Philips 29PT2204 29" real flat TV
Contents
1. Activate Display Use the key to select Timer You can block certain channels or inhibit use of the TV set completely Note You can only access the locked channels via the remote control Keep the remote control in a safe place Press use the key to select Features and press the key The Features menu is displayed Picture Sound Ti Access Code v Child Lock XXXX Install Format Correct DCV DCV demo Use the key to select Child Lock and press the key to enter Key in the 4 digit access code for the first time or if you have forgotten the code enter 0711 twice There will be a prompt to key in the New Code Key in your preferred code once and again to confirm This feature enhances your viewing pleasure by providing you with a choice of two picture formats 4 3 and Expand 4 3 Press use the or key to select Features and press the key The Features menu is displayed Use the key to select Format and press the key to select 4 3 or Expand 4 3 Press the key to exit Picture m Sound e Timer ecbeatures Format Install A Eye Fi DigiSignalMeter Games The Eye Fi monitors and adjusts incoming video signals to help provide the best picture quality When you choose to turn the Eye Fi to On or Display On the Brightness Colour Contrast Sharpness Digi Contrast and Digi Picture features are controlled automatically Eye Fi adjusts these pi2. type batteries making sure that they are the right way round If remote control is not used for a long period of time remove the batteries and store it in a cool dry place Switching on To switch on the set press the on off key A red indicator means that the television is on standby mode Refer to the next page on Remote Control keys for the various keys that you could use to switch on the set An indicator light will flash when it is receiving signal from the remote control The keys on the TV set The television set has 4 keys which are located at the top or front INSTALL MENU VOLUME CHANNEL The Volume keys are used to adjust the sound levels The Channel keys are used to select channels To access or exit the main menu press down the Volume keys simultaneously To select an item in the main menu press the Channel key To select an adjustment press down the Volume key B Safety information information e Disconnect mains plug when the indicator light below the TV screen is flashing continuously a bright white line is displayed across the screen there is a lightning storm the set is left unattended for a prolonged period of time e cleaning the TV screen Never use abrasive cleaning agents Use a slight damp chamois leather or soft cloth e No naked flame so
3. Format a Install DigiSignalMeter Features A a Timer YPower Saver a Format Features A a Timer VPower Saver a Format eDigiSignalMeter a Eye Fi m Games a Picture Timer a Sound Child Lock VYFeatures pb Format a Install D C V Features A a Timer Game a Child Lock Play a Format Help line aD C V aDigiSignalMeter VGames gt VGame Super Race a Play a Help line AE SPECIFICATIONS 38W 10 50W 10 39 W 10 Net Weight appx only 9 5 Kg 18 Kg 39 W 10 55 W 10 55W 10 60W 10 e SPECIFICATIONS Depth 114W 10 85W 10
4. O O O O 4 3 Expand 4 3 select this format if you want to expand pictures transmitted in a letterbox format black horizontal bars at the top and bottom of the screen to fill up the entire screen Letterbox Enter Features menu as described in Features settings on the previous page Use the key to select Eye Fi and press the key to select Off On or Display On Press the key to exit Description of option Off the Eye Fi will not be activated On the Eye Fi will work to give the viewer the best possible picture but will not display the monitoring screen when channels are changed Display On an Eye Fi monitoring screen will be shown for a few seconds whenever a channel is changed DigiSignalMeter is an intelligent feature which measures the incoming signal and graphically represents the signal strength on your TV screen Note Default mode for Intelligent TV visible under Picture sub menu only when Eye Fi isswitched On is either Auto Off depending upon the signal condition It can be switched On if default Off for further improvement in picture quality switch off Intelligent TV if it interferes with the picture status is stored per channel The DCV monitors and adjusts incoming video signals to help provide the best picture quality When you choose to turn the DCV to On or Display On the Brightness Colour Contrast Sharpness Digi Contrast and Digi Picture features are co
5. User Manual Congratulations i on becoming the proud owner Philips Colour Television of a Congratulations on becoming the proud owner of a Philips CTV Your television set has been designed engineered and tested to very high standards to provide superior quality Picture and Sound for your enjoyment Philips Colour Television means that the best design reliability and quality are ensured with every set manufactured In addition your set complies with International Safety Standards IEC 65 Your television set has a host of features Please read this Operating Instructions booklet carefully and get to know about your set We wish you a very enjoyable viewing on your new Philips Colour Television SuperiorPictu Features depends on specific to type no of model Specification are subject to change without notice reClarity PHILIPS 3115 116 15963 Installing your television set Positioning the television set f 10 cm Place your TV on a solid stable surface leaving a space of at least 10 cm around the appliance Connections e Insert the aerial plug into the I socket at the rear of the set If you are using an indoor aerial reception may be difficult in certain conditions You can improve reception by rotating the aerial If the reception remains poor you will need to use an external aerial Insert the mains plug into a wall socket Remote control Insert the two R
