lock Program Change Code Clear All Lock All In the Parental Cont menu use the A MENU 4 gt Digit 0 9 and Gv keys to access and activate the Parental Cont functions Description of the settings Lock Program Lock individual program Press gt key to enter Lock Program mode and the A v keys to select the program to lock or unlock Press the keys to lock or unlock selected program key lock symbol appears besides the locked channel number To exit from Lock Program mode and return to Parental Cont menu press MENU Change Code Key in your new four digit code using the Digit 0 9 keys and confirm by keying in the new four digit again Clear Press gt key to unlock all locked channels Lock Press gt key to lock all locked channels Note If you switch on the TV set and select a program that has been locked you need to key in the Access Code to enter the selected locked channel To unlock the channel go the Lock Program in the Parental Cont menu and press the 4 keys
62. vailable No digital channels Possible solutions Contact your dealer about the Digital Video Broadcasting Terrestrial signal availability in your country e This symptom is not a problem The liquid crystal panel is built with very high precision technology giving you the fine picture details Occasionally a few non active pixels may appear on the screen as a fixed point of red blue green or black Note this does not affect the performance of the set Noise is displayed if the connected digital equipment such as DVD player or Set Top box failed Check user manual of the digital equipment you are connecting Use a standard compliant high quality HDMI to DVI cable Press the key on the remote control Check whether connections are correct see page 47 Check whether the source is correctly selected Press button to enter Source list and select the correct source Check whether you have configured the computer to a compatible display resolution see page 47 Check graphic card setting of PC Check whether SVHS cable is properly connected Press the P key on the remote control to do a channel up and then press the P key to do a channel down Change PC refresh rate to 60 Hz AC3 is not supported for this set Use the key on the remote control to select an alternative audio TV antenna cannot be Some TV antennas need to be powered by the set powered by set This set does

Download Pdf Manuals

Related Search

Related Contents

  BAHA 4 - Euro  PDF137KB  Mode d'emploi  Olympus CAMEDIA MAUSB-1 User's Manual  Smart ME Controller PAR-U02MEDA  

Copyright © All rights reserved. Failed to retrieve file