6. atically This operation takes a few minutes The display This menu is used to store all available channels automatically Press the key With the cursor select the Install menu shows the progress of the search and the and follow by the Auto Store number of channels found O To quit the menus press Picture Sound lt Features Language v Auto Store a Sort ETRA Store Channel 2 470 MHz eoeeeeveeeeeee gt eeoeveveveeeeee ee Manual Store Store This menu is used to store channels one at a Sound Sys tem use the or time key to select the desired sound system BG I DK or M Press the key Search Press The search starts 2 With the cursor select the Install menu Once a channel is found the scanning and follow by the Manual stops Go to the next step Channel enter the required channel with the or digit keys ESS Fine Tune if the reception is not Sound Sys z 5 Search satisfactory adjust using the amp or Channel keys l soe O Store Press The channel is stored C Repeat steps to for each channel you wish to store O To quit the menus press Colour Sys tem use the amp or key to select the desired colour system Auto PAL NTSC 3 58 or NTSC 4 43 This feature allows you to rearrange channels according to your preference Press the key The Main menu is displayed on the screen With
7. cture settings continuously and automatically Picture z lt Seund e Timer W Features Format Install e DigiSignalMeter Eye Fi Display On gt e Games n eiO Description of function Time enter the current time Start Time enter the time for the TV to switch on or to switch channel Stop Time enter the time to switch to standby Note If Stop Time is not keyed in Tv will go to standby mode after 4 hours To switch on the TV from standby press Channel or digit or Power key Channel enter the channel to switch to Activate enter mode of activating timer Once Daily or Off Display select On to display the time on the TV screen Press the key to exit CITI The Child Lock menu is displayed Use the or key to select a function and the key to enter or confirm selection Child Lock A Change Code Clear All Lock All Description of function Lock Channel use the or key to select a channel number to lock and press the key to confirm The symbol will display next to the channel that was locked Change Code enter a new code and again to confiorm Clear All use to unlock all locked channels Select On to activate Lock ALL use to lock all TV and external channels Select On to activate Press to exit Description of function 4 3 select this format if you want to display a conventional picture using the full surface of the screen
8. ide Delete Personal Zapping list Deletes stored channels from Personal Zapping list Smart Picture Used to access a series of stored settings Rich Natural Soft DVD VCD or Personal Incredible Surround To activate disable the Incredible Surround feature In stereo the speakers appear further apart In mono a pseudo spatial effect is obtained IIO During stereo transmission in AV mode to switch from Stereo to Mono During dual sound transmission to switch betwen language I or IL Channel selection To access the next or previous channel The number and sound mode are displayed for a few moments whenever you select a new channel Mute To mute or restore sound On screen display To display clear the on screen information Press the key for 3 seconds to activate permanent display of channel number This key is also used to exit from the menu F Before Calling Service Calling Service Below is a list of frequently occurred symptoms Before you call for service make these simple checks Some of these symptoms can easily be rectified if you know what to do Symptom What you should do Colour patch e Switch off the TV by the mains power button Wait for 20 uneveness minutes before switching on again e Check the TV is not placed too near speakers or magnetic objects No power e Check the TV s AC power cord is plugged into the mains socket If there is still no power disconnect plug Wait for 60 sec
9. le I 56 Features Bass Install e Balance AVL Digi Bass Use the amp or ED key to select a setting and the or key to adjust Press to exit Features settings Press select Features and press The Features menu will be called up CE Picture Timer Sound Power Saver Features A Format Install DigiSignalMeter Eye Fi Games Description of the adjustments e Treble this alters the high frequency sounds e Bass this alters the low frequency sounds e Balance this balances the sound on the left and right speakers e AVL Automatic Volume Leveller this is used to limit increases in sound especially on channel change or advertising slots e Digi Real Audio Incredible Surround this boost the effect of stereo sound e Digi Bass this is used to enhance bass output Description of the features e Timer Child Lock Format Eye Fi Dcv Dcv demo Power Saver DigiSignalMeter Game see explanation on the next few pages This feature allows you to set the timer to switch to a channel at a specified time while you are watching another channel or when the TV is on standby mode Note Timer will be disabled once the set is switched off Press use the key to select Features and press the key The Features menu is displayed Main Mereatures A eee v Timer gt Time Format Start Time Install DigiSignalMeter Stop time Eye Fi Channel Games
10. mplifier Make the connections as shown With the key select the channel Side For a monophonic device connect the audio signal to the AUDIO L input Use the key to reproduce the sound on the left and right speakers of the TV set Headphones When headphones are connected the sound on the TV set will be cut The VOL or keys are used to adjust the volume level The headphone impedance must be between 32 and 600 Ohms E CENTERIS control keys Personal Zapping You can surf up to 10 personal channels for each key Sleeptimer Selects a period of time after which the TV will go into standby mode automatically Add Personal Zapping list Adds and stores channels into Personal Zapping list Smart Sound Used to access a series of stored settings Theatre Music Voice Hall Indipop Raga Orchestra Bhajan Disco Opera Bhangra Gazal Personal Menu To call up or exits menus Cursor These 4 keys are used to move around the menus or provide direct access to the different picture formats Volume To adjust the sound level Digit keys Direct access to the channels For a 2 digit channel enter the 2nd digit before the dash disappears Alternate channel Switched between the current and the previous channel Standby Lets you place the TV set on standby To turn on the TV press CH or D AV A CH or digit keys AV channel selection Press several times to select AV1 CVI AV2 YPbPr or S
11. n now play your disc Note You need to select the channel CVI manually to playback DVD disc Connect the TV s yellow white and red AV2 in jacks to the corresponding Video and Audio jacks on the player Connect the TV s red and white R and L AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player Match the cable colour to the jacks colour The red jack is the Right audio channel and the white jack is the Left audio channel Turn on the TV and VCR player Set the TV to channel AV2 You can now play your video cassette tape Connection is also possible via the aerial cable You will therefore need to tune in your video recorder s test signal and assign a channel number 0 Select channel 0 to playback D Connecting peripheral equipment Other equipment gt c x f amp a amp of op eee Lu ass as 5 S qa q gt q q etb ee f ti U J a Carry out the connections as shown To optimise picture quality connect the equipment which produces the video signals digital decoder games etc to AV1 in and equipment which produces the S Video signals S Video and Hi 8 video recorders certain DVD drives to AV2 in and all other equipment to either AV1 in or AV2 in To connect to a hi fi system use an audio connection cable and connect the L and R outputs on the TV set to the AUDIO IN L and R input on your hi fi a
12. ntrolled automatically DCV adjusts these picture settings continuously and automatically Picture A Sound Timer Child Lock Install Format DCV Display On gt DCVdemo LE ncy Enter Features menu as described in Features settings on the previous page Use the key to select DCV and press the key to select Off On or Display On Press the key to exit Description of option Off the DCV will not be activated On the DCV will work to give the viewer the best possible picture but will not display the monitoring screen when channels are changed Display On an DCV monitoring screen will be shown for a few seconds whenever a channel is changed Light Sensor On The picture get s adjusted to ambient room light Note Intelligent TV On Off allows for further improvement in picture quality switch off Intelligent TV if it interferes with the picture The split screen display shows the image performance before and after enhancements to present clearly the effects of the picture enhancement features E Picture 7 lt Sound e Timer e Child Lock Install Format DCV WDCVdemo On P C ea i Enter Features menu as described in Features settings on the previous page Use the key to select Demo and press the key to select On or Off A list or series of favourite TV programs can be selected and stored in the 4 coloured keys with the Personal Zapping fea
13. onds and re insert plug Switch on the TV again No picture e Check the antenna connection at the rear of the TV e Possible TV station problem Try another channel Good picture e Try increasing the volume but no sound e Check that the sound is not muted If it is muted press the Mute button on the remote control to restore sound Good sound but poor e Try increasing the contrast and brightness setting colour or no picture Snowish picture and e Check antenna connection at the rear of the TV noise Horizontal dotted lines e Possible electrical interference e g hairdryer vacuum cleaner etc Switch off appliances Double images or e Possible poor positioning of antenna Using a highly Ghost images directional antenna may improve reception TV not responding to e Check life span of batteries of remote control handset remote control handset e Aim remote control handset directly at remote control sensor lens on the TV No colour in picture e Select your desired colour system manually if reception is poor inAuto mode One white line across e Switch off the TV immediately and call for after sales service Doming e A prolonged view of very bright static picture can lead to devlopment of uneven colour patches in some portions of the screen This is not a defect and will disappear in few minutes after moving picture resumes G CETO Store Use the key to start auto store All the available TV channels will be stored autom
14. sh to change To quit the menus press Press the key The Main menu is displayed on the screen With the cursor select the Install menu followed by the Edit menu Enter into the menu and select the channel number you wish to skip by the digit keys Then use the key to select Skipped Use the key to select On Repeat steps and for each channel you wish to skip To quit the menus press To restore skipped channels Repeat steps to amp above Use the key to select Skipped and the key to select Off Repeat steps and for each channel you wish to skip To quit the menus press A Picture settings re settings Description of the adjustments e Brightness this changes picture brillance e Colour this changes the intensity of the colour e Contrast this changes the difference between the light and dark tones e Sharpness this changes the picture definition e Hue this adjusts the skin colour tone in NTSC channel e Digi Color this changes the colour rendering Cold bluer Normal balanced or Warm redder e Digi Picture attenuates picture noise snow in difficult reception conditions e Digi Contrast automatic adjustment of the picture contrast which permanently sets the darkest part of the picture black Sound settings settings Press select Sound and press The Sound menu will be called up a Sound a V Treb
15. the cursor select the Install menu followed by the Sort menu Use the amp or key to select the channel number you want to change Picture Sound Features e Language 091 e Auto Store 092 Manual 093 094 Edit 095 Language 000 e Auto Store 001 gt e Manual 002 003 Edit 004 005 Channel edit This feature allows you to skip or edit channels which have bad or weak TV signal or channels you do not watch often Once a channel is skipped you cannot have access to it by the Channel or key You can only access the channels by the digit 0 9 keys Picture Sound Features Language S Auto Store Skipped e Manual Sort i Edit gt YA Channel 2 gt Skipped Press then The Picture menu will be called up Main Y Brightness Sound Col Features olour Install e Contrast Sharpness e Digi Colour Digi Picture Use the or keys to select a setting and the or ke Note during the picture adjustment only the selected line remains displayed Press or to display the menu again Press to exit 0 Gi from e g 001 and confirm selection with the key Use the or key to select the channel number you want to change to e g 004 and confirm selection with the key The change is done Channel 4 will move up to channel 3 and channel 3 will move up to channel 2 O Repeat steps and for each channel you wi
16. ture With this feature you can easily viewed up to a total of 10 preferred channels for each coloured key To add channels Select a channel with the digit keys Press to display list Press your favourite colour key to store the channel in step O Repeat steps to to store more channels O Press to exit 18 4 Select List TX FoR EXTENT Power Saver Power Saver is an environmentally friendly feature which reduces power consumption of your TV by switching to optimal settings for picture and sound gt gt Select Power Saver on or Select steps of 30 minutes upto 180 minutes Select Game Toggle Between Super Race lt gt Power Ludo lt gt Cricket lt gt Power Word gt Select Play to start playing or Help Line for Rules CATAD Demo The screen is split to dramatically show the comparative images side by side without picture with picture enhancements enhancements M Personal Zapping Zapping To delete channels Select and press a colour key that has stored channels repeatedly to select the channel you want to delete Press to display list Press to remove channel Repeat steps to delete more channels O Press to exit El fO Remove Item Press To view channels Select and press a colour key that has stored channels repeatedly to select the channel you want to view a Picture Timer a Sound Power Saver VFeatures p gt
17. urces such as lighted candles should be placed on top of the TV or in the vicinity e Do not place your TV set under direct sunlight or heat e Leave at least 10 cm around each side of TV set to allow for proper ventilation e Avoid placing your set e g near the window where it is likely to be exposed to rain or water e No objects filled with liquids should be placed on top the TV so as to avoid dripping or splashing of liquids on the set Useful information information e Do not leave your set on standby mode for a prolonged period of time Switch off set to allow it to be demagnetised A demagnetised set supports good picture quality e Do not shift or move the set around when it is switched on Uneveness in colour in some parts of the screen may occur e Never attempt to repair a defective TV yourself Always consult a skilled service personnel Connecting peripheral equipment DVD player wD wet Video recorder Connect the TV s green blue and red Y Pb Pr AV1 in jacks to the corresponding COMPONENT VIDEO OUT jacks on the player Connect the TV s red and white R and L AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player Match the cable colour to the jacks colour The red jack is the Right audio channel and the white jack is the Left audio channel Turn on the TV and DVD player Set the TV to CVI and DVD background screen will come on the screen You ca
Download Pdf Manuals
Related Search